DEUTSCHE NORM January 2004 DIN EN {

Save this PDF as:

Size: px
Start display at page:

Download "DEUTSCHE NORM January 2004 DIN EN {"

Transcription

1 DEUTSCHE NORM January 2004 DIN EN { ICS Supersedes DIN , November 1986 edition. Pallet production specification Part 1: Construction specification for 800 mm 1200 mm flat wooden pallets English version of DIN EN Produktspezifikation für Paletten Teil 1: Herstellung von 800 mm 1200 mm Flachpaletten aus Holz European Standard has the status of a DIN Standard. A comma is used as the decimal marker. National foreword This standard has been prepared by CEN/TC 261 Packaging (Secretariat: France). The responsible German body involved in its preparation was the Normenausschuss Verpackungswesen (Packaging Standards Committee), Technical Committee Paletten. Amendments DIN , November 1986 edition, has been superseded by the specifications of EN Previous editions DIN : , , , , Normen-Download-Beuth-Jungheinrich AG-KdNr LfNr :13 Normenausschuss Bauwesen (NABau) im DIN No part of this standard may be reproduced without the prior permission of DIN Deutsches Institut für Normung e.v., Berlin. Beuth Verlag GmbH, Berlin, Germany, has the exclusive right of sale for German Standards (DIN-Normen). Continued overleaf. Document comprises 25 pages. English price group <_P

2

3 EN July 2003 ICS English version Pallet production specification Part 1: Construction specification for 800 mm 1200 mm flat wooden pallets Spécification de produit pour les palettes Partie 1: Spécification de fabrication des palettes en bois, de dimensions 800 mm 1200 mm Produktspezifikation für Paletten Teil 1: Herstellung von 800 mm 1200 mm Flachpaletten aus Holz Normen-Download-Beuth-Jungheinrich AG-KdNr LfNr :13 This European Standard was approved by CEN on CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Management Centre or to any CEN member. The European Standards exist in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, the Czech Republic, Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, the Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland, and the United Kingdom. ÈÉË European Committee for Standardization Comité Européen de Normalisation Europäisches Komitee für Normung Management Centre: rue de Stassart 36, B-1050 Brussels CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national members. Ref. No. E

4 Page Normen-Download-Beuth-Jungheinrich AG-KdNr LfNr :13

5 Page 3

6 Page 4

7 Page 5

8 Page 6

9 Page 7

10 Page 8

11 Page 9

12 Page 10

13 Page 11

14 Page 12

15 Page 13

16 Page 14

17 Page 15

18 Page 16

19 Page 17

20 Page 18

21 Page 19

22 Page 20

23 Page 21

24 Page 22

25 Page 23

26 Page 24

DEUTSCHE NORM February 2005 DIN EN ISO 1514 { Paints and varnishes Standard panels for testing (ISO 1514 : 2004) English version of DIN EN ISO 1514

DEUTSCHE NORM February 2005 DIN EN ISO 1514 { Paints and varnishes Standard panels for testing (ISO 1514 : 2004) English version of DIN EN ISO 1514 DEUTSCHE NORM February 2005 DIN EN ISO 1514 { ICS 87.100 Supersedes September 1997 edition. Paints and varnishes Standard panels for testing (ISO 1514 : 2004) English version of DIN EN ISO 1514 Beschichtungsstoffe

More information

DEUTSCHE NORM July 2004 DIN EN ISO 9038 { Test for sustained combustibility of liquids (ISO 9038 : 2002) English version of DIN EN ISO 9038

DEUTSCHE NORM July 2004 DIN EN ISO 9038 { Test for sustained combustibility of liquids (ISO 9038 : 2002) English version of DIN EN ISO 9038 DEUTSCHE NORM July 2004 DIN EN ISO 9038 { ICS 13.220.40; 87.040 Test for sustained combustibility of liquids (ISO 9038 : 2002) English version of DIN EN ISO 9038 Prüfung der Weiterbrennbarkeit von Flüssigkeiten

More information

DEUTSCHE NORM June Plastics Symbols and abbreviated terms Part 1: Basic polymers and their special characteristics (ISO : 2001)

DEUTSCHE NORM June Plastics Symbols and abbreviated terms Part 1: Basic polymers and their special characteristics (ISO : 2001) DEUTSCHE NORM June 2002 Plastics Symbols and abbreviated terms Part 1: Basic polymers and their special characteristics (ISO 1043-1 : 2001) English version of DIN EN ISO 1043-1 { EN ISO 1043-1 ICS 01.040.83;

