NEW PRODUCTS SPECIAL OFFERS

Transcription

1 Specialist Tool Solutions PRODUCTS SPECIAL OFFERS JULY - SEPTEMBER 2016

2 COOLING Tel: COMBINED DEAL! + OFFER SAVE LIST PRICE V2SP1 315 Series Cooling System Pressure Test Kit c/w Combustion Leakage Tester Provides an effective solution when pressure testing the cooling system to help locate internal & external leaks Includes: - Hand Pump with Pressure Gauge & Quick-Release fitting - Hose Assembly c/w quick-release fitting - 16 x Threaded cap adaptors - 3 x Bayonet Fitting cap adaptors - 1 x Cap Adaptor wrench Includes Combustion Leakage Tester ( ) for the fast and accurate diagnosis of cylinder head gasket leaks Note: Full application details can be found on our website: V2SP XL Cooling System Pressure Test Kit c/w XL Combustion Leakage Tester Now covers more: DAF, Renault, Caterpillar, Optare, MAN, Dart, Komatsu, JCB, Volvo construction and agricultural vehicles Includes: - Metal bodied hand pump with Pressure Dual Gauge & Quick-Release fitting - Hose Assembly c/w quick-release fitting - 10 x Reservoir & Radiator pressure caps Includes XL Combustion Leakage Tester ( ) for the fast and accurate diagnosis of cylinder head gasket leaks OFFER SAVE LIST PRICE COMBINED DEAL! Combined Petrol & Diesel Cylinder Leakage Tester Kit Provides a direct indication to the location of the leak by measuring the rate of loss of compression for individual cylinders Helps to diagnose worn / broken piston rings, burnt / leaking valves and faulty head gaskets Includes a selection of glow plugs and an adjustable dummy injector Supplied with M12 and M14 brass quick release spark plug adaptors Petrol only Cylinder Leakage Tester Kit As per kit above excluding glow plugs & dummy injector FOR BOTH PETROL & DIESEL ENGINES HGV Cap Adaptor Cooling Cap Adaptor Set Dennis / Optare Set of 2 cap adaptors to update Optional Cap Adaptor for use V2 kit (above) with kit and V2 kit (above) Applications: Dennis Dart PSV s / Optare Solo PSV s and related models Applications include: BMW, Chevrolet, Mini, Saab & Vauxhall Note: Full application details can be found on our website: Fortron Coolant Flush Machine Effective way of flushing and exchanging the complete cooling system fluid Suitable for all types of coolants & vehicles Includes a set of multi-application adaptor fittings Air operated and portable Synchronised operation Provides a controlled flow of new fluid under pressure and draws old fluid out of system using adjustable vacuum Fluid Accessories Part No. Description Price Coolant Flush Treatment Additive Coolant Flush Treatment Additive - 12 Pack also available ( ) 1

3 WORKSHOP TOOLS Start / Stop Battery & Electrical System Analyser Tests 6V-12V batteries and 12V-24V volt charging & starting systems Digital screen with integrated printer Operating range: CCA Bad connection warning Tests EFB, VRLA / GEL, AGM Flat Plate, AGM Spiral and regular liquid batteries in seconds Rating system: SAE (CCA) / DIN / EN / IEC & JIS OFFER SAVE LIST PRICE SP Portable 4 Gas Analyser with Printer For fault diagnosis, tuning and pre-mot testing Truly portable hand-held gas analyser - Ultra light weight - only 1.1kg Measures CO, HC, CO2, O2 (NOx model option available on request) to Class 1 accuracy Suitable for both petrol and LPG vehicles and ideal for both static and dynamic testing Internal memory stores up to 250 test results Up to 4 hours internal battery life Provides Lambda / AFR measurement & corrected CO Pump speed control - Improves battery life Bluetooth connectivity to PC (Free analytical software available to download) Includes printer and AC / 12v chargers INCLUDES INFRA-RED MADE IN THE UK WORTH PRINTER ! Digital LCD Circuit Tester Suitable for 6, 12 and 24v systems LED indication for power (red) and ground (green) Features crocodile clip with spring cable extendable to 3 metres Stainless steel probe Small testing current <10mA Ratcheting Crimping Plier for Insulated Terminals Steel construction with hardened & tempered jaws Ratchet action ensures consistent tension when crimping Suitable for terminals: mm / mm / mm OFFER SAVE 8.55 LIST PRICE IDEAL FOR USE ON VW FUEL FILTER PIPE CLIPS Two Way Hose Clamp Plier For use on radiator clamps, fuel line clamps, tank ventilation line clamps and bearing clips Intersected slot design ideal for use in confined spaces 16mm wide head more effectively grips hose clamp compared to general 9mm head pliers OFFER SAVE 7.00 LIST PRICE Pc. Non Marking Trim Tool Set Professional set of strong, flexible plastic angled, lever and panel pullers Reduces risk of damaging / scratching surfaces compared to general 9mm head pliers /2 Impact Bar For loosening rusted or seized bolts using impact force Produces 8 x torque multiplication with each hammer blow Use with impact sockets and driver bits Bi-directional use to loosen or tighten fasteners Swivel head aids with operation in limited access situations Impact absorbing composite handle

