SU-IM-IE SUPPORTS AND CLUTCHES. Technical Catalogue

Transcription

1 SU-IM-IE SUPPORTS AND CLUTCHES Technical Catalogue May 6

2 The company Brevini Fluid Power, part of the Brevini group, was established in in Reggio Emilia where it has its head office. Brevini Fluid Power manufactures hydraulic components and application packages: a very large range suited to several operational requirements and applications thanks to a strict interaction between mechanical, hydraulic and electronic components. Brevini Fluid Power is among the top manufacturers in Italy and a major player in Europe and in the world. International presence Brevini Fluid Power operates internationally with 5 branches all over the world placed in major industrialized countries: Italy, ance, Germany, English, Romania, Holland, Finland, China, India, Singapore and the United States. The network is constantly expanding by opening new branches in just a few years. The branches are guided by managers that have an excellent knowledge of their own country. The advantages this brings are evident: The production facilities are located throughout Reggio Emilia, Ozzano Emilia (BO), Noceto (PR), Novellara (RE), Yancheng (province of Jiangsu, China) which was inaugurated in 9 and became operative since. Competitive Strategy Innovation combined with the focus on customers is the strength of the Brevini Fluid Power brand, born from the forty-year-long Brevini Fluid Power proposes itself as a local hub, as it happened to BPE Electronics in 8 and OT Oiltechnology in 9, in order The purpose is still the development of a very large range of products forming together integrated packages able to meet various application needs. Our ten-year-long partnership relations with hundreds of customers all over the world are the best synthesis of Brevini Sharing of know-how and several experiences have made Brevini Fluid Power a more global company, more incisive in international markets and closer to its customers. Product lines The product lines are numerous and well-structured aimed to cover every needs: a strong basis on which to develop the engineering of application packages and complete systems. The offer is improving in the direction of a solution supplier often developed in co-design with the customer, both for the mobile and industrial sector. Hydr-App Product Line: Hydraulic power packs and mini hydraulic packs (whether standard or customised), cartridge valves and solenoid valves, gear boxes and transmission components. S.A.M. Hydraulik Product Line Aron Product Line blocks. Brevini Hydraulics Product Line: Proportional directional valves, joysticks and electronic modules. BPE Electronics Product Line VPS Brevini Product Line OT Oiltechnology Product Line

3 SUPPORTS AND CLUTCHES SUPPORTS SU/-C Support with cylindrical shaft for pump GR..... SU/-D Support with tapered shaft for pump GR..... SU/-C Support with cylindrical shaft for pump GR..... SU/-D Support with tapered shaft for pump GR SUR/-C Reinforced support, cylindrical shaft for pump GR SUR/-D Reinforced support, tapered shaft for pump GR SU/-C Support with cylindrical shaft for pump GR SU/-D Support with tapered shaft for pump GR SU/,5-C Support with cylindrical shaft for pump GR SU/,5-D Support with tapered shaft for pump GR SU/Univ Universale support, cylindrical shaft.... SU/ZF-C Support with cylindrical shaft for pump GR. BOSCH.... SU/ZF-D Support with tapered shaft for pump GR. BOSCH.... SU/5-8-P Support with tapered shaft for front flange GR. BOSCH....5 SU/5-8-R Support with tapered shaft for front flange GR. BOSCH....6 SU/SAEA-R Support with tapered shaft for front flange SAE A....7 SU/-86-F Support with tapered shaft for front flange GR SU/-86-E Support with tapered shaft for front flange GR.T....9 SU/-86-H Reinforced support, tapered shaft for front flange GR..... MECHANICAL CLUTCHES IM5 Mechanical clutch, cylindrical shaft flange for pump GR IM Mechanical clutch, cylindrical shaft flange for pump GR.-/SAE A/SAE B... IM Mechanical clutch, cylindrical shaft....5 IM Univ Mechanical clutch, DIN 58 Z shaft....7 ELECTROMAGNETIC CLUTCHES IE Electromagnetic clutch - OIL LUBRICATION.... IEG Electromagnetic clutch - GREASE LUBRICATION.... FLANGES SU/IM Flanges for SU/UNIVERSALE - IM - IM/UNIVERSALE.... IM/IE Flanges for IM - IE (oil lubrication).... IM5 Flanges for IM5.... IEG Flanges for IEG (grease lubrication) Brevini Fluid Power S.p.A. All rights reserved. Hydr-App, SAM Hydraulik, Aron, Brevini Hydraulics, BPE Electronics, VPS Brevini, OT Oiltechnology, logos are trademarks or are registered trademarks of Brevini Fluid Power S.p.A. or other companies of the Brevini Group in Italy and other countries. The technical features supplied in this catalogue are non binding and no legal action can be taken against such material. Brevini Fluid Power will not be held responsible for information and specifications which may lead to error or incorrect interpretations. Given the continuous technical research aimed at improved technical features of our products, Brevini Fluid Power reserves the right to make change that are considered appropriate without any prior notice. This catalogue cannot be reproduced (in while or in part) without the prior written consent of Brevini Fluid Power. This catalogue supersedes all previous ones. Use of the products in this catalogue must comply with the operating limits given in the technical specifications. The type of application and operating conditions must be assessed as normal or in malfunction in order to avoid endangering the safety of people and/or items. General terms and conditions of sale: see website The products shown on this catalog are parts of line.

