COMMON RAIL INJECTORS

Transcription

1 COMMON RAIL INJECTORS VERSION 03 UK 04/18 M I L A N O TOOLS and EQUIPMENT Guaranteed 100% satisfied! by Sirini Ferruccio 1 04/18 UK VERSION 03

2 COMMON RAIL INJECTORS DENSO injectors filter replacement SRN REPLACEMENT KIT OF PROTECTOR FILTER ON COMMON RAIL DENSO INJECTORS 2 SRN REPLACEMENT KIT OF DUST PROTECTIVE FILTER «A BARRE» ON COMMON RAIL DENSO INJECTORS SRN REPLACEMENT COMPLETE KIT OF DUST PROTECTIVE FILTERS ON COMMON RAIL DENSO INJECTORS VERSION 03 UK 04/18

3 COMMON RAIL INJECTORS DENSO injectors filter replacement SRN /1 DENSO INJECTORS REPLACEMENT FILTERS # # R R R2AA13H50 3 SRN /1 REPLACEMENT FILTERS «A BARRA» L = 30 mm SRN /2 L = 27 mm # l /18 UK VERSION 03

4 COMMON RAIL INJECTORS Electronical equipment SRN DIGITAL INSULATION AND CONTINUITY TESTERS TO BE USED ON CR PIEZO INJECTORS To save the common rail simulators, is mandatory before checking the PIEZO injectors 4 SRN DIGITAL, HANDY AND ECONOMIC COMPONENTS TESTER TO BE USED ON CR INJECTORS Digital PDA instrument for the inductance measurement (L), Capacity (C), passive components Resistance (R and DCR) VERSION 03 UK 04/18

5 COMMON RAIL INJECTORS Electronical equipment SRN SOFTWARE MANAGEMENT DIAGNOSIS KIT ALLOWS TO CONTROL NOT ONLY THE COMMON RAIL PUMP IN CONDITIONS OF RAIL CLOSED (SIMILAR: Delphi YDT278), BUT ALSO VERIFY THE PRESSURES WITH THE MARCIANTE VEHICLE IN CONDITION OF RAIL OPEN (SIMILAR: Delphi YDT850). SRN UNIVERSAL TESTER FOR THE CONTROL OF COMMON RAIL DIESEL INJECTORS AND GASOLINE INJECTORS BOSCH-DENSO-DELPHI-SIEMENS (VDO) DIESEL AND GASOLINE!!!THIS SIMULATOR ALLOWS TO PROGRAMME MANUALLY VERY SIMPLE AND INTUITIVE THE CORRECT ELECTRIC IMPULSE THAT AFTER SENT TO THE INJECTORS. THE TESTER IS INTELLIGENT BECAUSE BEYOND THE FREE OPERATOR OF PROGRAMMING THE PARAMETERS AND AUTOMATICALLY RECOGNIZES THE TYPE OF INJECTOR. PROGRAMMING IS STARTED BY A SINGLE KNOB THAT CONTROLS THE SOFTWARE 5 SRN MICROSCOPE DIGITAL ZOOM 1000X. COMPATIBLE USB 04/18 UK VERSION 03

6 COMMON RAIL INJECTORS Stage 3 SRN KIT STAGE 3 FOR CONTROL AND CALIBRATION OF COMMON RAIL INJECTORS: BOSCH, DENSO AND DELPHI 6 Kit FASE 3 repair- and testing complex is dedicated to assembling and disassembling Bosch, Denso and Delphi Common Rail injectors according to manufacturer specified steps and mechanical tolerances. The complex offers the ability to measure relevant mechanical tolerances of the injector parts and electrical characteristics of the electromagnet. The assembly/disassembly steps and critical measurement points are presented by convenient step-bystep instructions descriptions and relevant images of the work process itself. VERSION 03 UK 04/18

7 COMMON RAIL INJECTORS High pressure «flexible» hose SRN x2x300mm 14x14 SRN x2x300mm 14x12 SRN x2x300mm 12x12 SRN x2x400mm 14x14 similar: SRN x2x400mm 12x14 similar: SRN x2x400mm 12x12 SRN x2x450mm 12x14 similar: SRN x2x450mm 14x14 SRN x2x500mm 12x14 similar: SRN x2x500mm 14x14 similar: SRN x2x600mm 14x14 similar: SRN x2x600mm 12x12 similar: SRN x2x600mm 12x14 similar: SRN x2x700mm 12x14 SRN x2x700mm 14x14 SRN x2x700mm 12x12 SRN x2x840mm 12x14 similar: SRN x2x840mm 14x14 similar: SRN x2,2x350mm 12x14 similar: *Note: we can make tailor made hoses, with specific cutsomer request 7 High pressure «rigid» hose for VP PUMPS application SRN x2,2x350mm 14x12 similar: SRN x2,2x450mm 14x14 similar: /18 UK VERSION 03

8 COMMON RAIL INJECTORS Wrench SRN HEXAGONAL OPEN WRENCH 15mm SIZE, WITH 3/8 SQUARE CONNECTION SRN HEXAGONAL OPEN WRENCH 17mm SIZE, WITH 3/8 SQUARE CONNECTION SRN HEXAGONAL OPEN WRENCH 19mm SIZE, WITH 3/8 SQUARE CONNECTION SRN HEXAGONAL OPEN WRENCH 25mm SIZE FOR SIEMENS, WITH 1/2 SQUARE CONNECTION SRN HEXAGONAL OPEN WRENCH 27mm SIZE, WITH 1/2 SQUARE CONNECTION SRN HEXAGONAL OPEN WRENCH 29mm SIZE, WITH 1/2 SQUARE CONNECTION SRN HEXAGONAL OPEN WRENCH 30mm SIZE, WITH 1/2 SQUARE CONNECTION VERSION 03 UK 04/18

9 COMMON RAIL INJECTORS Wrench SRN HEXAGONAL OPEN WRENCH 32mm SIZE, WITH 1/2 SQUARE CONNECTION SRN SET OF 6 HEXAGONAL OPEN WRENCHES, SIZE: mm, WITH 3/8 AND 1/2 SQUARE CONNECTIONS SRN WRENCHE to unlock/lock the HEXAGONALE ring-nut into the Bosch CRI injectors Note: with 1/2 square connection SRN WRENCHE to unlock/lock the TORX ring-nut size T10 into the Bosch CRIN injectors Note: with 1/2 square connection SRN WRENCHE to unlock/lock the TORX ring-nut size T12 into the Bosch CRIN injectors Note: with 1/2 square connection 04/18 UK VERSION 03

10 COMMON RAIL INJECTORS Wrench SRN WRENCH to dismount the element on pumps DENSO HP3-HP4 (RIBE 09 WITH SQUARE 1/2 ) SRN WRENCHE to unlock/lock the CRIN Bosch injectors coil nut, SIZE: 27mm - 12 point Note: 1/2 SQUARE CONNECTIONS 10 SRN WRENCHE to unlock/lock the CRIN Bosch injectors coil nut, SIZE: 28mm - 12 point Note: 1/2 SQUARE CONNECTIONS SRN WRENCHE to unlock/lock the CRI Bosch injectors coil nut, SIZE: 29mm - hexagonal Note: 1/2 SQUARE CONNECTIONS SRN WRENCHE to unlock/lock the CRI Bosch injectors coil nut, SIZE: 30mm - hexagonal Note: 1/2 SQUARE CONNECTIONS VERSION 03 UK 04/18