4 HGV Tel: HGV Split Bush Kits For the removal and installation of split / spring eye bushes on HGV vehicles Uses a unique clamping system and a series of shells for a range of bush sizes from 56mm Dia to 75mm Dia. When used with a hydraulic pump ( ) the kit allows the operator to work in a limited access environment and so reduce the amount of disassembly work required Applications: Mercedes Benz, MAN, MAN Front Spring, IVECO Eurostar, Mercedes Benz Actros, Atego, DAF and Volvo Split Bush Kit - Master Comprehensive kit includes clamp assembly, 9 x shells - 56mm / 58mm / 60mm / 63mm / 65mm / 66mm / 68mm / 70mm / 75mm plus hydraulic components Split Bush Kit - MB & DAF Includes clamp assembly, 2 x shells - 63mm and 75mm plus hydraulic components Note: Part kits also available - see table for details Part No. Description Price Split Bush Kit - Basic (Clamp Assembly & Shells 1-9) Split Bush Kit - MB / DAF - Basic (Clamp Assembly & Shells 1 & 6) Clamp Assembly Shell 1 (75mm) - Mercedes Benz Shell 2 (70mm) - MAN Shell 3 (68mm) - MAN Front Spring Shell 4 (66mm) - IVECO Eurostar Shell 5 (65mm) - Mercedes Benz Actros, Atego Shell 6 (63mm) - DAF Shell 7 (60mm) - Mercedes Benz / IVECO Eurostar Shell 8 (58mm) - Mercedes Benz / Volvo Shell 9 (56mm) - IVECO Eurostar A full list of components is available on our website. Please visit: Scan the QR code to watch an overview video of the HGV Split Bush Kit Hydraulic Aluminium Pumps Portable & lightweight aluminium bodied hydraulic pumps fitted with gauge, hydraulic heavy duty hose and ¾ hydraulic coupler Pressure Rating: 10,000 psi / 700 bar Designed for use with single acting cylinders Automatic overload relief valve protects hydraulic components Hand Operated Pump Automatic two speed operation - High flow for low resistance and low flow for high resistance OFFER SAVE LIST PRICE Air Powered Pump Foot pedal control Unique inlet and outlet design features a low noise exhaust system OFFER SAVE LIST PRICE SP INCLUDES FREE CASE Motorq 400-3/4 Push-Thru Heavy Duty Torque Wrench Nm / lbs.ft Length: 1150mm Weight: 6.30kg SP INCLUDES FREE CASE Motorq 500-3/4 Push-Thru Heavy Duty Torque Wrench Nm / lbs.ft Length: 1475mm Weight: 7.30kg SP INCLUDES FREE CASE Motorq Stepped 3/4 to 1 Heavy Duty Torque Wrench 1 Sq. Dr (uses ¾ to 1 stepped convertor) Nm / lbs.ft Length: 1475mm Weight: 10.40kg

5 FLUID HANDLING New Range of AdBlue Transportation Tanks For transportation and refuelling of AdBlue equipped vehicles Ideal for car, van, light commercial, agricultural, construction and heavy commercial workshops Impact resistant polyethylene tank, UV stabilised and equipped with wheels suitable for easy transportation Available in two tank sizes - 68L for small workshops & 110L for large workshops Horizontal filling operation Vented filling plug Part No. Description Type Hose AdBlue Transport Tank - 68L Manual Pump AdBlue Transport Tank - 68L Manual Pump AdBlue Transport Tank - 68L 12v DC Pump AdBlue Digital Hose End Meter AdBlue Transport Tank - 110L 12v DC Pump Plastic manual rotary pump with plastic manual nozzle Plastic manual rotary pump with stainless steel spout & plug 12v DC pump - 30L/Min with plastic manual nozzle Suitable for use with above models 12v DC pump - 30L/Min with Piusi digital nozzle AVAILABLE IN TWO TANK SIZES 68L & 110L 4m EPDM 4m PVC 4m EPDM Tank Empty Weight Price 11kg kg kg m EPDM 12kg v Electric Brake Bleeder One man operation for brake & clutch bleeding Compatible with ABS systems Rugged impact resistant moulded housing Long supply hose (3.2m) Weight: 10kg Adjustable pressure output from 0-6 bar to suit vehicle Large internal storage area for brake fluid containers up to 10L Includes aluminium SP Euro cap - angled screw type for popular vehicle connection Additional range of caps also available 6 BAR OFFER SAVE LIST PRICE STAINLESS STEEL 45L TANK Fuel Extractor / Retriever Retrieve fuel following a filling error, removal of tank sender unit, changing or checking the fuel gauge, rinsing the fuel tank during body work etc Emptying via tank filler neck or fuel lines Adaptor Set Set of fittings to connect in line, before the injection pump (on most fuel systems) for safe emptying of fuel IDEAL FOR VEHICLES WITHOUT A SUMP PLUG Pneumatic Oil Extractor Pneumatic Oil Extractor with 9 Litre Inspection Chamber Includes inspection chamber providing visual assurance that the suction facility is operating correctly Waste oil becomes immediately visible in the chamber allowing the user easy assessment of the oil Includes anti splash device Pneumatic Oil Extractors Designed to meet the requirements of the modern workshop as well as health & safety issues Remove / extract waste fluids or oil from an engine Combined volume capacity of 90 litres (70L tank & 20L drain bowl) Works best at oil temperatures between with suction speeds of up to 6 litres per minute Visible fill level indicator Working pressure 8-10 Bar Powered from compressed air Empty tank with compressed air at max. 1 bar pressure Includes: - Adaptors for BMW, Mercedes, VW and Citroen - 4 x 700mm nylon tube probes with internal spring steel anti-kink wires - 2 x 700mm steel probes WARNING: Do not use with corrosive or inflammable products 4