4 SU/-C (cod. ) SUPPORT WITH CYLINDRICAL SHAFT FOR PUMP GR. 5, H B 8 h6 5,8 f 7 6 h9 R5 A 67, 5, 6, The SU/-C, is suitable for driving Gr. hydraulic pumps and motors, with belts, chain or other transmission, in which heavy combined loads take place (axial and radial). The pump/motor Gr., is directly flanged and connected by splined coupling (coupling to be ordered separately). 5x z DIN58 B M6.5 Sez. B-B , 5 6 A N n = n = 5 n = n = 5 n = (mm) Minimum radial load (*) = N Radial load (*) Axial load (*) Max. revolutions per minute Life (*) 5 hours Max. working temperature 7 C Grease quantity gr Type of grease DIN 588 NLGI classe (*) Nominal values calculated according to ISO 8. For more information, Ref. Code Description Q.ty Q58 O-Ring 5.x Cover Q585 O-Ring 55.56x.5 Q75 Snap ring E 5 5 Bearing 6 x6x.8 6 Cylindrical shaft 7 Q776 Woodruff A6x6x5 8 8 Shaft seal xx7 9 9 Body SU/- C SU/ = Belt pulley support C = Cylindrical shaft SU-C/IE//.

5 SU/-D (cod. ) SUPPORT WITH TAPERED SHAFT FOR PUMP GR. The SU/-D, is suitable for driving Gr. hydraulic pumps and motors, with belts, chain or other transmission, in which heavy combined loads take place (axial and radial). The pump/motor Gr., is directly flanged and connected by splined coupling (coupling to be ordered separately) n = n = 5 n = n = 5 n = (mm) Minimum radial load (*) = N Radial load (*) Axial load (*) Max. revolutions per minute Life (*) 5 hours Max. working temperature 7 C Grease quantity gr Type of grease DIN 588 NLGI classe (*) Nominal values calculated according to ISO 8. For more information, Ref. Code Descriprion Q.ty Q58 O-Ring 5.x Cover Q585 O-Ring 55.56x.5 Q75 Snap ring D. 5 5 Bearing 6 x6x Tapered shaft 7 Q757 Woodruff x Shaft seal xx7 9 9 Body Washer Q657 Nut M SU/- D SU/ = Belt pulley support D = Tapered shaft SU-D/IE//.

6 SU/-C (cod. ) SUPPORT WITH CYLINDRICAL SHAFT FOR PUMP GR. The SU/-C, is suitable for driving Gr. hydraulic pumps and motors, with belts, chain or other transmission, in which heavy combined loads take place (axial and radial). The pump/motor Gr., is directly flanged and connected by splined coupling (coupling to be ordered separately) n = n = 5 n = n = 5 n = (mm) Minimum radial load (*) = 55 N Radial load (*) Axial load (*) Max. revolutions per minute Life (*) 5 hours Max. working temperature 7 C Grease quantity gr Type of grease DIN 588 NLGI classe (*) Nominal values calculated according to ISO 8. For more information, Ref. Code Description Q.ty Q58 O-Ring 6,7x,6 97 Cover Q58 O-Ring 6,77x,6 Q755 Snap ring E5 5 5 Bearing 7 5x7x7 6 Q77 Woodruff A 6x6x 6 7 Cylindrical shaft 8 9 Shaft seal xx Body SU/- C SU/ = Belt pulley support C = Cylindrical shaft SU-C/IE//.

7 SU/-D (cod. ) SUPPORT WITH TAPERED SHAFT FOR PUMP GR. The SU/-D (tapered shaft), is suitable for driving Gr. hydraulic pumps and motors, with belts, chain or other transmission, in which heavy combined loads take place (axial and radial).the pump/motor Gr., is directly flanged and connected by splined coupling (coupling to be ordered separately) n = n = 5 n = n = 5 n = (mm) Minimum radial load (*) = 55 N Radial load (*) Axial load (*) Max. revolutions per minute Life (*) 5 hours Max. working temperature 7 C Grease quantity gr Type of grease DIN 588 NLGI classe (*) Nominal values calculated according to ISO 8. For more information, Ref. Code Description Q.ty Q58 O-ring 6,x,6 97 Cover Q58 O-ring 6,77x,6 Q755 Snap ring D5 5 5 Bearing 7 5x7x7 6 Woodruff,x6,5 7 8 Tapered shaft 8 9 Shaft seal xx Body Washer Q655 Nut Mx,5 SU/- D SU/ = Belt pulley support D = Tapered shaft SU-D/IE//.5

8 SUR/-C (cod. 7) REINFORCED SUPPORT, CYLINDRICAL SHAFT FOR PUMP GR. The SUR/-C, is suitable for driving Gr. hydraulic pumps and motors, with belts, chain or other transmission, in which heavy combined loads take place (axial and radial). The pump/motor Gr., is directly flanged and connected by splined coupling (coupling to be ordered separately) n = n = 5 n = n = 5 n = (mm) Minimum radial load (*) = 77 N Radial load (*) Axial load (*) Max. revolutions per minute 5 Life (*) 5 hours Max. working temperature 7 C Grease quantity.5 gr Type of grease DIN 588 NLGI classe (*) Nominal values calculated according to ISO 8. For more information, Ref. Code Description Q.ty Q58 -Ring 6.x.6 96 Reinforced cover Q58 -Ring 7.x.5 Q75 Snap ring E 5 5 Bearing 8 x8x. 6 8 Cylindrical shaft 7 Q77 Woodruff A6x6x 8 8 Shaft seal xx7 9 9 Reinforced body SUR/- C SUR/ = Belt pulley support C = Cylindrical shaft SUR-C/IE//.6