11 COMMON RAIL INJECTORS Wrench SRN WRENCHE to unlock/lock the CR injectors nozzle nut, SIZE: Hexagonal 14mm Note: external hexgonal size 27mm SRN WRENCHE to unlock/lock the CR injectors nozzle nut, SIZE: Hexagonal 15mm Note: external hexgonal size 27mm 11 SRN WRENCHE to unlock/lock the CR injectors nozzle nut, SIZE: Octagonal 16mm Note: external octagonal size 27mm SRN WRENCHE to unlock/lock the CR injectors nozzle nut, SIZE: Hexagonal 17mm Note: external hexgonal size 27mm 04/18 UK VERSION 03

12 COMMON RAIL INJECTORS Wrench SRN WRENCHE to unlock/lock the CR injectors nozzle nut, SIZE: Octagonal 17,5mm Note: external hexgonal size 27mm SRN WRENCHE to unlock/lock the CR injectors nozzle nut, SIZE: Octagonal 19mm 12 Note: external octagonal size 27mm SRN WRENCHE to unlock/lock the CR injectors nozzle nut, SIZE: Octagonal 20mm Note: external hexgonal size 27mm SRN WRENCHE to unlock/lock the CR injectors nozzle nut, SIZE: Octagonal 15mm Note: external hexgonal size 27mm VERSION 03 UK 04/18

13 COMMON RAIL INJECTORS Wrench SRN SET OF WRENCHES to unlock/lock the CR injectors nozzle nut, SIZE: 14, 15, 17, 19mm Note: external hexgonal size 27mm SRN WRENCHE to unlock/lock the CR injectors nozzle nut, SIZE 18B Note: CR SCANIA SRN WRENCHE to unlock/lock the CR injectors nozzle nut, SIZE 18B Note: CR SCANIA SRN WRENCHE to unlock/lock the CR injector nozzle nut, SIZE 16Z. (POINTS) Note: for SCANIA /18 UK VERSION 03

14 EUI - COMMON RAIL - POMPE Wrench SRN WRENCHE to unlock/lock easy the TUBE (HOSE NUT) on BOSCH CR PIEZO Injectors Note: The size is 19-27mm SRN WRENCHE to unlock/lock the cross ring-nut into the CR Siemens injectors 14 Note: with driver SRN WRENCHE to unlock/lock the three pin ring-nut into the Denso CR Injectors Note: with 1/2 square connection SRN /1 PIN FOR WRENCH FOR INJECTOR DENSO Note: for wrench SRN VERSION 03 UK 04/18

15 COMMON RAIL INJECTORS Wrench SRN WRENCHE to unlock/lock the CRI Bosch injectors coil nut, SIZE: 29mm - hexagonal Note: 1/2 SQUARE CONNECTIONS SRN WRENCHE to unlock/lock the CRIN Bosch injectors coil nut, SIZE: 28mm - 12 point Note: 1/2 SQUARE CONNECTIONS 15 SRN SET OF TOOLS FOR ASSEMBLE E DISASSEMBLE INJECTOR CR SCANIA SRN SPECIAL TORX PLUS WRENCH FOR DISMOUNTING OF COMMON RAIL CP3 04/18 UK VERSION 03

16 COMMON RAIL INJECTORS Wrench SRN WRENCH TO DISMOUNT THE INTERNAL RING-NUT OF THE COMMON RAIL INJECTORS CAT, DENSO, PERKINS SRN WRENCH TO DISMOUNT THE INTERNAIL RING-NUT OF THE SOLENOID OF INJECTORS CR DENSO Note: WITH 1/2 SQUARE CONNECTION 16 SRN RATCHET WITH CONNECTION 1/2, 9X12MM FOR DYNANOMETRIC WRENCH SRN DYNAMOMETRIC WRENCH CONNECTION 27MM, MEASURE ENGAGE CONNECTION 9X12MM SRN DYNAMOMETRIC WRENCH CONNECTION 25MM, MEASURE ENGAGE CONNECTION 9X12MM Note: FOR SIEMENS INJECTOR VERSION 03 UK 04/18

17 COMMON RAIL INJECTORS Wrench SRN DYNAMOMETRIC WRENCH CONNECTION 27MM, MEASURE ENGAGE CONNECTION 14X18MM SRN DYNAMOMETRIC WRENCH CONNECTION 29MM, MEASURE ENGAGE CONNECTION 14X18MM SRN DIGITAL DYNAMOMETRIC WRENCH NM 17 Note: KIT INCLUDES RATCHET WRENCH WITH ENGAGE CONNECTION 9X12MM AND FLAT WRENCH 27MM WITH ENGAGE CONNECTION 9X12MM SRN WRENCH 12 FACES TO DISMOUNT THE SOLENOID OF COMMON RAIL INJECTORS CAT, DENSO, PERKINS Note: 27,5MM SRN DYNANOMETRIC WRENCH FOR CONTROLLED BLOCKING FROM 20 TO 100 Nm Note: Measure engage connection 14X18 SRN WRENCHE TO UNLOCK/LOCK THE DENSO INJECTORS COIL NUT, SIZE: 27MM - 6 POINT 04/18 UK VERSION 03

18 COMMON RAIL INJECTORS Wrench SRN POLIGONAL NOZZLE HOLDER WRENCH 21MM FOR DELPHI INJECTORS ON MONDEO AND FORD TRANSIT SRN WRENCH 30MM 12 SIDES FOR DOSMOUNT SOLENOID OF COMMO0N RAIL INJECTORS CRIN WITH CONNECTION 14X18 Note: SIMILAR FOR INJECTORS SRN INJECTION LINE SOCKET 1/2 17MM Note: FOR MERCEDES PUMP VERSION 03 UK 04/18

19 COMMON RAIL INJECTORS Spare parts SRN VALVE FOR INJECTORS COMMON RAIL PIEZO BOSCH SRN /1 PIN FOR INJECTORS COMMON RAIL PIEZO BOSCH SRN VALVE PIEZO SIEMENS 19 SRN BALLS FOR INJECTORS COMMON RAIL BOSCH. DIAMETER 1,33MM. SIMILAR: F00VC05001 SRN BALLS FOR INJECTORS COMMON RAIL BOSCH MULTIJET. DIAMETER 1,50MM SIMILAR: F00VC05009 SRN BALLS FOR INJECTORS COMMON RAIL BOSCH SIEMENS. DIAMETER 3MM. SIMILAR: /18 UK VERSION 03

20 COMMON RAIL INJECTORS Spare parts SRN NOZZLE V0605P144 + NUT FOR INJECTORS SIEMENS VDO (A2C , INJ. 5WS40148-Z) Note: for CITROEN C1-C2-C3, FORD FIESTA V - FUSION, MAZDA 2, PEUGEOT , TOYOTA AYGO SRN NOZZLE M0604P142 + NUT FOR INJECTORS SIEMENS VDO (A2C , INJ. 5WS40149-Z) Note: for FORD FIESTA - FUSION, PEUGEOT , TOYOTA AYGO SRN NOZZLE M0003P153 + NU FOR INJECTORS SIEMENS VDO (A2C , INJ. 5WS40156-Z) Note: for FORD FOCUS C-MAX, PEUGEOT 307, CITROEN C4 C5 SRN NOZZLE M0005P153 + NUT FOR INJECTORS SIEMENS VDO (A2C , A2C , INJ. 5WS40200) Note: for PEUGEOT 307, CITROEN C4 C5 C8 SRN NOZZLE M1001P152 + NUT FOR INJECTORS SIEMENS VDO (A2C , INJ. 5WS40086) Note: for FORD FOCUS C-MAX GALAXY MONDEO III, IV S-MAX SRN NOZZLE M1003P152 + NUT FOR INJECTORS SIEMENS VDO (A2C , A2C , INJ. 5WS40250) Note: for FOR FORD FOCUS C-MAX GALAXY MONDEO III, IV S-MAX VERSION 03 UK 04/18

