Southeast Crush & Screen LLC # Fax #
|
|
- Hannah Berry
- 5 years ago
- Views:
Transcription
1 Southeast Crush & Screen LLC # Fax #
2 Transportation Dimensions [47'-2"] 4140 [13'-7"] Feeding Height 3400 [11'-2"] Transport Height 3330 [10'-11"] Discharge Height 3480 [11'-5"] 3800 [12'-6"] 7105 [23'-4"] F1107 Transport Operational Width 2.8m (9'2") 4m (13 2 ) Height 3.4m (11'2") 4.15m (13 7 Length 14.4m (47 2 ) 14.4m (47 2 ) Weight (basic) kg lbs kg lbs
3 SPECIFICATION 1107 MOBILE PRIMARY JAW CRUSHER GENERAL The 1107 is a Mobile Primary Jaw Crusher constructed for high mobility and high output. The feed hopper has hydraulic foldable sides for easy transport and quick set-up on site. A by-pass chute directs undersize through the grizzly to the discharge conveyor. The feed area of the discharge conveyor is fitted with impact bars to absorb shock loads. Ground clearance below discharge conveyor: approx. 300mm (12 ) in transport position. Clearance between moving jaw and discharge conveyor belt: approx. 600mm (24 ) The chassis is of plate type with the emphasis on easy inspection and access to maintenance points. Platforms around the diesel power pack provide access for inspection and service. A rotating warning beacon and a siren provide visual and auditable warning of movement. Two 24 V floodlights are fitted for illumination at night. A control cabinet with all control equipment for the unit is accessible from ground level. Emergency stop push buttons are provided at appropriate places. A level monitor system above the crusher stops the feeder if the crusher is blocked. The design and manufacture of the Fintec 1107 complies with all the directives required for CE marking while the diesel engine complies with EO Emission Regulation 97/68/EC step II.
4 FEEDER STATION The feed material is directly loaded by an excavator into the feed hopper, which has a nominal volume of 7 m 3 (9.2yds 3 ). The feeder is equipped with a grizzly section located at the discharge end for removal of fines. This feature allows the passage of fine material direct to the discharge conveyor, so that it does not pass through the jaw crusher, which has an 1100 x 700mm (44 x 28 ) feed opening. This design makes possible a high production capacity by avoiding the accumulation of fine material (sometimes mud or clay) at the bottom end of the crushing chamber. The layer of fine material separated by the grizzly feeder and by-passed the jaw crusher is fed on to the main conveyor belt before the drop point from the jaw crusher and reduces the impact from the larger stones on the belt, beneath the crusher. The fine material and the crushed product are transported on the product conveyor. As an option, a separate natural fines belt conveyor can take out the natural fines. FEEDER The feeder is a Roxon MGF1040G vibrating grizzly (4.2m x 1.04m) including 1600 mm long grizzly section. This feeder has been specially designed for operation with coarse material and high impact load. The feeder has cassette type grizzly bars and is fitted with HardoxTm 400 liner plates. This feeder has two unbalanced shafts located under the vibrating structure. They rotate in opposite directions, resulting in straight-line motion due to the self-synchronizing effect. The vibrators are oil lubricated and have adjustable counterweights. FEED HOPPER The Feed hopper has a nominal volume of 7m 3 (9.2yds 3 and the Hopper has hydraulic foldable sidewalls, for ease of setup.
5 FEED RATE The hydraulic system enables the operator to control the feed rate, by changing the speed of the vibration motor. This feature is especially useful in order to obtain maximum output from the whole installation. CHUTEWORK Crusher by-pass chute discharges directly on to the main product conveyor, alternatively a chute flap section can be turned by hand for discharging to the natural fines conveyor. CRAWLER TRACKS The Crawler tracks have a length of 3850 mm and track shoe width, is 500 mm. The normal ground pressure is 129 KPa together with a travelling speed of 1,2 km/h. CRUSHER This is a Sandvik single toggle J11 Crusher with a feed opening of 1100mm x 700 mm (44 x 28 ), and consists of: FRAME Rigid one piece welded construction consisting of steel plates and cast carbon steel parts, heat-treated after welding (for internal stress relief), and then precision machined. The simultaneous use of both plate and castings makes it possible to position the weldments in regions of lower mechanical stress. This feature considerably increases the fatigue resistance of the welded frame assembly.
6 SWING AND STATIONARY JAW PLATES These are cast of austenitic manganese steel, with various profiles, specific for each material to be crushed. The dimensions are the same for the stationary and the moving jaw plates. This makes it possible to freely change the position of the jaw plates. The jaw plates are fixed to the crusher's swing jaw and frame by means of wedges and tie bars. SWING JAW This is a heavily ribbed one piece steel casting. Its eccentric movement (throw) causes the jaw plates to crush the material as it is forced down trough the crushing chamber. SHAFT The eccentric shaft for the J11 crushers is a low-alloy steel forging. The eccentric part of the shaft provides the throw of the swing jaw. Precision machined and of ample diameter, it ensures that the bearings have a long useful service life. BEARINGS For extra heavy duty service the roller bearings are of the self-aligning type, protected by labyrinth seals and are grease lubricated. CHEEK PLATES (SIDE LINERS) These plates are made of austenitic manganese steel, and protect the frame against abrasive wear in the region of the crushing chamber. They are bolted to the crusher side plates. Note that the left and right hand cheek plates are identical, and thus reduce the number of different spare part items that have to be stocked.
