TeSys GV2 - GV3 Manual Starters and Protectors

Transcription

1 TeSys GV GV Manual Starters and Protectors A stronger, longterm connection Courtesy of Steven Engineering, Inc. 0 Ryan Way, South San Francisco, CA General Inquiries: (800)

2 Simply Smart More ingenuity and intelligence for continually improving ease of use. GV P the new manual starter and protector Renowned for extensive experience in the development of motor starter solutions, Telemecanique introduces a new line of 9 A to 6 A manual starters. Ingenuity and simplicity are the key words of this new range: thanks to its new power terminals, the new range of GV P assures improved reliability of connections over time. is designed to maintain a constant tightening force on the wire and assures a strong, safe and long lasting connection in the most demanding environments An enhanced and high performance offer Control and protection of motors from 9 A to 6 A. UL 08 Type E and IEC 947 certification (GV P). Optional ring terminal connectors. This product is manufactured in conformity with the requirements of the RoHS (Restriction of Hazardous Substances) European Directive. Increased security and protection High breaking capacity: 6 ka@480/77 wye VAC + ka@600/47 wye VAC. position, padlockable, rotary knob. Trip test button on front face. Lockable thermal adjustment settings. Flexible and versatile design Flexibility using addon blocks and front addon blocks that are common throughout the 0 to 6 A GVGV range. More compact, only mm wide. Simple and secure terminal tightening using a 4 mm or / inch Allen key. Easier installation on DIN rail thanks to a metal locking mechanism. Clean wiring and space saving thanks to wire channel for control cable connection. Courtesy of Steven Engineering, Inc. 0 Ryan Way, South San Francisco, CA General Inquiries: (800)

3 : a strong, long lasting power connection, the new patented terminal technology, assures a long lasting tightening quality of the wire conductors. Even in the event of conductor migration*, the connection force on the wire is assured due to the spring effect of the power connectors. The advantages of the connection are: Reduced maintenance time, due to constant pressure being applied to the wire. Secure connections, provided by the screw and the 4 mm Allen key which enables a high tightening torque ( pounds per inch) Fingersafe construction provides IP0 protection against accidental contact. *Migration: deformation of the copper conductors over time leading to loss of tightness Long lasting connection quality A Schneider Electric patented technology Possible to connect two wires of different sizes. Maintaining of a tight wire connection is assured by pressure of spring and crimping of conductor on the contact plate. The spring compensates for wire strand migration. A secure connection is assured. Courtesy of Steven Engineering, Inc. 0 Ryan Way, South San Francisco, CA General Inquiries: (800)

4 Telemecanique manual starters and protectors TeSys GV /GV GV ME GV P Push button control (GV ME), rotary knob control (GV P) ratings (Ø) ratings (Ø) V 0 V 00 V 0 V 460 V 7 V Setting range of thermal trips (A) Group motor applications (Max. Fuse or circuit breaker) Manual starter and protector with screw terminals Manual starter and protector with spring terminals Manual starter and protector with ring terminals 0..6 GVME0 GV P GVME0 GV P0 For spring terminals add to the catalog number, for example, GVME0. GVME is not available with spring terminals GVME0 GV P GVME04 GV P04 Toggle operator ratings (Ø) ratings (Ø) V 0 V 00 V 0 V 460 V 7 V Setting range of thermal trips (A) Manual starter and protector with screw terminals 0 GV7RE0 GV7RS GV7RE GV7RS GV7RE40 GV7RS GV7RE0 GV7RS0 Courtesy of Steven Engineering, Inc. 0 Ryan Way, South San Francisco, CA General Inquiries: (800)

5 GV P NEW ratings (Ø) ratings (Ø) V 0 V 00 V 0 V 460 V 7 V Setting range of thermal trips (A) Group motor applications (Max. Fuse or circuit breaker per NEC 40) Manual starter and protector with screw terminals Manual starter and protector with spring terminals Manual starter and protector with ring terminals Rotary knob control GV P GVME0 GV P GVME06 GV P GVME07 GV P GVME08 GV P GVME GV P GVME4 GV P4 GVME to GVP cross reference table GVME GVME06 GVME07 GVME08 GVME GVME4 GVME0 GVME0 GVME GVME40 GVME40 GVME6 GVME6 Ratings.6 A.6. A. 4 A 4 6 A 6 A 6 A 6 A 6 A 40 A 40 A 40 6 A 40 6 A GVP GVP06 GVP GVP GVP GVP GVP GVP GVP GVP GVP GVP GVP Ratings.6 A.6. A. 4 A 4 6 A 6 A 6 A 6 A 6 A 40 A 40 A 40 6 A 40 6 A GV7RE80 GV7RS GV7RE0 GV7RS GV7RE0 GV7RS GV7RE0 GV7RS0 Courtesy of Steven Engineering, Inc. 0 Ryan Way, South San Francisco, CA General Inquiries: (800)

