Suspension & Tyres Protection

Transcription

1 Ball Joint Separator (Japnees Cars) Product Code : ITCP1015 Heat treated drop forged steel body Spreads ball joint easily where there are space constraints Jaws open 19mm Ball Joint Separator European Cars Product Code : ITCP1016 Special Alloy Steel forging for professional use 2-stage with thrust pin for fast change Jaws open 30mm Ball Joint Separator for trucks & Buses Product Code : ITCP1017 Heat treated drop forged steel body Spreads ball joint easily where there are space constraints Jaws open 70mm Adjustable Wheel Bearing lock Nut Wrench Set. Product Code : ITCP1018 Adjustable Jaws with locking feature to suit both hexagon and octagon wheel bearing lock nuts. Includes three sets of pins to suit lock nuts with pin holes Capacity: 6PT lock nuts 1-3/4 to 5-3/4 (49-135mm) 8PT lock nuts 1-3/4 to 5-5/8 (49-143mm) Pin diameters 1/4 (6mm), 5/16 (8mm), 3/8 (10mm) 100

2 Mcpherson Spring Compressor Product Code : ITCMSC 2000 Compresses all types of MacPherson style coil springs front and rear. Includes three sets of jaws (2) for mm, mm and mm springs found in most vehicles with McPherson struts. Can be used with impact wrench. The set comes with an adaptor to be used on conical springs. Maximum compression of 2 tonnes. Unit has a shear pin system so to ensure the system is not overloaded. Compatible with the Klann jaws. McPherson Spring Compressor Adaptor for BMW Product Code : ITCP1011 New spring adaptor for BMW / Renault and Toyota Avens is. BMW 5 series BMW 3 series Also enables spring compressor to be used on shorter / lower springs Vice Clamp for Spring Compressor Product Code : ITCP1012 To clamp the Spring Compressor to a bench vice or to a bench permanently Provides additional safety while handling springs during suspension maintenance Coil Spring Compressor 2pc (230 & 350mm) Product Code : 230mm ITCP1013 Product Code : 350mm ITCP1014 Carbon steel, hardened lead screws and cast jaws Wrap over coil claws for extra safety Suitable for use where space under wheel arch is limited 99

3 Universal Hub puller Product Code : ITCP1019 Ductile steel electrodeposition finished body with thrust bolt and tommy bar Suitable for four and five stud hubs Use with a 1/2"Sq drive ratchet wrench or with tommy bar supplied Brake Drum Removal Tool for Suzuki Product Code : ITCP1020 Universal Tool Suitable for all Maruti Suzuki Models PCD : 100mm & 150mm Front & rear wheels Simple Design Ease of use, improved productivity Ensures uniform load on all bolts (4 or 5 bolts) when brake drum is removed. Wheel Skate 570 kg Capacity Product Code : ITCP1021 Steel chassis with pedal operated mechanical lifting action Skate sits on easy rolling Ø50mm nylon castor wheels Composite rollers cradle vehicle s tyr caned are capable of handling up to 240mm profiles Suitable for showrooms, body shops, hotels, pubs and car parks - in fact anywhere a disabled vehicle needs to be moved. Note: Skates sold as singles, but must be used in pairs. Capacity: 570kg, Maximum Opening: 620mm, Maximum Tyre Profile: 240mm Castor Ø: 50mm, Weight: 17.5kg Wheel Dolly Set 454 kg Capacity Product Code : ITCP1022 Two pressed steel wheel dollies Capacity: 454kg/dolly. Ø90mm metal castors. Handles tyres up to 355mm profile. Suitable for use in bodyshops, workshops and car parks. Weight: 700g Capacity (Each): 454kg Maximum Tyre Profile: 355mm Weight (Each): 9kg Castor Ø: 90mm 101

4 Suspension & Tyres Spring Tester Product Code : ITCP1024 Torque Multiplier 1/2"-3/4"sq Drive ½ Sq Product Code ITCM1083 3/4 SqProduct Code ITCM1084 Robust construction with 1/2"Sq drive female input and 3/4"Sq drive male output Multiplication achieved by planetary gear train with a gear ratio of 3.3:1 Compatible with wide range of drive tools including torqueand ratchet wrenches Input Drive:½"Sq (Female) Output Drive:3/4"Sq (Male) Maximum Rated Input:300Nm Maximum Rated Output:1000Nm Length: mm Bearing & Bush Removal / Installation Kit 26pc Product Code : ITCP1023 Comprehensive kit for fast and effective removal / installation of wheel bearings, suspension bushes and seals. Reduces the possibility ofdamaging the bearing / suspension housings Supplied with four stepped end plates and four force screws in carry-case Plates and sleeves can also be used in a standard workshop press when in situ access isn't possible 102 Impact Socket Set 3pc Deep ½"sq Drive Product Code : ITCP1025 Manufactured from Chrome Vanadium steel,hardened, empered and with a phosphate finish for added corrosion resistance. Deep six-point WallDrive sockets allows a transfer of upto 30% more torque to the fixing Supplied in storage case

5 Composite Wheel Chocks 0.6kg - Pair Product Code : ITCP1029 Two composite wheel chocks with rubberized grip bases ensure that vehicle will not move when being Jacked or parked on an incline. Suitable for cars not exceeding 2tonne gross weight H 100 x L 185 x W 80mm Weight 0.3kg Rubber Wheel Chocks 4, 5.8 & 8.6 Kg - Pair Product Code 4 kg: ITCP1030 Product Code 5.8 kg: ITCP1031 Product Code 8.6 kg: ITCP1032 Two rubber wheel chocks ensure that vehicle will not move when being jacked or parked on an incline Suitable for cars and light vans not exceeding 4 tonne Heavy-duty Steel Wheel Chocks - Pair Product Code : ITCP1033 Two welded steel wheel chocks ensure that vehicle will not move when being jacked or parked on an incline Suitable for cars and light vans Tyre Livers Product Code :Tyre Liver 300mm ITCP10361 Product Code :Tyre Liver 450mm ITCP10362 Product Code :Tyre Liver 500mm ITCP10363 Forged Chrome Vanadium steel tyre lever, with hook and taper ends 103

