Heritage Research Group 940 N. Wynn Rd - Oregon, OH Phone (419) Fax (317)
|
|
- Valentine Little
- 5 years ago
- Views:
Transcription
1 CSS-1h Furol 25 C, sec. Residue by Weight, % Cement Mixing Test, % Particle Charge Test ASTM D C, dmm. Solubility, % 25 C ASTM D ASTM D
2 CSS-1hm Furol 25 C, sec. Residue by Weight, % Particle Charge Test C, dmm. Solubility, % 25 C Softening Point F ASTM D ASTM D ASTM D 36-95
3 CSS-1hp Furol 25 C, sec. Residue by Weight, % Particle Charge Test C, dmm. Elastic Recovery, 10ºC, % Solubility, % 25 C Softening Point F ASTM D ASTM D ASTM D ASTM D 36-95
4 A S P H A L T R E P O R T PG TEST Original Binder RESULT SPECIFICATION Flash Point, T48, C Min. Specific Gravity, ASTM D70, 60 C Viscosity, ASTM D4402, 135 C, Pa.s Max. Dynamic Shear, TP5, G*/sinδ, kpa, 10 rad/s, 64 C Min. Phase Angle, degree 63.0 Report Penetration, ASTM D5, 25 C RTFOT Residue Mass Loss, % Max. Dynamic Shear, TP5, G*/sinδ, kpa, 10 rad/sec, 70 C Min. PAV (100 C) Residue) Dynamic Shear, TP5, G*/sinδ, kpa, 10 rad/sec, 25 C 3,000 5,000 Max. Creep Stiffness, TP1, m -12 C Min. Creep Stiffness, TP1, S, Mpa -12 C Max.
5 SAMI Furol 50 C, sec. Residue by Distillation, % Oil by Volume, % Particle Charge Demulsibility, 33 ml, 0.8%, Sodium Dioctyl Sulfosuccinate, % ASTM D Penetration, 25 C, dmm. Force Ductility, 4 C, 40cm, lbs./sq.in. Elastic Recovery, 4ºC, % Softening Point, ºC AASHTO T 300 ASTM D ASTM D 36-95
6 Job Number: 10010AOM Date: 3/23/2015 Company: Description: PASS QB EMULSION REPORT Test on Emulsion Concentrate Method Specification Viscosity, Saybolt Furol at 25 C [77 F] SFS ASTM D Residue, %, min. ASTM D Particle Charge Test ASTM D7402 Sieve Test, %, max. ASTM D Oil distillate, %, max. ASTM D Specific Gravity of residue of recovered latex, min. WE-EM Test on Residue (1) Method Specification Penetration, 25 C [77 F], min. ASTM D5 70 Penetration, 4 C [39.2 F], report ASTM D5 - Elastic Recovery, 10 C [50 F], %, min. ASTM D Test on Emulsion Diluted Method Specification Residue, % ASTM D Sieve Test, %, max. ASTM D Test on Latex Method Specification Specific Gravity, min. ASTM Tensile strength, die C dumbbell, psi, min. ASTM D Swelling in rejuvenating agent, %, max., 48 hours ASTM D471 40% 104 F Modified Intact Film Test on Rejuvenating Agent Method Specification Flash point, COC, F ASTM D92 > 380 Hot Mix Recycling Agent Classification ASTM D4552 See Section II
7 Job Number: 10010AOM Date: 3/23/2015 Company: Description: PASS CR EMULSION REPORT Test on Emulsion Method Specification Viscosity, Saybolt Furol at 50 C [122 F] ASTM D Residue, %, min. ASTM D6997 (1) 65 Particle Charge Test ASTM D7402 Sieve Test, %, max. ASTM D Oil Distillate, %, max. ASTM D Demulsibility, DSS, 35 ml, %, min. ASTM D Specific Gravity of residue of recovered latex, min. WE-EM (5) 1.15 Test on Residue (1) Method Specification Penetration, 25 C [77 F], min. ASTM D5 80 Penetration, 4 C [39.2 F], report ASTM D5 - Elastic Recovery, 10 C [50 F], %, min. ASTM D6084 (2) 45 Test on Latex Method Specification Specific Gravity, min. ASTM Tensile strength, die C dumbbell, psi, min. ASTM D412 (3) 500 Swelling in rejuvenating agent, %, max., 48 hours ASTM D471 (4) 40% 104 F Modified Intact Film Test on Rejuvenating Agent Method Specification Flash point, COC, F ASTM D92 > 380 Hot Mix Recycling Agent Classification ASTM D4552 See Section II
SECTION 916 (Pages ) is deleted and the following substituted: SECTION 916 BITUMINOUS MATERIALS