More information

DEUTSCHE NORM October Steels Determination of depth of decarburization (ISO 3887 : 2003) English version of DIN EN ISO 3887

DEUTSCHE NORM October Steels Determination of depth of decarburization (ISO 3887 : 2003) English version of DIN EN ISO 3887 DEUTSCHE NORM October 2003 Steels Determination of depth of decarburization (ISO 3887 : 2003) English version of DIN EN ISO 3887 { EN ISO 3887 ICS 77.040.99 Stahl Bestimmung der Entkohlungstiefe (ISO 3887

More information

DEUTSCHE NORM January Fasteners Electroplated coatings (ISO 4042 : 1999) English version of DIN EN ISO 4042

DEUTSCHE NORM January Fasteners Electroplated coatings (ISO 4042 : 1999) English version of DIN EN ISO 4042 DEUTSCHE NORM January 2001 Fasteners Electroplated coatings (ISO 4042 : 1999) English version of DIN EN ISO 4042 { EN ISO 4042 ICS 21.060.01; 25.220.40 Verbindungselemente Galvanische Überzüge (ISO 4042

More information

DEUTSCHE NORM May 2004 DIN EN ISO 4029 { Hexagon socket set screws with cup point (ISO 4029 : 2003) English version of DIN EN ISO 4029

DEUTSCHE NORM May 2004 DIN EN ISO 4029 { Hexagon socket set screws with cup point (ISO 4029 : 2003) English version of DIN EN ISO 4029 DEUTSCHE NORM May 2004 DIN EN ISO 4029 { ICS 21.060.10 Supersedes DIN 916, December 1980 edition. Hexagon socket set screws with cup point (ISO 4029 : 2003) English version of DIN EN ISO 4029 Gewindestifte

More information

DEUTSCHE NORM March Hexagon head bolts Product grade C (ISO 4016 : 1999) English version of DIN EN ISO 4016

DEUTSCHE NORM March Hexagon head bolts Product grade C (ISO 4016 : 1999) English version of DIN EN ISO 4016 DEUTSCHE NORM March 2001 Hexagon head bolts Product grade C (ISO 4016 : 1999) English version of DIN EN ISO 4016 { EN ISO 4016 ICS 21.060.10 Sechskantschrauben mit Schaft Produktklasse C (ISO 4016 : 1999)

More information

DEUTSCHE NORM July 1998

DEUTSCHE NORM July 1998 DEUTSCHE NORM July 1998 Non-destructive testing of steel forgings Part 3: Ultrasonic testing of ferritic or martensitic steel forgings English version of DIN EN 10228-3 { EN 10228-3 ICS 77.040.20; 77.140.85

More information

Part 1: Specifications for pipes, fittings and the system English version of DIN EN

Part 1: Specifications for pipes, fittings and the system English version of DIN EN DEUTSCHE NORM December 1999 Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure Unplasticized poly(vinyl chloride) (PVC-U) Part 1: Specifications

More information

DEUTSCHE NORM February 2003

DEUTSCHE NORM February 2003 DEUTSCHE NORM February 2003 Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylenediene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)- styrene (ACS) moulding and extrusion

More information

DEUTSCHE NORM DIN EN 10080

DEUTSCHE NORM DIN EN 10080 DEUTSCHE NORM DIN EN 10080 August 2005 { ICS 77.140.15; 77.140.60; 77.140.65 Supersedes DIN V ENV 10080, August 1995 edition, parts of DIN 488-1, September 1984 edition, DIN 488-2, DIN 488-4 and DIN 488-6,

More information

DEUTSCHE NORM June 2002

DEUTSCHE NORM June 2002 DEUTSCHE NORM June 2002 Flanges and their joints Circular flanges for pipes, valves, fittings and accessories Part 1: Steel flanges, PN designated English version of DIN EN 1092-1 { EN 1092-1 ICS 23.040.60

More information

DEUTSCHE NORM October Structural steel equal and unequal leg angles Part 1: Dimensions English version of DIN EN

DEUTSCHE NORM October Structural steel equal and unequal leg angles Part 1: Dimensions English version of DIN EN DEUTSCHE NORM October 1998 Structural steel equal and unequal leg angles Part 1: Dimensions English version of DIN EN 10056-1 { EN 10056-1 ICS 77.140.70 Descriptors: Structural steel, angles, dimensions.

