Lead YRXU (I FLHQF\ With TeSys

Transcription

1 Lead Y With TeSys

2 Control Relays - K model (AC & DC Control) Conformity to International Standards IEC, UL, CSA Inbuilt 4 auxiliary contacts 10A thermal rating, AC/DC and DC low consumption coils available No of Poles 2NO + 2NC AC Control CA2KN22* DC Control CA3KN22** DC low consumption Unit (1) (2) (3) CA4KN22*** 3NO + 1NC CA2KN31* 1005 CA3KN31** 1300 CA4KN31*** 4NO + 0NC CA2KN40* CA3KN40** CA4KN40*** MRP 1515 (1) Compatible with PLC outputs (3) 2 pole auxiliary contact block can be mounted additionally Power Contactors - K model (3 Pole AC & DC Control) Conformity to International Standards IEC, UL, CSA Power contactors from 6 to 16 Amps in AC-3 duty, AC/DC coils 1NO or 1NC inbuilt auxiliary contact [Ie] Rated Operational Current (A) Motor Power (kw) Reversing Contactors - K model Auxiliary Contacts AC Control DC Control 1 NC LC1K0601* LP1K0601** NO LC1K0610* LP1K0610** 1 NC LC1K0901* LP1K0901** NO LC1K0910* LP1K0910** 1 NC LC1K1201* LP1K1201** NO LC1K1210* LP1K1210** Conformity to International Standards IEC, UL, CSA Reversing contactors from 6 to 16 Amps in AC-3 duty, 3 pole versions AC/DC coils 1NO or 1NC inbuilt auxiliary contact 1 NC LC1K1601* NO LC1K1610* [Ie] Rated Operational Current (A) Coil Voltage Code Motor Power (kw) Auxiliary Contacts AC Control 1 NC LC2K0601* 1 NO LC2K0610* 1 NC LC2K0901* 1 NO LC2K0910* 1 NC LC2K1201* 1 NO LC2K1210* 1 NC LC2K1601* 1 NO LC2K1610* Type Voltage AC* CA2KN, LC1-K06 to K16, 50/60Hz B7 - - F7 M7 N7 LC2-K06 to K16, 50/60Hz F7 M7 N7 DC** CA3KN, LP1-K06 to K12 BD - - FD MD - DC low consumption*** CA4KN BW3 EW3 SW Note: For ordering contactors with other coil voltages & frequencies, please add ` 135/- to the unit MRP of the standard contactor of the same rating

3 Accessories - K Model Contacts Add On Blocks Control Relays/Contactors Auxiliary contact block TeSys 0 NO + 2 NC LA1KN02 1 NO + 1 NC LA1KN11 2 NO + 0 NC LA1KN20 0 NO + 4 NC LA1KN04 1 NO + 3 NC LA1KN13 2 NO + 2 NC LA1KN22 3 NO + 1 NC LA1KN31 4 NO + 0 NC LA1KN On Delay Electronic timers V AC/DC, s LA2KT2E (1) 1310 On Delay Electronic timers V AC, s LA2KT2UA (1) Suppressor module - RC circuit V AC Suppressor module - varistor V AC/DC Suppressor module - varistor V AC/DC * Lot Size 5 (1) Front mounted with common point changeover contact. LA4KA1U* LA4KE1UG* LA4KE1FC* 480 Thermal Overload Relays - LR2-K Model (Direct Mounting) Conformity to International Standards IEC, UL, CSA Range available - upto 0.1A to 16A Direct mounting on contactors is possible upto 16A Thermal Protection Adjustment Range A For Use With * LR2K A LR2K A LR2K A LR2K A LR2K A LR2K A LR2K0307 LC1K, LP1K, LP4K, LP2K, LC2K A LR2K A LR2K A LR2K A LR2K A LR2K A LR2K A LR2K0322 * Note: Terminal Block for Clip-on Mounting LA7-K0064 ` 445/

4 TeSys D Control Relays Conformity to International standards - IEC, UL, CSA, CE Up to 5 inbuilt auxiliary contacts High temperature limits. No of Poles AC Control DC Control (2) 3NO+2NC CAD32* CAD32** CAD32*** NO+0NC CAD50* CAD50** CAD50*** (1) Compatible with PLC outputs (3) 2 pole auxiliary contact block can be mounted additionally DC low consumption Unit (1) (2) (3) MRP 1790 Power Contactors - D Model (3 Pole AC & DC Control) Conformity to International Standards IEC, UL, CSA, CE Amps, 3 and 4 pole versions, AC/DC coils High temperature limits Different levels of power and control contacts Inbuilt 1 NO + 1 NC auxiliary contacts High electrical life Fuse-less Type 2 Coordination Charts available [Ie] Rated Operational Current AC1 DC Low Consumption Contactors (3 Pole) [Ie] Rated Operational Current AC1 For ordering contactors with other coil voltages & frequencies, please add ` 135/- to the unit MRP of the Standard Contactor for the same rating. For additional auxiliary block, timers & other accessories, please see page 57 and page AC3 Duty (Long Life) AC3 Duty (Normal Life) Auxiliary kw hp A kw hp A Contacts Motor Power (Long Life) AC3 kw hp A Motor Power (Normal Life) AC3 KW hp A AC Control Auxiliary Contacts DC Control (1) NO + 1 NC LC1D09* 975 LC1D09** NO + 1 NC LC1D12* 1085 LC1D12** NO + 1 NC LC1D18* 1235 LC1D18** NO + 1 NC LC1D25* 1540 LC1D25** NO + 1 NC LC1D32* 3195 LC1D32** NO + 1 NC LC1D38* 4840 LC1D38** NO + 1 NC LC1D40A* 5230 LC1D40A** NO + 1 NC LC1D50A* 6090 LC1D50A** NO + 1 NC LC1D65A* 8440 LC1D65A** NO + 1 NC LC1D80* LC1D80** NO + 1 NC LC1D95* LC1D95** NO + 1 NC LC1D1156* LC1D1156** NO + 1 NC LC1D1506* LC1D1506** NO + 1 NC LC1D09**** NO + 1 NC LC1D12**** NO + 1 NC LC1D18**** NO + 1 NC LC1D25**** NO + 1 NC LC1D32**** 6665 Coil Voltage Code Type Voltage AC* CAD, LC1-D09..to D38, D40A, 50A,65A & D150 50/60Hz B7 - - F7 M7 N7 LC1-D80..to D95 & D115 50Hz B5 - - F5 M5 N5 DC** LC1-D09..to D38, D40A, 50A, 65A, 80, 95, 115 & D150 BD - - FD MD - DC Low Consumption*** CAD BL - - FL ML - DC Low Consumption**** LC1D09...D32 BL EL SL - - -