6 TORQUE Tel: Motorq 20-3/8 Push-Thru Torque Wrench 3/8 push thru sq dr 4-20 Nm / lbs.in Length: 210mm Weight: 0.36kg OFFER SAVE LIST PRICE Motorq 60-3/8 Push-Thru Torque Wrench 3/8 push thru sq dr 8-60 Nm / 5-45lbs.ft Length: 310mm Weight: 0.66kg OFFER SAVE LIST PRICE Motorq 100-3/8 Push-Thru Torque Wrench 3/8 push thru sq dr Nm / 15-80lbs.ft Length: 355mm Weight: 0.73kg Motorq 200-1/2 Push-Thru Torque Wrench 1/2 push thru sq dr Nm / lbs.ft Length: 445mm Weight: 1.01kg OFFER SAVE LIST PRICE OFFER SAVE LIST PRICE Motorq 300-1/2 Push-Thru Torque Wrench 1/2 push-thru sq dr Nm / lbs.ft Length: 575mm Weight: 1.40kg OFFER SAVE LIST PRICE Motorq 330-1/2 Push-Thru Torque Wrench 1/2 push-thru sq dr Nm / lbs.ft Length: 684mm Weight: 1.52kg OFFER SAVE LIST PRICE Motorq 399-3/4 Push-Thru Torque Wrench 3/4 push-thru sq dr Nm / lbs.ft Length: 684mm Weight: 2.10kg OFFER SAVE LIST PRICE Universal Digital Torque Angle Gauge For turning torqued fasteners through a further angle, as per vehicle manufacturers specifications Simple to use: Calibrate, set angle, mount and use Magnetic attachment One single tool can be used on 1/4, 3/8, 1/2, 3/4 drives Fits onto most ratchets, torque wrenches and power bars Indicates increasing angle on LCD display Works in both directions of rotation Audible notice when setting reached LED s glow red when setting exceeded 5 OFFER SAVE LIST PRICE

7 AIR TOOLS COMBINED DEAL! SP Micro Die Grinder c/w Bit Set Includes Micro Die Grinder Bit Set ( ) containing five shaped ends suitable for precision work Powerful mini device for small / fine grinding & milling 1/8 drive / 70,000rpm Ideal for work in confined spaces IDEAL FOR CUTTING BEARING CASES & LOCKING WHEEL NUTS OFFER SAVE LIST PRICE BESTSELLER Vibro-Impact Air Hammer A unique concept to aid the removal of seized suspension parts The Vibro-Impact system allows for the controlled application of force via an air powered impact hammer Allows the operator to control & gradually increase the force being applied, in order to loosen seized components Features a built-in shock-absorber in order to minimise risk of damage if too much pressure is accidentally applied Low vibration for user comfort Vibro-Impact Soft End Hammer Set For use with Vibro-Impact air hammer (above) Includes: - Adaptor shaft - Five hammers: 38mm: Medium flat OFFER SAVE LIST PRICE mm: Track rod, aluminium, copper and thermoplastic Vibro-Impact Pin Set - 6 Pc. Sizes: 5.2mm, 6.5mm, 6.9mm, 7.7mm, 9.3mm and 12.7mm Vibro-Impact Socket Set - 7 Pc. Designed to untighten seized screws, nuts or glow plugs without any damage To be used with Vibro-Impact air hammer (see above) Vibro-shaft 3/8 square drive Suitable for bolts, screws, rounded lugs, glow plugs, clamp-on injectors Special impact sockets with internal edge: 8, 9, 10, 11, 12, 13, 14mm High Quality Air Tools that set the standard for Torque! Impact Wrench Specifications: Part No. Drive Max Torque Nm (Reverse) Torque Nm (Fwd) Noise (dba) Air Consumption (l / min) Weight (kg) / (Mini) 1/ (Ultra-Short) 1/ / / / Price 6

8 INJECTOR SERVICE & REMOVAL Tel: Injector Extractor Kit with Hydraulic Cylinder Universal kit complete with hydraulic cylinder for removing seized fuel injectors. Note: Pump not included ( ) Hydraulic cylinder with 10 tonnes of force Can be used as a mechanical kit for confined spaces - i.e. against a bulkhead Can be used as a hydraulic kit for maximum power to help release tightly seized injectors Suitable for the extraction of diesel fuel injectors specifically: M17 x 1.0 for Bosch, M14 x 1.0 for Delphi, M16 x 1.0 for Toyota adaptor, M20 x 1.0 for Denso and M25 x 1.0 / M27 x 1.0 for Siemens Can be used in-situ saving time and expense Adjustable supporting feet allow for angle and position setting Main side and top bars allow for various engine configurations Injector Extractor Kit - PSA Group For removing injector nozzles on 2.0HDI and 2.2HDI - PSA group Removes tightly fixed injector nozzles without dismantling the cylinder head Injectors (Bosch / Siemens) can be removed simultaneously Includes bracket and 6 x screws Suitable for Peugeot, Citroen, Fiat & Lancia Engine Codes: DW10: RTH, RHW, 4HW, RHT, RHM, RHR, RHK DW12: 4HX, 4HZ, 4HW, 4HY, 4HT, 4HS, 4HP, 4HR, 4HN Injector Extractor Kit - Toyota To aid the removal of seized / stubborn Denso injectors Parts of the kit can be mounted together around an injector creating a stable mount for the slide hammer to fix onto - Compact slide hammer allows for use on an engine in-situ Suitable for Toyota, Nissan, Mazda, Opel / Vauxhall and Lexus Denso Injectors: MB MB40A H50B - 11L R050-10J Fortron Injector Max Machine Simple and effective method of cleaning both petrol and diesel fuel systems without the removal of injectors from the vehicle INCLUDES: Comprehensive Adaptor Set FREE leaflets & dispenser Access to the Fortron-Zone forum Listing on the Injector Max Garage Directory as featured on our website Inline T Connector BESTSELLER Designed to connect or T in between the vehicles own fuel delivery lines and allows the red fluid output hose to connect, so that RTG additive can be administered into tricky engines where regular connection does not allow an engine to run Fluid Accessories Part No. Description Price Petrol System Cleaning Fluid Diesel System Cleaning Fluid Vactek Fluid Bottle Induction Service Kit - Petrol (Aerosol) Induction Service Kit - Diesel (Aerosol) Induction Service Kit - Petrol (Pouring Fluid) Packs are available for all Fortron Fluid accessories. Ask your Distributor for details 7

