IN STOCK DIDDE PARTS 22 & Parts
|
|
|
- Ruby Eileen Cole
- 6 years ago
- Views:
Transcription
1 DG M Water Form Roller DG M Water Form Roller DG-1715 Water Form Roller DG-1714 Water Ductor Roller DG-1301 Ink Ductor DG-1303-SP Ink Idler Roller DG 2143 DG-1302-A Ink Form Roller Large DG-1302-B Ink Form Roller Small DG-1303 Ink Inter. Rider Roller DG-1314 Water Ductor Roller DG-1315 Water Form Roller DG-1701-A Ink Ductor Roller DG-1702-L Ink Form Roller Large DG-1702-M Ink Form Roller, Med DG-1702-S Ink Form Roller, Small DG-1703-A Ink Rider Roller DG-1703-B Ink Rider Roller DG-1302-L Ink Form Roller Large DG-1302-S Ink Form Roller Small Ink Rider Roller DG-1703-B Ink Rider Roller DG-1703-A Ink Ductor Roller DG-1701-A Ink Intermediate Roller DG Water Form Roller DG M Water Ductor DG Ink Ductor DG Ink Form Roller Large DG-1302-L (Tube) Water Form Roller DG 1315 Rogers Sleeves Jomac Ductor, The Cover & Baseline # Hurst Molleton Ductor Dampening Cover DG-1309 L.O.R. Compressible Blanket Syn-Tac 11130, DG Ink Ductor Syn-Tac 11150, DG Water Ductor DG-1302-A Ink Form Large DG-1702-J-A Jumbo Form Roller DG-1702-J-B Jumbo Ink Form Roller Dico Tex Roller Covering Jomac Atex Ductor Cover Jomac Green Sleeve Ductor #613 Hynton Dampening Covers FD 2014 Form or Ductor Copper Roller DG AHD Ink Rider Roller w/bearing DG M Water Form Roller DG Ink Ductor Roller DG Water Ductor Roller DG A Ink Ductor Roller DG A Ink Rider Roller DG B Ink Distributor Roller DG C Ink Distributor Roller Soft DG D Ink Rider Roller w/o bearing DG D Ink Rider Roller DG L Ink Form Roller DG M Ink Form Roller, Med DG S Ink Form Roller, Small Ink Form Small, DG S Ink Distributor Roller DG B Ink Distributor Roller DG C MLC Oscillating Form Roller Ink Form Roller Medium DG M Ink Ductor Roller DG Ink Rider Roller DG A Water Pan Roller DG Ink Distributor Roller DG B DG Ink Ductor Roller DG L Ink Form Roller DG S Ink Form Roller DG A Ink Distributor Roller DG B Ink Distributor Roller DG C Ink Distributor Roller DG D Ink Rider Roller DG DG Ink Rider Roller DG D DG Water Pan Roller Syn-Tac (2) Ink Rider Syn-Tac (1) M Water Form Syn-Tac (1) Ink Form Small Syn-Tac (1) Ink Ductor Syn-Tac (1) Water Ductor Metering Roller Quadflow DG B DG B Metering Roller Quadflow DG B Water Form Quaflow Pan Roller DG DG Pan Roller DG Water Pan Compupress Roller #10 DG Water Pan Triflow (MVP) DG Water Form Roller DG A Water Form Roller DG DG A Water Pan Roller DG DG Metering Roller DG DG Water Form Roller DG w/o bearing DG B Water Pan VIP DG Ink Form VIP DG Ink Distributor VIP DG Ink Distributor Roller VIP DG Water Form VIP DG Ink Distributor VIP DG Distributor Roller VIP
2 11 Parts Plate G/S 1-Plate W/S 2-Impression Journals Blanket Cylinder New Blanket Cylinder Rebuilt 14 Parts Cross Perf Gear Parts Plate Cylinder Blanket Cylinder Gear Impression Gear G.S Key Plate Cylinder Bushing Blanket W.S Blanket W/S 4-Blanket G/S 4-Plate W/S 4-Plate G/S 1-Disengage 22 & Impression W/S 1-Impression G/S x 20 ½ Blanket Cylinders 6-Copper Rollers x 20 ½ wide # Copper Vibrator Rollers x 20 ½ wide # x 17 ½ Anvil Cylinder (Resurfaced) 2-Blanket G/S 4-Plate G/S # Plate W/S 1-Impression G/S & 24 Perf Bushings C Gear B Gear 24 Perf F (2) Didde MCP Apollo Parts Decurling Bar # Stud Idler Gear # Brass Links # Stud # Brass Bushing # Vibrator Gear Assembly
3 Jump Perf Ring # & Pull Wheel Tires # SW091 Arm # STACKER PARTS Brake Motor (New) New Style Stacker Brake Motor # B (New) New Style Stacker Gear Motor # (New) Bodine Motor ROLLSTAND Tidland Core Adapters 3 to Air Cylinder BELTS (21) 630H100 Infeed Infeed Drive Belt (2) 570H100S (4) (2) , L050 (10) Folder H050 (3) H100 (9) 510L (4) H100 (18) H100S (4) H100S (2 Pair) (2) L (2) , H100 Folder Set L050 (8) + 5 Water Pan 450L L100 (2) (6 sets of 2) 540H150 (6) H150S (9) (5) (2 Pair) 450H050 (4) 450H100 (27) 450H100G (1) 450H H H075 (2) 510H100 (5) 540H075 (16) 540H100 (8) 540L100 (2) 540H150 (8)G 420L075 (2) 420H100 (3) 420L100 (6) 630H075 (3) 660H100 (3) 480H050 (3) 480L050 (9) 480L H100 (12) 540H050 (4) 540L050 (6) 270L075 (2) 270H100 (4) SW H100 (10) SW19978 Gates TP 600L 235MC Goodyear 187L L L L (3) 390L H L075 (2) 330H100 (2) (2) 345L050 (3) 345L H L L075 (2) 390L075 (2) 390H100 (4)
