ACCURA MODEL ACT-V HIGH SPEED DOUBLE ROTARY TABLET PRESS

Transcription

1

2 ACCURA MODEL ACT-V HIGH SPEED DOUBLE ROTARY TABLET PRESS WITH PRE COMPRESSION 2 TONS & MAIN COMPRESSION 10 TONS 29 STN D Tooling / 37 STN B Tooling / 47 STN BB Tooling Maximum Output-3,38,400 Tablets / Hour (CFC AND AWC - OPTIONAL) DOUBLE ROTARY HIGH SPEED TABLET PRESSES In complience with cgmp. With Motorized pre compression of 2 Tons. (20 KN) With Motorized main compression of 10 Tons. (100 KN) With Motorized dozer, for precise dept of fill adjustment. With Load cell at Main-Compression For Pressure measurement With PLC & Colour MMI Touch Screen on Separate Operating Pannel. Machine is Four sides open with upper Guards. Control panel is separate. With AC Variable Drive & Zero Clearance Feeder Frame Vibration free and easy to operate at 60 RPM With Sturdy Structure design. With Sampling & Startup rejection Power Main motor 15 Hp. CFC & AWC Facility (Optional) Auto rejection (Optional) Bi layer attachment (optional).

3 ACCURA MODEL ACT-V HIGH SPEED DOUBLE ROTARY TABLET PRESS WITH PRE COMPRESSION 2 TONS & MAIN COMPRESSION 10 TONS 29 STN D Tooling / 37 STN B Tooling / 47 STN BB Tooling Maximum Output-3,38,400 Tablets / Hour (CFC AND AWC - OPTIONAL) TYPE ACT - V 29 ACT - V 37 ACT - V 47 NUMBER OF STATIONS TYPE OF TOOLING (AS PER EU1) D B BB OUTPUT TABLET / HOUR* (MIN. /MAX.) 41,760 / 2,08,800 53,280 / 2,66,400 67,680 / 3,38,400 MAX OPERATING PRESSURE MAIN (KN) MAX OPERATING PRE PRESSURE TAMP (KN) MAX TABLET DIAMETER ROUND (MM) MAX. TABLET THICKNESS (MM) 8.5 MAX DEPTH OF FILL (MM) FOR D & B & BB Tooling (WITH THREE DIFFERENT LOWER TRACK) D & B & BB Tooling SUITABLE FOR D Tooling UPPER PUNCH ENTRY MAIN (MM) 1 TO 6 UPPER PUNCH ENTRY PRE- COMPRESSION 1 TO 6 POWER TOTAL (KW/HP) MAIN ELE. MOTOR (KW/ HP) PRE.PRESS ROLL ELE MOTOR(KW/HP) MAIN PRESS ROLL ELE. MOTOR (KW/ HP) WEIGHT ADJ. ELE MOTOR (KW/HP) FEEDER ELE. MOTOR (KW/HP) HOPPER CAPACITY OVERALL DIMENSIONS (CM) (WITH CLOSE OVERALL DIMENSIONS (CM) (WITH OPEN 8.40 KW / HP 7.5 KW / 10 HP X 1440 RPM 0.025/0.0335, 1440 RPM X 2 NOS = 0.05 / KW/HP 0.025/0.0335, 1440 RPM X 2 NOS = 0.05 / KW/HP 0.025/0.0335, 1440 RPM X 2 NOS = 0.05 / KW/HP 0.37/0.50, 1440 RPM X 2 NOS = 0.74 / 1.0 KW/HP 17 LTR 135 L X 126 W X 205 H CM 271 L X 271 W X 205 H CM NET WEIGHT (Kg.) GROSS WEIGHT (Kg.) UTILITES * Depending upon material characteristic & available room atmosphere only. 3,500 kg.approx 4,000 kg.approx 1). SUCTION : CFM 2). COMPRESSED AIR: 5KG /SQ.CM (5 BAR) 3). POWER SUPPLY :- 415 V 3 PHASE, 50 HZ * Pre-pressure and Main pressure could be changed depending upon the size of the compress and filling depth, Powder or granulation.it is dependent on the physical specification of the used material for the compress. * The above specification and Features of the Machineries are subject to change without any prior notice for the technicaldevelopment.

4 ACCURA MINI PRESS (R & D Model) TABLE TOP SQUARE GMP SINGLE ROTARY TABLET PRESS 8 Stn. D, 10 Stn. B, 10 Stn. D & Combo Tooling SUITABLE FOR SINGLE LAYER TABLETS Machine Type Model Number of Stations Type of Tooling Output - Tablets/Hr.* Turet RPM (Min. / Max) Max. Operating Pressure Max. Tablet Dia. Maximum Depth of fill Power Overall Dimensions (mm) Net Weight (Approx) ACCURA MINI-8 D ACCURA MINI-10 B MINI PRESS MINI PRESS 8 10 D B 2000 TO 14,000 2,000 TO 18, Tons. 6 Tons. 22 mm 16 mm 20.5 mm 17.5 mm 3.0 HP X 1440 RPM X 415 V. X 50 Hz 770 x 640 x 1277 H 375 kgs * Depending upon material characteristic & available room atmosphere only. Note : Specification and Features of the Machineries are subject to change without any prior notice. Square GMP Table Top Model Paint free tablet manufacturing zone Turret of Special Grade S.G. Iron casting Aluminum Turret Guards Anti Vibating mount. Upper punch penetreation, as a standard features Guards of Acrylic Material. Electronic Digital Tablet cum RPM Counter, as a standard features. Imported needle roller bearing provided at the bottom of turret. Grease Nipples are provided for effective lubrication, where required Force Feeder, combination of D & B Tooling, PLC, AWC, all Optional. ACCURA MINI-10 D MINI PRESS 10 D 6,000 TO 18, Tons. 22 mm 20.5 mm