7 TOGGLE SEATS These wear parts which support the toggle plate, are made of medium carbon steel, and machined in order to ensure the correct dry rolling contact. TOGGLE PLATE This is a nodular iron casting. Its ends rest in the "lubrication-free rolling-contact" toggle seats, thus maintaining the lower part of the swing jaw in the correct position. It takes up most of the compression force generated in the crushing chamber by the swinging movement of the swing jaw. TOGGLE SEAT Made of carbon steel. This component maintains of the rear toggle seat in the correct position. TENSION RAM These connect the bottom of the swing jaw to a tension ram that keeps the toggle plate firmly compressed between the toggle seats. SETTING ADJUSTMENT Fully hydraulic adjustment, wedge type. 40mm-125mm (1 ½ 5 ) CSS with Shim 75mm 175mm (3 7 ) CSS without Shim FLYWHEELS Made of cast steel, their geometry provides a high moment of inertia, thus reducing the dynamic load variations transmitted to the motor. They are fixed to the shaft in a manner that facilitates disassembly, even after a long time in service. Each flywheel is also fitted, with a counter-weight that balances the crusher in the best way possible, reducing horizontal forces to a minimum.
8 LUBRICATION All four bearings (two in the swing jaw bore and two in the frame housings) are protected against the entry of dust by labyrinth type seals combined with V-ring seals. Injecting grease through the grease fittings fills the seals. DRIVE The crusher is powered direct by wedge belt drive via hydrostatic motor. Maximum power output is 140 kw. BELT CONVEYOR The discharge belt conveyor is 1000 mm wide x 11,300 mm long drum centres with the tail section fitted underneath the jaw crusher and crusher by-pass chute. To give maximum ground clearance the tail section of the conveyor is automatically lowered or raised into different positions, depending on if the unit will be crushing or crawling. The clearance underneath the crusher is 300 mm. The drive drum is fitted with rubber to prevent the belt from slipping. Rubber Impact bars is placed in the drop zone underneath the jaw crusher. The discharge height of the main conveyor is 3300mm (10-11 ) POWER PACK A DEUTZ BF 6M 1015 turbo-charged, intercooler six cylinder, diesel engine power pack developing 273 kw (365 hp) at 1900 rpm. Fuel tank volume of 500 litres. Fuel consumption is approx l/h at 75% continuous load. The engine meets the EU Emission Regulation 97/68/EC step II
9 HYDRAULICS One Hydrostatic variable displacement axial piston pump mounted direct to the engine flywheel provides power to the Hydrostatic motor driving the 1107 crusher. One hydraulic variable displacement axial piston pump mounted direct to the Hydrostatic pump provides power to the hydraulic motors driving the following parts: Vibrating feeder Main conveyor Magnetic over band separator (option) Natural fines conveyor (option) Hydraulic set-up system and controls. ELECTRICAL SYSTEM A 24 V DC electric circuit off the engine battery set provides a control system and safety interlock features. Lighting mast with two lamps. An electric control panel is mounted at the side of the unit and emergency drive of the crawlers is made from the hydraulic valves. SAFETY ITEMS Emergency stop push buttons and safety warning decals are provided at appropriate places. A siren is fitted to give aural warning of operation. Safety guards are fitted around all rotating parts. The Fintec 1107 is designed, manufactured and certified according to EU CE- directives.
10 7m 3( (9.2yd 3 ) Hopper with variable speed feeder, remote start/stop and high/low level start/stop. Sandvik new generation single toggle J11 Jawmaster Crusher with a feed opening of 1100 x 700mm (44"x28"). Drive by a Hydrostatic axial piston pump mounted direct to the engine flywheel which provides power to the Hydrostatic motor driving the crusher. A DEUTZ BF 6M 1015 turbo-charged, intercooler six cylinder, diesel engine power pack developing 273 kw (365 hp) at 1900 rpm. Fuel tank volume of 500 litres. Fuel consumption is approx l/h at 75% continuous load. The engine meets the EU Emission Regulation step II Heavy Duty, Plate Design Chassis 1000mm (40") wide main conveyor. With dust suppression Vibrating Grizzly Feeder Roxon MGF1040G with 1600 mm long bar adjustable grizzly bars and Hardox 400 liner plates. The main components are the spring supported vibrating structure, 1.04m wide and 4.1m long and two unbalanced shafts which rotate in opposite directions, resulting in straight-line motion due to the self-synchronizing effect. Optional: 650mm (25") wide side conveyor belt. With 2-way chute to divert to main conveyor. Can be fitted to either side of the machine. 500mm (20") wide, low ground pressure tracks. Optional: Remote control Optional: Magnetic over-band separator 1m
QJ331 Jaw Crusher Features & Benefits Revision
QJ331 Jaw Crusher Features & Benefits Revision 03 08-09-2014 1 Sandvik Mobiles Hopper Feeder Crusher Main Conveyor Controls Engine Tracks Options Benefits Overview 2 Sandvik Mobiles Hopper 2505mm x 4500mm
More informationSOUTHEAST CRUSH & SCREEN LLC
SOUTHEAST CRUSH & SCREEN LLC 615-289-9890 WWW.SECRUSHANDSCREEN.COM SPECIFICATIONS 640 MOBILE SCALPING SCREEN General The is a heavy duty scalping screen designed to work in tandem with our Fintec 1107
More informationUJ440I HD JAW CRUSHER FEATURES & BENEFITS. Rev
HD JAW CRUSHER FEATURES & BENEFITS Rev 1 02-12-14 MODELS AVAILABLE Comfort - standard grizzly feeder Trend - pan feeder and live pre screen Classic - standard grizzly feeder and live under screen 2 Hopper
More informationMobile Crushing and Screening Features and Benefits QH330. Features & Benefits. Sandvik Mining and Construction
Mobile Crushing and Screening Features and Benefits QH330 Features & Benefits Mobile Crushing and Screening Features and Benefits Hopper & Feed Conveyor Hopper Doors Heavy duty hopper sides Box section
More informationQS441 CONE CRUSHER FEATURES & BENEFITS. Rev
CONE CRUSHER FEATURES & BENEFITS Rev 1 23-12-14 Hopper Feeder Crusher Main conveyor Powerpack Controls Tracks Dimensions Options Benefits overview 2 HOPPER DOORS Heavy duty fixed hopper design enables
More informationJ50 Apr. 2011, issue 006 SPECIFICATIONS. McCloskey J50. All specifications are current as of this printing, but are subject to change
SPECIFICATIONS McCloskey J50 1 DESCRIPTION Heavy duty track mounted Crusher with following features: - 1270 (50 ) x 660 (26 ) single toggle jaw. - 350Hp C9 Cat engine. - Track or Track c\w Wheel bogie.
