Quazite Catalog Numbering System for Boxes and Covers
|
|
- Nora Davidson
- 5 years ago
- Views:
Transcription
1 Quazite Catalog Numbering System for Boxes and s Polymer Concrete 1 Weight 2 3,4,5,6 7 - s 8 - s 9 Variation 10 Variation L (LW PC) A (Special s) 0608 C (Standard) A (Standard) 0 (Standard ) 0 (Standard ) P (PC) C (Box Straight Sides w/ 3/4 cover) D (Flared Box w/1 Taper w/2 or 3 cover) G (Box Straight Sides 1 1/2, 1 11/16, 2, or 3 cover) 0818 **H (H.D. 22,500# C (Overlapping) A (Aluminum) 1 (Opens Over 90 ) Test) 09 S (Steel ) G (Gasketed) B (Captive Bolt) 2 (Opens Under 90 ) 0915 W (Non-Bolt down ) ***H (33,750# Test) D (Deep C Bores for Locking Cylinders) M (Metal Locator) R (Round Enclosure) 1015 J (Grade Adjustable G (Galvanized) R (Rockwell Touch Reader) Frame) T (Flared Box w/2 or 1016 S (Split ) K (6 x9 Polymer Drop in Lid) 3 cover) X (Replacement 1118 T (Torsion ) L (7 x13 1/2 Polymer Drop in Lid) Markers or PX box 3/4 ) 1212 P (CI 6 x 9 Meter Lid) G (Gas) 1324 Q (CI 9 x 12 Meter Lid) P (Power) 1730 R (CI 4 1/2 x 7 1/2 Meter Lid) S (Sanitary) 2042 S (Thru Slot 1/2" x 1") T (Telephone) 2424 T (1 x 4 Pull Slot) W (Water) 2436 V (CI 4 7/8 x 4 7/8 Vented Meter Lid) Boxes - Boxes Box Depth Box Depth 3048 B (Box Open Base) A (Tier 22) D (Solid Base) B (Std. Mouseholes) E (Extension) C (Divided) J (Footed Box) G (Gasketed) R (Extension w/ L (Tier 8) Solid Base) Z (Assembly) * * Designates a special color - R=Red, G=Green, etc. ** This load is tested over a 10 x10 area *** This load is tested over a 10 x20 area Page 106 November 2011 L = Lightweight P = Standard
2 11, 12 Logo Field 13 / Logo Field 09 = Blank 1-9 (for 3 Digit Logos) 17 = Electric 29 = Lighting A (Cast Part for 2 Digit Logos) A (See Reference Chart 84 = Power B (3/8 Hex Bolts) B (3/8 Hex Bolts) Other logos are available. C (1/2 Coil Lg. Penta Head) H (3/8 Lag Bolt) J (1/2 Hex Bolts) K (1/2 Lag Bolts) P (Penta Head) R (3/8 Sm. Penta Head) S (1/2 Lg. Penta Head) T (3/8 Lg. Penta Head) C (1/2 Coil Lg. Penta head) H (3/8 Lag Bolt) J (1/2 Hex Bolts) K (1/2 Lag Bolt) P (Penta Head) R (3/8 Sm. Penta Head) S (1/2 Lg. Penta Head) T (3/8 Lg. Penta Head) Penta Head Bolt Reference Chart 13 Part No. Length Thread Application OR P /8-16 UNC PC0608, PC0818, PC1012, PC1118, PC1212, PC1324 PC1730 P /8-16 UNC PR2700, PR3900 P /8-16 UNC PG1015, PG1118 P /8-16 UNC PG2424, PT1324, PT1730 P /8-16 UNC PG1324, PG1730 P /8-16 UNC PG2436, PG3048, PG3636 P /2-13 UNC PG3660 P /2-13 UNC PR2200 P /2-13 UNC LE1324, LE1730 P /2-13 UNC PG3660 (Overlapping) P /2-13 UNC PG3060, PG3672, PG4848, PG4872, PG4896 P /2-13 UNC PG3060 (Overlapping) H (Box with 3/8 Lag Nut) K (Box with 1/2 coil/ Lag Nut) (See Reference Chart (See Reference Chart Sample Part Number P G H C A 1 H H A P Weight s s Logo Field / Logo Field Variation Variation Page 107 November 2011
3 FRP & Corrugated Catalog Numbering System for Boxes & s 1 2 Bolt/Insert Assembly/ 3 4,5, 6,7 8, 9 Depth/ Thickness s A (Assembly) 0 (Non Bolting) 0 (Flared Wall Box/ - Tier 8) A (Standard) B (Box) C () E (Extension) Sub-component Shell S (Shell) Panel 1 (1/2-13 UNC Penta Head Bolts) 2 (1/2-13 UNC Hex Head Bolts) 3 (3/8-16 UNC Hex Head Bolts & Washers) 4 (3/8-16 UNC Penta Head Bolts & Washers) 5 (1/2-6 Coil Thread Penta Head Bolt) 6 (1/2-6 Lag Thread Hex Head Bolt) 2 (Flared Wall Box/ - Tier 15) G (Gasket) 3 (Straight Wall Box - Tier 8) J (Power Marker) 10 Modification - 4 (Straight Wall Box - Tier 15) 1121 Boxes/ K (Torsion ) Extensions 6 (Straight Wall Box/ - Tier 22) S (Split (24x36 and smaller)) 7 (/Assembly - Pedestrian Y (1-Piece Panel (30x48 and larger)) Traffic) 8 (/Assembly - Tier 5) Z (2-piece Panel (30x48 and larger)) P (Panel) X (Cast part) 9 (Flared Wall Box - Tier 22) 22 Separate Base Box A (Corrugated Wall Box/Square Corner - Tier 8) Modification - Box X (Separate Base) 0 (Non Bolting) B (Corrugated Wall Box/Square A (Standard) Corner - Tier 15) 1 (1/2-13 UNC Insert) C (Corrugated Wall Box/Square B (Integral Bottom) Corner - Tier 22) 3 (3/8-16 UNC Insert) D (Corrugated Wall Assembly/ D (Divided) Square Corner - Pedestrian Traffic) 5 (1/2-6 Coil Thread Insert) E (Corrugated Wall Assembly/ G (Gasket) Square Corner - Tier 5) Shell Separate Base H (QAV III) H (Shell) Special L (Oversized Shell) Panel , 0 M (Standard Mouseholes) M (Box Corrugated Panel) 3636 P (Intercept Panel) N ( Corrugated Panel) 3660 T (Top Extension) Q (QAV Corrugated Panel) 3672 W (Grade Adjustable) Separate Base Note: rating can not exceed box rating. Page 108 November 2011
4 11, 12, 13 Logo 09 = Blank A (Orange) 17 = Electric G (Green) 29 = Lighting P (Purple) 84 = Power R (Red) Other logos are available A (Orange) G (Green) P (Purple) R (Red) Color - Box T (Government Tan) U (Blue) Color T (Government Tan) U (Blue) Bolt Reference Chart 2 Thread Head Length Application Part No. 1 1/2-13 UNC Penta 3.00" 1015, 1118, 1212, C ,, 1622, 1730, 1 1/2-13 UNC Penta 4.50" 2436 & Larger C /2-13 UNC Hex 2.50" 1015, 1118, 1212, C /2-13 UNC Hex 3.00" 1324, 1622, 1730, C /2-13 UNC Hex 4.00" 2436 & Larger C /8-16 UNC Hex 2.50" 1015, 1118, 1212, C /8-16 UNC Hex 3.00" 1324, 1622, 1730, C /8-16 UNC Hex 4.00" 2436 & Larger C /8-16 UNC Penta 2.50" 1015, 1118, 1212, - 4 3/8-16 UNC Penta 3.00" 1324, 1622, 1730, C /8-16 UNC Penta 4.00" 2436 & Larger - Sample Part Number Note: 500#'s do not receive a color code Note: 500# s do not receive a color code A A Bolt/ Insert Assembly/ Depth/ Thickness s Logo/ Color Modification Page 109 November 2011
5 Hubbell Enclosures 3621 Industrial Park Drive Lenoir City, Tennessee Phone: or Fax: NOTE: Because Hubbell has a policy of continuous product improvement, we reserve the right to change design and specifications without notice. Copyright 2011 Hubbell Incorporated NEVER COMPROMISE Page 110 November November M A&J 11/11 Catalog # HECI-Q
ANSI Tier Selection and Placement in Non-Deliberate Vehicular Traffic Applications
ANSI Tier Selection and Placement in Non-Deliberate Vehicular Traffic Applications SELECTION MAP Working Together to Increase Safety & Reliability The ANSI standard defines loading requirements for enclosures
More informationUNDERGROUND ENCLOSURES AND PADS
UNDERGROUND ENCLOSURES AND PADS Underground Enclosure Performance Specifications Enclosures, boxes and covers are required to conform to all test provisions of the most current ANSI/SCTE 77 Specification
More informationElectric Utility Applications. The Right Enclosure The Right Location The Right Application
Electric Utility Applications The Right Enclosure The Right Location The Right Application HDPE plastic enclosures are easy to install and provide strong, durable, chemical, and water resistant performance.
More informationUPDATED HDPE PLASTIC COVERS - DROP-IN & T-TOP OPTIONS DT1118PLHDI*** DT1118PLIDI*** DT1212PLHDI*** DT1212PLIDI***
PENCELL HDPE COVERS UPDATED HDPE PLASTIC COVERS - DROP-IN & T-TOP OPTIONS Based on customer feedback, Hubbell has improved the plastic (HDPE) covers on the popular PenCell DT series. The t-top cover, shown
More informationGrade Level Boxes (GLB ) for Underground Utilities and Buried Plant Applications ORDERING GUIDE
Grade Level Boxes (GLB ) for Underground Utilities and Buried Plant Applications ORDERING GUIDE Table of Contents Description Page Greenbelt Applications GLB610..........................................
More informationDURALITE. Surprisingly Light. Exceptionally Strong. DURALITE Surprisingly Light. Exceptionally Strong.