21 COMMON RAIL INJECTORS Spare parts for pump CP4 SRN VALVE TAPPET SIMILAR: 1462C24999 FOR ALL PUMPS BOSCH CP4 SRN CAMSHAFT FOR PUMP BOSCH CP , SIMILAR: 1466C06025 SRN CAMSHAFT FOR PUMP BOSCH CP , , 508 (VW, SKODA, AUDI). SIMILAR: 1466C ZME1462C00991/506 PRESSURE CONTROL VALVE (ZME) FOR PUMP CP4 506 ZME1462C00987/507 PRESSURE CONTROL VALVE (ZME) FOR PUMP CP4 507 SRN CAMSHAFT FOR PUMP BOSCH CP , , 529,...532,...562, SIMILAR: 1466C /18 UK VERSION 03

22 COMMON RAIL PUMP Spare parts for pump CP4 SRN CAMSHAFT FOR PUMP BOSCH CP ,...646,...659, 669,...673,...685,.. SIMILAR: 1466C06034 SRN CAMSHAFT FOR PUMP BOSCH CP , SIMILAR: 1466C SRN GASKET KIT WITH OIL SEAL FOR BOSCH CP4 PUMP , 507.., 546.., 580 Note: AUDI, SEAT, SKODA,VW SRN GASKET KIT WITH OIL SEAL FOR BOSCH CP4 PUMP ,673 NOTE: AUDI A6/Q5/Q7, VW PHAETON/TOUAREG SRN GASKET KIT WITH OIL SEAL FOR BOSCH CP4 PUMP Similar: 1462c15999 VERSION 03 UK 04/18

23 COMMON RAIL PUMP Spare parts for pump SRN BUSHING FOR PUMP COMMON RAIL CP1 Note: 19X17MM H=15MM SRN BUSHING FOR PUMP COMMON RAIL CP1/CP1H Note: 20X22MM H=20MM SRN BUSHING FOR PUMP COMMON RAIL CP1/CP1H Note: 24X26MM H=20MM SRN BUSHING FOR PUMP COMMON RAIL CP1H NOTE: 21X23MM H=17MM SRN BUSHING FOR PUMP COMMON RAIL CP1H Note: 17X19MM H=20MM 04/18 UK VERSION 03

24 COMMON RAIL PUMP Spare parts for pump SRN BUSHING FOR PUMP COMMON RAIL CP3 Note: 17X19MM H=17MM SRN BUSHING FOR PUMP COMMON RAIL CP3 24 Note: 20X22MM H=22MM SRN BUSHING FOR PUMP COMMON RAIL CP3 Note: 25X28MM H=25MM SRN BUSHING FOR PUMP COMMON RAIL CP3 Note: 30X33MM H=25MM VERSION 03 UK 04/18

25 COMMON RAIL INJECTORS Spare parts, Connectors SRN BACK LEAK CONNECTIONS FOR COMMON RAIL INJECTORS 1 WAY. (10 PIECES) SRN BACK LEAK CONNECTIONS FOR COMMON RAIL INJECTORS 2 WAY. (10 PIECES) SRN BACK LEAK CONNECTION FOR COMMON RAIL INJECTORS DELPHI 25 SRN BACK LEAK CONNECTIONS FOR COMMON RAIL INJECTORS SIEMENS 1 WAY FEMALE (10 PIECES) Note: FOR INJECTORS A2C , A2C SRN BACK LEAK CONNECTIONS FOR COMMON RAIL INJECTORS SIEMENS 1 WAY MALE (10 PCS.) (FORD TRANSIT) Note: FOR INJECTORS , , 5WS40745, , A2C , A2C , BK2Q-9K546-AG SRN KIT BACK LEAK ADAPTERS WITH THREAD FOR DENSO COMMON RAIL INJECTORS (6 PCS) 04/18 UK VERSION 03

26 COMMON RAIL INJECTORS Spare parts, Connectors SRN BACK LEAK CONNECTOR (LONG) FOR COMMON RAIL INJECTORS BOSCH PSA 1 WAY. (10PCS) Note: FORD 1,6 TDI SRN BACK LEAK CONNECTOR LONG FOR COMMON RAIL INJECTORS BOSCH PSA 2 WAY. (10PCS) Note: FORD 1,6 TDI 26 SRN BACK LEAK CONNECTOR FOR INJECTORS COMMON RAIL BOSCH 2 WAYS. (VW CRAFTER - BMW) (5 PCS) Note: INJECTORS SRN BACK LEAK CONNECTIONS FOR COMMON RAIL INJECTORS DELPHI 1 WAY. (5PCS) Note: VW SRN BACK LEAK CONNECTIONS FOR COMMON RAIL INJECTORS DELPHI 2 WAY. (5PCS) Note: VW VERSION 03 UK 04/18

27 COMMON RAIL INJECTORS Spare parts, Connectors SRN BACK LEAK CONNECTOINS FOR COMMON RAIL SIEMENS 1 WAY (10PZ) Note: VOLVO/PEUGEOT SRN BACK LEAK CONNECTOINS FOR COMMON RAIL SIEMENS 2 WAY (10PCS) SRN BACK LEAK CONNECTOINS FOR COMMON RAIL PIEZO BOSCH 2 WAY (10PCS) 27 SRN WAYS PLASTIC CONNECTION SIEMENS, DIAM. 4MM (10PCS) SRN CONNECTIONS FOR DELPHI INJECTORS Note: FOR INJECTORS FORD, RENAULT, GRUPPO PSA SRN CONNECTIONS FOR BOSCH INJECTORS 2 WAYS 04/18 UK VERSION 03

28 COMMON RAIL INJECTORS Spare parts, Connectors SRN CLUMPIMG SADDLE VDO SIEMENS, (10PCS) Note: SIMILAR Z, INIETTORI: 5WS40148-Z EURO 3, 5WS40149-Z EURO 4 SRN CLUMPIMG SADDLE VDO SIEMENS, (10PCS) Note: SIMILAR Z, INIETTORI: 5WS Z CLASS 4, 5WS40156-Z CLASS 5 28 SRN CLUMPIMG SADDLE VDO SIEMENS, (10PCS) Note: SIMILAR Z, INJECTORS: 5WS40000-Z SRN CLIP WASTE JOINT INJECTOR COMMON RAIL DENSO SRN HOLDER FOR COMMON RAIL INJECTOR BOSCH (10PCS) SRN GASKET KIT FOR COMMON RAIL INJECTORS Note: SIMILAR F00VC99002 SRN COMMON RAIL INJECTORS REPAIR KIT Note: BOSCH VERSION 03 UK 04/18

29 COMMON RAIL INJECTORS Varie, Raccordi, Connettori SRN Back Leack connector with valve, for Bosch PIEZO injectors Note: Valve inside in the connector SRN Back Leack connector, for CODING in Delphi CR injectors 29 SRN CR Injectors back leack connectors and adapters set and test tube measurments set Note: Universal and complete set SRN CR Injectors back leack test tube measurments set Note: Without beack leak connectors 04/18 UK VERSION 03