5 ACCURA ACT-I MINI R&D SINGLE ROTARY TABLET PRESS (Suitable for Single & Bi-Layer) With pre compression of 10 tons. With main compression of 10 tons. 9 STN D Tooling / 11 STN B Tooling / 13 STN BB Tooling & 9 D +9 B Tooling Combo TYPE ACT-I 9 ACT-I 11 ACT-I 13 ACT-I COMBO Number of Station D+9B Type of Tooling (As per EU1) D B BB D+B Output-tablets/hour (Min / Max.) 5400/ 6600/ 7800/ 5400/ (Single Layer) Output-tablets/hour (Min / Max.)* 5400/ 6600/ 7800/ 5400/ (Bi-Layer) Turret RPM (Min.- Max.) (Single Layer) Turret RPM (Min.- Max.) (Bi-Layer) Max. Operating pressure-main (kn) Max. Operating Pre. Pressure (kn) Max. Tablet Diameter (mm) Max. Tablet Thickness (mm) 8.5 Depth of fill (mm) (With Three Different Lower Track) Upper punch entry Main (mm) 1 To 6 Upper punch entry Pre-compression (mm) 1 To 6 Power-Total (kw/hp) 2.325/3.1 Main Ele.motor (kw/hp) 2.25/3, x 1440 RPM Main Press Roll Ele. Motor(kw/hp) 0.025/ x 1440 RPM Pre. Press Roll Ele. Motor(kw/hp) 0.025/ x 1440 RPM Weight Adj. Ele. Motor(kw/hp) 0.025/ x 1440 RPM Hopper Capacity 4 Litres Overall dimensions(close guard) cm 86Lx77Wx159H Overall dimensions(open guard) cm 169.3Lx138.3Wx200.7H Case dimensions (cm) 110x100x175 H Net weight (kg) Approx. 850 Gross weight(kg) Approx Utilities 1) Suction Air :- 150 CFM 2) Power Supply :- 415 V,3 Phase, 50 Hz * Depending upon material characteristic & available room atmosphere only. NOTE : DUE TO CONTINIOUS IMPROVEMENTS IN THE MACHINERIES, SPECIFICATION OF THE MACHINERIES IS SUBJECT TO CHANGE WITHOUT ANY PRIOR NOTICE.

6 ACCURA D4 TYPE SQUARE GMP SINGLE ROTARY TABLET PRESS 16 Stn. D, 20 Stn. B, 23 Stn. DB, 8 Stn. & 12 Stn. Slugging Type (For veterinary Tablets) D4 TYPE Tablets SLUGGING TYPE (For veterinary) Machine Type D4 16D D4 20D D4 23 DB D4-8-SLG40 D4-12-SLG40 D4-8-SLG55 Number of Station Type of Tooling Punch D D DB (BOLUS) (BIGGER TYPE) Output Tablets per Hour* 13,440-40,320 16,800-50,400 19,320-57,950 5,760 (12 RPM) 10,560 (22 RPM) 8,640 (12 RPM) 15,840 (22 RPM) 3800 (8 RPM) 7600 (16 RPM) Max. Operating pressure 10 Tons 10 Tons 10 Tons 12 Tons 12 Tons 16 Tons Max.Tablet Dia 25 mm 25 mm 16 mm 40 mm 40 mm 55 mm Maximum Depth of fill 20.5 mm 20.5 mm 17.5 mm 30.0 mm 30.0 mm 30.0 mm Upper Punch Penetration mm mm mm mm m mm Main Electric Motor 3 HP / 2.2 kw 1440RPM, 415V., 3 Phase, 50 Hz. 3 HP / 2.2 kw 1440RPM, 415V., 3 Phase, 50 Hz. 3 HP / 2.2 kw 1440RPM, 415V., 3 Phase, 50 Hz. 5 HP/930PRIM 3 PH, 440 V. 5 HP/930 PRIM 3 PH, 440 V. 7.5 HP/3 PHASE, 1440 RPM, 415 V, 50 HZ Overall Dimension (mm) (L) X 910 (W) X 2150(H)... Net Weight (Kgs) * Depending upon the characteristic of material and shape & size of tablets. Note : Specification and Features of the Machineries are subject to change without any prior notice. Square Gmp Model. Machine is Having C. 1. Body & C. 1. middle plate. Paint free tablet manufacturing zone. Excellent And Operator Friendly Material Feeding System. Lower Guards of polished Stainless Steel. Upper Guards of transparent Acrylic material. Electronic / Digital, Tablet Cum RPM Counter. Turret of Special Grade S G ]RON Casting. Lower Punch Wiper Seal to prevent lower Punch jamming Higher turret speed 17 to 42 RPM. Upper punch penetration system. Inter Lock Switches to all guards. Variable Speed Pulley. One Shot Lubrication System. Double Sided Lifting Cams. Anti Vibration Mounts. Available with AC Variable Drive & Electromagnetic Clutch. (Optional) Available with force feeding attachment.(optional) Pre. Compression Arrangement.(Optional)