5 Power Contactors - D Model (4 Pole AC & DC Control) Conformity to International Standards IEC, UL, CSA, CE 20A to 250A AC1 Rating In-built 1NO+1NC auxiliary contact High Temparature limits [Ie] Rated Operational Current AC Coil Voltage Code Poles Composotion AC control DC control 4NO LC1DT20* 1220 LC1DT20** NO+2NC LC1D098* 1370 LC1D098** NO LC1DT25* 1350 LC1DT25** NO+2NC LC1D128* 1650 LC1D128** NO LC1DT32* 1410 LC1DT32** NO+2NC LC1D188* 1800 LC1D188** NO LC1DT40* 2160 LC1DT40** NO+2NC LC1D258* 2745 LC1D258** NO LC1DT60A* 5895 LC1DT60A** NO+2NC LC1D40008* 8525 LP1D40008** NO LC1DT80A* 8510 LC1DT80A** NO+2NC LC1D65008* LP1D65008** NO LC1D80004* LP1D80004** NO+2NC LC1D80008* LP1D80008** NO LC1D * LC1D ** VOLTAGE LC1-DT20 to DT40 & LC1-D09 to D25 50/60Hz - F7 M7 N7 AC* LC1-DT60A & DT80A B7 F7 M7 N7 LC1D400 - D800, D115 50Hz - F5 M5 N5 DC** LC1DT20...DT40, LC1-DT60A & DT80A & LC1D09...D80, D115 and LP1D LP1D800 BD FD MD - Note: For ordering contactors with other coil voltages & frequencies, please add ` 135/- to the unit MRP of the standard contactor of the same rating. Capacitor Duty Contactors (AC Control) Special Contactors designed for switching 3Phase capacitors Conformity to IEC Standards Current limitation by the inbuilt damping resistors 1NO + 1NC inbuilt auxiliary contact Nominal Reactive Power 440 V Auxiliary Contacts with Damping Resistors & Block of Early Make poles * Coil Voltage Code 12.5 kvar 16.7 kvar 20 kvar 25 kvar 1 NO + 1 NC LC1DFK11* 2 NC LC1DFK02* 1 NO + 1 NC LC1DGK11*C 2 NC LC1DGK02*C 1 NO + 1 NC LC1DLK11* 2 NC LC1DLK02* 1 NO + 1 NC LC1DMK11*C 2 NC LC1DMK02*C 33.3 kvar 1 NO + 2 NC LC1DPK12*C kvar 1 NO + 2 NC LC1DTK12*C kvar 1 NO + 2 NC LC1DWK12*C VOLTAGE LC1-DFK... DMK 50/60Hz F7 M7 N7 LC1DPK...DWK 50HZ F5 M5 N5 Note: For ordering contactors with other coil voltages & frequencies, please add ` 135/- to the unit MRP of the standard contactor of the same rating

6 Accessories - For D Model Contactors Contacts Add On Blocks 1 NO LADN10* 1 NC LADN01* 145 Additional instantaneous auxiliary contact blocks Pneumatic timer blocks front mounted Front Mounted Time Delay Range Timer Type On delay timer (1) (2) s On delay LA4DT2U On delay timer (1) (2) s On delay LA4DT0U On delay timer (1) (2) s On delay LA4DT4U Off-delay timing relay with control contact - 24 V AC/DC s Off Delay RE8RA11B Off-delay timing relay with control contact 110 V V AC s Off Delay RE8RA11FU Off-delay timing relay with control contact - 24 V AC/DC s Off Delay RE8RA21B Off-delay timing relay with control contact 110 V V AC s Off Delay RE8RA21FU Relay interface module - 24V DC (1) (2) - - LA4DFB 1860 (1) For LC1 D A (3P, AC coils only) add mounting adaptor LAD4BB - MRP ` 415/- and for LC1 D40A...65A (3P, AC coils only), add mounting adaptor LAD4BB3 - MRP ` 935/-. (2) For LC1D (3P), direct mounting, for V AC Coils only. 2 NO LADN NO+1NC LADN11 2 NC LADN02 2 NO+2NC LADN22 4 NC LADN04 4 NO LADN40 1 NO+3NC LADN13 3 NO+1NC LADN31 Side 1 NO+1NC LAD8N11 Mounted (1) 2 NO LAD8N20 ON delay OFF delay 1 NO+1NC s LADT0 1 NO+1NC s LADT2 1 NO+1NC s LADT NO+1NC 1..30s (2) LADS NO+1NC s LADR0 1 NO+1NC s LADR2 1 NO+1NC s LADR4 Set of shins to be used with 4 pole contactors LA9D (1) Suitable for mounting on D Model range AC Coil Contactors and Control Relays only (2) With Switching time of 40 ms between opening of the NC contact and closing of the NO contact recommended for Star - Delta Starters * Suitable for 80 Amps, 95A & Model F Contactors only Mounting Location For Use With Contactor For D Model Mechanical Latch Blocks Front, Clip-on LC1 D09...D38 (a or c) LC1 DT20...DT40 (a or c) LC1 D40A...D65A (3P a or c) LC1DT60A AND DT80A (4P a or c) LC1 D80...D150 (3P a) LC1 D80 AND D115 (3 P c) LC1 D80 (4 P a) LC1 D80 AND D115 (4 P a) LP1 D80 AND LC1 D115 (4 P c) * Replace by Voltage Code (AC 50/60 Hz / DC) Note: For ordering Mechanical Latch Block with other coil voltages, please add Rs. 135/- to the unit MRP of the standard reference *Coil Voltage Code VOLTAGE (AC/DC) 24 42/48 110/ / /415 Code B E F M Q LAD6K10* 2430 LA6DK20*