DURALITE Surprisingly Light. Exceptionally Strong. DURALITE Surprisingly Light. Exceptionally Strong. DURALITE Surprisingly Light. Exceptionally Strong. The performance you need the ease of installation
More informationMUNICIPAL WATER PRODUCTS OVERVIEW
MUNICIPAL WATER PRODUCTS OVERVIEW Oldcastle Enclosure Solutions understands what makes your projects successful the right Enclosure, for the right location, for the right application. We are dedicated
More informationSeries A Plastic Enclosures
Series A Plastic Enclosures Features & Benefits A Series Water Meter Boxes Features Benefits A Boxes are constructed using Engineered Plastics designed for specific use as water 1. All plastic construction
More informationForm No CE Parts List for:
Form No. 1000048CE Parts List for: PE55TWP-E110 PE55TWP-E220 MODEL B ELECTRIC HYDRAULIC PUMP Maximum Capacity: 10,000 PSI 8 9 TORQUE SPOOL 110-120 IN. LBS. TORQUE NUT 15-20 IN. LBS. 5 3,4 1,2 VALVE DETAIL
More information10,000 Series. Highlights C-6
Highlights Features higher flows Benefits demanding mobile and industrial applications from Applications Description This is the biggest disc valve motor of our line with up to 45 GPM and 24,000 in-lb
More informationMK IV OVERHEAD DOOR REPLACEMENT PARTS BOOK
MK IV OVERHEAD DOOR REPLACEMENT PARTS BOOK JAMISON DOOR COMPANY P.O. BOX 70 HAGERSTOWN, MARYLAND 21740 1-800-532-3667 301-733-3100 INTERNET: http://www.jamisondoor.com E-MAIL: contact@jamisondoor.com ECN
More informationParts & Installation. Slider Series Featuring The Hutch P 3 Pneumatic Pin Puller
The World s Leading Manufacturer Of Trailer Sliders For Over Three Decades. Slider Series Featuring The Hutch P 3 Pneumatic Pin Puller Parts & Installation Advancing the Practical Application of Suspension
More informationClass 300, Welding Neck, Slip-On and Threaded B16.47, Ser. A. ASME B16.5 Flanges
Class 300,, Slip-On and Threaded B16.47, Ser. A ASME B16.5 Flanges Weld, Slip-On, Socket Weld, Threaded, Lap Joint, Blind. 1/2" - 24" Class 150, 300, 400, 600, 900, 1500 and 2500 NOTE: Reducing flanges
More information1310 Inlets. 1 of 36. Jun Illustrated Parts Breakdown Agilent 6890 Gas Chromatograph Service Manual
30 Inlets This section contains illustrated parts breakdowns for 6890 GC inlets and related components. Split/Splitless Inlet Split/Splitless Inlet Column Liners Split/Splitless Inlet EPC Pneumatic Module
More informationCOMBINATION COVER & CARPET FLANGE
COMBINATION COVER & CARPET FLANGE Including Floor Box Products, Hubbell Incorporated is a registered ISO 9002 Company. Combination Cover & Carpet Flange Hubbell Floor Boxes SF3925 SF2925 SF2725 SF2525
More informationLycoming AIRCRAFT ENGINES. IO-540-AC1A5 Wide Series Flange Crankcase Model Engine PARTS CATALOG PC
AIRCRAFT ENGINES IO-540-ACA5 Wide Series Flange Crankcase Model Engine PARTS CATALOG PC-5- November 008 Lycoming 5 Oliver Street Williamsport, PA 770 U.S.A. 570/33-8 IO-540-ACA5 PARTS CATALOG This illustrated
More informationW Series Cast Junction Box Options Boxes Available for Raintight, Watertight, or Submersible Applications
W Series Cast Junction Box Options Boxes Available for Raintight, Watertight, or Submersible Applications This table shows the optional items available on the different types of enclosures shown in this
More informationMunicipal Water Market Products
Municipal Water Market Products Oldcastle Enclosure Solutions delivers lasting performance in the field, protecting, concealing, and accessing critical infrastructure to keep your community running strong.
More informationRP-1350 Rev. 1. Parts List. Model 441-S Regulator. Parts List. Copyright 1999 Invensys Energy Metering
RP-1350 Rev. 1 Model 441-S Regulator Parts List Model 441-S Regulator Parts List Copyright 1999 Invensys Energy Metering DIAPHRAGM SIZE Nominal Inside Diameter A 7" Diaphragm 9 3 /4" 10" Diaphragm 13 1
More informationSECTION 9: PARTS. Headstock
SECTION 9: PARTS We do our best to stock replacement parts when possible, but we cannot guarantee that all parts shown are available for purchase. Call (800) 523-4777 or visit www.grizzly.com/parts to
More informationModel-1 Natural Gas Valves
Flanged End 285 Screwed Weld End Locking Devices KEROTEST Model-1 s Short Weld End Long Weld End Weld x Flange 500 / 740 Flanged End 500 / 740 Weld x Flange 285 Model-1 Short Weld End Standard Welding
More informationTrailer Suspension Series Configurations & Parts Identification
9700 Trailer Suspension Series Configurations & Parts Identification Advancing the Practical Application of Suspension Technology Springfield, MO n (800) 654-8824 n (417) 862-5012 Fax (417) 862-2317 n
More informationHolley Ford 351W Hi-Ram Modular Intake Manifold Kits