7 ACCURA ACT-II SINGLE ROTARY TABLET PRESS WITH EXCHANGEABLE TURRET (WITH CFC AND AWC, FACILITY) 31 STN. D Tooling / 37 STN. B Tooling / 45 STN. BB Tooling TYPE TYPE OF TOOLING OUTPUT - TABLET / HOUR MAX. OPERATION PRESSURE MAIN (KN) MAX. OPERATION PRE -PRESSURE TAMP (KN) MAX. TABLET DIAMETER (MM) MAX. TABLET THICKNESS (MM) MAX. DEPTH OF FILL (MM) UPPER PUNCH ENTRY MAIN (MM) UPPER PUNCH ENTRY PRE- COMPRESSION (MM) POWER -TOTAL (KW/H P) MAIN ELE. MOTOR (KW/ HP) PRE.PRESS ROLL ELE MOTOR(KW/HP) MAIN PRESS ROLL ELE. MOTOR (KW/ HP) WEIGHT ADJ. ELE MOTOR (KW/HP) FEEDER ELE. MOTOR (KW/HP) TURRET LIFTING ELE. MOTOR OVERALL DIMENSIONS (CM) OVERALL DIMENSIONS (CM) NET WEIGHT (KG) CASE DIMENSION (CM) UTILITIES ACT-II 31 ACT-II 37 ACT-II 45 D (EU-D. IPT D) B (EU-B. IPT B) BB (EU-B. IPT B) 22,320 TO ,640 TO 166,500 32,400 TO 2,02, FOR"D"&"B"&"BB" "D"&"B"&"BB" SUITABLE FOR Tooling Tooling "D"Tooling 1 TO 6 1 TO 6 9/12 7.5/10,1440 RPM, 415 V, 3 Ph., 50 Hz. 0.12/0.16,1440 RPM, 415 V, 3 Ph., 50 Hz. 0.12/ 0.16,1440 RPM, 415 V, 3 Ph., 50 Hz /0.0335,1440 RPM, 415 V, 3 Ph., 50 Hz. 0.37/0.50,1440 RPM, 415 V, 3 Ph., 50 Hz. 0.75/1, 1440 RPM, 415 V, 3 Ph., 50 Hz W X L X H (WITH CLOSE GUARD) 234 W X 281 L X H (WITH OPEN GUARD) KG (APPROX) 185 X 185 X 220 H Suction Air = 300 CFM Compressed Air = 5 kg. / 59 cm / 5 Bar * Depending upon material characteristic & available room atmosphere only. Note : Specification and Features of the Machineries are subject to change without any prior notice. SINGLE ROTARY TABLET PRESSES WITH EXCHAGABLE TURRET. With Motorized pre compression of 10 Tons. (100 KN) With Motorized main compression of 10 Tons. (100 KN) With Motorized dozer, for precise dept of fill adjustment. With separate operating panel with PLC & MMI color touch screen. With Load cells at pre- compression & main compression With load cells for lower punch tight detection With Auto sampling based on, either time or revolution or Punch no. Vibration free and easy to operate at 70 RPM can have an option for the use of any turret having tooling 31-D or 37- B or 45 BB Reduce the tablet rejection by AWC Provide accurate weight & tablet quality. With auto weight control (A.W.C) With auto rejection, of any single tablet, out of prescribed compaction force limit. With Easy Turret Change facility. Turret Can be changed within a very small time segment. Reduces the product change over time. Supplied with turret resting trolley.

8 ACCURA B4 TYPE SQUARE GMP DOUBLE ROTARY TABLET PRESS 27 Stn. D, 27 Stn. B, 35 Stn. B, 45 Stn. BB Machine Type ACRA-B4-27 D ACRA-B4-27 B ACRA-B4-35 B ACRA-B4-45 BB Number of Station 27 Stn. 27 Stn. 35 Stn. 45 Stn. Type of Tooling "D" "B" "B" "BB" Output-Tablets/Hr.* 54,000-1,29,000 54,000-1,29,000 70,000-1,68,000 90,000-2,16,000 Max. Operatrig Pressure 10 Tons 6.5 Tons 6.5 Tons 6.5 Tons Max.Tablet Dia 25 mm 16 mm 16 mm 11 mm Maximum Depth of fill 20 mm 17.5 mm 17.5 mm 17.5 mm Upper Punch Penetration mm mm mm mm Turret RPM (min./max.) 17 / 40 RPM 17 / 40 RPM 17 / 40 RPM 17 / 40 RPM Main Electric Motor...5 HP, 3 Phase,, 50 Hz... Overall Dimensions(mm) (L) X 1830 (W) X 1988(H)... Net Weight Kg... * Depending upon material characteristic & available room atmosphere only. Note : Specification and Features of the Machineries are subject to change without any prior notice. Square Gmp Model. AC Variable Drive & Electromagnetic Clutch. Machine is Having SG Iron casted Body & middle plate. Paint free tablet manufacturing zone. Lower Guards of polished Stainless Steel. Upper Guards of transparent Acrylic material. Digital Tablet Cum RPM Counter. Turret of Special Grade C.I. Casting. Higher turret speed 17 to 40 RPM. Upper punch penetration system. Interlock Switches to all upper guards & Flywheel. Variable Speed Pulley. One shot lubrication system. Double Sided Lifting Cams. Two-layered tablets attachment, Force feeder, PLC. (Optional) Also Available without AC Variable Drive & Electromagnetic clutch but with mechanical clutch. (Optional) Nation Wide after Sales Servicing Network.