9 SUR/-D (cod. 8) REINFORCED SUPPORT, TAPERED SHAFT FOR PUMP GR. The SUR/-D (reinforced support, tapered shaft), is suitable for driving Gr. hydraulic pumps and motors, with belts, chain or other transmission, in which heavy combined loads take place (axial and radial). The pump/motor Gr., is directly flanged and connected by splined coupling (coupling to be ordered separately) n = n = 5 n = n = 5 n = (mm) Minimum radial load (*) = 77 N Radial load (*) Axial load (*) Max. revolutions per minute 5 Life (*) 5 hours Max. working temperature 7 C Grease quantity.5 gr Type of grease DIN 588 NLGI classe (*) Nominal values calculated according to ISO 8. For more information, Ref. Code Description Q.ty Q58 -Ring 6.7x.6 96 Reinforced cover Q58 -Ring 7.x.5 Q75 Snap ring D. 5 5 Bearing 8 x8x. 6 Q757 Woodruff x Tapered shaft 8 8 Shaft seal xx7 9 9 Reinforced body Washer Q655 Nut Mx.5 SUR/- D SUR/ = Belt pulley support D = Tapered shaft SUR-D/IE//.7

10 SU/-C (cod. ) SUPPORT WITH CYLINDRICAL SHAFT FOR PUMP GR. The SU/-C, is suitable for driving Gr. hydraulic pumps and motors, with belts, chain or other transmission, in which heavy combined loads take place (axial and radial). The pump/motor Gr., is directly flanged and connected by splined coupling (coupling to be ordered separately) n = n = 5 n = n = 5 n = (mm) Minimum radial load (*) = 77 N Radial load (*) Axial load (*) Max. revolutions per minute 5 Life (*) 5 hours Max. working temperature 7 C Grease quantity 9.5 gr Type of grease DIN 588 NLGI classe (*) Nominal values calculated according to ISO 8. For more information, Ref. Code Description Q.ty Q58 O-Ring 5.7x Cover Q58 O-Ring 7.x.5 Q75 Snap ring E 5 5 Bearing 8 x8x. 6 Q775 Woodruff A8x7x 7 55 Cylindrical shaft 8 Shaft seal 5x5x Body SU/- C SU/ = Belt pulley support C = Cylindrical shaft SU-C/IE//.8

11 SU/-D (cod. ) SUPPORT WITH TAPERED SHAFT FOR PUMP GR. The SU/-D (tapered shaft), is suitable for driving Gr. hydraulic pumps and motors, with belts, chain or other transmission, in which heavy combined loads take place (axial and radial). The pump/motor Gr., is directly flanged and connected by splined coupling (coupling to be ordered separately) n = n = 5 n = n = 5 n = (mm) Minimum radial load (*) = 77 N Radial load (*) Axial load (*) Max. revolutions per minute 5 Life (*) 5 hours Max. working temperature 7 C Grease quantity 9.5 gr Type of grease DIN 588 NLGI classe (*) Nominal values calculated according to ISO 8. For more information, Ref. Code Description Q.ty Q58 O-Ring 5.7x Cover Q58 O-Ring 7.x.5 Q75 Snap ring E 5 5 Bearing 8 x8x. 6 Q7575 Woodruff x Tapered shaft 8 Shaft seal 5x5x Body 5 Washer Q65 Nut Mxx.5 SU/- D SU/ = Belt pulley support D = Tapered shaft SU-D/IE//.9

12 SU/,5-C (cod. ) SUPPORT WITH CYLINDRICAL SHAFT FOR PUMP GR..5 +,6 6, H 8 DIN 58 - x6 z 5 5 B B,5 55,5 6,5 5 7 M-6H Sez. A-A 8 h 6 6, h 8 7,5 8 h9 Sez. B-B N PASSANTI, A A 9, 9, 76,5 The SU/.5-C (cylindrical shaft), is suitable for driving Gr..5 hydraulic pumps and motors, with belts, chain or other transmission, in which heavy combined loads take place (axial and radial). The pump/motor Gr..5, is directly flanged and connected by splined coupling (coupling to be ordered separately). On this version, there is a external grease nipple. 8,7,5 Minimum radial load (*) = 76 N n = n = 5 n = n = 5 n = (mm) Radial load (*) Axial load (*) Max. revolutions per minute 5 Life (*) 5 hours Max. working temperature 7 C Grease quantity 9 gr Type of grease DIN 588 NLGI classe (*) Nominal values calculated according to ISO 8. For more information, Ref. Code Description Q.ty 9 Cover Q585 O-Ring OR x5. 8 Shaft seal 55x7x Q7555 Snap ring E55 5 Bearing 55xx. 6 Q776 Woodruff A8x7x Tapered shaft 8 5 Shaft seal x55x8 9 Q659 Screw TEE M8x Q578 Aluminium washer 8.5xx.5 9 Grease nipple M8 99 Body SU/,5- C SU/,5 = Belt pulley support C = Cylindrical shaft SU.5-C/IE//.

