CERTIFICATE. WIKA Alexander Wiegand SE & Co. KG. with the organizational units/sites as listed in the annex
|
|
|
- Alvin Neal
- 6 years ago
- Views:
Transcription
1 CERTIFICATE This is to certify that with the organizational units/sites as listed in the annex has implemented and maintains a Quality Management System. : Development, production, calibration and sale of pressure and temperature measuring instruments and controllers, level measuring instruments, components for refrigeration and airconditioning, flow and Through an audit, documented in a report, it was verified that the management system fulfills the requirements of the following standard: ISO 9001 : 2008 Certificate registration no. Date of revision Valid from Valid until Date of certification QM DQS GmbH Frank Graichen Managing Director Accredited Body: DQS GmbH, August-Schanz-Straße 21, Frankfurt am Main, 1 / 7
2 WIKA Argentina S.A. General Lavalle 3568, Villa Martelli B 1603 AUH Buenos Aires Argentina Production, sale, service, repair and and flow measuring instruments and equipment WIKA Australia Pty Ltd Unit K, South Street Rydalmere NSW 2116 Australia Production, sale, service, repair and calibration of pressure, temperature, flow and level measuring instruments WIKA Australia Pty Ltd Echuca Site 59 McMillian Road Echuca Vic 3564 Australia Production, sale, service, repair and calibration of pressure, temperature, flow and level measuring instruments WIKA DO BRASIL Indústria e Comércio Ltda. Av. Ursula Wiegand, Iperó - SP Brazil Development, production, sale and servicing of pressure, temperature, level, flow and force (sale) measuring instruments with calibration services for pressure, temperature and length measuring instruments WIKA Instruments Ltd Parsons Road Edmonton, Alberta T6N 1C8 Canada Development, production, calibration, repair, sale, installation and field service support of temperature measuring instruments and related equipment. Assembly, calibration, repair, sale, installation and field service support of pressure measuring instruments and related equipment with the above-mentioned certificate. 2 / 7
3 Manometer AG Industriestraße Hitzkirch Switzerland Development, production and sale of pressure and temperature measuring instruments Feinwerktechnik Wiegand AG Industriestraße Hitzkirch Switzerland Development, production and sale of precision components Refco Manufacturing Ltd. Industriestraße Hitzkirch Switzerland Development, production and sale of refrigeration and air-conditioning service products and components WIKA Instrumentation (Suzhou) Co., Ltd. 81, Ta Yuan Road, SND Suzhou China Production of pressure and temperature measuring instruments Störk Mess- und Regeltechnik GmbH Jacobstrasse Dolle Development, production and sale of pressure and temperature measuring instruments tecsis GmbH Carl-Legien-Straße Offenbach Development, production, calibration and sale of systems of force, pressure and temperature measurement with the above-mentioned certificate. 3 / 7
4 KSR Kuebler Niveau-Messtechnik AG Heinrich-Kübler-Platz Zwingenberg Development, production and sale of level measuring instruments for the trademarks KSR-Kuebler, Phoenix and Vaihinger Instrumentos WIKA, S.A. C/Josep Carner, Sabadell (Barcelona) Spain Design, assembly, sale, service, repair and instruments, flow components and DH KUBLER SAS Immeuble Wika 38 Avenue du Gros Chêne HERBLAY France Development, assembly, sale, service, repair and calibration of high-end mechanic and electronic pressure calibration instruments and. Production of sensors for level measuring instruments WIKA Instruments s.a.r.l. Immeuble Wika 38 Avenue du Gros Chêne HERBLAY France Design, assembly, sale, service, repair and instruments, flow components and TC Fluid Control A division of WIKA Instruments Ltd. Unit 4 The Interchange Wested Lane Kent BR8 8TE Swanley United Kingdom Design, production, assembly, sale, repair and calibration of mechanical and electronic level instrumentation and manufacture of thermowells with the above-mentioned certificate. 4 / 7