9 ACCURA ATX-I (WITH PRE COMPRESSION) SINGLE SIDED HIGH SPEED ROTARY TABLET PRESS 26 Stn. D', 32 Stn. B, 40 Stn. BB TYPE ACCURA ATX-I-26 ACCURA ATX-I-32 ACCURA ATX-I-40 NO. OF STATION TYPE OF TOOLING D B BB OUTPUT( TABLETS/HR)*MAXIMUM / MINIMUM / / / MAX. OPERATING PRESSURE-MAIN(KN) MAX. OPERATING PRESSURE- PRE COMPRESSION (KN) MAX. TAB. DIAMETER (mm) MAX. DEPTH OF FILL(mm) UPPER PUNCH PENETRATION-MAIN (mm) 3 to 6 UPPER PUNCH PENETRATION-PRE COMPRESSION (mm) 2 to 5 TOTAL POWER (KW/HP) 4.90/6.50 MAIN ELECTRIC MOTOR(KW/HP) 5 HP, 3 Phase,, 50 Hz FORCE FEEDER ELECTRIC MOTOR (KW/HP) 0.19/0.25 POWER PACK ELECTRIC MOTOR (KW/HP) 0.75/1.00 AUTO LUBRICATION OVERALL DIMENSIONS(mm) 1945 (L) X 1815(W) X 2035 (H) NET WEIGHT(Kg) 1465 CASE DIMENSIONS (mm) 1390 (L) X 1710 (W) X 2130 (H) GROSS WEIGHT (Kg) 1865 * Depending upon material characteristic & available room atmosphere only. Note : Specification and Features of the Machineries are subject to change without any prior notice. It is a high speed Rotary tablet press for higher tablet output, suitable for large batch production. All the tablet parameters can be fine tuned during the operation of the machine from outside the tableting zone, with front controls at outside of the machine, having SEIKO dials. The machine is having PRE-COMPRESSION facility. The machine having Hydraulic Power pack for pressure loading and overload release. The machine is having electro magnetic clutch and A.C. variable frequency drive for the main motor & for force feeding motors to synchronize machine's speed & feed both also The machine is having Electromagnetic Clutch arrangements. The machine is having one piece turret of special grade casting. However, three piece turret with SS-304/SS-316 middle plate is also available (optionally). Electro less nickel plating can also be available to the turret. (optionally). The machine is having excellent BOTTOM DRIVEN FORCE FEEDING SYSTEM for material feeding. All upper guards are interlocked for safety.

10 ACCURA PRESS II DOUBLE SIDED HIGH SPEED ROTARY TABLET PRESS 37 Stn. D, 45 Stn. B, 55 Stn. BB & 61 Stn. BB Machine Type PRESS II-37 PRESS II-45 PRESS II-55 PRESS II-61 Number of Stations Type of Tooling D B BB BB Output-Tablets/Hr.(Min./Max.)* 80,000 to 2,22,000 96,000 to 2,70,000 1,20,000 to 3,30,000 1,32,000 to 3,66,OOC Max. Operating Pressure 10 Tons 6.5 Tons 6.5 Tons 6.5 Tons Max. Tablet Dia 25 mm 16 mm 11.1 mm 11.1 mm Depth of fill 20.5 mm 17.5 m m rnm Upper Punch Penetration 1/8" to 5/16" 1/8" to 5/16" 1/8" to 5/16" 1/8" to 5/16" ( 3.2 to 8 mm) ( 3.2 to 8 mm) (3.2 to 8 mm) (3.2 to 8 mm) Power (Total) 7 KW / 9.5 hip. 7 KW / 9.5 hip. 7 KW 19.5 hp. 7 KW / 9.5 hip. Power Main Electric Motor Power (Feeder Motors 2 NOS.) Overall Dimensions(mm) Overall Dimensions(mm) Net Weight (Approx) Case Dimensions(mm) Gross Weight(Approx) 5.5 KW/ 7.5 HP 50 H~, 3 Ph KW / 0.25 hip. 415 V., * Depending upon material characteristic & available room atmosphere only. 5.5 KW 17.5 HP 50 H~, 3 Ph KW / 0.25 hp. 415 V., Note : Specification and Features of the Machineries are subject to change without any prior notice. 5.5 KW / 7.5 HP KW / 0,25 hp. 415 V., Guard Open (L) X 2300 (W) X 2080 (H) (mm) Guard Close (L) X 1430 (W) X 1750 (H) (mm) 2500 kq 1980 (L) X 2030 (W) X 1900 (H) 2835 Kg 5.5 KW / 7.5 HP 0.19 KW / 0.25 hp. 415 V., It is a high speed Rotary tablet press for higher tablet output, suitable for large batch production. Machine is having a square design with full consideration of GMP standards. All the tablet parameters can be fine tuned during the operation of the machine from outside the tableting zone. The machine is having A.C. variable frequency drive for the main motor. The machine is having A.C. variable frequency drive for force feeding motors, which enables operators to synchronize machine's speed & feed both. The machine is having Electromagnetic clutch arrangements. The machine is having one piece turret of special grade casting. However, three piece turret with SS-304/SS-316 middle plate is also available. (optionally). Electro less nickel plating can also be available to the turret. (optionally). The machine is having center Drive Type Gear Box. The machine is having Helical gear ring to drive the turret. All guards are interlocked for safety.

11 ACCURA ATX-II (WITH PRE COMPRESSION) SINGLE SIDED HIGH SPEED ROTARY TABLET PRESS 37 Stn. D, 45 Stn. B, 55 Stn. BB & 61 Stn. BB TYPE NO. OF STATION TYPE OF TOOLING OUTPUT( TABLETS/HR)*MAXIMUM / MINIMUM MAX. OPERATING PRESSURE-MAIN(KN) MAX. OPERATING PRESSURE- PRE COMP. (KN) MAX. TAB. DIAMETER (MM) MAX. DEPTH OF FILL(MM) UPPER PUNCH PENETRATION MAIN (MM) UPPER PUNCH PENETRATION PRE COMP. (MM) TOTAL POWER (KW/HP) MAIN ELECTRIC MOTOR(KW/HP) FORCE FEEDER ELECTRIC MOTOR (KW/HP) POWER PACK ELECTRIC MOTOR (KW/HP) ATX II - 37 ATX II - 45 ATX II D B BB / / / TO 6 2 TO / / / /1.00 ATX II BB / V/3phase/50Hz 460V/3phase/60Hz 220V/3phase/60Hz ELECTRICS OVER ALL DIMENSIONS (MM) OVER ALL DIMENSIONS (MM) WHEN UPPER GUARDS OPEN (MM) NET WEIGHT(KG) CASE DIMENSIONS (MM) GROSS WEIGHT (KG) 1500 (L) X 1200 (W) X 2000 (H) (GUARD CLOSED) 2220 (L) X 2350 (W) X 2100 (H) (GUARD OPEN ) 2220 (L) x 2530 (W) x 1940 (H) (L) X 1700 (W) X 2150 (H) 2500 * Depending upon material characteristic & available room atmosphere only. Note : Specification and Features of the Machineries are subject to change without any prior notice. All the tablet parameters can be fine tuned during the operation of the machine from outside the tableting zone, with front controls at outside of the machine, having SEIKO dials. The machine is having PRE-COMPRESSION facility. The machine having Hydraulic Power pack. The machine is having electro magnetic clutch and A.C. variable frequency drive for the main motor & for force feeding motors. The machine is having Bottom Driven Force Feeder. All upper guards are interlocked for safety. The control panel is fitted at back side of the machine & the controls on the side panel. Auto tablet rejection & Random sampling during start & stop of the m/c. (Optionally) Servo motor mechanism for tablet thickness / depth of fill (Auto dialing though PLC. (Optionally) CFC control & SCADA also available. (Optionally) PLC-MMI Touch screen. (21 CFR part-11 compliance and having 3 stage password (Optionally)