More information

Steel forgings for pressure purposes Part 5: Martensitic, austenitic and austenitic-ferritic stainless steels English version of DIN EN

Steel forgings for pressure purposes Part 5: Martensitic, austenitic and austenitic-ferritic stainless steels English version of DIN EN DEUTSCHE NORM February 2000 Steel forgings for pressure purposes Part 5: Martensitic, austenitic and austenitic-ferritic stainless steels English version of DIN EN 10222-5 { EN 10222-5 ICS 23.020,30; 77.140.80;

More information

SOUTH AFRICAN NATIONAL STANDARD

SOUTH AFRICAN NATIONAL STANDARD ISBN 978-0-626-31521-4 EN 300:2006 SOUTH AFRICAN NATIONAL STANDARD Oriented Strand Boards (OSB) Definitions, classification and specifications This national standard is the identical implementation of

More information

SOUTH AFRICAN NATIONAL STANDARD

SOUTH AFRICAN NATIONAL STANDARD ISBN 978-0-626-30207-8 SOUTH AFRICAN NATIONAL STANDARD Chemicals used for treatment of water intended for human consumption Chlorine This national standard is the identical implementation of and is adopted

More information

Steel wire ropes - Terminations for steel wire ropes Safety - Metal and resin socketing

Steel wire ropes - Terminations for steel wire ropes Safety - Metal and resin socketing Draft SI part 34 34 October 2011 2011 ICS CODE ###### Steel wire ropes Terminations for steel wire ropes Safety Metal and resin socketing The Standards Institution of Israel 24/10/11 #### wwwsiiorgil 036412762

More information

DEUTSCHE NORM June 2006 DIN EN { ICS Supersedes DIN EN : See start of validity

DEUTSCHE NORM June 2006 DIN EN { ICS Supersedes DIN EN : See start of validity DEUTSCHE NORM June 2006 DIN EN 14399-6 { ICS 21.060.30 Supersedes DIN EN 14399-6:2005-06 See start of validity High-strength structural bolting assemblies for preloading Part 6: Plain chamfered washers

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 12712:2000 Plastics jerricans - Jerricans with a nominal capacity of 20 l to 60 l for optimal utilisation of pallet sizes 800 x 1200, 1000 x 1200 and 1140 x 1140 mm Plastics jerricans

More information

Provläsningsexemplar / Preview

Provläsningsexemplar / Preview Provläsningsexemplar / Preview EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM EN 14975:2006+A1 July 2010 ICS 91.060.30 Supersedes EN 14975:2006 English Version Loft ladders - Requirements, marking

More information

WATER-TUBE BOILERS AND AUXILIARY

WATER-TUBE BOILERS AND AUXILIARY IRISH STANDARD I.S. EN 12952-12:2003 ICS 13.060.25 27.040 WATER-TUBE BOILERS AND AUXILIARY National Standards Authority of Ireland Dublin 9 Ireland Tel: (01) 807 3800 Tel: (01) 807 3838 INSTALLATIONS -

More information

SOUTH AFRICAN NATIONAL STANDARD

SOUTH AFRICAN NATIONAL STANDARD ISBN 978-0-626-26065-1 Edition 1 EN 12281:2002 Edition 2 SOUTH AFRICAN NATIONAL STANDARD Printing and business paper Requirements for copy paper for dry toner imaging processes This national standard is

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 12591:2000 Bitumen and bituminous binders - Specifications for paving grade bitumens Bitumen and bituminous binders - Specifications for paving grade bitumens EESTI STANDARDIKESKUS

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 14067-3:2003 Railway applications - Aerodynamics - Part 3: Aerodynamics in tunnels Railway applications - Aerodynamics - Part 3: Aerodynamics in tunnels EESTI STANDARDIKESKUS EESTI

More information

Eurocode 2 Design of concrete structures

Eurocode 2 Design of concrete structures BRITISH STANDARD BS EN 1992-3:2006 Eurocode 2 Design of concrete structures Part 3: Liquid retaining and containment structures The European Standard EN 1992-3:2006 has the status of a British Standard

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 12514-1:2000 Installations for oil supply systems for oil burners - Part 1: Safety requirements and tests - Parts, oil feed pumps, control and safety devices, supply tanks Installations