916 BITUMINOUS MATERIALS. (REV 7-28-03) (FA 1-13-04) (7-04) SECTION 916 (Pages 785-797) is deleted and the following substituted: SECTION 916 BITUMINOUS MATERIALS 916-1 Superpave PG Asphalt Binder: 916-1.1
More informationSuperpave Asphalt Binders
Superpave Asphalt Binders Aging and what they mean to the specification John D Angelo D Angelo Consulting, LLC johndangelo@dangeloconsultingllc.com Stiffness (Response to Load) elastic viscous elastic
More informationOregon Department of Transportation Standard Specifications For Asphalt Materials 2004
Oregon Department of Transportation Standard Specifications For Asphalt Materials 2004 Effective for contracts and purchase orders advertised after January 1, 2004 Revisions - Changes to the 2003 Asphalt
More informationSpecial Provision No. 111S12 July 2017
AMENDMENT TO OPSS 1103, NOVEMBER 16 Special Provision No. 111S12 July 17 OPSS 1103, November 16, Material Specification for Emulsified Asphalt, is deleted in its entirety and replaced with the following:
More informationMATERIAL SPECIFICATION FOR EMULSIFIED ASPHALT
ONTARIO PROVINCIAL STANDARD SPECIFICATION METRIC OPSS 1103 NOVEMBER 07 MATERIAL SPECIFICATION FOR EMULSIFIED ASPHALT TABLE OF CONTENTS 1103.01 SCOPE 1103.02 REFERENCES 1103.03 DEFINITIONS 1103.04 DESIGN
More informationMATERIAL SPECIFICATION FOR EMULSIFIED ASPHALT
ONTARIO PROVINCIAL STANDARD SPECIFICATION METRIC OPSS 1103 FEBRUARY 1996 MATERIAL SPECIFICATION FOR EMULSIFIED ASPHALT 1103.01 SCOPE 1103.02 REFERENCES 1103.03 Not Used 1103.04 Not Used 1103.05 MATERIALS
More informationMATERIAL SPECIFICATION FOR EMULSIFIED ASPHALT
ONTARIO PROVINCIAL STANDARD SPECIFICATION METRIC OPSS.PROV 1103 NOVEMBER 16 MATERIAL SPECIFICATION FOR EMULSIFIED ASPHALT TABLE OF CONTENTS 1103.01 SCOPE 1103.02 REFERENCES 1103.03 DEFINITIONS 1103.04
More informationSECTION 118 ASPHALT MATERIAL
SECTION 118 ASPHALT MATERIAL 118.1 GENERAL REQUIREMENTS Transporting conveyances for asphalt material shall be free of contaminating material. A record of material hauled the previous load in truck transport
More informationDRAFT Jamaican Standard Specification for Bituminous materials
DRAFT Jamaican Standard Specification for Bituminous materials BUREAU OF STANDARDS Notice This is a draft standard and shall be used or referred to as a Jamaican Standard. It is subject to change without
More informationSuperpave Asphalt Binder Specification
Presented by Prof. Hamad I. Al-Abdul Wahhab Civil Engineering Department King Fahd University of Petroleum & Minerals Dhahran, Saudi Arabia 1.7.1 Superpave Asphalt Binder Specification The grading system
More informationCaltrans Implementation of PG Specs. Caltrans. Presentation Overview. HMA in California. Why, When & How? How will if affect YOU?
Caltrans Implementation of PG Specs PG - Performance Graded Presentation Overview Why, When & How? How will if affect YOU? Caltrans Local Agencies Industry Consultants HMA in California ~ 1 Ton HMA/Person/Yr
More informationNEAT ASPHALTS 40-50, 60-70, , , , & Complies to ASTM D 946 & AASHTO M20, BS 3670 DIN 1995
NEAT ASPHALTS 4050, 6070, 80100, 85100, 120150, 180200 & 200300 Complies to 946 & AASHTO M20, BS 3670 DIN 1995 DESCRIPTION PenetrationGrade Asphalt Cement for use in the construction and maintenance of
More informationDMS-9203, Asphaltic Concrete Patching Material (Containerized)
Overview Effective Date: July 1999 July 2004 This specification shall govern for containerized asphaltic concrete mixture intended primarily for cool to cold, wet weather repair of small pavement areas.