More information428 TRAKPACTOR SPECIFICATION
IMPACT CRUSHER Crusher type: Feed opening: Rotor Width: Rotor Diameter: Crusher frame: Rotor: Blowbars: Impact aprons: Engine pulley: Maximum feed size: Impactor speeds: Lubrication: APPLICATIONS 428 Fixed
More informationJ45 Nov. 2015, issue 003 SPECIFICATIONS. McCloskey J45. All specifications are current as of this printing, but are subject to change
J45 SPECIFICATIONS McCloskey J45 1 DESCRIPTION Heavy duty track mounted Crusher with following features: - 1140 (45 ) x 688 (27 ) single toggle jaw. - 350Hp C9 / C9.3 Cat engine. - Track or Track c\w Wheel
More informationQH331 CONE CRUSHER FEATURES & BENEFITS. Rev Rev
CONE CRUSHER FEATURES & BENEFITS Rev 2 23-03-15 Rev 1 01-12-14 Hopper Feeder Crusher Main conveyor Powerpack Controls Tracks Dimensions Standard features Options Benefits overview 2 HOPPER DOORS Heavy
More information4242SR SPECIFICATION IMPACT CRUSHER APPLICATIONS. Above photograph features a 4242SR fitted with the optional side conveyor and magnet
Above photograph features a 4242SR fitted with the optional side conveyor and magnet IMPACT CRUSHER Crusher type: Feed opening: Rotor Rotor Diameter: Crusher frame: Rotor: Blowbars: Impact aprons: Engine
More information428 TRAKPACTOR SPECIFICATION
Above photograph features a 428 Trakpactor fitted with the optional side conveyor and magnet IMPACT CRUSHER Crusher type: Feed opening: Rotor Width: Rotor Diameter: Crusher frame: Rotor: Blowbars: Impact
More informationQS331 CONE CRUSHER FEATURES & BENEFITS. Rev
CONE CRUSHER FEATURES & BENEFITS Rev 1 23-12-14 Hopper Feeder Crusher Main conveyor Powerpack Controls Tracks Dimensions Options Benefits overview 2 HOPPER DOORS Heavy duty hopper sides 5m³ / 6.5yd³ nominal
More informationPowerscreen Metrotrak HA
Jaw Crusher Specification Metrotrak HA Total weight 27,800kg (61,288lbs) Transport Length 13.12m (43 ) Width 2.4m (7 10 ) Height 3.3m (10 10 ) Working Length 13.1m (42 9 ) Width 3.87m (12 6 ) with dirt
More informationMobile Crushing and Screening Features and Benefits QH330. Features & Benefits. Sandvik Mining and Construction
Mobile Crushing and Screening Features and Benefits QH330 Features & Benefits Mobile Crushing and Screening Features and Benefits Hopper & Feeder Tipping Grid Vibrating double deck grid option Operated
More informationCONE CRUSHER CRUSHER OPTIONS MAXIMUM FEED SIZE
CONE CRUSHER Crusher type: Liners: Standard concave: Adjustment: Control: Concave options: Eccentric option: 1000 Automax Crusher fitted with long throw eccentric. Manganese steel alloy mantle and concave.
More informationPRIMARY MOBILE CRUSHING PLANT
PRIMARY MOBILE CRUSHING PLANT PRIMARY MOBILE PLANT WITH STJ 108 FOLDABLE HOPPER VIB. GRIZZLY JAW CRUSHER DG SET DISC. CONVEYOR VIB. FEEDER REJ. CONVEYOR TRACK CHASSIS PRIMARY MOBILE PLANT WITH STJ 108
More informationJ50 Nov. 2009, issue 000 SPECIFICATIONS. McCloskey J50. All specifications are current as of this printing, but are subject to change
SPECIFICATIONS McCloskey J50 1 DESCRIPTION Heavy duty track mounted Crusher with following features: - 1270 (50 ) x 660 (26 ) single toggle jaw. - 350Hp C9 Cat engine. - Track or Track c\w Wheel bogie.
