Homac. Underground Distribution. Pedestal Connectors and Covers. Aluminum Lay-In Pedestal Connectors
|
|
- Ethelbert Jennings
- 5 years ago
- Views:
Transcription
1 Aluminum Lay-In Pedestal Connectors Effortlessly install or remove large, stiff cables in confined areas Minimizes the hassle and hazards of having to force cables into the closed cable ports found on conventional mechanical connectors. You save time and labor. No crimping tools or dies or other special tools are needed for installation. Use with aluminum or copper cable. Ensure even force distribution in the cable/connector interface Cat. No. Conductor Range Outlets ABCK 6350 #6 350 ABCK 6600 ABCK 6600 DS* * -DS suffix indicates double set screws. # ABCK ABCK C36
2 Aluminum Set-Screw Bar Pedestal Connectors Single-Line Bar Available with up to eight outlets for aluminum or copper conductors Accepts aluminum or copper conductors Ensure maximum conductor contact pressure. Also break up interstrand oxides. Meets or exceeds ANSI C119.4 specifications ABC 4350 Cat. No. Outlets Length Boot Number Cable Range ABC /16 ABC /16 ABC /16 ABC /16 ABC /16 ABC /16 ABC /16 ABC ABC ABC ABC ABC ABC ABC ABC /16 ABC /16 ABC /16 ABC /16 BB 10 BB 11 BB 12 BB 10 BB 11 BB 12 BB 10 BB 11 ABC /16 BB 12 ABC /16 ABC /16 BB 14 ABC /4 BB 10 ABC /16 ABC /16 BB 13 ABC BB 12 ABC /8 BB 14 #6 250 # /0 750 ABC /16 BB 15 ABC /16 For oxide-inhibitor option, add -C suffix to the catalogue number. For streetlight-outlet option, add -SL suffix to the catalogue number. For insulating covers, see page C42. For special applications, please consult your Thomas & Betts representative. L For EZ Torque TM (shear-head screws) supplied in all outlets, add -TS suffix to the catalogue number. C37
3 ABC FB 33 Boot Aluminum Set-Screw Bar Pedestal Connectors Double-Row Bar High-strength aluminum alloy maintains constant bolting pressure on conductors Accepts aluminum or copper conductors Ensure maximum conductor contact pressure. Also break up interstrand oxides. Meets or exceeds ANSI C119.4 specifications Cat. No. Outlets Length Width Boot Number Cable Range ABC /8 BB 17 ABC /16 2 #6 250 ABC /16 FB 33* ABC /8 BB /2 ABC ABC /16 2-3/8 ABC /16 FB 33* ABC /16 2-3/4 #6 500 ABC /16 ABC /4 ** ABC /16 3-1/4 1/0 750 ABC /16 * EPDM Flexi-Boot, see page C42. ** For other insulating covers, please consult your Thomas & Betts representative. For oxide-inhibitor option, add -C suffix to the catalogue number. For streetlight-outlet option, add -SL suffix to the catalogue number. For special applications, please consult your Thomas & Betts representative. L W C38
4 Aluminum Pedestal Connectors Insulated and uninsulated pedestal connectors with up to 10 outlets Doubles cable capacity Enables safe installations and disconnects and provides insulation All screws are on top, and a 5 16 in. hex wrench is all you need Accepts aluminum or copper conductors Ensure maximum conductor contact pressure. Also break up interstrand oxides. Meets or exceeds ANSI C119.4 specifications ZVB 5053 Insulated Cat. No. Uninsulated Cat. No. Outlets L Cable Range ZVB 2023 ZBC /4 ZVB 3033 ZBC /4 ZVB 4043 ZBC /4 ZVB 5053 ZBC /4 ZVB 2025 ZBC /16 ZVB 3035 ZBC /16 ZVB 4045 ZBC /16 ZVB 5055 ZBC /16 For oxide-inhibitor option, add -C suffix to the catalogue number. For a kit containing 1 uninsulated and 2 insulated connectors, add -K suffix to the catalogue number. #6 500 L C39