30 COMMON RAIL INJECTORS Washer copper SRN KIT FOR BASE WASHER COPPER FOR INJECTORS COMMON RAIL Note: 15 SIZE, 1112 PCS KIT INCLUDED THE NEXT SIZE OF THE SHIM: SRN /1 SHIM SIZE: 13X7,3X1,5MM PIEZO BOSCH CR (REF. F00VP01004) Note: AUDI, VW. (100PCS) SRN /2 30 SHIM SIZE: 13X7,3X2,5MM DELPHI (REF F =F00VC17505) Note: AUDI A6, SKODA, SEAT, VW. (50PCS) SRN /3 SHIM SIZE: 14X7,3X1,6MM DELPHI (REF =850B=850E) Note: FORD MONDEO, FORD FOCUS CITROEN. (100PCS) SRN /4 SHIM SIZE: 14X7,3X1,8MM DELPHI Note: FORD. (100PCS) SRN /5 SHIM SIZE: 14X7,3X2MM BOSCH CR (REF A=F00VP01008) Note: KIA, PAJERO. (50PCS) SRN /6 SHIM SIZE: 15X7,5X0,5MM (REF = ) Note: NISSAN. (100PCS) SRN /7 VERSION 03 UK 04/18 SHIM SIZE: 15X7X1MM (REF ) Note: MAN, NEF, CAT. (100PCS)

31 COMMON RAIL INJECTORS Washer copper SRN /8 SHIM SIZE: 15X7,3X1,5MM PIEZO BOSCH CR WITH STEP (REF =F00RJ01086) Note: IVECO, ISUZU. (50PCS) SRN /9 SHIM SIZE: 15X7,3X1,5MM CONICAL. (REF ) Note: MERCEDES, FIAT, SIEMENS/VDO. (100PCS) SRN /10 SIZE: 15X7,3X2MM. (REF. F00VC17504) Note: IVECO, FIAT, BMW. (50PCS) SRN /11 SHIM SIZE: 15X7,3X2,5MM SIEMENS, BOSCH. (REF ) Note: FORD, PSA. (100PCS) SRN /12 31 SHIM SIZE: 15X7,3X3MM. (REF C) Note: RENAULT. (100PCS) SRN /13 SHIM SIZE: 15,6X8,1X2MM BOSCH CR (REF =821017=821776) Note: OPEL 1,7 TDCI. (50PCS) SRN /14 SHIM SIZE: 16,5X9X1,5MM Note: CUMMINS, SCANIA. (50PCS) SRN /15 SHIM SIZE: 13,45X7,5/10X2MM. (REF. RF2A-13-H51A) Note: MAZDA. (12PCS) 04/18 UK VERSION 03

32 COMMON RAIL INJECTORS PUMP Tools SRN UNIVERSAL TOOLS FOR MOUNT/DISMOUNT COMMON RAIL INJECTORS SRN SPECIAL VICE WITH FLANGE FOR REPAIR COMMON RAIL PUMP 32 SRN UNIVERSAL TOOLS FOR MOUNT/DISMOUNT INJECTOR- PUMP EUI Note: FOR BOSCH, DELPHI, CATERPILLAR CRIN; BOSCH, SIEMENS-VDO CRI; BOSCH AND DELPHI PLD CRIN SRN ADAPTOR FOR PRESSURE CONTROL REGULATOR COMMON RAIL BOSCH (DRV MODEL WITH THREAD 24X1,5)...DRV and similar... SRN DUMMY REGULATOR FOR PRESSURE CP1 BOSCH SIMILAR: DRV VERSION 03 UK 04/18

33 COMMON RAIL INJECTORS Extractors SRN INTERNAL PULLER FOR BOSCH COMMON RAIL INJECTORS M17X1 WITH CONNECTOIN 14X1,5 SRN EXTRACTOR FOR EXTERNAL FOR BOSCH COMMON RAIL INJECTORS M27X1 WITH CONNECTOIN 14X1.5 Note: TO BE ASSEMBLED AT THE PLACE OF THE SOLENOID 33 SRN INTERNAL PULLER FOR VDO SIEMENS COMMON RAIL INJECTORS M25X1 WITH CONNECTOIN 14X1,5 Note: TO BE ASSEMBLED AT THE PLACE OF THE PIEZO SOLENOID SRN INTERNAL PULLER FOR DENSO COMMON RAIL INJECTORS M20X1 WITH CONNECTOIN 14X1,5 Note: R010 04/18 UK VERSION 03

34 COMMON RAIL INJECTORS Extractors SRN EXTRACTOR FOR CP4 INJECTION PUMP ON BMW SERIE 1 SRN EXTRACTOR DOUBLE CONNECTION FOR EXTRACTION COMMON RAIL BOSCH INJECTORS. (27X1, 17X1) 34 Note: TO BE USED WITH SRN OR SRN /1 SRN EXTRACTOR FOR COMMON RAIL DENSO INJECTORS 25X0.5 Note: TOYOTA, MAZDA SRN EXTRACTOR FOR COMMON RAIL DENSO INJECTORS 25X0.75 VERSION 03 UK 04/18

35 COMMON RAIL INJECTORS Extractors SRN PULLER FOR DISMOUNT ZME BOSCH CP4, IMV DELPHI SRN PULLER FOR DISMOUNT ZME BOSCH CP3/CP1H SRN PULLER FOR DISMOUNT ZME CONTINENTAL/VDO SRN PULLERS KIT FOR DISMOUNT ZME CP4/CP3/CP1H/DELPHI- IMV/CONTINENTAL VDO 04/18 UK VERSION 03

36 COMMON RAIL PUMPS Wrench SRN WRENCH TO DISMOUNT THE ELEMENT ON PUMPS DENSO HP3-HP4 Note: RIBE 09 WITH SQUARE 1/2 SRN HEXAGONAL WRENCH 28MM FOR DISMOUNT PUMP SENSOR CP1 SIEMENS 36 SRN SET OF WRENCH TORX WITH HOLE, 6 POINTS, 7 PIECES Note: measures T10 - T15 - T20 - T25 - T27 - T30 - T40 SRN SET OF WRENCH, 5 POINTS, 7 PIECES Note: measures 2-2,7-3,3-4,3-4,9-5,5-6,3 SRN WRENCH FOR VALVE 1467C45003 FOR CP4 PUMP VERSION 03 UK 04/18

37 EUI COMMON RAIL INJECTORS Pullers - Extractors SRN Bosch CR Injectors PULLER. First remove the coil, second remove the hexagonal ring-nut and than fix the puller into the injector body Note: Internal puller with thread size 17x1mm SRN Bosch CR Injectors PULLER. Remove the coil and than fix the puller onto the injector body Note: External puller with thread size 27x1mm SRN Bosch CR Injectors EXTRACTOR for DISMANTING the injectors from the cylinder block head 37 Note: Injector could be extracted either with hydraulic jack or with slide hammer SRN PULLER BLOW FOR NOZZLE HOLDERS (M22X1,5), LENGTH 340 MM + BUSHING F14X1.5 Note: THE NAKED ROD HAS THREAD M14X1.5 SRN /1 PULLER BLOW FOR NOZZLE HOLDERS (M22X1,5), LENGTH 340 MM + 4 BUSHING F14X1.5; F12X1,5; F14x1,25 AND F27X1 Note: SCREWING THE RING UP TO THE BUSHING THE EXTRACTOR FROM THE JOINT BECOMES FIXED. THE NAKED ROD HAS THREAD M14X1.5 04/18 UK VERSION 03