7 Accessories - D Model For use with contactor Mechnical interlock LC1D09..D38, LC1DT20..DT40 LAD9V2 (1) 375 LP1D , LC1D LA9D LP1D 80 LA9D LC1D LA9D Ready made reversing kit LC1D09..D38 LAD9R1 (2) 540 LAD9R1V (3) 750 (1) only of mechanical interlock (For mechanical strength use mounting clip LAD9V17, when using only mechanical interlock. Price available on request) (2) Set of power connections with mechanical interlock. (3) Set to power connections with mechanical and electrical interlock. Fixing For Contactors (D40A, 50A, 65A, DT60A & DT80A) Mechnical Interlock Varistor ( V) Varistor ( V) Clip - On LAD4CM 765 LAD4V3E LAD4V3U 650 RDOL kit LAD9R Allenkey - LADALLEN4 920 RC circuit ( V) Clip - On LAD4RC3U 375 Spare coils D model Product Compatibility AC Coils CAD, LC1-D09...D38, DT LC1D40A, D50A, D65A & LC1DT60A, DT80A LXD1* 645 LXD3* 1760 D80 & D95 (3P & 4P) LX1D6* 1865 LC1 - D115 LX1D8* 2760 LC1-D150 LX1D8* 3610 DC Coils LC1-D80-D95 LX4D7** 5560 LC1-D115, D150 LX4D8** 6120 Note: For ordering coils with other voltages and frequencies, please add ` 135/- to the unit MRP of the respective standard coil. Coil Voltage Code TYPE VOLTAGE (V) AC* CAD, LC1-D09...D38, DT20..40,LC1 - D150,LC1D40A, D50A, D65A & LC1DT60A, DT80A - F7 M7 N7 D80 & D95 (3P & 4P), LC1 - D115 - F5 M5 N5 DC** LC1-D80, LC1-D115, D150 BD FD MD - For Use With For Contactor D115/150 Product Compatibility Coil Suppressor Modules LC1-D12...D25 (4P) Fixing Control Circuit Voltage Suppressor Type V AC RC Circuit AC LA4DA1E LC1-D12...D25 (4P) V AC RC Circuit AC LA4DA1U LC1-D12 & D25 (4P) V DC Diode DC LA4DC1U LC1-D12...D25 (4P) V AC/DC Varistor AC/DC LA4DE1E V AC/DC Varistor AC/DC LA4DE1U Clip-on V AC Varistor AC/DC LAD4VE LC1D09...D38, LC2D09...D38, LC1DT20...DT40, LC2DT20...DT40 (3P) LC1D80, LC1D95, LC2D80, LC2D95 (3P) LC2D80 (4P), LC1D40008, LC1D65008 LC1D80...D115, LC2D80...D115 (3P) LC1D80...D115, LC2D80...D115 (4P) LC1D80...D150, LC2D80...D150 (3P) LC1D4008, LC1D65008, LC1D115, LC2D40...D115 (4P) LC1D80...D95, LC2D80...D95, (3P) LC1D80, 4 poles LC2D80 (4P) Screw V AC 400 Hz RC Circuit AC LAD4RCE V AC 200 Hz RC Circuit AC LAD4RCG V AC 100 Hz RC Circuit AC LAD4RCU V AC Varistor AC/DC LAD4VU V DC Diode DC LA4DC3U V AC Varistor AC/DC LA4DE2E V AC Varistor AC/DC LA4DE2U V AC 400 Hz RC Circuit AC LA4DA2E V AC 200 Hz RC Circuit AC LA4DA2G V AC 100 Hz RC Circuit AC LA4DA2U V AC 150 Hz RC Circuit AC LA4DA2N V DC Varistor AC/DC LA4DE3E V DC Varistor AC/DC LA4DE3U Arc chamber - 3P LC1D1156 LA5D Arc chamber - 3P LC1D1506 LA5D Contacts set - 3P LC1D1156 LA5D Contacts set - 3P LC1D1506 LA5D Contacts set - 4P LC1D LA5D

8 Thermal Overload Relays - D Model Conformity to International Standards IEC, UL, CSA Range available - 0.1A to 104 A Direct mounting on contactors is possible upto 95A Higher operating temperature Tripping class 10A & 20A available Electronic Relays - D Model Conformity to International Standards IEC, UL, CSA Higher operating temperature up to 55ºC Tripping class selectable on product Manual & auto reset is possible Thermal Protection Adjustment Range For Use With LR-D Model (Direct Mounting) A * LRD A LRD A LRD A LRD A LRD A GV2L03, LE03, LRD A LC1D09...LC1D38 LRD A LRD A LRD A LRD A LRD A LRD A LRD A A GV2L22, LC1D25...D38 LC1D25...LC1D38, LC1D32 LRD LRD A LC1D32, LC1D38 LRD A LC1D40A...D65A LC1D80...LC1D95 LRD332 LRD A LC1D40A...D65A LRD A LC1D80...LC1D95 LRD A LC1D40A...D65A LRD LC1D80...LC1D95 LRD A LC1D40A...D65A LRD A LC1D80...LC1D95 LRD A LC1D65...LC1D95 LRD A LC1D80, LC1D95 LRD Note: *For LRD01...LRD35 - Terminal Block for clip-on Mounting LAD7B106 : ` 395/- *For LRD33** - Terminal Block for clip-on Mounting LA7D3064 : ` 1185/- For LRD332, LRD340, LRD350 & LRD365 - Connection block for separate mounting LAD96560 : ` 1195/- The LRD relays can be used for AC or DC current up to 104 Amps For long starting, Class 20 relays are available on request. Device for remote tripping and electrical reset is available on request. Thermal Protection Adjustment Range For Use With LR97D Electronic Motor Protection Relay A LC1D09...D38 LR97D015** A LC1D09...D38 LR97D07** A LC1D09...D38 LR97D25** A LC1D09...D38 LR97D38** 7305 LT47 Electronic Motor Protection Relay A LT4706**# A LT4730**# A LT4760**# 5055 ** Coil Voltage Code VOLTAGE 24 V AC/DC 48 V AC/DC 110 V AC 220 V AC Code B E F7 M7 # S - Manual/Electric Reset # A - Automatic Reset 59