5 Aluminum Multi-Tap Encapsulated Cable Blocks One-Way Configuration CSB S These dual-rated blocks can be used with copper or aluminum cables Wide range of cable sizes and number of outlets available in one-way configurations Safe and time-saving installation with no taping required UL Listed. Meets or exceeds ANSI C119.4 specifications. Dimensions (in.) Cat. No. No. of Outlets Wire Range Screw Size Length Width Height CSB 4-2 S 2 1-1/8 CSB 4-3 S 3 1-9/16 CSB 4-4 SAH* 4 2-1/16 CSB 4-5 S 5 #4 #14 Slotted 2-9/16 1-5/8 1-5/16 CSB 4-6 S 6 3-1/16 CSB 4-7 S 7 3-9/16 CSB 4-8 SAH* 8 4-1/16 CSB 2/0-2 S 2 1-5/8 CSB 2/0-3 S 3 2-3/8 CSB 2/0-4 S 4 3-1/8 CSB 2/0-5 S 5 2/0 #14 3/16 Hex 3-7/8 1-3/4 1-3/8 CSB 2/0-6 S 6 4-5/8 CSB 2/0-7 S 7 5-3/8 CSB 2/0-8 S 8 6-1/8 CSB S 2 1-7/8 CSB S /32 CSB S /16 CSB S #6 5/16 Hex 4-25/32 2-5/8 2-1/8 CSB S 6 5-3/4 CSB S 7 6-3/4 CSB S /64 CSB S 2 2-1/4 CSB S 3 3-1/4 CSB S 4 4-1/4 CSB S #10 5/16 Hex 5-1/4 3-1/8 2-1/2 CSB S 6 6-1/4 CSB S 7 7-1/4 CSB S 8 8-1/4 CSB S 2 2-7/8 CSB S 3 4-1/8 CSB S 4 5-3/8 CSB S #6 5/16 Hex 6-5/8 3-3/16 2-3/4 CSB S 6 7-7/8 CSB S 7 9-1/8 CSB S /8 * Not UL Listed, includes hex screw. C40
6 Aluminum Multi-Tap Encapsulated Cable Blocks Two-Way Configuration These dual-rated blocks can be used with copper or aluminum cables Wide range of cable sizes and number of outlets available in one-way configurations Safe and time-saving installation with no taping required UL Listed. Meets or exceeds ANSI C119.4 specifications. CSB Dimensions (in.) Cat. No. No. of Outlets Wire Range Screw Size Length Width Height CSB /8 CSB /16 CSB /16 CSB #4 #14 Slotted 2-9/16 1-5/8 1-5/16 CSB /16 CSB /16 CSB /16 CSB 2/ /8 CSB 2/ /8 CSB 2/ /8 CSB 2/ /0 #14 3/16 Hex 3-7/8 1-3/4 1-3/8 CSB 2/ /8 CSB 2/ /8 CSB 2/ /8 CSB /8 CSB /32 CSB /16 CSB #6 5/16 Hex 4-25/32 2-5/8 2-1/8 CSB /4 CSB /4 CSB /64 CSB /4 CSB /4 CSB /4 CSB #10 3/8 Hex 5-1/4 3-1/8 2-1/2 CSB /4 CSB /4 CSB /4 CSB /8 CSB /8 CSB /8 CSB #6 3/8 Hex 6-5/8 3-3/16 2-3/4 CSB /8 CSB /8 CSB /8 CSB CSB /16 CSB /16 CSB /4 CSB /0 3/8 Hex 8-5/8 3-3/8 2-1/4 CSB CSB /16 CSB /16 CSB /4 C41
7 CLR 6350 Insulated Aluminum Pedestal Connectors See the connector through the transparent insulator No lost parts to worry about Safer connections the connector securely locks in cover while the cable outlets self adjust Approved by the Federal government for utility use Cat. No. Outlets Wire Range CLR CLR CLR CLR CLR CLR CLR CLR #12 4/0 Insulating Covers for Set-Screw Bar Pedestal Connectors Rugged insulating covers to protect pedestal connectors Boot will not crack from cold embrittlement, will not cold flow and will not soften with heat Locking ribs prevent accidental removal of EPDM cover EPDM Rubber FB Series Cat. No. Height Length Width FB /4 4-3/4 3-3/8 FB 6 L 3-1/2 7-1/4 2-1/16 PVC BB Series FB 33 FB 6 L Cat. No. Height Height-1 Length Width H-1 BB /16 4-1/8 1-3/8 BB /8 5-7/8 2-1/8 BB /4 2-1/4 BB /16 3-3/4 1-7/8 BB /8 2-3/4 BB /16 BB /8 2-1/8 3-1/8 3-1/16 H H H-1 Polyethylene PB Series Cat. No. Height Length Width PB /16 PB 1 P 4 6-1/4 2-7/8 For cover sizes not listed, please consult your Thomas & Betts representative. All boots have a nominal wall thickness of 1 8 in. All sizes given for BB and PB series are inside dimensions. PB 2 PB 1 P C42
Underground Distribution
Aluminum Universal Quick Disconnect Transformer Connectors The EZ Mount connector is used on padmount distribution transformers that have a 5/8 in. or 1 in. secondary bushing stud one mounting hole accepts
More informationHomac. Underground Distribution. Table of Contents
Table of Contents Direct-buried, underground systems come with an ever-present challenge: How do you keep water out of the connections? Thomas & Betts has the products you need to make watertight splices
More informationUnderground Distribution
Aluminum Flood-Seal TM Mechanical Connectors Save outlet space These connectors feature the Sweetheart TM outlet configuration that nests two equal-sized service cables from #6 to 2/0 or two different-sized
More informationInsulated Street and Highway Lighting Mechanical Connectors Insulated connectors for above-ground applications.
