NEW PRODUCTS & SPECIAL OFFERS

Transcription

1 OCTOBER - DECEMBER 2014 Specialist Tool Solutions PRODUCTS & SPECIAL OFFERS LAND ROVER D3 / D4 BUSH SOLUTION / THE BEST SELLING SLEEVE KIT RANGE JUST GOT BIGGER & BETTER!!! INCLUDES LAND ROVER TOOLS, BRAKING, SUSPENSION, DIESEL BLEEDING, PULLERS, INJECTOR REMOVAL & MORE!

2 LAND ROVER Land Rover Bush Kit Sykes-Pickavant have developed a solution for the efficient removal and refitting of bushes on traditional Land Rover models For radius arm, panhard bushes & general suspension bushes Dedicated shaped press pieces for correct location / alignment Removal Insertion Suitable for Land Rover Models: Defender, Discovery 1 & 2, Classic Range Rover, Range Rover P38A & older Series Land Rovers Available Options Part No. Description Contents Price Land Rover Bush Press Kit * * Land Rover Bush Kit Press Frame Option Land Rover Bush Kit Press Frame Only Option Land Rover Bush Kit C Clamp Option MADE IN THE UK Kit includes 6 Adaptor Pieces for use in a workshop press with suspension parts removed from vehicle Kit includes 6 Piece Adaptor Set, step plate, press frame, adaptor ring & 12 Tonne SP hydraulic ram Kit includes 6 Piece Adaptor Set, step plate, press frame & adaptor ring, for customers who already have an SP hydraulic ram Kit includes 6 Piece Adaptor Set, step plate & C Clamp for minimal vehicle strip-down *Note - With certain large radius arm bushes, the adaptor pieces can still be used with a workshop press or C Clamp Land Rover Swivel Ball Joint Kit A new on vehicle solution for the removal and replacement of twin swivel ball joints as fitted onto the front axles of two popular Land Rover models: Discovery & Range Rover P38A Uses the Sykes-Pickavant 187 Hydraulic Series press frame to deliver 12 tonnes of force, for a take the press to the vehicle solution (Inc in only) Designed, tested and manufactured in Great Britain Available Options Scan the following QR codes to watch videos of the kit in action Part No. Description List Price Save Offer Price Adaptor Set only Adaptor Set plus Press Frame, Adaptor Ring & Ram Adaptor Set plus Press Frame & Adaptor Ring Scan the following QR codes to watch videos of the kit in action Overview Removal of front axle swivel ball joint Insertion of front axle swivel ball joint Multi-application Step Plate New single piece stepped press frame plate Allows for many different sized press pieces to fit positively into the frame for precise work V2 Universal Press Frame c/w 12 tonne Hydraulic Ram Updated unit now provides greater power Open frame design - 200mm of clearance through the press frame Includes adaptor ring ( ) for use with and related press piece sets Ideal for use with individual model specific press piece sets OFFER SAVE LIST PRICE

3 Land Rover Discovery 3 & 4 Suspension Bush Master Kit A comprehensive solution specifically designed for removal of seized / corroded bushes and installation of replacement bushes for Land Rover Discovery 3/4 and Range Rover Sport models Available kits are as follows: - Master Kit - Front lower - Front upper - Rear lower - Rear upper MADE IN THE UK Only the bushes have to be replaced, saving the cost and time in replacing the complete arm Lower arm bushes can be replaced on vehicle without having to remove the wheel Individual press frame pieces for each wishbone To be used in conjunction with the SP Universal Press Frame ( ) and due to the nature of corroded components, the power of the SP 12 Tonne Hydraulic Ram is also required ( ) (Can be purchased together as V2 - Universal Press Frame c/w 12 Tonne Hydraulic Ram) The SP Vibro Impact Air Hammer and SP Induction Heater can be used to assist in the removal of corroded suspension bolts and bushes - See QR code below LAND ROVER Tel: Other available options Part No. Description Price Scan the QR code to watch a video of the Vibro Impact Air Hammer & SP Induction Heater removing the suspension bush bolts Land Rover Discovery 3 & 4 Front Lower Kit Land Rover Discovery 3 & 4 Front Upper Kit Land Rover Discovery 3 & 4 Rear Lower Kit Land Rover Discovery 3 & 4 Rear Upper Kit Land Rover Viscous Fan Tool Set Use both tools together to replace the cooling fan on Land Rover Discovery 3, Range Rover 3 and Range Rover Sport models Extra long, thin design for easier working in confined spaces Length: 650mm

4 Land Rover Drop Arm Puller Extra heavy duty puller for the removal of drop arms from the toughest of vehicle applications Ideal for Land Rover Discovery 1 & 2, Range Rover P38, Land Rover Defender and Ford Transit applications The puller is designed to be used with the steering box already removed from the vehicle Includes a force screw allowing a technician to effectively shock the drop arm to become loose from the steering box Jaw spread capacity - 60mm Jaw reach capacity - 80mm V2 Diesel Injector Puller Suitable for Discovery 1, Defender and older Series Land Rovers For use with Lucas & Bosch type clamp-down injectors Slide hammer mechanism c/w M8, M12 & M14 adaptors Universal tool with a wide variety of Car, LCV & HGV applications Includes M17 adaptor for GM Vauxhall / Opel injectors (X20DTH / Y20DTH series engines) OFFER SAVE LIST PRICE OFFER SAVE LIST PRICE Scan the QR code to watch a video of the Land Rover Drop Arm Puller Land Rover TD5 Compression Tester The only tool available to fully test the compression of all 5 cylinders For use with existing Sykes-Pickavant compression test kits to measure cylinder compression on 5 cylinder diesel Land Rover TD5 engines made between 1998 & 2005 Unique tool that fits in place of original high pressure fuel injector - not the glow plug Original injector clamps hold adaptor tightly in place to create gas tight seal LAND ROVER UPDATED KIT V2 Diesel Engine Compression Test Kit - Land Rover Updated kit now includes TD5 Compression Tester Comprehensive test kit for Land Rover diesel injected engines Checks engine compression under cranking conditions Enables cylinder access through dummy glow plug adaptors Built-in pressure relief valve enables repeat tests without dismantling Contents: (Supplied in box and foam) bar pressure gauge and 4 x Glow Plug adaptors Applications include: - Defender MK2 & MK3, Discovery 2, 3 & 4, Range Rover Sport & Range Rover 3, Freelander 1 & 2 and Evoque Other adaptors for older Land Rovers are also available on request Premier Low Pressure Fuel Test Kit A comprehensive high quality OEM standard low pressure diesel and petrol pressure kit Includes: - Shock protected, fuel resistant dual scale gauge to 10 bar / 145psi - Relief valve for safe de-pressurisation Vacuum gauge assembly - Fuel tap and T-connector assembly - 4 x Schrader valve connectors - Quick-coupling adaptors and connectors with reinforced hoses and brass fittings Latest fittings for Jaguar Land Rover variant engines Supplied with easy to follow fitting / application instructions Applications include: Alfa, Audi, BMW, Chrysler, Citroen, Ferrari, Fiat, Ford, GM, Jaguar, Land Rover, Mercedes, Mini, Peugeot, Renault, VW & Volvo