5 WIKA Calibration Technology A division of WIKA Instruments Ltd. 10 Huntsman Drive Irlam, Greater Manchester M445EG United Kingdom Development, production, sale, calibration and service of calibration instruments for the measurement and control of pressure, temperature and electrical parameters for the trademarks DH-Budenberg and WIKA. Provision of training on pressure calibration products WIKA Instruments Ltd. 4 Gatton Park Business Centre Wells Place Merstham, Redhill RH1 3LG United Kingdom Design, assembly, sale, service, repair and instruments, flow components and WIKA Instruments India Pvt. Ltd. Head Office Plot No. 40 to 43 & 47 to 52, 55 & 56, GAT No High Cliff Industrial Estate Village- Kesnand Wagholi Pune India Production, servicing, calibration and sale of pressure, temperature, level and flow measuring instruments. Application engineering of related parts and. Manufacturing of turned parts WIKA Italia Srl & C. Sas Via Marconi Arese (Milano) Italy Design, production, sale, service, repair and instruments, flow measuring components and Gayesco Europe S.r.l. & C.S.a.s. Sede Operativa Via Giuseppe Borghisani, Pieve S. Giacomo (CR) Italy Design, production, sale and field-service of primary elements for temperature measuring instruments with the above-mentioned certificate. 5 / 7
6 EUROMISURE S.a.s. di Wika Italia S.r.l. Via Giuseppe Borghisani, Pieve S. Giacomo (CR) Italy Design, production and sale of primary elements for flow measuring instruments. Design and production of the mechanical structure of undulators and insertion devices for light sources WIKA Korea Ltd. 39 Gajangsaneopseo-ro Osan-si Gyeonggi-do Republic of Korea Design, development, production and sale of pressure and temperature measuring instruments. Sale of level instruments, flow components, SF6 gas analyzer and calibration equipment WIKA Benelux Industrial Estate De Berk Newtonweg WX ECHT Netherlands Assembly, sale, service, repair and calibration of pressure, temperature, level instruments, flow components and WIKA Instruments Ltd Unit 7, 49 Sainsbury Road St Lukes Auckland - New Zealand Assembly, sale, service, repair and calibration of pressure, temperature and level measuring instruments WIKA Polska spółka z ograniczoną odpowiedzialnością sp.k. Łęgska 29/ Włocławek Poland Development, production and sale of pressure and temperature measuring instruments with the above-mentioned certificate. 6 / 7
7 WIKA Polska spółka z ograniczoną odpowiedzialnością SGF sp.k. Ul. Kawka Włocławek Poland Production and sale of components, pressure measuring instruments and Wika Instrumentation PTE LTD 13 Kian Teck Crescent Singapore Singapore Sale, procurement, production, stockholding, servicing and calibration of pressure, temperature and level measuring instruments, flow components and Mensor, Limited Partnership 201 Barnes Drive San Marcos, Texas, United States of America Development, production and sale of instruments of high quality for the measuring and control of pressure WIKA Instrument, LP 1000 Wiegand Boulevard Lawrenceville, GA United States of America Development, production, sale and servicing of pressure and temperature measuring instruments and for the trade marks WIKA and 3D Wika Instruments (Pty) Ltd Chilvers Street, Denver 2094 Johannesburg South Africa Import, production, calibration and sale of pressure, temperature and level measuring instruments and related products with the above-mentioned certificate. 7 / 7
CERTIFICATE. WIKA Alexander Wiegand SE & Co. KG. with the organizational units/sites as listed in the annex
CERTIFICATE This is to certify that with the organizational units/sites as listed in the annex has implemented and maintains a Quality Management System. : Development, production, calibration and sale
CERTIFICATE. DQS Holding GmbH has issued an IQNet recognized certificate that the organization. WIKA Alexander Wiegand SE & Co. KG
CERTIFICATE DQS Holding GmbH has issued an IQNet recognized certificate that the organization with the organizational units/sites as listed in the annex has implemented and maintains a Quality Management
GERTIFICATE. tl.,(" tru(,h. ISO 9001 i 2015 LENZE SE. ( DAKKS Deutsche Akkreditierungsstelle D-ZM t5. DQS GmbH. This is to certify that
GERTIFICATE This is to certify that with the organizational units/sites as listed in the annex has implemented and maintains a Quality Management System : Design, production, sales and service of electronic
CERTIFICATE. Continental Automotive Group. with the organizational units/sites as listed in the annex
CERTIFICATE This is to certify that with the organizational units/sites as listed in the annex has implemented and maintains an Energy Management System. : Development, design, production, testing and
CERTIFICATE. Through an audit, documented in a report, it was verified that the management system fulfills the requirements of the following standard:
CERTIFICATE This is to certify that with the organizational units/sites as listed in the annex has implemented and maintains an Energy Management System. : parts, strainers, cylinderhead- and oil pan semi
CERTIFICATE. with the organizational units/sites as listed in the annex. has implemented and maintains a Quality and Environmental Management System.