4 800H100 (2) 900H H100 (2) 850H H H100G 1000H100 (2) Rewind Belt VBELTS (144 tooth Sheeter Delivery Belt) ELECTRONICS Warner Electric # Magnet 24 Volt, IM LK TB 1000, 33 Watt Warner Electric # Magnet TB Volt IM LK Warner Electric # Armature Tension Brake TB Warner Electric # Armature w/face, 10 inch Warner Electric # Dual Magnet Carrier MTB-II 10 Warner Electric # ARTM Carrier MTB-II 10 Inch Taper Warner Electric # Magnet Electro Disc Brake Replacement, 24 Volt Warner Electric # Universal MTG Bracket Dual MTB Warner Electric # Friction Pad MTB-II Warner Electric # TCS Pivot Point Sensor Warner Electric # TCS-167 Power Supply Warner Electric # BKBD Assembly W/S MCS-203 Warner Electric # MCS-203 Dancer Control Warner Electric # TCS-210 Dancer Control Module Warner Electric # MCS-166 Power Supply Reliance PC Board DV/DT PRTD PC Board # Reliance Electric PC Board # Reliance Electric PC Board # Reliance Electric PC Board # Reliance Electric PC Board # Reliance Electric PC Board # Reliance Electric PC Board # Reliance Electric Relay Board # Reliance Electric Drive Motor MInipak # Reliance Electric PC Board # Reliance Electric Control Module Board # Reliance Electric Drive Board # Reliance Electric Relay Assembly # R Reliance Electric Coil 110/120 Vac 8.10 HM # T Reliance Electric Regulator Module # Reliance Electric Contactor DC # R Reliance Electric Circuit Breaker # KXX PC Board Pilot Relay Card # PC Board Remote Operator Adaptor # PC Board Field Loss # PC Board Regulator Assembly # BM PC Board $ A2 Transformer Assembly # R Transformer # R Rectifier Stack MaxPak Plus 4 # S Rectifier Stack R Rectifier Stack # U Transformer Assembly # V Drive Board 460V DV/DT # Relay Board # Surge Suppressor # AA Westinghouse Circuit Breaker Motor Circuit Protector, 100 AMP #HMCP100L3C Westinghouse Motor Starter, 3 Pole Cutler Hammer Contactor # C10CN3, 27 amp, 120V COIL 3PH 10HP Cutler Hammer Relay, Series A, 2 Pole, 24V, # 9575H Cutler Hammer Pushbutton MUSH 28MM Twist Release, E22ML2 Eaton Corporation, Cutler Hammer Grey Roto-Push Operator 2 POS./2 N.O. C/B # 10250ED864-2
5 Allen Bradley Time Delay, Pneumatic # 700-NT Dayton Relay Time Delay 10 amp 1/3HP 120/240VAC Didde Board # A Didde Tachometer # & Louis Allis Regulator Power Supply Board # 46S Dynamatic PC Board Assembly # Minarik RG51UA Drive, DC Regenerative Minarik MMRG-30-U Drive, 4Q SCR Chassis Variable Transformer # STACO 171 Relay Coil: V 50/60 HZ 4 POLE 3NO/1NC # BF31F Transformer PRI115V 50/60HZ SEC 6 3VCT 3 Amp # 48GB11A Filament Transformer, # F-16X Time Delay Relay 7 Amp 120 VAC 1 Second # 319B001Q1X Power Supply 6/2 8 Amp 115/230 VAC 50/60HZ 24 DC/10A, SDN Pushbutton Standard Black Button 150V 2N0/2NC, # CR104A8202 Photo Automation Sensor (ML /73/136) # Timer Analog Set Solid State, # STP-MND-AA-UA Photoelectric Powerbase 120 VAC 50/60HZ FOR 42LR, # 42LTB5000 Photo Switch Photoelectric Sensor, # 42LRC5000 Banner Engineering, # SM312LVMHS Honeywell Micro Switch, # 982AA1Y-A3N-L CH Pushbutton Dual Black Start Red Stop Standard Duty, # 10250ED412 Circuit Breaker 100 Amp 3 Pole 600 VAC w/lugs, # FAL36100 White Westinghouse Motor Starter 3 Pole 120 Volt Coil Size1 Open, # 6710C49G05 Westinghouse Circuit Breaker 100 Amp 3 Pole 600 VAC, # 1265C95G01 Auxiliary Contact # D Power Cube Rectifier # AW Coil for Contactor # AE Contactor SCR DC Drive 75A 600VDC # RDP Relay 10 Amp. 120 Vac 11 Blade # R Dart Controls DC Drive # 253B50C Strobe-O-Matic Model B Power Unit with Reflector (like new) Strobe-O-Matic Flash Tubes # 5B Strobe-O-Matic Model B Power Unit IDEC Selector Switches 3 Position # ASW3220 Clarostat Potentiometer # 53C-225K Clarostat Potentiometer # 58C-15K Clarostat Potentiometer # 58C1-5K IXYS MCC B Thyristor Module Stancor P-6377 Control Transformer Hurst Model T Motor, 10 RPM, # OMRON Capacitive Proximity Switch 12 to 24 Volt # E2K-X4ME1 OMRON Timer H3CA-8H AETEK International, Contactor Mercury 5 Amp # SP A Punch Rings & & & (Adjustable File Hole Rings) Line Hole Rings Line Hole Rings & (Adjustable File Hole Rings) & DG 28" File Hole Rings 2, 4 & 8 around (New) 2 Pair 17" Schober Long Life Rings for Didde 2 Pair 28" Single & 1 Dual Schober Long Life Rings for Didde Line Hole Punches # P (500 Pieces) Line Hole Dies # SD DIE (250 Pieces) Line Hole Punches # P (500 Pieces) Joslyn Clark Main Contact Kit, Joslyn Clark Main Contact Kit # 5M-58 Joslyn Clark Main Contact Kit # 5M-48 Joslyn Clark Main Contact Kit # 5M-52 Joslyn Clark Main Contact # 5M-065