5 XS Sleeve Kit - Basic Contains 10 x Press Sleeves in 2mm diameter steps Inside Diameter Range: 14-32mm Outside Diameter Range: 24-42mm Includes extension spindle with thrust bearing, lock nuts and grease Supplied in moulded storage case XS Sleeve Kit - Master Contains 10 x Press Sleeves in 2mm diameter steps Inside Diameter Range: 14-32mm Outside Diameter Range: 24-42mm Includes 2 x spindles, 4 x stepped back plates, extension spindle with thrust bearing, lock nuts and grease Supplied in moulded storage case Tel: Universal Press & Pull Sleeve Kit - Car / LCV Kit Universal applications - Car - LCV Contains 20x Press Sleeves in 2mm diameter steps Inside Diameter Range: 34-72mm Outside Diameter Range: 44-82mm 4x Step Plates / 4x Pulling Spindles with thrust bearings Supplied in moulded storage case Universal Press & Pull Sleeve Kit - SUV / LCV For use as an add-on to the Standard Press & Pull Sleeve Kit ( left) Allows access to a wider range of vehicles - e.g. SUV s & LCV s Contains 8 x Press Sleeves in 2mm diameter steps Inside Diameter Range: 82-88mm and mm Outside Diameter Range: 92-98mm and mm 4 x Step Plate Discs 2 x 20mm Pulling Spindle Adaptors with Thrust Bearings M20 SUSPENSION OFFER SAVE LIST PRICE Universal Press & Pull Sleeve Kit - Commercial Vehicle Complete kit for SUV, LCV, PSV, HGV Contains 20x Press Sleeves in 2mm diameter steps Inside Diameter Range: mm in 2mm steps Outside Diameter Range: mm in 2mm steps 4x Step Plate Discs / 4x Pulling Spindles with nuts & thrust bearings M10 / M12 / M14 / M16 2 x 20mm Heavy Duty Pulling Spindles (M20 long & M20 short) with thrust bearings OFFER SAVE LIST PRICE Scan the QR code to watch an overview video of Suspension Removal & Installation Tools OFFER SAVE LIST PRICE Upgrade Kit - From to Upgrade kit from to complete For owners of kit (SUV / LCV - above) who wish to upgrade to the full contents of the combined LCV / HGV Kit ( left) OFFER SAVE LIST PRICE

6 SUSPENSION ON CAR SOLUTION For a full applications list, please visit our website V2 Ford & Volvo Rear Bush Tool Kit Now also capable of installing & removing the longer bush as fitted onto the nearside of newer model Volvo cars Individual press piece kit for dismantling and installing the rear wishbone / trailing arm bush Correctly aligns & sets bush depth in trailing arm upon installation, so not to tear bush Suitable for: Ford: Mondeo & Mondeo Estate 07- S-Max & Galaxy 06- Volvo: XC70 & V XC S60 & V UPDATED KIT Fiesta & Focus Master Bush Kit including Press Frame & Pressure Screw Kit includes adaptor set for the removal and installation of trailing arm bushes, Press Frame and Pressure Screw Bush OEM Reference Numbers: Fiesta , , 96FB5K653CA Focus , Focus Applications: - C-MAX 07- MPV - MKI Estate, Hatchback, Saloon, Van - MKII 04- Convertible, Hatchback, Saloon, Van - Kuga 08- Off Road - Mazda 3 (BK) Saloon, Hatchback - Mazda 5 (CR/CW) 05- MPV - Volvo C Hatchback - Volvo C70 II 07- Cabrio - Volvo S40 II Saloon - Volvo V Estate Fiesta Applications: - Fiesta KA Puma Available Options Adaptors in the following kits can be used in a press frame with either a pressure screw (recommended) or a hydraulic ram Fiesta Adaptors Focus Adaptors OFFER SAVE LIST PRICE Suitable for both standard and new longer bushes MADE IN THE UK Part No. Description Price Includes Adaptor Set for Fiesta & Focus Bushes, Adaptor Ring and Pressure Screw * Adaptor Set for Fiesta Trailing Arm Bushes * Adaptor Set for Focus Trailing Arm Bushes *Note - Adaptor Ring required Press Frame Pressure Screw To be used in press frame instead of ram for faster operation where greater travel is required to remove / install bushes The screw has a fine thread and roller bearing for ease of use Universal Press Frame Includes adaptor ring ( ) for use with and related press piece sets Can also be used with 8 or 12 Tonne SP hydraulic ram and press frame pressure screw OFFER SAVE LIST PRICE Adaptor Ring Ring sits in press frame to hold adaptors in place 25.95

7 FREE PSA Adaptor Plate ( ) A bespoke add on kit for use on PSA 2.0 & 2.2 litre HDi diesel engines M9R Renault Kit ( ) Applications: Renault / Nissan / GM Dci 2 litre engines (M9R) WHEN YOU PURCHASE V2SP OR V2SP WORTH ! Hydraulic Injector Puller Systems Updated kits now include a set of solenoid sockets ( ) and 2 x tamperproof sockets For the removal of stubborn injectors Provides controlled force to aid the removal of seized injectors where there is insufficient access for traditional slide hammers Uses a multi-position frame, with adjustable legs of different lengths and a selection of mounting adaptors to allow alignment of the tool with the injectors on a wide variety of modern diesel engines The combination of variable leg lengths and selection of the appropriate adaptor for the cylinder head, allows the tool to be correctly positioned on most cylinder heads Supplied with injector adaptors for most modern injector types: M14 M16 M17 M20 M25 M27 Tel: V2SP Hydraulic Injector Puller Kit 10 tonnes Hydraulic Hollow Cylinder provides the force use with standard hydraulic pump (not supplied) V2 Diesel Injector Seat Cleaner Set Cleans injector seats and chambers when changing or reconditioning diesel injectors Helps to avoid blow-back due to poorly seated injectors Now includes: - Removal tool for copper washers - Injector blanking plugs to avoid debris entering the cylinders - Wire brush cleaning set for chamber walls - Centralising stem to improve correct cleaning seating angle OFFER SAVE LIST PRICE Common Rail Twin Injector Puller Attachment Enables two injectors to be removed at the same time as shared injector clamp hinders removal of injectors individually Suitable for use with Kit below and V2 Hydraulic Injector Puller Kit Commonly found on 1.3 engines: Alfa: Mito, Fiat: 500 / C, Doblo / Cargo, Fiorino, Grande Punto, Idea, Linea, Panda, Punto Evo, Qubo, Strada, Ford: Ka, Lancia: Musa, Ypsilon, Opel: Agila, Astra H, Corsa D, Meriva, Vauxhall: Astra MK V, Corsa MK III and Meriva OFFER SAVE LIST PRICE V2SP Mechanical Hydraulic Injector Puller Kit As per V2SP kit (left) but includes a mechanical hydraulic ram Allows use of the kit without the need for a separate hydraulic pump Universal Injector Seat Cleaner Set Designed to clean the injector holes after extraction work Kit includes: - 20mm & 25mm metal brushes for injector hole cleaning - 1 x seal plug to close the injector hole while cleaning - 2 x front brushes for injector seat cleaning - 1 x front brush extension - 1 x seal plug holder to place and remove the plug - 1 x sanding kit OFFER SAVE LIST PRICE Scan the QR code to watch a video of the 1.3 Common Rail Twin Injector Puller Attachment DIESEL INJECTOR REMOVAL Heavy Duty Slide Hammer Injector Remover Kit Heavy Duty Slide Hammer puller for removal of Bosch, Delphi, Denso and Siemens injectors Features a flexible u-joint adaptor for access in restricted areas Contains 6 x Injector adaptors: M14 x 1.5, M16 x 1.0, M17 x 1.0, M20 x 1.0, M25 x 1.0, M27 x x Injector Solenoid removers: M25, M27, M29, M30-2 x Nozzle Extractors: 6mm Tamperproof: 10mm hex - 7mm Tamperproof: 10mm hex Heavy Duty Slide Hammer: Hammer Weight: 5.0kg (Total Weight: 8.0kg) Supplied in blow-moulded case OFFER SAVE LIST PRICE