More information

Eurocode 8: Design of structures for earthquake resistance

Eurocode 8: Design of structures for earthquake resistance BRITISH STANDARD BS EN 1998-4:2006 Eurocode 8: Design of structures for earthquake resistance Part 4: Silos, tanks and pipelines The European Standard EN 1998-4:2006 has the status of a British Standard

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN ISO 6245:2003 Naftasaadused. Tuha määramine Petroleum products - Determination of ash EESTI STANDARDIKESKUS EESTI STANDARDI EESSÕNA NATIONAL FOREWORD Käesolev Eesti standard EVS-EN

More information

SOUTH AFRICAN NATIONAL STANDARD

SOUTH AFRICAN NATIONAL STANDARD ISBN 978-0-626-28107-6 EN 1008:2002 SOUTH AFRICAN NATIONAL STANDARD Mixing water for concrete Specification for sampling, testing and assessing the suitability of water, including water recovered from

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 15469:2007 Petroleum products - Test method for free water in liquefied petroleum gas by visual inspection Petroleum products - Test method for free water in liquefied petroleum gas

More information

SOUTH AFRICAN NATIONAL STANDARD

SOUTH AFRICAN NATIONAL STANDARD ISBN 978-0-626-29507-3 EN 413-1:2011 SOUTH AFRICAN NATIONAL STANDARD Masonry cement Part 1: Composition, specifications and conformity criteria This national standard is the identical implementation of

More information

COLD ROLLED STEEL SECTIONS -

COLD ROLLED STEEL SECTIONS - STANDARD I.S. EN 10162:2003 ICS 77.140.70 National Standards Authority of Ireland Dublin 9 Ireland COLD ROLLED STEEL SECTIONS - Tel: (01) 807 3800 Fax: (01) 807 3838 TECHNICAL DELIVERY CONDITIONS - DIMENSIONAL

More information

SOUTH AFRICAN NATIONAL STANDARD

SOUTH AFRICAN NATIONAL STANDARD ISBN 978-0-626-32581-7 SOUTH AFRICAN NATIONAL STANDARD Gravity drainage systems inside buildings Part 3: Roof drainage, layout and calculation This national standard is the identical implementation of,

More information

SOUTH AFRICAN NATIONAL STANDARD

SOUTH AFRICAN NATIONAL STANDARD ISBN 978-0-626-28152-6 EN 197-1:2011 SOUTH AFRICAN NATIONAL STANDARD Cement Part 1: Composition, specifications and conformity criteria for common cements This national standard is the identical implementation

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 12900:2005 Refrigerant compressors - Rating conditions, tolerances and presentation of manufacturer's performance data Refrigerant compressors - Rating conditions, tolerances and

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 805:2000 Water supply - Requirements for systems and components outside buildings Water supply - Requirements for systems and components outside buildings EESTI STANDARDIKESKUS EESTI

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 12723:2000 Liquid pumps - General terms for pumps and installations - Definitions, quantities, letter symbols and units Liquid pumps - General terms for pumps and installations -

More information

RESILIENT AND LAMINATE FLOOR COVERINGS - CASTOR CHAIR TEST IRISH STANDARD I.S. EN 425:2002. Price Code. Údarás um Chaighdeáin Náisiúnta na héireann

RESILIENT AND LAMINATE FLOOR COVERINGS - CASTOR CHAIR TEST IRISH STANDARD I.S. EN 425:2002. Price Code. Údarás um Chaighdeáin Náisiúnta na héireann IRISH STANDARD I.S. EN 425:2002 ICS 97.150 National Standards Authority of Ireland Dublin 9 Ireland Tel: (01) 807 3800 Tel: (01) 807 3838 RESILIENT AND LAMINATE FLOOR COVERINGS - CASTOR CHAIR TEST NSAI

More information

Eurocode 3 Design of steel structures

Eurocode 3 Design of steel structures BRITISH STANDARD BS EN 1993-3-2:2006 Eurocode 3 Design of steel structures Part 3-2: Towers, masts and chimneys Chimneys ICS 91.010.30; 91.060.40; 91.080.10 National foreword This British Standard is the

More information

Eurocode 3 Design of steel structures

Eurocode 3 Design of steel structures BRITISH STANDARD BS EN 1993-1-5:2006 Incorporating corrigendum April 2009 Eurocode 3 Design of steel structures Part 1-5: Plated structural elements ICS 91.010.30; 91.080.10 National foreword This British