CERTIFICATE This is to certify that Kennedyplatz 1 with the organizational units/sites as listed in the annex has implemented and maintains a Quality and Environmental Management System. Scope: General
CERTIFICATE. with the organizational units/sites as listed in the annex
CERTIFICATE This is to certify that DURA Holding GmbH with the organizational units/sites as listed in the annex has implemented and maintains an Energy Management System. Scope: Design, Development, Engineering,
CERTIFICATE. DQS Holding GmbH has issued an IQNet recognized certificate that the organization. ebm-papst Mulfingen GmbH & Co. KG
CERTIFICATE DQS Holding GmbH has issued an IQNet recognized certificate that the organization with the organizational units/sites as listed in the annex has implemented and maintains a Quality Management
CERTIFICATE. Dura Automotive Systems Group. with the organizational units/sites as listed in the annex
CERTIFICATE This is to certify that with the organizational units/sites as listed in the annex has implemented and maintains an Environmental Management System. : Design, Development, Engineering, Marketing,
CERTIFICATE. Dura Automotive Systems Group. with the organizational units/sites as listed in the annex
CERTIFICATE This is to certify that with the organizational units/sites as listed in the annex has implemented and maintains an Energy Management System. : Design, development, engineering, marketing,
You ll find many Tsubaki products being
You ll find many Tsubaki products being There are many processes involved in making a motor vehicle. You ll find Tsubaki products in all of these processes, from conveying vehicle bodies from the stockyard,
CERTIFICATE. IQNet and DQS GmbH Deutsche Gesellschaft zur Zertifizierung von Managementsystemen hereby certify that the company
CERTIFICATE IQNet and DQS GmbH Deutsche Gesellschaft zur Zertifizierung von Managementsystemen hereby certify that the company with the organizational units/sites as listed in the annex has implemented
DOUBLE OCTOMILL TM PRODUCT RANGE
DOUBLE OCTOMILL TM PRODUCT RANGE Double Octomill insert selection and cutting data recommendations, see page 6. complete insert programme, see page 7. Tool angles: Jo = -11q Jp = - 8q Jf = - 8q Pitch
Spherical Roller Bearings
Spherical Roller Bearings Introducing the newest series of advanced, high performing spherical roller bearings offering higher speed and load capacities suitable for a wide variety of industrial applications.