12 ACCURA PRESS IV (WITH PRE COMPRESSION) DOUBLE SIDED HIGH SPEED ROTARY TABLET PRESS 45 Stn. D', 61 Stn. B, 75 Stn. BB SLUGGING TYPE (For veterinary) DOUBLE ROTARY Machine Type PRESS IV-45 PRESS IV-61 PRESSIV-75 PRESS IV-25-SLG PRESS IV-35-SLG Number of Stations Type of Tooling D B BB SLUGGING SLUGGING Output-Tablets/Hr. (Min./Max.)* 65,000 to 3,25,000 87,840 to 4,39,200 1,08,000 to 5,40,000 (Min.) 36,000 (Max.) 1, 05,000 (Min.) 50,400 (Max.) 1, 45,000 Max. Operating Pressure(Main) 10 Tons 6.5 Tons 6.5 Tons 12 Tons 12 Tons Max. Operating Pressure(Pre) 1 Ton 1 Ton 1 Ton 1 Ton 1 Ton Depth of fill 20 mm 17.4 mm 17.4 mm 30 mm 20 mm Max. Tablet Dia 25 mm 16 mm 11.1 mm 40 mm 30 mm Upper Punch enrty 1.5 to 8 mm 1.5 to 8 mm 1.5 to 8 mm 1.5 to 8 mm 1.5 to 8 mm Power Total 8.75 kw/11.7 HP 8.75 kw/11.7 HP 8.75 kw/11.7 HP Kw / 16.7 HP Kw / 16.7 HP Power Main Electric Motor 7.5 kw / 10 HP 7.5 kw / 10 HP 7.5 kw / 10 HP kw /15 HP 960 RPM, 415 V kw /15 HP 960 RPM, 415 V. Power (Feeder Motors 2 Nos.) 0.19 KW / 0.25 HP 0.19 KW / 0.25 HP 0.19 KW / 0.25 HP 0.19 KW / 0.25 HP 0.19 KW / 0.25 HP Overall Dimension (mm) Guard Open (L) X 2500 (W) X 2275 (H) 2500 (L) x 2500 (W) x (L) x 2500 (W) x 2275 (H) (H) Overall Dimension (mm) Guard Close (L) X 1580 (W) X 1900 (H) 1500 (L) X 1580 (W) X (L) X 1580 (W) X 1900 (H) (H) Net Weight (Approx) 3800 kg 4100 Kg 4100 Kg Case Dimension (mm) 3100 (L) X 3200 (W) X 2450 (H) 3100 (L) X 3200 (W) X (L) X 3200 (W) X 2450 (H) (H) Gross Weight (Approx) 4150 kg 4450 kg 4450 kg * Depending upon material characteristic & available room atmosphere only. Note : Specification and Features of the Machineries are subject to change without any prior notice. All the tablet parameters can be fine tuned during the operation of the machine from outside the tableting zone, with front controls at outside of the machine, having SEIK dials. The machine is having PRE-COMPRESSION facility. The machine having Hydrulic Powerpack for pressure loading and overload release. The machine is having A.C. variable frequency drive for the main motor & for force feeding motors which enables operators to synchronize machine's speed & feed both also The machine is having Electromagnetic Clutch arrangements. The machine is having one piece turret of special grade casting. However, three piece turret with SS-304/SS-316 middle plate is also available (optionally). Electro less nickel plating can also be available to the turret, (optionally). The machine is having Center Drive Type Gear Box & HELICAL GEAR RING to drive the turret. The machine is having excellent BOTTOM DRIVEN FORCE FEEDING SYSTEM for material feeding. Two layer attachment can also be provided, optionally.