38 COMMON RAIL INJECTORS Tools SRN REAMERS KIT FOR CLEANING THE SEAT OF INJECTORS IN THE ENGINE Note: INCLUDING ONE REAMER FOR CLEANING THE FRONT SIDE OF NOZZLE NUT 38 SRN UNIVERSAL ADAPTOR KIT FOR TEST COMMON RAIL INJECTORS (CRIN) Note: SUITABLE FOR BOSCH TRUCK INJECTORS, DENSO TRUCK INJECTORS, DELPHI SMART INJECTORS SRN SET TO CONTROL LEAKING OF VALVE/BALL FOR BOSCH CR INJECTORS VERSION 03 UK 04/18

39 COMMON RAIL SRN BRUSCH SET IN STEEL/COOPER/NYALON TO CLEAN NOZZLEHOLDER SEAT, ENGINE-HEAD AND PLUGS (38PCS) SRN DIESEL INJECTION SEAT CLEANER SET 39 SRN REAMER TO CLEAN NOZZLE INJECTOR SEAT DIAM. 15,5MM SRN EXTRACTOR KIT FOR INJECTION PUMP 04/18 UK VERSION 03

40 COMMON RAIL INJECTORS Tools SRN TOOLS TO EXTRACT/INSERT FIBER RING, DIAM.8 FOR COMMON RAIL BOSCH CRI INJECTORS + SOME CRIN Note: COMPLETE KIT OF VALVE / FUNGHETTO INSERTER 40 SRN TOOLS TO EXTRACT/INSERT FIBER RING, DIAM. 7,5 FOR COMMON RAIL BOSCH CRIN INJECTORS Note: COMPLETE KIT OF VALVE / FUNGHETTO INSERTER SRN UNIVERSAL TOOLS TO EXTRACT/INSERT FIBER RING FOR COMMON RAIL BOSCH CRIN AND CRI INJECTORS Note: COMPLETE KIT OF VALVE / FUNGHETTO INSERTER VERSION 03 UK 04/18

41 COMMON RAIL INJECTORS SRN ANTIMAGNETIC INOX PLIERS SET FOR INJECTORS CR Note: WITH INVERSE OPENING + WITH SHAPED ENDS SRN /1 ANTIMAGNETIC INOX PLIERS FOR INJECTORS CR Note: INVERSE OPENING 41 SRN /2 ANTIMAGNETIC INOX PLIERS FOR INJECTORS CR Note: SHAPED ENDS SRN /3 ANTIMAGNETIC INOX PLIERS FOR INJECTORS CR Note: STRAIGHT ENDS 04/18 UK VERSION 03

42 COMMON RAIL INJECTORS Blocks Adapters SRN ADAPTER FOR TESTING SIEMENS VDO COMMON RAIL INJECTORS Note: FORD SRN ADAPTER FOR TESTING DENSO COMMON RAIL INJECTORS. DIAM. 24MM 42 SRN ADAPTER FOR TESTING DENSO COMMON RAIL INJECTORS. DIAM. 18,5MM SRN ADAPTER FOR TESTING DEUTZ BOSCH TRUCK INJECTORS. DIAM. 21MM Note: VERSION 03 UK 04/18

43 COMMON RAIL Blocks Adapters SRN ADAPTER FOR TESTING CURSOR9 TRUCK INJECTORS. DIAM. 35MM Note: SRN ADAPTER FOR TESTING BOSCH MTU TRUCK INJECTORS. DIAM. 26MM 43 SRN ADAPTER FOR TESTING SCANIA 4 PIN TRUCK INJECTORS. DIAM. 35MM SRN UNIVERSAL ADAPTOR KIT FOR TEST COMMON RAIL INJECTORS (CRIN) SUITABLE FOR: BOSCH TRUCK INJECTORS, DENSO TRUCK INJECTORS, DELPHI SMART INJECTORS 04/18 UK VERSION 03

44 COMMON RAIL Blocks Adapters SRN UNIVERSAL ADAPTER FOR FIXING COMMON RAIL INJECTORS IN VISE SRN UNIVERSAL ADAPTER FOR FIXING DENSO COMMON RAIL INJECTORS IN VISE 44 SRN DEVICE FOR FILLING THE PIEZO BOSCH CR INJECTORS AMPLIFIER VERSION 03 UK 04/18

45 COMMON RAIL - PUMPS Bracket Flange SRN Test bench flange for Bosch, CP3 MAN CR pump Note: to be use with SRN SRN Test bench flange for Bosch, CP3 MAN CR pump Note: to be use with SRN SRN Test bench flange for Bosch, VE and CR pumps, Ø50mm, Ø60mm Note: to be use with SRN SRN Test bench flange for Bosch, CR Mercedes pump Ø69,5mm Note: to be use with SRN /18 UK VERSION 03

46 COMMON RAIL - PUMPS Bracket Flange SRN Test bench flange for Bosch, CR21 pumps, Ø107mm Note: to be use with SRN SRN Test bench flange for Bosch, CP4 pumps Ø50mm 46 Note: to be use with SRN SRN Test bench flange for Bosch, CP4 HS2 ( ) pumps, Ø50mm Note: to be use with SRN SRN Test bench flange for Denso, HP2-HP3 pump Ø50mm Note: to be use with SRN VERSION 03 UK 04/18

47 COMMON RAIL - TRADITIONAL COUPLINGS Couplings SRN Test bench Coupling made with 11 splines for CR MAN pump Note: coupling similar to but with two teeth made SRN Test bench Coupling grove size 8x18mm for CR Pumps MB and Siemens CR Note: coupling with two teeth SRN Test bench Coupling grove size 9x20mm for CR Pumps Renault CR Note: coupling with two teeth SRN Test bench Coupling grove size 10x21,6mm for CR Pumps Siemens Peugeot BOXER 2,2 Note: coupling with two teeth SRN Test bench Coupling cone size 24mm for Bosch CR CP3 Pumps Note: coupling with two teeth without puller nut 04/18 UK VERSION 03

48 TOOLS FOR TEST BENCH Couplings Flange SRN FLEXIBLE COUPLING FOR TEST BENCH BOSCH. DIAMETR CENTERED 50MM. DRAGGING BIDIRECTIONAL. SIMILAR: SRN FLEXIBLE COUPLING FOR TEST BENCH BOSCH FOR TOOTHLESS CUOPLING. DIAMETR CENTERED 50MM. DRAGGING BIDIRECTIONAL. SIMILAR: SRN SUPPORT FOR TEST BENCH (BOSCH TYPE ) New joints without teeth WE PRODUCE ANY RANGE OF JOINTS FOR APPLICATION IS ON SRN (ISO Standard Joint) AND ON SRN (NEW TYPE ISO Joint) VERSION 03 UK 04/18

49 TEST BENCH TEST BENCH 49 SRN TEST BENCH FOR TESTING E REPAIR HIGH PRESSURE DIESEL PUMP. 7,5KW, 8 SECTIONS SRN TEST BENCH FOR TESTING E REPAIR HIGH PRESSURE DIESEL PUMP. 11KW, 12 SECTIONS 04/18 UK VERSION 03