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 10246-8:2000 Non-destructive testing of steel tubes - Part 8: Automatic ultrasonic testing of the weld seam of electric welded steel tubes for the detection of longitudinal imperfections

More information

Eurocode 1 Actions on structures

Eurocode 1 Actions on structures BRITISH STANDARD Eurocode 1 Actions on structures BS EN 1991-1-3:2003 Incorporating corrigenda December 2004 and March 2009 Part 1-3: General actions Snow loads ICS 91.010.30 National foreword This British

More information

Eurocode 3 Design of steel structures

Eurocode 3 Design of steel structures BRITISH STANDARD BS EN 1993-2:2006 Incorporating corrigendum July 2009 Eurocode 3 Design of steel structures Part 2: Steel bridges ICS 91.010.30; 91.080.10; 93.040 National foreword This British Standard

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 12255-6:2002 Wastewater treatment plants - Part 6: Activated sludge processes Wastewater treatment plants - Part 6: Activated sludge processes EESTI STANDARDIKESKUS EESTI STANDARDI

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 14432:2006 Tanks for the transport of dangerous goods - Tank equipment for the transport of liquid chemicals - Product discharge and air inlet valves Tanks for the transport of dangerous

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 867-4:2001 Non-biological systems for use in sterilizers - Part 4: Specification for indicators as an alternative to the Bowie and Dick test for the detection of steam penetration

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 12606-1:2007 Bitumen and bituminous binders - Determination of the paraffin wax content - Part 1: Method by distillation Bitumen and bituminous binders - Determination of the paraffin

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 840-1:2004 Teisaldatavad heitmekonteinerid. Osa 1: Kaherattalised konteinerid mahuga kuni 400 l, tõstmiseks kammtõsteseadistega, mõõtmed ja konstrueerimine Mobile waste containers

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 12642:2006 Securing of cargo on road vehicles - Body structure of commercial vehicles - Minimum requirements Securing of cargo on road vehicles - Body structure of commercial vehicles

More information

Gasflaskor Fyllningsförhållanden för batterifordon för acetylen

Gasflaskor Fyllningsförhållanden för batterifordon för acetylen SVENSK STANDARD SS-EN 13720 Fastställd 2003-03-28 Utgåva 1 Gasflaskor Fyllningsförhållanden för batterifordon för acetylen Transportable gas cylinders Filling conditions for acetylene battery vehicles

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN ISO 11446:2004 Passenger cars and light commercial vehicles with 12 V systems - 13-pole connectors between towing vehicles and trailers - Dimensions and contact allocation Passenger

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 12122:2005 Chemicals used for treatment of water intended for human consumption - Ammonium solution Chemicals used for treatment of water intended for human consumption - Ammonia

More information

SVENSK STANDARD SS-EN 1949/A1:2005. Gasutrustningar Gasolanläggningar i husvagnar och i andra vägfordon avsedda för boende Installationsanvisningar

SVENSK STANDARD SS-EN 1949/A1:2005. Gasutrustningar Gasolanläggningar i husvagnar och i andra vägfordon avsedda för boende Installationsanvisningar SVENSK STANDARD SS-EN 1949/A1:2005 Fastställd 2005-07-28 Utgåva 1 Gasutrustningar Gasolanläggningar i husvagnar och i andra vägfordon avsedda för boende Installationsanvisningar Specification for the installation

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 1092-4:2002 Äärikud ja nende ühendused. Ringäärikud torudele, ventiilidele, ühendusdetailidele ja abiseadmetele, PN määratud. Osa 4: Alumiiniumsulamist äärikud Flanges and their joints

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 15491:2007 Ethanol as a blending component for petrol - Determination of total acidity - Colour indicator titration method Ethanol as a blending component for petrol - Determination

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 284:2006 Transpordipakendid. Klassi C transpordipakendid. Mõõtmed ja üldnõuded Swap bodies - Non-stackable swap bodies of class C - Dimensions and general requirements EESTI STANDARDIKESKUS

More information

Skyddshandskar mot kemikalier och mikroorganismer

Skyddshandskar mot kemikalier och mikroorganismer SVENSK STANDARD SS-EN 374-1:2004 Fastställd 2004-01-23 Utgåva 2 Skyddshandskar mot kemikalier och mikroorganismer Del 1: Terminologi och fordringar på prestanda Protective gloves against chemicals and

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 867-5:2002 Non-biological systems for use in sterilizers - Part 5: Specification for indicator systems and process challenge devices for use in performance testing for small sterilizers