More informationSection 4 DMS-9203, Asphaltic Concrete Patching Material (Containerized)
Section 4 DMS-9203, Asphaltic Concrete Patching Overview Effective Date: August 2004 - December 2005. This Specification governs for rapid curing containerized asphaltic concrete mixture intended primarily
More informationSection 5 Specification 5.7 Supply of Asphalt TABLE OF CONTENTS
Section 5 Specification 5.7 Supply of Asphalt TABLE OF CONTENTS 5.7 SUPPLY OF ASPHALT... 1 5.7.1 GENERAL... 1 5.7.2 MATERIALS... 1 5.7.2.1 General... 1 5.7.2.2 Delivery, Handling and Storage... 1 5.7.3
More informationCHARACTERISTICS OF REJUVANATED BITUMEN WITH USED LUBRICATING OIL AS REJUVENETING AGENT
CHARACTERISTICS OF REJUVANATED BITUMEN WITH USED LUBRICATING OIL AS REJUVENETING AGENT KEMAS A ZAMHARI MADI HERMADI CHOY WAI FUN INTERNATIONAL CONFERENCE ON SUSTAINABLE INFRASTUCTURE AND BUILT ENVIROMENT
More informationDMS-9202, Asphaltic Concrete Patching Material (Stockpile Storage)
Overview Effective Date: July 1999 July 2004 This specification shall govern for an asphaltic concrete mixture intended primarily as a cool to cold weather stockpile patching mix for maintenance. It shall
More informationDMS-9202 Asphaltic Concrete Patching Material (Stockpile Storage or Bagged)
Asphaltic Concrete Patching Material (Stockpile Storage or Bagged) Effective Date: May 2017 1. DESCRIPTION This Specification governs for crushed stone asphaltic concrete intended primarily as a cool-
More informationDMS ASPHALTIC CONCRETE PATCHING MATERIAL (STOCKPILE STORAGE)
DMS - 9202 (STOCKPILE STORAGE) EFFECTIVE DATES: AUGUST 2004 APRIL 2010. 9202.1. Description. This Specification governs for an asphaltic concrete mixture intended primarily as a cool to cold weather stockpile
More information- New Superpave Performance Graded Specification. Asphalt Cements
- New Superpave Performance Graded Specification Asphalt Cements 1 PG Specifications Fundamental properties related to pavement performance Environmental factors In-service & construction temperatures
More informationSUPERPAVE BINDER SPECIFICATIONS & SELECTIONS. Superpave Binder Specs & Selections 1
SUPERPAVE BINDER SPECIFICATIONS & SELECTIONS Superpave Binder Specs & Selections 1 New Binder Specification SUPERPAVE Fundamental properties related to pavement performance Environmental factors In-service
More informationWhat s going on with European Specifications?
What s going on with European Specifications? Jean-Pascal PLANCHE - Total Sept. 15-16, 2003, Las Vegas eurobitume Outline Process of European standardization Current specifications Need for changes CEN/TC336
More information3.5. PMA for Airports in India. When Quality Means Profit
Session 3 : Profitable and Sustainable Bitumen Business 3.5. PMA for Airports in India When Quality Means Profit TKSubhaash Technical Manager, Hincol 0. CONTENT 1. Introduction 2. Product Development 3.
More informationImproved Aging Characteristics of Crosslinked Polymer Modified Asphalt Binders
Improved Aging Characteristics of Crosslinked Polymer Modified Asphalt Binders Petersen Asphalt Research Conference Thirty-Seventh Annual Meeting July17-19, 2000 Laramie, WY Presented by Dennis Krivohlavek
More informationMultiple Stress Creep Recovery (MSCR): New Binder Grade Testing and Terminology
Multiple Stress Creep Recovery (MSCR): New Binder Grade Testing and Terminology 2016 AASHTO - Subcommittee On Materials Mick Syslo, P.E. Materials & Research Engineer Nebraska Department of Roads Current
More informationASTM D4. Bitumen Content Qty. Model Description. Related Standards: ASTM D370, E177
ASTM D4 Related Standards: ASTM D370, E77 Bitumen Content H-550 Bitumen soluble in organic solvents set H-550. Gooch crucible H-550.2 Crucible holder H-550.3 Buchner funnel H-550.8 Glass fiber filter H-255
More informationASTM D4. Bitumen Content Qty. Model Description. Related Standards: ASTM D370, E177
ASTM D4 Related Standards: ASTM D370, E77 Bitumen Content H-550 Bitumen soluble in organic solvents set H-550. Gooch crucible H-550.2 Crucible holder H-550.3 Buchner funnel H-550.8 Glass fiber filter H-255
More informationNCHRP Project Short- and Long-Term Binder Aging Methods to Accurately Reflect Aging in Asphalt Mixtures
NCHRP Project 9-61 Short- and Long-Term Binder Aging Methods to Accurately Reflect Aging in Asphalt Mixtures Ramon Bonaquist, P.E. Research Team Ramon Bonaquist - PI Western Research Insititute Jeramie
More informationLouisiana s Experience
ALF Crumb Rubber Modified Asphalt Louisiana s Experience Louisiana Transportation Conference Baton Rouge Louisiana February 9 th, 2009 Chris Abadie Summary of Louisiana ss Experience Eight CRM asphalt