9 INJECTOR SERVICE & REMOVAL Universal Injector Vibration Tool Specially designed tool to assist in the removal of stubborn injectors To be used in conjunction with any suitable injector puller or slide hammer Includes universal clamp to attach to pulling spindle or injector pulling adaptors where space allows The main body can be rotated to 4 positions on the horizontal and 4 positions at an angle Fully adjustable clamp and can be used with or without the tension springs provided Can be attached and locked in place with the two adjustable locking handles The tool can be used whilst the injector is under hydraulic / mechanical tension or before tension is applied The tool can also assist in other pulling applications Heavy Duty Slide Hammer Injector Removal Kit For the removal of Bosch, Delphi Denso and Siemens injectors Features a flexible u-joint adaptor for access in restricted areas Includes 6 x Injector adaptors, 4 x Injector Solenoid removers and 2 x Nozzle Extractors OFFER SAVE LIST PRICE FREE! OFFER SAVE LIST PRICE FREE! DIESEL INJECTOR SEAT CLEANER SET (017500V2 - WORTH See page 11 for details) WHEN YOU PURCHASE V2P V2P1 Hydraulic Injector Puller Kit c/w Hydraulic Pump and FREE Diesel Injector Seat Cleaner Set Provides controlled force to aid the removal of seized / stubborn injectors where there is insufficient access for traditional slide hammers Includes a multi-position frame, with adjustable legs of different lengths and a selection of mounting adaptors to allow alignment of the tool with the injectors on a wide variety of modern diesel engines Supplied with injector adaptors for most modern injector types 10 tonnes Hydraulic Hollow Cylinder provides the force Includes aluminium bodied hand pump - 2 Speed, 10,000psi fitted with gauge, hydraulic hose and ¾ hydraulic coupler V2 Hydraulic Injector Puller Kit only As per V2P1 (above) excluding hydraulic pump and free Diesel Injector Seat Cleaner Set V2 Mechanical Hydraulic Injector Puller Kit As per V2 kit (left) but includes a mechanical hydraulic ram Allows use of the kit without the need for a separate hydraulic pump OFFER SAVE LIST PRICE

10 DIESEL GLOW PLUG Tel: V2 Vibro Impact Glow Plug Remover Set For the removal of 8, 9, 10, 11 & 12mm glow plugs Uses controlled impact torque to create vibration Includes 4 low-torque settings for controlled vibration (10, 20, 30, 40Nm) Supplied with special long-reach 8, 9, 10, 11 & 12mm glow plug sockets, long and short extensions and universal joint for ease of access OFFER SAVE LIST PRICE Square Drive ¼ Max Torque - Right 40Nm Max Torque - Left 10 / 20 / 30 / 40Nm Air Inlet ¼ Air Consumption 250 ltrs / min Speed 12,000 per min Air Supply 6.3bar / 90psi Universal Glow Plug Removal Master Kit Complete set for removing broken glow plugs: M8 x 1.0, M9 x 1.0, M10 x 1.0 and M10 x 1.25 Kit includes 4 x special milling cutter tools (3 pcs with 4 cuttings and 1 pc with 2 x cuttings) with self-centering helicoidal tip for universal use - Individual centering adaptors are not required Quick and easy removal - also allows the user to restore the thread for installation of the new glow plug Specifications: Dimension A 14mm (M10) Dimension A 20mm (M9, M8) Dimension L 13mm L (thread) Universal Glow Plug Removal Kits 4 x special milling cutter tools with self-centering twist drill bit for universal use without the need for any dedicated centering aids Part No. Glow Plug Size Dimension A Dimension L Price M10 x 1.0 / M10 x mm 13mm M9 x mm 13mm M8 x mm 13mm Universal Glow Plug Tip Extraction Master Kit Complete kit for glow plugs electrode extraction: M8 x 1.0, M9 x 1.0, M10 x 1.0 and M10 x 1.25 Includes all the necessary tools (9 x extraction rods, 4 x glow plug guides and 1 x slide hammer) to safely remove the terminal part of the glow plug electrode without damaging the cylinder head UNIVERSAL KIT Glow Plug Tip Extraction Kits - M8, M9 & M10 Suitable for removing the final part of the electrode in case of breakage / seizure of the glow plug inside its seat Glow Plug Tip Extraction Kit - M10 x 1.0 Suitable for M10 thread size Glow Plug Tip Extraction Kit - M8 & M9 Suitable for M8 sized glow plug tips Also suits M9 glow plug tip removal by using the same M8 size in the slightly larger M9 female thread of the cylinder head