8 COMPRESSION & PRESSURE TESTING Diesel Engine Compression Test Kit - Common Rail Diesel (CRD) Covers a wide range of modern CRD diesel injected engines Checks engine compression under cranking conditions Enables cylinder access through dummy injector and glow plug adaptors Built-in pressure relief valve enables repeat tests without dismantling Supplied in plastic case with foam insert Contents: - Gauge & Hose Assembly - 15 x Dummy Glow Plugs - CRD Dummy Injector & Clamps OFFER SAVE LIST PRICE V2 Common Rail Diesel (CRD) High Pressure Test Kit Updated kit now includes unique pressure limiting valve in-built to prevent extreme pressures building in test kit during engine cranking Measures delivery pressure output from the CRD (Common Rail Diesel) High Pressure pump under engine cranking conditions Cranking test to show a healthy 250+ Bar output, gauge reads up to 600 Bar. Tell-tale needle shows maximum pressure achieved during cranking test High pressure test gauge allows direct connection to the high pressure pump, providing cranking pressure measurement of the pump M12 x 1.5 & M14 x 1.5 connections Includes shaped high pressure connector pipes (x5) to connect and cover many applications and supplied in a plastic case V2 Diesel Engine Compression Test Kit - Standard Car Kit For both direct and indirect diesel injected engines Checks engine compression under cranking conditions Enables cylinder access through dummy injector and glow plug adaptors Built-in pressure relief valve enables repeat tests without dismantling Supplied in plastic case with foam insert Specification: 560mm Rubber Hose Gauge Scale: 0-60bar, 0-860psi Gauge Diameter: 83mm OFFER SAVE LIST PRICE Oil Pressure Test Kit Helps to diagnose worn oil pumps and engines, faulty oil pressure Petrol Engine Compression Tester switches and pressure warning indicators Specially designed for deep seated spark plug ports Shock protected dual scale gauge, for with long narrow threads, as found on many modern quick & accurate oil pressure checks petrol engines Permanently oil primed, 1m long Positive lock - quick release connector, ensures flexible hose, enables access to adaptors cannot accidentally be left in the spark plug difficult to reach oil switch ports port (which would then become extremely difficult Small profile, quick coupling to remove with deep seated plug ports) adaptors with built-in shut-off Specially designed self-centering adaptors valve ensure minimal risk of cross threading 10 x oil switch port adaptors when attempting to screw the compression Supplied in plastic case with OFFER adaptor into the spark plug port foam insert SAVE Supplied in plastic case Gauge Scale: 0-10bar, LIST PRICE with foam 0-150psi insert Gauge Diameter: 80mm Specification: OFFER SAVE LIST PRICE Gauge Scale: 0-20bar, 0-190psi Gauge Diameter: 83mm Common Rail Diesel (CRD) Fuel Return Flow Kit Designed for use on the injector return side of a CRD system Helps to diagnose: Poor or no engine starting/ Poor engine running / Poor acceleration / General lack of engine power Compact acrylic block design provides easy to read cylinder comparison Fuel resistant, highly flexible rubber hoses Suitable for solenoid injectors only Contents: (Supplied in plastic case) - Graduated acrylic measuring block for up to 6 cylinders - Injector adaptor sets for: Bosch / Delphi / Denso / Siemens - Set of reduction pipes for small diameter flow back ports - Under bonnet hanging hook UPDATED KIT Scan the QR code to watch a video of the CRD Fuel Return Flow Kit OFFER SAVE LIST PRICE

9 960200SP SP Induction Heater + with Coil Kit ( ) The SP Induction Heater + is a redesign and upgrade of the popular Mini-Ductor II Uses new engineering technology for increased energy efficiency and ease of use. Now you can use the power of technology with a flameless heat to quickly release corroded or seized components and other metallic parts. All without the damage normally associated with gas torches. Heats in seconds! Key features of the SP Induction Heater + Specifically designed for the UK/EU: 230v/6 amp/1000 watt with full CE certification Operates cooler for better efficiency, handling and product longevity Carry Case; with storage for all attachments, fits in tool chests for security Long operating cycle time A true 1,000 watts max output power available LED work light illuminates work area Integrated CE filter improves handling of product 1 year warranty - Parts/Labour Includes rope, u-form & pre-formed coil STAR BUY INCLUDES SP INDUCTION HEATER + & SP COIL KIT OFFER SAVE LIST PRICE Tel: SP SP Rope Coil Set - x3 Set of three highly adaptable coils allows user to shape to suit Use three / four windings of coil for maximum performance OFFER SAVE LIST PRICE SP Coil Kit Contains 8 x popular sizes of interchangeable coils Supplied in protective case SP Heat Pad Removal of decals, graphics, stripes, emblems & body mouldings etc Softens the adhesive to make removal simple & effective WORKSHOP TOOLS SCAN THE QR CODE TO WATCH A VIDEO OF THE VIBRO IMPACT AIR HAMMER AND SP INDUCTION HEATER+, THAT WHEN USED TOGETHER, CREATE A POWERFUL SOLUTION FOR SUSPENSION BOLTS THAT ARE RUSTED IN TIGHT ON A VEHICLE Vibro-Impact Air Hammer A unique concept to aid the removal of seized suspension parts The Vibro-Impact system allows for the controlled application of force via an air powered Impact Hammer Allows the operator to control & gradually increase the force being applied, in order to loosen seized components Features a built-in shock-absorber in order to minimise risk of damage if too much pressure is accidentally applied Low vibration for user comfort Supplied with a handy wall mounted storage bracket and a set of four impact hammers for variable applications OFFER SAVE LIST PRICE Scan the QR code to watch a video of the Vibro-Impact Air Hammer 8

10 The GEN 2 type of wheel bearing is predominantly fitted to models from Ford, Land Rover, Mazda, VW Group and Volvo Includes a variety of different diameter tool kits covering a range of sizes to suit the different GEN2 bearings used by vehicle manufacturers Designed to distribute pressing force evenly through the outer bearing race and also allows for the suspension leg to remain in-situ on the vehicle when fitting new bearings Scan the QR code to watch a video of the 72mm GEN2 Bearing Tool Ford 82mm Bearing VW Group Bearing BEARING REMOVAL / INSTALLATION COMBINATION KITS: Part No. Size Applications Price V2 72mm 78mm 82mm 78mm 82mm 62mm 66mm 72mm 85mm 62mm 66mm 72mm 78mm 82mm 85mm INDIVIDUAL KIT SIZES ALSO AVAILABLE - CONTACT CUSTOMER SERVICES FOR DETAILS Essential Kit 72mm - Audi A1, Audi A2, Seat Cordoba, Ibiza, Skoda Fabia, Roomster, VW Polo (Front), VW Fox with PAS (Front) 78mm - Ford Focus II, C-Max, Volvo C30, C70, S40, V50 (Front), Mazda 3 82mm - Ford Mondeo, Galaxy, S-Max, Land Rover Freelander 2, Volvo S80, V70, XC60, XC70 Ford / Volvo / Land Rover / Mazda Combined Kit 78mm - Ford Focus II, C-Max, Volvo C30, C70, S40, V50 (Front), Mazda 3 82mm - Ford Mondeo, Galaxy, S-Max, Land Rover Freelander 2, Volvo S80, V70, XC60, XC70 VW Group Kit 62mm - Audi A2, VW Lupo (Front) 66mm - Skoda Fabia, VW Fox (Front), Polo 72mm - Audi A1, Audi A2, Seat Cordoba, Ibiza, Skoda Fabia, Roomster, VW Polo (Front), VW Fox with PAS (Front) 85mm - VW Multivan, Touareg, Transporter (Front / Rear) All Sizes Master Kit 62mm - Audi A2, VW Lupo (Front) 66mm - Skoda Fabia, VW Fox (Front), Polo 72mm - Audi A1, Audi A2, Seat Cordoba, Ibiza, Skoda Fabia, Roomster, VW Polo (Front), VW Fox with PAS (Front) 78mm - Ford Focus II, C-Max, Volvo C30, C70, S40, V50 (Front), Mazda 3 82mm - Ford Mondeo, Galaxy, S-Max, Land Rover Freelander 2, Volvo S80, V70, XC60, XC70 85mm - VW Multivan, Touareg, Transporter (Front / Rear) OFFER SAVE LIST OFFER SAVE LIST OFFER SAVE LIST PRICE Note: Spare Parts are available for all kits. Please see our website / catalogue Universal Wheel Bearing Kit For the removal and installation of flanges and wheel bearings, without the need for removal of suspension struts or wheel hubs from the vehicle (where access permits) Remove and install wheel bearing without hub removal - Removes the need to remove stubborn hub pinch bolt found on modern VW Group vehicles such as Audi A4, VW Passats etc Tool configures square to bearing No more having to square hub assembly on hydraulic press Bearings fitted on nut assemblies Greatly reduced drag in pushing bearing in/out Flange extraction bolts supplied - Reduces time taken to complete overall job