Holley Ford 351W Hi-Ram Modular Intake Manifold Kits Holley P/N Engine Application & Induction Configuration 300-241 Hi-Ram, 1 x 95mm LS Throttle Body (longitudinal mount) w/ port EFI provisions & fuel
More informationSeries C Polymer Enclosures
Features & Benefits C Series Water Meter Boxes Designed to replace existing concrete boxes of similar dimensions, but offers more working room inside the box for repair and maintenance of the meter. Engineered
More informationASSY, CALIPER - LOADED AK150. Page 50 GEM Parts Catalog Section 5 - Brakes January 2009
4 5 6 2 0 9 3 7 8 ASSY, CALIPER - LOADED AK50 * PISTON, BRAKE CALIPER 2 *2 CALIPER, MACHINED INNER *3 CALIPER, MACHINED OUTER *4 PIN, COTTER - /6 X.0 LG ZINC PLATED 5 0522-00402 SCREW, SOCKET CAP HEAD
More informationMDS Dead-front Padmount Switchgear Style Guide 1VAM SG May 2010 Revision D
MDS Dead-front Padmount Switchgear Style Guide 1VAM224804-SG May 2010 Revision D The MDS style guide aids in the proper selection of your style number. When ordering the MDS, the style number must be given
More informationSUBMERSIBLE PUMPS. FOR 6 through 8 WELLS. 50 to 250 GPM for 6 Wells 325 GPM for 7 Wells 400 GPM for 8 Wells* 6T and 8T. Series 6P, 6T and 8T
SUBMERSIBLE PUMPS FW85 47 Supersedes 25 FOR 6 through 8 WELLS Series 6P, 6T and 8T High capacity 5, 6 or 7 submersible pumps for commercial, industrial, agricultural, municipal and other deep well, large
More informationConfigurations & Parts Identification
900 TWS Trailer Suspension Series Configurations & Parts Identification Hutchens Industries Advancing the Practical Application of Suspension Technology Springfield, MO n (00) 654-24 n (41) 62-5012 Fax
More informationEVERCONNECT TM. Table of Contents. No-Hub Pipe. Flexible. 7 Couplings. Pipe Caps. Heavy Weight. Test Plugs. Couplings. Shielded Transition
Table of Contents No-Hub Pipe Couplings Heavy Weight Couplings Shielded Transition Couplings 3 4 4 Flexible Pipe Caps Test Plugs Drain/Trap & Tubular Connectors 7 7 8 EVERCONNECT TM Flexible & Reducing
More information50 to 250 GPM Submersible Pumps For Six-Inch Wells. 325 & 400 GPM Submersible Pumps For Eight-Inch Wells
FW5 39B Supersedes 39 5 to 25 GPM Submersible Pumps For Six-Inch Wells & GPM Submersible Pumps For Eight-Inch Wells Series 6P, 6T and 8T High capacity six or eight inch submersible pumps for commercial,
More informationSUB-FHP AC GEARMOTORS PARALLEL SHAFT GEARMOTORS
SUB-FHP AC GEARMOTORS PARALLEL SHAFT GEARMOTORS 12-100 In-Lbs Single phase gearmotors, totally enclosed for continuous duty, general purpose applications. Permanent TEFC split capacitor designs are rated
More informationMini-Split Wall Brackets
INTRODUCING TM Condensing Modular Base H-Frame Air Handler Stand Polymer Risers Roof Stand Rubber rooftop support Mini-Split Wall Brackets QUALITY CONTROLLED GUARANTEED BY AN AMERICAN COMPANY AVAILABLE
More informationTugger T-Bolts Coupling (Extension) Nuts Eye Bolts Metric Coupling (Ext.) Nuts Latch Swing Bolts Heavy Hex Nuts...
INDEX Threaded Rod... 4 T-Slot Nuts... 14 Driver Studs - Stainless Steel... 4 Stainless Steel T-Nuts... 14 Driver Studs... 4-5 Stainless Steel Flange Nuts... 15 Driver Studs Various Thread Lengths... 6
More informationForm No Parts List for: MODEL B HYDRAULIC PUMP GENERAL SECTION PG PG553-2UK FT600 PG554. PG120A Series Y70G Series. Sheet No.
MODEL B HYDRAULIC PUMP GENERAL SECTION Parts List for: Form No. 100520 60208 PG553 65820 PG553-2UK FT600 PG554 FT700-001 PG554-LEAD FT700-002 PG554-2UK PG55A Series Y26G Series PG90A Series Y60G Series
More informationTypical uses of ACO CABLEMATE pits include providing the enclosure for floodlights to light up buildings. Type 95 and Type 96 with riser Type 8
O BLEMTE Polymer oncrete Electrical able Jointing and Drawing Pits The physical qualities of Polymer oncrete with its excellent dielectric properties, high mechanical strengths, chemical resistance and
More informationSubmersible Turbine Pumps
Submersible Turbine Pumps FW54 62 Supersedes NEW 5 to GPM For 5, 6, 7 and 8 inch wells High capacity submersible pumps for commercial, industrial, agricultural, municipal and other deep well, large water
More information800 Pin Receiver and ITA Modules and Contacts 2
TABLE OF CONTENTS 800 Pin Signal Module 800 Pin Receiver and ITA Modules and Contacts 2 Interface Devices (IDs) CASS Receiver 4 Light Weight CASS Receiver 5 80 Series Receiver 6 CASS Connector Module Configuration
More information4-11/16 Square Boxes. With Conduit Knockouts OB/SB-1. 4SJ-3/4 1-1/2 Deep, Welded. 4SJ-EK 1-1/2 Deep, Welded. 4SJD-3/4 2-1/8 Deep, Welded
4-11/16 Square Boxes With Conduit Knockouts 4SJ-3/4 1-1/2 Deep, Welded 4SJ-EK 1-1/2 Deep, Welded 4SJD-3/4 4SJD-EK 4SJD-3/4-1 4SJD-1 4SJD-1-1/4 Number Depth Cubic Inch Knockout Description Wt. Lbs. Std.