6 Tyre Pressure & Depth Gauge Product Code : ITCP1034 Ergonomically designed, robust, tyre pressure gauge with integral tread depth gauge Rubber grips fit comfortably in the hand Push-button operation with backlit LED display for tyre pressure Read-out available in psi, bar, kpa or kg/cm² Integral tread depth gauge reads up to 22mm Auto-power-off Batteries supplied. Budget Tread Depth Gauge Product Code : ITCP1035 Large scale easy to read. Range :0 10 mm 2 /5,1 cm dial face Metal construction, comes with storage wallet and calibration button Tyre Depth Guage Digital Product Code : ITCP1036 Tough composite sliding gauge 10mm High figures in LCD display for ease of reading. Metric and Imperial calibration with conversion between the two. Zero setting control allows for comparative measurement. Range: 0-25mm/0-1" Resolution: 0.01mm/0.0005" Accuracy: ±0.02mm/0.001" Battery: LR44-1.5V Tyre Tread Depth Gauge - Pocket Type Product Code : ITCP1037 Chromed steel body with pocket clip Scale from 0 to 25mm in 1mm (0-1" in 1/32") graduations Range:0-25mm(0-1") 104

7 Tyre Inflator 0 12 Bar Product Code : ITCP1038 High quality European manufacturing bar (0-170psi) gauge. Clip-on chuck and pressure release button. Superb quality at a very affordable price. Jumbo Tyre Inflator with Clip-On Connector Product Code : ITCP1039 Composite body and dial type jumbo gauge with rubber protector Calibrated in bar and psi Fitted with 400mm rubber hose and single clip-on connector 0-15 Psi Performance Gauge Product Code : ITCP1040 Tags: 0-15 Psi Performance Gauge, mechanic, Tyre, Gauge, Tyre Gauge, PSI, Garage, technician, For low pressure racing tires 2 "Diameter Scale 0-15 psi 0-30 Psi Performance Gauge Product Code : ITCP1041 Tags: mechanic, gauge, tyre, 0-30 Psi Performance Gauge, tyres,vehicle, for low pressure motorsport tyres 2" diameter Scale 0-30 psi 0-30 Psi Tyre Pressure Gauge With Right Angled Connector Product Code : ITCP1042 Tags: 0-30 PSI Tyre Pressure Gauge Wit, tyre, gauge, 0-30 PSI & bar with right angled connector and hose Rubber gaiter not included 105

8 0-75 Psi 4 X 4 Tyre Pressure Gauge Product Code : ITCP HP with a dual-chuck (PSI only ) Tyre Pressure Gauge With Chuck & Hose Product Code : ITCP1044 Performance gauge 0-60 PSI & Bar with double chuck Very easy to use Tyre Pressure Gauge With Twinned Chuck Product Code : ITCP Bar (142 PSI) Tyre Pressure Gauge with Twinned Chuck for Twin Wheels Digital Tyre Inflator With Clip-on Connector Product Code : ITCP1046 Robust composite body with backlit LCD digital display Select between bar, psi, kg/cm² and kpa Features built-in LED work light for use in low visibility areas,auto power off (to preserve battery life) Supplied with 350mm rubber hose and clip-on connector Powered by 2 x AAA batteries (supplied) Range:0-255psi, 0-18bar, 0-18kg/cm², kPa Air Supply Maximum:18bar, 255psi, 18kg/cm², 1800kPa Inlet:1/4"BSP 106 Wheel balancing weight pliers Product Code : ITCP1047 Multi-purpose tool Primarily designed for the installation and removal of wheel balance weights Also includes tools for prising off wheel trims and preparing wheel balance weights., Length: 240mm

9 12v Air Compressor Product Code : ITCP1048-Digital Product Code : ITCP1048A-Analogue Fast, powerful, robust, easy to use, with flashing light 12v but very robust construction with high quality electric motor and compressor unit Plugs into the cigar lighter socket (with approx.12ft/3,65 m cable), comes with metal tyre valve connector and adaptors CE approved and ideal for cars, 4x4 and motor homes This unit does not have a preset facility as it is faster than normal compressors and it is not to be confused with cheap, ineffective items offered in mail order adverts this does what it is supposed to do! Mini Air Compressor 12v Product Code : ITCP1049 Sturdy composite casing incorporating cable tidy and plug storage Powered by 12V motor and is suitable for inflating tyres on cars vans and 4x4s Easy-to-read gauge shows pressures up to 17bar/250psi Compresses free air at the rate of 19ft³/hr Supplied with 3mtr power cable with in-line rotary power switch and plug for use in cigarette lighter socket, high pressure hose with locking connector and accessory kit including ball needle and adaptors for inflatables Model No: MAC1250 Hose Length: 400mm Power Cord Length: 3mtr Magnetic Camber Castor & King Pin Guage Product Code : ITCP1027 Robust, magnetic gauge mounts onto hub for quick and accurate measurement of camber, castor angles and kingpin inclination. Two large adjuster knobs, one for conveniently zeroing bubble during angle measurement and one for adjusting kingpin inclination Camber gauge with fixed graduation from +5 to -5. Adjustable castor gauge graduated from +11 to -3 Kingpin gauge graduated from 0 to 14 left to right Supplied in tough composite carry-case 107