9 Power Contactors - F Model (3 Pole AC/DC Control) [Ie] Rated Operational Current AC1 Motor Power (Long Life) AC3 kw hp A Conformity to International Standards IEC, UL, CSA, CE High electrical life Amps, AC/DC coils Type 2 Coordination Charts available Common accessories as Model D Motor Power (Normal Life) AC3 kw hp A LC1F LC1F LC1F LC1F LC1F LC1F LC1F LC1F LC1F LC1F Note: Contactor reference does not include coil. Contactor coil & aux. contacts to be ordered separately.(coil includes 1 NO contact) Please select coils from below table separately. For additional auxiliary block and other accessories please see page 61 Power Contactors - F Model (2 Pole & 4 Pole AC/DC Control) Conformity to International Standards IEC, UL, CSA 2 and 4 pole versions available Amps in AC-1 duty, AC/DC coils Common accessories same as Model D High electrical life [Ie] Rated Operational Current AC1 Power Pole Composition 200 A 4 NO LC1F A 4 NO LC1F A 4 NO LC1F A 4 NO LC1F A 4 NO LC1F A 4 NO LC1F A 2 NO LC1F A 4 NO LC1F A 2 NO LC1F A 4 NO LC1F A 2 NO LC1F A 4 NO LC1F A 4 NO LC1F Note: Contactor reference does not include coil. Contactor coil & aux. contacts to be ordered separately.(coil includes 1 NO contact) For additional auxiliary block, timers & other accessories please see page 61 Power terminals may be protected by the addition of shrouds, to be ordered separately. Coils F Model Product compatibility AC Coil DC Coil (2) LC1F115, LC1F150 LX1FF* 2740 LX4FF** 7045 LC1F185, LC1F225 LX1FG* 3910 LX4FG** 9245 LC1F265, LC1F330 LX1FH* 4910 LX4FH** LC1F400 LX1FJ* LX4FJ** LC1F500 LX1FK* LX4FK** LC1F630 LX1FL* LX4FL** LC1F780 LX1FX* (3) LX4FX** (3) LC1F800 (1) - LX4F8** Please replace ( * ) with the Corresponding Control Voltage. (4) (3) Set of two coils to be connected in series. (4) ` 6460/- Coil Voltage Code Type Voltage (V) AC* DC** LC1F115--F225, LC1F LC1F265, LC1F LC1F115--F LC1F400--F LC1F800 - FW MW Note: For ordering coils with other voltages and frequencies, please add ` 135/- to the unit MRP of the respective standard coil. 60

10 Vacuum Contactors (3 Pole AC Control) [Ie] Rated Operational Current Motor Power Auxiliary AC1 AC3 kw hp Contacts Accessories - D and F Model Contacts Add On Blocks 1 NO LADN10* 1 NC LADN01* 160 A 160 A NO + 1 NC LC1V160* A 320 A NO + 1 NC LC1V320* A 610 A NO + 1 NC LC1V610* * Coil Voltage Code VOLTAGE Code FE7 P7 V7 R7 X7 Note: Accessories for Vacuum Contactors available on request, please contact our Sales O 145 Additional instantaneous auxiliary contact blocks Pneumatic timer blocks front mounted Front Mounted 2 NO LADN NO+1NC LADN11 2 NC LADN02 2 NO+2NC LADN22 4 NC LADN04 4 NO LADN40 1 NO+3NC LADN13 3 NO+1NC LADN31 Side Mounted (1) 1 NO+1NC 2 NO LAD8N11 LAD8N20 ON delay OFF delay 1 NO+1NC s LADT0 1 NO+1NC s LADT2 1 NO+1NC s LADT NO+1NC 1..30s (2) LADS NO+1NC s LADR0 1 NO+1NC s LADR2 1 NO+1NC s LADR4 (1) Suitable for mounting on D Model range AC Coil Contactors and Control Relays only (2) With Switching time of 40 ms between opening of the NC contact and closing of the NO contact recommended for Star - Delta Starters * Suitable for 80 Amps, 95A & Model F Contactors only For Use With Contactor Mechanical Interlocks (1) - Horizontally Mounted 1650 LC1F115, LC1F150, LC1F1154, LC1F1504 LA9FF LC1F185, LC1F1854, LC1F225, LC1F2254 LA9FG LC1F265, LC1F330, LC1F400, LC1F500, LC1F2654, LC1F3304, LC1F4004, LC1F5004 LA9FJ LC1F630, LC1F6304, LC1F800 LA9FL (1) For assembly of 3/4 pole 2 contactors of identical rating. To obtain electrical interlocking, please order 2 contact blocks LADN11 All power connections are to be made by the user. Main Contact Sets* LC1F115, LC1F150 LA5FF LC1F185, LC1F225 LA5FG LC1F265 LA5FH LC1F330, LC1F400 LA5F LC1F500 LA5F LC1F630 LA5F LC1F800 LA5F Suppressor Blocks For use with 110 V 220 V suppressor module clip on All AC ratings LA4FRCF LA4FRCP 2855 suppressor bracket For all LA4F LA9D

11 Coils F Model Product compatibility Coil Voltage Code Type Voltage (V) AC* DC** Product compatibility 110V 220/230V Hoisting Applications - AC Colis LC1F265, LC1F330 AC Coil LC1F115--F225, LC1F LC1F265, LC1F LC1F115--F LC1F400--F LC1F800 - FW MW Please replace ( * ) with the Corresponding Control Voltage. (4) (3) Set of two coils to be connected in series. (4) ` 6460/- DC Coil (2) 415/440V LC1F115, LC1F150 LX1FF* 2740 LX4FF** 7045 LC1F185, LC1F225 LX1FG* 3910 LX4FG** 9245 LC1F265, LC1F330 LX1FH* 4910 LX4FH** LC1F400 LX1FJ* LX4FJ** LC1F500 LX1FK* LX4FK** LC1F630 LX1FL* LX4FL** LC1F780 LX1FX* (3) LX4FX** (3) LC1F800 (1) - LX4F8** Note: For ordering coils with other voltages and frequencies, please add ` 135/- to the unit MRP of the respective standard coil. LX9FH1102 LX9FH LC1F400 LX9FJ925 LX9FJ931 LX9FJ LC1F500 LX9FK925 LX9FK931 LX9FK LC1F630 LX9FL924 LX9FL931 LX9FL Electronic Relays Thermal Protection Adjustment Range LR9-F Electronic Protection Relays A LR9F A LR9F A LR9F A LR9F A LR9F Accessories For LR9 - F Relay Mounting plate LA7F For Use With Connection Accessories LA7F busbar Relay Type LR9-F5369, LR9-F5371 LA7F LR9-F7375, LR9-F7379, LA7F LR9-F7381 LC1F115 LR9-F5369 LA7F LC1F225/265 LR9-F5371 LA7F LC1F Conformity to International Standards IEC, UL, CSA Direct mounting on contactors is possible upto 630A Higher operating temperature Tripping class 10 LR9-F7375, LR9-F7379, LA7F LR9-F7381 LC1F500 LR9F7381 LA7F LC1F630/800 LR9-F7381 LA7F Note: DR5TE4S* for V, MRP ` 6460/- needs to be added extra with coil. Product compatibility 48V 110V Hoisting Applications - DC Coils 220V 440/460 V LC1F400 LX9FJ918 LX9FJ926 LX9FJ932 LX9FJ LC1F500 LX9FK918 LX9FK926 LX9FK932 LX9FK LC1F630 LX9FL918 LX9FL926 LX9FL931 LX9FL Note: Resistor is a must with every coil as per the quantity mentioned. MRP ` 2335/- needs to be added extra with coil. Economy Resistor to be selected from below table as per coil voltage code Contactor 110 V 220 V Economy Resistor To be used with hoisting application DC coil 440/460 V LC1F400 1 x DR2SC x DR2SC x DR2SC4700 LC1F500 1 x DR2SC x DR2SC x DR2SC3300 LC1F630 2 x DR2SC x DR2SC x DR2SC3900 Unit MRP