11 Universal Clutch Alignment Tool Kit Vehicle Fluid Change Syringe - 1.5L Transparent design to easily view the fluid Suitable for fluid suction and supply in vehicle service Ideal for applications such as engine / gear oil & differential fluid 1.5L capacity with rotative switch off OFFER SAVE LIST PRICE OFFER SAVE LIST PRICE For modern front wheel drive vehicles with or without pilot / spigot bearings with flywheel fitting diameters from 12 20mm The tools main advantage is that it includes parallel expanding supports in place of more traditional tapered fittings that are hard to keep located Easy to swap over adaptors suitable for clutch centre sizes from 14.4 to 29mm Includes small cone: mm, large cone: mm and sleeves: 12, 14, 15, 16, 17, 18, 19, 20mm GM Gearbox Bearing / Race Remover For the removal of taper bearing cups from clutch housings in M32, MT 20-6 and MT 32-6 manual gearboxes Specifically designed to spread the load equally without danger of cracking the gearbox casing Applications: Widely used in GM, Saab and Fiat Group STAR BUY SAVE Tel: Scan the QR code to watch a video of the GM Gearbox Bearing / Race Remover ENGINE SERVICE V2 29 Pc. Alternator Free Wheel Pulley Set Special set of Spline & Torx Socket Bits for the removal of free-wheel alternator pulleys Locks the alternator, allowing the central locking bolt of the pulley to be released Selection of 33 tooth reaction nuts and additional adaptors Updated 29 piece set covers a range of popular applications including: BMW, Citroën, Fiat, Ford, Mercedes, Opel, Peugeot, Porsche, Renault, Toyota, VW Group, Vauxhall, Volvo Applications list included - Visit for full details OFFER SAVE LIST PRICE Adjustable Oil Filter Remover - 3 leg Spider-type wrench, c/w geared legs which automatically tighten as the force is applied Range: 62 to 93mm diameter 3/8 sq. dr c/w with adaptor for 1/2 sq.dr. and / or 19mm hex Strap Type Oil Filter Remover - For all filters up to 300mm diameter Multi-purpose strap wrench, ideal for all oil filters up to 300mm circumference Range: 20 to 300mm diameter Strap Length: 1 metre long & 40mm wide Strong steel shank and polyester strap Self tightening band designed for fast and secure filter removal Double ended 13/16 hex c/w 3/8 & 1/2 sq. dr OFFER SAVE 9.55 LIST PRICE OFFER SAVE 5.00 LIST PRICE

12 SUSPENSION Size Ball Joint Separator Drop forged rugged, flat design with 3 interchangeable forks Forks are attached to the centre screw to allow continuous adjustment within the jaw capacity range Features an internally operated drive spindle (M24) and an elongated recess in the forks, providing a safe & secure operation Jaw capacity range: 30-65mm 3 x fork sizes: 24, 27 and 31mm Ideal for use on vehicles: Audi / VW (A3, A4 and A6 with double wishbone), BMW & Mercedes-Benz Internal Coil Spring Compressor Specially designed for vehicles with front or rear wishbone suspension Designed to fit applications where the access hole in the lower wishbone is as small as 30mm diameter Unique Torque Safety Key extends functionality and adds safety - 100Nm max torque and allows for use with an impact wrench Supplied with two pairs of specialist jaws from 90mm to 140mm diameter Full applications list included in kit & OFFER SAVE LIST PRICE Heavy Duty Coil Spring Compressor Unique Sykes-Pickavant design of vice-mounted Coil Spring Compressor Features double-ended hex drive (2 x 24mm hex) for ease of use - Can be operated from either end using ratchet or 24mm wrench - Can be safely unwound in the event of shear pin failure Hex drives at both ends, incorporate shear-pins for safety - Features external thrust bearing for ease of service - Heat treated, Self-lubricating operating screw Safe Working Load = 15000N Supplied with two sets of universal jaws: - Medium Jaws: mm diameter - Large Jaws: mm diameter Note: Series jaws can also be used with (Requires Screws) N.B. Not recommended for use with Air / Electric Impact Power Tools available on website: Safe working load of 2500kg (25000N) Fits a wide variety of vehicles with wishbone suspension including: BMW / Citroën / Chrysler / Honda / Hyundai / Kia / Mazda / Mitsubishi / Peugeot / Renault / Seat / Skoda / Suzuki / Toyota / Volvo / Volkswagen OFFER SAVE LIST PRICE Ball Joint Separator HGV applications Strong, heavy duty body, with strengthened fork and lever, allows for greater force to be applied Can be upgraded to hydraulic power Jaw Opening: 70mm Jaw Throat Width: 36mm Jaw Throat Depth: 50mm OFFER SAVE LIST PRICE V2 12 Tonne Hydraulic UPDATED KIT Ball Joint Separator Updated kit now uses power from the SP 12 tonne hydraulic ram Hydraulic version of the HGV Ball Joint Separator (above) Specification: - Jaw Opening: 70mm - Jaw Throat Width: 36mm - Jaw Throat Depth: 50mm OFFER SAVE LIST PRICE Extra Heavy Duty Coil Spring Compressor c/w Universal Multi-Purpose Jaws Safe working load 2250kg (22500N) Supplied with 1 x pair of universal MULTIPURPOSE jaws - Patented innovative shape of jaw design fits most types and sizes of springs - Protective high-tech inserts in jaw for added safety - Jaws diameter mm covers 90% of applications Built-in protective accessory for vice clamping Overload shear pin for safe operator use Large user friendly adjustable handle for fast jaw positioning TUV approved Specialist jaw options available Supplied with instructions & vehicle applications OFFER SAVE LIST PRICE Coil Spring Adaptor Kit Spacer Block for use with asymmetric / tapered springs to raise jaw height at one end only (Available individually ) Extensions (pair) for use with extra long strut assemblies (Available individually ) OFFER SAVE LIST PRICE Extensions (Pair) Spacer Block