50 TEST BENCH TEST BENCH SRN UNIVERSAL GLASS KIT IN PLEXIGLAS TO VISUALIZE THE SPRAY OF COMMON RAIL INJECTORS Note: for NOZZLE 7MM AND 9MM DIAMETER SRN UNIVERSAL KIT OF 4 GLASSES IN PLEXIGLAS TO VISUALIZE THE SPRAY OF COMMON RAIL INJECTORS Note: for NOZZLE 7MM AND 9MM DIAMETER 50 SRN /17 BUSHING DIAMETR 17MM Note: TO BE USING WITH SRN SRN /19 BUSHING DIAMETR 19MM Note: TO BE USING WITH SRN SRN /21 BUSHING DIAMETR 21MM Note: TO BE USING WITH SRN VERSION 03 UK 04/18

51 TOOLS FOR TEST BENCH Rail SRN COMPLETE RAIL FOR ALL TYPE OF TEST BENCH AND SIMULATORS COMMON RAIL SRN FITTING 14X14 FOR RAIL SRN SRN NUT WITH BLIND HEAD FOR RAIL SRN SRN PLUG WITH THREAD M14X1,5 FOR RAIL SRN SRN DAMPER FOR TEST BENCH WITH QUICK CONNECTION SRN UNIVERSAL QUICK CONNECTION FOR ALL TYPE OF NOZZLEHOLDERS. DIAM. 7MM SRN UNIVERSAL QUICK CONNECTION FOR ALL TYPE OF NOZZLEHOLDERS. DIAM. 9MM 04/18 UK VERSION 03

52 TOOLS FOR TEST BENCH Tools SRN TUBE TYGON MM 3,2X6,4. SOLD AT THE METER SRN TUBE TYGON MM 4,8 X 8,0. SOLD AT THE METER 52 SRN TUBE TYGON MM 8,0 X11,2. SOLD AT THE METER SRN RILSAN PIPE FOR TEST BENCH, L=2MT SRN REDUCTION FITTING F14 / M12 FOR TUBE, TEST BENCH AND INJECTORS SRN VERSION 03 UK 04/18 REDUCTION FITTING F12 / M14 FOR TUBE, TEST BENCH AND INJECTORS

53 TOOLS FOR TEST BENCH SRN LONG FITTING F14 / M12 FOR COMMON RAIL INJECTOR PIEZO BOSCH SRN FITTING F16 / M14 FOR CP4 PUMP 53 04/18 UK VERSION 03

54 DIESEL TRADITIONAL SRN LDA CONTROL WRENCH, HEXAGON 10, 14MM SIMILAR: SRN EXTRACTOR FOR DISASSEMBLY AND ASSEMBLY TAPPET P7100 AND P7800. SIMILAR: KDEP SRN MOTORING COUPLING FOR GEAR,F DIAM. 17MM FOR CAV PUMPS SRN TAPPET LIFTER FOR P PUMP 10X1 Note: , KDEP1041 SRN EHAB CONNECTION FOR H PUMPS Note: VERSION 03 UK 04/18

55 DIESEL TRADITIONAL SRN TOOLS FOR DISMOUNT/MOUNT EP-VE BOSCH PUMPS Note: 20PCS SRN MITYVAC DIESEL PRESSURE TESTING PUMP +1,5 BAR FOR LDA AND VACUUM TESTING PUMP 1000MBAR SRN DECIMAL COMPARATOR STROKE 30MM - 0.1MM Note: FOR LINE PUMPS 04/18 UK VERSION 03

56 CAM-BOX EUI/EUP Wrench SRN OCTAGONAL WRENCH 38 MM, TO DISMOUNT THE SOLENOID OF UNIT-INJECTOR SRN WRENCH 12 SIDES FOR DIMONTING/MOUNTING THE SOLENOID FOR INJECTOR-PUMP AUDI AND VW Note: TO USE ON INJECTOR-PUMP SRN HEXAGONAL WRENCH TO DISMOUNT SOLENOID OF UNIT-INJECTOR VW, AUDI Note: XX AND XX SRN HEXAGONAL WRENCH 29MM FOR DISMOUNTING/ MOUNTING BODY OF NUT FOR UNIT-INJECTORS AUDI / VW Note: , , , , , SRN PENTATORX SCREW KEY FOR MERCEDES ACTROS, INS. FROM 1/4 VERSION 03 UK 04/18

57 CAM-BOX EUI/EUP Wrench - Various SRN WRENCH FOR DISMOUNTING/MOUNTING BODY OF NUT FOR UNIT-INJECTORS AUDI / VW Note: FOR SRN WRENCH TO DISMOUNTING/MOUNTING OF NOZZLE NUT OF DELPHI SMART INJECTOR Note: with 1/2 square connection 57 SRN GASKET KIT FOR EUI VOLVO-IVECO-BH-DELPHI SRN ADAPTER-HOLDER FOR INDICATOR FOR EUI INJECTORS Note: INDICATOR IS NOT INCLUDED 04/18 UK VERSION 03

58 EUI/EUP Kit tandem SRN REPAIR KIT TANDEM AUDI - VW - LINK Note: F009D00001=F009D02804, A SRN REPAIR TANDEM AUDI - VW - FORD - SEAT - SKODA 58 Note: F009D00069, 03G145209C SRN REPAIR TANDEM AUDI - SKODA - VW - SEAT Note: E=H=K SRN REPAIR KIT TANDEM AUDI - VW - SEAT Note: M=Q, D02008 VERSION 03 UK 04/18

59 EUI/EUP Kit tandem SRN REPAIR KIT TANDEM VW TRASPORTER/TOUREG/ PHAETON Note: H=F=J, 07Z145209B=C=D SRN REPAIR KIT TANDEM VW GOLF Note: B 59 SRN REPAIR KIT TANDEM VW TOUREG Note: 07Z127025F=E 04/18 UK VERSION 03

60 CAM-BOX EUI/EUP CAM-BOX electronic part SRN SIMULATOR TESTER CAM-BOX FOR INJECTOR-PUMPS EUI, TIPE UI-UPI, PDE, PLD CAPABILITY: 2 AND 4 PIN (NO PIEZO) 60 SRN ELECTRONIC SIMULATOR FOR UNIT INJECTION SYSTEM (UIS, EUI, UPS) SRN UNIVERSAL PIEZOELECTRIC SENSOR FOR CAM- BOX APPLICATION. TO BE USED FOR READING THE BIP POINT ON THE EUI UNITINJECTORS Note: TO BE USED WITH DGiC-CB SIMULATOR AND OLD VERSION CBCR-CB VERSION 03 UK 04/18

61 CAM-BOX EUI/EUP CAM-BOX mecanical part SRN UNIVERSAL CAM-BOX THAT FITS MOST CONVENTIONAL TEST BENCHS IN THE MARKET (h:125mm) for UIS systems 61 TECNICAL FEATURES MADE WITH SPECIFIC DESIGN THAT FITS MOST CONVENTIONAL TEST BENCHS like BOSCH or similar WITH BOSCH FEATURES CENTERING SIZE Ø20mm HEIGHT 125mm. * If you want use that Cam-Box on any different test benches it is mandatory control before the centering and height size. We can provide to you a specific plate to adjust the Cam-Box features. 04/18 UK VERSION 03