11 DIESEL GLOW PLUG & ENGINE SERVICE Universal Glow Plug Reamer Kit For cleaning the glow plug shaft and the sealing seat in the cylinder head Includes thread sizes: M8 x 1.0, M9 x 1.0, M10 x 1.0 and M10 x 1.25 Glow Plug Reamers Part No. Glow Plug Size Price M8 x M9 x M10 x 1.0 / M10 x UNIVERSAL KIT Glow Plug Repair Kit Complete kit for repairing glow plugs and spark plugs Glow Plug Sizes: M8 x 1.0, M9 x 1.0, M10 x 1.0, M10 x 1.25 and M12 x 1.25 Spark Plug Sizes: M12 x 1.25 and M14 x MADE IN THE UK Diesel Fuel System Bleeding Kit Diesel Fuel System Designed to allow the user to bleed / Bleeding Kit prime the low pressure feed side of Master Kit the diesel fuel system Includes kit (left) Contains common sized low pressure plus a low pressure fuel pipe sets including: gauge (10bar), tee piece - Standard 8mm, 10mm and newer and ratchet pump 9.65mm (3/8 inch) Gauge and tee piece - Renault small & large - Ford enables the same pipes to Typical coverage includes: be used for both bleeding Citroën, Fiat, Ford, Land Rover, OFFER and fuel pressure Peugeot, Renault, Volvo & Vauxhall SAVE Clear pipes for visability of air bubbles LIST PRICE OFFER SAVE LIST PRICE Universal Engine & Gearbox Support Designed to support the engine or gearbox when the engine mountings have been removed - e.g. When replacing timing / drive belts, water pumps etc Designed for all makes of vehicle - No need for costly model specific brackets The unit is suspended from the chassis via the support hooks, the engine / gearbox is supported by the support pad and is counter-balanced against the underside of the vehicle by the support arms Fully adjustable in all dimensions: - Extension: Min 630mm / Max 960mm - Support Plate Adjustment: 190mm OFFER SAVE LIST PRICE Seal Removal & Replacement Kit Remove & install awkward seals as found on OFFER SAVE LIST PRICE engines, gear boxes, power steering pumps etc Universal coverage for seals 27-58mm diameter Includes seal puller, long & short extracting hooks for seals - e.g. on camshafts or crankshafts and a selection of bushes, sleeves and mandrels for installing new seals 10

12 ENGINE SERVICE Tel: OFFER SAVE LIST PRICE V2 Diesel Injector Seat Cleaner Set Cleans injector seats and chambers when changing or reconditioning diesel injectors Helps to avoid blow-back due to poorly seated injectors Includes: Removal tool for copper washers, injector blanking plugs, wire brush cleaning set and centralising stem Pc. ATF Refill Adaptor Set Includes set of 10 adaptors for topping-up sealed transmissions Suitable for a variety of vehicles including: Audi, BMW, Ford, Honda, Mercedes, Nissan, Toyota, Volvo and VW OFFER SAVE LIST PRICE Universal Timing Gear Holder Single lever design enables quick and easy use Provides breaker bar strength for maximum holding force Allows adjustment of cam gear once installation is complete Strap Type Oil Filter Remover - For all filters up to 300mm diameter Multi-purpose strap wrench, ideal for all oil filters up to 300mm circumference Range: 20 to 300mm diameter Strap Length: 1 metre long & 40mm wide Double ended 13/16 hex c/w 3/8 & 1/2 sq. dr OFFER SAVE LIST PRICE th Gear Puller - Ford A quick & simple method of removing the fifth gear on Ford FWD transmissions, before carrying out internal repairs Applications: - Ford IB5 Gearbox: Fiesta / Ka / Focus - Ford MTX-75 Gearbox: Focus / C-Max / Mondeo / Jaguar X Type - Ford VXT-75 Gearbox: Galaxy / Transit / Transit Connect OFFER SAVE LIST PRICE ALLOWS FOR UNATTENDED OPERATION Fortron Automatic Transmission Fluid Flush Machine - Fully Auto Can replace up to 100% of transmission fluid Specify exact amount of fluid to change Digital control panel allows for fully automated control Safely cleans up and extends the service life of automatic transmissions Includes comprehensive adaptor set Fortron Automatic Transmission Fluid Flush Machine - Manual Manual controls for ATF exchange process Complete fluid exchange, including cooler, converter and cooler lines Includes range of fittings and adaptors Fluid Accessories Part No. Description Price ATF Flush Service Kit Fortron Power Steering Flush Machine Replaces 100% of steering fluid Takes on average 10 minutes per service Extends the service life of (often overlooked) system Revitalises and conditions o rings and seals Fluid Accessories Part No. Description Price Power Steering Flush Service Kit Packs are available for all Fortron Fluid Accessories. Ask your Distributor for details Further details of the Fortron range can be found on our website: 11

