Champ NVMV Series Ex-Protected Luminaire for IEC and ATEX Applications

Transcription

1 Champ NVMV Series Ex-Protected Luminaire for IEC and ATEX Applications

2 Header Text Champ NVMV Series - Ex-Protected Luminaires for IEC and ATEX Applications Cost-effective, energy-efficient luminaires suitable for global applications and specifications Cooper Crouse-Hinds lighting products build upon over 1 years of harsh and hazardous expertise Our global product offering provides energy-efficient solutions that reduce total cost of ownership for our customers through superior photometry, optical light sources and luminaire placement Our breadth of product, along with outstanding services and know-how, allow us to partner with customers in any application, providing lighting solutions that enhance productivity without ever sacrificing safety KEY PRODUCT DIFFERENTIATORS One product offering for global applications The Champ family has the required IEC and ATEX certifications to provide solutions for specification requirements around the world Restricted breathing (Ex nr) protection is standard This provides better T-ratings, as gases will not enter the lamp chamber and control gear housing Identical mounting cover for IEC and NEC applications - regardless of wattage, options and accessories Reduce inventory costs and provide greater flexibility for engineering designers, customers and distributors HPS lamps restrike in 1-3 seconds with the instant restrike option (IR) should lamp extinguish due to system voltage drop or momentary loss Optional built-in cut-off feature will shut off the instant restrike to avoid continuous high energy pulsing when lamp is inoperative or nearing end of life (pending) Available with the Champ Quick-Clip Quick-Clip secures the housing to the cover, providing faster, easier, and safer luminaire installation 2

3 PRODUCT FAMILY OVERVIEW The Champ NVMV design is optimized for Zone 2 gas applications (with standard restricted breathing Ex nr protection), as well as Zone 21 dust applications Champ NVMV Series provides an integrated ballast with thermal cut-off functionality incorporated into the control gear In the event of abnormal temperatures or when the lamp approaches end of life, the cutoff functionality protects the ballast from overheating or burning out NVMV CERTIFICATIONS NVMV 7W - 25W (Small Housing) NVMV 25W - 4W (Large Housing) Application in Zone 2 area acc IEC Marking to 94/9/EC: II 3 G Ex nr II T*Gc EC Type examination: LCIE 9 ATEX 12 Application in Zone 21 and 22 areas acc IEC Marking to 94/9/EC: II 2 D Ex t IIIC TºC(*) Db IP66 EC Type examination: LCIE 9 ATEX 38 APPLICATIONS General per both application Zone 2 and 21 Temperature ambient of use: -45ºC to +55ºC Electromagnetic compatibility: EN Degree of protection: acc EN 529 IP66 IEC and ATEX certifications allow you to specify the NVMV for key geographical markets to serve key industries: Latin America Refining, land-based drilling, chemical Pacific Rim Middle East North America Asia Australia Africa Europe Offshore drilling, EPC designing, petrochemical, chemical, refining, power generating, shipbuilding, heavy industries Oil and gas extractions, refining, petrochemical, chemical LNG, offshore developments, EPC designing, petrochemical, chemical, power generating, heavy industries LNG, offshore drilling, refining, petrochemical Oil and gas exploration, LNG, offshore drilling, power generating Exploration and oil extraction, LNG, offshore drilling Refining, LNG, petrochemical, chemical, EPC designing NVMV Ex-Protected Luminaires are suitable for applications in Zone 2 / Zone 21 / Zone 22 In manufacturing plants, refineries, chemical, petrochemical, and other industrial process facilities, waste or sewage treatment facilities, dockside and other heavy industrial applications In areas where combustible dusts or fibers may be present In areas where ignitable concentrations of flammable gases or vapors will be present In installations where moisture, dirt, dust, vibration, corrosion and rough usage are problematic 3

4 Champ NVMV Series - Ex-Protected Luminaires for IEC and ATEX Applications NVMV STANDARD SPECIFICATIONS GAS TYPE OF PROTECTION Ex nr II TGc Ex t IIIC TºC Db IP66 COMPLIANCE EN 79-, EN EN 79-, EN ATEX CLASSIFICATION II 3 G II 2 D ATEX CERTIFICATE LCIE 9 ATEX 12 LCIE 9 ATEX 38 AREA CLASSIFICATION Zone 2 acc IEC Zone 21 and 22 acc IEC MATERIALS AND FINISHES DUST Ballast housing and mountings - copper-free aluminum Exterior hardware - stainless steel (type 34) Reflectors (dome and angle) - Krydon fiberglass-reinforced polyester Globes - heat and impact-resistant glass Guards - copper-free aluminum and stainless steel (large housing - stainless steel only) ENTRY Up to 4 x M2, M25, M32, 1 2 NPT and 3 4 NPT & 1 NPT cable entries (1 1 2 NPT for stanchion only) TERMINATION 3 Core 6mm 2 max (standard); 6 x 6mm 2 for looping (available upon request) INSTALLATION Ceiling Mount, Wall Mount, Stanchion Mount, Pendant Mount LAMP HOLDER E27 or E4 LAMP TYPE HSE/HST (high pressure sodium lamp) and HIE (metal halide lamp) LAMP POWER 7W, 1W, 15W, 25W, and 4W CONTROL GEAR Integrated ballast, thermal cut-off functionality incorporated into control gear RE-LAMPING Access via restricted breathing lamp chamber BURNING POSITION Base up; up to 25 off vertical INGRESS PROTECTION IP66 to EN 529 WEIGHTS See pages 7 and 1 ELECTRICAL SUPPLY 22, 23, 24V 5Hz and 22, 23V Hz CERTIFICATION DECODING 4 Type of Protection refers to luminaire construction ATEX Classification refers to application Ex nr II TGc Explosion Protected Restricted Breathing Enclosure Ex t IIIC TºC Db IP66 Explosion Protected, Protected by Enclosure from Dust Ingress Example: II 3G ie (or Ex) Explosion protected in accordance with ATEX II Group II surface industries (above ground) 3 Category 3 equipment (suitable for use in Zone 2) Note: Category 2 is suitable for use in Zone 1 G Suitable for atmosphere containing gas Note: D is suitable for atmospheres containing dust Explosion protected Restricted breathing enclosure Gas group classification Temperatures (see tables on page 5) Equipment protection level G - Gas c - Zone 2 Explosion protected Protected by enclosure Dust group classification Temperatures (see tables on page 5) Equipment protection level D - Dust b - Zone 21 Ex nr II T Gc Ex t IIIC TºC Db IP66 Ingress Protection First 6 - totally protected against dust Second 6 - protected against strong water jets from all directions

5 TEMPERATURE PERFORMANCE Refer to temperature performance data tables (below) to select luminaire that is suitable for your area specifications These numbers are the maximum surface temperature of the luminaire Note: T3 maximum surface temperature 2 C T4 maximum surface temperature 135 C For example: atmospheres that contain gasoline and have an ignition temperature of 536 C, any fixture with the T-rating in this table can be used Atmospheres that contain diethyl ether and have an ignition temperature of 1 C require a luminaire with T4 ratings Catalog Number Example NVMVS1MC75* Watts 7W NVMVS1MC15* 1W NVMVS1MC155* 15W NVMVS1MC255* 25W NVMVM1MC75* 7W NVMVM1MC15* 1W NVMVM1MC155* 15W NVMVM1MC255* 25W Lamp Type HSE/ HST (HPS) HIE (MH) Cat No Shown with M2 Ceiling Mount, /23V, 5 Hz NVMV 7W - 25W (Small Housing) GAS (Class I, Zone 2) Ex nr II TGc DUST (Class II, Zone 21) Ex t IIIC TDb With G34 With G251 With With G34 With G251 Rated Lamp With G34 With G251 Globe and Globe and With G34 G251Globe Globe and Globe and Ambient C Holder Globe Only Globe Only Reflector Reflector Globe Only Only Reflector Reflector 4 T4 T4 T4 T4 99ºC 19ºC 14ºC 19ºC 5 E27 T4 T4 T4 T4 19ºC 119ºC 114ºC 119ºC 55 T4 T4 T4 T4 114ºC 124ºC 119ºC 124ºC 4 T4 T4 T4 T4 99ºC 117ºC 14ºC 128ºC 5 E4 T4 T4 T4 T3 19ºC 127ºC 114ºC 138ºC 55 T4 T3 T4 T3 114ºC 132ºC 119ºC 143ºC 4 T4 T3 T3 T3 122ºC 14ºC 14ºC 14ºC 5 E4 T3 T3 T3 T3 132ºC 15ºC 15ºC 15ºC 55 T3 T3 T3 T3 137ºC 155ºC 155ºC 155ºC 4 T3 T3 T3 T2 168ºC 174ºC 189ºC 218ºC 5 E4 T3 T3 T2 T2 178ºC 184ºC 199ºC 228ºC 55 T3 T3 T2 T2 183ºC 189ºC 24ºC 233ºC 4 T4 T4 T4 T4 99ºC 19ºC 14ºC 19ºC 5 E27 T4 T4 T4 T4 19ºC 119ºC 114ºC 119ºC 55 T4 T4 T4 T4 114ºC 124ºC 119ºC 124ºC 4 T4 T4 T4 T4 99ºC 117ºC 14ºC 128ºC 5 E27 T4 T4 T4 T3 19ºC 127ºC 114ºC 138ºC 55 T4 T3 T4 T3 114ºC 132ºC 119ºC 143ºC 4 T4 T3 T3 T3 122ºC 14ºC 14ºC 14ºC 5 E27 T3 T3 T3 T3 132ºC 15ºC 15ºC 15ºC 55 T3 T3 T3 T3 137ºC 155ºC 155ºC 155ºC 4 T3 T3 T3 T2 168ºC 194ºC 189ºC 218ºC 5 E4 T3 T2 T2 T2 178ºC 24ºC 199ºC 228ºC 55 T3 T2 T2 T2 183ºC 29ºC 24ºC 233ºC NVMV 25W - 4W (Large Housing) GAS (Class I, Zone 2) Ex nr II TGc DUST (Class II, Zone 21) Ex t IIIC TDb Catalog Number Example Watts Lamp Type NVMVS1MC255 * L 25W HSE/ HST NVMVS1MC45 * L 4W (HPS) NVMVM1MC255*L NVMVM1MC45*L 25W 4W HIE (MH) Rated Ambient C Lamp Holder With G33 Globe Only With G33 Globe and Reflector With G33 Globe Only With G33 Globe and Reflector 4 T3 T3 137ºC 137ºC 5 E4 T3 T3 147ºC 147ºC 55 T3 T3 152ºC 152ºC 4 T3 T3 159ºC 175ºC 5 E4 T3 T3 169ºC 185ºC 55 T3 T3 174ºC 19ºC 4 T3 T3 137ºC 137ºC 5 E4 T3 T3 147ºC 147ºC 55 T3 T3 152ºC 152ºC 4 T3 T3 159ºC 193ºC 5 E4 T3 T2 169ºC 23ºC 55 T3 T2 174ºC 28ºC 5

6 Champ NVMV Series - Ex-Protected Luminaires for IEC and ATEX Applications ORDERING INFORMATION Ordering Example: to complete part number, select ordering options from tables below and display them in the following order NVMV S 1M C 7 5 P O O /OPTION Series Entry Lamp Type Wattage Guard Mounting Voltage Standard Body Options EXAMPLE OF COMPLETED PART NUMBER - SMALL BODY: NVMVS1MC75P NVMV S 1M C 7 5 P Series Lamp Entry Mounting* Wattage Voltage Guard Body NVMV Luminaire IEC Gear S= HSE/ HST (HPS) M=HIE (MH) 1M=M2 2M=M25 3M=M32 1N= 1 2 NPT 2N= 3 4 NPT 3N=1 NPT 5N=1 1 2 NPT (For Stanchion) C=Ceiling W=Wall J=Stanchion 7=7W 1=1W 15=15W 25=25W 3=22V/5Hz 5=23V/5Hz 6=24V/5Hz 4=22V/Hz 7=23V/Hz O=without Guard G34 globe P=G251 Globe with P22 alum guard S=G251 Globe with P22 SS34 guard O=Small body O=Standard EXAMPLE OF COMPLETED PART NUMBER - LARGE BODY: NVMVS1MC255PL NVMV S 1M C 25 5 P L Series Lamp Entry Mounting* Wattage Voltage Guard Body NVMV Luminaire IEC Gear S= HSE/ HST (HPS) M=HIE (MH) 1M=M2 2M=M25 3M=M32 1N= 1 2 NPT 2N= 3 4 NPT 3N=1 NPT 5N=1 1 2 NPT (For Stanchion) C=Ceiling W=Wall J=Stanchion 25=25W 4=4W 3=22V/5Hz 5=23V/5Hz 6=24V/5Hz 4=22V/Hz 7=23V/Hz O=without Guard G33 globe P=G33 Globe with P33 SS guard L=Large body O=Standard *For pendant mounting, order ceiling mount with pendant bracket accessory - please consult factory OPTIONS AND ACCESSORIES CHAMP QUICK-CLIP /IR /RD7 Instant restrike (1W HPS & 15W HPS) (alternative solution to dual arc lamps) Dome reflector - small housing Step 1 Wire the luminaire /RA7 /RD739 3 angle reflector - small housing Dome reflector - large housing Step 2 With one hand on your ladder for safety, simply swing the housing closed until the Quick-Clip attaches to the cover /RA739 3 angle reflector - large housing /S89 Champ Quick-Clip Step 3 With both hands free, effortlessly tighten the screw 6

7 LUMINAIRE BREAKDOWN INTO COMPONENT PARTS Choose component parts below based on ordering information on page 6 Components can be ordered separately or as replacement parts Ceiling (C) NCM2 M2 x 15 NCM25 M2 x 15 NCM32 M2 x 15 NC1N 1/2 NPT NC2N NC3N 3/4 NPT 1 NPT (15kg) Pendant (See Figure 1) (1kg) NVMV 7W - 25W Wall (W) NTWM2 M2 x 15 NTWM25 M2 x 15 NTWM32 M2 x 15 NTW1N 1/2 NPT NTW2N NTW3N 3/4 NPT 1 NPT (189kg) Stanchion (J) NJ5N 1-1/2 NPT (188kg) Figure 1 Ballast Housing Globe G34 (135kg) Globe G251 (129kg) Guard P22 Aluminum (49kg) Guard P22 Stainless Steel (32kg) Note: for pendant mount installation - order ceiling mount and bracket NAPM Reflector RD7 (kg) Reflector RA7 (kg) NVMV 25W - 4W Ceiling (C) NCM2 M2 x 15 NCM25 M2 x 15 NCM32 M2 x 15 NC1N 1/2 NPT NC2N NC3N 3/4 NPT 1 NPT (15kg) Pendant (See Figure 1) (1kg) Wall (W) NTWM2 M2 x 15 NTWM25 M2 x 15 NTWM32 M2 x 15 NTW1N 1/2 NPT NTW2N NTW3N 3/4 NPT 1 NPT (189kg) Stanchion (J) NJ5N 1-1/2 NPT (188kg) Figure 1 Ballast Housing Globe G33 (18kg) Guard P33 Stainless Steel (45kg) Note: for pendant mount installation - order ceiling mount and bracket NAPM Reflector RD739 (56kg) Reflector RA739 (79kg) 7

8 Champ NVMV Series - Ex-Protected Luminaires for IEC and ATEX Applications CABLING OPTIONS (for additional cable gland options, please see Cooper Crouse-Hinds Global Cable Gland Solutions catalog) To terminate electrical wiring and cords, use cable glands wiring method example below: Correctly selected cable gland must: 1) Mate correctly with type of cable used 2) Mate correctly with outside diameter of cable used 3) Be suitable with area classifications 4) Be ATEX certified 5) Be IP66 rated 6) Have a male end thread that mates correctly with cover thread Refer to thread sizes in ordering table on page 6 CABLE GLAND EXAMPLES CABLE EXAMPLES ADE 1F Non-armoured Non-armoured gland for use with non-armoured cable Steel wire armoured (SWA) ADE 4F * Steel wire braided (SWB) Armoured gland for use with SWA, SWB, STA, braided marine shipboard, and lead sheathed cables (with addition of earthing washer) Steel tape armoured (STA) Braided marine shipboard ADE 6F * Armoured gland for use with SWA, SWB, STA, and braided marine shipboard cables Lead sheathed *Example shown with SWB cable Note - To view our complete offering of global cable glands for hazardous and industrial environments, please visit wwwcrouse-hindscom/cableglands 8

9 LAMP SELECTION GUIDE Refer to the table below to select catalog number for lamp per lamp manufacturer WATTAGE LAMP TYPE LAMP BASE 7W HSE/HST (HPS) E27 1W HSE/HST (HPS) E4 15W HSE/HST (HPS) E4 25W HSE/HST (HPS) E4 4W HSE/HST (HPS) E4 7W HIE (MH) E27 1W HIE (MH) E27 15W HIE (MH) E27 25W HIE (MH) E4 4W HIE (MH) E4 LU7/9/T/27 LU7/9/D/27 LU7/9/XO/T/27 LU1/1/MO/T/4 LU1/1/D/4 LU1/1/XO/T/4 LU15/1/T/4 LU15/1/D/4 LU15/15/XO/T/4 LU25/T/4 LU25/D/4 LU25/XO/T/4 LU4/T/4 LU4/D/4 LU4/XO/T/4 MANUFACTURER GE LAMP OSRAM LAMP PHILIPS LAMP ARC7/E/U/74/E27 CMH7/TT/UVC/83/E27 CMH7/E/UVC/83/E27/C ARC1/E/U/74/E27 CMH1/E/UVC/I/83/E27/C ARC15/E/U/74/E27 CMH15/TT/UVC/83/E4 NAV-T 7 NAV-E 7 NAV-T 7 SUPER 4Y NAV-T 1 SUPER 4Y NAV-E 1 SUPER 4Y NAV-T 15 NAV-E 15 NAV-T 25 NAV-E 25 NAV-T 4 NAV-E 4 HQI-E 7/NDL HQI-E 1/NDL HQI-E15/NDL ARC25/T/U/74/E4 HQI-E 25/D HQI-T-25/D ARC4/T/U/74/E4 HQI-E 4/D HQI-T 4/N NAV-T 15 SUPER 4Y NAV-E 15 SUPER 4Y NAV-T 25 SUPER 4Y NAV-E 25 SUPER 4Y NAV-T 4 SUPER 4Y NAV-E 4 SUPER 4Y SON7WES SONT7WES SONPLUS7WES SONT1WES SONPLUS1WGES SON15WGES SONT15WES SONPLUS15WGES SON25WGES SONT25WGES SONPLUS25WGES SON4WGES SONT4WGES SONPLUS4WGES MH7WES MH1WES MH15WES HPIPLUS25WBUGES HPITPLUS25WGES HPIPLUS4WBUGES HPITPLUS4WGES CIRCUIT SIZING Refer to the table below for line currents that will assist in sizing of the circuit branch FITTING TYPE AND WATTAGE 22V 5HZ RUNNING CURRENT STARTING CURRENT OPEN CIRCUIT CURRENT 22V HZ 23V 5HZ 23V HZ 24V 5HZ 22V 5HZ 22V HZ 23V 5HZ 23V HZ 24V 5HZ 22V 5HZ 22V HZ 23V 5HZ 23V HZ 24V 5HZ HPS/MH - 7W 42A 42A 4A 4A 39A 53A 53A 5A 5A 5A 87A 14A 91A 19A 95A HPS/MH - 1W 58A 58A 57A 56A 54A 73A 73A 71A 7A 7A 87A 14A 91A 19A 95A HPS/MH - 15W 86A 86A 82A 82A 79A 18A 18A 13A 1A 1A 131A 157A 136A 164A 142A HPS/MH - 25W 136A 136A 131A 13A 125A 24A 24A 197A 195A 188A 131A 157A 136A 164A 142A HPS/MH - 4W 214A 215A 27A 26A 198A 321A 323A 311A 39A 297A 181A 218A 19A 227A 198A 9

10 8 8 Champ NVMV Series - Ex-Protected Luminaires for IEC and ATEX Applications DIMENSIONS NVMV 7W - 25W Pendant (77kg) Ceiling (76kg) Wall (8kg) Stanchion (8kg) NVMV 25W - 4W Pendant (211kg) Ceiling (21kg) Wall (214kg) Stanchion (214kg) MTG S LOTS 8mm WIDT H 276 REFLECTOR DIMENSIONS RD7 (for 7W - 25W) RD739 (for 25W - 4W) RA7 and RA739 (Small & Large Housing) ø 133mm ø 146mm ø 254mm MTG SLOTS 8mm width ø 429mm ø 429mm ø 429mm 3 angle ø 429mm (kg) (56kg) (RA7 - kg; RA739-79kg) 1

11 LIGHTING APPLICATION AND DESIGN Lighting layouts, analysis and designs from Cooper Crouse-Hinds deliver a real competitive advantage In the past, engineers had to calculate lighting layouts and design using complex mathematical formulas also known as the Lumen Method and Point-By-Point Method Today, there are software programs that can easily run these calculations very quickly Lighting layouts, analysis and designs from Cooper Crouse- Hinds deliver a real competitive advantage For over 1 years Cooper Crouse-Hinds has been providing hazardous area lighting solutions Our light fittings are manufactured to the highest standards and will provide years of reliable service and performance under the harshest conditions LIGHTING SOFTWARE Cooper Crouse-Hinds LUXICON software program makes it very easy to perform lighting calculations and professional quality designs Our latest version, LUXICON 2525, is distributed free of charge and includes a tutorial to introduce users to its operation and several Wizards that will assist in a step-by-step process to create your own lighting design You can also add in objects that will account for light inference caused by equipment, walls, and other obstructions in the work area It will also provide detail point-by-point calculations and statistical analysis LIGHTING LAYOUT SERVICES Point-by-point light calculation in plan view Need help with a more complex lighting design or analysis? Then take advantage of our free lighting design service using AGi32 software Our lighting designers can provide you with lighting layouts for more complex projects that will interface with the latest version of AutoCAD drawings and will provide a more detailed lighting analysis Calculations shown with light fitting placement Illuminance rendering CONTACT US: For complete IES files and additional wattages, please log onto wwwcrouse-hindscom and go to Services and Support > Photometric Information or contact Bob Wisniewski ( BobWisniewski@cooperindustriescom) To order a copy of Cooper Crouse-Hinds LUXICON software or to take advantage of this service, contact your Cooper Crouse-Hinds sales representative or contact one of our Lighting Layout Specialists directly: - For North and South America, Europe, and Middle East Regions, contact Bob Wisniewski ( BobWisniewski@cooperindustriescom) - For Asia Pacific Region, contact Pauline Yang ( PaulineYang@cooperindustriescom) 11

12 Champ NVMV Series - Ex-Protected Luminaires for IEC and ATEX Applications PHOTOMETRY: LARGE HOUSING For complete IES files and additional wattages, please log onto wwwcrouse-hindscom and go to Services and Support > Photometric Information or contact Bob Wisniewski ( BobWisniewski@cooperindustriescom) NVMV 4 WATT HSE - GLOBE AND GUARD ONLY LAMP: 4W HSE LIGHT OUTPUT UP: 219% LIGHT OUTPUT DOWN: 442% -/ C / C9 /27 Ceiling 8% 7% 5% 3% 1% Wall 5% 3% 1% 5% 3% 1% 5% 3% 1% 5% 3% 1% 5% 3% 1% Floor 2% 2% 2% 2% 2% NVMV 4 WATT HSE - GLOBE AND DOME REFLECTOR LAMP: 4W HSE LIGHT OUTPUT UP: 16% LIGHT OUTPUT DOWN: 44% -/ C / C9 /27 Ceiling 8% 7% 5% 3% 1% Wall 5% 3% 1% 5% 3% 1% 5% 3% 1% 5% 3% 1% 5% 3% 1% Floor 2% 2% 2% 2% 2% NVMV 4 WATT HSE - GLOBE AND 3 ANGLE REFLECTOR LAMP: 4W HSE LIGHT OUTPUT UP: 46% LIGHT OUTPUT DOWN: 395% -/ C / C9 /27 Ceiling 8% 7% 5% 3% 1% Wall 5% 3% 1% 5% 3% 1% 5% 3% 1% 5% 3% 1% 5% 3% 1% Floor 2% 2% 2% 2% 2%

13 PHOTOMETRY: LARGE HOUSING For complete IES files and additional wattages, please log onto wwwcrouse-hindscom and go to Services and Support > Photometric Information or contact Bob Wisniewski ( NVMV 25 WATT HSE - GLOBE AND GUARD ONLY LAMP: 25W HSE LIGHT OUTPUT UP: 219% LIGHT OUTPUT DOWN: 442% C / C9 /27 Ceiling 8% 7% 5% 3% 1% Wall 5% 3% 1% 5% 3% 1% 5% 3% 1% 5% 3% 1% 5% 3% 1% Floor 2% 2% 2% 2% 2% NVMV 25 WATT HSE - GLOBE AND DOME REFLECTOR LAMP: 25W HSE LIGHT OUTPUT UP: 16% LIGHT OUTPUT DOWN: 44% C / C9 /27 Ceiling 8% 7% 5% 3% 1% Wall 5% 3% 1% 5% 3% 1% 5% 3% 1% 5% 3% 1% 5% 3% 1% Floor 2% 2% 2% 2% 2% NVMV 25 WATT HSE - GLOBE AND 3 ANGLE REFLECTOR LAMP: 25W HSE LIGHT OUTPUT UP: 46% LIGHT OUTPUT DOWN: 395% C / C9 /27 Ceiling 8% 7% 5% 3% 1% Wall 5% 3% 1% 5% 3% 1% 5% 3% 1% 5% 3% 1% 5% 3% 1% Floor 2% 2% 2% 2% 2%

14 Champ NVMV Series - Ex-Protected Luminaires for IEC and ATEX Applications PHOTOMETRY: SMALL HOUSING For complete IES files and additional wattages, please log onto wwwcrouse-hindscom and go to Services and Support > Photometric Information or contact Bob Wisniewski ( BobWisniewski@cooperindustriescom) NVMV 15 WATT HSE - GLOBE AND GUARD ONLY LAMP: 15W HSE LIGHT OUTPUT UP: 36% LIGHT OUTPUT DOWN: 514% -/ C / C9 /27 Ceiling 8% 7% 5% 3% 1% Wall 5% 3% 1% 5% 3% 1% 5% 3% 1% 5% 3% 1% 5% 3% 1% Floor 2% 2% 2% 2% 2% NVMV 15 WATT HSE - GLOBE AND DOME REFLECTOR LAMP: 15W HSE LIGHT OUTPUT UP: 24% LIGHT OUTPUT DOWN: 681% -/ C / C9 /27 Ceiling 8% 7% 5% 3% 1% Wall 5% 3% 1% 5% 3% 1% 5% 3% 1% 5% 3% 1% 5% 3% 1% Floor 2% 2% 2% 2% 2% NVMV 15 WATT HSE - GLOBE AND 3 ANGLE REFLECTOR LAMP: 15W HSE LIGHT OUTPUT UP: 76% LIGHT OUTPUT DOWN: 643% -/ C / C9 /27 Ceiling 8% 7% 5% 3% 1% Wall 5% 3% 1% 5% 3% 1% 5% 3% 1% 5% 3% 1% 5% 3% 1% Floor 2% 2% 2% 2% 2%

15 PHOTOMETRY: SMALL HOUSING For complete IES files and additional wattages, please log onto wwwcrouse-hindscom and go to Services and Support > Photometric Information or contact Bob Wisniewski ( NVMV 15 WATT HIE - GLOBE AND GUARD ONLY 15W HIE LIGHT OUTPUT UP: 36% LIGHT OUTPUT DOWN: 514% -/ C / C9 /27 Ceiling 8% 7% 5% 3% 1% Wall 5% 3% 1% 5% 3% 1% 5% 3% 1% 5% 3% 1% 5% 3% 1% Floor 2% 2% 2% 2% 2% NVMV 15 WATT HIE - GLOBE AND DOME REFLECTOR 15W HIE LIGHT OUTPUT UP: 24% LIGHT OUTPUT DOWN: 681% -/ C / C9 /27 Ceiling 8% 7% 5% 3% 1% Wall 5% 3% 1% 5% 3% 1% 5% 3% 1% 5% 3% 1% 5% 3% 1% Floor 2% 2% 2% 2% 2% NVMV 15 WATT HIE - GLOBE AND 3 ANGLE REFLECTOR 15W HIE LIGHT OUTPUT UP: 76% LIGHT OUTPUT DOWN: 643% -/ C / C9 /27 Ceiling 8% 7% 5% 3% 1% Wall 5% 3% 1% 5% 3% 1% 5% 3% 1% 5% 3% 1% 5% 3% 1% Floor 2% 2% 2% 2% 2%

16 For more information: If further assistance is required, please contact an authorized Cooper Crouse-Hinds Distributor, Sales Office, or Customer Service Department US (Global Headquarters): Cooper Crouse-Hinds Wolf & Seventh North Streets Syracuse, NY (866) FAX: (315) FAX Orders Only: (866) Canada: Cooper Crouse-Hinds Canada Toll Free: FAX: (8) FAX Orders only: (866) Mexico/Latin America/Caribbean: Cooper Crouse-Hinds, SA de CV FAX: Europe (Germany): Cooper Crouse-Hinds GmbH 49 () () Middle East (Dubai): Cooper Crouse-Hinds LLC FAX: Singapore: Cooper Crouse-Hinds Pte Ltd FAX: chsi-sales@cooperindustriescom China: Cooper Crouse-Hinds Pte Ltd FAX: cchsales@cooperindustriescom Korea: Cooper Crouse-Hinds Korea CCHK-sales@cooperindustriescom Australia: Cooper Electrical Australia FAX: CEASales@cooperindustriescom India: Cooper India Pvt Ltd FAX: cchindia@cooperindustriescom wwwcrouse-hindscom Cooper Crouse-Hinds is a registered trademark of Cooper Industries, Inc 29 Cooper Industries, Inc Your Authorized Cooper Crouse-Hinds Distributor is: Cooper Industries, Ltd Travis, Ste 58 Houston, TX P: wwwcooperindustriescom Printed in USA