6 Harmonic Drive HDC-5C-160-2A, # Harmonic Drive HDB , # HUB CITY Gear Box, Model 66, Ratio 1/1 Lovejoy Nylon Sleeve # Baldwin Ink Agitators x 17 1/2" wide Baldwin Ink Agitators x 14" wide Cleveland Variator (used) DG Plate Cylinder # for 17" x 20 1/2" (New) DG Blanket Cylinder # for 17 x 20 1/2" New) DG Anvil Cylinder 22" x 17 1/2" # (Like New, Resurfaced) Plastic Gears # Airmatic Mini-I Valve # Folder #
P34AXL Series Parts List
Note: The first P34AXL low-side ammonia units were shipped in late 1997. The original control panel utilized Cutler-Hammer components, but was changed to Allen Bradley in mid 1999. Control Panel Components
MT3270 & MT3255 SERIES CONVEYOR OVEN REPLACEMENT PARTS LIST
APRIL 1999 MT3270 & MT3255 SERIES CONVEYOR OVEN REPLACEMENT PARTS LIST MT3255 A Division of G.S. Blodgett Corporation Superseding All Previous s Lists. The Company reserves the right to make substitution
ARMOR QUICK LOCATOR GUIDE. Belts , 380 Brake Components Brushes Capacitors Car Signal Components...
QUICK LOCATOR GUIDE Belts.................................................... 366, 380 Brake Components............................................ 380 Brushes......................................................
Fincor Series 2230 MKII/2240
Fincor Series 2230 MKII/ Fincor Series 2200 regenerative drives are ideal for your more demanding applications. They feature flexibility with ratings up to 5 horsepower. The Series 2230 MKII offers new
T O C Car Signal Components Coils Door Equipment Key Switches Safety Edge Equipment Door Operator Equipment GAL Relay Parts Wheels
TOC Car Signal Components Emergency Light Assembly, Push-Button Caps, Position Indicator Inserts........................................ 222 Coils...........................................................
Standard Materials Bodies and covers: copper-free aluminum.
-26 AEB Series: Bolted Combination and Non-Combination Full Voltage Motor Starters: Units Provide Disconnecting Means and Undervoltage, Circuit and Motor Running Protection. Application Combination and
QUICK LOCATOR GUIDE / fax
QUICK LOCATOR GUIDE Belts........................................................ 678 Capacitors................................................... 671 Car Signal Components....................................
QUICK LOCATOR GUIDE. Button Components Key Switches and Keys
QUICK LOCATOR GUIDE Belts........................................................ 474 Brushes...................................................... 476 Capacitor....................................................
Page 2 DS LOW VOLTAGE POWER CIRCUIT BREAKERS Digitrip Trip Unit Inside Wiring Guide Outside Wiring Guide Shutter Drawout Unit Position Indicator Escut
Page 1 Supersedes Renewal Parts Data 33-790-1G pages 1-20 dated December, 1988 Mailed to: C, D, E/33-700 Westinghouse DS and DSL Low Voltage Power Circuit Breakers and Cell Parts Contents Pages DS Breaker
P24FL Series Parts List
Note: The P24F packaged Freon machine was introduced in 1972. Freon-12 was used as the refrigerant until changed to R-22 in 1985. The original control panel utilized Allen-Bradley NEMA components, and
1395 Digital DC Drive Page 5 of 19 Renewal Parts
1395 Digital DC Drive Page 5 of 19 Current Rated (Continued) Series A Drives, 3.6A to 345A, 50/60 Hz, 230, 380, 415 & 460 Volt AC Inputs. 3.6-20- 57-81- Description 19A 56A 80A 110A Per Drive Line Fuse,
MaxPak Plus Analog DC V S Drive
Three-Phase 3-600 HP non-regenerative and 5-150 HP regenerative drives Designed to accommodate a wide range of industrial requirements, the DC V S Drive has been widely applied worldwide. Selected ratings
MODEL JH JACKSHAFT INDUSTRIAL DOOR OPERATOR INSTALLATION MANUAL. OPERATOR SPECIALTY COMPANY, INC. P.O. Box 128 Casnovia, MI 49318
MODEL JH JACKSHAFT INDUSTRIAL DOOR OPERATOR INSTALLATION MANUAL OPERATOR SPECIALTY COMPANY, INC. P.O. Box 128 Casnovia, MI 49318 OSCO requires the use of a reversing edge or photoelectric control for pedestrian
SECTION MOTORS & MOTOR CONTROLLERS
SECTION 15170 MOTORS & MOTOR CONTROLLERS PART 1 GENERAL 1.01 SECTION INCLUDES A. Electric motors. B. Motor controllers for Packaged equipment. 1.02 SUBMITTALS A. Wiring diagrams with electrical characteristics
ICG Switchgear Price List 2009
ICG Switchgear Price List 2009 Section 1 Control Gear Page Contactors (AC,DC & Modular) 2,3 Overload Relays 4 Product Accessories 4,5 Starters-DOL, Star-Delta, Fan/Vibrators, Reversing/Twin 6,7 Section