More informationi54 Sept. 2009, issue 006 SPECIFICATIONS McCloskey i54 All specifications are current as of this printing, but are subject to change
SPECIFICATIONS McCloskey i54 1 DESCRIPTION Heavy duty track mounted Crusher with following features: - Universal 1200mm (47") diameter x 1350mm (53") wide Impactor. - 430Hp C13 Cat engine. - Track or Track
More informationINTRODUCING THE XA400 SPECIFICATION XA400/206
INTRODUCING THE XA400 SPECIFICATION XA400/206 FEATURES The new Terex Pegson XA400 is the most modern plant of its type and is packed with new user friendly features. The very high performance of this new
More information700i TECHNICAL SPECIFICATION. MOBILE JAW CRUSHER With CAT C9 Engine. Technical Specification CRUSHERS. SCREENERS. BULK HANDLING
700i MOBILE JAW CRUSHER With CAT C9 Engine TECHNICAL SPECIFICATION Subject to change without notice. DESCRIPTION: Self-Contained Mobile Jaw Crusher with the following features: 300Hp CAT C9 Tier III Diesel
More informationPowerscreen Metrotrak HA
Jaw Crusher Specification Metrotrak HA Total weight Tier 3: 28,100kg (61,949lbs) Tier 4F: 29,250kg (64,485lbs) Transport Length 13.1m (43 ) Width 2.4m (7 10 ) Height 3.3m (10 10 ) Working Length 13.1m
More informationCRAWLMASTER 1208i THE INTELLIGENT CRUSHING UNIT ON CRAWLERS SANDVIK ROCK PROCESSING
CRAWLMASTER 1208i THE INTELLIGENT CRUSHING UNIT ON CRAWLERS SANDVIK ROCK PROCESSING INTELLIGENCE on crawler tracks What can CRAWLMASTER 1208i do for you? Crawlmaster 1208i is the new generation of the
More information1412 TRAKPACTOR SPECIFICATION
Above photograph features a 1412 Trakpactor fitted the with optional side conveyor and magnet. IMPACT CRUSHER Crusher type: Rotor Width: Rotor Diameter: Feed opening: Crusher frame: Rotor: Blowbars: Impact
More informationJaw Crushers. The Edge In Crushing Power JAW CRUSHERS PORTABLE AND STATIONARY
Jaw Crushers The Edge In Crushing Power JAW CRUSHERS PORTABLE AND STATIONARY OUTPERFORM THE COMPETITION TEREX CEDARAPIDS JAW CRUSHERS DELIVER GREATER VERSATILITY AND PRODUCTIVITY As the demands of business
More informationSandvik UH440i & US440i
Sandvik UH440i & US440i The perfect choice for highly flexible crushing Sandvik UH440i and US440i are the perfect choice for any contractor looking for a highly flexible, mobile secondary crushing unit
More informationBR500JG-1A BR500JG-1A MOBILE CRUSHER BR500JG-1A WITH VIBRATORY GRIZZLY FEEDER
BR500JG-1A WITH VIBRATORY GRIZZLY FEEDER FLYWHEEL HORSEPOWER 228 kw 310 HP @ 1950 rpm OPERATING WEIGHT 57153 kg 126,000 lb BR500JG-1A BR500JG-1A MOBILE CRUSHER BR500JG-1A Mobile Crusher WALK-AROUND With
More informationSPECIFICATION SHEET. R9 JAW CRUSHER R-Version
SPECIFICATION SHEET R9 JAW CRUSHER R-Version R9R Jaw Crusher ROCO R9R Jaw Crusher ROCO R9R Jaw Crusher is suitable for use in all quarry, mining, demolition & recycling industries. The mobile crushing
More informationi44r Jul. 2012, issue 001 SPECIFICATIONS McCloskey i44r All specifications are current as of this printing, but are subject to change
SPECIFICATIONS McCloskey i44r 1 DESCRIPTION Heavy duty track mounted Crusher with following features: - 1050mm (42") diameter x 1100mm (43") wide Impactor. - 350Hp Cat C9 engine. - Track or Track c\w Wheel
More informationR R J-1175 JAW CRUSHER
R R J-1175 JAW CRUSHER Efficiency, Versatility Performance... The Terex Finlay J-1175 is fitted with a 1070mm x 760mm (42" x 30") Jaques crusher chamber and a heavy-duty undercarriage for exceptional on
More informationTECHNICAL DESCRIPTION. Mobile Crushing Plant, Type REMAX 300 on Crawler Chassis (with screen module 12/30-1)
TECHNICAL DESCRIPTION Mobile Crushing Plant, Type REMAX 300 on Crawler Chassis (with screen module 12/30-1) to dimension sheet No. 42 1534 49 A. General technical data 001 Application Feed material: Throughput
More informationPowerscreen Premiertrak 400 / R400 Pre-Screen Jaw Crusher. SPECIFICATION - Rev 2. 01/01/2015
Jaw Crusher SPECIFICATION - Rev 2. 01/01/2015 Specification 400 Pre-Screen R400 Pre-Screen Total weight 48,220kg (106,306lbs)* 48,420kg (106,747lbs)* Transport Length 15.4m (50 6 ) 15.4m (50 6 ) Width
More informationQA451 TRIPLE DECK DOUBLESCREEN FEATURES & BENEFITS. Rev
TRIPLE DECK DOUBLESCREEN FEATURES & BENEFITS Rev 1 09-01-15 Feed hopper Tipping grid Screenbox Main conveyor Engine Tracks Dimensions Standard features Options Benefits overview 2 FEED CONVEYOR 1200mm
More informationPowerscreen Premiertrak 300. Jaw Crusher. SPECIFICATION - Rev 0. 01/02/2017
Powerscreen Premiertrak 300 Jaw Crusher SPECIFICATION - Rev 0. 01/02/2017 Powerscreen Premiertrak 300 Specification Premiertrak 300 Total weight 35,000kg (77,161lbs) *including magnet & dirt conveyor.