13 SUSPENSION WORKSTATIONS SIMPLY THE BEST... SPRINGS HAVE EVOLVED...HAVE YOUR TOOLS? AUTOMATIC JAW LEVELLING PIVOTS TO COMPENSATE & HOLD ALL COIL SPRINGS INCLUDING LEFT HAND COILS INTERCHANGEABLE JAWS / VICE TO SUIT DIFFERENT SPRINGS FULL HEIGHT STEEL SAFETY GATES LENGTH OF TRAVEL: 330MM SAFETY SWITCH PREVENTS OPERATION WHEN GATES ARE OPEN TOP ARMS & JAWS ADJUST AND LOCK TO SECURE SPRING ADJUSTABLE STRUT VICE WITH 4 x SETTING OPTIONS UP TO 2452KG OF FORCE (AT 10 BAR) AT THE PRESS OF A PEDAL UNIQUE DOUBLE DEPTH FRONT PLATE ALLOWS SAFE WORK ON EXTRA-LONG STRUT ASSEMBLIES 4 x FLOOR MOUNTING HOLES FOR INSURANCE COMPANY COMPLIANCE SP HEAVY DUTY PNEUMATIC COIL SPRING COMPRESSOR WORKSTATION Universal piece of equipment for assembling and disassembling struts and coil springs on cars, 4WD s and LCV s. Includes 2 x standard brackets (78-130mm / mm) and 1 x strut vice INCLUDES FREE WORTH OFFER SAVE LIST PRICE ADAPTOR BRACKET SET ( ) Suitable for Mercedes C Class (W203) up to 2007 Compatible with new range of Mercedes brackets / / Pc. Universal Shock Absorber Tool Set Enables the piston rod to be held whilst allowing the nut to be loosened / tightened Includes - 2-tap & slot-profile socket - D-profile / Slotted / T-profile bits - 6-pt sockets & bits - M12 - XZN bit Ideal for use with 3858 compressor workstation Upper Jaw Set For high compression and close coil springs (Toyota / Honda etc) Mercedes Bracket For: Mercedes C Class (W204) and E Class Coupe (W207 / C207) 2009 onwards - Front springs MADE IN THE UK OFFER SAVE LIST PRICE

14 SUSPENSION WORKSTATIONS Tel: THE BEST SPRING PROGRAMME ON THE MARKET Workstation Arm Extender - Pair Mounts between original top arm and jaw attachment Use to extend the length of the top spring mounting jaw position Can be used singly to provide 10mm extension or as a pair for 20mm ext Workstation Swivel Jaws - Pair Mounts onto top arms in place of standard top jaws & contacts directly onto spring Jaw floats to follow changes in spring angle / profile during compression Constant contact with the coil spring surface area for increased safety Able to work on both left and right handed coil springs when used in conjunction with brackets below MADE IN THE UK Jaw Holder For use with 3858 & 3868 workstation brackets Includes 3 x hanging hooks and 4 x slots for brackets Coil Spring Clamp Tool to secure coil spring into lower bracket Designed to hold the coil spring still during initial compression and restrict twisting through the bracket Special Bracket For VW Touareg / Porsche Cayenne Special Bracket For Mercedes C Class Special Bracket For Nissan Qashqai Mercedes Bracket For Mercedes C Class (W205) 2015 onwards - Front springs MADE IN THE UK OFFER SAVE LIST PRICE Mercedes Bracket For Mercedes ML Class Rear springs MADE IN THE UK OFFER SAVE LIST PRICE Double Depth Strut Vice For use with extra long strut assemblies Chrysler Voyager Adaptor Bracket Set Suitable for Mercedes C Class (W203) up to 2007 Compatible with new range of Mercedes brackets / /

15 SUSPENSION Astra H Rear Axle Body Bush Kit To remove and install the rear axle body bush on the vehicle Suitable for: - Astra H 2004 onwards - Meriva B 2010 onwards - Zafira B 2005 onwards MADE IN THE UK BESTSELLER Ford Transit Bearing Press Kit Successful removal of troublesome inner bearing race and reinstallation of complete bearing assembly For the removal and installation of the front wheel bearing on Ford Transits with the aid of a workshop press Suitable for bearings on both 5 & 6 stud hubs REMOVES BOTH THE INNER & OUTER BEARING RACE WITHOUT CUTTING OR HEATING MADE IN THE UK Ford Transit Rear Disc Separator Kit Press solution for removing the rear disc from the bearing hub The hub bearings on this type of Transit often seize in place, requiring extreme force to separate Suitable for Ford Transits 2000 onwards (where rear discs are fitted - 5 stud) Ford Transit Wheel Hub & Brake Disc Assembly Remover For removal of the front brake disc and hub assembly on Ford Transits from OEM Code: B Bearing References: SNR: R SKF: VKBA3589 Optimal: Febi: OFFER SAVE LIST PRICE Ford Transit Ball Joint Tool - Manual Option For the removal & installation of the lower front ball joints as found on Ford Transits Designed to support ball joint during installation - helps eliminate premature ball joint failure Manual option includes screw converter allowing the user to utilise an existing SP hydraulic ram ON VEHICLE SOLUTION Hydraulic option also available ( ) that includes 12 Tonne SP hydraulic ram MADE IN THE UK Ford Transit Lower Arm Bush Tool For the removal and replacement of the large rear bush on the lower arms of Ford Transits from Designed to be used with a V2 press frame and ram On vehicle solution with minimal strip down Can also be used in a workshop press for lower arms when they have been removed from the vehicle Applications: Ford Transit Mk5 & Mk6 from 2000 to 2013 OE Bush Numbers covered: , , &