More informationएमआरप एल ग णव नय ण य गश ल उप दन व श:२०१७ MRPL QC LABORATORY
एमआरप एल ग णव नय ण य गश ल उप दन व श:२०१७ MRPL QC LABORATORY PRODUCTS SPECIFICATIONS:2017 INDIAN STANDARD (IS) SPECIFICATIONS FOR DOMESTIC PRODUCTS: 2017 S.No Product Name Specification Number 1 Liquefied
More informationUltra-thin Bonded Wearing Course Performance Update, Minnesota
2009-30 Ultra-thin Bonded Wearing Course Performance Update, Minnesota Take the steps... Research...Knowledge...Innovative Solutions! Transportation Research Ultra-thin Bonded Wearing Course Performance
More informationAC Binder Characterization Containing Crumb Tire Rubber
AC Binder Characterization Containing Crumb Tire Rubber Gaylon L. Baumgardner Paragon Technical Services, Inc. LOUSIANA TRANSPORTATION RESEARCH CENTER SUSTAINABLE MATERIALS FOR PAVEMENT INFRASTRUCTURE:
More informationHari Shankar Singhania Elastomer & Tyre Research Institute, HASETRI, Plot No. 437, R&D Center, Hebbal Industrial Area, Mysuru, Karnataka
Page 1 of 11 CHEMICAL TESTING I. RUBBER AND RUBBER PRODUCTS 1. Polymer/ Elastomeric materials 2. Fillers Heat Loss of carbon black Ash content ASTM D5667 0.1-45 % ISO 247 Dirt Content ASTM D1278 0.1-10
More informationMATERIAL SPECIFICATION FOR LIQUID ASPHALT USED IN SPRAYING, SEALING, AND PRIMING APPLICATIONS
ONTARIO PROVINCIAL STANDARD SPECIFICATION METRIC OPSS.MUNI 1102 NOVEMBER 2016 MATERIAL SPECIFICATION FOR LIQUID ASPHALT USED IN SPRAYING, SEALING, AND PRIMING APPLICATIONS TABLE OF CONTENTS 1102.01 SCOPE
More informationshalechem.com ShaleChem
shalechem.com ShaleChem Shalechem can different types of bitumen in compliance with international standards (ASTM-D3381, AASHTO-M226, EN.) Oxidized Bitumen: Index Standard Oxidized Bitumen Grade 75/30
More informationMATERIAL SPECIFICATION FOR LIQUID ASPHALT USED IN SPRAYING, SEALING, AND PRIMING APPLICATIONS
ONTARIO PROVINCIAL STANDARD SPECIFICATION METRIC OPSS.PROV 1102 APRIL 2017 (FORMERLY OPSS 1102, NOVEMBER 2007) Note: The PROV implemented in April 2017 replaces OPSS 1102 COMMON, November 2007 with no
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
ccredited to Laboratory locations: Schedule of ccreditation United Kingdom ccreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK Unit 1 Rough Hey Road Grimsargh Preston PR2
More informationNew Tools from EN Standards for high performances mixes
New Tools from EN Standards for high performances mixes Evolution of EN standards Towards Performances What about Binders Performances and cold Climate Ex Denmark Ex Canada Ideas for Poland Krakow March
More informationUse of New High Performance Thin Overlays (HPTO)
Northeast Asphalt User/Producer Group Wilmington/Christiana Delaware October 11-12, 2006 Use of New High Performance Thin Overlays (HPTO) Thomas Bennert Rutgers University NJ s s Thin-Lift Materials New
More informationBEARING OILS FOR STEEL PLANTS HP FILM OIL
BEARING OILS FOR STEEL PLANTS HP FILM OIL Special Features: HP FILM OILS are highly refined mineral oils suitable for oil film bearings used in steel plants. The product is blended from solvent extracted
More informationwww.infinitygalaxy.org E x p o r t i n g P r o d u c t s C a t a l o g u e 1. Bitumen Penetration Grade (40/50 50/70 60/70 80/100 85/100) 2. Bitumen Viscosity Grade (VG10 VG20 VG30 VG40) 3. Bitumen Medium
More informationएमआरप एल ग णव नय ण य गश ल आई.एस एस.उप दन व श:२०१ MRPL QC LABORATORY IS PRODUCTS SPECIFICATION:2018. Page 1 of 16
एमआरप एल ग णव नय ण य गश ल आई.एस एस.उप दन व श:२०१ २०१८ MRPL QC LABORATORY IS PRODUCTS SPECIFICATION:2018 Page 1 of 16 INDIAN STANDARD (IS) SPECIFICATION FOR DOMESTIC PRODUCTS: 2018 S. No Product Name Specification
More informationDemand for soft grades of Binder
Binder Modification to soften Grades John D Angelo D Angelo Consulting, LLC johndangelo@dangeloconsultingllc.com Demand for soft grades of Binder There is an increased demand for softer grade asphalt binders
More informationBackground. Asphalt Soluble in petroleum products. Tar Resistant to petroleum products Generally by-product of coke (from coal) production
Background Asphalt Soluble in petroleum products Generally a byproduct of petroleum distillation process Can be naturally occurring Tar Resistant to petroleum products Generally by-product of coke (from
More informationएमआरप एल ग णव नय ण य गश ल वष 2019 क लए प उ!प द# क लए भ रत य म नक QC LABORATORY INDIAN STANDARD FOR PETROLEUM PRODUCTS SPECIFICATION FOR YEAR 2019