13 ACCURA ACT-III HIGH SPEED DOUBLE ROTARY TABLET PRESS 51 STN D Tooling / 65 STN B Tooling / 81 STN BB Tooling Maximum Output-7,77,600 Tablets / Hour EXCHANGEABLE TURRET (AN ACCURA ADVANTAGE) (WITH CFC AND AWC, FACILITY) (WITHOUT CFC AND AWC, ALSO AVAILABLE) TYPE ACT - III 51 ACT - III 65 ACT - III 81 TYPE OF TOOLING D (EU-D. IPT D) B (EU-B. IPT B) BB (EU-B. IPT BB) OUTPUT TABLET / HOUR* 91,800/ 4,90,000 1,17,000 / 6,24,000 1,45,800 / 7,77,600 MAX OPERATION PRESSURE MAIN (KN) MAX OPERATION PRE PRESSURE TAMP (KN) MAX TABLET DIAMETER ROUND (MM) MAX. TABLET THICKNESS (MM) 8.5 MAX DEPTH OF FILL (MM) FOR D & B & BB Tooling D & B & BB Tooling SUITABLE FOR D Tooling UPPER PUNCH ENTRY MAIN (MM) 1 TO 6 UPPER PUNCH ENTRY PRE- COMPRESSION (MM) 1 TO 6 POWER TOTAL (KW/HP) 12.5 KW / 17 HP MAIN ELE. MOTOR (KW/ HP) 11 KW / 15 HP X 1440 RPM PRE.PRESS ROLL ELE MOTOR(KW/HP) 0.12/0.16, 1440 RPM X 2 NOS = 0.24 / 0.32 KW/HP MAIN PRESS ROLL ELE. MOTOR (KW/ HP) 0.12/0.16, 1440 RPM X 2 NOS = 0.24 / 0.32 KW/HP WEIGHT ADJ. ELE MOTOR (KW/HP) 0.12/0.16, 1440 RPM X 2 NOS = 0.24 / 0.32 KW/HP FEEDER ELE. MOTOR (KW/HP) 0.37/0.50, 1440 RPM X 2 NOS = 0.74 / 1.0 KW/HP HOPPER CAPACITY 26 LTR OVERALL DIMENSIONS (CM) 180 L X 145 W X 204 H (WITH CLOSE GUARD) CM OVERALL DIMENSIONS (CM) 339 L X 339 W X 200 H (WITH OPEN GUARD) CM UTILITES * Depending upon material characteristic & available room atmosphere only. Note : Specification and Features of the Machineries are subject to change without any prior notice. 1). SUCTION : CFM 2). COMPRESSED AIR: 5KG /SQ.CM (5 BAR) 3). POWER SUPPLY :- 415 V 3 PHASE, 50 HZ DOUBLE ROTARY TABLET PRESSES WITH EXCHAGABLE TURRET. With Motorized pre compression of 10 Tons. (100 KN) With Motorized main compression of 10 Tons. (100 KN) With Motorized dozer, for precise dept of fill adjustment. With separate operating panel with PLC & MMI color touch screen. With Load cells at pre- compression & main compression With load cells for lower punch tight detection With Auto sampling based on, either time or revolution or Punch no. Vibration free and easy to operate at 80 RPM can have an option for the use of any turret having tooling 51-D or 65- B or 85 BB Reduce the tablet rejection by AWC Provide accurate weight & tablet quality. With auto weight control (A.W.C) With auto rejection, of any single tablet, out of prescribed compaction force limit. With Easy Turret Change facility. Turret Can be changed within a very small time segment. Reduces the product change over time. Bi layer attachment (optional). Supplied with turret resting trolley.

14 ACCURA TABLET DE-BURRING & DE- DUSTING Vibrotype, G.M.P. & Adjustable unit. Noiseless & Maintenance free unit. Electric power requirement less than other machines of the kind. All contact parts made of stainless steel and components can be easily washed and / or sterilised. Tablet conveying route is so geometrically designed that tablet burrs can break easlily. Efficient de-burring & de-dusting and full suction output is concentrated on de-dusting zone for flushing out powder. MODEL ACRA -DB -300 Output (for 8 mm tablet): 5,000 to 2,50,000 tab./hr. Power: 0.25 H.P. / 3 Phase / 1440 RPM Max Tab. Dia: 25 mm. Min Tab. Dia: 5 mm. Overall Dimensions (mm): 400 (L) X 400 (W) X 800 (H) Direct De-Dusting and Transport for any Tablet Press. The De-Dusters can be used with any Tablet Press from any manufacturer. Easy Maintenance and Cleaning: The new tablet De-Duster Model ACDDEL-500 combines gente conveying, burring and De-dusting action with very Low noise level, user friendly and low maintenance, and easy cleaning operations as well. Vibration is limited to the spiral only, this allows rigid assembly Can be easily attached with Metal Detector Unit MODEL AC-DDEL-500 Output (for 8mm tablet)*: 5,000 to 2,50,000 tablet / Hour Conveying Height Differential: 250 mm Max. Tablet Diameter: 25 mm Min. Tablet Diameter: 5 mm Power Supply: 230 V, 50 Hz / 1 Ph

15 ACCURA DUST EXTRACTOR Provided with stainless steel SS 304 contact parts (S.S. 316 optionally). Blower fan is dynamically balanced and the unit is with castor wheels. Overcome dust hazards as well as cross contamination at tablet compression. Minimises mechanical strain, excessive wear of tableting machine -resulting in minimum machine break-downs and punch wears. All inlet manifolds and dust collection tray are of S.S. PVC flexible hoses are plain, i.e. without grooves, from inside for ease in cleaning. 6 nos. inlet manifolds facilitate to connect any Tablet Press Machine and two De-dusting units. MODEL ACRA-DE -150 Suction Capacity: 150 C.FM. Inlet connection: 6 Nos of Dia 1 1/2" (38.1) 1 No of Dia 50 m.m. Electricals motor: 1 H.P RPM 440 V., 50 Hz, 3 Phase Over All dimensions: 660 (L) X 470 (W) X 745 (H) (mm) Case dimensions: 660 (L) X 470 (W) X 745 (H) (mm) Net weight: 80 Kgs. Gross weight: 100 Kgs. Overcome dust hazards as well as cross contamination at tablet compression. Minimises mechanical strain, excessive wear of tableting machine-resulting in mínimum machine break downs and punch wears. All inlet manifolds and dust collection tray are of S.S. PVC flexible hoses are plain, i.e. without grooves, from inside for ease in cleaning. Four inlet manifolds facilitate to connect Clit Press Machine, and two De-dusting units. Air blowing fan is dynamically balanced. Castor wheel provided for ease in mobility. Suction Capacity: 300 CFIVI (500 M3/hr) at 125 mm W. G. Alteration Area: M2 Dust Storage Capacity: 40 Lts. Inlet Manifolds (Four): Did 50 mm 2 Nos. / Did 50 mm 4 Nos. Electricals: 1.5 HP/2880 RPM/44OV/50 CS/3 PH/AC with starter Over All Dimension: 720 (L) X 600 (W) X 1358 (H) (mm) Net Wt. (Approx.): 170 KGS. Gross Wt. (Approx.): 270 KGS. Case Dimensions: 870 (L) X 1650 (W) X 1575 (H)