12 Installation Systems Modularity Easy and Fast Installations Reduced and error free wiring Reduced down time 1. TeSys Pre-fabricated Star- Delta Kit NEW This kit enables Power and control interconnections to form the star delta starters. Kit contains 1 No. time delay contact block, ready to use power circuit connections and control busbar for wiring. KM2 Timer MPCB Busbar Reduced and Error free wiring as ready to use connecting bus bars available Easy and fast installation as no wiring, ferruling and labeling required Reliability and Enhanced safety, optimum use of electrical conductors For Use with contactor Kit MRP KM3 KM1 Contactor LC1D09-LC1D12 LAD91217 On Request LC1D18-LC1D32 LAD93217 On Request LC1D40A-LCD150A LAD9SD3 On Request LC1D80 LA9D8017 On Request LC1D09...D38 GV2AF3 325 Busbar * Kit comprises of 1 time delay contact block and bus bar for power circuit connection. * MPCB & Contactor interconnecting Busbar(GV2AF3) to be ordered separately 2. TeSys S - shaped bus bar NEW TeSys S shaped enables to mount contactor and MPCB Side by side reducing panel size. MPCB GV3S With S shaped bus bar, side by side mounting of contactor, MPCB and OLR is possible. Panel space saving as no external wiring required between contactor and MPCB For Use with contactor MRP Contactor LC1D40A- LC1D65A GV3S On Request 63

13 3. TeSys D Bus Bar NEW Ready to use Adaptor plates along with comb shaped Bus bar LAD311 GV1G09 GV2G445 LAD311 GV2G254 MPCB Ready made assemblies for Contactor and MPCB with ready to use adaptors and bus bars enables more number of starter assemblies in simple way. which can be further mounted on Din Rail. Inter Connection link between contactor and MPCB is also readily available to make power connections. Busbar are used to distribute input power supply to all starters. GV1G10 GV2AF4 Contactor With such assemblies, Standardization of the starter components can be done. Optimum use of panel space can be achieved. Considerable saving in installation time as the assembly is almost wire less. Supply wires required to be plugged in the bus bar terminals MRP Adaptor Plate LAD311 On Request Terminal Block GV1G09 On Request 3 - pole bus bar 4 tap-offs GV2G445 On Request 3 - pole bus bar 2 tap-offs GV2G254 On Request Protective Cover GV1G10 On Request Combination Block GV2AF4 On Request 4. TeSys AK5 pre-assembled busbar system NEW AK5JB143 AK5PC33 The assembly of automated control and distribution panels requires the use of Products those are not only safe but also simple and quick to mount and cable. MPCB The AK5 pre-assembled busbar system meets all these criteria by incorporating adopters which can be mounted directly on busbars for Current distribution. Contactors and MPCB / OLR can be wiring. MPCB Space saving Saving of wiring and installation time. Contactor MRP Bus bar 12 Taps AK5JB143 On Request AK5PA231 AK5PA232 LA9Z40132 Power socket 3 Phase 32 Amps Double component Mounting Plate 25 Amps Single component Mounting Plate 25 Amps AK5PC33 AK5PA232 AK5PA231 On Request On Request On Request MPCB MRP Adaptor for Bus bar 32 Amps LA9Z40132 On Request GV2AF3 Contactor reversing Combination 64

14 Motor Circuit Breakers Breaking Motor Power Capacity AC3** at 415 V 50 Hz kw hp Thermal Protection Adjustment Range GV2-M Model Thermal Magnetic - With Pushbutton Control (Economy) 100 ka 15 ka (1) GV2ME GV2ME GV2ME GV2ME GV2ME GV2ME GV2ME GV2ME GV2ME GV2ME GV2ME GV2ME GV2ME GV2ME ka (1) GV2ME GV2-P Model Thermal Magnetic - With Rotary Handle Control 100 ka GV2P GV2P GV2P GV2P GV2P GV2P GV2P GV2P GV2P GV2P GV2P ka (2) GV2P GV2P GV2P ka (2) GV2P GV3-P Range Thermal Magnetic - With Rotary Handle Control 50 ka A GV3P A GV3P A GV3P GV3-M Range Thermal Magnetic - Pushbutton Control 15 ka A GV3ME ** 50/60Hz V (1) With GV1-L3 current limiter, breaking capacity can be increased to 100 ka Combination of the GV2-M with the D Model provides Type 2 coordination. (2) With GV1-L3 current limiter, breaking capacity can be increased to 100 ka. Combination of the GV2-P with the D Model providestype 2 coordination. Breaking Capacity at 415 V 50 Hz 65 Conforming to IEC Thermal magnetic circuit breakers rage from Amps High Breaking capacity up to 100 ka Conformity to International Standards - UL, CSA, CE Wide range of accessories S-shaped busbar for side-by-side connection with 40-65A Contactor Motor Circuit Breakers Motor Power AC3** Magnetic Protection Rating (A) kw hp GV2-LE Model Magnetic - With Rocker Lever Control (Economy) * GV2LE ka 15 ka GV2LE GV2LE GV2LE GV2LE GV2LE GV2LE GV2LE GV2LE GV2LE GV2LE ka GV2LE GV2-L Model Magnetic- With Rotary Handle Control * GV2L ka 50 ka GV2L GV2L GV2L GV2L GV2L GV2L GV2L GV2L GV2L GV2L22 GV3-L Range Magnetic - With Rotary Handle Control GV3L ka Conforming to IEC Magnetic circuit breakers rage from A Amps High Breaking capacity up to 100kA Conformity to International Standards - IEC, UL, CSA, CE Wide range of accessories GV3L GV3L GK3 Range Optimal Magnetic - With Rotary Handle Control * 35 ka GK3EF * Conforming to IEC ** 50/60Hz V GV2-L with the D Model contactor and LRD overload relay provides Type 2 Coordination Breaking Capacity at 415 V 50 Hz* Motor Power AC3** kw Thermal Protection Adjustment Range GV7-R Range Thermal Magnetic (220A, AC3) 36 ka GV7RE ka 70 ka GV7RE GV7RE GV7RS GV7RS GV7RS GV7RS GV7RS GV7RS * Conforming to IEC for Type 2 coordination ** 50/60Hz V.