एमआरप एल ग णव नय ण य गश ल वष 2019 क लए प उ!प द# क लए भ रत य म नक MRPL QC LABORATORY INDIAN STANDARD FOR PETROLEUM PRODUCTS SPECIFICATION FOR YEAR 2019 Page 1 of 15 BUREAU OF INDIAN STANDARDS (BIS) SPECIFICATION
More informationSAE J300 Viscosity Grades for Engine Oils ISO Viscosity Grade Conversions Viscosity Ranges for AGMA Lubricant Numbers Axle and Manual Transmission
Viscosity Contents Viscosity SAE J300 Viscosity Grades for Engine Oils ISO Viscosity Grade Conversions Viscosity Ranges for AGMA Lubricant Numbers Axle and Manual Transmission Lubricant Viscosity Classification
More informationProducts for Asphalt Testing
Products for Asphalt Testing For over 50 years, CANNON Instrument Company has provided asphalt testing labs with critical testing equipment and reagents including viscometers, flash point testers, constant
More informationUpdate NCHRP Project 9-61 Short- and Long-Term Binder Aging Methods to Accurately Reflect Aging in Asphalt Mixtures
Update NCHRP Project 9-61 Short- and Long-Term Binder Aging Methods to Accurately Reflect Aging in Asphalt Mixtures Ramon Bonaquist, P.E. Research Team Ramon Bonaquist - PI Western Research Institute Jeramie
More informationFHWA Pavements program What s s Happening. John D AngeloD Office of Pavement Technology
FHWA Pavements program What s s Happening John D AngeloD Office of Pavement Technology 1 σ Loads and Layer Stiffness E * Mr M r Mechanistic Analysis Layered Elastic Analysis Strain Calculations at Critical
More informationSULFUR EXTENDED ASPHALT INVESTIGATION - LABORATORY AND FIELD TRIAL
A5EE-151 SULFUR EXTENDED ASPHALT INVESTIGATION - LABORATORY AND FIELD TRIAL Ali Ehsan Nazarbeygi 1, Ali Reza Moeini 2 1 Bitumen and Road Construction Department, Research Institute of Petroleum Industry
More informationBITUTECH RAP & PER HIGH RAP AND WARM-MIX ASPHALT SOLUTIONS. Green Asphalt Technologies LLC. Technology developed by:
BITUTECH RAP & PER HIGH RAP AND WARM-MIX ASPHALT SOLUTIONS BITUTECH RAP & PER UNIQUE COMPOSITION 100% NATURAL MIXTURES OF PLANT EXTRACTS ROSINS & ROSIN ESTERS FATTY ACIDS VEGETABLE OILS UNLIKE AROMATICS
More information294A SUPREME GEAR LUBE NO TACK SAE 140 and ISO GRADES 320, 460, 680
294A SUPREME GEAR LUBE NO TACK SAE 140 and ISO GRADES 320, 460, 680 Supreme Gear Lube No Tack is a multipurpose thermally stable and thermally durable para-synthetic gear lubricant that is recommended
More informationएमआरप एल ग णव नय ण य गश ल आई.एस एस.उप दन व श:२०१ MRPL QC LABORATORY IS PRODUCTS SPECIFICATION:2018. Page 1 of 17
एमआरप एल ग णव नय ण य गश ल आई.एस एस.उप दन व श:२०१ २०१८ MRPL QC LABORATORY IS PRODUCTS SPECIFICATION:2018 Page 1 of 17 INDIAN STANDARD (IS) SPECIFICATION FOR DOMESTIC PRODUCTS: 2018 S. No Product Name Specification
More information% PH Value 2% slurry IS: ph Green Compression Strength Bentonite : Water :10: A.F.S Sand
(Traders Exporters importers & Mfrs. in Heavy Chemicals, Acids, Dyes, Solvents, Auxiliaries, Minerals) No.7, Thiruverkadu Main Road, Near Ambattur Industrial Estate, Ayapakkam, Chennai-600 077 Tamilnadu
More informationFiltration efficiency: 99% or more HEPO2element
High Precision Filter for Liquids Series Filtration efficiency: 99% or more HEPO2element Filtration accuracy: 2, 4, 6 or 13 µm (Filtration efficiency 99%) Membrane element Filtration accuracy: 0.2 or 0.4
More informationThe World Leader in High Performance Signal Processing Solutions. QMI2569 Conductive Ag Glass Adhesive Qualification Data
The World Leader in High Performance Signal Processing Solutions QMI2569 Conductive Ag Glass Adhesive Qualification Data QUALIFICATION TEST RESULTS The following tests have been completed on qualification
More informationREBCO (RUSSIAN EXPORT BLEND CRUDE OIL) SPECIFICATION GOST
REBCO (RUSSIAN EXPORT BLEND CRUDE OIL) SPECIFICATION GOST 51858-2002 Characteristics Units Result Test Method Density (Specific Gravity) @ 20 C g /sm 3 0.870 ASTM D5002 Sulphur Content wt.% 1.8 ASTM D4294
More informationASPHALT 101. Robert B. McGennis, P.E. The HollyFrontier Companies Phoenix, AZ
ASPHALT 101 Robert B. McGennis, P.E. The HollyFrontier Companies Phoenix, AZ The History of Asphalt The HollyFrontier Companies Headquartered in Dallas, TX NYSE: HFC 5 complex/integrated refineries OK,
More informationBasics of test: Sand cylinder of mix is 10 Hz either in stress or strain a target temperature until specimen fails Test uses a
Basics of test: Sand cylinder of mix is tested @ 10 Hz either in stress or strain control @ a target temperature until specimen fails Test uses a standard Ottawa sand 20-30 mesh SHORT HISTORY OF TEST METHOD
More informationC.R. Barger & Sons, Inc.