13 SU/,5-D (cod. ) SUPPORT WITH TAPERED SHAFT FOR PUMP GR..5 The SU/.5-C, is suitable for driving Gr..5 hydraulic pumps and motors, with belts, chain or other transmission, in which heavy combined loads take place (axial and radial). The pump/motor Gr..5, is directly flanged and connected by splined coupling (coupling to be ordered separately). On this version, there is a external grease nipple n = n = 5 n = n = 5 n = (mm) Minimum radial load (*) = 76 N Radial load (*) Axial load (*) Max. revolutions per minute 5 Life (*) 5 hours Max. working temperature 7 C Grease quantity 9 gr Type of grease DIN 588 NLGI classe (*) Nominal values calculated according to ISO 8. For more information, Rif. Codice Descrizione Q.tà 9 Cover Q585 O-Ring 89.69x5. 8 Shaft seal 55x7x Rif. Codice Descrizione Q.tà Q7555 Snap ring E55 5 Bearing 55xx. 6 Woodruff.8xx Tapered shaft 8 5 Shaft seal x55x8 9 Q659 Screw TEE M8x Q578 Aluminium washer 8.5xx.5 9 Grease nipple M8 99 Body 5 Washer Q65 Nut M6x.5 SU/,5- D SU/,5 = Belt pulley support D = Tapered shaft SU.5-D/IE//.

14 SU/Universale (cod. 6) UNIVERSALE SUPPORT, CYLINDRICAL SHAFT 9 B B 6 SEZ. B-B M8N fori-holes SEZ. C-C M N 6 fori-holes 6 The SU/Universal is suitable for driving a variety of pumps, motors, with belts, chain or other transmission, in which heavy combined loads take place. Flanges and couplings are required to connect the hydraulic pump or motor C 68 C Z 8x DIN 58 6,5 M6 h6 85 h7 R8 7 SEZ. D-D MN 6fori-holes A D D , 7,8 58, A 5 85,5 SEZ. A-A n = n = 5 n = n = 5 n = 6 8 (mm) Minimum radial load (*) = 5 N Radial load (*) Axial load (*) Max. revolutions per minute 5 Life (*) 5 hours Max. working temperature 7 C Grease quantity gr Type of grease DIN 588 NLGI classe (*) Nominal values calculated according to ISO 8. For more information, Ref. Code Description Q.ty 9 Cover 9 Join 6 Shaft seal 6x75x8 59 Bearing 6 6x95x 5 7 Shaft 6 Q77 Woodruff Ax8x6 7 6 Bearing 6xx6.5 8 Q578 Aluminium washer 8.5xx.5 9 Q659 Screw TEE M8x 9 Grease nipple M8 99 Body Q6755 Screw TCEI Mx 6 nge kit - sect.. SU/UNIVERSALE = Belt pulley support SU/UNIVERSALE Flanges sect.. A SAE A F GR..5 B SAE B G GR. C SAE C L ISO D GR. M ISO E GR. P ISO SU-UNIVERSALE/IE//.

15 SU/ZF-C (cod. 5) SUPPORT WITH CYLINDRICAL SHAFT FOR PUMP GR. BOSCH Z5 The SU/ZF-C is suitable for driving Gr. Bosch pumps and motors with belts, chain or other transmission, in which heavy combined loads take place (axial and radial). The pump/motor Gr. Bosch, is directly flanged and connected by splined coupling (coupling to be ordered separately) n = n = 5 n = n = 5 n = (mm) Minimum radial load (*) = 77 N Radial load (*) Axial load (*) Max. revolutions per minute 5 Life (*) 5 hours Max. working temperature 7 C Grease quantity 7 gr Type of grease DIN 588 NLGI classe (*) Nominal values calculated according to ISO 8. For more information, Ref. Code Description Q.ty Q586 O-Ring 8x Q5856 O-Ring 8.7x Cover Q75 Snap ring 5 5 Bearing 8 x8x. 6 8 Cylindrical shaft 7 Q77 Woodruff A6x6x 8 8 Shaft seal xx Body SU/ZF- C SU/ZF = Belt pulley support C = Cylindrical shaft SUZF-C/IE//.

16 SU/ZF-D (cod. 5) SUPPORT WITH TAPERED SHAFT FOR PUMP GR. BOSCH Z7 The SU/ZF-D is suitable for driving Gr. Bosch pumps and motors with belts, chain or other transmission, in which heavy combined loads take place (axial and radial). The pump/motor Gr. Bosch, is directly flanged and connected by splined coupling (coupling to be ordered separately) n = n = 5 n = n = 5 n = (mm) Minimum radial load (*) = 77 N Radial load (*) Axial load (*) Max. revolutions per minute 5 Life (*) 5 hours Max. working temperature 7 C Grease quantity 7 gr Type of grease DIN 588 NLGI classe (*) Nominal values calculated according to ISO 8. For more information, Ref. Code Description Q.ty Q586 O-Ring 8x Q5856 O-Ring 8.7x Cover Q75 Snap ring D. 5 5 Bearing 8 x8x. 6 5 Tapered shaft 7 Q757 Woodruff x6,5 8 8 Shaft seal xx Body 5 Washer Q65 Nut Mx,5 SU/ZF- D SU/ZF = Belt pulley support D = Tapered shaft SUZF-D/IE//.

17 SU/5-8-P (cod. 7) SUPPORT WITH TAPERED SHAFT FOR FRONT FLANGE GR. BOSCH The SU/5-8-P is suitable for driving non-standard Gr. pumps and motors with belts, chain or other transmission, in which heavy combined loads take place (axial and radial). The pump/motor Gr., is directly flanged and connected by tang shaft for Oldam coupling (coupling not supplied) n = n = 5 n = n = 5 n = (mm) Minimum radial load (*) = 9 N Radia load (*) Axial load (*) Max. revolutions per minute Life (*) 5 hours Max. working temperature 7 C Lubrication Oil from the hydraulic drain pump Type of grease DIN 588 NLGI classe (*) Nominal values calculated according to ISO 8. For more information, Ref. Code Descriprion Q.ty Q75 Snap ring D. Bearing x5x. Shaft Q757 Woodruff x Shaft seal 5xx6/6.5 6 Q68 Washer 5xx 7 Q65 Nut Mx Body SU/5-8- P SU/5-8 = Belt pulley support P = Tapered shaft SU5-8-P/IE//.5