15 Accessories for Motor Circuit Breakers For GV2 Front contact NO or NC (1) GVAE1 530 Front contact NO + NC Side contact NO + NC Fault signalling contact +1 NO contact (2) Fault signalling contact +1 NC contact (2) GVAE11 GVAE20 GVAN11 GVAN20 GVAD1010 GVAD Short circuit signalling contact block 1 C/O GVAM Undervoltage trip : Shunt trip : V 50Hz GVAU V 50Hz GVAU V 50Hz GVAU V 50Hz GVAS V 50Hz GVAS V 50Hz GVAS385 Additive limiter for increasing breaking capacity to100ka for GV2ME and GV2P. Connection block - GV2 with contactor LC1-D09..D38 Connection block - LS1 D32 or GV2 with contactor LC1-K or LP1-K Empty enclosure for GV2ME - plastic 1715 GV1L GV2AF3 325 GV2AF GV2MP GV2MC (1) Choice of NC or NO contact operation depending on which way round the reversible block is mounted. (2) The GV-AD is always mounted next to the circuit breaker. Busbars Connection Pitch For GV2 Breakers 45 mm 54 mm 72 mm Accessories for Busbars Terminal block - to supply one or more 3-pole busbar GV2 Protective end covers for unused busbar outlets Accessories for Motor Circuit Breakers For GV3-M Auxiliary contact - 1 NO + 1 NC early-break GV3A01 Auxiliary contact - 2 NO early-break Under voltage release V AC 50Hz Under voltage release V AC 50Hz Under voltage release V AC 50Hz Shunt release V AC 50Hz Shunt release V AC 50Hz Shunt release V AC 50Hz No. of Tapoff Points 2 GV2G GV2G GV2G GV2G GV2G GV2G GV2G GV2G GV3A02 GV3B11 GV3B22 GV3B38 GV3D11 GV3D22 GV3D38 GV2G GV1G Terminal block for connection from top GV1G Accessories for Motor Circuit Breakers For GV2-P/GV2-L External operator - IP54, Black GV2APN External operator - IP54, Yellow/Red GV2APN Visible isolation block - for motor circuit breaker GV2 For GV3P/GV3L Auxiliary Contacts For GV7 Operating Voltage Accessory for direct rotary handle mount on door (2) - GV7AP Auxiliary contact - 1 OC - GV7AE Clip-on connector - upto 150 A mm 2 - GV7AC Clip-on connector- upto 220 A mm 2 - GV7AC Fault discrimination Device Front rotary handle GV7AP GV7R - black handle (2) V DC/ V AC GV7AD V AC/ GV7AD112 DC GV7AP GV7AP Padlocking device padlocks Ø 5..8mm shank (3) - GV7V Phase barriers - GV7AC Terminal shields IP405 (1) - GV7AC For GV7 Shunt release Under Voltage release 3-pole spreader - for Motor circuit breaker GV7 45 mm pitch V AC 50/60 Hz V AC 50/60 Hz V AC 50/60 Hz V AC 50/60 Hz V AC 50/60 Hz V AC 50/60 Hz GV2AK Front contact: 1 NO (fault) + 1 NC (Auxiliary)GVAED Front contact: 1 NO (fault) + 1 NO (Auxiliary) GVAED Busbar 3-pole, 3 tap, 64 mm pitch GV3G S-shape bus bar GV3S 510 External Operator IP54, Black GV3APN01 IP54, Yellow/Red GV3APN For GK3 Padlockable external operator GK3AP Instantaneous Aux. Contacts NC + NO for GK3 GK2AX Instantaneous Aux. Contacts NO + NO for GK3 GK2AX Note: All other accessories are same as of GV2 GV7AS107 GV7AS207 GV7AS387 GV7AU107 GV7AU207 GV7AU GV7AC (1) Terminal shields cannot be used together with spreaders. (2) For mounting direct rotary handle on enclosure door. This accessory makes it possible to open the door If the device is closed and prevents the device from being closed if the door is open. 66

16 Vario Switch Disconnectors [Ithe] Conventional Thermal Current** Poles Rated Operational Power (AC 23)* Complete Enclosed Switches Range 12 to 175 A, IP 65 Sealable and Lockable 10 A 3P 4 kw VCF02GE A 3P 5.5 kw VCF01GE A 3P 7.5 kw VCF0GE A 3P 11 kw VCF1GE A 3P 15 kw VCF2GE A 3P 22 kw VCF3GE A 3P 30 kw VCF4GE 5350 * Rated Power at 415 V ** Ith in enclosure For Switch Type (Amps) Mounting Arrangement Operators (Padlockable) Ingress A 4 Screw Fixing IP65 KCF1PZ A 4 Screw Fixing IP65 KCF2PZ A 4 Screw Fixing IP40 KCF3PZ 1665 Vario Switch Disconnectors [Ith] Conventional Thermal Current Poles Complete Switch with Padlockable Operator Suitable for Front Mounting or Base Mounting 12 A 3P VCF A 3P VCF A 3P VCF A 3P VCF A 3P VCF A 3P VCF A 3P VCF A 3P VCF A 3P VCF Switch Bodies 12 A V A V A V A V A V A V A V A V A V Accessories Vario Add-on Modules (1) Main Pole Module For Use with Switch Bodies Rating Pole Pole Composition Earth Contact Auxiliary Contacts V02/VCF02 12 A 1P - - VZ V0/1/VCF01 20 A 1P - - VZ V0/VCF0 25 A 1P - - VZ0 520 V1/VCF1 32 A 1P - - VZ1 540 V2/VCF2 40 A 1P - - VZ2 580 V3/VCF3 63 A 1P - - VZ3 720 V4/VCF4 80 A 1P - VZ4 720 Neutral Pole Module (2) V3 / VCF3 to V4 / VCF4-1N - - VZ V02 / VCF02 to V2 / VCF2-1N - - VZ Earthing Module Auxiliary Contact Block Module V5 / VCZ5 to V6 / VCZ6-1N - - VZ V02 / VCF02 to V2 / VCF VZ V3 / VCF3 to V4 / VCF VZ V5 / VCZ5 to V6 / VCZ VZ V02/ VCF02 to V6 / VCZ NO + 1 NC VZ7 605 V2/ VCF02 to V6 / VCZ NO VZ (1) For mounting option of modules, please refer to the technical catalogue. (2) With early make and late break contacts For Use With Components for Door Interlocking Shaft extension - for Mini-VARIO and VARIO - V02..V2 Shaft extension - for Mini-VARIO and VARIO - V3 V4 V5 V6 Door interlock plate Input Terminal Protection Shrouds Terminal Shrouds V02...V2 V3, V4, V5, V6 VZ VZ30 VZ VZ VZ17 / VZ30 KZ VZ18/31 KZ V02 - V2 VZ8 205 V3 - V4 V5 - V6 V02 - V6 VZ VZ9 205 VZ VZ VZ VZ