More informationFIGURE 9 - PARTS LIST: MK-3024K CONCRETE SAW - P/N
FIGURE 9 - : MK-3024K CONCRETE SAW - P/N 166449 20 FIGURE 9 - : MK-3024K CONCRETE SAW - P/N 166449 IDENTIFYING 1 SCREW, 3/8-16 X 1-1/4 HEX HEAD CAP 150774 2 2 GRIP, HANDLE, 1.0 ID 150842 2 3 WASHER, 3/8
More informationO-540-F1B5 SERIES PARTS CATALOG WIDE CYLINDER FLANGE CRANKCASE MODEL ENGINES
INTRODUCTION This illustrated parts catalog contains a complete parts listing for the Lycoming O-540-F1B5 series wide cylinder flange crankcase model aircraft engines. Major assembly and sub-assembly parts
More informationPHONE All prices effective JULY 1st, 2018 FAX A.C. PIPE SHELL CUTTERS PART # PRODUCT DESCRIPTION LIST LBS.
A.C. PIPE SHELL CUTTERS ACWL-100 1" shell cutter for AC (1/8" undersize) $ 159.44 0.5 ACWL-112 1-1/2" shell cutter for AC (1/8" undersize) $ 178.10 0.7 ACWL-200 2" shell cutter for AC (1/8" undersize)
More informationStraight Shaft String Trimmer
Form No. -72 Rev. A Straight Shaft String Trimmer Model No. 1972 20000001 & Up Parts Catalog Ordering Replacement Parts To order replacement parts, please supply: the part number, the quantity, and the
More informationMEH Series Sectionalizing Enclosures. Single-Phase and Three-Phase
MEH Series Sectionalizing Enclosures Single-Phase and Three-Phase ABB MEH Sectionalizing Enclosures ABB s MEH Sectionalizing Enclosures provide an economical and safe sectionalizing tap point for underground
More informationHEAVY DUTY PARTS MANUAL
HEAVY DUTY PARTS MANUAL REV. 1 RELEASED: 3/19/2013 Table of Contents 1. Complete Unit Pg. 3 2. Heavy Duty Moldboard Pg. 4 3. Heavy Duty Side Panel with Wear Shoe Pg. 5 4. Installation of Side Panel to
More informationQUICK REFERENCE Stock Sub-FHP Gearmotors
Parallel Shaft PZ Series QUICK REFERENCE Stock Sub-FHP P240 & P300 Series AC Single & Three Phase Single Phase 115V 12-100 In-Lbs Page 102 Single Phase 115/230V 43-391 In-Lbs Page 103 DC SCR & Low Voltage
More informationIt s time to get connected with
It s time to get connected with The essence of quality NEW See pag e6 PRATLEY products and P NUTS are distributed exclusively in the UK by: Cable Connectors Ltd Product Brochure Aluminium Alloy (Corrosion
More informationGearmotors Parallel Shaft - PZ Series - DC
90 & 180 - TENV - PZ Series Price Model Frame P X XL XH 4 40 1 40 M1115002.00 496 985.620 PZ5-30A 450 90 0.46 155 3.00 3.25 9.28 7.72 S, US 40 1 40 M1125046.00 496 985.623 PZ5-30A 450 180 0.19 155 3.00
More informationA GUIDE TO PIPE SIZES
A GUIDE TO PIPE SIZES Pipe Strengths To identify the dimensions and strengths of different pipe, it is common to use schedule terminology taken from the ANSI pipe schedule chart. The pipe schedule chart
More informationAccessories Models 54-61
Big Block Accessories Models 54-61 Vanguard Big Block Vertical 5437, 6137, 61E8, 61E9 Vanguard Big Block Horizontal 5434, 6134, 61E3, 61E4 TABLE OF CONTENTS The Model 54-61 (Vanguard Big Block ) Engine
More informationBore (B) Pitch Diam. Drilling Template Flanges (1) Diam of Diam of. Groove. Neck D X G A Raised Face Raised Face P Raised face
Class 300 Orifice s Pipe size Thickness of Depth of jack Jack screw s (1) screw slot size & of and raised face Hub Bevel threaded Length of of Stud stud bolts Face face face bolt circle Bolts Bolts Bolt
More informationWalk-In Tool Trailers 16-foot
Please complete the data fields on pages 3, 4 and 5. Save the form to your computer and email to: hpsliterature@hubbell.com and 20-foot tandem models Walk-In Tool Trailers 16-foot Standard and Optional
More informationMill - Thread Inserts and Kits
Mill - Thread s and Kits Mill-Thread tools for threading on CNC milling machines by using helical interpolation programs Advantages of Mill-Thread Tools Same toolholder and insert can produce both right-hand
More informationPrimary Sectionalizing Cabinets & Secondary Pedestals. Built to Protect and Endure.