18 SU/5-8-R (cod. 7) SUPPORT WITH TAPERED SHAFT FOR FRONT FLANGE GR. BOSCH The SU/5-8-R is suitable for driving non-standard Gr. pumps and motors with belts, chain or other transmission, in which heavy combined loads take place (axial and radial). The pump/motor Gr., is directly flanged and connected. Minimum radial load (*) = 9 N n = n = 5 n = n = 5 n = (mm) Radial load (*) Axial load (*) Max. revolutions per minute Life (*) 5 hours Max. working temperature 7 C Lubrication Oil from the hydraulic drain pump Type of grease DIN 588 NLGI classe (*) Nominal values calculated according to ISO 8. For more information, Ref. Code Descriprion Q.ty Q765 Seeger D.5 Q755 Seeger D.5 Bearing 5x5x.6 5 Shaft 5 Q757 Woodruff x Shaft seal 5xx6/6.5 7 Q68 Washer 5xx 8 Q65 Nut Mx Body SU/5-8- R SU/5-8 = Belt pulley support R = Tapered shaft SU5-8R/IE//.6

19 SU/SAEA-R (cod. 75) SUPPORT WITH TAPERED SHAFT FOR FRONT FLANGE SAE A The SU/SAEA-R is suitable for driving non-standard Gr. pumps and motors with belts, chain or other transmission, in which heavy combined loads take place (axial and radial). The pump/motor Gr., is directly flanged and connected Minimum radial load (*) = N n = n = 5 n = n = 5 n = (mm) Radial load (*) Axial load (*) Max. revolutions per minute Life (*) 5 hours Max. working temperature 7 C Lubrication Oil from the hydraulic drain pump Type of grease DIN 588 NLGI classe (*) Nominal values calculated according to ISO 8. For more information, 5 Ref. Code Descriprion Q.ty Q755 Snap ring D.5 Bearing 5 5x5x.6 59 Shaft Gr. 76 Shaft seal 5xx Body SU/SAEA- R SU/SAEA = Belt pulley support R = Tapered shaft SUSAEA-R/IE//.7

20 SU/-86-F (cod. 76) SUPPORT WITH TAPERED SHAFT FOR FRONT FLANGE GR. The SU/-86-F is suitable for driving non-standard Gr. pumps and motors with belts, chain or other transmission, in which heavy combined loads take place (axial and radial). The pump/motor Gr., is directly flanged and connected n = n = 5 n = n = 5 n = (mm) Minimum radial load (*) = N Radial load (*) Axial load (*) Max. revolutions per minute Life (*) 5 hours Max. working temperature 7 C Lubrication Oil from the hydraulic drain pump Type of grease DIN 588 NLGI classe (*) Nominal values calculated according to ISO 8. For more information, Ref. Code Descriprion Q.ty Q755 Snap ring D.5 Q765 Snap ring D.5 Bearing 5 5x5x.6 8 Shaft Gr. 5 Woodruff.x Shaft seal 8xx7/ Body SU/-86- F SU/-86 = Belt pulley support F = Tapered shaft SU-86-F/IE//.8

21 SU/-86-E (cod. 7) SUPPORT WITH TAPERED SHAFT FOR FRONT FLANGE GR.T The SU/-86-E is suitable for driving non-standard Gr. pumps and motors with belts, chain or other transmission, in which heavy combined loads take place (axial and radial). The pump/motor Gr. T, is directly flanged and connected n = n = 5 n = n = 5 n = (mm) Minimum radial load (*) = N Radial load (*) Axial load (*) Max. revolutions per minute Life (*) 5 hours Max. working temperature 7 C Lubrication Oil from the hydraulic drain pump Type of grease DIN 588 NLGI classe (*) Nominal values calculated according to ISO 8. For more information, Ref. Code Descriprion Q.ty Q765 Snap ring D.5 Q755 Snap ring D.5 Bearing 5x5x.6 Shaft 5 Q757 Woodruff x Shaft seal 8xx7/ Body SU/-86- E SU/-86 = Belt pulley support E = Tapered shaft SU-86-E/IE//.9

22 SU/-86-H (cod. 77) REINFORCED SUPPORT, TAPERED SHAFT FOR FRONT FLANGE GR. The SU/-86-H is suitable for driving non-standard Gr. pumps and motors with belts, chain or other transmission, in which heavy combined loads take place (axial and radial). The pump/motor Gr., is directly flanged and connected. Minimum radial load (*) = 55 N n = n = 5 n = n = 5 n = (mm) Radial load (*) Axial load (*) Max. revolutions per minute Life (*) 5 hours Max. working temperature 7 C Lubrication Oil from the hydraulic drain pump Type of grease DIN 588 NLGI classe (*) Nominal values calculated according to ISO 8. For more information, 5 6 Ref. Code Descriprion Q.ty Q755 Seeger D.6 8 Bearing 5x5x5 5 Shaft Woodruff.x Shaft seal 8xx7/ Body SU/-86- H SU/-86 = Belt pulley support H = Tapered shaft SU-86-H/IE//.