Lighting Mechanical Connectors Insulated Lighting Mechanical Connectors Insulated connectors for above-ground applications. Rubber Insulation Ensures an insulated connection. Models with Street Light Connectors
More informationSUBMERSIBLE SECONDARY CONNECTORS SSBC350-4LI. Cond. Range H W L
SUBMERSIBLE SECONDARY CONNECTORS -1- Index TYPE SSBC350-L (Wide-Port Spacing) Rubber Insulated Secondary Connectors SURE-SEAL RUS Approved User friendly wide-port spacing (50% more room for cable training).
More informationHMC Connectors February 1, 2007
HMC Connectors February, 007 Section TRADE PRICE SCHEDULE Effective February, 007 CONTENTS Circuit Boss Encapsulated Cable Blocks & Splices / Reducers Pages - 6 Modular Power Distribution Block System
More informationSUBMERSIBLE SECONDARY CONNECTORS
SUBMERSIBE SECONDARY CONNECTORS TYPE SSBC350- (Wide-Port Spacing) Rubber Insulated Secondary Connectors SURE-SEA RUS Approved User friendly wide-port spacing (50% more room for cable training). Multiple
More informationType Termination Cable Size Copper Aluminum 2 CP2C1-1/0 CP1/0C1-2/0 CP2/0C1-4/0 CP4/0C1 CP4/0A1. Cable 250kcmil CP250C3 CP250A3
C 600V rotectors ECIL UROE Description # for Type Type Termination ize Copper luminum 2 C2C1-1/0 C1/0C1-2/0 C2/0C1-4/0 C4/0C1 C4/01 250kcmil C250C1 C2501 1 to 350kcmil C350C1 C3501 400kcmil C400C1-500kcmil
More informationAnti-Rotational Connectors No-turn design keeps connector securely in place even under vibration. Anti-Rotational Connectors
Anti-Rotational Connectors No-turn design keeps connector securely in place even under vibration. Anti-Rotational Connectors Blackburn Anti-Rotational Connectors are designed with a rib on the bottom that
More informationTERMINATION ENCLOSURE OPTIONS
TERMINATION ENCLOSURE OPTIONS Add suffix: R - Reverse Stagger the Bus Bars (to run cable in from the top) CU - Copper NEMA Mount Bus Bars C - Plastisol Covers for Bus Bars DF - Dead Fronts T - Tin Plated
More informationCP 600V Cable Protectors
Protecrs Mersen CP Protecrs are special purpose limiters which are crimped or bolted cables or terminals clear and isolate faults quickly, increasing the reliability of service entrance and distribution
More informationCompression Connectors
Compression s Compression H- s Type WR Wide Range luminum s O and D Die Seven Program Pass the requirements of NSI C9. Seven Program provides superior connector performance, lower connection Field-proven
More informationOur overhead products go above and beyond all others. QUICK REFERENCE. Overhead Connectors. & Covers. Overview
Overview QUICK REFERENCE Overhead Connectors & Covers page(s) Our overhead products go above and beyond all others. We have plenty of overhead connectors. From transformer eyebolts and stirrup connectors
More informationConnector Installation Guide Compression and Mechanical Connectors
Connector Installation Guide Compression and Mechanical Connectors Typical Cross Section of a Compression Connector Before Installation Before compression, a typical cross section of cable consists of
More informationBonding & Grounding. Telecommunications Main Ground Bars. Telecommunications Main Ground Bar Kits
PhysicalSupport.D 1/21/08 2:10 PM Page 121 GB4X12TMGB GB4X20TMGB GB4X12TMGBKIT Telecommunications Main Ground Bars and Kits Manufactured of 1/4 thick electrolytic tough pitch 110 alloy copper bar. Includes
More information600A Deadbreak Elbow. K656LR Elbow Connector (with Test Point) Features:
Issue Date: 07/17/2017 Page: 1 of 5 PSS- K656LR Elbow Connector (with Test ) Applications: The Elastimold K656LR (with test point) is designed to provide fully shielded, dead-front submersible cable connections
More informationGrounding Accessories
Accessories Eaton offers a variety of grounding which are sold individually or as a kit. Kits are available as one kit per rack, allowing for ease of stocking and reordering. Vertical rack ground bar kit
More informationDISTRIBUTION PRODUCTS
DISTRIBUTION PRODUCTS INDEX SECTION DI OTHER DISTRIBUTION SERIES DESCRIPTION PAGE WILDLIFE PROTECTORS CC101 / CC170.. CUT-OUT COVER, ONE PIECE WILDLIFE PROTECTOR... DI-3 GS... ONE PIECE WILDLIFE PROTECTOR...