C.R. Barger & Sons, Inc. Shipping: 123 Pawnook Farm Road Lenoir City TN 37771 Mailing: P.O. Box 370 Kingston TN 37763 Five generations. One goal. Quality precast concrete. NPCA Certified Plant Phone: (865)
More informationGBL-600S. Technical Information. Fluoroelastomers
GBL-600S Technical Information Introduction Viton GBL-600S is a next generation, easy processing, peroxide-cured 68% fluorine fluoroelastomer based on new Advanced Polymer Architecture (APA) technology.
More informationMr. Gabriel Ojeda Fritz-Pak Corporation Phone: (214) Eastover Circle Fax: (214)
December 15, 2011 Mr. Gabriel Ojeda Fritz-Pak Corporation Phone: (214) 221-9494 4821 Eastover Circle Fax: (214) 341-3182 Mesquite, TX 75149 Email: gabrielojeda@fritzpak.com Subject: Final Report (Revised)
More informationCOMPRESSOR OILS HYCOM VDL T 32, 46, 68, 100, 150, 220, 320
COMPRESSOR OILS HYCOM VDL T 32, 46, 68, 100, 150, 220, 320 Special Features: It is specially blended from saturated paraffinic Group II base stocks and selected premium grade of antioxidants, anti-rust,
More informationB-202. Technical Information. Fluoroelastomers
B-202 Technical Information Introduction Viton B-202* fluoroelastomer is a low viscosity, B-type gum polymer that demonstrates improved processing and rheology when compared with existing fluoroelastomers.
More informationFiltration efficiency: 99% or more
High Precision Filter for Liquids Series Filtration efficiency: 99% or more HEPO2element Filtration accuracy: 2, 4, 6 or 13 µm (Filtration efficiency 99%) Membrane element Filtration accuracy: 0.2 or 0.4
More informationSECTION B ASPHALT BITUMEN PAVETEST
SECTION B ASPHALT BITUMEN PAVETEST Bituminous mixture, also known as asphalt mixture, is mainly composed by aggregates and bitumen, an infinite variety of mixtures being possible. This section is divided
More informationRegional Laboratory, Indian Oil Corporation Limited, Korukkupet Terminal, Kathivakkam High Road, Chennai, Tamil Nadu
Regional, Indian Oil Corporation Limited, Korukkupet Last Amended on 07.01.2014 Page 1 of 5 Specific Method Specification against Range of ing / I. PETROLEUM PRODUCTS 1. JetA1, JP5 Acidity, Total P-113
More informationIntroducing HyJet V. The first Type V phosphate ester hydraulic fluid with highest-grade approvals from Airbus and Boeing.