23 IM5 (9 danm) MECHANICAL CLUTCH, CYLINDRICAL SHAFT FLANGE FOR PUMP GR.- DISENGAGED ENGAGED The mechanical clutches IM5 are fitted between motor (elecrical or engine) and hydraulic pump or motor, the pump or motor is engaged using a manual lever. Require flanges and coupling to connect pump and motor n = (mm) Radial load (**) Max. axial load (**) = dan max Max engagement speed (*) Max. torque 9 danm Life (**) 5 hours Working temperature - C +8 C Oil quantity. lt. Type of oil CLP 5-ISO VG5 Oil replacement months (*) The engagement and disegagement must be done when the pump is unloaded max speed. (**)Nominal values calculated according to ISO 8. For more information, IM5 - C * / IM5 = Mechanical clutch C = Cylindrical shaft Shaft Flanges Flanges sect.. / = Pump GR. - D = Clockwise S = Anticlockwise Rotation IM5/IE//.

24 IM5 (9 danm) IM5-.-S- 9 9 IM5-.-D- IM5-.-D- 8 IM5-.-S Q.ty Q.ty Ref. Code IM5-C-D-.. IM5-C-S-.. Description Ref. Code IM5-C-D-.. IM5-C-S-.. Description 98 Flange / 7 9 Spring 98 Flange gr.- (sect..) 8 Q8656 Ball D.8,5 9 Gasket 9 8 Shaft seal xx7 7 Screw TCEI M6x Q75 Snap ring E 5 56 Bearing 66 x55x9 5 Bearing 6 x6x,8 6 8 Inlet shaft Q7 Ring 7 8 Sleeve - right Q585 O-Ring 8.7x.78 9 Sleeve - left Q786 Needle x 8 55 Bearing 68 8xx7 5 9 Yoke 9 Q766 Snap ring I6 6 7 Pin Q77 Key A6x6x 7 9 Plate 7 Outlet shaft - right 8 Q656 Nut Mx Outlet shaft - left 9 Q67695 Washer,5xx 9 Plug G./ Q757 Key x6.5 9 Nylon washer x9x.5 Lever 9 Level plug G./ 9 Knob D.5 5 Q66 Plug with gasket G./8 LAB Label 6 98 Standard body IM5/IE//9.

25 IM (9 danm) MECHANICAL CLUTCH, CYLINDRICAL SHAFT FLANGE FOR PUMP GR.- / SAE A / SAE B DISENGAGED ENGAGED The mechanical clutches IM are fitted between motor (elecrical or engine) and hydraulic pump or motor, the pump or motor is engaged using a manual lever n = (mm) (*) Nominal values calculated according to ISO 8. For more information, Radial load (**) Max. axial load (**) max 7 Max engagement speed (*) Max. torque 9 danm Moment of inertia.5 kgm² Life (**) 5 hours Working temperature - C +8 C Oil quantity.5 lt. Type of oil CLP 5-ISO VG5 Oil replacement months (*) The engagement and disegagement must be done when the pump is unloaded max speed. In the reversible type we suggest as maximum speed to operate the engagement. (**)Nominal values calculated according to ISO 8. For more information, IM - C * ** IM = Mechanical clutch C = Cylindrical shaft D = Clockwise S = Anticlockwise R = Revese Shaft Rotation Flanges Flanges sect.. / = Pump GR.. SA = Pump SAE A SB = Pump SAE B IM/IE//.

26 IM (9 danm) 9 9 IM-.-REV IM-.-REV IM-.-S-. IM-.-S-. 5 IM-.-D-. IM-.-D Q.ty Q.ty Ref. Code IM-C-D-.. IM-C-S-.. IM-C-REV-.. Description Ref. Code IM-C-D-.. IM-C-S-.. IM-C-REV-.. Description 9 Flange D.66/6,5 (only for gr.-) 6 9 Plug G./ Screw TCEI M6x 7 9 Nylon washer x9x.5 Flanges (sect..) 8 9 Spring 9 Gasket 9 Q8656 Ball D.8,5 5 Shaft seal 5x6x7 Lever 6 9 Knob D.5 95 Plug with O-Ring G./8 7 Bearing 69 5x75x6 9 Yoke 8 Inlet shaft Q757 Key x Sleeve - right 9 Level plug G./ 9 Sleeve - left 5 Q7 Ring D.9 59 Sleeve - reversible 6 Q585 O-Ring 8.7x Bearing 6 xx9 7 Q786 Needle x 56 Outlet shaft - right 8 Pin 55 Outlet shaft - left 9 Q656 Nut Mx 57 Outlet shaft - reversible Q67695 Washer,5xx Q775 Key A8x7x 9 Collet 58 Bearing 9 5x85x, LAB Label Q7685 Snap ring I85 Q755 Snap ring E Body IM/IE//9.

27 IM (6 danm) MECHANICAL CLUTCH, CYLINDRICAL SHAFT DISENGAGED ENGAGED The mechanical clutches IM are fitted between motor (elecrical or engine) and hydraulic pump or motor, the pump or motor is engaged using a manual lever n = (mm) Radial load (**) max 7 Max engagement speed (*) Max. torque 6 danm Moment of inertia.886 kgm² Life (**) 5 hours Working temperature - C +8 C Oil quantity. lt. Type of oil CLP 5-ISO VG5 Oil replacement months (*) The engagement and disegagement must be done when the pump is unloaded max speed. In the reversible type we suggest as maximum speed to operate the engagement. (**)Nominal values calculated according to ISO 8. For more information, IM - C * IM = Mechanical clutch C = Cylindrical shaft D = Clockwise S = Anticlockwise R = Revese Shaft Rotation Flanges sect.. A SAE A F GR..5 B SAE B G GR. C SAE C L ISO D GR. M ISO E GR. P ISO IM/IE//.5