13 Ford Transit Bearing Press Kit Successful removal of troublesome inner bearing race and reinstallation of complete bearing assembly For the removal and installation of the front wheel bearing on Ford Transits with the aid of a workshop press Removes and installs bearings on both 5 and 6 stud hubs Removes the inner and outer bearing race Contents include: - Hub support for new bearing installation - 5 x supporting pillars & stand for bearing removal - 2 x adaptors for insertion and removal - Special separator for inner ring removal V2 Ford Transit Hub & Front Wheel Bearing Remover Kit Updated kit now includes larger hub plate and extra-long pillars to enable removal of hubs and front wheel bearings on six stud Transits For Ford Transit Mk6 & Mk7 Hub and complete front wheel bearing removal Features a heavy duty slide hammer which operates in two directions to achieve multiple operations in one tool Provides three different solutions in one kit: - Can be used as a traditional hub puller - Remove the stubborn inner bearing race - Use the slide hammer in the reverse direction to remove the outer bearing race Scan the QR code to watch an overview video of the Ford Transit Bearing Press Kit UPDATED KIT Tel: Hub Removal Outer Bearing Race Removal Ford Transit Press Upgrade Kit Set of tools to enable the and V2 kit (above) to be used in a workshop press Suitable for use on Ford transits Removes and installs bearings on both 5 and 6 stud hubs Removes the inner and outer bearing race Contents include: - Hub support for new bearing installation - 5 x extra long supporting pillars for bearing removal - 2 x adaptors for insertion and removal Inner Bearing Race Removal IN 1 TOOL MADE IN THE UK Ford Transit Hub & Front Wheel Bearing Remover - Upgrade Kit Includes larger hub plate and extra-long pillars enabling owners of the kit to remove hubs and front wheel bearings on six stud Transits SUSPENSION Ford Transit Ball Joint Tool For the removal & installation of the lower front ball joints as found on Ford Transits On vehicle solution provides time saving benefits Tool designed to access the awkward location of the ball joint Manual option includes screw converter allowing the user to utilise an existing SP hydraulic ram Hydraulic option includes 12 Tonne SP hydraulic ram ON VEHICLE SOLUTION Part No. Description Price Manual Option Hydraulic Option *Note - Hydraulic ram included in only Scan the QR code to watch a video of the Ford Transit Ball Joint Tool - Hydraulic Version 12

14 Motorq 20-3/8 Push-Thru Torque Wrench /8 push thru sq dr 4-20 Nm / 3-15lbs.ft Length: 210mm Weight: 0.40kg OFFER SAVE LIST PRICE Motorq 100-3/8 Push-Thru Torque Wrench /8 push thru sq dr Nm / 15-74lbs.ft Length: 356mm Weight: 0.75kg Motorq 60-3/8 Push-Thru Torque Wrench /8 push thru sq dr 8-60 Nm / 6-45lbs.ft Length: 305mm Weight: 0.60kg OFFER SAVE LIST PRICE OFFER SAVE LIST PRICE Motorq 200-1/2 Push-Thru Torque Wrench /2 push thru sq dr Nm / lbs.ft Length: 455mm Weight: 1.00kg OFFER SAVE LIST PRICE TORQUE Motorq 300-1/2 Push-Thru Torque Wrench /2 push-thru sq dr Nm / lbs.ft Length: 570mm Weight: 1.40kg Motorq 330-1/2 Push-Thru Torque Wrench /2 push-thru sq dr Nm / lbs.ft Length: 690mm Weight: 1.40kg OFFER SAVE LIST PRICE OFFER SAVE LIST PRICE Motorq 399-3/4 Push-Thru Torque Wrench /4 push-thru sq dr Nm / lbs.ft Length: 690mm Weight: 2.10kg OFFER SAVE LIST PRICE Motorq 400-3/4 Push-Thru Heavy Duty Torque Wrench /4 push-thru sq dr Nm / lbs.ft Length: 1090mm Weight: 6.00kg OFFER SAVE LIST PRICE Motorq 500-3/4 Push-Thru Heavy Duty Torque Wrench /4 push-thru sq dr Nm / lbs.ft Length: 1470mm Weight: 7.00kg OFFER SAVE LIST PRICE

15 EGR Valve Activator For testing & cleaning valve as part of routine servicing - no need to remove valve from vehicle for use Prevents the unnecessary replacement of EGR Valves Actuates EGR Valves in a fixed open position for cleaning, and in an open / closed sequence for freeing carbon deposits Choice of two test cycles: At the end of either test cycle the tool gives an audible indication when a faulty and unserviceable EGR valve is connected Supplied with x3 connectors for different makes of valves Power Supply: V mains Open / Close Time Cycle: 90 sec Includes applications list - visit for details Wireless Electronic Stethoscope Kit - ChassisEAR Designed for the detection of vehicle noises e.g. rattles, squeaks and air ingress under load, during a road test and for the diagnosis of a wide variety of potential faults e.g. wheel bearings, CV joints, differentials, transmission, injectors, alternators, water pumps, AC compressors and many more. Can be used on cars, vans, trucks, buses etc as there are no cable length issues to overcome Consists of Receiver Unit, 4 x Transmitter Units (4 channels), 4 pick-up leads, pick-up fixing straps, headphones, batteries, manual & storage case N.B. Due care & consideration should be taken of driving conditions and regulations when operating the ChassisEAR on the road. MADE IN THE UK PP319FT Power Probe III Circuit Tester Flame print design Relay & Component Tester Voltmeter Bad ground indicator Continuity Tester Positive / Negative voltage indicator 20 foot jump lead set Scan the QR code to watch a video of the EGR Valve Activator OFFER SAVE LIST PRICE SPe Automotive Electronic Workshop Tool For use on modern vehicles equipped with an EOBD socket, which have a range of on-board Electronic Control Systems (ECU s) fitted for monitoring and controlling critical vehicle functionality Ideal tool for use in Diagnostic specific workshops Extra features include DTC Scanning & Clearing, Engine component parameter adjustments & resetting, Injector and Fuel Component Coding & much more! For further details and to read more about SPe and its features, please visit our website: SP Portable 4 Gas Analyser with Printer Developed from the gas analyser For fault diagnosis, tuning and pre-mot testing Truly portable hand-held gas analyser - Ultra light weight - only 1.1kg Measures CO, HC, CO2, O2 (NOx model option available on request) to Class 1 accuracy Suitable for both petrol and LPG vehicles and ideal for both static and dynamic testing Provides Lambda / AFR measurement and corrected CO Internal memory stores up to 250 test results - manual & automatic recording options Pump speed control - Improves battery life Up to 4 hours internal battery life Bluetooth connectivity to PC (additional software required) Large graphic display Free analytical software available to download Includes printer and AC / 12v chargers V2 TPMS PLUS - High Level Diagnostic TPMS Tool Sensor Activation - Sensor Checking - Sensor Replacement Able to re-program Clone valves wirelessly without using a PC or docking station Approved for use with Schrader & Alligator EU frequency re-programmable TPMS valves - Step by step guidance for valve cloning - Able to copy old valve ID or create new ones Connects to TPMS ECU via EOBD diagnostic lead (Containing full multiplexing functionality) Sensor re-programming via the EOBD socket Sensor & TPMS ECU fault code reading / deletion STAR BUY For further details and to read more about TPMS and its features, please visit our website: Tel: TESTING 14