More informationCable Connectors & Conduit Sealing Bushings
RA1 Cable Terminators General Information Purpose: Cable Terminators and Sealing Fittings are used on conduit ends and cable ends to effectively seal the cable and conduit. Where Installed: Wherever the
More informationProduct Catalog. Rev. 612 r1
Product Catalog Rev. 612 r1 PIPE FITTINGS CONDUIT FITTINGS PRODUCT CATALOG Pipe Nipples Welded and Seamless Carbon Steel 2 Pipe Nipples Welded and Seamless Stainless Steel 3 Pipe Nipples End Finishes 4
More informationGROUNDING & BONDING PRODUCTS
GROUNDING & BONDING PRODUCTS Busbars Page 5-3 Insulators Page 5-8 Grounding Products Page 5-9 Compression Tools, Lugs & Taps Page 5-14 Learn About CPI s Extended Limited Warranties for coverage of (2)
More informationPOWR-BLOKS. POWR-GARD Blocks and Holders Datasheet. Distribution Blocks Splicer Blocks Covers. Connectors. Ampere Ratings. Description.
Distribution Blocks Splicer Blocks Covers Connectors Box lug connectors are designed for use with a single or multiple, solid or class B or C stranded conductor. For UL approved use of more than one conductor
More informationGround Wire Size. 1/2 in /4 in. 2 in /2 in. 3-1/2 in TB. 4 in. 5 in. #4 4/0 AWG 3906-TB
lamps Waterpipe Ground lamps Waterpipe Ground lamps Waterpipe Ground lamps 2-T Ground Wire Size Water Pipe Size 1/2 in., 3/4 in., 1 or rebar 4-10 3-T 1-1/4 in., 1-1/2 in. or 2 in. #6, #4, #2 WG 4 2-1/2
More informationSwitches. Common Used Terminology:
Switches Product Description Page# Ball Switches 158 Breakaway Switch 158 Master Disconnect Switch Battery Master Disconnect Switch & Face Plate 159 Plunger Switch Sealed 158 Push/Pull Switches Medium-Duty,
More informationPOWR-BLOKS. POWR-GARD Blocks and Holders Datasheet. Distribution Blocks Splicer Blocks Covers. Connectors. Ampere Ratings. Description.
Distribution Blocks Splicer Blocks Covers Connectors Box lug connectors are designed for use with a single, solid or class B or C stranded conductor. Use of more than one con ductor per connector opening
More informationWind Power Solutions. Make Energy Renewable and Reliable!
Wind Power Solutions Make Energy Renewable and Reliable! Reliable Thomas & Betts Products for Clean, Green, Thomas & Betts makes all the products that connect and protect a wind farm and its power distribution
More informationMolded Current-Limiting Fuse
Molded Current-Limiting provide fullrange fault current protection using specially designed fuse elements, rated through 23kV line to ground and 50kA interrupting current. Construction is modular with
More informationCable Connectors & Conduit Sealing Bushings
RA1 Cable Terminators General Information Purpose: Cable Terminators and Sealing Fittings are used on conduit ends and cable ends to effectively seal the cable and conduit. Where Installed: Wherever the
More informationVoltage Rating Current Rating Material. Connector. Catalog/ ordering number. Catalog/ ordering number. 1 of 6
Distribution Blocks Splicer Blocks Covers Description POWR-BLOKS TM power distribution blocks offer a safe, convenient way of splicing cables, providing a fixed junction tap-off point or splitting primary
More informationDISTRIBUTION TOOLS SERIES GP FARGO CONNECTOR WRENCHES
DISTRIBUTION S SERIES GP FARGO ONNETOR WRENHES S GP WRENHES Design optimized for lineman use handle separates both ends. (GP201-204 & GP216 are 1 piece style see note) Specially constructed for proper
More informationInstalling and Removing Power Supplies
Power Supply Overview, page 2 Installing Power Supplies, page 3 Removing Power Supplies, page 8 Finding the Serial Number, page 9 1 Power Supply Overview Power Supply Overview You can install two types
More informationPLP Compression Dead-end & Jumper Terminal for ACSR & ACSS Conductors
MARCH 2017 PLP Compression Dead-end & Jumper Terminal for ACSR & ACSS Conductors Be sure to read and completely understand this procedure before applying product. Be sure to select the proper PREFORMED
More informationMedium Voltage Power Cables
Medium Voltage Power s Distribution s (CN s) are suitable for use above ground in open air, in conduit in air, directly buried, in underground duct, or aerially when suspended on a messenger wire. CN cables
More informationVoltage Rating Current Rating Material. Connector CATALOG/ ORDERING NUMBER CATALOG/ ORDERING NUMBER. 1 of 6
Distribution Blocks Splicer Blocks Covers Description POWR-BLOKS TM power distribution blocks offer a safe, convenient way of splicing cables, providing a fixed junction tap-off point or splitting primary
More informationConduit Bushings for Rigid Metal Conduit and IMC
Applications Used with a locknut to terminate rigid metal conduit or IMC conduit to a box or enclosure. Features Provides a smooth pulling surface. Material/Finish BU: malleable iron/zinc electroplated
More informationClass I Division 2. 1 to 25 kva. Applications. Specifications. Standards. Options and Accessories. Features, Functions, Benefits.