28 IM (6 danm) Q.ty Q.ty Ref. Code IM-C-D IM-C-S IM-C-R Description Ref. Code IM-C-D IM-C-S IM-C-R Description Q Screw TCEI Mx 6 9 Body 9 Cover 7 9 Spring 9 Gasket 8 Q8656 Ball D.8,5 6 Shaft seal 6x75x8 9 9 Level plug G./ 5 59 Bearing 6 6x95x Lever 6 Inlet shaft Q6569 Nut Mx6 7 Sleeve - right 99 Plate Sleeve - left Q588 O-Ring.77x.6 9 Sleeve - reversible Q7 Ring D. 8 6 Bearing 6 7xx 5 Q786 Needle x 9 Outlet shaft - right 6 9 Yoke Outlet shaft - left 7 Q656 Nut Mx 89 Outlet shaft - reversible 8 Q67695 Washer,5xx Q77 Key Ax8x6 9 Q757 Key x6.5 6 Bearing 6xx6,5 5 Pin 9 Knob D.5 Q Washer Schnorr D. 9 Plug G./ LAB Label 9 Nylon washer x9x.5 96 Flange D.75xx Plug with O-Ring G./8 Flange kit (sect..) IM/IE//9.6

29 IM Universale (6 danm) MECHANICAL CLUTCH, DIN 58 Z SHAFT The mechanical clutches IM Universale are fitted between motor (elecrical or engine) and hydraulic pump or motor, the pump or motor is engaged using a manual lever n = (mm) Radial load (**) max 7 Max engagement speed (*) Max. torque 6 danm Moment of inertia.886 kgm² Life (**) 5 hours Working temperature - C +8 C Oil quantity. lt. Type of oil CLP 5-ISO VG5 Oil replacement months (*) The engagement and disegagement must be done when the pump is unloaded max speed (reversible type). (**)Nominal values calculated according to ISO 8. For more information, IMU - H R IMU = Mechanical clutch H = Shaft DIN 58 Z R = Revese Shaft Rotation Flanges sect.. A SAE A F GR..5 B SAE B G GR. C SAE C L ISO D GR. M ISO E GR. P ISO IMU/IE//.7

30 IM Universale (6 danm) Q.ty Q.ty Ref. Code IMU-H-R Description Ref. Code IMU-H-R Description Q Screw TCEI Mx 8 Q8656 Ball D.8,5 9 Cover 9 9 Level plug G./ 9 Gasket Lever 6 Shaft seal 6x75x8 Q6569 Nut Mx Bearing 6 6x95x 99 Plate 6 Inlet shaft Q588 O-Ring.77x Sleeve - reversible Q7 Ring D. 8 6 Bearing 6 7xx 5 Q786 Needle x 9 9 Outlet shaft Z. - reversible 6 9 Yoke 5 Shaft seal 6x85x 7 Q656 Nut Mx 6 Bearing 6xx6,5 8 Q67695 Washer,5xx 9 Knob D.5 9 Q757 Key x6.5 9 Plug G./ 5 Pin 9 Nylon washer x9x.5 Q68 6 Washer Schnorr S 5 95 Plug with O-Ring G./8 96 Flange D.75xx Body Flange kit (sect..) 7 9 Spring IMU/IE//9.8

31 IE ELECTROMAGNETIC CLUTCH - OIL LUBRICATION Ø 5. Ø 5. PK6 Ø 77.8 Pd (danm) IE V +% An electromagnetic clutch is a unit designed to convey movement to a UT hydraulic pump through an electrically controlled onloff pulley. An electromagnetic clutch is composed of: - an electromagnetic friction clutch (FE) - an aluminium support (SU) with a conical (AT) and splined (UT) shaft mounted on oilbath bearings. - coupling to be ordered separately 8 6 IE V +% IE V -% IE V -% Approximate calculation of drive torque P (danm) = c p P < Pd where: p = pump pressure in BAR c = pump displacement in cc/revolution from diagram: Pd = Max. torque allowed by the coupling in danm n = Motor rotation speed in rpm. IE - /V IE - /V N () * Input tension and operating temperature considerably influence the correct operation of the clutch. At temperatures above 7 C the dynamic torque rating is reduced by %. To reach the maximum torque, run the clutch in through repeated working cycles (ON/OFF). Description This type of clutch exploits the force of attraction of an electromagnetic field generated by a solenoid that, after being energised (L in ON position), connects a pulley to a driving shaft. The electromagnetic friction clutch is composed of two separate parts: - a solenoid L, mounted on the support; - a pulley PU, mounted on the conical shaft AT. Operations are as follows: - under non operating conditions with L in OFF position: the pulley, driven by the V belt, turns idle on its own hearing, - under operating conditions with L in ON position: the pulley, driven by the V belt, conveys movement to the shaft, then to the user UT. max 5. danm (pulley Ø5. - races) Static nominal torque (*). danm (pulley Ø races) (at /V ±,5%). danm (pulley Ø races) Power supply (*) Vdc - 5W Vdc - 6W Rotation (pulley side) CW Working temperature - C +5 C Max working temperature coil (*) C Oil quantity,7 lt. Type of oil Type: ISO 978: Viscosity: ISO VG 5 (ISO 8:99) Oil replacement After first 5hours then every months IE/IE//.