17 Communication systems on Ethernet NEW This solution enables communication of conventional starter, Tesys U and Tesys T with PLC for status, control & monitoring on Ethernet. The communication module connected to Advantys RIO system can be directly mounted on control terminals of conventional contactors & MPCB.TeSys U module with Advantys communication card can be incorporated in similar architecture. Advantys RIO system will be further connected to PLC on Ethernet to give status, control and monitoring functionalities. Advantys RIO 3 1 FO Link EtherNet Link 4 20 MPCB 6 TeSys T 8 Advantys Link 19 Contactor Reversal Assemble Communication Adaptor 18 TeSys U 10 Parallel Link MPCB 14 Contactor Communication Adaptor STB EPI 2145 Parallel Module 2. STB NIP 2210 (Ethernet TCP/IP) 3. (EOS/End of segment) STB XBE Bus connecting cable LU9 RCD** 5. Cat 5 Ethernet Cable. 6. LU9 R * - Connecting Cable. 7. Ethernet Switch. 8. LTMR**EFM. 9. LULC15 Advantys Card. 10. LUB12/LUB32 Base. 11. LU9BN11L- Pre Connector. 12. LUCB**BL Control Unit. 13. LAD 9AP** 14. LC1 D**3 15. GV2 ME**3 16. LAD 3B1 17. LAD LC2 DppA3 19. LAD 9AP** 20. GV3P 21. LAD 331 Note: For complete references, please contact our nearest Sales O 68

18 Te Te Te T e Y TeSys y 69

19 Starters D.O.L Thermal protection Adjustment Range Motor Power kw LE1-M Model Enclosed Conforming to IEC for motors upto 7.5 kw A 0.25 LE1M35** A 0.37 LE1M35** A 0.55 LE1M35** A 0.75 LE1M35** A 1.50 LE1M35** A 2.20 LE1M35** A 3 LE1M35** A 4 LE1M35** A 5.50 LE1M35** A 7.50 LE1M35** ** Coil Voltage Code VOLTAGE 220/ / /415 Code M7 Q7 N7 TeSys T Motor Management System - Controllers Modbus P 0.4 to 8A LTMR08M** LTMR08P** On Request 1.35 to 27A LTMR27M** LTMR27P** On Request 5 to 100A LTMR100M** LTMR100P** On Request Note: Above 100 Amps external CT required Amps with inbuilt CTs up to 100 Amps. 24V DC and AC Control Voltages available 6 DI and 4 DO with main module and extendable further using expansion module Ethernet Connectivity to choose Integrated Protection and Measurement with full functions Quick interface with PC/PLC Dedicated HMI-LTMCU Saves Engineering and Commissioning Time Reduces Process Downtime and Maintenance Cost Extention modules LTMEV40** On Request Note: For other communication protocols, please contact our nearest Sales O ** Coil Voltage Code VOLTAGE 24 DC BD 110 to 240VAC FM TeSys U Starter-Controllers Total coordinated starter solution with 3 functions in 1 device Compact size for DOL/RDOL starter up to 15 kw, 32A (AC-3) Complete current-based Protection and Measurement in 1 device High Operational Temperature (-40 o C to +60 o C) Wide range of Coil Voltages 50 ka Breaking Capacity Power Bases for Non-Reversing D.O.L. Starter Rating at 440 V kw 12 A Upto 5.5 LUB12 On Request 32 A Upto 15 LUB32 On Request Control Units Rating at 440 V kw Standard Advanced Multifunction A 0.09 LUCAX6** LUCBX6** LUCMX6BL On Request A 0.25 LUCA1X** LUCB1X** LUCM1XBL On Request A 1.5 LUCA05** LUCB05** LUCM05BL On Request 3 12 A 5.5 LUCA12** LUCB12** LUCM12BL On Request A 7.5 LUCA18** LUCB18** LUCM18BL On Request 8 32 A 15 LUCA32** LUCB32** LUCM32BL On Request Note: To make the complete unit you need to order base and any of the control units ** Coil Voltage Code VOLTAGE DC BL (1) (2) - - AC B - - AC/DC - ES (3) FU (4) (1) Voltage code to be used for a starter-controller with communication module. (2) DC voltage with maximum ripple of ± 10 %. (3) DC: V, AC: 48 V. (4) DC: V, AC: V. 70

20 Selection Chart: Standard DOL Motor Starters (Type 1 Co-ordination with MPCB at 415 V) Fault indication features possible Chance of single phasing reduced No replacement of fuses Motor Rating kw Operational Current in A Iq* ka More reliability No running cost Motor Circuit Breaker Thermal Range Contactor GV2ME LC1K GV2ME LC1K GV2ME LC1K GV2ME LC1K GV2ME LC1K GV2ME LC1K GV2ME LC1K GV2ME LC1K GV2ME LC1K GV2ME LC1D GV2ME LC1D GV2 ME LC1D GV2ME LC1D GV3P LC1D40A GV3P LC1D50A GV3P LC1D65A GV3ME LC1D GV7RE LC1D GV7RE LC1D GV7RE LC1D GV7RE LC1F GV7RE LC1F225 Iq* - Rated conditional short circuit at operational voltage 415/440V * High Performance DOL Motor Starters (Type 2 Co-ordination with MPCB at 415 V) No down time Fault indication features possible Chance of single phasing reduced Motor Rating kw Operational Current in A Iq* ka No replacement of HRC fuses More reliability No running cost Motor Circuit Breaker Thermal Range Contactor GV2ME LC1D GV2ME LC1D GV2ME LC1D GV2ME LC1D GV2ME LC1D GV2ME LC1D GV2ME LC1D GV2ME LC1D GV2ME LC1D GV2ME LC1D GV2ME LC1D GV2ME LC1D GV2ME LC1D GV3P LC1D40A GV3P LC1D50A GV3P LC1D65A GV7RS LC1D GV7RS LC1D GV7RS LC1D GV7RS LC1D GV7RS LC1F GV7RS LC1F225 Iq* Rated conditional short circuit at operational voltage 415/440 V * Breaking Capacity of Circuit Breakers can be increased by using current limiter type GV1L3. 71