Introducing The first Type V phosphate ester hydraulic fluid with highest-grade approvals from Airbus and Boeing. fire-resistant Type V hydraulic fluid offers wear and corrosion protection and long service
More informationASTM D Standard Specification for Biodiesel Fuel (B 100) Blend Stock for Distillate Fuels
ASTM D 6751 02 Standard Specification for Biodiesel Fuel (B 100) Blend Stock for Distillate Fuels Summary This module describes the key elements in ASTM Specifications and Standard Test Methods ASTM Specification
More informationTex-614-J, Testing Epoxy Materials
Overview Effective Date: January 2001 - July 2002. This method covers various test procedures for epoxy materials specified under the TxDOT Material Specification "DMS-6100, Epoxies and Adhesives." The
More informationOIL PT. Scheme Description. Oils and Fuels Analysis Proficiency Testing Scheme
OIL PT Oils and Fuels Analysis Proficiency Testing Scheme Scheme Description LGC Standards Proficiency Testing 1 Chamberhall Business Park Chamberhall Green Bury, BL9 0AP UK. Telephone: +44 (0) 161 762
More informationLaboratory Certification For. Shakib Dastaggir Construction & Design Company (S-CAD) Laboratory
Laboratory Certification For Shakib Dastaggir Construction & Design Company (S-CAD) Laboratory Lab ID: LCP-006 Issue date: Sept 19, 2016 Expiry date: March 18, 2017 This letter confirms the completion
More information505 ECOSHIELD BIODEGRADABLE DRIP OIL ISO 32, 46 & ISO 68
505 ECOSHIELD BIODEGRADABLE DRIP OIL ISO 32, 46 & ISO 68 EcoShield Biodegradable Drip oil is a fully formulated anti-wear, readily biodegradable, environmentally friendly, ecologically responsive, non-toxic
More informationUSES FOR RECYCLED OIL
USES FOR RECYCLED OIL What happens to your recycled used oil? Used oil, or 'sump oil' as it is sometimes called, should not be thrown away. Although it gets dirty, used oil can be cleaned of contaminants
More informationINDUSTRIAL GEARBOX OILS PARTHAN EP
INDUSTRIAL GEARBOX OILS PARTHAN EP These are premium quality oils manufactured from high quality base stocks fortified with extreme pressure additives, antifoam, antirust and antioxidation agents, thereby
More informationTex-614-J, Testing Epoxy Materials
Overview Effective: August 1999 May 2000. This method covers various test procedures for epoxy materials specified under the TxDOT Material Specification DMS-6100, Epoxies and Adhesives. The test to be
More informationVarious tests and analysis will be carried out at testing laboratory on the received samples such as:
2 Testing Various tests and analysis will be carried out at testing laboratory on the received samples such as: - General Quality Control Test - Special Analysis Tests as requested 2.1 General Quality
More informationCHEZACARB. Conductive Carbon Black for Polymer Compounds SIMPLY IMPROVING EVERYDAY LIFE
CHEZACARB Carbon Black for Polymer Compounds SIMPLY IMPROVING EVERYDAY LIFE CHEZACARB AC COMPOUNDS CHEZACARB Volume resistivity as a function of CB content (extruded sheets) 1E+09 Carbon Black for Polymer
More informationViscometry Rheometry. The Range. ::: Intelligence in Rheometry
Viscometry Rheometry The Range ::: Intelligence in Rheometry Rheometer System Measuring methods Measuring drive Measuring systems Temperature control systems Software Measuring results Special product
More informationuridongne co,. ltd. uridongne co., ltd. Industrial Lubricants
Industrial Lubricants uridongne co,. ltd. Lubricant Research Institute #40 Galji-ro, Namsan-myeon, Gyeongsan-si, Gyeongsangbuk-do, 38573, South Korea TEL : +82-53-857-5900 FAX : +82-53-851-7116 www.euridongne.com
More informationThe Significance of Tests. Petroleum Products. A Report Prepared by A.S.T.M. COMMITTEE D-2. On Petroleum Products and Lubricants PUBLISHED BY
The Significance of Tests of Petroleum Products A Report Prepared by A.S.T.M. COMMITTEE D-2 On Petroleum Products and Lubricants 865.5 ASIZs PUBLISHED BY AMERICAN SOCIETY FOR TESTING MATERIALS 260 S. Broad
More informationGeoscience Testing laboratory (Al Ain)
Soil 1 In-situ Density by Sand Replacement Method Using Large Pouring Cylinder & Small Pouring Cylinder In-place Density Test by Sand Cone Method BS 1 Part ASTM D 1556 Dry Density Moisture Content Relationship
More informationMODULAR USED LUBE OIL RE-REFINING
MODULAR USED LUBE OIL RE-REFINING STP - Studi Tecnologie Progetti Srl Engineering& Contractor P.le Ezio Tarantelli, 97 00144 Rome, Italy stp@stpitaly.eu GENERAL Modular Used Lube Oil Re-refining proposed
More informationThe Importance of Biodiesel Meeting the ASTM D6751 Standard. Barbara E Goodrich Manager, Engine Fluids John Deere Power Systems 6 February 2008
The Importance of Biodiesel Meeting the ASTM D6751 Standard An OEM Perspective on Fuel Quality Barbara E Goodrich Manager, Engine Fluids John Deere Power Systems 6 February 2008 Overview Outline ASTM D6751