32 IE CODICE ORDERING DI ORDINAZIONE CODE IE ** ** ** * * IE = Electromagnetic clutch = dan = dan = Pump GR. / = Pump GR. - SA = Pump SAE A SB = Pump SAE B Torque Flanges sect.. Voltage Pulley Optional N = Clutch with wires A* = Ø 5, at races (only for IE) B = Ø 5, PK6, at 6 races (only for IE) C* = Ø 77,8 at races (only for IE) * Pulley with section SPA = V DC = V DC Q.ty Q.ty Ref. Code IE..A.. IE..B.. IE..C.. Description Ref. Code IE..A.. IE..B.. IE..C.. Description 9 Shaft Shaft seal 5x6x7 Flanges (sect..) 9 Washer nylon x9x.5 97 Body 986 Plug / 9 Flange D.66/5, (only for gr.) Q665 Plug TCEI G/ 9 Flange D.66/6,5 (only for gr.-) 5 67 Clutch D.5. x - danm - Vdc 5 9 Gasket 68 Clutch D.5. x - danm - Vdc Screw TCEI M6x 68 Clutch D.5. x 6 - danm - Vdc 7 Q768 Snap ring Clutch D.5. x 6 - danm - Vdc 8 Q757 Key x5 DIN Clutch D.77.8 x - dann - Vdc 9 Bearing 695x75x6 68 Clutch D.77.8 x - dann - Vdc Bearing 6 5x8x Wire L=65 IE/IE//.

33 IEG (grease) ELECTROMAGNETIC CLUTCH - GREASE LUBRICATION Ø 5. Ø 5. PK6 Pd (danm) 8 6 IEG V +% IEG V -% IEG V +% IEG V -% Approximate calculation of drive torque P (danm) = c p P < Pd where: p = pump pressure in BAR c = pump displacement in cc/revolution from diagram: Pd = Max. torque allowed by the coupling in danm n = Motor rotation speed in rpm. IEG - /V IEG - /V N () * Input tension and operating temperature considerably influence the correct operation of the clutch. At temperatures above 7 C the dynamic torque rating is reduced by %. To reach the maximum torque, run the clutch in through repeated working cycles (ON/OFF). An electromagnetic clutch is a unit designed to convey movement to a UT hydraulic pump through an electrically controlled onloff pulley. An electromagnetic clutch is composed of: - an electromagnetic friction clutch (FE) - an aluminium support (SU) with a conical (AT) and splined (UT) shaft mounted on grease bearings. - coupling to be ordered separately Description This type of clutch exploits the force of attraction of an electromagnetic field generated by a solenoid that, after being energised (L in ON position), connects a pulley to a driving shaft. The electromagnetic friction clutch is composed of two separate parts: - a solenoid L, mounted on the support; - a pulley PU, mounted on the conical shaft AT. Operations are as follows: - under non operating conditions with L in OFF position: the pulley, driven by the V belt, turns idle on its own hearing, - under operating conditions with L in ON position: the pulley, driven by the V belt, conveys movement to the shaft, then to the user UT. max Static nominal torque (*) (at /V ±,5%) 5. danm (pulley Ø5. - races). danm (pulley Ø races). danm (pulley Ø races) Power supply (*) Vdc - 5W Vdc - 6W Rotation (pulley side) CW Working temperature - C +5 C Max working temperature coil (*) C Grease quantity gr Type of grease DIN 55 = MPF - K- IEG/IE//9.

34 IEG (grease) IEG / ** * * IEG = Electromagnetic clutch = dan Torque Pulley Optional N = Clutch with wires A* = Ø 5, at races (only for IEG) B = Ø 5, PK6, at 6 races (only for IEG) * Pulley with section SPA / = Pump GR. - Flanges sect.. Voltage = V DC = V DC Q.ty Q.ty Ref. Code IEG..A.. IEG..B.. Description Ref. Code IEG..A.. IEG..B.. Description Shaft Shaft seal 5x6x7 97 Flange Gr.- (sect.) Shaft seal 5x5x7 9 Body 9 Grease nipple 98 Flange / 5 Q578 Washer aluminium M8 8.5x5x Spacer 6 67 Clutch D.5. x - danm - Vdc 6 95 Gasket 68 Clutch D.5. x - danm - Vdc 7 7 Screw TCEI M6x 68 Clutch D.5. x 6 - danm - Vdc 8 Q659 Screw TEE M8x 685 Clutch D.5. x 6 - danm - Vdc 9 Q755 Snap ring E Wire L=65 Q757 Key x5 DIN 6888 Bearing 69 5x75x6 IEG/IE//9.

35 FLANGES SU/Universale - IM - IM/Universale A B C Spare parts flange and screw kit 5 Spare parts flange and screw kit 5 Spare parts flange and screw kit 555 D E F Spare parts flange and screw kit 58 Spare parts flange and screw kit 55 Spare parts flange and screw kit 56 G L M Spare parts flange and screw kit 56 Spare parts flange and screw kit 5 Spare parts flange and screw kit 5 P Pump type Z H Spare parts flange and screw kit 56 A SAE A 5 5 B SAE B 5 C SAE C 5 8 D GR. E GR. F GR G GR. 6 6 L ISO M ISO P ISO 57 7 FLANGES/IE//9.

36 FLANGES IM / IE GR. * GR. - / * Only for IE Spare part flange code 9 Spare part flange code 95 SAE/A S/A SAE/B S/B Spare part flange code 96 Spare part flange code 98 FLANGES IEG FLANGES IM5 GR. - / GR. - / Spare part flange code 97 Spare part flange code 98 FLANGES/IE//9.

37

38 Code DOC - Rev. Brevini Fluid Power S.p.A. Via Moscova, 6 Reggio Emilia - Italy Tel x uidpower.com info@brevinifl uidpower.com