phone
AS-25-59 Ball AS-035508 Pinion Housing Bearing AS-035515 Bearing AS-036552 Ink Fountain Adjusting Screw AS-051120 Bearing call for details AS-053111 Cam Follower AS-087047 Bearing Hanger Bracket Assembly
TA Ta VA CTRL-XFRMR
3804 South Street 7964-7263, TX Nacogdoches Phone: 936-69-7941 Fax: 936-60-468 TA2437 Ta-2-437 10VA CTRL-XFRMR Acme Electric Catalog Number TA2437 Manufacturer Acme Electric Description Control Transformer,
Punch and Perforating Unit. Spare Parts Manual
Punch and Perforating Unit Spare Parts Manual Another quality product from: Matti Technology AG Wilenstrasse 6 CH-8588 Zihlschlacht / Switzerland Main Number: +41 (71) 422 31 92 Service Number: +41 (71)
phone
AS-25-59 Ball AS-035508 Pinion Housing AS-035512 AS-036552 Ink Fountain Adjusting Screw AS-053111 Cam Follower sliding block fountain AS-085015 AS-087459 Idler Gear AS-1001705 Set Screw AS-1023953 Top
Damper Seal Kit Seal Kit Strainer Seal kit Seal Kit Element
www.westxl.com Sandvik Parts Part No. Description Qty Available 00290840 Gasket 3 00298830 Gasket 5 00641800 Plug pito jaw 2 00668970 Spacer 4 00668980 Shim 2 00669000 Shim 2 00670210 Handle 1 00670370
03TA Series Parts List (P112/HE60)
03TA Series Parts List (P112/HE60) Note: The 03TA (P112F or HE60 Series) began production in 1998 with Cutler-Hammer control panel components. In mid-1999, the control panel was changed to include Allen-Bradley
140P-2674 AND LATER 175P-4023 AND LATER 250P-2783 AND LATER
SERIAL NUMBERS 140P-2674 AND LATER 175P-4023 AND LATER 250P-2783 AND LATER FORM WC5310 3/95 (Rev. 9/97, 6/99, 1/00, 2/00) Systematics, Inc. 1025 Saunders Ln. West Chester, Pa. 19380 TABLE OF CONTENTS VIEW
CABINET REEL OPERATING INSTRUCTIONS
CABINET REEL OPERATING INSTRUCTIONS MODELS 15, 25, 40 & 60 SERIES RAPID-AIR CORPORATION 4601 KISHWAUKEE ST. ROCKFORD, IL 61109-2925 Phone: (815) 397-2578 Fax: (815) 398-3887 Web Site: www.rapidair.com
TRAC-3 TENSION READOUT AND CONTROL
Magnetic Power Systems, Inc. 1626 Manufacturers Drive. Fenton, MO 63026 Tel: 636.343.5550 Fax: 636.326.0608 magpowr@magpowr.com INSTRUCTION MANUAL TRAC-3 READOUT AND CONTROL For Control of Magnetic Particle
A flexible, reliable and affordable drive for 1/4 through 2 HP DC applications
A flexible, reliable and affordable drive for 1/4 through 2 HP DC applications DC2 drives combine application flexibility, compact size and reliability into an affordable adjustable speed package that
Electrical Components
Table of Contents ELECTRICAL COMPONENTS Electrical Components 3 ELECTRICAL COMPONENTS 1 Electrical Cables.... 3-1 - 3-2 Hitch Ball & Grounding Jumpers.... 3-3 Fuses... 3-4 - 3-6 Fuse Packages... 3-7 Cord
NEMA Contactors & Starters (Freedom)
Page 1 February, 1 Supersedes TIP AN1, AN, CN1, CN Pages 1-0, Dated 1/1/4 ECN01, ECN0, ECN0, ECN0, ECN0 AN1, AN, CN1 & CN Sizes 00-, 00V Max. Non-Reversing & Reversing NEMA Type Enclosures 1, R, 4X & 1
Turbo CB Hydraulic Rakes & Auto Rakes Automatic Rake Assembly without Optional Bin Structure and 180 Return Bends
Turbo CB Hydraulic Rakes & Auto Rakes Automatic Rake Assembly without Optional Bin Structure and 180 Return Bends 93 1 Limit Switch 2 Proximity Sensor 3 Pulley Shaft 6 Flag Switch 5 4 Hydraulic Power Unit
Suggested list for the Hydraulic and Pneumatic lab Instruments Mechatronics Engineering Department School of Applied Technical Science
Suggested list for the Hydraulic and Pneumatic lab Instruments Mechatronics Engineering Department School of Applied Technical Science Pneumatic and Electro-pneumatic components: No. EQUIPMENTS operating
NMC Combination Line Starters and Enclosures
NMC Combination Line Starters 600VAC Heavy uty atertight eatherproof Applications: NMC combination magnetic line starters are for use in across-the-line motor starting, motor disconnect, motor and line
Low voltage switch gear
Low voltage switch gear Omron is an established global manufacturer of low voltage switch gear (LVSG) products, and the company s new series (J7) complements the existing portfolio. High power-handling
Illustrated Parts List
Illustrated Parts List. Ordering Parts For your convenience, replacement parts and accessories can be ordered from ARPAC by fax 4 hours a day. Please have the following information available to ensure
EDS / EFS Series Control Stations