62 CAM-BOX MECANICAL PART Accessories base kit N 4 BUSHES/GLASSES to capture the calibration testing oil (SRN ) BRAKET FOR FIXING THE BUSHES/GLASESE and to pull out the EUI from the adaptors 2 TAPPET SCREWS concave and convex (SRN ) RILSAN PIPE/HOSE Ø6MM to be used with «A» and «D» (SRN ) N 3 PROTECTIVE SPURT and cover tappet (SRN ) BREAK SPRAY ADAPTOR to collect the spray in to the burette (SRN ) 62 LIFTING HANDLE AND LOCKING PIN (SRN ) N 2 CYLINDRICAL CENTERING GUIDE SIZE Ø20MM (SRN ) CAMSHAFT H8MM (SRN ) Bosch Volvo/Iveco TEST ADAPTOR standard forniture (SRN ) BRACKET USE TO FIX the EUI in to the test adaptor «L» (SRN ) BASIC HARDWARE BOLTS kit compose with: 1 overflow valve, 1 banjo bolt, 2 banjo, and washer (SRN ) PROTECTIVE PROXIMITY COVER (SRN ) VERSION 03 UK 04/18

63 CAM-BOX MECANICAL PART Accessories optional SRN Test bench Coupling with cone 30mm size and special nut to fix and unlock the coupling on the shatf Note: coupling with two teeth SRN Couple of Volkswagen test adaptors 1 Series (SRN ) and 2 Series (SRN ). Kit compose with Bushes/Glasses to capture the calibration testing oil and Bracket use to fix the EUI in to the test adaptor 63 Note: for UI xx -.1xx -.2xx -.3xx -.4xx SRN IVECO Cursor test adaptor Note: for Cursor 8 350CV (type little) It s mandatory use the little camshaft SRN Land Rover test adaptor. Kit compose with Bushes/ Glasses to capture the calibration testing oil and Bracket use to fix the EUI in to the test adaptor Note: for UI similar BEBE2A01xxx 04/18 UK VERSION 03

64 CAM-BOX MECANICAL PART Accessories optional SRN Scania test adaptor. Kit compose with tappet screw Note: for UI similar Some times it s necessary remove the Oring SRN Volvo Delphi and Iveco Stralis test adaptor. 64 Note: for UI Delphi 2 & 4 PIN 500/520HP SRN John Deere test adaptor Note: for UI-RE SRN Caterpillar CAT15 test adaptor. Kit compose with specific Connector-Bushes to capture the calibration testing oil, Bracket use to fix the EUI in to the test adaptor and Protective spurt/cover tappet Note: for CAT-15 VERSION 03 UK 04/18

65 CAM-BOX MECANICAL PART Accessories optional SRN Caterpillar CAT10 test adaptor. Kit compose with specific Connector-Bushes to capture the calibration testing oil Note: for CAT-10 SRN Detroit diesel test adaptor. Kit compose with specific Connector-Bushes to capture the calibration testing oil, Bracket use to fix the EUI in to the test adaptor 65 Note: for DETROIT SRN CUMMINS test adaptor. Kit compose with specific Connector-Bushes to capture the calibration testing oil, Bracket use to fix the EUI in to the test adaptor Note: for CUMMINS SRN CAMSHAFT (SRN.103.xxx) size 11,5mm Note: to be used with all the big EUI UI-UP 04/18 UK VERSION 03

66 CAM-BOX MECANICAL PART Accessories optional SRN Mercedes ACTROS test adaptor. Kit compose with injector test adaptor Note: for UP Actros SRN Mercedes ATEGO test adaptor. Kit compose with injector test adaptor 66 Note: for UP Atego SRN RENAUL DAF, MAK test adaptor. Kit compose with injector test adaptor and specific connectorbushe to capture the calibration testing oil Note: for UP Daf-Mak VERSION 03 UK 04/18

67 CAM-BOX ACCESSORIE CORRELATED NOP test adaptors SRN NOP calibration test-adaptor to be used on EUI SCANIA, to verify the Nozzle Opening Pressure Note: thread size 31x1mm SRN NOP calibration test-adaptor to be used on EUI Volvo and Iveco Cursor 350 type, to verify the Nozzle Opening Pressure Note: thread size 28x1mm 67 SRN NOP calibration test-adaptor to be used on EUI Volvo FH12, Volvo Type 420 and 460 pumps and CAT L10, to verify the Nozzle Opening Pressure Note: thread size 28x1mm. Transverse hole SRN NOP calibration test-adaptor to be used on EUI Volvo 460 Euro 2 type and Scania, to verify the Nozzle Opening Pressure Note: thread size 31x1mm. Transverse hole 04/18 UK VERSION 03

68 CAM-BOX ACCESSORIE CORRELATED NOP test adaptors SRN NOP calibration test-adaptor to be used on EUI Caterpillar and John Deere, to verify the Nozzle Opening Pressure Note: thread size 28x1mm SRN NOP calibration test-adaptor to be used on EUI AUDI/VW 2, to verify the Nozzle Opening Pressure 68 Note: Volkswagen 2 SRN NOP calibration test-adaptor to be used on EUI Volkswagen, to verify the Nozzle Opening Pressure Note: universal SRN NOP calibration test-adaptor to be used on EUI Land Rover, to verify the Nozzle Opening Pressure Note: Land Rover VERSION 03 UK 04/18

69 CAM-BOX ACCESSORIE CORRELATED NOP test adaptors SRN NOP calibration test-adaptor to be used on EUI Detroit, to verify the Nozzle Opening Pressure Note: Detroid SRN NOP calibration test-adaptor to be used on EUI Cummins L10-M11, to verify the Nozzle Opening Pressure Note: Cummins L10-M11 69 SRN NOP calibration test-adaptor to be used on EUI Cummins N14, to verify the Nozzle Opening Pressure Note: Cummins N14 SRN NOP calibration test-adaptor to be used on EUI Volvo 520HP, to verify the Nozzle Opening Pressure Note: Volvo 520HP 04/18 UK VERSION 03

70 CAM-BOX ACCESSORIE CORRELATED NOP test adaptors SRN NOP calibration test-adaptor to be used on EUI CAT 3500 series, to verify the Nozzle Opening Pressure Note: Caterpillar series 3500 thread size 27x1,5mm SRN NOP calibration test-adaptor to be used on EUI CAT marine application, to verify the Nozzle Opening Pressure Note: Caterpillar marine applicationthread size 36x1,5mm SRN NOP calibration test-adaptor to be used on EUI Nissan 440, to verify the Nozzle Opening Pressure Note: Nissan 440, thread size 31x1mm SRN NOP calibration test-adaptor to be used on EUI Iveco Stralis 500HP, to verify the Nozzle Opening Pressure Note: Iveco Stralis 500HP thread size 36x1mm VERSION 03 UK 04/18

71 CAM-BOX ACCESSORIE CORRELATED NOP test adaptors SRN NOP calibration test-adaptor to be used on EUI Audi, VW , to verify the Nozzle Opening Pressure Note: Audi, VW Similar: SRN NOP calibration test-adaptor to be used on EUI Audi, VW xx/2xx/4xx/6xx, to verify the Nozzle Opening Pressure Note: Audi, VW , , , Similar: SRN NOP calibration test-adaptor to be used on EUI Audi, VW 2 (2.0l), to verify the Nozzle Opening Pressure Note: Audi, VW 2, Similar: SRN NOP calibration test-adaptor to be used on EUI Audi, VW Siemens VDO piezo, to verify the Nozzle Opening Pressure Note: VW Siemens VDO Piezo 04/18 UK VERSION 03