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 1772:2000 Surface active agents - Determination of wetting power by immersion Surface active agents - Determination of wetting power by immersion (ISO 022:10, modified) EESTI STANDARDIKESKUS

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 12173:2005 Chemicals used for treatment of water intended for human consumption - Sodium fluoride Chemicals used for treatment of water intended for human consumption - Sodium fluoride

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 12934:2000 Feather and down - Composition labelling of processed feathers and down for use as sole filling Feather and down - Composition labelling of processed feathers and down

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 12120:2005 Chemicals used for treatment of water intended for human consumption - Sodium hydrogen sulfite Chemicals used for treatment of water intended for human consumption - Sodium

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 15520:2007 Thermal spraying - Recommendations for constructional design of components with thermally sprayed coatings Thermal spraying - Recommendations for constructional design

More information

SVENSK STANDARD SS-EN Armering Specifikation för textila glasrovings Del 1: Beteckning

SVENSK STANDARD SS-EN Armering Specifikation för textila glasrovings Del 1: Beteckning SVENSK STANDARD SS-EN 14020-1 Fastställd 2002-12-20 Utgåva 1 Armering Specifikation för textila glasrovings Del 1: Beteckning Reinforcements Specification for textile glass rovings Part 1: Designation

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 1272:2002 Devices to prevent pollution by backflow of potable water - Controllable backflow preventer with reduced pressure zone - Family B - Type A Devices to prevent pollution by

More information

ILNAS-EN 15663:2017. Railway applications - Vehicle reference masses. Bahnanwendungen - Fahrzeugreferenzmassen

ILNAS-EN 15663:2017. Railway applications - Vehicle reference masses. Bahnanwendungen - Fahrzeugreferenzmassen Railway applications - Vehicle reference masses Bahnanwendungen - Fahrzeugreferenzmassen Applications ferroviaires - Masses de référence des véhicules 07/2017 National Foreword This European Standard EN

More information

Eurocode 3 Design of steel structures

Eurocode 3 Design of steel structures BRITISH STANDARD BS EN 1993-3-1:2006 Incorporating corrigendum July 2009 Eurocode 3 Design of steel structures Part 3-1: Towers, masts and chimneys Towers and masts ICS 91.010.30; 91.080.10 National foreword

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 1983:2006 Tööstuslikud ventiilid. Terasest kuulklapid Industrial valves - Steel ball valves EESTI STANDARDIKESKUS EESTI STANDARDI EESSÕNA NATIONAL FOREWORD Käesolev Eesti standard

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 15519:2007 Paper and board intended to come into contact with foodstuffs - Preparation of an organic solvent extract Paper and board intended to come into contact with foodstuffs

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 13452-1:2003 Railway applications - Braking - Mass transit brake systems - Part 1: Performance requirements Railway applications - Braking - Mass transit brake systems - Part 1: Performance

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 14367:2005 Backflow preventer with different non controllable pressure zones - Family C - Type A Non controllable backflow preventer with different pressure zones - Family C, type

More information

Plastics Polyoxymethylene (POM) moulding and extrusion materials Part 1: Designation system and basis for specifications (ISO :2004)

Plastics Polyoxymethylene (POM) moulding and extrusion materials Part 1: Designation system and basis for specifications (ISO :2004) SVENSK STANDARD SS-EN ISO 9988-1:2006 Fastställd 2006-04-12 Utgåva 1 Plast Sprutmassor av polyoxymetylen (POM) Del 1: Beteckningssystem och specifikationsgrund (ISO 9988-1:2004) Plastics Polyoxymethylene

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 14895:2006 Bitumen and bituminous binders - Stabilisation of binder from bituminous emulsions or from cut-back and fluxed bituminous binders Bitumen and bituminous binders - Stabilisation

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 14620-3:2006 Design and manufacture of site built, vertical, cylindrical, flat-bottomed steel tanks for the storage of refrigerated, liquefied gases with operating temperatures between

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 303-4:2001 Heating boilers. Part 4: Heating boilers with forced draught burners - Special requirements for boilers with forced draught oil burners with outputs up to 70 kw and a maximum

More information

Järnvägar Spår Provningsmetoder för befästningssystem Del 5: Bestämning av elektriskt motstånd