Primary Sectionalizing Cabinets & Secondary Pedestals Built to Protect and Endure. Sectionalizing Cabinets & Secondary Pedestals Tough. Secure. Convenient. Hubbell s Sectionalizing Cabinets and Secondary
More informationFord Brass Saddles Style 101B and 202B
101B Ford Brass Saddles 101B and 202B 101B, 3/4" and 1" Taps 202B, 3/4" through 2" Taps Specifications Body - 85-5-5-5 brass alloy as per ASTM B62, ASTM B584 and AW WA C800. Threads may be FIP, AW WA,
More informationStraight Shaft String Trimmer
Form No. 5-507 Rev. A Straight Shaft String Trimmer Model No. 51970A 250000001 & Up Parts Catalog Ordering Replacement Parts To order replacement parts, please supply: the part number, the quantity, and
More informationUtility Carts. Tables/Carts. 18 x x x x x x 72 Must Ship via Truck
Tables/Carts Constructed of Stainless Steel 2 Dual Wheel Casters Without rails 34 high, With rails 36¾ high Assembly Required, Can be assembled for additional $50.00 18 x 24 TA-5001 With top shelf and
More informationSERIES 12 SUB-FHP RIGHT ANGLE DC GEARMOTORS
SERIES 12 SUB-FHP RIGHT ANGLE DC GEARMOTORS SERIES 12 SUB-FHP Electrical Specifications: Both SCR (90 volt) and Low Voltage (12 volt) right angle gearmotors. the 90 volt motors are performance matched
More informationP773-2 For Model: M773LW2 PARTS MANUAL. Marine Generators Marine Diesel Engines Land-Based Generators
P773-2 For Model: M773LW2 PARTS MANUAL Marine Generators Marine Diesel Engines Land-Based Generators CALIFORNIA Proposition 65 Warning: Diesel engine exhaust and some of its constituents are known to the
More informationTEXTRON Lycoming AIRCRAFT ENGINES
TEXTRON Lycoming AIRCRAFT ENGINES O-60-AP Wide Cylinder Flange Crankcase Model Engines PARTS CATALOG PC-06-6 MARCH 99 0-60-AP PARTS CATALOG This illustrated parts catalog contains a complete parts listing
More informationCat Description Finish. 1 Hole Plug Gray /4 Hole Plug White /4 Hole Plug Bronze /4 Hole Plug Gray 10 30
Lampholder & Bar Coded For 75 Thru 150 Watt PAR 38 Lamps Extra Long Wire Leads for Easy Hook-Up Locking Swivel Knuckle Assures Positive Lamp Positioning and Provides Pinpoint Directional Aiming Lampholder
More informationQuantum Rotary Control Monitors Weatherproof IEC
Weatherproof rotary control monitors with a choice of enclosure materials. Impervious to moisture, chemicals and solvents, they offer a variety of switching options and single or dual coil solenoid valves
More informationForm No Parts List for: RWP55 RWP55-4 MODEL C HYDRAULIC PUMP AIR DRIVEN WITH REMOTE CONTROL GENERAL ASS'Y SIDE VIEW SECTION A-A
Parts List for: Form No. 000339 RWP55 RWP55-4 MODEL C HYDRAULIC PUMP AIR DRIVEN WITH REMOTE CONTROL GENERAL ASS'Y SIDE VIEW 3 9, 0 4 5 6 6 5 4, 3 9,0 SPX Hydraulic Technologies, Rockford, IL 609 USA powerteam.com
More informationcable management Pit / Vault System Series
cable management Pit / Vault System Series brought to you by channell Dedicated to protecting fiber optics through design, innovation, and service. The Only One of its Kind in the World. Ductile Iron Lid
More informationLycoming Aircraft Engines Parts Catalog
Lycoming Aircraft Engines Parts Catalog 76 Series O-360, LO-360 Series Part No. PC-3 65 Oliver Street Williamsport, PA 770 Lycoming Aircraft Engines Parts Catalog 76 Series O-360, LO-360 Series Part No.
More informationCENTRIFUGAL UPBLAST ROOF EXHAUSTERS Model VQBL
CENTRIFUGAL UPBLAST ROOF EXHAUSTERS Model VQBL CENTRIFUGAL UPBLAST ROOF EXHAUSTERS HIGH TEMPERATURE SMOKE EXHAUST APPLICATIONS Belt Driven Model VQBL DESIGNED AND ENGINEERED TO MEET INDUSTRY NEEDS SECTION
More informationAnchor Tools. Catalog 4A December Phone: Web: hubbellpowersystems.com December 2014.
Anchor Tools Catalog 4A Page 4A-1 Page 4A-3 4A-4 4A-5 4A-6 4A-7 4A-8 4A-9 4A-10 4A-11 4A-12 4A-13 4A-14 4A-15 TABLE OF CONTENTS Subject How to match Chance PISA Anchors with Installing Wrenches PISA Drive
More informationPVC Stargrip series 4000 Mechanical Joint Wedge Action Restraint for Plastic Pressure Pipe
PVC Stargrip series 4000 Mechanical Joint Wedge Action Restraint for Plastic Pressure Pipe INFORMATION The PVC Stargrip Mechanical Joint Restraint System is an exceptional restraint system for mechanical
More informationRigid Metal Conduit, IMC or EMT K-Clamps
65178 Rigid Metal Conduit, IMC or EMT K-Clamps Wt. Lbs. Std. Catalog No. Size (In.) Per 100 Pkg. Right Angle Type Right Angle Type Hot Dip/Mechanically Galvanized* For Rigid, IMC, EMT PC-50RA 1/2 37.0
More informationQUICK REFERENCE Stock Sub-FHP Gearmotors
QUICK REFERENCE Stock Sub-FHP AC Single & Three Phase DC SCR & Low Voltage Parallel Shaft PZ Series Single Phase 115V 12-100 In-Lbs Page 166 DC SCR 90 & 180V 10-100 In-Lbs 36-100 In-Lbs torque Page 156
More information1.6 Accessories include tool-free snap-in technology options for air flow, cable management, shelves, power distribution units, etc.