16 SUSPENSION Tel: Universal C-Clamp CAN BE USED WITH AN IMPACT GUN OFFER SAVE LIST PRICE For the dismantling / installation of suspension components on the vehicle Jaw opening: 245mm Throat depth: 100mm Includes adaptors for use with the and XS Sleeve kits Designed to allow greater access in restricted situations and where the universal press frame is not suitable Special trapezoidal threaded screw, allows for the application of greater force Base cup works with gold and silver rings from the SP press frame ( / V2) Includes impact screw which can be removed and replaced with a hydraulic ram (1500 & 1800 Series) Fiesta Mark VI Rear Bush Kit For the installation and removal of the rear axle body mounting bush found on Fiesta Mark VI 2008 onwards OFFER SAVE LIST PRICE Land Rover Swivel Ball Joint Adaptor Set New on vehicle solution for the removal and replacement of twin swivel ball joints as fitted onto the front axles of two popular Land Rover models: Discovery and Range Rover P38A MADE IN THE UK V3 Mercedes Sprinter Ball Joint Adaptor Set Updated set now includes new cup for common aftermarket arms For the removal and installation of ball joints on Mercedes Sprinter and revised 06 onwards models (901, 902, 903, 904 and 906) Applications: UPDATED SET - Sprinter 95 onwards - VW Crafter & Sprinter 06 onwards - VW LT Opel Movano / Renault Master / Nissan Interstar Ball Joint Adaptor Sets For the removal and installation of upper and lower ball joints as fitted to the following: - Nissan Interstar 02 onwards - Opel Movano 98 onwards - Renault Master II 98 onwards V3 Adaptor Set - UPPER Ball Joint Adaptor set from main kit (187512V3) for use on upper ball joints OFFER SAVE LIST PRICE V3 Adaptor Set - LOWER Ball Joint Adaptor set from main kit (187512V3) for use on lower ball joints OFFER SAVE LIST PRICE Adaptor Sets for Focus / Fiesta Trailing Arm Bushes For the removal and installation of trailing arm bushes Adaptors can be used in a press frame with either a pressure screw (recommended) or a hydraulic ram* *Note - Adaptor Ring required Adaptor Set for Fiesta Adaptor Set for Focus Trailing Arm Bushes Trailing Arm Bushes Applications: Fiesta 95-02, KA and Puma For full application details, please visit our website: MADE IN THE UK Applications: C-MAX 07- MPV, MKI 98-04, MKII 04-, Kuga 08-, Mazda 3 (BK) 03-09, Mazda 5 (CR/CW) 05- MPV, Volvo C30 06-, Volvo C70 II 07-, Volvo S40 II and Volvo V

17 SUSPENSION GEN3 Wheel Bearing Kit Designed to remove the hub and bearing from aluminium multi-link suspension units with the aid of a pressure screw, adjustable legs and top plate to accommodate the different size bearings as found on VW group vehicles This procedure is currently carried out with repeated heavy blows using a hammer to remove the heavily corroded bearing which can easily damage surrounding components such as steering knuckles and ball joints or fracture the aluminium wishbone Applications: Audi: A4 00-, A5 07-, A6 97-, A7 10-, A8 94-, Q5 08-, R8 07- Seat: Exeo 08- VW: Passat 03- ON VEHICLE SOLUTION BESTSELLER V2 GEN2 All Sizes Master Kit 62 / 66 / 72 / 78 / 82 / 85mm sizes: - 62mm: Audi A2, VW Lupo (Front) - 66mm: Skoda Fabia, VW Fox (Front), Polo mm: Audi A1, Audi A2, Seat Cordoba, Ibiza, Skoda Fabia, Roomster, VW Polo (Front), VW Fox with PAS (Front) - 78mm: Ford Focus II, C-Max, Volvo C30, C70, S40, V50 (Front), Mazda 3-82mm: Ford Mondeo, Galaxy, S-Max, Land Rover Freelander 2, Volvo S80, V70, XC60, XC70-85mm: VW Multivan, Touareg, Transporter (Front / Rear) Individual Kits also available - Please contact Sykes-Pickavant for further information Bearing Reference: FAG: 5745, 5726, 5739, 5478, 5744 SKF: VKBA 6557, VKBA 3536, VKBA 6547, VKBA 6546, VKBA 6649 SNR-NTN: R157.45, R157.26, R157.40, R154.57, R BUY THE BEST! Universal Press & Pull Sleeve Kit - Car / LCV Kit Universal tool set for extracting and drawing-in of bushes, bearings, seals etc Contains 20 x Press Sleeves in 2mm dia. steps Inside Dia. Range: 34-72mm Outside Dia. Range: 44-82mm IDEAL FOR BALL JOINTS XS Sleeve Kit - Basic For use as an add-on to the kit (above) to increase applications for smaller bushes and ball joints Contains 10 x Press Sleeves in 2mm dia. steps Inside Dia. Range: 14-32mm Outside Dia. Range: 24-42mm XL Basic Kit - SUV / LCV For use as an add-on to the standard kit (left) Inside Dia. Range: 82-88mm & mm Outside Dia. Range: 92-98mm & mm XS Sleeve Kit - Master Stand alone kit for smaller bush applications Contains 10 x Press Sleeves in 2mm diameter steps Inside Dia. Range: 14-32mm Outside Dia. Range: 24-42mm FOR USE WITH THE 0878 Press Frame Extension Legs & Nose Piece RANGE OF SLEEVE KITS New kit designed for use with the 0878 range of sleeve kits Extends the 187 press frame - internal capacity from 200 to 300mm Pair of 100mm legs fit onto original 187 press frame legs Extra extension legs can be added to further increase length Nose piece connects press frame ram with 4 x step plate discs from the 0878 range of sleeve kits