Class I Division 2 10 1 to 25 kva Applications n Class I Division 2 units are used in hazardous locations to maintain a safe environment. Specifications n Class I Division 2, Groups A, B, C, D n T3C temperature
More informationControl Cable Type P 600/1000 volts DRILMAR 125-XE Crosslinked Polyolefin Insulated Drilling Rig and Marine Cable
CP Jacket (overall optional) Armor (optional) CP Jacket Flexible Tin Coated Copper ed Color Coded XLPO Polyolefin Insulation 600/1000 volts Features Engineered for easiest installation. Extra flexible
More informationNumber Tube I.P.S. Rod Size or O.D. Range Cable H J W
TYPE GAR D-28 FENCE POST GROUNDING CONNECTOR For Parallel or 90 Copper Cable Connection To Rod or Pipe with the Same Connector High copper alloy ground connector for joining a range of cable, parallel
More informationDEMANDING CONDITIONS, DEMAND THE BEST!
DEMANDING CONDITIONS, DEMAND THE BEST! The Superior Connection for Industrial & Processing Environments OEM Equipment Infrastructure Projects Alternative Energy Data Centers LiquidTIGHT Alloy Steel Electrical
More information600 A 35 kv class BT-TAP deadbreak connector
Supersedes 600-55 July 2014 600 A 35 kv class BT-TAP deadbreak connector General Eaton's Cooper Power Systems 600 A 35 kv Class BT-TAP deadbreak connector is used to terminate high-voltage underground
More informationMI Heating Cable. HDPE jacketed, copper sheathed MI cable. For surface snow melting in concrete, asphalt, and pavers. MI Heating Cable Configuration
MI Heating Cable HDPE jacketed, copper sheathed MI cable For surface snow melting in concrete, asphalt, and pavers Pipe Freeze Protection and Flow Maintenance Fire Sprinkler System Freeze Protection MI
More informationSeptember Cable termination solutions Lugs and tools for reliable crimping
September 2016 Cable termination solutions Lugs and tools for reliable crimping ABB products are part of your success Designed to perform 1 2 3 4 5 7 6 7 8 1 Rail and transportation 2 Power utility and
More informationStud connection system HSK
CONTA-CONNECT system HSK The newest generation of stud terminals from CONTA-CLIP offers secure connections for all energy-transmitting applications. Depending on the conductor cross-section, stud terminals
More informationRG7H1R-1,8/3 26/45 kv RG7H1OR-1,8/3 18/30 kv
Medium voltage - Energy RG7H1R-1,8/3 26/45 kv RG7H1OR-1,8/3 18/30 kv Structure and electrical, physical, mechanical requirements: CEI 20-13 IEC 60502 Flame propagation: EN 60332-1-2 Measurement of partial
More information600 A 15 and 25 kv class deadbreak accessories, tools, and replacement parts
Deadbreak Connectors Catalog Data CA650007EN Supersedes March 2015 COOPER POWER SERIES 600 A 15 and 25 kv class deadbreak accessories, tools, and replacement parts General Eaton connects and assembles
More informationFlame-retardant PVC offers the protection you need.
Solid wall wiring duct Flame-retardant PVC offers the protection you need. Solid wall duct PVC Engineered to restrict wire access Constructed of flame-retardant PVC Improved flush sidewall and cover style
More informationCorrosion Protection for Electrical Conduit and Fittings
Easy access for pulling, splicing, mounting and maintenance! 3 4" LB Form 8 conduit body and cover 2 1 2" LB Form 8 conduit body and cover OCAL-BLUE Double-Coat Conduit Bodies With OCAL-BLUE Double-Coat
More informationFuseholders Enclosed Fuseholders > Circuit Board Mounted. Shock-Safe Holder (Circuit Board Mounted) Product Characteristics.