EDS / EFS Series Control Stations Fully Assembled EFS and EDS Factory Sealed Devices Cl. I, Div. &, Groups B*, C, D Cl. II, Div., Groups E, F, G Cl. II, Div., Groups F, G NEMA, 7B*CD, 9EFG Applications:
DC3N Non-Regenerative DC Drives
PRICING 1/8-1.0 HP @ 115 VAC, 1-Ph, 50/60 Hz: 90 VDC Armature 1/4-2.0 HP @ 230 VAC, 1-Ph, 50/60 Hz: 180 VDC Armature For the Operation of Permanent Magnet DC Motors Only Product Features: DC3N Plate Model
Quick selector reference guide. Motor Control Center Aftermarket Buckets
Quick selector reference guide Motor Control Center Aftermarket Buckets 2 EATON WWW.EATON.COM/MCCAFTERMARKET Table of contents Series 2100 MCC bucket Motor Control Center (MCC) Aftermarket Buckets Overview
phone
AS-035508 Pinion Housing AS-035511 AS-035512 AS-040502 AS-040504 Locknut sliding block fountain AS-053111 Cam Follower AS-082220 Lockwasher AS-085015 AS-087459 Idler Gear AS-1001705 Nylon Tip Set Screw
Stapler Folder Model 82 Spare Parts List
Stapler Folder Model 82 Spare Parts List Oct 2004 Part No. 76344 Contents TITLE PAGE REVISION Outer view, Infeed 1.1 Oct -04 Outer view, Outfeed 1.3 Jan -03 Front view (cover removed) 1.5 Jan -03 Rear
IMPORTANT: When ordering parts, please provide the model, gas type and serial number of the oven The identification plate is located on the back of th
MG3270 & MG-32 CONVEYOR OVEN REPLACEMENT PARTS LIST EFFECTIVE SEPTEMBER 13, 2001 BLODGETT OVEN COMPANY, 50 Lakeside Avenue, Burlington, Vermont 05401 USA Telephone: (802) 860-3700 (800) 331-5842 Fax: (802)
Martin Unwind Stand Parts and Repair Catalog
Martin Unwind Stand Parts and Repair Catalog Specializing in Martin Roll Stands and Replacement Parts For Over 15 Years P.O. Box 7183 405 1/2 W. Congress St. Sturgis, MI 49091 T: 269-659-0093 F: 269-659-8694
CATALOG OF REPLACEMENT PARTS
CATALOG OF REPLACEMENT PARTS OV300E MINI RACK OVEN ML-132155 OV300E A product of BAXTER MFG. CO., INC. 19220 STATE ROUTE 162 EAST, ORTING, WA 98360 FORM 43051 Rev. C (July 2017) F-43051 Rev. C (July 2017)
Illustrated Parts List
Illustrated Parts List. Ordering Parts For your convenience, replacement parts and accessories can be ordered from ARPAC by fax 24 hours a day. Please have the following information available to ensure
Industrial Control Transformers
6 Industrial Control Transformers Section 6 Industrial Control Transformers provide a low and safe control voltage for the operation of electromagnetic devices, such as motor starters, contactors, solenoids
300% Motor full load amps at 80 seconds, 400% Motor full load amps at 35 seconds
Digital Soft Start Controls Soft Starters & 9 thru 900 s 208-460V 50/60 Hz. 9 thru 900 s 208-575V 50/60 Hz. Farm Duty Applications: Controlled ramp start and stop, minimize spillage in material handling,
1395 Digital DC Drive Renewal Parts
Important Information, Read First 1395 Digital DC Drive Page 1 of 19 The 1395 Product Line has evolved from current rated units to horsepower rated units. Within the range of sizes there are various series
Item Code Description Quantity 3NA LV HRC FUSE LINK S00 80A 690AC 250DC 30 3NA3832 LV HRC FUSE LINK GL/GG S00 125A 500VAC 250VDC 0
Controlgear Products +27 () 11 97 116 sales@controlgear.co.za Siemens stock items on hand as at Mon, 3/4/218, 14:4 GMT+2 3NA3824-6 LV HRC FUSE LINK S 8A 69AC 25DC 3 3NA3832 LV HRC FUSE LINK GL/GG S 125A
Enclosures. See Section Typical Description
January 00 Sheet 1187 Motor Starters & Contactors Low Voltage Enclosures General Individual Enclosed, ac Full Voltage.7- Combination Starters Maximum 00 hp, Volts Application Size 1, NEMA 1, Enclosed Magnetic
F O R M. Installation and Maintenance Manual for FCR Equipped Motors and Gearmotors. 9055E Revised October 2015
Installation and Maintenance Manual for FCR Equipped Motors and Gearmotors Power Transmission Solutions Regal Beloit America, Inc. 7120 New Buffington Road Florence, KY 41042 Application Engineering: 800
E.S.P. Embedded Sensing Probes for Motor Brushes
E.S.P. Embedded Sensing Probes for Motor Brushes 2/13 Installation & Operating Manual MN609 Any trademarks used in this manual are the property of their respective owners. Important: Be sure to check www.baldor.com
PRODUCT DRAWING WIRING DIAGRAM FIELD CONNECTIONS MILLENNIUM MODEL YT CHILLERS (STYLE J) WITH ELECTRO-MECHANICAL STARTER JOB DATA:
Supersedes: 160.55-PW4 (1199) FORM 160.55-PW4 (600) PRODUCT DRAWING YORK INTERNATIONAL CORPORATION P.O. Box 1592, YORK, PA 17405 CONTRACTOR ORDER NO. YORK CONTRACT NO. YORK ORDER NO. WIRING DIAGRAM FIELD
Parts Catalogue SLICING MACHINES. GLOBE FOOD EQUIPMENT COMPANY 2268 N. Moraine Drive Dayton, Ohio 45439
Parts Catalogue Model 00 SLICING MACHINES MODELS: 00, 0,, REV. A IMPORTANT! TO EPEDITE SHIPMENT OF PARTS, ALWAYS SPECIFY MODEL AND PART NUMBER, AND WHEN AVAILABLE, SERIAL NUMBER OF SLICER. GLOBE FOOD EQUIPMENT
3500 Parts Catalog. 1996, A.B.Dick Company P/N (REV.0)
3500 Parts Catalog 1996, A.B.Dick Company P/N 177196 (REV.0) WARNING: THIS PARTS MANUAL IS INTENDED ONLY TO ASSIST QUALIFIED PERSONS IN IDENTIFYING SPECIFIC REPAIR PARTS. THIS PARTS MANUAL IS NOT A SERVICE
HV-20/35 Series Proportioning Unit
"Success through Unity" HV-20/35 Series Proportioning Unit Parts Identification Manual 63942-ID June 30, 2003 Issue 1 GUSMER CORPORATION A Subsidiary of Gusmer Machinery Group, Inc. One Gusmer Drive Lakewood,
UCHIDA STAPLER & PUNCHER SP-22 PARTS LIST
UCHIDA STAPLER & PUNCHER SP-22 PARTS LIST 04/05/06 Screw, nuts, washers, to be used for folders Description of parts (screw,e-ring, spring pin, etc.) illustrated * Orders for screws, washers, etc. should
Wadi Mai Item Description Status UOM Quantity
Wadi Mai Item Description Status UOM Quantity 10281 BEARING New NOS 2.00 10884 SWITCH DIMMER ASSY New NOS 1.00 12451 AIR FILTER New NOS 1.00 12452 FILTER SUCTION New NOS 2.00 12454 V-BELT New NOS 4.00
MAGNETIC MOTOR STARTERS
H A Z m MAGNETIC MOTOR Class I, Div. 1 & 2, Groups B, C, D Class l, Zones 1 & 2, Groups llb, lla Class II, Div. 1 & 2, Groups E, F, G Class III, Div. 1 & 2 ENCL. Type, 4 & 4X - File E8969 Applications
PARTS LIST. Toll Free Phone, (US & Canada): (800) Toll Free Fax, (US & Canada): (800)
1/2 SIZE CONVECTION TJ CINNAMON MCO-E-5 PARTS LIST Toll Free Phone, (US & Canada): (800) 427-6668 Toll Free Fax, (US & Canada): (800) 361-7745 http://www.garland-group.com TJ Cinnamon Oven (Rev 01) Page
MCO HALF SIZE MODELS (electric) MCO-E-5 FROM 2000 AND UP
MCO HALF SIZE MODELS (electric) MCO-E-5 FROM 2000 AND UP Toll Free Phone, (US & Canada): (800) 427-6668 Toll Free Fax, (US & Canada): (800) 36-7745 http://www.garland-group.com FORM # MCO E5 Elec (Rev
4 - Miniature controls
Index -....1.22 Selection Contactors for connection to PLCs, B6S & B7S, 3 phase...6 Contactors, Interface, B6 & B7, 3 phase...5 Contactors, features...1 Contactors, mechanically interlocked, B6 & B7, 3
P24A Series Parts List
Note: The P24A packaged ammonia machine was introduced in 1971. The first models were built with York compressors with direct drive motors. Mycom compressors were used as well as Vilter compressors over
1VAL2401-SG Rev D. Spare parts list for Outdoor Products Reclosers, breakers, & padmount switches
1VAL2401-SG Rev D Spare parts list for Outdoor Products Reclosers, breakers, & padmount switches Reclosers GridShield recloser 12A00736H05 Actuator assist capacitor Single-phase upgrade 15 KV, 800 A, 12.5
Basics of Control Components
Basics of Control Components Table of Contents Introduction...2 Electrical Symbols...6 Line Diagrams...16 Overload Protection...22 Overload Relays...26 Manual Control...35 Magnetic Contactors and Starters...41
48 Series - Contactor Relay 4PST - N.O. - Double Make, 15 Amp
48 Series - Contactor Relay 4PST - N.O. - Double Make, 15 Amp E13224 The 48 series is a contactor with a 4 normally open, double make contacts rated up to 3HP. It uses a solenoid type moving core design
SECTION 3. PARTS INFORMATION
/592 SECTION 3. PARTS INFORMATION 3-1. INTRODUCTION This section lists the replaceable parts of the Henny Penny Model 590 fryer. 3-2. GENUINE PARTS Use only genuine Henny Penny parts in your fryer. Using
Tension Control Systems
Technical Considerations Tension Zones I. tension zone in a web processing machine is defined as that area between which the web is captured, or isolated. Virtually any machine can be broken down into
DENVER PUBLIC SCHOOLS DESIGN AND CONSTRUCTION STANDARDS This Standard is for guidance only. SECTION MOTORS, STARTERS & DRIVES
PART 0 DESIGN STANDARDS 0.01 GENERAL DESIGN GUIDELINES A. Coordinate starter needs for mechanical equipment prior to 50% CD and confirm again for 100% CD submittal. B. Coordinate temperature controls requirements
Applications: Conveyors, machine tools and other applications requiring adjustable speed. Mult. Sym.