Rittal TS IT Rack Guide Specifications TS IT network server enclosure 1.0 General Description 1.1 Modular Free Standing Equipment Cabinet 1.2 Various combinations of dimensions: 1.2.1 Height: 48 /1200mm,
More informationTERMINATION ENCLOSURE OPTIONS
TERMINATION ENCLOSURE OPTIONS Add suffix: R - Reverse Stagger the Bus Bars (to run cable in from the top) CU - Copper NEMA Mount Bus Bars C - Plastisol Covers for Bus Bars DF - Dead Fronts T - Tin Plated
More informationGuardmatic Masonry / Refractory Saw Gasoline Model Parts List
October 23, 2003 d Guardmatic Masonry / Refractory Saw Gasoline Model Parts List 542201008 Reference Information: Model No.: Serial No.: Date Purchased: NOTES: DECAL DESCRIPTIONS AND LOCATIONS DESCRIPCIÓN
More informationDisc Valve Hydraulic Motors Series 4000
Disc Valve Hydraulic Motors Series 0 10.20 inspired hydraulics. Änderungen und Druckfehler vorbehalten 10.20 EN EATON_Motoren english Highlights Features 10 displacements, a variety of mounting flanges
More informationTL210/TL310/ TL410 -WCS SERIES
TL210/TL310/ TL410 -WCS SERIES Wet Location While In Use 10-(260mm) Anaheim Convention Center, CA 10" 5" (127mm) (279mm) 2" (51mm) 11-1/2" (292mm) 3-1/2"dia(Hole) (89mm) 4"(102mm) 9-1/2" OC (241mm) The
More informationSMS Solid Stainless Cylinders
SMS Solid Stainless Cylinders Space Saving and Conventional Lengths Pneumatic to 200 PSI Hydraulic 400 to 500 PSI Non shock /8,, 2, 3 Bore 300 Series Stainless Exterior Assures Aesthetics and Function
More informationAluminum Box Culverts
Steel and Aluminum s The Solution for Small Bridge Replacement: s Contech s are a practical and costefficient solution for small bridge replacement. They have a lower installed cost because they are faster
More informationTouch plate serial number. Please save this info here for use later:
Touch Plate Manual Touch plate serial number. Please save this info here for use later: Copyright Next Wave Automation All Rights Reserved. Version 2 April14th 2017 Updates of this manual are available
More informationModel 6. Power Wheel. Planetary Gear Drive
Model 6 Power Wheel Planetary Gear Drive CONTENTS Introduction 3 Model 6 Wheel Drives - Single & Double Reduction 4-5 Model 6 Wheel Drives w/a2 Series Integral Parking Brake - Single & Double Reduction
More informationKuhnke Technical Data. Contact Details
Kuhnke Technical Data The following page(s) are extracted from multi-page Kuhnke product catalogues or CDROMs and any page number shown is relevant to the original document. The PDF sheets here may have
More informationHolley GM LS1/2/6, LS3, and LS7 Hi-Ram Modular Intake Manifold Kits
Holley GM LS1/2/6, LS3, and LS7 Hi-Ram Modular Intake Manifold Kits Holley P/N Engine Application & Induction Configuration 300-112 LS3 Hi-Ram, Carbureted, 2 x 4500 Dominator, 2 throttle bores (sideways
More informationParts Manual Contains:
Parts Manual Contains: M-0- REV. B JANUARY 009 Warranty Information Warnings Parts Ordering Information Exploded View Parts Breakdowns MAXON Lift Corp. 009 LIFT CORP. 9 Slauson Ave. Santa Fe Springs,
More informationCATALOG OF REPLACEMENT PARTS
CATALOG OF REPLACEMENT PARTS HPC PROOFER AND HRP RETARDER/PROOFER HPC100 ML-132156 HRP100 ML-132209 ML-132157 ML-132210 ML-132158 ML-132211 ML-132159 ML-132212 ML-132160 ML-132213 ML-132161 ML-132214 ML-132162
More informationUT Series. Pneumatic Actuators. UT-**-DA Series UT-**-SR Series. A full range of double acting and spring return actuators designed
UT-**-DA Series UT-**-SR Series A full range of double acting and spring return actuators designed to NAMUR for air supply ports and top mounting with ISO 5211 for base mounting patterns. Features Dual
More informationAluminum Conduit Bodies, Covers and Gaskets For Rigid Conduit & IMC.
NEC/CEC Suitable for use in the following Applications To provide access to conductors for pulling, splicing, maintenance and future changes/upgrades. Allows connection of straight conduit runs, branch
More informationQuick Term II. Cold Shrink Silicone Rubber Termination. Quick Term II. Instruction Sheet
Quick Term II Cold Shrink Silicone Rubber Termination Instruction Sheet IEEE Std. No. 48 1990 Class 1 Termination 15 kv Class 110 kv BIL Kit Contents: 1 Hi K Silicone Rubber Termination 2 Scotch 70 Silicone
More informationGRM SERIES GRM CLAMPS R JAW STYLE. Compact Jaw Profi le for Limited Space Applications Largest Total Clamp Force of All Series GRM2 Clamps GRMR01
GRM SERIES GRM CLAMPS R STYLE Compact Jaw Profi le for Limited Space Applications Largest Total Clamp Force of All Series GRM2 Clamps ORDERING DATA: SERIES GRM CLAMP STYLE R INDEX: Ordering Data Page 2
More informationSwitches. SERIES FEATURE ACTUATION MAX RATING SEAL RATING MOUNTING CIRCUITRY 115VAC, 28VDC)
SWITCH SELECTION GUIDE Toggle Switches SERIES FEATURE ACTUATION MAX RATING SEAL RATING MOUNTING CIRCUITRY (Resistive @ 115VAC, 28VDC) T1 2 or 3 Position, Momentary, 8A MIL-PRF-83731 15/32" or 1/4" dia.