Fuseholders Enclosed Fuseholders > Circuit Board Mounted Pb Shock-Safe Holder (Circuit Board Mounted) Product Characteristics Dimensions.68" 1.77".44".20".24".040".49".48".12" Compatible Fuse Types Description
More informationOPERATING INSTRUCTION MANUAL QUICK-KON AUTOMATED CRIMPING SYSTEM for Catalog Number: TNB170-ELECDIE TABLE OF CONTENTS
OPERATING INSTRUCTION MANUAL QUICK-KON AUTOMATED CRIMPING SYSTEM for Catalog Number: TNB170-ELECDIE IMPORTANT: Read and understand all of the instructions and safety information in this manual before operating
More informationMI HEATING CABLE COPPER AND HDPE JACKETED COPPER SHEATHED MI CABLE. For heat loss replacement, floor heating and radiant space heating
MI HEATING CABLE COPPER AND HDPE JACKETED COPPER SHEATHED MI CABLE For heat loss replacement, floor heating and radiant space heating MI Configuration Type SUA Design A Heated length lead length PRODUCT
More informationCONTENTS OVERHEAD SLEEVES AND LUGS
CONTENTS OVERHEAD SLEEVES AND LUGS SECTION 5 SECTION 5 OVERHEAD CONDUCTOR SLEEVES & LUGS..................45 NON TENSION SLEEVES.......................................46 FULL TENSION SLEEVES TYPE A...............................46
More informationControl Cable Type T/N 600/1000 volts DRILMAR 90 Polyvinyl Chloride/Nylon Insulated Drilling Rig and Marine Cable
PVC Jacket (overall optional) Armor (optional) PVC Jacket Color-coded PVC/Nylon Insulation Copper ed 600/00 volts Features Maximum conductor operating temperature: 90ºC per IEEE, UL, and CSA. Meets applicable
More informationFor the plastics machinery industry Fixed bayonet thermocouple Model TC47-FB
Electrical temperature measurement For the plastics machinery industry Fixed bayonet Model TC47-FB WIKA data sheet TE 67.24 Applications Plastics and rubber industry For direct installation into the process
More informationCopper Bar... ASTM B187, B152 Silicon Bronze... ASTM F468, F467, F651
Eaton offers a range of cable grids and distribution frames to meet various telecommunications applications. Cable grids feature light-weight, yet durable steel c-channel, and are design to support cable
More informationGrounding Solutions for Data Center Applications
Grounding Solutions for Data Center Applications B D A A C E G F E Legend For Typical Grounding Application (layout on following page) A) B) C) D) E) F) G) Vertical Rack Ground Bar Kit (see page 4) Horizontal
More informationFM9 Aluminum Unilet Conduit Outlet Bodies, Covers and Gaskets For use with Rigid Steel, Rigid Aluminum and IMC.
FM9 Aluminum Unilet Conduit Outlet Bodies, Covers and Gaskets For use with Rigid Steel, Rigid Aluminum and IMC. : Conduit Bodies Applications Serve as pulling fittings. Make bends in conduit system. Provide
More informationCONSOLIDATED EDISON COMPANY OF NEW YORK, INC. 4 IRVING PLACE NEW YORK, NY DISTRIBUTION ENGINEERING NON-NETWORK SYSTEMS
CONSOLIDATED EDISON COMPANY OF NEW YORK, INC. 4 IRVING PLACE NEW YORK, NY 10003 DISTRIBUTION ENGINEERING DEPARTMENT NON-NETWORK SYSTEMS SPECIFICATION EO-100186 REVISION #10 MAY 2007 EFFECTIVE DATE MAY
More informationBRASS FITTINGS and Related Products
Discount Hydraulic Hose.com Cat. BR602 February, 2006 Prices Subject to change BRASS FITTINGS and Related Products Air Brake Fittings: Nylon Tubing 2 Push-In Air Brake Fittings 4 Pre-Assembled Air Brake
More informationCondulet Single Gang Cast Device Boxes With and Without Mounting Lugs for Threaded Rigid and IMC Conduit
Condulet Single Gang Cast Accessories Pages to 44 F Application: Cast device boxes are installed to: accommodate wiring devices act as pull boxes for conductors in a conduit system provide openings to
More informationType M3 Hookstick Disconnect Switches Up to 38kV 600 or 900 Amp 40kA Momentary
14B-2 Type M3 Hookstick Disconnect Switches Up to 38kV 0 or 900 Amp 40kA Momentary Application The Chance Type M3 Disconnect Switch is a single-phase hookstick operated switch. It is for manual switching
More informationRaychem CSJA Safety Instructions. Safety Instructions. Customer Service. Kit Contents. Installation Instructions
Raychem CSJA 1521 Cold-Shrinkable Splice for single core polymeric insulated (XLPE-EPR) cables up to 15kV for tape, wire, Unishield, LC shield, JCN, and flat strap neutral cable UniShield is a trademark
More informationSECTION PANELBOARDS
SECTION 16470 PANELBOARDS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. The general provisions of the contract including General and Special Conditions and General Requirements shall apply to all work under
More informationa Nexans company Medium voltage symmetrical separable connectors - Interface C -
a Nexans company Medium voltage symmetrical separable connectors - Interface C - Catalogue 2011 Nexans Network Solutions Div. Euromold COMPANY PRESENTATION EUROMOLD Euromold is the leading European specialised
More informationHex-Key Wrenches Hex-K ey W renches
Hex-Key Wrenches Klein hex-keys are the tools professionals cannot afford to be without. Heat-treated and tempered for superior strength and durability, Klein hex-keys are designed for a precise fit in
More informationyour Green Power WIND POWER SOLUTIONS only Greener
your Green Power WIND POWER SOLUTIONS only Greener WIND POWER SOLUTIONS Thomas & Betts is committed to being your partner in power delivery by leading the industry in innovative wind power solutions and
More informationPOWR-BLOKS. POWR-GARD Blocks and Holders Datasheet. Distribution Blocks Splicer Blocks Covers. Connectors. Ampere Ratings. Description.