16 Elwis Compress Flex COB LED Hand Lamp Adjustable light through 180 Hanging Hook 3W COB LED 200 Lumen Magnetic base IP54 Dust Protection Includes 230v AC adaptor & 12v car charger Elwis Pen Light LED flash light with belt clip Handy Magnet Battery included Elwis Pen Light - Pack of 12 Distributor Pack of 12 pen lights LED flash light with belt clip Handy Magnet Battery included WORKSHOP TOOLS Elwis Compress COB LED Hand Lamp Latest LED technology: Chip On Board (COB) Extremely powerful wide beam light On/Off push button switch Belt clip Powerful magnet on back of lamp Durable, shatterproof rubberised ABS housing and polycarbonate lens 5 hours charging time Provides continuous light for 3.5 hours per charge Valve Spring Compressor - Multivalve Engines For the removal of valves on multivalve petrol & diesel engines Reinforced frame made from rust-proofed steel Supplied with 23mm & 28mm valve spring adaptors Elwis H120A Headlight Torch with Zoom Remote Battery Pack Aluminium and ABS plastic construction 3W Cree LED Adjustable beam up to 80 and lighting distance up to 150m Adjustable inclination up to 90 Optical lens maximises light output The LED will never need replacing 2 light settings: 100% and 50% Rugged adjustable headband Foam padding for added comfort Battery compartment located at rear of headlamp Batteries included OFFER SAVE LIST PRICE OFFER SAVE Dual Laser Infra-Red Thermometer High precision non-contact thermometer Dual Laser beams are targeted on a single spot ensures optimum distance from object for accurate temperature measurement Temperature range: -50 to 550 C Accuracy: +/- 1.5% at 550 C Features: LIST PRICE Backlit LCD display - MAX temperature display - Automatic data hold & display resolution - High & Low temp alarm setting Ideal for Aircon, Cylinder / Brake temp, Cooling System, Exhaust Cat etc OFFER SAVE 9.00 LIST PRICE PC. Hook, Pick & Scraper Set Hardened chrome vanadium steel Ergonomic soft grip handles Includes multi-purpose scraper, ideal for gasket scraping Set of 9 hooks, picks and scraper, ideal for the fitting and removal of: - O rings - Seals - Bushes - Springs - Cotter Pins - Fuses etc Supplied in moulded storage tray Contents: 4 x standard hooks & picks / 4 x mini hooks & picks / 1 x straight edge scraper

17 Hydraulic Ram - 8 tonnes force SP1500 Series 8 tonnes Hydraulic Ram Standard power unit for SP Hub Pullers and can also be used with many alternative SP puller applications e.g. 3 leg pullers, ball joint pullers, suspension bush removers etc OFFER SAVE LIST PRICE Slide Hammer Puller Kit - Combi Pull & Split Collets Extractor 3 straight legs, 3 cranked reversible legs for internal and external pulling 4 split collet internal extractors Adjustable cone ensures positive location, minimising risk of slippage Straight Leg - External Spread: mm - Internal Spread: 23-83mm - Maximum External Reach: 75mm Cranked Leg - External Spread: mm - Internal Spread: 23-70mm - Maximum External Reach: 65mm Split Collets - Internal Spread: mm OFFER Supplied in carton SAVE LIST PRICE Two Leg Mechanical Thin Jaw Gear Puller Thin jaws enable access where clearance behind components is limited Two legs for removing gears, races, bearings and sprockets Drop forged steel legs, beam and jaws Heat treated for strength and durability Min - Max Spread: 0-75mm Max Reach: 75mm Can be upgraded for triple leg pulling Supplied in carton Multipull Blind Housing Bearing Remover Remove blind housing bearings without the need to dismantle machinery or OFFER remove the running shaft SAVE Positive seating allows even tension on LIST PRICE inner and outer bearing rings, reducing resistance Stabilisers reduce sideways movement and self-centre the puller Min Spread: 20mm Adaptor Dia: mm OFFER SAVE LIST PRICE Max Spread: 117mm Puller Reach: 415mm Tel: PULLERS Hydraulic Puller & Separator Kit Makes 4 different twin/triple leg pullers, plus bearing separator kit Puller Min - Max Spread: mm Puller Max Reach: 150mm External Min - Max Spread: mm External Max Reach: 876mm Supplied in lockable metal case OFFER SAVE LIST PRICE Slide Hammer Assembly - 1kg For use with Sykes-Pickavant split collet type internal extractors Hammer displacement 220mm Hammer weight 1kg OFFER SAVE LIST PRICE Split Collet Internal Extractors The split collet is pushed into the centre of the bearing and then expanded via the hex nut on the end of the collet until a secure grip is achieved. The slide hammer is then attached providing the necessary extracting force. Specifications Part No. Internal List Save Offer Spread Price Price Price Min - Max mm mm mm mm mm mm mm mm mm mm /2 female to M8 male converter: n/a

18 Pneumatic Oil Extractor Remove and extract waste fluids or oil from an engine with flexible PV tube and robust probe Powered from compressed air 70L tank capacity Adjustable 10L oil capture pan Visible fill level indicator 1-2 L/Min Suction capacity depending on nozzle used Working pressure 8-10 Bar Emptying with compressed air 1-2 bar Includes selection of PV tubes to cater for different lengths and diameters of dipstick tubes WARNING: Do not use with corrosive or inflammable products Fuel Extractor / Retriever Retrieve fuel following a filling error, removal of tank sender unit, changing or checking the fuel gauge, rinsing the fuel tank during body work etc Operates from workshop compressed air (no risk of sparks) Mobile 45 litre tank (on wheels) Cleanly draws up or pushes out fuel due to a venturi system Includes 2 anti static ground cables, overflow line and 3 fuel probes Emptying via the tank filler neck or fuel lines Stainless steel WORKSHOP EQUIPMENT 10T, 15T & 25T MODELS ALSO AVAILABLE Ask for details A range of Hydraulic Workshop Presses equipped with a two-speed manual pump, overload safety valve, automatic arm back-run system and V blocks Welded, heavy duty steel frame Two speed pump Overload safety valve Automatic arm return Pressure gauge V blocks Winch for table (For models & ) Manufactured in the EU Piston over-travel limit stop Part No. Rating Height (mm) Width (mm) Depth (mm) Bed Depth (mm) Range (mm) Weight (kg) * 20T * 30T T *Recommended for use with Universal Press Support Block See below PRESS HOME YOUR ADVANTAGE! SPECIAL DEAL PRICE WHEN PURCHASING A WORKSHOP PRESS Universal Press Support Block Universal Support for use with a workshop press Easily press bearings on a wide variety of suspension arms Three point contact guarantees a perfect, safe support Part No. Rating List Price Save Offer Price SP 20T SP 30T & PRESS SUPPORT BLOCK Adjustable height anvil bolts Swivel element for added versatility Price 17 Retractable Hose Reels Spring driven retractable hose reel c/w wall mounting brackets Suitable for compressed air or cold water up to 20 bar working pressure UV stabilised polypropylene OFFER SAVE LIST PRICE m x 10mm Reel Includes 10 metre x 10mm heavy duty black rubber air / water hose to ISO EN 2398 standard 3/8 bspt male inlet and the hose terminates in a 3/8 bspt male Hoses also available in 12m x 6mm (1/4 fittings) and 12m x 8mm (3/8 fittings). Contact Customer Services for more information m x 10mm Reel Includes 20 metre x 10mm heavy duty black rubber air / water hose to ISO EN 2398 standard 3/8 bsp female inlet and the hose terminates in a 3/8 bspt male Hoses also available in 20m x 8mm (3/8 fittings) and 18m x 12mm (1/2 fittings). Contact Customer Services for more information OFFER SAVE LIST PRICE