More informationI-130 Impact Crusher
R I-130 I-130 Impact Crusher SPECIFICATION: Rotor Size: Ø1270 x 1219mm Ø50 x 48 Net Engine Power: 328kW 440 HP Portability: Tracked Operating Weight: 49,000 kgs* 108026 lbs* *Note: Without one by-pass
More informationPowerscreen 1500 Maxtrak
Powerscreen 1500 Maxtrak Cone Crusher Specification 1500 Maxtrak Total weight 89,000kg (196,211bs) Transport Length 22.0m (72 6 )* Width 3.5m (11 6 )* Height 3.85m (12 8 )* Working Length 23.9m (79 9 )
More informationR R J-1480 JAW CRUSHER
R R J-1480 JAW CRUSHER Power, Performance & Profitability... Introducing the new J-1480 the largest Jaw Crusher in the Terex Finlay crushing range. The J-1480 is fitted with a Terex Jaques 1370mm x 762mm
More informationBR 350 BR350JG-1 BR350JG-1 MOBILE CRUSHER. FLYWHEEL HORSEPOWER 118 kw rpm OPERATING WEIGHT kg
BR 350 BR350JG-1 BR350JG-1 FLYWHEEL HORSEPOWER 118 kw 158 HP @ 2.100 rpm OPERATING WEIGHT 30.000 kg BR350JG M OBILE WALK-AROUND CRUSHER Komatsu's newly designed BR350JG enters into the market as the most
More informationNET HORSEPOWER 257 kw rpm OPERATING WEIGHT kg TREATMENT CAPACITY ton/h BR580JG-1 MOBILE CRUSHER BR580JG-1
NET HORSEPOWER 257 kw 345 HP @ 1.900 rpm OPERATING WEIGHT 49.000-51.000 kg TREATMENT CAPACITY 140-460 ton/h BR 580 MOBILE CRUSHER M OBILE C RUSHER WALK-AROUND The newly designed Komatsu mobile crusher
More informationA TEREX BRAND. Technical Specification. COBRA 260R Horizontal Impact Crusher
A TEREX BRAND Technical Specification COBRA 260R Horizontal Impact Crusher PRINCIPAL COMPONENTS OF THE EVOQUIP COBRA IMPACT CRUSHER PRINCIPLES OF OPERATION Material enters via the crusher opening & slides
More informationUI310+ IMPACT CRUSHER FEATURES & BENEFITS. Rev Rev
IMPACT CRUSHER FEATURES & BENEFITS Rev 0 30-09-16 Rev 2 09-04-15 Introduction Applications Impact crusher Feeder and hopper Wheel mounted High capacity operation Safety features Control Dimensions Standard
More informationPowerscreen Premiertrak 400 & R400. Jaw Crusher. SPECIFICATION - Rev 6. 01/01/2015
Jaw Crusher SPECIFICATION - Rev 6. 01/01/2015 Specification Premiertrak 400 Total weight 45,260kg (99,781lbs) including magnet & side conveyor Transport Length 15.2m (49 10 ) Width 2.8m (9 2 ), 4.3m (14
More informationPowerscreen Premiertrak 300. Jaw Crusher. SPECIFICATION - Rev 4. 01/01/2015
Jaw Crusher SPECIFICATION - Rev 4. 01/01/2015 Specification Premiertrak 300 Total weight 35,180kg (77,558lbs) *including magnet & dirt conveyor. Transport Length 14.6m (47 11 ) Width 2.55m (8 5 ) Height
More informationHorizontal Impactor. SPECIFICATION - Rev 1. 19/10/09
Horizontal Impactor SPECIFICATION - Rev 1. 19/10/09 The Powerscreen Pegson XH320 Horizontal Shaft Impactor is a highly compact tracked crusher designed to reinforce a world class range of tracked machines.
More informationCRC450X PORTABLE CONE PLANT
Terex Minerals Processing Systems Cedarapids CRC450X CRC450X PORTABLE CONE PLANT Unit shown with the following options: right-hand feed conveyor; 45' (13,716 mm) undercrusher conveyor; oversized quick
More informationPowerscreen Premiertrak 400 & R400. Jaw Crusher. SPECIFICATION - Rev 8. 01/01/2017
Jaw Crusher SPECIFICATION - Rev 8. 01/01/2017 Specification Premiertrak 400 Total weight Tier 3: 45,260kg (99,781lbs) including magnet & side conveyor Transport Length 15.37m (49 11 ) Tier 4F: 46,000kg
More informationPowerscreen Premiertrak 600. Jaw Crusher. SPECIFICATION - Rev 2. 01/01/2017
Jaw Crusher SPECIFICATION - Rev 2. 01/01/2017 Specification Premiertrak 600 Total weight 68,875kg (151,843lbs) including magnet & dirt conveyor. Transport Length 17.1m (56 1 ) Width 3.0m (9 10 ) Height
More informationMOBILE CRUSHER. BR580JG-1 With Tier 3 Engine. NET HORSEPOWER 257 kw rpm OPERATING WEIGHT kg 108, ,440 lb
NET HORSEPOWER 257 kw 345 HP @ 1900 rpm OPERATING WEIGHT 49000-51000 kg 108,000-112,440 lb BR580JG-1 With Tier 3 Engine BR 580 JG MOBILE CRUSHER Photo may include optional equipment BR580JG-1 M OBILE C
More informationPowerscreen Premiertrak 400X & R400X. Jaw Crusher. SPECIFICATION - Rev 0. 23/03/2017
Powerscreen Premiertrak 400X & R400X Jaw Crusher SPECIFICATION - Rev 0. 23/03/2017 Specification Total weight Premiertrak 400X Tier 3: 46,300kg (102,274lbs) including side conveyor & magnet Tier 4F: 46,500kg
More informationENGINE POWER 263 kw / rpm OPERATING WEIGHT kg TREATMENT CAPACITY ton/h BR580JG-1 MOBILE CRUSHER BR580JG-1
ENGINE POWER 263 kw / 353 HP @ 1.900 rpm OPERATING WEIGHT 49.000-51.000 kg TREATMENT CAPACITY 140-460 ton/h BR 580 MOBILE CRUSHER M OBILE CRUSHER WALK-AROUND The newly designed Komatsu mobile crusher looks
More informationHORIZONTAL SHAFT IMPACTOR XH250 SPECIFICATION XH250/208
HORIZONTAL SHAFT IMPACTOR XH250 SPECIFICATION XH250/208 XH250 SPECIFICATION - OVERVIEW The TEREX Pegson XH250 Horizontal Shaft Impactor is a highly compact tracked crusher designed to reinforce a world
More informationMinerals. Jaw Crushers CT and CTHT Series
Minerals Trio Jaw Crushers CT and CTHT Series 1 2 Our range of heavy duty Trio jaw crushers are engineered to accommodate even the hardest of materials. Unbeatable crushing performance At Weir Minerals
More informationNET HORSEPOWER 134 kw rpm OPERATING WEIGHT kg 69,450 lb BR380JG-1 BR 380 JG MOBILE CRUSHER. Photos may include optional equipment.