Distribution Blocks Splicer Blocks Covers Connectors Box lug connectors are designed for use with a single or multiple, solid or class B or C stranded conductor. For UL approved use of more than one conductor
More informationASP Series Steel Body NFPA Cylinder Line
Series Steel Body NFPA Cylinder Line www.numatics.com Table of Contents Series Features and Benefits 3 Standard Mounts 4 How to Order 5 Port Size Availability 6 Dimensions 7-34 Rod Ends 7 Large Bore 8
More informationCL-3/1297 CGL INDUSTRIAL POWER INPUT CONNECTORS UP TO 700 V
CL-3/1297 INDUSTRIAL POWER INPUT CONNECTORS UP TO 700 V Contents Introduction... 2 Features... 3 How to Order... 4 Part Number Explanation... 5 Technical Data... 6 250 / 500 Volt Contact Arrangements...
More informationBlocks and Holders. Specifications. Voltage Rating 600 V Current Rating Based on NEC Table , using 75 C copper wire Material.
6Fuse Blocks and Holders Blocks and Holders Distribution Blocks Splicer Blocks Covers Description POWR-BLOKS TM power distribution blocks offer a safe, convenient way of splicing cables, providing a fixed
More informationF Series Terminators and Accesories
F Series Terminators and ccesories Our "F" series terminators are passive electronic circuitry designed to block 60 cycle and terminate RF signals on unused equipment ports. They are necessary to prevent
More informationPOWER. Lengths (ft) Nominal Overall Diameter. Part Number. Gauge /strands
GPT HOOK-UP: round construction wire is made of one, stranded conductor insulated with polyvinyl chloride. Wire used for connecting low voltage power in vehicles, control equipment, RVs and other. Gauge
More informationFM9 Aluminum Conduit Outlet Bodies, Covers and Gaskets For use with Rigid Steel, Rigid Aluminum and IMC.
Applications Serve as pulling fittings. Make bends in conduit system. Provide openings for splicing. Connect and change direction of conduit runs. Allow connections for branch runs. Permit access to conductors
More informationAMP STACK III Modular connection system
III Modular connection system The AMP STACK MARK III 25 pair are designed to mass terminate communication cables of solid copper or aluminum conductor wires ranging from 0.32 to 0.8 mm of diameter, (28
More informationArktite Heavy Duty Circuit Breaking Plugs and Receptacles
Arktite Heavy Duty Circuit Breaking Plugs and Receptacles Industrial Heavy Duty Non-hazardous Areas Applications: Arktite circuit breaking plugs and receptacles are used: To supply power to portable electrically
More informationCam-Lok Single Pole Connectors
Cam-Lok Single Pole Connectors Cooper Interconnect Cam-Lok Single Pole Connectors are specially designed to provide the ultimate in reliable service, even under the most severe operating conditions. These
More information...at Altech, of course!
FANTASTIC approved FERRULES...at Altech, of course! Approved for the US & Canadian Market Other great Altech CSA approved products: Miniature Circuit Breakers / Manual Motor Controllers DIN Rail and Panel
More informationMDual Power Connector
MDual Power Connector Overview Utilizing the efficient high-current design of the PowerBud contact technology, the MDual power connectors carry high power in a small package and features self-aligning
More informationThe obvious choice in piping cushion clamp assemblies since 1966
The obvious choice in piping clamp assemblies since 1966 TM INTRODUCTION ydra-zorb Co. has been the leader in the strut mounted clamp market for over 40 years, offering a wide variety of solutions when
More informationHex-Key Wrenches Hex-K ey W renches
Hex-Key Wrenches Klein hex-keys are the tools professionals cannot afford to be without. Heat-treated and tempered for superior strength and durability, Klein hex-keys are designed for a precise fit in
More informationWeatherproof Products
Technical Specifications pplications : Junction for branch conduits in hazardous locations ccessible wiring chamber provides a convenient location to maintain or change a system, pull conductors and make
More informationHDD Insert Series. Application Specification Apr 30 th, 2017 Rev. A. Table of contents
HDD Insert Series Table of contents 1. INTRODUCTION... 2 2. SUPPORTING DOCUMENTS... 2 2.1. Customer drawings... 2 2.2. Product specification... 2 2.3. Application Specification... 2 2.4. Standards... 2
More informationHIGH-TRO-REEL (Tension Type)
HIGH-TRO-REEL (Tension ) Multi-Lead Indoor Use Insulated Trolleys Please follow the safety precautions on pages 2 and 3. 37 recommended power supply system for hoists and cranes. Installed using tension
More informationA. General: Deliver, store and handle wire and cable in accordance with the manufacturer's instructions and as specified in Division 1.
