ELECTRICAL SOLUTIONS. Pan-Way Type LD2P10 Multi-Channel Surface Raceway System. Multi-Channel Fittings for LD2P10 C2.75

Transcription

1 Pan-Way Type LD2P Multi-Channel Routes power and data together One-piece hinged design allows cables to be laid in Tamper resistant Terminates using JBP1D, JBP2D, JBP2FS or JBP2S surface mount outlet box solutions Ties Left Internal Area =.43 Sq. In. Right Internal Area =.50 Sq. In. LD2PIW8-A Two channel tamper resistant one-piece latching surface raceway. Supplied with 1.52" x pre-applied.86" LD2PIW-A Available in 8' and ' lengths. (39.0mm x mm) LD2P raceway requires screw mounting if it is being used for power cabling applications. For other colors replace IW ( ) with EI (Electric Ivory), IG (International Gray), or WH (). CFX Multi-Channel Fittings for LD2P Multi-channel fittings for LD2P are designed to maintain the TIA/EIA-568-B and 569-B required minimum bend radius for high performance copper and fiber optic cabling systems RAFX Color CFXIW-X Coupler fitting for use with LD, LDPH, and LD2P raceway. Pkg. ICFX TFXD OCFX ECFX RAFXIW-X Right angle fitting for use with LDPH and LD2P raceway. ICFXIW-X Inside corner fitting for use with LDPH and LD2P raceway. OCFXIW-X Outside corner fitting for use with LDPH and LD2P raceway. TFXDIW-X Tee fitting with divided insert to maintain separation of power and data cabling. For use with LD2P raceway. ECFXIW-X End cap fitting for use with LDPH and LD2P raceway. EEFX EEFXIW Entrance end fitting for LD2P raceway. Breakouts for 1/2" and 3/4" diameter conduit. For other colors replace IW ( ) with EI (Electric Ivory), IG (International Gray), or WH (). 1 For technical assistance in the U.S., call (outside the U.S., see inside back cover for directory) Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA Main ice: (650) Outside Local Area: (800)

2 Ties Pan-Way LD For routing data and low voltage cabling One-piece hinged design allows cables to be laid in FT4 rated Panduit Mini-Com Mount Boxes LD3 LD5 LD LD3 Internal Area =.21 Sq. In. LD5 Internal Area =.38 Sq. In. LD Internal Area = 1.00 Sq. In. LD3 LD3IW6-A One-piece latching surface raceway. Supplied with pre-applied Available in 6', 8', and ' lengths. LD3IW8-A.77" x.46" (20.0mm x 12.0mm) LD3IW-A 200 LD5 LD5IW6-A One-piece latching surface raceway. Supplied with pre-applied Available in 6', 8', and ' lengths. LD5IW8-A 1.01" x.58" 15.0mm) LD5IW-A 200 LD LDIW6-A One-piece latching surface raceway. Supplied with pre-applied Available in 6', 8', and ' lengths. LDIW8-A 1.51" x.94" (38.4mm x 24.0mm) LDIW-A 200 For other colors replace IW ( ) with EI (Electric Ivory), IG (International Gray), or WH (). 76 Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA Main ice: (650) Outside Local Area: (800)

3 Pan-Way LDPH Two-piece hinged design allows cables to be laid in Tamper resistant.75".41" LDPH3 Internal Area =.17 Sq. In. Panduit Mini-Com Mount Boxes 1.02".55" LDPH5 Internal Area =.33 Sq. In LDPH Internal Area =.89 Sq. In..86 Ties LDPH3 LDPH5 LDPH LDPH3 LDPH3IW8-A Tamper resistant one-piece latching.75" x.41" Available in 8' and ' lengths. (20.0mm x LDPH3IW-A 200.4mm) LDPH5 LDPH5IW8-A Tamper resistant one-piece latching 1.02" x.55" Available in 8' and ' lengths. LDPH5IW-A mm) LDPH LDPHIW8-A Tamper resistant two-piece latching 1.52" x.86" Available in 8' and ' lengths. (39.0mm x LDPHIW-A mm) LDPH raceway requires screw mounting for power cabling applications. For other colors replace IW ( ) with EI (Electric Ivory), IG (International Gray), or WH (). For technical assistance in the U.S., call (outside the U.S., see inside back cover for directory) Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA Main ice: (650) Outside Local Area: (800)