6 GV P GV P GV P GV P GV P GV P GVME6 GV P GVME0 GV P GVME GV P GVME GV P GVME Courtesy of Steven Engineering, Inc. 0 Ryan Way, South San Francisco, CA General Inquiries: (800)

7 Addon blocks common to TeSys GVGV CONTACT BLOCKS Instantaneous auxiliary contacts Mounting position Lefthand side Front N/O or N/C GVAE () For spring terminal version add to the end of the reference, example: GVAN becomes GVAN N/O + N/C GVAN () GVAE () N/O + N/O GVAN0 () GVAE0 () Fault contact + instantaneous auxiliary contact Mounting position Lefthand side N/O (fault) + N/C GVAD0 N/O (fault) + N/O GVAD N/C (fault) + N/C GVAD0 N/C (fault) + N/O GVAD0 Shortcircuit signalling contact Mounting position Lefthand side C/O with form C contact GVAM ELECTRIC TRIPS Type of trip Mounting position Righthand side Voltage 4 V 48 V 0 V 0 0 V V 0 7 V 7 V 00 V 00 0 V 0 40 V V V 4 V Undervoltage trip 0 Hz GVAU0 GVAU0 GVAU7 GVAU GVAU GVAU07 GVAU GVAU8 GVAU4 60 Hz GVAU06 GVAU06 GVAU7 GVAU6 GVAU GVAU07 GVAU6 GVAU86 GVAU46 Shunt trip 0 Hz GVAS0 GVAS0 GVAS7 GVAS GVAS GVAS07 GVAS GVAS8 GVAS4 60 Hz GVAS06 GVAS06 GVAS7 GVAS6 GVAS GVAS07 GVAS6 GVAS86 GVAS46 PADLOCKING DEVICE For up to 4 padlocks GVME/P GV P (not included) Ø 6 mm shank max. GVV0 TeSys GV addon blocks and accessories COMBINATION BLOCKS For mounting on contactors SET OF POLE 6 A BUSBARS Number of combined circuitbreakers Bus bar spacing () 4 mm centers 4 mm 7 mm () Protective end cover for unused busbar outlets, reference: GVG LCK or LPK GVAF0 GVG4 GVG4 GVG7 LCD09 D8 GVAF GVG4 GVG4 LAD AND LCD09 D8 GVAF4 4 GVG44 GVG44 GVG47 GVG4 GVG4 TERMINAL BLOCKS For supply to one or more busbar sets Connection from the top GVG09 For current limiter GVL GVG0 PADLOCKABLE EXTERNAL OPERATOR Colour of operator GV P Padlocking In ON and OFF position In OFF position Black handle/blue legend plate GVAP0 Red handle/yellow legend plate GVAP0 TeSys GV addon blocks and accessories CONTACT BLOCKS Fault contact + instantaneous auxiliary contact Mounting position Front N/O (fault) + N/C GVAED0 () () For spring terminal version add to the end of the reference, example: GVAED0 becomes GVAED0 N/O (fault) + N/O GVAED () SET OF POLE A BUSBARS Number of combined manual starters and protectors Bus bar spacing 64 mm centers GVG64 TERMINAL BLOCKS Type of terminals GV P Line side insulator for UL 08 E applications GVG66 IP0 cover for lug type terminals LAD9670 Courtesy of Steven Engineering, Inc. 0 Ryan Way, South San Francisco, CA General Inquiries: (800)

8 The efficiency of Telemecanique branded solutions When combined, Telemecanique products offer quality solutions for all Automation and Control functions of your applications. Operator interface Software tools Motion and Drives Systems and architectures Interfaces and I/O Automation Motor control Detection Power supplies A worldwide presence Schneider Electric is a global supplier of electrical distribution, automation and control equipment products under the brand names of Square D, Telemecanique and Merlin Gerin. Backed by a global organization of 90,000 employees in 90 countries, Schneider Electric is a global electrical industry leader. With one of the strongest distribution networks in the U.S. and around the world, you can count on Schneider Electric to keep your business running smoothly and efficiently. Technical assistance wherever you are Our technicians are available to assist you in finding the optimum solution for your needs. Schneider Electric provides you with all necessary technical assistance, throughout the world. Schneider Electric North American Operating Division 4 S. Roselle Road Palatine, IL Tel: Fax: Simply Smart! 007 Schneider Electric. All rights reserved. Document Number 80BR070 Courtesy of Steven Engineering, Inc. 0 Ryan Way, South San Francisco, CA General Inquiries: (800) tk