Electrical Tools. Crdi Diesel Return Flow Measuring Kit Six Cylinder Master Kit With All Adaptors

Size: px

Start display at page:

Download "Electrical Tools. Crdi Diesel Return Flow Measuring Kit Six Cylinder Master Kit With All Adaptors"

Ross Sims
5 years ago
Views:

Fuel Consumption Meter Product Code : ITCI1078 Stationery or mobile use (12 V DC, 24 V DC or 230 VAC) Suitable for use with the following types of fuel:unleaded petrol (DIN EN 229), super-unleaded

touch-screen operation Language selection German / English Robust metal housing with carrying handles Diesel Return Flow Volume Tester For Common-rail Injection Systems Product Code : ITCI1079

1 Fuel Consumption Meter Product Code : ITCI1078 Stationery or mobile use (12 V DC, 24 V DC or 230 VAC) Suitable for use with the following types of fuel:unleaded petrol (DIN EN 229), super-unleaded petrol(din EN 228) Diesel (DIN EN 590).touch-screen operation Language selection German / English Robust metal housing with carrying handles Diesel Return Flow Volume Tester For Common-rail Injection Systems Product Code : ITCI1079 Measures the overflow ( spill or return) and allows a visual volume comparison of the return-flow of all injectors at the same time Gives an idea of the condition of each injector (used, blocked or leaking) and helps to find the cause of starting problems or rough running engine Fuel resistant measuring container for 6 or 8 injectors, can be suspended underneath the hoodr The adapters, marked with the name of the injector manufacturer can be changed over at the connecting hose pipe 4 set of 6 adapters for Bosch, Delphi, Denso and Siemens injectors Flexible fuel-resistant hoses, 1,2 m length Crdi Diesel Return Flow Measuring Kit Six Cylinder Master Kit With All Adaptors 40 For Separate Injectors Refer Below Injectors Part No. Bosch Delphi Denso Siemens ITCI1080 ITCI1081 ITCI1082 ITCI1083 Designed for use on the return side of injector NEVER connect to high pressure side Identifies faulty injectors quickly for return flow (leak back) from injector in cylinder vehicles compact, graduated fuel chambers with connecting hoses for easy comparison of fuel leak back volume Injector system specific adaptors can be provided- Bosch/Denso/Delphi/Seimens

Glow Plug Tester Product Code : ITCI1084 CRDI Engines Product Code : ITCI1085 Diesel Engines Enables fast diagnosis of glow plug failure or

directly to the vehicle's battery for 4.

through 9V monobloc battery Digital Belt Tension Gauge Product Code ITCI1086 Tester with digital display for checking the tension of toothed

digit display Range 0 to 500 Newtons Resolution 10 N Low battery indication Automatic cutout Power supply by 9 V monobloc battery Cable length 1.

the belt for proper tension Suitable for all common types of engine belt Including timing, ribbed, tooth and V-belt.

2 Glow Plug Tester Product Code : ITCI1084 CRDI Engines Product Code : ITCI1085 Diesel Engines Enables fast diagnosis of glow plug failure or degradation without the need to disassemble the plug from the engine Unique 5V system Suitable for use on any 12V DC vehicle system and connects directly to the vehicle's battery for 4.4V and 5V glow plugs LED indicator light for condition of glow plugs (good/poor) Low battery indicator light Automatic cut-outpower supply through 9V monobloc battery Digital Belt Tension Gauge Product Code ITCI1086 Tester with digital display for checking the tension of toothed belts Clamping the belt in a metal sensor brings up the tension in Newtons This measurement has to be compared with the manufacturer s data 3 ½ digit display Range 0 to 500 Newtons Resolution 10 N Low battery indication Automatic cutout Power supply by 9 V monobloc battery Cable length 1.00 m (3 ft) Engine Belt Tension Gauge Product Code ITCI1126 This tool can be used to confirm tension on the engine belt of cars Simple to check the belt for proper tension Suitable for all common types of engine belt Including timing, ribbed, tooth and V-belt. Transmission And Engine Oil Pressure Tester Product Code ITCI1093 Quickly diagnose faults in oil pump, engine oil pressure switches with warning indicators Quick release coupling adapters with shut-off valve for speed and security Permanently oil primed Large easy to read dual scale gauge psi 41

5P 4 pcs Injection nozzle socket 100L-25-27-29-30mm 6PT Feature: For removing stuck and the seized common-rail Injectors without dismount the cylinder head for all injection nozzle cars Injector

3 14pcs Injector Extractor With Slide Hammer Common Rail Puller Product Code ITCI1088 Contents : Slide hammer: 3.9KGS Adaptor: M14 x 1.5 for DELPHI Adaptor: M17 x 1 for Bosch Adaptor: M20 x 1 for DENSO Adaptor: M24 x 1 for SIEMENS Adaptor: M27 x 1 for SIEMENS Adaptor: M27 x 1.0 for Bosch injector nozzle Adaptor: Puller W/M14x 1.5P 4 pcs Injection nozzle socket 100L mm 6PT Feature: For removing stuck and the seized common-rail Injectors without dismount the cylinder head for all injection nozzle cars Injector Extractor Product Code ITCI1089 For removing seized or stuck common rail injectors without having to disassemble the cylinder head Applicable for MERCEDES-BENZ CDI engines 611, 612,613, etc Especially suited to the limited spaces Injector Remover for Bosch/Delphi Product Code ITCI1054 For removal of stubborn Bosch/Delphi diesel injectors Two adaptors for deferent removal methods. The first, screws onto the injector cap and the second internally inside the injector allowing extra force to be used. The flexible joint allowing the slide hammer to be used in restricted areas. Includes Carry case, 1.8kg Slide Hammer, Flexible Joint, 2Adaptors, Security Hex Key 10mm, Injector Cap Socket Adaptor Thread Sizes: Ø17mm Male X 1mm Pitch Ø27mm Female X1mm Pitch 42

Vacuum And Pressure Pump Product Code ITCI1094 Vacuum pump, aluminum version, for the testing of

mm (2 1/2"), range -1 to 0 bar graduated in 0.

achieved by means of the set screw One hand operated vacuum meter with 0.

adaptor kit for ITCDCT-KIT contains the 9 most popular Glow plug adaptors and is compatible with

/ Ford / Isuzu / Land Rover / Leyland Daf / Mazda / MB / Mitsubushi / Nissan / Opel / Peugeot /

Product Code ITCI1087 Digital pressure tester with plug-in adaptors for the pressure and leak

by means of the adaptors supplied (application list enclosed) The existing system pressure is

4 Vacuum And Pressure Pump Product Code ITCI1094 Vacuum pump, aluminum version, for the testing of all vacuum areas in vehicles High quality vacuum meter with robust protective rubber cap DS 63 mm (2 1/2"), range -1 to 0 bar graduated in 0.05 bar steps and -760 to 0 Plastic hose and bilateral conical brass adapter Vacuum decreasing is achieved by means of the set screw One hand operated vacuum meter with 0.05 graduation with vacuum regulator Glow Plug Adaptor Kit 9pc Product Code ITCI1095 Glow plug adaptor kit for ITCDCT-KIT contains the 9 most popular Glow plug adaptors and is compatible with ITCDCTKIT Glowplug adaptors fit a wide range of vehicles: Audi / BMW / Citroen / Diahatsu / Fiat / Ford / Isuzu / Land Rover / Leyland Daf / Mazda / MB / Mitsubushi / Nissan / Opel / Peugeot / Renault / Rover / Seat / Toyota / Vauxhall / Volkswagan / Volvo Common Rail Pressure Tester Product Code ITCI1087 Digital pressure tester with plug-in adaptors for the pressure and leak testing of common rail systems The tester is connected direct to the high pressure rail sensor by means of the adaptors supplied (application list enclosed) The existing system pressure is shown on the display and can then be compared with the manufacturer s data Measuring range from bar Fault detection indicated by a red warning LED Automatic cut-off after 7 minutes 43

Full spare parts available Supplied in foam inserted carrying case Fuel Injector Tester 0 400 bar Product Code ITCI1091 0 600 bar Product Code ITCI1092 Tester for testing petrol and diesel fuel

P), spray pattern and leaks Special design in aluminum with baseplate; precision pressure gauge made of V steel DS 100, with protective rubber cap; container (330 cm3) with Plexiglas splash guard

5 Diesel Engine Compression Test Kit Product Code ITCI1090 Multi-brand diesel engine compression test kit Provides a great start by covering a range of popular car and van applications Suitable for both direct and indirect diesel injected cars Includes 0 70 bar ( psi) pressure gauge with quick connector, glowplug and injector 5 piece spacer set, 2 clamp plates, 3 injector adaptors Full spare parts available Supplied in foam inserted carrying case Fuel Injector Tester bar Product Code ITCI bar Product Code ITCI1092 Tester for testing petrol and diesel fuel injectors for nozzle opening pressure (N.O.P), spray pattern and leaks Special design in aluminum with baseplate; precision pressure gauge made of V steel DS 100, with protective rubber cap; container (330 cm3) with Plexiglas splash guard The advantage of these testers is that the pump lever can be transferred to the front socket to facilitate pumping (volume per stroke 35 ccm). Note : All makes of common rail injector can be tested for leaks (drips, loss of pressure, etc.) with the tester type Fuel Injector Tester Economy model Product Code ITCI1091E Economy model injector tester 44

Glow Plug Adaptor Kit For Common Rail Diesel System Product Code ITCI1097 24 piece glow plug & injector adaptor set With quick connector for ease of use Injector adaptors included : M20, M22, M24 &

Glowplug adaptors fit a wide range of vehicles: Alfa, BMW, Chrysler, Daewoo, Fiat, Ford, Hyundai, Izusu, Land Rover, LDV, Mazda, Mercedes, Mitsubishi, Nissan, Opel, PSA, Renault, Saab, Suzuki,

vehicles Allows fuel pressure analysis through checking the fuel pump, fuel pressure regulator and injection rail 2 high precision fuel pressure gauge, double scale 0-10 Bar (0-120 p.s.i) and 0-2 Bar (0-40 p.

6 Glow Plug Adaptor Kit For Common Rail Diesel System Product Code ITCI piece glow plug & injector adaptor set With quick connector for ease of use Injector adaptors included : M20, M22, M24 & Ford Stanadyne injectors Designed for compression testing through glow plug opening which eliminates having to remove the injectors. These are a must if testing on HDI engines! Glowplug adaptors fit a wide range of vehicles: Alfa, BMW, Chrysler, Daewoo, Fiat, Ford, Hyundai, Izusu, Land Rover, LDV, Mazda, Mercedes, Mitsubishi, Nissan, Opel, PSA, Renault, Saab, Suzuki, Toyota, VAG, Vauxhall, Volvo diesel engines Fuel Injection Pressure Testing Kit Product Code ITCI1098 Suitable for the most common electronic fuel injection systems on European, Asian and American vehicles Allows fuel pressure analysis through checking the fuel pump, fuel pressure regulator and injection rail 2 high precision fuel pressure gauge, double scale 0-10 Bar (0-120 p.s.i) and 0-2 Bar (0-40 p.s.i) Kit comprises a very extensive set of brass and metal adapters with quick connector to allow testing on typical TBI (Throttle Body Injection) systems, Bosch, CIS (Continuous Injection Systems) MPFI (Multi-Port Fuel Injection Systems) TBI (Throttle Body Injection) systems Turbo Pressure/ Vacuum Tester Product Code ITCI1099 Tests pressure and/or vacuum of the engine's turbo loader High quality compound gauge with robust protective, dia 100mm to measure vacuum / pressure Range -1 to +3 bar, 45

Boroscope Product Code ITCI1119 Camera system & optional insert tube: Diameter : 5.5mm (8.5mm / 4.5mm / 3.

34 Diagonal field angle 56 Depth of field (DOF): 1cm~6cm Water resistant: only the insert tube is water resistant Working temperature :0 c~55 c Tip accessary:90, 70, 110 mirror, magnet, System

4" Working temperature: 0 c~60 c Storage temperature: -20 c~60 c Cylinder Leakage Tester For Petrol & Diesel Engines.

8 Boroscope Product Code ITCI1119 Camera system & optional insert tube: Diameter : 5.5mm (8.5mm / 4.5mm / 3.9mm / Baitoo-C) Camera resolution : 325 (H) 250 (V) Housing : steel Light source : whist LED Length: 1m (2m, 3m, 5m, 10m, 20m, 30m) Field of view (FOV): horizontal field angle 46 Vertical field angle 34 Diagonal field angle 56 Depth of field (DOF): 1cm~6cm Water resistant: only the insert tube is water resistant Working temperature :0 c~55 c Tip accessary:90, 70, 110 mirror, magnet, System dimension: mm Power supply: 4 Alkallne AA 1.5-volt batteries Estimated battery life: 8hrs* Display resolution : Language : English Screen type:2.4" Working temperature: 0 c~60 c Storage temperature: -20 c~60 c Cylinder Leakage Tester For Petrol & Diesel Engines. Product CodeITCI11100 Engine pressure-loss tester in metal housing for petrol and Diesel engines Supplied with additional control knob to increase air pressure, facilitating the audible locating of leakage point Before the test is carried out, the engine is adjusted by workshop pressure to a permissible pressure loss (approx. 23 %). If the test instrument needle falls beyond 23%, the pressure loss is unacceptable Possible areas of leakage: Inlet valves, pistons and piston rings Exhaust valves and cylinder head gasket Piston Ring Plier Product Code ITCI1125 Expands ring: 1.2mm - 6.3mm with adjustable stop 47

Timing Light For 24v Diesel Engine Product Code ITCI1111 Works on all 24 volt diesel engines.

light Advance knob with scale reading in direct degrees Ferret Timing Light Product Code ITCI1111F Reinforced, High temperature, solvent

Back panel LED display shows RPM Piston Ring Tool Product Code ITCI1113 Used to prevent piston ring damage while installing the cylinder head

9 Timing Light For 24v Diesel Engine Product Code ITCI1111 Works on all 24 volt diesel engines. High impact abs housing detachable heavy duty inductive pick-up clamps, leads and diesel sensor Bright xenon flash tube provides concentrated light Advance knob with scale reading in direct degrees Ferret Timing Light Product Code ITCI1111F Reinforced, High temperature, solvent resistant Plastic. Discriminates between spark pulses and noise for for confident output readings. Back panel LED display shows RPM Piston Ring Tool Product Code ITCI1113 Used to prevent piston ring damage while installing the cylinder head Easily removed when cylinder is in place Tool supplied with four rings ranging from Ø40-85mm Will fit most engine sizes: 40mm, 80mm, 110mm Small Ring Clamp: Ø40-50mm Large Ring Clamp: Ø60-75mm Extra Large Ring Clamp: Ø75-85mm Medium Ring Clamp: Ø50-70mm 48

Pressure Tester For Automatic Gear Box Product Code ITCI1114 Tests

provided 2m and 5m high pressure lines enable test from drivers s

gauges ensure precise result Including 7 pairs of brass adapters

Leaks in heat exchanges can cause coolant to mix with gearbox oil,

tester provides evidence of coolant in the gearbox oil, down to as

10 Pressure Tester For Automatic Gear Box Product Code ITCI1114 Tests hydraulic brake systems if enough pressure on the brake pad is provided 2m and 5m high pressure lines enable test from drivers s seat Testing from driver s seat while driving Calibrated pressure gauges ensure precise result Including 7 pairs of brass adapters for most common vehicles Gear Box Oil Tester Product Code ITCI1115 Leaks in heat exchanges can cause coolant to mix with gearbox oil, leading the gear box being damaged The centrifugal device in the tester provides evidence of coolant in the gearbox oil, down to as little as 0.01% Bore Gauge Product Code ITCI1143 Sizes : 18-35mm, 35-60mm, mm 49

Electronic Stethoscope 6 Channel Product Code ITCI1118 Suitable for detection of faults in Engine, Transmission Cat Intake/Exhaust

Listen for trouble by tracing sound of flowing water, oil, gas or steam.

Disassembles for storage. 40sets / 11 / 12 / 2.

switches, and oxygen sensors on most car models CR-MO alloy steel for long life Heavy duty blow mold case Injector Extractor For

11 Electronic Stethoscope 6 Channel Product Code ITCI1118 Suitable for detection of faults in Engine, Transmission Cat Intake/Exhaust Manifold Fuel injectors, Body vibration etc Mechanic's Sethoscope Product Code ITCI1116 Locates source of engine noise quickly. Listen for trouble by tracing sound of flowing water, oil, gas or steam. Identify piston slap, worn gears, faulty valves, water pump failure, Damaged gaskets and defective bearings handle is shockproof Disassembles for storage. 40sets / 11 / 12 / Piece Oxygen Sensor Socket Set Product Code: ITCI1150 Easily removes vacuum switches, oil pressure sending unit brake light switches, and oxygen sensors on most car models CR-MO alloy steel for long life Heavy duty blow mold case Injector Extractor For Mercedez Benz CDI Engines Product Code ITCI1138 For removing seized or stuck Common Rail injectors without having to disassemble the cylinder head Applicable for MERCEDES-BENZ CDI engines 611, 612, 613, etc Especially suited to the limited spaces due to the cylinder head cover C 50

Universal Clutch Alignment Tool Product Code ITCI1127 Nylon components with steel main shaft Allows the clutch plate and the pressure plate to be

sized expanding collets Image Guide Scope Product Code ITCI1128 Inspects hard-to-reach corners flexible cables for easy operations Equipped with

Code ITCI1129 Complete set of metric hex wrenches in one tool 1.5 / 1,5mm 2 mm 2.5 /2,5mm 3 mm 3.5 / 3,5 mm 4 mm 5 mm 5.

Guage 1/2" Sq drive Product Code ITCI1130 Designed to be used with any 1/2"Sq drive torque wrench Tough composite dial and rotating index line

12 Universal Clutch Alignment Tool Product Code ITCI1127 Nylon components with steel main shaft Allows the clutch plate and the pressure plate to be assembled on the bench Fits 90% of cars and light vans up to 5tonne gross Suitable for front wheel drive vehicles Supplied with two different sized expanding collets Image Guide Scope Product Code ITCI1128 Inspects hard-to-reach corners flexible cables for easy operations Equipped with illumination lamp for clear viewing Extremely wide applications including automotive, machinery, aircraft Ratcheting Alien(Hex) Key set Product Code ITCI1129 Complete set of metric hex wrenches in one tool 1.5 / 1,5mm 2 mm 2.5 /2,5mm 3 mm 3.5 / 3,5 mm 4 mm 5 mm 5.5 / 5,5 mm 6 mm Totally 8 Keys Warning; This tool is not intnded for final seating of fastners excessive torque may cause breakage Angular Torque Guage 1/2" Sq drive Product Code ITCI1130 Designed to be used with any 1/2"Sq drive torque wrench Tough composite dial and rotating index line allow operator to accurately tighten fixing to manufacturer s exact specification Supplied with fully adjustable reaction arm Essential measuring tool for the busy workshop 51

Fuel Injection Pressure Test Kit (Eco) Product Code ITCI1133 Comprehensive kit of hoses, adaptors and fittings for testing the pressure on modern petrol fuel injection systems.

Gauge features a hanging hook and suction cup Pressure release valve fitted with long drain hose allows safe recovery of fuel Supplied in carry-case Exhaust Cutter Product Code ITCI2031 14 alloy

ITCI1139 Accurate and fast diagnosis Leak detector for cylinder head gasket with 2 test chambers for Diesel and petrol engines With quick coupling for the connection with our singular adapters K and

13 Fuel Injection Pressure Test Kit (Eco) Product Code ITCI1133 Comprehensive kit of hoses, adaptors and fittings for testing the pressure on modern petrol fuel injection systems. Fitted with quick couplings and safety valve to prevent inadvertent discharge of fuel under pressure Supplied with Ø92mm single high pressure gauge with rubber bumper, reading 0-120psi and 0-8bar Gauge features a hanging hook and suction cup Pressure release valve fitted with long drain hose allows safe recovery of fuel Supplied in carry-case Exhaust Cutter Product Code ITCI alloy cutting wheels 12 inch log chair Will cut from 3/4 to 31/2 dia Replace able chair available Strong Plastic Grip Cylinder Leakage Tester For Petrol And Diesel Engines (Co2 LeakTester) Product Code ITCI1139 Accurate and fast diagnosis Leak detector for cylinder head gasket with 2 test chambers for Diesel and petrol engines With quick coupling for the connection with our singular adapters K and KS as well as universal adaptors A leak at the cylinder head gasket or the cylinder head is indicated by a change in color of the reaction liquid from blue to yellow (petrol engines), to green (Diesel engines) for Diesel und petrol engines with quick coupling Delivery includes: Co2 Leak detector LT

Compression Tester For Diesel Engines / Maraine & Industrial Engines Product Code ITCI1142 High quality gauge with solid protective rubber cap DS 80mm (3 1/4") flexible hose with

5 Has Additional pressure release valve between hose and gauge allows a repetition of the test One compression tester KP 80/3 A, test hose with standard connection and 1 adapter Engine

Existing Tata Motors recommended adaptors can be used.

14 Compression Tester For Diesel Engines / Maraine & Industrial Engines Product Code ITCI1142 High quality gauge with solid protective rubber cap DS 80mm (3 1/4") flexible hose with integrated pressure check valve including spark plug connecting part with external thread M 14X1.25 and M 18X1.5 Has Additional pressure release valve between hose and gauge allows a repetition of the test One compression tester KP 80/3 A, test hose with standard connection and 1 adapter Engine Compression Mesurement Kit - TATA Product Code ITCK1010 Compression Tester for Tata Motors Diesel and Petrol engines Single Gauge for Diesel and Petrol Engines. Existing Tata Motors recommended adaptors can be used. Adptors for all Quadrajet and Petrol engines including Nano Attractive Carry Case For more details Tata Motors Service Information Circular No : SI61413DZ *Approved by Tata Motors for Tata Dealers Compression Tester For Petrol And Diesel Engines(Economy) Product Code ITCI1144 High quality gauge with solid protective rubber cap DS 80mm (3 1/4") flexible hose Additional pressure release valve between hose and gauge 53

Engine Pressure Loss Tester For Ford Vehicles Product Code ITCI1145 Engine Pressure Loss tester with connection to workshop pressure Indicates the cylinders pression-loss in percent

from a compressor and measures the rate at which it leaks through the engine Quick diagnose of failed or leaking valves, pistons, rings, and head gaskets Source of leakage can be

5 16 Pin OBD Breakout Box Product Code HIC002 An extension of OBD Diagnostic Link Connector (DLC) For short circuiting of pins To detect isolated circuits problems Is a power

15 Engine Pressure Loss Tester For Ford Vehicles Product Code ITCI1145 Engine Pressure Loss tester with connection to workshop pressure Indicates the cylinders pression-loss in percent Precision gauge DS 80mm (3 1/4") with green area Robust protective rubber cap Engine Pressure Lost Tester With Inlet Pressure Gauge Product Code ITCI1146 A leak down tester uses air from a compressor and measures the rate at which it leaks through the engine Quick diagnose of failed or leaking valves, pistons, rings, and head gaskets Source of leakage can be found by listening for the escaped air additional gauge to check Adapters M14x1.25 and M18x Pin OBD Breakout Box Product Code HIC002 An extension of OBD Diagnostic Link Connector (DLC) For short circuiting of pins To detect isolated circuits problems Is a power extension cord for small DC testers that need an external power source (maximum 1.2 amps.) To monitor data stream while performing test on vehicle using a Scantool To test circuits with a meter or scope To perform special functions and tests such as Ohm-out, Bench programming 54

Auto Snap Vehicle Scan Tool Product Code ITCI1152 View freeze frame data & display live PCM datastream Full test function: Read Codes, Erase Codes, Data Stream, Special Test, Components Test, ECU

160x160 pixel Operating Temperature: 0 C to 60 C (32 to 140F ) Power: 10 to 15 volts provided via vehicle battery Dimensions: 192 mm*93 mm*29 mm (L*W*H) Unit Packing Size:191mmx 93mm x 29mm (L*W*H)

7 kg Large Packing Box Size: 450mmx370mmx410mm(L*W*H) Large Packing Box 20 pcs Autel Maxi Scan Can Obd2 Code Reader Product Code : ITCIMS309/409 Work with all 1996 and later OBD II compliant US,

16 Auto Snap Vehicle Scan Tool Product Code ITCI1152 View freeze frame data & display live PCM datastream Full test function: Read Codes, Erase Codes, Data Stream, Special Test, Components Test, ECU Info. Display readiness status, Graphs data Retrieve vehicle information (VIN) DTC lookup Easy to understand and to operate Upgradeable via the software/hardware interface included Display: Backlit, 160x160 pixel Operating Temperature: 0 C to 60 C (32 to 140F ) Power: 10 to 15 volts provided via vehicle battery Dimensions: 192 mm*93 mm*29 mm (L*W*H) Unit Packing Size:191mmx 93mm x 29mm (L*W*H) Unit Packing Weight:0.7 kg Large Packing Box Size: 450mmx370mmx410mm(L*W*H) Large Packing Box 20 pcs Autel Maxi Scan Can Obd2 Code Reader Product Code : ITCIMS309/409 Work with all 1996 and later OBD II compliant US, European and Asian vehicles Easily determine the cause of the Check Engine Light ( MIL) Retrieve generic (P0, P2, P3, and U0), manufacturer specific (P1, P3, and U1) codes, and pending codes Turn off Check Engine Light (MIL), clear codes and reset monitors, Display DTC definitions on unit screen View freeze frame data Display monitor and I/M readiness status (emissions), Multilingual menu and DTC definitions - English Retrieve vehicle information (VIN, CIN and CVN), Support CAN (Controller Area Network) and all other current OBD II protocols 409 Additional Features Memory/Battery Backup for off vehicle data review and analysis Built in Obd II DTC Look up Library Software up gradable via Internet Autel Maxi Scan Can Obd2 Code Reader Product Code : ITCIMS509 All feature of ITCMS309 with the following additional features Reads live PCM datastream Displays live 02 sensor test data Graphs data -(1996 and newer) Reads,stores & playsbacks live sensor data Performs modules present test Prints data via PC 55

New Product Guide. See the new Sykes-Pickavant catalogue for further details! Service & Diagnostics. Engine CAT054

New Product Guide. See the new Sykes-Pickavant catalogue for further details! Service & Diagnostics. Engine CAT054 Product Catalogue See the new Sykes-Pickavant catalogue for further details! CAT054 New Product Guide Engine 314050 Petrol Compression Tester Set - for Deep Seated Plug Ports Page 11 314270 Page 13 314295