NET HORSEPOWER 134 kw 180 HP @ 2050 rpm OPERATING WEIGHT 31600 kg 69,450 lb BR 380 JG MOBILE CRUSHER Photos may include optional equipment. M OBILE C RUSHER WALK-AROUND The newly designed Komatsu mobile
More informationMOBILE CRUSHER BR380JG-1E0. HORSEPOWER Gross: 149 kw rpm Net: 140 kw rpm OPERATING WEIGHT kg 74,960 lb
HORSEPOWER Gross: 149 kw 200 HP @ 2050 rpm Net: 140 kw 187 HP @ 2050 rpm 34000 kg 74,960 lb BR 380 JG M OBILE C RUSHER WALK-AROUND The newly designed Komatsu mobile crusher looks simple but is very powerful.
More informationLubrication & Maintenance Schedule
REMOVE DIRT AND SPILLAGE FROM AROUND THE CRUSHER. REMOVE DUST AND DIRT FROM CRUSHER FRAME SURFACES. REMOVE DUST AND DIRT FROM DRIVE MOTOR. CHECK FLUID LEVELS IN DIESEL ENGINE (IF EQUIPPED). REFER TO ENGINE
More informationPowerscreen Trakpactor 260
Powerscreen Trakpactor 260 Horizontal Impactor Powerscreen Trakpactor 260 Specification Total weight Trakpactor 260 Standard 27,000kg (59,525lbs) including side conveyor and magnet Transport Length 13.40m
More informationPowerscreen 1000SR. Cone Crusher. SPECIFICATION - Rev
Cone Crusher Specification Total weight 1000SR 38,500kg (84,900lbs) Transport Length 16.9m (55 5 ) Width 3.1m (10 2 ) Height 3.45m (11 4 ) Working Length 16.9m (55 5 ) Crusher type: Powerunit: Width 3.1m
More informationWorld Jaw TEREX JAQUES WORLD JAWS
World Jaw TEREX JAQUES WORLD JAWS High production Aggressive crushing action High strength design Full hydraulic setting adjustment Complete range of jaw profiles World Jaw We have been manufacturing jaw
More informationCMB RS150 Rockstar Cone Crusher Designed, Developed and Manufactured by CMB International
CMB RS150 Rockstar Cone Crusher Designed, Developed and Manufactured by CMB International INTRODUCTION The CMB 150 Rockstar, a modern cast steel all roller bearing cone crusher features hydraulic adjustment
More informationI-140 Impact Crusher SPECIFICATION:
R Impact Crusher SPECIFICATION: Rotor Size: Ø1270mm x 1220mm (Ø50 x 48 ) Net Engine Power: Tier 3 / Stage IIIA: Caterpillar C15 C-15 540hp (403kW) Tier 4i / Stage IV: SCANIA DC-13 500Hp (373kW) Portability:
More informationElectric Drive Jaw Crusher
Electric Drive Jaw Crusher SPECIFICATION - Rev 2. 01/01/2017 Specification Total weight Premiertrak 600E 73,725kg (162,535lbs) including magnet & dirt conveyor. Transport Length 17.1m (56 1 ) Width 3.12m
More informationTerex Minerals Processing Systems JW SERIES JAW CRUSHERS
Terex Minerals Processing Systems JW SERIES JAW CRUSHERS DESIGNED TO DELIVER Terex JW Series We have been manufacturing jaw crushers for 120 years and over this period have gained a reputation for producing
More informationTerex Minerals Processing Systems JW SERIES JAW CRUSHERS
Terex Minerals Processing Systems JW SERIES JAW CRUSHERS DESIGNED TO DELIVER Terex JW Series We have been manufacturing jaw crushers for over 120 years and have gained a well-known reputation for producing
More informationMOBILE CRUSHER. BR380JG-1 With Tier 3 Engine. NET HORSEPOWER 140 kw rpm OPERATING WEIGHT kg 72,090 lb
NET HORSEPOWER 140 kw 187 HP @ 2050 rpm OPERATING WEIGHT 32700 kg 72,090 lb BR380JG-1 With Tier 3 Engine BR 380 JG MOBILE CRUSHER Photos may include optional equipment BR380JG-1 M OBILE C RUSHER WALK-AROUND
More informationPowertrack 800 INTRODUCING THE
Powerscreen International. Dist. Ltd. Coalisland Road, Dungannon, Co.Tyrone, N.Ireland BT71 4DR Tel: +44(0) 2887 740701 Fax: +44(0) 2887 746569 Email: mail@powerscreen.co.uk INTRODUCING THE Powertrack
More information44.3 kw (59.4 HP) at 2100 rpm kg mm DX85R-3. Compact Excavator
44.3 kw (59.4 HP) at 2100 rpm 8540-8600 kg 4175-4725 mm DX85R-3 Compact Excavator All-round versatility and improved fuel efficiency Whatever your application you can rely on the DX85R-3 ideal working
More informationProduct presentation. Lokotrack ST3.8 mobile screen
Product presentation Lokotrack ST3.8 mobile screen 1 Metso Minerals ST3.8 Product Presentation ST458 product presentation ST3.8 Technical specifications - Transport dimensions Dimension Metric English
More informationTel: Fax: INTRODUCING THE. Commander 510
Sales & Rentals LLC 11901 Westport Rd, Louisville, KY 40245 Tel:502 326 9300 Fax:502 326 9305 Email:sales@powerscreensales.com INTRODUCING THE FEATURES Total weight Width (transport) 2.47m (8' 1") Length
More informationFLYWHEEL HORSEPOWER 228 kw rpm OPERATING WEIGHT kg 84,440 lb MOBILE CRUSHER. Photos may include optional equipment.