19 LCPNT205 Lee Cooper Cargo Work Trousers - Black 2 combat thigh pockets Pocket flaps with velcro Zip fly Belt loops 65% polyester / 35% cotton twill Available in waist sizes: 32, 34, 36, 38, 40, 42 Available in leg lengths: Short (30 ) Regular (32 ) Long (34 ) LCKP Lee Cooper Knee Pads for Lee Cooper Cargo / Holster Trousers Suitable for use with LCPNT206, LCPNT208 and LCPNT216 trousers Material: EVA flexible LCJKT436 Lee Cooper Quilted Jacket - Black 100% nylon jacket with boxed quilt effect design 100% polyester light weight padding Zip fastening to both front & hand pockets Fully functional chest pocket with contrast zip Available sizes: M, L, XL, XXL LCPNT208 Lee Cooper Cargo Trousers - Black / Grey Two colour trouser combining comfort & functionality Extending velcro fastening tool belt loop Adjustable elasticated gripper waistband Triple stitched seams Top loader knee pad pockets High abrasion resistant contrast panelling to leg hem panels 2 x front pockets, 2 x bellow back pockets, 2 x pleated leg pockets, Pen pocket, Phone pocket 65% polyester / 35% cotton double warp double weft canvas fabric Available in waist sizes: 32, 34, 36, 38, 40, 42 Available in leg lengths: Short (30 ), Regular (32 ) Long (34 ) LCTS003 Lee Cooper Technical Polo Shirt - Black Sportswear design, fit & styling Contrasting red placket and grey side panels with pockets 100% polyester pique fabric Available in sizes: M, L, XL, XXL, XXXL Tel: WORK WEAR LCSCK603 Lee Cooper Heavy Duty Work Socks Pack of 5 pairs - one size fits all LC022 Lee Cooper Hi-Top Safety Boot Available in UK sizes: 7-12 Lightweight & Flexible with modern styling Low profile anti-slip rubber sole Steel Toe Cap to ISO20345 standard PU Fabric Upper with textured rubber toe cap cover SPWF66 / SPWF55 SP Safety Trainer / Boot - Moulded Sole Available in UK sizes: 7-12 Dual Density PU, Oil & Acid Resistant Steel Toe Cap to ISO20345 standard Black Suede / Grey Mesh Upper Steel Toe Cap & Mid-Sole SPWF55 SPWF66 18

20 Diesel Fuel System Bleeding Kit Many modern diesel fuel systems are very difficult to self-bleed once the low pressure feed circuit has been opened to the atmosphere. The circuit may have been opened by removing the fuel filter or by a damaged feed pipe. The pump unit contained in the kit enables the user to generate suction by continually squeezing and releasing the hand pump to draw the air and fuel through the low pressure system. Designed to allow the user to bleed / prime the low pressure feed side of the diesel fuel system Contains common sized low pressure pipe sets including: - Standard 8mm, 10mm and newer 9.65mm (3/8 inch) - Renault small & large - Ford Typical coverage includes Citroën, Fiat, Ford, Land Rover, Peugeot, Renault, Volvo & Vauxhall Supplied in tin Features Clear pipes for visability of air bubbles Colour coded pipes for easy identification High grade reinforced pipes (rated over 10 bar) Pump incorporates one way valve for ease of use - i.e. just one hand required Note: Pipes are sold as a paired set. Hand pump is sold with connecting pipes and 10mm convertor pipe Scan the QR code to watch a video of the Diesel Fuel System Bleeding Kit DIESEL BLEEDING Diesel Fuel System Bleeding Kit - Master Kit Master kit includes the Diesel Fuel System Bleeding Kit (as above) plus a low pressure fuel gauge (10bar), tee piece and ratchet pump Gauge and tee piece enables the same pipes to be used for both bleeding and fuel pressure - providing a cost saving solution The pipes and gauge can also be used on petrol engines where applicable Ratchet pump provides a greater flow for when faster bleeding is required - i.e on some Ford models Supplied in foam in plastic case Ratchet Pump Kit Connects to 3/8 drive air ratchet to replace the hand pump section in kit (above) to generate faster flow Easily engages with all 3/8 Dr. air ratchets Retaining bracket holds pump during use for one-hand operation Supplied in plastic case MV8550 Mityvac Silverline Elite Automotive Kit Ideal for a wide variety of workshop tasks requiring vacuum and / or pressure featuring a dual convertor to switch from vacuum to pressure Ideal for a wide variety of diagnostic tests which require a pressure source - e.g. EVAP sensors, Cooling system leak tests etc Ideal for a wide variety of workshop tasks requiring vacuum and / or pressure - e.g. Diagnostics, brake bleeding, fluid transfer, evacuation, sampling etc Contents: - Silverline Die-Cast Aluminium Vacuum & Pressure Pump to 4bar (60psi) pressure - Large 480ml Fluid Reservoir with quick connection to pump - Selection of 12 vacuum caps - Diagnostic / Brake Bleeding Adaptor kit - Tubing and Tube Connectors Scan the QR code to watch a video of the Mityvac Elite Automotive Kit OFFER SAVE LIST PRICE

21 OFFER SAVE LIST PRICE Manual Pressure Brake Bleeder Compact solution for easy one man operation Portable unit no power or air supply required Combination of Mityvac pressure bleeder & SP aluminium pressure bleed cap OE recommended pressure brake bleeding solution Controllable output via hand pump and pressure gauge SP Vacuum Brake Bleeder c/w FREE Auto Filler Removes the brake fluid from the master cylinder by sucking it out of the filler Faster fluid changes as not all the fluid needs to be bled via a bleed nipple No need to have a pressure tight seal on those difficult to get at master cylinder reservoirs Uses standard workshop compressed air supply ( psi) to generate vacuum When combined with the Automatic Brake Fluid Filler Unit ( included), turns brake and clutch system bleeding into a genuine one man operation Brake Bleeder Cap - Starter Set Starter cap bleeder set suitable for 343 range of Electric Brake Bleeders Precision engineered aluminium caps for the following applications: - New Ford Fiesta ( ) - Nissan / Asian (Bayonet Type Cap) ( ) - Euro Cap - Angled (Screw Type Cap) ( ) Full range of caps available - Contact Customer Services for details OFFER SAVE LIST PRICE OFFER SAVE 6.00 LIST PRICE FREE BRAKE FLUID AUTO FILLER WHEN YOU PURCHASE SP WORTH A stand-alone brake fluid container for automatic filling of brake fluid reservoirs Vehicle Fluid Change Syringe - 200cc Transparent design to easily view the fluid Suitable for fluid suction and supply in vehicle service Composite plastic resistant to brake fluid and antifreeze 200cc capacity with quick disconnect tube Automatic Brake Bleeder - 12v Now includes aluminium Euro cap - angled screw type Compatible with ABS systems 12v powering with reverse polarity warning Includes pump with automatic shut off valve Regulator from 0 to 3Bar 5L reservoir with visible level and min level indication Auto power OFF when min level reached 12V power cable with jack (L: 4m) Fluid cable for brake fluid with quick coupling system (Length: 4m) Includes fluid collection bottle & European screw-on reservoir cap Stainless steel body Professional pump and regulator fitted Industrial Pump Sprayer - 1 Litre Includes adjustable brass spray head nozzle and viton seals Industrial pump sprayer suitable for various chemicals e.g. detergents, solvents, brake cleaner and general cleaning agents* Polythene body with pressure relief valve Stainless steel piston rod Model specific caps also available - Ask for details *Important: Before use, please check the compatibility of the product you wish to spray Tel: BRAKE BLEEDING 20