21 Selection Chart: Standard Star Delta Motor Starters (Type 1 Co-ordination with MPCB at 415 V) Fault indication features possible Chance of single phasing reduced No replacement of hrc fuses Motor Rating kw Operational Current in A More reliability No running cost Iq* ka Motor Circuit Breaker Thermal Range Contactor GV2ME XLC1K GV2ME XLC1K GV2ME XLC1K GV2ME XLC1K GV2ME XLC1K GV2ME XLC1K GV2ME XLC1D GV2ME XLC1D GV2ME XLC1D GV3P XLC1D GV3P XLC1D GV3P XLC1D GV3P XLC1D40A GV7RE XLC1D50A GV7RE XLC1D50A GV7RE XLC1D GV7RE XLC1D GV7RE XLC1D115 Iq* Rated conditional short circuit at operational voltage 415/440 V * High Performance Star Delta Motor Starters (Type 2 Co-ordination with MPCB at 415 V) No down time Fault indication features possible No replacement of hrc fuses Motor Rating kw Operational Current in A More reliability No running cost Iq* Motor ka Circuit Breaker Thermal Range Contactor GV2P XLC1D GV2P XLC1D GV2P XLC1D GV2P XLC1D GV2P XLC1D GV2P XLC1D GV2P XLC1D GV2P XLC1D GV3P XLC1D40A GV3P XLC1D50A GV3P XLC1D50A GV3P XLC1D65A GV7RS XLC1D GV7RS XLC1D GV7RS XLC1D GV7RS XLC1D GV7RS XLC1F GV7RS XLC1F225 Iq* Rated conditional short circuit at operational voltage 415/440 V * Breaking Capacity of Circuit Breakers can be increased by using current limiter type GV1L3. 72

22 EasyPact EZC/ EasyPact CVS Moulded Case Circuit Breakers For EasyPact EZC With Thermal Magnetic Trip Unit (TMD) Conforms to IEC Suitable for isolation Suitable for EasyPact Busbar system Breaking Capacity Icu as per IEC ka 30 ka Rated Current 15A Three Pole EZC100F3015 Three Pole 20A EZC100F A EZC100F A EZC100F A EZC100F A EZC100F A EZC100F A EZC100F A EZC100F A EZC100H A EZC100H EZC100H EZC100H A EZC100H3020 EZC100H A EZC100H3025 EZC100H A EZC100H3032 EZC100H A EZC100H3050 EZC100H A EZC100H3063 EZC100H A EZC100H3080 EZC100H A EZC100H3100 EZC100H For EasyPact CVS With Thermal Magnetic Trip Unit (TMD) I IEC Suitable for Isolation Transparent Cover for trip unit as Standard Class II front face Single frame size A Breaking Capacity Ics as per IEC EasyPact CVS 100 to 250A 25 ka Rated Current 16A Three Pole LV Four Pole LV A LV LV A LV LV A LV LV A LV LV A LV LV A LV LV A LV LV A LV LV A LV LV A LV LV A LV LV

23 EasyPact EZC/ EasyPact CVS Accessories For EasyPact EZC Auxiliary Contacts (Changeover) Multifunction Auxiliary Switch 1 C/O Alarm Switch 1 C/O Spreaders EZC100 EZAUX10 EZAUX01 Spreaders (Set Of 3) 3P EZASPDR3P 290 Spreaders (Set Of 4) 4P EZASPDR4P 380 Rotary Handle Standard black handle EZAROTDS 950 Shunt Release AC V EZASHT200AC 1500 Under Voltage Release AC V EZAUVR200AC For EasyPact CVS Auxiliary Contacts (Changeover) Multifunction OF or SD or SDE or SDV Voltage Releases Shunt Release Undervoltage AC V 50/60 Hz LV LV Installation Accessories CVS 100/160/250 Spreaders (Set of 3) 3P LV Spreaders (Set of 4) 4P LV Rotary Handles Direct rotary handles CVS 100/160/250 Standard black handle LV Standard extended rotary handle Standard extended rotary handle LV

24 Price List Price List Industrial Automation Products With effect from June 03, 2013 June 2013 Price List Power Control and Protection Products With effect from June 03, 2013 Price List Softwares Products With effect from June 03, 2013 Price List Final Distribution and LifeSpace Products With effect from June 03, 2013 Price List LV- Power Quality Products and Systems With effect from June 03, 2013 Price List Metering Products With effect from June 03, 2013 Price List Low Voltage Final Distribution Products With effect from January, 2013 With effect from June 03, 2013 Price List Price List Low Voltage Distribution Products With effect from June 03, 2013 Panel Builder With effect from June 03, 2013

25 Make the most of your energy SM Schneider Electric India Pvt. Ltd. Ahmedabad Opp. Shri Krishna Centre, Mithakali Six Roads, Ahmedabad Coimbatore Fax.: Ludhiana Secunderabad A, 4th Floor, Fax.: Bangalore Sarjapur Outer Ring Road, Fax: Jaipur Jaipur Mumbai 04th Floor Solitaire Corporate Park, Andheri Kurla Road, Fax.: Vadodara t Road Alkapuri Vadodara Chandigarh SCO Sector - 34-A Jamshedpur Jamshedpur : Nagpur Vishakhapatnam Siripuram Fort, Chennai Kolkata P Sector V, Pune Above Puma Showroom Cochin Lucknow I -A, For more information, visit our website at: Customer Care Centre Monday-Saturday, 9 a.m. to 8 p.m. Toll-free numbers: , General number: Customercare.in@schneider-electric.com All Prices are in Indian Rupees. Prices are subject to change without notice. Prices charged will be as prevailing on the date of dispatch. Maximum Retail Price (MRP) is inclusive of all taxes. Distributor