SECTION 16120 WIRES AND CABLES 600 VOLTS AND BELOW PART 1 GENERAL 1.1 SUMMARY A. Section Includes: Requirements for providing all wires and cables rated at 600 volts and below for complete electrical systems
More informationLCT Shielded Primary UD EPR LCT Shielded Primary UD EPR Cable
ed Primary UD EPR ed Primary UD EPR Cable Aluminum or Copper Conductor. EPR Insulation. Copper Longitudinal Corrugated Tape (). Low Density Polyethylene Jacket. APPLICATIONS Predominantly used for primary
More informationI/O Card Interface Connectors
I/O Card Interface Connectors NX Series Features 1. Low Profile Protorusion above the PCB board is only 2.9mm, and the connectors can be mounted to type I and II I/O cards. 2. EMI/RFI protection Full metal
More informationELB ELB
ELB-35-600 ELB-35-610 600A T-Body Elbow Connectors for Copper Tape (CT), Jacketed Concentric Neutral (JCN), and Concentric Neutral (CN) cables up to 35kV class Safety Instructions When installing electrical
More informationType 567. Wafer Style Butterfly Valve
Wafer Style Butterfly Valve Type 5 General Size: 2 12 Outer Body: Glass-filled PP Material: PVC, CPVC, PROGEF Standard PP, ABS, SYGEF Standard PVDF Seals: EPDM, FPM, PTFE/FPM Stem: 31 stainless steel Operation:
More informationInstallation Instructions for Lifeline MC Cable Splice Using Ceramic Standoffs
Technical Information Sheet # 402 Subject: Installation Instructions for Lifeline MC Cable Splice Using Ceramic Standoffs Classified by Underwriters Laboratories to UL 2196 for one hour installations For
More informationJefferson Electric Class I Division 2 Transformers for hazardous locations
Class I Division 2 Jefferson Electric Class I Division 2 Transformers for hazardous locations Jefferson Electric offers a full line of Class I Division 2 transformers. Jefferson Electrics Class I Division
More informationInstallation Instructions for Lifeline MC: Cable Splice Using Ceramic Standoffs Technical Information Sheet #402
Installation Instructions for Lifeline MC: Cable Splice Using Ceramic Standoffs Technical Information Sheet #402 Classified by Underwriters Laboratories to UL 2196 for one hour installations For use with
More informationProduct Comparisons. Door Closers. stanleysecurity.com
Yale 4400 Series Certification STANLEY QDC100 Yale 4400 Series Certified BHMA/ANSI A156.2 Series Grade 1 Yes Yes UL 10B Yes Check with Manufacturer Warranty STANLEY QDC100 Yale 4400 Series Mechanical Warranty
More informationPRODUCT SHEET. Elastimold advanced connection system (shear bolt)
PRODUCT SHEET Elastimold advanced connection system (shear bolt) 2 Elastimold cable accessories The Elastimold advanced connection system - shear bolt is the latest solution to be incorporated into the
More informationLithium-Ion Battery-Powered Tools
Lithium-Ion Battery-Powered Tools Thomas & Betts. Your best connection for innovative solutions. Wire & Cable Management Cable Protection Systems Power Connection & Control S a f e t y Te c h n o l o g
More informationAluminum Mechanical Lugs
luminum Mechanical ugs MNI INUSTRI ONNTORS One- and Two-onductor luminum ugs Suitable for use with either copper or aluminum conductors Manufactured from high strength 6061-T6 aluminum alloy lectroplated
More informationSICON. Connectors with Stepless Shear-Off Bolts. the power connection THE PFISTERER GROUP
SICON Connectors with Stepless Shear-Off Bolts THE PFISTERER GROUP the power connection SICON The Right Connection for All Conductors For years now, bolted clamps, connectors and cable lugs have been gaining
More informationHigh Voltage Joints and Terminations up to 72,5 kv 145 kv
High Voltage Joints and Terminations up to 72,5 kv 145 kv 3M Cold Shrink Termination Kits QT-III and Joint Kits are designed to provide high reliability and save you time and money. They install quickly
More informationCLEVIS HANGER 401. Standard Duty B A
CLEVIS HNGER 40 Standard Duty Size Range: /2 through 24 Surface Finish: Electro-zinc plated non-insulated pipe lines Standard electro-zinc plated finish is cleaner, provides superior corrosion protection
More informationCAUTION: Use a rag at the point you are going to pry. because aluminum alloy wheels can be easily damaged.
Front Suspension Knuckle/Hub Replacement NOTE: Use only genuine Honda aluminum wheel weights. Non-genuine aluminum wheel weights may corrode and damage aluminum wheels. Remove the center cap by prying
More informationHD Insert Series. Application Specification Apr 30 th, 2017 Rev. A. Table of contents
HD Insert Series Table of contents 1. INTRODUCTION... 2 2. SUPPORTING DOCUMENTS... 2 2.1. Customer drawings... 2 2.2. Product specification... 2 2.3. Application Specification... 2 2.4. Standards... 2
More informationCompact Electric Actuated Ball Valves PVC Body, Teflon/EPDM Seals 1/2 to 1 inch Pipe
Compact Electric Actuated Ball Valves PVC Body, Teflon/EPDM Seals 1/2 to 1 inch Pipe SERIES Features Industrial quality miniature actuator Industrial grade True Union ball valve Visual valve position indicator
More information