4 Pan-Way LDS Ties Tamper resistant non-hinged design Type LDS is the only non-metallic raceway that is bendable in low voltage applications to route around and over obstructions LDS raceway requires screw mounting using the LMD mounting straps for power cabling installations Panduit Mini-Com Mount Boxes LDS3 Internal Area =.21 Sq. In. LDS5 Internal Area =.38 Sq. In. LDS3 LDS5 LMD3 LMD5 LDS3 LDS3IW-A Tamper resistant one-piece surface.77" x.41" raceway. Supplied with pre-applied (20.0mm x Available in.4mm) ' lengths. LDS5 LDS5IW-A Tamper resistant one-piece surface raceway. Supplied with pre-applied Available in ' lengths. 1.01" x.55" 14.0mm) Mounting Straps LMD3IW-Q For use with LDS3 raceway. Size 3 LMD5IW-Q For use with LDS5 raceway. Size 5 For other colors replace IW ( ) with EI (Electric Ivory), IG (International Gray), or WH () Method for Bending Type LDS (Low Voltage Applications) 1) Slide 18" to 30" section of LDS into PVC pipe heating blanket. *(Recommended blanket designed for bending 1/2" to 1 1/2" PVC conduit.) *Heating blanket not offered by Panduit. 2) Allow section to heat approximately 2 3 minutes. will be soft and pliable, but should not stretch. (Time will vary with blanket temperature and raceway size.) 3) Remove raceway section from blanket and hold in desired position until the raceway cools. Install mounting straps immediately. 78 Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA Main ice: (650) Outside Local Area: (800)

5 Ties Adapters for LD Fit into universal breakout of DCEFX or RAEFX fittings For use with types LD3, LDPH3, LDS3, LD5, LDPH5 and LDS5 raceway CA3 CA5 Color CA3IW-X Adapter fits into universal breakout of DCEFX or RAEFX fittings. For use LD3, LDPH3, and LDS3 raceway. CA5IW-X Adapter fits into universal breakout of DCEFX or RAEFX fittings. For use LD5, LDPH5, and LDS5 raceway. For other colors replace IW ( ) with EI (Electric Ivory), IG (International Gray), or WH (). Pkg Fill Capacities for LD Profile This information is to be used as a guide in selecting the proper size raceway. The maximum amounts may vary according to the cable installation methods, straightness of cables, etc. LD3 LD5 LD LDPH3 LDPH5 LDPH LD2P Left LDP2 Right LDS3 LDS5.21 in in in in in in in in in in. 2 SPEC = 40% cable fill The recommended design in cable capacity, leaves room for future moves, adds, and changes. Type and Configuration Fill Area (In.²) AWG dimensions represent typical outer cable diameter in inches. MAX for Data = 60% cable fill The maximum cable quantity based on cable interweaving and packing factors. MAX for cable fill The maximum of electrical cables based on UL temperature rise test. Electrical s Data Grade s Data Grade s Audio/Video Fiber Optic 14 AWG 12 AWG AWG 23/24 AWG/UTP 23 AWG/UTP CM RG6 2 Strand THHN/T90 Category 6 (4-pr.) Augmented Category Dia. = Dia. = Dia. = Dia. = FILL FILL FILL FILL FILL MAX MAX MAX SPEC MAX SPEC MAX SPEC MAX SPEC MAX (UL Temp Rise Test) (40%) (60%) (40%) (60%) (40%) (60%) (40%) (60%) LD LD LD LDPH LDPH LDPH LD2P Left channel LD2P Right channel LDS LDS Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA Main ice: (650) Outside Local Area: (800)