22 COOLING V2 315 Series Cooling System Test Kit All components of the 315 range are fully compatible with older SP Cooling System Kits and can be used to upgrade previous generations of Cooling System Pressure Test Kits which are fitted with quick-release connectors. For older systems with a threaded connection, adaptor is available Contents: - Hand Pump with Pressure Gauge & Quick-Release fitting OFFER SAVE Hose Assembly c/w quick-release fitting LIST PRICE x Threaded Cooling System Cap Adaptors - 3 x Bayonet Fitting Cooling System Cap Adaptors / 1 x Cap Adaptor wrench UPDATED KIT V2 HGV Cooling System Pressure Test Kit Updated kit now includes additional caps covering DAF LF, Renault D Series, Caterpillar, Optare bus, MAN bus & Dart SLF Contents: - High capacity metal bodied hand pump with bar pressure gauge - Quick-Connect Hose Assembly - 10 x Reservoir and Radiator Pressure Caps Dual Gauge measures in p.s.i and bar Additional Pressure Caps available - refer to applications guide Applications include: DAF / Iveco / MAN / Mercedes / Renault / Scania / Volvo Comprehensive applications listing provided with each kit Cooling Cap Set - To update Kit Set of 5 additional cap adaptors to update ( 315 Series Cooling System Test Kit) to present coverage BMW: 3i, Chevrolet: Orlando, Sonic, Spark, Trailblazer, Trax, Volt, Mercedes: A Class (168/169), B Class (245), Sprinter 06-, Vaneo (414), Mini: R55, R56, R57, R58, R59, R60, One, Clubman, Cooper, Countryman, Roadster, Saab: 9-5, Vauxhall: Adam, Ampera, Astra J, Astra GTC, Insignia, Meriva B, Mokka and Zafira C Tourer OFFER SAVE LIST PRICE Cooling Cap Set - To update V2 Kit Set of 2 additional cap adaptors to update V2 ( 315 Series Cooling System Test Kit - above) to present coverage BMW: 3i, Chevrolet: Orlando, Sonic, Spark, Trailblazer, Trax, Volt, Mini: R55, R56, R57, R58, R59, R60, One, Clubman, Cooper, Countryman, Roadster, Saab: 9-5, Vauxhall: Adam, Ampera, Astra J, Astra GTC, Insignia, Meriva B, Mokka and Zafira C Tourer OFFER SAVE LIST PRICE Universal Hose Clamp Clamping Range: 8-70mm 1/4 drive and thumb screw for adjustment OFFER SAVE 6.45 LIST PRICE Automotive Refractometer Tests Coolant, Battery Acid, Screenwash & AdBlue using an optical prism test technique Includes internal Light feature for ease of use in poor light Coolant Tests both propylene and ethylene based anti freeze coolant solutions and determines the freezing point Battery Acid indicates the specific gravity of the battery electrolyte Screen Wash shows the freezing point of screenwash fluids in degrees C AdBlue Indicates % concentration of AdBlue additive OFFER SAVE LIST PRICE

23 High Quality Air Tools that set the standard for Torque! Smart design impact wrench with ergonomically designed handle Single-switch can be changed for easy forward or reverse operation Easily adjustable torque regulator Can be configured for right and left handed use Composite body Scan the QR code see our range of Air Tools Tel: Impact Wrench Specifications: Part No. Drive Max Torque Nm Torque Nm Noise Air Consumption Weight (Reverse) (Fwd) (dba) (l / min) (kg) Price / (Mini) 1/ / / / Signal Hose - 10mm (3/8 ) Length: 10 metres High-visibilty hose to reduce trip hazard Abrasion resistant outer cover Working temp range -40 c to +65 c Working pressure: 300psi Break pressure: 1000psi Rubber Boot - For For use with /2 Impact Wrench (above) Protects gun from accidental damage *Impact wrench not included N.B. Hose supplied without fittings AIR TOOLS! Bionigrip Air Die Grinders Provides perfect handling due to the Bionigrip surface Low noise level and minimal vibration provides less kick back from cutters Includes stepless trigger and air exhaust to the rear Precision collet: 6.0mm instead of the usual 1/4 clamps carbide cutters over the entire length Specification Weight Length Precision Collet Maximum RPM Air Inlet Hose min. Air Consumption kg 175mm 6mm 23,000 1/4 NPT 10mm 116 l/min kg 177mm 6.35mm 23,000 1/4 NPT 10mm 116 l/min Bionigrip Heavy Duty Bionigrip Heavy Duty Straight Air Die Grinder 90 Air Die Grinder Universal Air Swivel Joint Inlet 2 x 360 rotation Industrial quality Heat treated connecting screw Micro Die Grinder The latest generation mini composite device for small / fine grinding and milling Provides perfect handling due to the Bionigrip surface Minimal vibration and low noise Exhaust air through hose to the rear Length: 137mm

24 GLOW PLUG & DIESEL INJECTOR SERVICE V2 Vibro Impact Glow Plug Remover Kit For the safe, effective removal of 8, 9, 10, 11 & 12mm glow plugs Uses controlled impact torque to create vibration in order to loosen seized glow plugs The Vibro-Impact tool loosens the seized glow plug, making it safe and easy to remove without the risk of broken plugs, and / or damaged cylinder heads Includes 4 low-torque settings for controlled vibration (10, 20, 30, 40Nm) Supplied with special long-reach 8, 9, 10, 11 & 12mm glow plug sockets, long and short extensions and universal joint for ease of access OFFER SAVE LIST PRICE Square Drive ¼ Max Torque - Right 40Nm Max Torque - Left 10 / 20 / 30 / 40Nm Air Inlet ¼ Air Consumption 250 ltrs / min Speed 12,000 per min Air Supply 6.3bar / 90psi V2 Glow Plug Removal Kit Updated kit now includes additional parts - 6 x extractor sockets - 1 x dual size high tensile step drill - 1 x narrow pulling unit set - 1 x drill holder extension - 2 x taps - 2 x drill bits - 2 x glow plug chamber cleaning brushes For removing damaged and broken glow plugs from cylinder heads Ideal for use where a glow plug has sheared off just below the hex, or flush with the cylinder head Removes 8mm & 10mm glow plugs (M8 x 1.0 thread or M10 x 1.0 thread) UPDATED KIT OFFER SAVE LIST PRICE Comprehensive kit includes all necessary adaptors, centering and thread cleaning tools to safely remove the damaged glow plug without damaging the cylinder head Supplied in case with foam Glow Plug & Spark Plug Thread Recovery Set For the repair of plug threads within the cylinder head Repairs thread from the bottom, to minimise the risk of debris entering the engine Made from hardened and tempered steel Contents: (all sizes have hex drive) M8 x mm length M10 x mm length M12 x mm length M12 x mm length M14 x mm length M14 x mm length M18 x mm length OFFER SAVE LIST PRICE Electronic Diesel Injector Removal Socket Set Hexagonal socket set for removal of the electrical solenoid from modern diesel injectors 1/2 sq dr. / 22mm hex 100mm length In most cases, it is necessary to remove the solenoid before attempting to remove the injector body Includes 4 x sockets: 25, 27, 29 & 30mm Hex OFFER SAVE LIST PRICE Sykes-Pickavant Ltd, Unit 4 Cannel Road, Burntwood Business Park, Burntwood, Staffordshire, WS7 3FU. United Kingdom Tel: +44 (0) Fax: +44 (0) sales@sykes-pickavant.com ALL PRICES QUOTED EXCLUDE VAT & ARE SUBJECT TO AVAILABILITY - E&OE - PRICES VALID UNTIL 31ST DECEMBER REF: SPQ414EURO COPYRIGHT SYKES-PICKAVANT LTD. ALL RIGHTS RESERVED. Distributor Stamp: