CERTIFICATE. Freudenberg Sealing Technologies GmbH & Co. KG. with the organizational units/sites as listed in the annex
|
|
|
- Violet Robbins
- 6 years ago
- Views:
Transcription
1 CERTIFICATE This is to certify that with the organizational units/sites as listed in the annex has implemented and maintains an Occupational Health and Safety Management System. : Development, production and distribution of seals and encoders Through an audit, documented in a report, it was verified that the management system fulfills the requirements of the following standard: BS OHSAS : 2007 Certificate registration no. Date of revision Valid from Valid until Date of certification BSOH DQS GmbH Götz Blechschmidt Managing Director Accredited Body: DQS GmbH, August-Schanz-Straße 21, Frankfurt am Main 1 / 7
2 Freudenberg Sealing Technologies Austria GmbH Sparchner Straße Kufstein Austria Development and manufacturing of rubber bonded parts and rubber precision parts Tĕsnĕní a pružné elementy, k.s. Lesni Opatovice nad Labem Czech Republic Manufacture of radial shaft seals Groß-Berliner Damm Berlin Development and production of boots and bellows Industriestraße Hamburg Development, manufacturing and distribution, guide rings for hydraulic/pneumatic/process products and custom molded parts made of PUR, PTFE, rubber, fabrics and compounds thereof Ascheröder Straße Schwalmstadt Development, production and distribution of seals and encoders with the above-mentioned certificate. 2 / 7
3 Integral-Accumulator GmbH Sinziger Strasse Remagen Development and manufacturing of hydraulic accumulators and hydraulic equipment Bahnhofstraße Reichelsheim Development and production of diaphragma, composite parts, precision moulding parts and PTFE-parts Oil Seals Weinheim Weinheim Development, production and distribution of seals and encoders Mixing Facility Weinheim Development, production and distribution of elastomer compounds Components Facility Weinheim Manufacturing and processing of punched and formed parts with the above-mentioned certificate. 3 / 7
4 Freudenberg DS Tooling Center GmbH & Co. KG Dr. Werner Freyberg Str Laudenbach Production and sales of tools for the processing of elastomers as well as consulting and service Lederer GmbH Im Sichert Öhringen Development, construction, toolmaking and injection molding of liquid silicon rubber (LSR) parts and 2 component parts Oberwihl Görwihl Development, manufacturing, coating and distribution of o-rings and manufacturing of brake caps Freudenberg Sealing Technologies, S.L.U. Poligono Industrial Can Volart C/Gurri, PARETS DEL VALLÈS Spain Production and sales of shock absorbers seals Freudenberg Joints Elastomères SAS Zone Industrielle les Franchises Langres Cedex France Manufacturing of gaskets with the above-mentioned certificate. 4 / 7
5 Freudenberg Sealing Technologies S.A.S. Zone Industrielle les Franchises Langres Cedex France Development, production and sales of engine oil seals as a European Lead Centre and Production Partner for non engine oil seals Freudenberg Joints Plats S.A.S. Le Betout 2 Route de Nantiat Chamborêt France Development and manufacturing of elastomer and over moulded parts Freudenberg Technical Products LP Unit A Merlin Way New York Industrial Estate North Shields, Tyne & Wear NE27 OQH Great Britain Development and manufacturing of shock absorber parts including coated pistons, manufacturing of radial shaft seals Freudenberg Sealing Technologies Kft. Heliport reptér 6000 Kecskemét-Kadafalva Hungary Manufacturing of sealing products for automotive industry Freudenberg Tömítés Ipari Kft. Dózsa György út Lajosmizse Hungary Production of elastomer compounds and precision molded parts with the above-mentioned certificate. 5 / 7
6 Via 1 Maggio 177/ Luserna San Giovanni (To) Design and manufacturing of cassette seals and radial shaft seals Via 1 Maggio 213/ Luserna (TO) Process development of production machine, manufacturing of tool for processing of elastomers Via Cascina Garola, 6/ Luserna San Giovanni (To) Manufacturing and processing of stamping parts Industrial Estate Porporata, Via Ferrua PINEROLO (TO) Design and manufacturing of valve stem seals and radial shaft seals Viale Industria trav. 1. n Castelli Calepio Design and manufacturing of o-rings with the above-mentioned certificate. 6 / 7
7 Freudenberg Sealing Technologies Sanayi ve Ticaret A.Ş. Plant NOSAB N 204.Sokak No: Bursa Turkey Production of seals and encoders with the above-mentioned certificate. 7 / 7
CERTIFICATE. Through an audit, documented in a report, it was verified that the management system fulfills the requirements of the following standard:
CERTIFICATE This is to certify that with the organizational units/sites as listed in the annex has implemented and maintains an Energy Management System. : parts, strainers, cylinderhead- and oil pan semi
VDA-Wintermeeting 15 th February of 2007 Saalfelden, Austria. Sealing Solutions for CO 2 -HVAC Systems. Dr. Ulrich Frenzel
VDA-Wintermeeting 15 th February of 2007 Saalfelden, Austria Sealing Solutions for CO 2 -HVAC Systems Dr. Ulrich Frenzel Freudenberg GmbH & Co. KG INNOVATIONCENTER, Weinheim Freudenberg Group - Corporate
CERTIFICATE. ElringKlinger AG
CERTIFICATE This is to certify that with the organizational units/sites as listed in the annex has implemented and maintains an Environmental Management System. : Development and manufacturing of gaskets,
CERTIFICATE. with the organizational units/sites as listed in the annex
CERTIFICATE This is to certify that DURA Holding GmbH with the organizational units/sites as listed in the annex has implemented and maintains an Energy Management System. Scope: Design, Development, Engineering,
CERTIFICATE. Dura Automotive Systems Group. with the organizational units/sites as listed in the annex
CERTIFICATE This is to certify that with the organizational units/sites as listed in the annex has implemented and maintains an Environmental Management System. : Design, Development, Engineering, Marketing,
CERTIFICATE. Dura Automotive Systems Group. with the organizational units/sites as listed in the annex
CERTIFICATE This is to certify that with the organizational units/sites as listed in the annex has implemented and maintains an Energy Management System. : Design, development, engineering, marketing,
corteco a WiDE range of SErvicES tailored to customer needs.
corteco a WiDE range of SErvicES tailored to customer needs. CustoMEr-oriEntEd MarkEting global presence, CLosE proximity Continuous range development Integrated quality and technical department for each
CERTIFICATE. Continental Automotive Group. with the organizational units/sites as listed in the annex
CERTIFICATE This is to certify that with the organizational units/sites as listed in the annex has implemented and maintains an Energy Management System. : Development, design, production, testing and
CERTIFICATE. IQNet and DQS GmbH Deutsche Gesellschaft zur Zertifizierung von Managementsystemen hereby certify that the company
CERTIFICATE IQNet and DQS GmbH Deutsche Gesellschaft zur Zertifizierung von Managementsystemen hereby certify that the company with the organizational units/sites as listed in the annex has implemented
CERTIFICATE. DQS Holding GmbH has issued an IQNet recognized certificate that the organization. ebm-papst Mulfingen GmbH & Co. KG
CERTIFICATE DQS Holding GmbH has issued an IQNet recognized certificate that the organization with the organizational units/sites as listed in the annex has implemented and maintains a Quality Management
GERTIFICATE. tl.,(" tru(,h. ISO 9001 i 2015 LENZE SE. ( DAKKS Deutsche Akkreditierungsstelle D-ZM t5. DQS GmbH. This is to certify that
GERTIFICATE This is to certify that with the organizational units/sites as listed in the annex has implemented and maintains a Quality Management System : Design, production, sales and service of electronic
CERTIFICATE. with the organizational units/sites as listed in the annex. has implemented and maintains a Quality and Environmental Management System.
CERTIFICATE This is to certify that Kennedyplatz 1 with the organizational units/sites as listed in the annex has implemented and maintains a Quality and Environmental Management System. Scope: General
CERTIFICATE. WIKA Alexander Wiegand SE & Co. KG. with the organizational units/sites as listed in the annex
CERTIFICATE This is to certify that with the organizational units/sites as listed in the annex has implemented and maintains a Quality Management System. : Development, production, calibration and sale
CERTIFICATE. with the organizational units/sites as listed in the annex. Scope: Development, Production and Marketing & Sales of Specialty Chemicals
CERTIFICATE This is to certify that with the organizational units/sites as listed in the annex has implemented and maintains an Energy Management System. Scope: Development, Production and Marketing &
CERTIFICATE. Webasto Roof & Components SE Kraillinger Straße Stockdorf, Germany
CERTIFICATE The Certification Body of TÜV SÜD Management Service GmbH certifies that Kraillinger Straße 5 82131 Stockdorf, Friedrichshafener Straße 9 82205 Gilching, including the sites and scope of application
-Shape the Future with Manufacturing Technology
-Shape the Future with Manufacturing Technology GmbH & Co. KG Wilhelm-Harting-Straße 1 D-32339 Espelkamp Tel. 05772/47-97500 Fax 05772/47-537 Internet: www.--.com E-Mail:.applied@.com P. 1 / 18 in Germany
CERTIFICATE. WIKA Alexander Wiegand SE & Co. KG. with the organizational units/sites as listed in the annex
CERTIFICATE This is to certify that with the organizational units/sites as listed in the annex has implemented and maintains a Quality Management System. : Development, production, calibration and sale
CERTIFICATE. Siemens AG Siemens Certification Authority. has implemented the specification listed below for the following certification services.
CERTIFICATE This is to certify that Werner-von-Siemens-Straße 1 80333 München has implemented the specification listed below for the following certification services. Scope: / Trust Service Provider (TSP)
UNLEASH THE POWER REAL-WORLD SOLUTIONS
FLUID POWER UNLEASH THE POWER The fluid power industry is not only solidifying a hold on current applications, it is unleashing its knowledge into everincreasing frontiers. Excessive temperature and diverse
(~k~~!~~:e'"ngsstelle
~ (~k~~!~~:e'"ngsstelle Deutsche GmbH German Accreditation Body Entrusted according to Section 8 subsection1 AkkStelleG in connection with Section 1 subsection 1 AkkStelleGBV Signatory to the Multilateral
YAZAKI Europe Limited Robert-Bosch-Straße Köln (Cologne) Germany
CERTIFICATE Management system as per In accordance with TÜV NORD CERT procedures, it is hereby certified that with the locations according to the annex applies a management system in line with the above
Motherson was founded. First cable factory started. Injection Moulding. Cutting Tool Manufacturing. Cockpit Assemblies. Automotive Mirrors
Year 1975 History Motherson was founded 1977 First cable factory started 1983 1986 Technical agreement with Tokai Electric Co. (Now Sumitomo Wiring Systems-Japan) Wiring Harness Establishment of Motherson
2018 COMPANY PROFILE
2018 COMPANY PROFILE Million HEADQUARTER Rotary Shaft Oil Seals and custom made articles to drawing in elastomer and rubber-to-metal DIVISION LARGE OIL SEALS Special and large size Rotary shaft oil seals
Corteco - Automotive Spare Parts in OEM Quality
COMPANY PROFILE Corteco - Automotive Spare Parts in OEM Quality Corteco is the IAM specialist of the Freudenberg Group for seals and vibration technology as well as cabin air filters. Garages benefit from
FREUDENBERG XPRESS CUSTOM-MANUFACTURED SEALS
FREUDENBERG XPRESS FREUDENBERG XPRESS CUSTOM-MANUFACTURED SEALS In today s economic environment Freudenberg Xpress is the clear solution for companies needing precise and speedy results. Short turnaround,
Pumps and Flow Measurement for the Polyurethanes Industry
Pumps and Flow Measurement for the Polyurethanes Industry 2 Pumps and flow measurement for the polyurethanes industry Content 3 Company 5 Gear Pumps for the Polyurethanes Industry 6 Pressure Relief Valves
ALLROUNDER 630 A. Distance between tie bars: 630 x 630 mm Clamping force: 2500 kn Injection unit (acc. to EUROMAP): 800, 1300, 2100.
Facts and figures ALLROUNDER Distance between tie bars: 630 x 630 mm Clamping force: 2500 kn Injection unit (acc. to EUROMAP): 800, 1300, 2100 www.arburg.com Machine dimensions 2217 227 1487 max. 450 877
820 S. Machine dimensions. Electrical connection. Cooling water connection 850 6) 878 7) 960 5) 113/438 4) ) ) ) )6) )
Facts and figures ALLROUNDER 820 S Distance between tie bars: 820 x 820 mm Clamping force: 4000 kn Injection unit (acc. to EUROMAP): 2100, 3200, 4600 www.arburg.com 820 S Machine dimensions 2250 5) 2342
ALLROUNDER 630 S. Distance between tie bars: 630 x 630 mm Clamping force: 2500 kn Injection unit (acc. to EUROMAP): 800, 1300, 2100.
Facts and figures ALLROUNDER 630 S Distance between tie bars: 630 x 630 mm Clamping force: 2500 kn Injection unit (acc. to EUROMAP): 800, 1300, 2100 www.arburg.com 630 S Machine dimensions 2183 5) 2207
Test Report: Reference Axle
Test Report: Reference Axle Legislation UNECE Regulation 13.11 to Supplements 10-13, Annex 11, Appendix 3 Test Details Location of Test: Date of Test: VCA Representative(s): Manufacturer s Representative(s):
Transformer Bushings Type COT COT kv to 245 kv up to 3150 A IEC 137
Transformer Bushings Type COT 5... COT 050 4 kv to 45 kv up to A IEC 37 Features If you need any transformer bushing proven in operation conditions around the world, Trench has it! experience in bushing
DIESEL SEALING SOLUTIONS
DIESEL SEALING SOLUTIONS FREUDENBERG DIESEL SEALING SOLUTIONS The Freudenberg product range offers more than 16,000 standard products and a multitude of customer-specific solutions, with outstanding seals
GLASS LINING TECHNOLOGIES. Bottom Outlet Valves
GLASS LINING TECHNOLOGIES Bottom Outlet Valves 1 Düker Bottom Outlet Valves Reliable, Resistant, Durable... Düker bottom outlet valves are known for their reliability and long service life together with
Facts and figures INTEGRALPICKER V.
Facts and figures INTEGRALPICKER V www.arburg.com INTEGRALPICKER V Technical data Stroke, X-axis F Stroke, Y axis Clamping surface fixed mould platen A H K D C B 135 G P Ejection chute B-axis M N L 2 Technical
ALLROUNDER 520 A multi-component
Facts and figures ALLROUNDER 52 A multi-component Distance between tie bars: 52 x 52 mm Clamping force: 15 kn Injection unit: 29, 4, 8 horizontal 7, 17, 29 vertical www.arburg.com 52 A multi-component
Certificate of Registration. Finelok / S-3.
This certifies that the Quality Management System of Finelok / S-3. 3995 Sladeview Crescent Unit #2 Mississauga, Ontario, L5L 5Y1, Canada has been assessed by NSF-ISR and found to be in conformance to
ALLROUNDER 720 S Multi-component
Facts and figures ALLROUNDER 72 S Multi-component Distance between tie bars: 72 x 72 mm Clamping force: 32 kn Injection unit: 13, 21, 32 horizontal 7, 1, 17, 29, 4 vertical www.arburg.com 72 S Multi-component
ALLROUNDER 720 H. Distance between tie bars: 720 x 720 mm Clamping force: 3200 kn Injection unit (according to EUROMAP): 1300, 2100, 3200
Facts and figures ALLROUNDER 72 H Distance between tie bars: 72 x 72 mm Clamping force: 32 kn Injection unit (according to EUROMAP): 13, 21, 32 www.arburg.com 72 H Machine dimensions 858 2198 max. 385
ALLROUNDER 520 A. Distance between tie bars: x (520 x 520 mm) Clamping force: 165 tons Injection unit: 6.1 oz, 8.2 oz, 15.
Facts and figures ALLROUNDER 52 A Distance between tie bars: 2.47 x 2.47 (52 x 52 mm) Clamping force: 165 tons Injection unit: 6.1 oz, 8.2 oz, 15.3 oz www.arburg.com 52 A Machine dimensions 78.8 53.7 33.44
ALLROUNDER 820 S Multi-component
Facts and figures ALLROUNDER 82 S Multi-component Distance between tie bars: 82 x 82 mm Clamping force: 4 kn Injection unit: 21, 32, 46 horizontal 7, 1, 17, 29, 4 vertical www.arburg.com 82 S Multi-component
ALLROUNDER 630 H. Distance between tie bars: 630 x 630 mm Clamping force: 2500 kn Injection unit (acc. to EUROMAP): 800, 1300, 2100.
Facts and figures ALLROUNDER 63 H Distance between tie bars: 63 x 63 mm Clamping force: 25 kn Injection unit (acc. to EUROMAP): 8, 13, 21 www.arburg.com 63 H Machine dimensions 858 438 1468 2198 max. 395
ALLROUNDER 370 E. Distance between tie bars: 370 x 370 mm Clamping force: 600 kn Injection unit (acc. to EUROMAP): 170, 290.
Facts and figures ALLROUNDER 37 E Distance between tie bars: 37 x 37 mm Clamping force: 6 kn Injection unit (acc. to EUROMAP): 17, 29 www.arburg.com 37 E Machine dimensions 215 122 85 12 33 435 192 245
ALLROUNDER 520 E. Distance between tie bars: 520 x 520 mm Clamping force: 1500 kn Injection unit (acc. to EUROMAP): 290, 400, 800.
Facts and figures ALLROUNDER 52 E Distance between tie bars: 52 x 52 mm Clamping force: 15 kn Injection unit (acc. to EUROMAP): 29, 4, www.arburg.com 52 E Machine dimensions 2 135 85 12 33 4 13 625 4885
DEUTSCHE NORM DIN EN 10080
DEUTSCHE NORM DIN EN 10080 August 2005 { ICS 77.140.15; 77.140.60; 77.140.65 Supersedes DIN V ENV 10080, August 1995 edition, parts of DIN 488-1, September 1984 edition, DIN 488-2, DIN 488-4 and DIN 488-6,
ALLROUNDER 470 S Multi-component
Facts and figures ALLROUNDER 47 S Multi-component Distance between tie bars: 47 x 47 mm Clamping force: 11 kn Injection unit: 17, 29, 4 horizontal 3, 7, 1, 17, 29 vertical www.arburg.com Machine dimensions
ALLROUNDER 570 H. Distance between tie bars: 570 x 570 mm Clamping force: 2000 kn Injection unit (acc. to EUROMAP): 400, 800, 1300.
Facts and figures ALLROUNDER 57 H Distance between tie bars: 57 x 57 mm Clamping force: 2 kn Injection unit (acc. to EUROMAP): 4, 8, 13 www.arburg.com 57 H Machine dimensions 22 148 85 438 2242 1) 2251
ALLROUNDER 270 A. Distance between tie bars: 270 x 270 mm Clamping force: 350 kn Injection unit (acc. to EUROMAP): 5, 70, 100.
Facts and figures ALLROUNDER 27 A Distance between tie bars: 27 x 27 mm Clamping force: 35 kn Injection unit (acc. to EUROMAP): 5, 7, 1 www.arburg.com 27 A Machine dimensions 238 122 12 425 254 438 191
Test Report: Reference Axle
Test Report: Reference Axle Legislation UNECE Regulation 13.11 to Supplements 10-13, Annex 11, Appendix 3 Test Details Location of Test: Hacı Sabancı Organized Zone / Sarıçam / Adana / Turkey Date of Test:
ALLROUNDER 270 C GOLDEN EDITION
Facts and figures ALLROUNDER 2 C GOLDEN EDITION Distance between tie bars: 2 x 2 mm Clamping force: 4 kn Injection unit (acc. to EUROMAP):, 1 www.arburg.com 2 C GOLDEN EDITION Machine dimensions 85 33
ALLROUNDER 570 C GOLDEN EDITION
Facts and figures ALLROUNDER 57 C GOLDEN EDITION Distance between tie bars: 57 x 57 mm Clamping force: 2 kn Injection unit (acc. to EUROMAP): 8 www.arburg.com 57 C GOLDEN EDITION Machine dimensions 255
ALLROUNDER 320 C GOLDEN EDITION
Facts and figures ALLROUNDER 32 C GOLDEN EDITION Distance between tie bars: 12.6 x 12.6 (32 x 32 mm) Clamping force: 55 tons Injection unit: 2.3 oz, 3.7 oz www.arburg.com 32 C GOLDEN EDITION Machine dimensions
Test Report: Reference Axle
Test Report: Reference Axle Legislation UNECE Regulation 13.11 to Supplements 10-13, Annex 11, Appendix 3 Test Details Location of Test: Konya Organized Industrial Zone / Selçuklu / Konya / Turkey Date
Facts and figures ALLROUNDER 375 V. Vertical free-space system Clamping force: 500 kn Injection unit (acc. to EUROMAP): 100, 170, 290.
Facts and figures ALLROUNDER 375 V Vertical free-space system Clamping force: 500 kn Injection unit (acc. to EUROMAP): 100, 1, 290 www.arburg.com 375 V Installation dimensions Vertical version 1050 850
Facts and figures ALLROUNDER 1500 T
Facts and figures ALLROUNDER 15 T Table diameter: 59.6 (15 mm) Clamping force: 176, 22, 275, 35 tons : 3.7 oz, 6.1 oz, 8.2 oz, 15.3 oz, 29.1 oz, 45.4 oz www.arburg.com 15 T Machine dimensions up to 22
SOUTH AFRICAN NATIONAL STANDARD
ICS 83.080.20; 83.140.30 ISBN 0-626-14156-7 SANS 12107:2003 SOUTH AFRICAN NATIONAL STANDARD Plastics piping systems Injection-moulded thermoplastics fittings, valves and ancillary equipment Determination
ALLROUNDER 720 A Multi-component
Facts and figures ALLROUNDER 72 A Multi-component Distance between tie bars: 72 x 72 mm Clamping force: 32 kn Injection unit: 8, 13, 21 horizontal 7, 17, 29, 4 vertical www.arburg.com 72 A Multi-component
ALLROUNDER 570 S. Distance between tie bars: x (570 x 570 mm) Clamping force: 176, 220, 242 tons Injection unit: 8.2 oz, 15.3 oz, 29.
Facts and figures ALLROUNDER 57 S Distance between tie bars: 22. x 22. (57 x 57 mm) Clamping force: 176, 22, 22 tons Injection unit: 8.2 oz, 15.3 oz, 29.1 oz www.arburg.com 57 S Machine dimensions 78.7
THE UNITED KINGDOM VEHICLE APPROVAL AUTHORITY
THE UNITED KINGDOM VEHICLE APPROVAL AUTHORITY COMMUNICATION CONCERNING THE GRANTING OF A COMPONENT TYPE-APPROVAL CERTIFICATE IN RESPECT OF A NON-ORIGINAL EXHAUST SYSTEM FOR A TYPE OF MOTORCYCLE PURSUANT
ALLROUNDER 470 S. Distance between tie bars: 470 x 470 mm Clamping force: 800, 1000, 1100 kn Injection unit (acc. to EUROMAP): 170, 290, 400
Facts and figures ALLROUNDER 470 S Distance between tie bars: 470 x 470 mm Clamping force: 800, 1000, 1100 kn Injection unit (acc. to EUROMAP):, 290, 400 www.arburg.com 470 S Machine dimensions 585 330
ALLROUNDER 520 S. Distance between tie bars: 520 x 520 mm Clamping force: 1300, 1500, 1600 kn Injection unit (acc. to EUROMAP): 290, 400, 800
Facts and figures ALLROUNDER 520 S Distance between tie bars: 520 x 520 mm Clamping force: 1300, 1500, 1600 kn Injection unit (acc. to EUROMAP): 290, 400, www.arburg.com 520 S Machine dimensions 580 330
BMW ConnectedDrive Services - Information
BMW ConnectedDrive Services - Information 1. General information BMW Vertriebs GmbH, a company founded pursuant to Austrian law, with its registered seat at Siegfried-Marcus-Strasse 24, 5021, Salzburg,
BUS & TRUCK DRIVER SEATS
BUS & TRUCK DRIVER SEATS S e a t i n g S y s t e m s www.pilot.com.tr ABOUT US Pilot was established in 1963 doing body work for busses. First seat production started in 1967 with driver seats for Mercedes
ALLROUNDER 270 S. Distance between tie bars: x (270 x 270 mm) Clamping force: 28, 38, 44 tons Injection unit: 1.4 oz, 2.3 oz, 3.
Facts and figures ALLROUNDER 27 S Distance between tie bars: 1.63 x 1.63 (27 x 27 mm) Clamping force: 28, 38, 44 tons Injection unit: 1.4 oz, 2.3 oz, 3.7 oz www.arburg.com 27 S Machine dimensions 78.35
ROMI EL 75 ROMI EL 300 PLASTIC INJECTION MOULDING MACHINES ROMI EL SERIES
ROMI EL 75 ROMI EL 300 PLASTIC INJECTION MOULDING MACHINES ROMI EL SERIES ROMI Industrial Complex in Santa Bárbara d Oeste - SP, Brazil INNOVATION + QUALITY Romi: Since 1930 producing high technology.
Cooling systems for rolling stock
Cooling systems for rolling stock Siemens AG, München/ Berlin AKG is a global partner and supplier of cooling technology components and systems. The AKG Group develops and produces worldwide systems for
ALLROUNDER CUBE 2900
Facts and figures ALLROUNDER CUBE 29 Distance between tie bars: 82 x 82 mm Clamping force: 29 kn Injection unit: 4, 8, 13, 21, 32 horizontal 7, 17, 29, 4, 8, 13 moving www.arburg.com CUBE 29 Machine dimensions
YOUR WORK HOLDING PARTNER
1976 2016 YOUR WORK HOLDING PARTNER Technology Development History Clamping Issues? Resolve all your clamping issues with our unique Lenzkes Clamping Tools services. Try our products absolutely free of
Plug & Seal Fast-fit plug Connections for Housings, Pipe Ends and Assemblies. Product Information Special Sealing Products
Plug & Seal Fast-fit plug Connections for Housings, Pipe Ends and Assemblies Product Information Special Sealing Products Simrit, Your Global Technology Specialist for Seals and Vibration Control Simrit,
Review Plastics and Rubber Machinery
Review Plastics and Rubber Machinery Linz, 14./15th June 2018 VDMA Annual Review, Plastics and Rubber Machinery 2017 Review 2015 2016 2017» New Orders: 10 6 18 (Change in %) Domestic Market: -5 7 14 Export
STAMPING MOULDING OVERMOULDING ASSEMBLY MECHATRONIC MACHINES
STAMPING MOULDING OVERMOULDING ASSEMBLY MECHATRONIC MACHINES >>>>>>> interconnect integration Stamped Assembled Loose overmoulded Continuous overmoulded Axon Mechatronics >>>> Your technological partner
THE UNITED KINGDOM VEHICLE APPROVAL AUTHORITY
VCA Headquarters 1 The Eastgate Office Centre Eastgate Road Bristol, BS5 6XX United Kingdom Switchboard: +44 (0) 117 951 5151 Main Fax: +44 (0) 117 952 4103 Email: enquiries@vca.gov.uk Web: www.vca.gov.uk
Facts and figures MULTILIFT V 6
Facts and figures MULTILIFT V 6 www.arburg.com MULTILIFT V 6 Technical data F Stroke X-axis 3) Stroke Z-axis 1) Clamping face fixed mould platen E A K 4) Stroke Y axis 2) D 2) 156 B 4) C 2)4) 123 P 1)
ZVEI Foreign Trade Report
ZVEI Foreign Trade Report Edition February 2019 ZVEI - German Electrical and Electronic Manufacturers Association Electric exports and imports billion 122.3 148.0 106.3 133.9 Exports 157.4 159.9 157.7
Facts and figures ALLROUNDER 275 V. Vertical free-space system Clamping force: 250 kn Injection unit (according to EUROMAP): 70, 100.
Facts and figures ALLROUNDER 275 V Vertical free-space system Clamping force: 250 kn Injection unit (according to EUROMAP):, 100 www.arburg.com 275 V Installation dimensions 900 665 1782 2880 1) 3025 2)
Airworthiness Directive
Airworthiness Directive AD No.: 2016-0165 Issued: 12 August 2016 EASA AD No.: 2016-0165 Note: This Airworthiness Directive (AD) is issued by EASA, acting in accordance with Regulation (EC) 216/2008 on
TOMORROW S SOLUTIONS HANDLED TODAY
MATERIAL HANDLING TOMORROW S SOLUTIONS HANDLED TODAY Delivering dependable and efficient material handling products will become more important than ever as companies seek to gain a competitive edge in
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-28152-6 EN 197-1:2011 SOUTH AFRICAN NATIONAL STANDARD Cement Part 1: Composition, specifications and conformity criteria for common cements This national standard is the identical implementation
Merkel PTFE U-rings. for high level applications
Merkel PTFE U-rings for high level applications Product information Merkel PTFE U-rings Simrit, Your Global Technology Specialist for Seals and Vibration Control Simrit, Your Global Technology Specialist
Stafsjö s ATEX solutions for category 1 D (Zone 20)
Stafsjö s ATEX solutions for category 1 D (Zone 20) Data is only for informational purpose. All specifications are subject to change without notice. 1 2017-02-2 issue 1 ATEX solutions for category 1 D
Low Emission Zones in Germany
Martin Lambrecht Umweltbundesamt (UBA) Federal Environment Agency Germany Section I 3.1 Environment and Transport 1 Outline 1. EU: Air Quality Targets 2. Implementation in Germany 3. Experiences in Berlin
Facts and figures MULTILIFT SELECT 6
Facts and figures MULTILIFT SELECT 6 www.arburg.com MULTILIFT SELECT 6 Technical data Stroke X-axis min. 100 Stroke Z-axis Clamping face, fixed mould platen 190 A D K Stroke Y axis 156 B 2) C 123 P G L
European Metrology Programme for Innovation and Research (EMPIR) Kamal Hossain EURAMET Chairperson
European Metrology Programme for Innovation and Research (EMPIR) Kamal Hossain EURAMET Chairperson 1 Metrology: Science and application of measurement secure measurements and reference data do/underpin
DEUTSCHE NORM July 2004 DIN EN ISO 9038 { Test for sustained combustibility of liquids (ISO 9038 : 2002) English version of DIN EN ISO 9038
DEUTSCHE NORM July 2004 DIN EN ISO 9038 { ICS 13.220.40; 87.040 Test for sustained combustibility of liquids (ISO 9038 : 2002) English version of DIN EN ISO 9038 Prüfung der Weiterbrennbarkeit von Flüssigkeiten
Mechanical. Shaft handling. Pneumatic expansion shafts. Friction and knife shafts. and adapters. Expansion couplings
Pneumatic expansion shafts Mechanical expansion shafts Expansion couplings Expansion chucks and adapters Friction and knife shafts Shaft handling Expansion couplings E X P A N S I O N Pneumatic expansion
ISO/TS TCS Seals. Profile. Seal It Always
ISO/TS 16949 TCS Seals Profile Seal It Always Brief ISO/TS 16949 Manufacturing Plant In Nantou, Taiwan ISO/TS 16949:2009 certificate Latest information available at Publication No. 9801 2011 TCS Seals
Themis Solar: energy and sustainability
Initiative energy solutions made in Germany Solar thermal energy and photovoltaics in Hungary Themis Solar: energy and sustainability Budapest, 20 June 2017 Alfred W. Wettach Executive Partner Themis Solar
DEUTSCHE NORM January 2004 DIN EN {
DEUTSCHE NORM January 2004 DIN EN 13698-1 { ICS 55.180.20 Supersedes DIN 15146-2, November 1986 edition. Pallet production specification Part 1: Construction specification for 800 mm 1200 mm flat wooden
MAINTENANCE OF SMOKE EXTRACTION MOTORS
4413 en - 2010.05 / b MAINTENANCE OF SMOKE EXTRACTION MOTORS Good practice guide Maintenance of smoke extraction motors Good practice guide The Maintenance or Repair of smoke extraction motors maintains
Armaturenwerk Hötensleben GmbH. AWH-Connect
Armaturenwerk Hötensleben GmbH The aseptic Connection for Vessels "A must for clean Vessels " is the aseptic and hygienic connection for your vessels. It was developed for the strict requirements of the
PROPOSAL FOR DRAFT AMENDMENT TO THE REGULATION No. 107
Transmitted by the expert from Poland Informal document No. GRSG-95-23 (95 th GRSG, 21 24 October 2008 agenda item 3(e)) PROPOSAL FOR DRAFT AMENDMENT TO THE REGULATION No. 107 A. PROPOSAL. Paragraph 7.6.1.9.3.
Please find attached a copy of JAR-27 Amendment 6 dated December 2007.
oint Aviation Authorities Postal Address: P.O. Box 3000 2130 KA Hoofddorp Visiting Address: Saturnusstraat 40-44 The Netherlands Tel.: 31 (0)23-5679790 Fax: 31 (0)23 5657731 www.jaa.nl January 2008 JAR-27
STEEL INDUSTRY ELECTRIC ARC FURNACES REFRACTORY CONCEPT SOLUTIONS
STEEL INDUSTRY ELECTRIC ARC FURNACES REFRACTORY CONCEPT SOLUTIONS TOGETHER FOR MORE AT CALDERYS, OUR MISSION IS TO DELIVER VALUE TO OUR CUSTOMERS. We are a world leader in providing refractory solutions
STEEL INDUSTRY STEEL LADLES REFRACTORY CONCEPT SOLUTIONS
STEEL INDUSTRY STEEL LADLES REFRACTORY CONCEPT SOLUTIONS TOGETHER FOR MORE AT CALDERYS, OUR MISSION IS TO DELIVER VALUE TO OUR CUSTOMERS. We are a world leader in providing refractory solutions and services.
Certificate. Standard ISO 9001:2015. Certificate Registr. No /07. Wuppermann Austria GmbH Gußstahlwerkstr Judenburg Austria
Certificate /07 Certificate Holder: Wuppermann GmbH Gußstahlwerkstr. 23 8750 Judenburg Scope: Development, production and sales of pickled, galvanised hot-rolled strip (slitted), cold-rerolled, pickled
Knife gate valve JTV. Data is only for informational purpose. All specifications are subject to change without notice issue 11
Knife gate valve JTV Data is only for informational purpose. All specifications are subject to change without notice. 1 2015-05-21 issue 11 Knife gate valve JTV Stafsjö s knife gate valve JTV is reliable
DEUTSCHE NORM February 2005 DIN EN ISO 1514 { Paints and varnishes Standard panels for testing (ISO 1514 : 2004) English version of DIN EN ISO 1514
DEUTSCHE NORM February 2005 DIN EN ISO 1514 { ICS 87.100 Supersedes September 1997 edition. Paints and varnishes Standard panels for testing (ISO 1514 : 2004) English version of DIN EN ISO 1514 Beschichtungsstoffe
RUBBER & PLASTIC PARTS FOR AUTOMOTIVE & INDUSTRIAL APPLICATIONS. Company profile
RUBBER & PLASTIC PARTS FOR AUTOMOTIVE & INDUSTRIAL APPLICATIONS Company profile MIJU PRESENTATION MIJU GROUP is an Aragonese capital firm that started its business activity in 1960, with the aim of offering
Page 1 of 6. Company: France. fuse links. listed in this. (ISO/IEC The manufacturing.
OVE Austrian Electrotechnical Association Eschenbachgasse 9, 10100 Wien, Austria ZVR: 327279890 DVR: 1055887 Kahlenberger Str. 2A, 1190 Wien, Austriaa T +43 1 370 58 06 F +43 1 370 58 06-199 www.ove.at
giroflex 63 Stoll Giroflex AG
Reduced to the bare essentials but nonetheless special: the giroflex 63 has an appealing architectural style of design. Its architectural lines give the giroflex 63 an air of independence. The ergonomic
Cooling systems for rolling stock
Cooling systems for rolling stock Alstom Transport / Capa Pictures-F.Clément AKG is a global partner and supplier of cooling technology components and systems. The AKG Group develops and produces worldwide