18 INDUCTION Tel: SP INDUCTION HEATER RANGE - 3 VERSIONS NOW AVAILABLE! All Sykes-Pickavant Induction Heaters use high frequency magnetic fields to create induction heat. When ferrous metallic objects are placed inside these magnetic fields, they heat up in SECONDS - expanding the metal which allows for fast and easy release Operates cooler for better efficiency, handling and product longevity Long operating cycle time Includes 3 x coil attachments Durable reinforced thermal plastic housing with slip resistant grenade style grip For further details please visit: Integrated CE filter improves handling of product LED light illuminates work area 1 year warranty - Parts/Labour Carry Case with storage for all attachments SP 230v Induction Heater + Specifically designed for the UK/EU: 230v / 6 amp / 1000 watt with full CE certification SUMMER SPECIAL V SP 12v Induction Heater + Specifically designed for the UK/EU: 12v / 70 amp / 840 watt with full CE certification Completely portable - works with any 12v battery pack or 12v battery 12V BATTERY OPERATED N.B. Not included ONLY ONE ON THE MARKET! THE REST JUST CAN T TAKE THE HEAT! SP 110v Induction Heater + Specifically designed for the UK/EU: 110v / 6 amp / 1000 watt with full CE certification Provides safe and near instant heat for site work, construction and factory maintenance users IDEAL FOR SITE WORK Replaces the need for open flame options when heating components, making the completion of on-site risk assessments far easier N.B. Not included Choose from the following accessories that are compatible with our full range of Induction Heaters SP SP Coil Kit 8 x popular sizes of interchangeable coils SP Rope Coil Set - x3 Contains 3 x highly adaptable coils allowing user to shape to suit SP Heat Pad For the removal of decals, graphics, stripes, emblems & body mouldings etc Softens the adhesive to make removal simple & effective 17

19 AIR CONDITIONING New Range of Air Conditioning Machines Allows for the quick and efficient service of air con systems - cleaning the AC system, replacing refrigerant and ensuring a cool vehicle on any journey Each machine includes the following: AIR PURGE SYSTEM - New function that helps the user to manage the discharge of non-condensable gases, replacing the traditional method of a manual check using the vessel pressure gauge 100% RECHARGE - Super Charge exploits the machine s operation to obtain the same condition that would otherwise be created by means of vessel heating systems OIL CLEAN - No more waste. This function can force recovered oil discharge in the final phase, saving gas. VACUUM BEYOND REPAIR - Equipped with a high performance vacuum pump, reaching the best vacuum level more rapidly LONG LIFE PUMP - Allows an extension of up to 1000 hours of the average life of the pump oil used in the machine ECO LOCK COUPLERS - Equipped with ECO LOCK quick couplers, preventing gas wastage during removal - safeguarding operator safety and protecting the environment Range Easy to operate 12L recharge vessel 1 Year Warranty included 65kg - Easy to manoeuvre Includes printer Additional 2 Year Warranty also available - Ask for details Part No. Description Price PLUS Air Conditioning Machine - R-134a ECO 1234 Air Conditioning Machine - R-1234yf ALL MACHINES INCLUDE AN INTEGRATED PRINTER 8500 Range Easy to operate 20L recharge vessel 1 Year Warranty included 86kg Includes printer Additional 2 Year Warranty also available - Ask for details Part No. Description Price PLUS Air Conditioning Machine - R-134a PLUS Air Conditioning Machine - R-1234yf Range of Optional Accessories available: (See website for full details) Nitrogen Leak Test Kit Hybrid Pro Kit Flushing Kit for R134a Flushing Kit for R1234yf Note: Warranty Updates include: 2 x pcs dryer filter, 2 x pcs vacuum pump oil (500ml) and 2 x database updates 18

20 WORKSHOP EQUIPMENT Tel: Silver Series range of Hydraulic Workshop Presses equipped with a two-speed manual pump, overload safety valve, automatic arm back-run system & V blocks Heavy duty steel frame Two speed pump Overload safety valve Automatic arm return Pressure gauge V blocks Manufactured in the EU Piston over-travel limit stop Winch for table (For models & ) Part No. Rating Height (mm) Width (mm) Depth (mm) Bed Depth (mm) Range (mm) Weight (kg) Price * 15T * 20T * 25T * 30T T Optional accessories including press plates and press piece sets are also available. For details, please visit: *Recommended for use with Universal Press Support Block See below N.B. For deliveries made outside UK Mainland, an additional carriage charge will apply Other sizes of press are available - Contact Customer Services for details Universal Press Support Block Easily press bearings on a variety of suspension arms Three point contact guarantees a perfect, safe support Adjustable height anvil bolts Swivel element for added versatility Suitable for use with presses up to 30T SUITABLE FOR USE WITH PRESSES UP TO 30T Mechanical Headlight Beam Testers - MOT Approved & Pre-Inspection Features rotating column with adjustable mirror visor for accurate alignment to vehicle Luxmeter with graduated analogue scale for accurate light intensity measurement Easily adjustable vertical sliding mechanism by self lubricating sliders Features built in MOT beam checking panel SUITABLE FOR ALL HEADLIGHT TYPES INCLUDING XENON Pre-Inspection Headlight Beam Tester Portable base on 3 wheels (self install only) Column height: 1.66m MOT Approved Headlight Beam Tester - LV 3.7 metre rail kit / column height: 1.66m Base mounted on double rail for ease of use (self install only) MOT Approved Headlight Beam Tester - HGV 5.2 metre rail kit / column height: 1.66m Base mounted on double rail for ease of use (self install only) Sykes-Pickavant Ltd, Unit 4 Cannel Road, Burntwood Business Park, Burntwood, Staffordshire, WS7 3FU. United Kingdom Tel: +44 (0) Fax: +44 (0) sales@sykes-pickavant.com Distributor Stamp: ALL PRICES QUOTED EXCLUDE VAT & ARE SUBJECT TO AVAILABILITY - E&OE PRICES VALID UNTIL 30TH SEPTEMBER REF: SPQ316EURO COPYRIGHT SYKES-PICKAVANT LTD. ALL RIGHTS RESERVED.