More informationRisk-free compaction of Warm Mix Asphalt modified with Evotherm
XXXVII Seminarium Techniczna PSWNA Asfalty wielowymiarowe Paving of Asphalt mix modified with Evotherm in challenging climatical conditions Risk-free compaction of Warm Mix Asphalt modified with Evotherm
More informationHigh-performance slideway oils for machine tools, with excellent demulsification properties
CGLP SLIDEWAY OILS High-performance slideway oils for machine tools, with excellent demulsification properties Description The quality of machined components depends heavily on the accurate feed and accurate
More informationMARV
Nonwoven Geotextile Property Table English Values PROPERTY TEST METHOD UNIT VALUE 311 351 401 451 501 601 701 801 1001 1201 1601 Grab Tensile Strength ASTM D-4632 lb MARV 80 95 115 120 150 160 180 205
More informationSoil Stabilization FIELD REPORT WILL FERGUSON. TINDOL CONSTRUCTION 2335 Viggo Road Beeville, Texas 78102
2016 Soil Stabilization FIELD REPORT WILL FERGUSON TINDOL CONSTRUCTION 2335 Viggo Road Beeville, Texas 78102 TABLE OF CONTENTS SOIL STABILIZATION FIELD REPORT Overview Page 2 Test Pads Specs of Construction
More informationDraft Indian Standard SYN GAS/ AMMONIA TURBO COMPRESSOR LUBRICATING OILS SPECIFICATION
Comments Only BUREAU OF INDIAN STANDARDS Draft Indian Standard Doc:PCD 3(2537)C September 2012 SYN GAS/ AMMONIA TURBO COMPRESSOR LUBRICATING OILS SPECIFICATION Not to be reproduced without the permission
More information#203SW Wind Turbine Oil ISO 220, 320, 460 and 680
#203SW Wind Turbine Oil ISO 220, 320, 460 and 680 Wind Turbine Oil is a para-synthetic extreme pressure gear lubricant that is designed for use in the lubrication of heavily loaded gears and rolling element
More informationPRIMARY. Ergon Asphalt & Emulsions, Inc. Austin, TX HUB - No. Extended. Extended Item Description Est. Qty Unit Price
Section One: Less Than Transport Loads: FOB Origin - Provider Storage, Pick-Up Within Tarrant County: Item Description Est. Qty Unit Unit Unit 1 Emulsions - CRS-2/CRS-2H 27,000 GL 1.38 37,260.00 2 Emulsions
More informationEFFECT OF SUPERPAVE DEFINED RESTRICTED ZONE ON HOT MIX ASPHALT PERFORMANCE
IR-03-04 EFFECT OF SUPERPAVE DEFINED RESTRICTED ZONE ON HOT MIX ASPHALT PERFORMANCE by Jingna Zhang L. Allen Cooley, Jr. Graham Hurley November 2003 EFFECT OF SUPERPAVE DEFINED RESTRICTED ZONE ON HOT MIX
More informationBy Authority Of THE UNITED STATES OF AMERICA Legally Binding Document
By Authority Of THE UNITED STATES OF AMERICA Legally Binding Document By the Authority Vested By Part 5 of the United States Code 552(a) and Part 1 of the Code of Regulations 51 the attached document has
More informationBallot API 1509, Annex G Phosphorus Limits for Universal Oil. Instructions
Instructions Ballot for API 1509, Annex G - Stripped Viscosity Footnote Universal Oils have an API C Category Classification (for Diesel Engine Oils) with an API S Category Classification (for Gasoline
More information4025 Synthesis of 2-iodopropane from 2-propanol
4025 Synthesis of 2-iodopropane from 2-propanol OH I + 1/2 I 2 + 1/3 P x + 1/3 P(OH) 3 C 3 H 8 O (60.1) (253.8) (31.0) C 3 H 7 I (170.0) (82.0) Classification Reaction types and substance classes nucleophilic
More informationPavement Performance Prediction Symposium July 17, 2008 University of Wyoming Laramie, Wyoming
Pavement Performance Prediction Symposium July 17, 2008 University of Wyoming Laramie, Wyoming Acknowledgements: John D Angelo - FHWA FHWA Mobile Asphalt Testing Laboratory Program Chuck Paugh Project
More information5.7.1 Carbon Black in Styrene-Butadiene Rubber Recipe and Evaluation Procedure (D 3191) and Carbon Black Evaluation in Natural Rubber (D 3192)
Table of Contents 1 Introduction 1.1 History 1.2 ASTM D11 Standards 1.3 Purpose 1.4 Economic Savings for Users and Producers Through Test Method Rationalization 1.5 Importance of Quality 1.6 Standard Target
More informationHigh Surface Area Silica. High Performance Tread. STRUKTOL SCA 98 (Tetrasulfide)
Producers of Specialty Chemicals Struktol Company of America 1 E. Steels Corners Road P. O. Box 19 Stow, Ohio 9 www.struktol.com High Surface Area Silica in High Performance Tread with Next Generation
More informationAsphalt Emulsion VOC Testing
Asphalt Emulsion VOC Testing Presentation To PPRA Meeting Florida - 2016 Arlis Kadrmas Presentation Outline Background Why VOC testing of emulsified asphalt? Recovery Procedures used for residue VOC testing
More informationSpecifications of Products
ations of Products General Purpose Oil : White Mineral Oil Kinematic Viscocity 15/4 cst 40 HP-080 0.875 7.85 180 78-25.0 Lubricants and petrochemical applications, textile HS-080 0.864 8.56 158 60-35.0
More information