FLYWHEEL HORSEPOWER 228 kw 306 HP @ 1950 rpm OPERATING WEIGHT 38300 kg 84,440 lb MOBILE CRUSHER Photos may include optional equipment. BR480RG-1 Mobile Crusher WALK-AROUND Komatsu s newly designed BR480RG-1
More informationJW SERIES WORLD JAW. Terex Minerals Processing Systems
JW SERIES WORLD JAW Terex Minerals Processing Systems DESIGNED TO DELIVER Terex JW World Jaw We have been manufacturing jaw crushers for 120 years and over this period have gained a reputation for producing
More informationWith Tier 4 Interim Engine installed. hyundai heavy industries
With Tier 4 Interim Engine installed hyundai heavy industries 1 Pride at Work Hyundai Heavy Industries strives to build state-of-the art earthmoving equipment to give every operator maximum performance,
More informationPowerscreen Trakpactor 320 Horizontal Impactor. SPECIFICATION - Rev
Horizontal Impactor Specification Trakpactor 320 Total weight VGF 35,280kg (77,779lbs)* Total weight PS 38,160kg (84,128lbs)* Transport Length 14.78m (48 6 ) * Width 2.55m (8 4 ) * Height 3.46m (11 4 )
More informationENGINE POWER 149 kw / rpm OPERATING WEIGHT kg TREATMENT CAPACITY ton/h BR380JG-1 MOBILE CRUSHER BR380JG-1
ENGINE POWER 149 kw / 200 HP @ 2.050 rpm OPERATING WEIGHT 32.600-34.000 kg TREATMENT CAPACITY 50-240 ton/h BR 380 MOBILE CRUSHER M OBILE CRUSHER WALK-AROUND The newly designed Komatsu mobile crusher looks
More informationMetso NW Series. Portable crushing & screening plant. Express way to success
Metso NW Series Portable crushing & screening plant Express way to success With Metso IC50C process control, the process can be started and stopped by pressing one single button. Metso NW Series Portable
More informationLokotrack LT200HP. Setting the standards for mobile cone crushing
Lokotrack LT200HP Setting the standards for mobile cone crushing Proven Compact Performance LT200HP has several hundred references from northern arctic conditions to blistering heat of the equator The
More informationLaboratory pellet mill
The pellet MILL FOR the Professionals Laboratory pellet mill - 6 pole motor 18,5 kw max. - Conditioner motor 0,75 kw - Feeder speed can be used with VFD or hydraulic gear drive (0,37 kw) - Die I.D. 200
More informationJW SERIES JAW CRUSHERS
Terex Minerals Processing Systems JW SERIES JAW CRUSHERS www.duoafrica.com.gh Twitter: @Duo_Africa DESIGNED TO DELIVER Terex JW Series We have been manufacturing jaw crushers for over 120 years and have
More informationApron Feeders. TEREX JAQUES APRON FEEDERS Capacities up to 14,500 tph Proven design based on crawler tractor components Custom designed for the duty
Apron Feeders TEREX JAQUES APRON FEEDERS Capacities up to 14,500 tph Proven design based on crawler tractor components Custom designed for the duty Apron Feeders Terex Jaques Apron Feeders use heavy-duty
More informationTOP CAPACITY. TOTAL RELIABILITY.
EN STRENGTH We redefine the compact class! RM 120GO! UNLIMITED POTENTIAL TOP CAPACITY. TOTAL RELIABILITY. 120GO! EN Unlimited Potential TOP CAPACITY. TOTAL RELIABILITY. Outstanding performance and high
More informationTechnical Specification
Powerscreen International. Dist. Ltd. Coalisland Road, Dungannon, Co.Tyrone, N.Ireland BT71 4DR Tel: +44(0) 2887 740701 Fax: +44(0) 2887 746569 Email: mail@powerscreen.co.uk INTRODUCING THE Powertrack
More informationPOWERSCREEN CRUSHING PRODUCT RANGE
POWERSCREEN CRUSHING PRODUCT RANGE KNOWLEDGE IS POWER POWERSCREEN CRUSHING PRODUCT RANGE Powerscreen means different things to different people. For some, it means robust and reliable crushing and screening
More informationPowerscreen Trakpactor 320SR Horizontal Impactor. Specification - Rev 6. 01/01/2017
Horizontal Impactor Specification - Rev 6. 01/01/2017 Specification Trakpactor 320SR Total weight VGF 46,240kg (101,941lbs)* Total weight PS 48,600kg (107,144lbs)* Transport Length 17.58m (57 8 )* Width
More informationHYDROCONE EIGHTEENHUNDRED SERIES - H&S TYPE CONE CRUSHERS
HYDROCONE EIGHTEENHUNDRED SERIES - H&S TYPE CONE CRUSHERS SANDVIK ROCK PROCESSING M HYDROCONE High performance lowest total cost Excellent versatility Full control of the process Easy to handle and maintain
More information623CT. TECHNICAL SPECIFICATION Subject to change without notice.