72 CAM-BOX ACCESSORIE CORRELATED NOP test adaptors SRN NOP calibration test-adaptor to be used on EUI Audi, CUMMINS, to verify the Nozzle Opening Pressure Note: Cummins, America thread SRN NOP calibration test-adaptor to be used on EUI Audi, VOLVO DELPHI 4PIN, to verify the Nozzle Opening Pressure Note: Volvo Delphi 4 pin, thread size 34x1mm SRN NOP calibration test-adaptor to be used on CAT C7, to verify the Nozzle Opening Pressure VERSION 03 UK 04/18

73 DIESEL Various SRN GAS-OIL STEAM ASPIRATOR WITH QUICK CONNECTOR Note: to be used with SRN SRN HAND DIESEL ENGINE INJECTOR TESTER Note: STANDARD VERSION WITH 0-400BAR GAUGE, POSSIBLE TO MODIFY GAUGE FROM 0-600BAR AND AGAIN USING THE GAUGE WITH GLYCERINE. 73 SRN CENTESIMAL DIGITAL GAUGE WITH LCD SCREEN, RESOLUTION 0,01MM Note: CONVERSATION MM/INCH SRN DIGITAL MILLESIMALE COMPARATOR, 12,5 MM - 0,001 MM Note: CONVERSATION MM/INCH 04/18 UK VERSION 03

74 DIESEL Various SRN MILLESIMAL DIGITAL MICROMETER FOR EXTERNAL 0-25MM SRN CENTESIMAL MICROMETER FOR EXTERNAL 0-25MM SRN CENTESIMAL COMPARATOR, 10 MM - 0,01 MM SRN UNIVERSAL SUPPORT FOR MICROMETERS SRN QUICK CONNECTION 1/8 FEMALE SRN QUICK CONNECTION 1/8 MALE VERSION 03 UK 04/18

75 DIESEL Various SRN COUPLES LEVER FOR DIESEL FUEL FILTER OPEL / FIAT Note: TO REMOVE THE FUEL PIPES SRN ENGINE CAMSHAFT RENAULT DCI 1,5 SRN KIT FOR EXTRACTION OF BROKEN OR DAMAGED CANDLETTES (MM9X1) SRN KIT FOR EXTRACTION OF BROKEN OR DAMAGED CANDLETTES (MM8X1 - MM9X1 - MM10X1) SRN EXTENSION 1/2 50MM 04/18 UK VERSION 03

76 VARIOUS Various SRN TOOL TO LOCK DRIVING PULLEY WHILE SETTING Note: RENAULT 1,5-1,9 DCI SRN TIMING TOOL FOR OPEL V 76 SRN TIMING TOOL FOR RENAULT 2.0 DCI SRN TIMING TOOL FOR OPEL ANTARA / CHEVROLET CAPTIVA SRN TIMING TOOL FOR RENAULT 2,2 DCI E 2,5 DCI VERSION 03 UK 04/18

77 VARIOUS Various SRN TIMING TOOL FOR CHRYSLER CRD Note: VOYAGER - CHEROKEE (4PCS) SRN TIMING TOOL FOR F1A -F1C IVECO DAILY E DUCATO CC SRN TIMING TOOL FOR AUDI 1.2 FTSI 8V TURBO, VW, SKODA FSI-TSI SRN TIMING TOOL FOR BMW 2.0 SRN TIMING TOOL FOR MULTIJET /18 UK VERSION 03

78 VARIOUS Ultrasonic tank SRN.104,036 ULTRASONIC CLEANING TANK ULTRA STRONG FOR THE CLEANING OF ALL TYPES OF INJECTORS AND PUMPS DIESEL AND PETROL. COMPLETE WITH TEMPERATURE SENSOR AND LEVEL. ADJUSTABLE TIMER Note: CAPACITY 5L, SOLD WITH A BASKET SRN SUPPORT FOR INJECTOR SRN SRN.104, ULTRASONIC CLEANING TANK ULTRA STRONG FOR THE CLEANING OF ALL TYPES OF INJECTORS AND PUMPS DIESEL AND PETROL. COMPLETE WITH TEMPERATURE SENSOR AND LEVEL. ADJUSTABLE TIMER Note: CAPACITY 3,5L, SOLD WITH A BASKET SRN SUPPORT FOR INJECTOR SRN SRN.104,038 INOX BASKET FOR THE ULTRASONIC TANK Note: SUPPLIED WITH SRN OR SRN SRN.104,039 SUPPORT FOR INJECTORS FOR THE ULTRASONIC TANK Note: SUPPLIED WITH SRN OR SRN VERSION 03 UK 04/18

79 FUEL Various SRN FILTER S PULLER FOR GASOLINE/GAS/ CNG/LPG/GDI INJECTORS 79 04/18 UK VERSION 03

80 FUEL - VARIOUS Fuel - Various SRN SPARE PARTS KIT FOR PETROL INJECTOR (BOSCH, DELPHI, WEBER). TOTAL: 460 PCS KIT INCLUDED: SRN /1 O RING IVECO (50PCS) Note: REF SRN /2 O RING VITON (10PCS) Note: REF SRN /3 O RING BOSCH EV1 BI-FUEL, 7,80X3,60MM (50PCS) Note: REF SRN /4 O RING VITON, 7,66X1,78MM (50PCS) SRN /5 O RING BLACK BOSCH EV1, EV6, EV12, EV14, WEBER (100PCS) SRN /6 O RING VITON, 10,82X1,78MM (50PCS) VERSION 03 UK 04/18

81 FUEL - VARIOUS Fuel - Various SRN /7 O RING VITON VW, AUDI, 14X1,78MM.(50PCS) Note: REF SRN /8 PETROL FILTER INJECTOR (BOSCH APPLICATIONS) (20PZ) SRN /9 PETROL FILTER INJECTOR (WEBER APPLICATIONS) (20PZ) 81 SRN /10 PETROL FILTER INJECTOR (BLU COLOR) (20PZ) SRN /11 PETROL PLUG BOSCH INJIECTOR (20PCS) Note: REF SRN /12 PLUG FOR PETROL INJIECTOR (20PCS) Note: BLU COLOR 04/18 UK VERSION 03

82 VARIOUS Various SRN LIQUID FOR ULTRASONIC TANK DIESEL INJECTORS Note: 1 LITER FOR CLEANING METALS, PLASTIC, CERAMIC, GLASS SRN LIQUID FOR ULTRASONIC TANK GASOLINE INJECTORS 82 Note: 1 LITER TO BE USED FOR CLEANING ALUMINUM, ZINC AND COOPER SRN.302.R4L TESTING FLUID FOR FUEL INJECTORS (4LT) FOR GS AND GD SERIES MACHINES SRN.30.Y4L ULTRASONIC SOLVENT DIESEL+ BENZINA (4LT) Note: CARBONZAPP VERSION 03 UK 04/18

83 VARIOUS Various SRN LIQUID FOR TEST BENCH ENI (20L). ENI FLUID CALIBRATION SRN HIGH QUALITY LIQUID FOR DIESEL TEST BENCH FOR DIGITAL READING, VISCOR (20L) Note: BOSCH APPROVED 83 SRN.30.Y4L POWDER TO WASH ALUMINUM IN ULTRASONIC TANK Note: TO DILUTE WITH WATER 04/18 UK VERSION 03

84 M I L A N O SRN-MI srl Via Monte Bianco, VITTUONE (Milan) - ITALY Tel./Fax office@srn-mi.it OFFICIAL DISTRIBUTOR