More informationMagnesium Option, Late Model Front Seal, Viton, P/N 67256V Rear Seal, Viton, P/N 67257V Shifter Installed Heat Treated Yoke, P/N
DESCRIPTION OPTION Magnesium Option, Late Model 80100L Front Seal, Viton, P/N 67256V 80109 Rear Seal, Viton, P/N 67257V 80110L Shifter Installed 80112L Heat Treated Yoke, P/N 62946-6 80119-6 Heat Treated
More informationDisc Valve Hydraulic Motors 4000 Compact Series
Disc Valve Hydraulic Motors 10.2014 inspired hydraulics. Änderungen und Druckfehler vorbehalten 10.2014 EN EATON_Motoren english Port B Port A Features Shuttle Valve with Back- Pressure Relief Valve Highlights
More informationAustralia Edition SGLB ORDERING GUIDE. Developed for. NBNCo. C-Series SGLB Grade Level Box (Pits)
Australia Edition SGLB ORDERING GUIDE Developed for NBNCo C-Series SGLB Grade Level Box (Pits) NBNCo Grade Level Boxes (GLB/SGLB) Lead-In Storage Pit 6 Series GLB610 (C1)* Pit Specifications GLB610 Top
More informationUnique CORROSION RESISTANT PLASTIC SLIDE UNIT FEATURES. Major Benefits. Industry Uses
Unique CORROSION RESISTANT PLASTIC SLIDE Model# ML305733 PLASTIC SLIDE PET GRIPPERS UNIT FEATURES Bore Size: Stroke: Body: Tool Plate: Guide Shafts: Retaining Rings: Fasteners: 2X 32 mm DIA 2.000 +.080/-.000
More information35-kV Thru-Bushings F Series (bolt-in) for Air-Insulated to Air-Insulated Service 200 Amp, 600 Amp, 900 Amp and 1250 Amp
Page 1 2018 Equipment Connection Bus Bar, or Grounded Metal Equipment Plate F Series Mounting Holes ELRIM Cycloaliphatic Epoxy Provides: Nontracking, self-scouring, nonweathering performance Superior dielectric
More informationPARTS ORDERING INFORMATION
RP-268 REPAIR PARTS FOR VE268 Roll Grooving Tool PARTS ORDERING INFORMATION When ordering parts the following information is necessary for the Victaulic Tool Company to promptly process the order and send
More informationES-660 Series Spring-Loaded Hatch
Instruction Manual ES-660 Series March 2015 ES-660 Series Spring-Loaded Hatch Table of Contents Introduction...2 Specifications...2 Principle of Operation...2 Tagging Information...2 Installation...3 Maintenance...4
More informationEmerson Power Transmission P.O. Box 687 Maysville, KY Phone:
Torq/Gard Installation, Operation and Maintenance Instructions Emerson Power Transmission P.O. Box 687 Maysville, KY 41056 Phone: 606-564-2093 www.emerson-ept.com FORM 8322 Revised June 2007 Installation
More informationDEMA MODELS P203CTC.PI.1,.2,.3 INSTALLATION INSTRUCTIONS
I. PARTS: A. 1 pc. Cyclone Portable Injector B. 1 pc. Foot Strainer & 1/4" I.D. Tubing. C. 1 pc. Ceramic Weight. D. 1 pc. Instruction Sheet D. 2 pc. 3 hose w/ female x female GHT fittings on both ends
More informationExplosionproof enclosures XPCJ series Cast aluminum steel control/junction box
1 TECHNICAL DATA SHEET Explosionproof enclosures XPCJ series Cast aluminum steel control/junction box XPCJ series series of explosionproof aluminum enclosures are typically used in the packaging of electrical/electronic
More informationLB125A 1-1/4" LB Form 5 Aluminum Conduit Body. Dimensions and Weight STUD SIZE #10; 0.97 INCH LENGTH; INSULATION SUPPORT
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 LB125A 1-1/4" LB Form 5 Aluminum Conduit Body Appleton/Oz Gedney Catalog Number Manufacturer Description Weight per unit
More informationTHREADED & BAYONET CONNECTORS FOR DEMANDING ENVIRONMENTS
MILITARY AND COMMERCIAL AVIATION MIL - DTL - 83723 SERIES III THREADED & BAYONET CONNECTORS FOR DEMANDING ENVIRONMENTS CONNECTORS FOR DEMANDING ENVIRONMENTS THREADED AND BAYONET MILITARY AND COMMERCIAL
More informationModel: 8020HD 1120HD Low Profile Vertical Mixers
TMR Incorporated Features: Heavy Duty MEGA FRAME Heaviest Frames in the industry Heavy Duty axles,10 bolt hubs 5 year guarantee on Planetaries 3/8 Thick High Strength Steel Tub Standard Stainless Steel
More information