HVAC Farm Duty Fractional Horsepower DC Speed Controls for PMDC DC & Controls 1/15 thru 1/4 115 VAC Single Phase 50/60 Hz. Applications: Conveyors, machine tools and other applications requiring adjustable
3. Coils shall be of molded construction
.7-4 Motor Starters & Contactors Low Voltage Enclosures General Non-Combination Starters January 00 Sheet 8 0 7 8 9 4 Non-Combination Starters Maximum hp, Volts Typical Non-Combination Starter Application
MB-825 Flange Mounted
Motor Brake Normal Duty MB-825 Flange Mounted 1/4-20 UNC-3B (4) on 10.50 dia. 5/16-18 UNC-3B (8) holes equally spaced on 8.85 dia.* 2.68 4.359 1/2-13 UNC-2A (4) on.250 dia.* 10.50 10.50 10.000.156.062
ASTRO ATS-9900 TABBER, LABELER, AND STAMP AFFIXER. Parts Manual
ASTRO ATS-9900 TABBER, LABELER, AND STAMP AFFIXER Parts Manual This manual is intended solely for the use and information of Astro Machine Corp. its designated agents, customers, and their employees. The
300% Motor full load amps at 80 seconds, 400% Motor full load amps at 35 seconds
Digital Soft Start Controls 9 thru 900 Amps 208-460V 50/60 Hz. 9 thru 900 Amps 208-575V 50/60 Hz. Applications: Controlled ramp start and stop, minimize spillage in material handling, reduced water hammer
For Options, Modifications and Accessories, see pages Discount Schedule A6
Main and Feeder Units Bulletin 191F and 191M Outgoing Feeder Lug Compartment (FLUG) and Incoming Main Lug Compartment (MLUG)................................................. The Bulletin 191M and 191F
2500/2700 Series Gas Convection Oven
MARKET FORGE 2500/2700 Series Gas Convection Oven 2500/2700 Series Gas Convection Oven 2500 2700 2592 2792 Control Panel Assembly 1 99-4209 Control Panel Assembly Complete (Excluding Thermostat) 2 10-6307
The Z Series. SCR Power controllers for resistance heating applications. Zero-Fired SCR Power Controllers AMPS VAC
The Z Series Zero-Fired SCR Power Controllers 60-1200 AMPS 120-600 VAC SCR Power controllers for resistance heating applications. ROBICON 1996 Rev. 7/96 Applications Robicon s Z series power controls are
MODELS CMA-180/180TALL Including 480V MACHINES PARTS MANUAL Rev 2.08A
MODELS CMA-180/180TALL Including 480V MACHINES PARTS MANUAL Rev 2.08A C M A D I S H M A C H I N E S 1 2 7 0 0 K N O T T A V E N U E GARDEN GROVE, CALIFORNIA 92841 800-8 5 4-6 4 1 7 FAX 714-895-2141 www.cmadishmachines.com
Lectures 16 Motor Controls & Drives (Part II)
ECE 211 Lectures Page 1 Lectures 16 Motor Controls & Drives (Part II) Friday, August 01, 2014 8:30 AM AC Motors and Control Circuits Example 6: 1Φ 1/4 HP, 115V, Split-Phase Induction Motor - Magnetic Switch
CATALOG OF REPLACEMENT PARTS
CATALOG OF REPLACEMENT PARTS HL400 LEGACY MIXER HL400 HL400C ML-134348 ML-134359 A product of HOBART 701 S. RIDGE AVENUE TROY, OHIO 45374-0001 FORM 43137 (June 2007) - 2 - HOBART Table Of Contents 5 CONTROL
POWER AMPLIFIER SERVICE MANUAL CONTENTS
POWER AMPLIFIER CONTENTS Performance Specifications... 2 Notes... 2 Rear Panel... 3 Section Location... 3 Block Diagram... 4 Interconnection Diagram... 5-8 Multi-channel Schematic and PCB... 9 Heatsink
IMPORTANT: When ordering parts, please provide the model, gas type and serial number of the oven The identification plate is located on the left side
MT3870 & MT3855G SERIES CONVEYOR OVEN REPLACEMENT PARTS LIST EFFECTIVE SEPTEMBER 6, 2001 BLODGETT OVEN COMPANY, 50 Lakeside Avenue, Burlington, Vermont 05401 USA Telephone: (802) 860-3700 (800) 331-5842
Instructions for A200, A210, A250 size 6, two- or three-pole non-reversing or reversing motor controllers
Instruction Leaflet IL0330300E Supersedes I.L. 7055C, Pages 8, Dated June 998 Instructions for A00, A0, A50 size 6, two- or three-pole non-reversing or reversing motor controllers Contents Description
Westinghouse Breakers. Westinghouse 225A 600VAC 2P Circuit Breaker JB2225W (refurbished)
Westinghouse Breakers American International Marketing P.O. Box 9133 Portland OR 97291-033 Closeout #1282-Westinghouse-Breakers Westinghouse EB3015 Circuit Breaker EB, 15 Amp, 3 Pole, 240 Volt, Molded(USED)
ICA Manufacturing Catalog. Your One Stop Metal Shop. Table of Contents. Visit us at:
ICA Manufacturing Your One Stop Metal Shop At ICA Manufacturing, you will find high-quality creations and wholesale parts at a budget price. From Aluminum Cabinetry, to Transformers, to Capacitors, we
Parts Manual. with Wiring Diagrams for domestic ovens PS870 WOW SERIES GAS FIRED: Table of Contents: Page 2.