Järnvägar Spår Provningsmetoder för befästningssystem Del 5: Bestämning av elektriskt motstånd SVENSK STANDARD SS-EN 13146-5 Fastställd 2002-11-29 Utgåva 1 Järnvägar Spår Provningsmetoder för befästningssystem Del 5: Bestämning av elektriskt motstånd Railway applications Track Test methods for fastening

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 12592:2007 Bitumen and bituminous binders - Determination of solubility Bitumen and bituminous binders - Determination of solubility EESTI STANDARDIKESKUS EESTI STANDARDI EESSÕNA

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 10219-2:2006 Külmsurvevormitud keevitatud konstruktsiooni-õõnesprofiilid mittelegeerja peeneteraterastest. Osa 2: Tolerantsid, mõõtmed ja profiili omadused Cold formed welded structural

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 13594:2002 Kaitsekindad professionaalsete mootorratturitele. Nõuded ja katsemeetodid Protective gloves for professional motorcycle riders - Requirements and test methods EESTI STANDARDIKESKUS

More information

Eurocode 3 Design of steel structures

Eurocode 3 Design of steel structures BRITISH STANDARD BS EN 1993-5:2007 Incorporating corrigendum May 2009 Eurocode 3 Design of steel structures Part 5: Piling ICS 91.010.30; 91.080.10 National foreword This British Standard is the UK implementation

More information

Utrustning för hjulsport Inlines Säkerhetskrav och provningsmetoder. Roller sports equipment Inline-skates Safety requirements and test methods

Utrustning för hjulsport Inlines Säkerhetskrav och provningsmetoder. Roller sports equipment Inline-skates Safety requirements and test methods SVENSK STANDARD SS-EN 13843 Fastställd 2003-02-21 Utgåva 1 Utrustning för hjulsport Inlines Säkerhetskrav och provningsmetoder Roller sports equipment Inline-skates Safety requirements and test methods

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 12674-3:2004 Roll containers - Part 3: Test methods Roll containers - Part 3: Test methods EESTI STANDARDIKESKUS EESTI STANDARDI EESSÕNA NATIONAL FOREWORD Käesolev Eesti standard

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 14264:2003 Derivatives from coal pyrolysis - Coal tar and pitch based binders and related products: impregnating pitch - Characteristics and test methods Derivatives from coal pyrolysis

More information

Laboratorieglas Byretter (ISO 385:2005)

Laboratorieglas Byretter (ISO 385:2005) SVENSK STANDARD SS-EN ISO 385:2005 Fastställd 2005-07-11 Utgåva 1 Laboratorieglas Byretter (ISO 385:2005) Laboratory glassware Burettes (ISO 385:2005) ICS 17.060; 71.040.20 Språk: engelska Publicerad:

More information

Provläsningsexemplar / Preview SVENSK STANDARD SS-EN 14667:2006 Fastställd 2006-12-06 Utgåva 1 Surface active agents Determination of low boiling solvents in liquid formulations Gas chromatographic method

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 15020:2006 Raudteealased rakendused. Pukseerseadmed. Toimimisnõuded, liidese erigeomeetria ja katsemeetodid Railway applications - Rescue coupler - Performance requirements, specific

More information

Continuously hot-rolled strip and plate/sheet cut from wide strip of nonalloy and alloy steels - Tolerances on dimensions and shape

Continuously hot-rolled strip and plate/sheet cut from wide strip of nonalloy and alloy steels - Tolerances on dimensions and shape Irish Standard Continuously hot-rolled strip and plate/sheet cut from wide strip of nonalloy and alloy steels - Tolerances on dimensions and shape NSAI 2010 No copying without NSAI permission except as

More information

INDUSTRIAL VALVES - ISOLATING VALVES FOR LNG - SPECIFICATION FOR SUITABILITY AND APPROPRIATE VERIFICATION TESTS IRISH STANDARD I.S.