16 ACCURA COLLOID MILL (cgmp Model, Horizontal Type) Grinding accuracy of 5-10 micron due to the perfectly matched & specially designed Conical shaped stator & Rotor Assly. S. S. Fabricated Square Body on which Machine and Motor both are mounted, in Vertical Type Deluxe Model. All Contact Parts are made out of SS Material. (SS 316 Optionally) Circular Ring Shaped, internally Conical Stator having two different tooth stages, for higher accuracy. Toothed Conical Rotor is Coupled with Belt in Vertical Deluxe Model. Stator & Rotor Assly. is balanced and housed in the Stainless Steel Housing. Extended Bearing Housing specially designed to facilitate fine adjustment of bearing clearances of back lash to avoid metal contact of Rotor in Vertical Deluxe Model. Special designed adjustment of the grinding gap by an exterior screw by means of two handles even during the operation. Water Jacketed Hopper are as standard feature. Higher Capacity Hopper & FLP Model also Available (Optionally) S.S. Trolley with Castor wheels can be provided (Optionally). Model: Vertical Dx Output LTR-/ Hr.: 145 to 1400 Ltrs./Hr. Hopper Capacity: 15 Ltr Motor Type: Vertical, Flange Mounted Motor: 5 H.P. X 2880 RPM X 3 PH.X 440 V. X 50 Hz. A.C. Supply Motor Coupling: Belt Driven Over All Dimensions (mm): 963 (L) X 363 (W) X 1035 (H) Floor Space (mm): 365 x 720 Net Weight (Approx): 165 Kgs Gross Weight (Approx): 255 Kgs

17 ACCURA COMMINUTING MILL GMP point of view machine is provide with S.S. cladding on base, S.S. belt guards, S.S. cover on motor. No exposed painted surface on top of the machine. Motor rails, screws and guide rods are chrome plated. Beaters and shaft are of stainless steel hctk quality and beaters are further hardened and hard chrome plated. Beaters are fitted in a splined shaft. Transmission of heat to the chamber from the bearings is minimum as they are away in separate pillow blocks. This facilitates to some extent in processing of heat sensitive products. Beaters assembly is dynamically balanced which reduces vibration and noise level and increases bearings life. Machine is available in Plain & Water Jacketted model. Flame proof electricals can be provided on demand at extra cost. MODEL: ACRA / COMM. Rotor Speed: rpm. Blades: Swinging type with knife and impact edge Screens: 1.Round hole perforated stainless steel sheet. Electric Motor: 7.5 hp., 1440 RPM., 440 V., 50 Hz., 3 Phase Overall dimensions(mm): 1260 (L) x 720(W) 1560 (H) Net weight: 310 kgs. Output (kg./hour): 25 to 300 (varies according to product, rotor speed & screen) ACCURA MULTI MILL Direction of beaters can be changed by reversible switch. All contact parts can be easily and quickly dismantled and cleaned. Cylindrical screen for higher output. -Castor wheels provided for mobility. Flameproof electrical components can be provided at extra cost. Beaters and scrapper blades of S.S. 304 quality. MODEL: ACRA -MM -200 Output: 50 kgs. To 200 kgs./hour. Rotor assembly dia: 250 mm (approx) Rotor speed: 750/1500/2300/3000 r.p.m. Beaters: 12 knife & impact edges & 2 scrapper blades Screen dimensions: inner diameter -260 mm, ht -135 mm. Motor: TEFC, 3 Hp r.p.m. 440 V, 50 Supply Starter: DOL with reversible switch Material charging height: 1445 mm. (Approx) Overall dimensions(mm): 870 (L) X 965 (W) X 1630 (H) Net weight: 275 kgs. (approx) Gross weight: 425 kgs. (Approx) Case dimensions(mm): 1200 (L) X 1250 (W) X 1860 (H)

18 ACCURA SIFTER Specially designed Hopper. Compact vibratory design for high for high speed & dust free sieving. Noiseless and maintenance free machine. All contact parts and screen made of SS 304 (SS 316 optionally) Low power consumption compared to reciprocating vibratory system. Easy dismantling and cleaning of contact parts. Machine available with flame proof and double / deck options. All contact parts can be easily washed and / or sterilized. Machine is fitted on vibration mounts. Model ACRA/SFT/20"-V ACRA/SFT/30"-V Screen dia. 503 mm 752 mm Capacity /Hour 20 to 200 kgs. 30 to 300 kgs. Charging ht mm without Lid mm without Lid. Discharging ht. 720 mm 670 mm Main electric motor : 1.0 HP / 1440 RPM / 3 Ph. 440 V. / 50 Hz ACCURA OSCILLATING GRANULATOR In compliance with cgmp guidelines. Can be used for dry aspect of the granulation process. Special oscillatory rotor action ensures minimum fines. Contact parts are made of SS 316. Sturdy and durable. Easy to operate / clean / maintain. Noise level minimum. Continuous oscillating stirrers drive. Simple screen holding and tensioning device. Screen Available in different size / durable / cost effective. AC Variable Frequency Drive-OPTIONAL at extra cost. Castors provided for mobility MODEL: ACRA -MM -200 Output: 50 kgs. To 200 kgs./hour. Rotor assembly dia: 250 mm (approx) Rotor speed: 750/1500/2300/3000 r.p.m. Beaters: 12 knife & impact edges & 2 scrapper blades Screen dimensions: inner diameter -260 mm, ht -135 mm. Motor: TEFC, 3 Hp r.p.m. 440 V, 50 Supply Starter: DOL with reversible switch Material charging height: 1445 mm. (Approx) Overall dimensions(mm): 870 (L) X 965 (W) X 1630 (H) Net weight: 275 kgs. (approx) Gross weight: 425 kgs. (Approx) Case dimensions(mm): 1200 (L) X 1250 (W) X 1860 (H)