A MIDDLEBY COMPANY PS870 WOW SERIES GAS FIRED: SPL062506-PF-BD June 25, 2006 Parts Manual with Wiring Diagrams for domestic ovens Serial # Code First 4 digits - order of production Fifth digit - model
Protectors. 35mm DIN rail snap-on mounting. Wide range of accessories
Manual motor protectors Manual motor protectors Manual motor Protectors MS116 MS32 MS4X MS49X Description Type MS116 Suitable for use with 3-phase motors up to 10 HP @ 480V UL Listed and CSA certified
362 Umbilo Road, Durban 4001, P.O Box 17211, Congella 4013, Tel: /8, Fax: Website:
CONTACTORS: M SERIES G002 MC1A-310-AT5 230VAC 1NO R 305.00 G002/1 MC1A-310-AT1 24VAC 1NO R 305.00 G002/3 MC1A-310-AT3 110VAC 1NO R 305.00 G002/9 MC1A-310-AT9 48VAC 1NO R 305.00 G002/U MC1A-310-AT12 380VAC
Tel/Fax: Replacement parts for : MULTI 1210, 1250OS, 1250W, 1250N, 1250DOM.
Replacement parts for : MULTI 1210, 1250OS, 1250W, 1250N, 1250DOM., 1215CD, VARIABLE SPEED PULLEY 1250 O.S. - 1/2 Shaft P-1629 1250 N.S. - 5/8 Shaft P-1649 V-BELTS 35 Motor to printing head P-4904 33 Pump
NR2 Thermal Overload Relay. 1. General. 2. Type Designation. 3. Features. Relays. EU Germany Ukrain Russia South Africa USA
R Relays C US LISTED EU Germany Ukrain Russia South Africa USA NR Thermal Overload Relay. General. Certificates: CE, VDE, Ukrain, PCT, RCC, UL;. Electric ratings: AC 50/0Hz, 90V, 0.A~30A;.3 Tripping class:
MD10. Engine Controller. Installation and User Manual for the MD10 Engine Controller. Full Version
MD10 Engine Controller Installation and User Manual for the MD10 Engine Controller. Full Version File: MartinMD10rev1.4.doc May 16, 2002 2 READ MANUAL BEFORE INSTALLING UNIT Receipt of shipment and warranty
1/6 through 5 HP Adjustable Speed, DC Motor Controllers
1/6 through 5 HP Adjustable Speed, DC Motor Controllers 1/6-5 HP 115 or 230 V, Single Phase - Reconnectable Four Quadrant Regenerative Selectable Deadband AC Line Starting DC Tachometer Feedback Run Contact
1/4HP - 7.5HP 120/240/277 VOLTS 50/60HZ
Installation & Operating Procedures DG2 Series SINGLE PHASE CONVERTERS 1/4HP - 7.5HP 120/240/277 VOLTS 50/60HZ TABLE OF CONTENTS 1.0 DESCRIPTION... Pg. 1 2.0 INSTALLATION AND START-UP... Pg. 3 3.0 DRAWING
All parts by part number
www.westxl.com All parts by part number Part No. Description Qty Available 000000000673 Hose Clamp 1 0000160421 Seal 2 0011531720 Sensor 1 002111841000 Spring Dana see 04697675 00290840 Gasket 3 00298830
Commercial Garage Door & Gate Operators
Commercial Garage Door & Gate Operators Approved to UL Standard 325 Industrial Electronic Door Control LYNX 6000 2 1. Electronic Control Provides unmatched ruggedness that incorporates the newest features
MCS-203 Dancer Control
lectric rakes Tel: (O11) 4222-5040 ax: (011) 4201-2478. System eatures ull roll to core control Consistent tension, even during flying splices, rapid starts and emergency stops liminates web flutter to
15 Recommended Spare Parts
15.1 QUANTUM III SPARE PARTS KITS Control Techniques offers a Spares Kit A and Kit B for each Quantum III model. They represent a significant savings over purchasing the items separately. Kit A will be
MK IV OVERHEAD DOOR REPLACEMENT PARTS BOOK
MK IV OVERHEAD DOOR REPLACEMENT PARTS BOOK JAMISON DOOR COMPANY P.O. BOX 70 HAGERSTOWN, MARYLAND 21740 1-800-532-3667 301-733-3100 INTERNET: http://www.jamisondoor.com E-MAIL: contact@jamisondoor.com ECN
Partnership that you can trust. LV Switchgear Motor Control Products.
s Partnership that you can trust LV Switchgear Motor Control Products Maximum etail Price w.e.f. st October, 204 www.siemens.co.in s SIMOCODE pro S Get your motor control center s intelligent and compact
Coil Data Nominal Current MA Nominal VA Sealed. Coil Data Nominal Current MA Nominal VA Sealed. Single Pole Double Throw (SPDT)
14/03/08 A136 Relay - General Purpose 90-293Q Enclosed fan relays used for switching single or two speed fan motors, solenoids, relays, resistive loads, heating and cooling applications and general purpose
Type SOQ Negative Sequence Time Overcurrent Relay
ABB Power T&D Company Inc. Power Automation & Protection Division Coral Springs, FL Allentown, PA April 1998 Supersedes DB dated August 1991 Mailed to: E,D, C/41-100B For Protection of Rotating Machinery
MARK V SERIES ELECTRIC CONVECTION OVENS REPLACEMENT PARTS LIST
MARK V SERIES ELECTRIC CONVECTION OVENS REPLACEMENT PARTS LIST EFFECTIVE JANUARY 12, 2012 Superseding All Previous Parts Lists. The Company reserves the right to make substitution in the event that items
MCS-203 Dancer Control
lectric rakes System eatures n ull roll to core control n Consistent tension, even during flying splices, rapid starts and emergency stops n liminates web flutter to allow better registration control n
Key Switches and Keys Emergency Stop Switch Pushbutton Assemblies
PAYNE / O. THOMPSON QUICK LOCATOR GUIDE Belts........................................................ 596 Car Signal Components........................................ 592 Key Switches and Keys.................................................