623CT MOBILE IMPACT CRUSHER with CAT C9-T3 Engine TECHNICAL SPECIFICATION Subject to change without notice. DESCRIPTION: Self Contained Mobile Impact Crusher with the following features: 275Hp CAT C9 Tier
More informationHYDRA-JAW SERIES JAW CRUSHERS SAFE RELIABLE VERSATILE H2238 H2550 H3244 H _Telsmith_Hydra-Jaw_Brochure.indd 1
HYDRA-JAW SERIES JAW CRUSHERS SAFE RELIABLE VERSATILE H2238 H2550 H3244 H3450 142-4257_Telsmith_Hydra-Jaw_Brochure.indd 1 4/15/14 10:13 AM HYDRA-JAW CRUSHERS OVERVIEW T he Telsmith Hydra-Jaw models combine
More informationA TEREX BRAND. Technical Specification. COLT 800 SCREEN 2 Deck Incline Screen
A TEREX BRAND Technical Specification COLT 800 SCREEN 2 Deck Incline Screen SPECIFICATION Total weight: 16,700Kg (36,817lbs) depending on machine specification TRANSPORT Length: 9.22m (30 3 ) Width: 2.5m
More informationBuilt to last, designed to perform
Built to last, designed to perform High performance jaw crusher Easy service and maintenance access Feeding size up to 600 mm Feed opening 1100 x 700 mm C.S.S. min. - max. 55-125 mm granit, 45-125 mm concrete
More informationHYDROCONE EIGHTEENHUNDRED SERIES - H&S TYPE CONE CRUSHERS SANDVIK ROCK PROCESSING
HYDROCONE EIGHTEENHUNDRED SERIES - H&S TYPE CONE CRUSHERS SANDVIK ROCK PROCESSING M HYDROCONE High performance lowest total cost Excellent versatility Full control of the process Easy to handle and maintain
More informationPOWERSCREEN CRUSHING RANGE
POWERSCREEN CRUSHING RANGE KNOWLEDGE POWERSCREEN CRUSHING RANGE IS POWER Powerscreen means different things to different people. For some, it means robust and reliable crushing and screening equipment,
More informationCMB RS185 Rockstar Cone Crusher Designed, Developed and Manufactured by CMB International
CMB RS185 Rockstar Cone Crusher Designed, Developed and Manufactured by CMB International INTRODUCTION CMB, experts in the design and manufacture of efficient and effective cone crushers, have successfully
More informationPowerscreen 1300 Maxtrak Cone Crusher
Cone Crusher Specification 1300 Maxtrak Total weight Tier 3: 48,020kg (105,865lbs) (No Options) Tier 4F: 47,880kg (105,557lbs) (No Options) Transport Length 15.35m (50 4 ) Width 3.0m (9 10 ) Height 3.85m
More informationCRUSH EVERY JOB 2019 PRODUCT CATALOG AMERICAN-MADE INNOVATION SINCE 1966
AMERICAN-MADE INNOVATION SINCE 1966 2019 PRODUCT CATALOG CRUSH EVERY JOB TM 10685 COLUMBUS PARKWAY, ETNA, OHIO USA 43062 CRUSH EVERY JOB TM That s more than just a catch phrase at Machine. It s how we
More informationPOWERSCREEN CRUSHING RANGE
POWERSCREEN CRUSHING RANGE KNOWLEDGE POWERSCREEN CRUSHING RANGE IS POWER Powerscreen means different things to different people. For some, it means robust and reliable crushing and screening equipment,
More informationJ-1175 Dual Power Jaw Crusher
R J-1175 J-1175 Dal Power Jaw Crsher SPECIFICATION: Inlet Opening: 1070mm x 760mm (42 x 30 ) Net Engine Power: Tier 2 / Stage II Eqivalent: Scania DC9 350hp (257kW) Tier 4F / Stage IV: Scania DC9 350hp
More informationSY215C HYDRAULIC EXCAVATOR
SY215C HYDRAULIC EXCAVATOR hydraulic excavator SY215C overview Engine Isuzu AM-4HK1X Power 128 kw /2000 rpm Operating weight 22200 kg Ground Pressure 47 kpa Bucket capacity 0.93 m³ Reliable First-class
More informationM 1700 WASHPLANT SYSTEMS WASHING TECHNICAL SPECIFICATION FEATURES. Fully mobile washing plant. On board hydraulically folding side conveyors
WASHING SYSTEMS TECHNICAL SPECIFICATION M 1700 WASHPLANT FEATURES Fully mobile washing plant On board hydraulically folding side conveyors Capable of producing up to 5 end products Quick set up time Ideally
More informationM 1700 WASHPLANT SYSTEMS WASHING TECHNICAL SPECIFICATION FEATURES. Fully mobile washing plant. On board hydraulically folding side conveyors
WASHING SYSTEMS TECHNICAL SPECIFICATION M 1700 WASHPLANT FEATURES Fully mobile washing plant On board hydraulically folding side conveyors Capable of producing up to 5 end products Quick set up time Ideally
More informationPowerscreen Commander 1400
2 Deck Incline Screen Specification 14ft Hopper (tipping grid) 14ft Hopper (with DDVG) Total weight 20,200kg (44,440 lbs)* 22,660kg (49,852 lbs)* Transport Length 13.5m (44 3 ) 13.28m (43 7 ) Width 2.72m
More informationPowerscreen Chieftain Deck Incline Screen. Specification - Rev /01/2017
2 Deck Incline Screen Specification 14ft Hopper (with grid) wheel 14ft Hopper (with grid) track Total weight 22,000kg (48,502lbs)* 24,900kg (54,895lbs)* Transport Length 16.95m (55 7 ) 15.4m (50 6 ) Width
More information37,6 kw / 50,4 Hp at rpm kg mm DX60R. Compact Equipment
37,6 kw / 50,4 Hp at 2.200 rpm 5.875 kg 3.725-4.145 mm DX60R Compact Equipment Doosan DX60R hydraulic excavator: a new model with novel features The new DX60R hydraulic excavator offers additional value
More informationCrawler Mobile Jaw Crusher
Crawler Mobile Jaw Crusher Operating Instruction Henan Shibo Heavy Machinery Co., Ltd. Overview With long-term accumulation of experience and recommendation from customers, our company targets customer
More information