19 ACCURA OSCILLATING GRANULATOR (Vertical Type- WET & DRY) Model-8'' & Dia. & 12" Dia. Efficient oscillating type Granulator. It is suitable for granulating dry and wet materials. It is quiet in operation and robust and durable in design. A totally enclosed gearbox is mounted on a base pillar at a convenient height. All gears are enclosed in oil bath. No grease or other external lubrication is required. Hopper, the granulating blades both for dry and wet, sieves and all other parts which come in contact with the material to be granulated are made from stainless steel. Separate stirrers for dry and wet granulations are provided and they are so designed that the efficiency of granulation process is optimized in each case. The stirrers can also be replaced quickly and easily. Type ACRA-GRA-8 ACRA-GRA-12 Hopper Size 8" (200 mm) 12" (300 mm) Electric Motor 1.H.P.,1440R.P.M.,440 V., 1.H.P.,1440R.P.M.,440 V., 3 Phase, 50 Cycles, A.C. 3 Phase, 50 Cycles, A.C. Output 200 Kgs/ hr. 650 Kgs/ hr. Overall Dimensions(mm) 736(L)X450(W)X1207(H) 1095(L)X628(W)X1518(H) Case Dimensions(mm) 950(L)X650(W)X1300(H) 1300(L)X850(W)X1700(H) Net weight 250 kgs. 500 kgs. Gross weight 370 kgs. 620 kgs. ACCURA TABLET COATING (cgmp, With Hot Air Blower & Separate Electric Control Panel) Coating Pan Size - 30 DIA, 36 DIA, 42 DIA, 48 DIA, 60 DIA The machine is having study structure of square S.S. square pipes. Base plate is of MS having S.S. cladding. Electric motor & Gear box are directly coupled. Coating pan is mounted directly on Gear box shaft, having convenient mounting angle of 30'. Coating Pan is designed to give quality coating of Tablets. Coating pan is made of SS 304 ( SS 316 Optional). Fixed Baffles or Detachable baffles are provided in coating pan (optionally) to facilitate the tablet mixing during the coating operation which helps in achieving uniform tablet finish. Separate hot air blower unit of adequate heating element is provided with temperature controller. Separate polishing pan also can be provided (optionally). TYPE ACM-30 ACM-36 ACM-42 ACM-48 ACM-60 Coating Pan Size 30 DIA 36 DIA 42 DIA 48 DIA 60 DIA Volumetric Cap. 45 ltrs 75 ltrs 125 ltrs 185 ltrs 300 ltrs Speed RPM... Main Drive Motor 2 H.P./1.5 KW,960 RPM,3 Phase, 415 Volts, 50 Hz. Blower Motor 0.37 KW/ 0.5 H.P., 2800 RPM, 3 Phase, 415 Volts, 50 Hz. Electric Heater 6 KW 6 KW 6 KW 6 K.W 10 K.W

20 ACCURA ROLL COMPACTOR Roll Compactor cgmp 200 X 50, 200 X 70 & 200 X 100 & 200 X 150 Plain & Water Jacketed MODEL ACRA-RC-200/50 ACRA-RC-200/70 ACRA-RC-200/100 ARC-200/150 Output* 5 to 60 Kgs / hour 10 to 100 Kgs / hour 50 to 250 Kgs / hour 50 to 350 Kgs / hour Roll Size 200mm DiaX50 mm(w) 200mm DiaX70 mm(w) 200mm DiaX100 mm(w) 200mm DiaX150 mm(w) Roll Speed (Step Pulley drive) Feed Screw Speed (Through A.C. VFD.) 6 to 25 RPM 6 to 25 RPM 6 to 25 RPM 6 to 22 RPM 5 to 60 RPM 5 to 60 RPM 5 to 60 RPM 10 to 60 RPM Roll Drive Motor 5 HP, 960 RPM, 7.5 HP, 960 RPM, 7.5 HP, 960 RPM, HP, 960 RPM, Electricals Feed Screw Drive Motor Roll Surface 440 V, 3 Phase, 50 Hz 3 HP, 1440 RPM, 440 V, 3 Phase, 50 Hz Corrugated (Std) (A) Smooth (B) Knurled Briquetted (Selection depends upon material characteristics) * Depending upon material characteristic & available room atmosphere only. NOTE : DUE TO CONTINIOUS IMPROVEMENTS IN THE MACHINERIES, SPECIFICATION OF THE MACHINERIES IS SUBJECT TO CHANGE WITHOUT ANY PRIOR NOTICE. Useful for Formulation as well as API Units Available with Corrugated, Knurling & Briquetted Rollers. Contact Parts are made of S.S. 316 except rollers. Very compact design available in Plain, Water Jacketed or Flameproof Model. Screw is driven through AC Variable Frequency Drive. Safety slipping clutch between gearbox and feed screw. Hard chrome plated with mirror finished compacting rolls made of tools steel. Water jacketing arrangement. (optional) Hydraulic power pack system for Rear Roller. (optional)

21 ACCURA DIES & PUNCHES

22 Calle 21 de Marzo No. 21 Col. Santa Cruz Atzcapotzaltongo Toluca, Estado de México, C.P (722) (722)