INDUSTRIAL VALVES - ISOLATING VALVES FOR LNG - SPECIFICATION FOR SUITABILITY AND APPROPRIATE VERIFICATION TESTS IRISH STANDARD I.S. IRISH STANDARD I.S. EN 12567:2000 ICS 23.060.01 National Standards Authority of Ireland Dublin 9 Ireland INDUSTRIAL VALVES - ISOLATING VALVES Tel: (01) 807 3800 Tel: (01) 807 3838 FOR LNG - SPECIFICATION

More information

Del 8: Krav på skyddsanordningar mot skadligt tryck. Shell boilers Part 8: Requirements for safeguards against excessive pressure

Del 8: Krav på skyddsanordningar mot skadligt tryck. Shell boilers Part 8: Requirements for safeguards against excessive pressure SVENSK STANDARD SS-EN 12953-8 Fastställd 2001-12-07 Utgåva 1 Eldrörspannor Del 8: Krav på skyddsanordningar mot skadligt tryck Shell boilers Part 8: Requirements for safeguards against excessive pressure

More information

Aerospace series O-rings, in fluorosilicone rubber (FVMQ) Technical specification

Aerospace series O-rings, in fluorosilicone rubber (FVMQ) Technical specification SVENSK STANDARD SS-EN 3747 Fastställd 2003-01-31 Utgåva 1 Aerospace series O-rings, in fluorosilicone rubber (FVMQ) Technical specification ICS 49.025.40 Språk: engelska Publicerad: mars 2003 Copyright

More information

Flödesscheman för processanläggningar Generella regler (ISO 10628:1997) Flow diagrams for process plants General rules (ISO 10628:1997)

Flödesscheman för processanläggningar Generella regler (ISO 10628:1997) Flow diagrams for process plants General rules (ISO 10628:1997) SVENSK STANDARD SS-EN ISO 10628 Fastställd 2003-04-04 Utgåva 1 Flödesscheman för processanläggningar Generella regler (ISO 10628:1997) Flow diagrams for process plants General rules (ISO 10628:1997) ICS

More information

SVENSK STANDARD SS-EN

SVENSK STANDARD SS-EN SVENSK STANDARD SS-EN 13880-4 Fastställd 2003-07-11 Utgåva 1 Vägmaterial Varmapplicerade fogmassor för vägar och flygfält Del 4: Provningsmetod för bestämning av stabilitet för värmning, förändring i penetrationsvärde

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 50272-3:2003 Safety requirements for secondary batteries and battery installations - Part 3: Traction batteries Safety requirements for secondary batteries and battery installations

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 15490:2007 Ethanol as a blending component for petrol - Determination of phe Ethanol as a blending component for petrol - Determination of phe EESTI STANDARDIKESKUS EESTI STANDARDI

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 14832:2005 Petroleum and related products - Determination of the oxidation stability and corrosivity of fire-resistant phosphate ester fluids Petroleum and related products - Determination

More information

SVENSK STANDARD SS-EN ISO Gasflaskor Parallella gängor för anslutning av ventil till gasflaska Del 1: Specifikation (ISO :2001)

SVENSK STANDARD SS-EN ISO Gasflaskor Parallella gängor för anslutning av ventil till gasflaska Del 1: Specifikation (ISO :2001) SVENSK STANDARD SS-EN ISO 15245-1 Fastställd 2001-12-07 Utgåva 1 Gasflaskor Parallella gängor för anslutning av ventil till gasflaska Del 1: Specifikation (ISO 15245-1:2001) Gas cylinders Parallel threads

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 12309-2:2000 Gaasiküttega absorptsiooni ning absorptsiooni kliima- ja/või soojuspumbaseadmed, mille kasulik soojuskoormus ei ületa 70 kw. Osa 2: Energia ratsionaalne kasutamine Gas-fired

More information

SVENSK STANDARD SS-EN 14263:2004. Derivat från kolpyrolys Tjära och beckbaserade bindemedel och relaterade produkter: Kolbindningsbeck

SVENSK STANDARD SS-EN 14263:2004. Derivat från kolpyrolys Tjära och beckbaserade bindemedel och relaterade produkter: Kolbindningsbeck SVENSK STANDARD SS-EN 14263:2004 Fastställd 2004-10-22 Utgåva 1 Derivat från kolpyrolys Tjära och beckbaserade bindemedel och relaterade produkter: Kolbindningsbeck Egenskaper och testmetoder Derivatives

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 13535:2001 Fertilizers and liming materials - Classification Fertilizers and liming materials - Classification EESTI STANDARDIKESKUS EESTI STANDARDI EESSÕNA NATIONAL FOREWORD Käesolev

More information

SOUTH AFRICAN NATIONAL STANDARD

SOUTH AFRICAN NATIONAL STANDARD ICS 83.080.20; 83.140.30 ISBN 0-626-14156-7 SANS 12107:2003 SOUTH AFRICAN NATIONAL STANDARD Plastics piping systems Injection-moulded thermoplastics fittings, valves and ancillary equipment Determination

More information