STAUFF STAUFF. Local solutions for individual customers worldwide. Medium Pressure Filters SMPF FILTRATION TECHNOLOGY
STAUFF THIS IS STAUFF RESPONSE AND FLEXIBILITY COMPETENT SERVICE PROMPT DELIVERY ENSURED QUALITY FRIENDLY SERVICE PROVEN IN PRACTICE Australia Stauff Corporation (Pty.) Ltd. P.O.Box 227, 24-26 Doyle Avenue,
Bearings for the Cement and Ready-Mix Concrete Industries
Bearings for the Cement and Ready-Mix Concrete Industries Market leading NSK technology that increases bearing life and reduces maintenance costs and downtime. Upgrading to NSK takes your operation to
CERTIFICATE. ElringKlinger AG
CERTIFICATE This is to certify that with the organizational units/sites as listed in the annex has implemented and maintains an Environmental Management System. : Development and manufacturing of gaskets,
FILTRATION TECHNOLOGY STAUFF. STAUFF Check Oil Analysis & Oil Sampling Kit. Quality and Service Worldwide
FILTRATION TECHNOLOGY 2003 STAUFF STAUFF Check Oil Analysis & Oil Sampling Kit Quality and Service Worldwide STAUFF Check Oil Analysis & Oil Sampling Kits Australia Stauff Corporation (Pty.) Ltd. P.O.Box
Parts Manual. cascade
c Parts Manual Model Serial Number Fork Positioner 100D-FPB-04C R1 cascade corporation OR Write: Cascade Corporation, P.O. Box 20187, Portland, OR 97220 Internet: www.cascorp.com Base Unit Group 1 2 3
CERTIFICATE. Freudenberg Sealing Technologies GmbH & Co. KG. with the organizational units/sites as listed in the annex
CERTIFICATE This is to certify that with the organizational units/sites as listed in the annex has implemented and maintains an Occupational Health and Safety Management System. : Development, production
ISO Interface. Large capacity. Light weight. Accommodates enclosure IP65. Solenoid Valve (with M Connector) Conforming to ISO
P-EX01-A Solenoid Valve (with M Connector) Conforming to ISO 1507-1, Large capacity EVS1-01 (Size: 01) EVS1-0 (Size: 0) Light weight Size 01 (-position): 0.6kg Size 0 (-position): 0.18kg Flow rate 1000L/min
Integral Bonnet Needle Valves
Integral Bonnet Needle Valves SINV Series eatures Compact design Low operating torques Panel mountable Variety of stem tips Variety of End Connections Straight and Angle flow patterns Each and every valve
Integral Bonnet Bar Stock Needle Valves
Integral Bonnet Bar Stock Needle Valves SBNV Series Features Integral bonnet design Bar stock body Compact design Low operating torques Variety of End Connections Straight and Angle flow patterns Each
LOKRING & LOKCLIP SOLDER-FREE TUBE AND HOSE CONNECTIONS
LOKRING & LOKCLIP SOLDER-FREE TUBE AND HOSE CONNECTIONS For the installation and repair of vehicle air conditioning lines ONE SYSTEM ENDLESS POSSIBILITIES MORE THAN 1.5 BILLION LOKRINGS HAVE BEEN SUCCESSFULLY
Parts Manual. cascade. corporation. 100F Sideshifter. Model 100F-SSS-B084 R1. Catalog Number
c Parts Manual Model Catalog Number 100F Sideshifter 100F-SSS-B084 R1 corporation OR Write: Cascade Corporation, P.O. Box 20187, Portland, OR 97220 Internet: www.cascorp.com All dealerships with an open
STAUFF STAUFF. Local solutions for individual customers worldwide. Return Line Filters RTF FILTRATION TECHNOLOGY. Ordering Code # :SFT A - UK
STAUFF THIS IS STAUFF RESPONSE AND FLEXIBILITY COMPETENT SERVICE PROMPT DELIVERY ENSURED QUALITY FRIENDLY SERVICE PROVEN IN PRACTICE Australia Stauff Corporation (Pty.) Ltd. P.O.Box 227, Unanderra Wollongong,
1. General company data
Self disclosure 1. General company data 1.1. Company address Company: Address: Zip-Code: City: Country: Telephone: Fax: Email: Internet: Established: Affiliation: Ownership: Legal form: CC Reg no: VAT:
Quality and Service worldwide. Hydraulic Accessories Flow Indicators
Quality and Service worldwide Hydraulic Accessories Flow Indicators Distributor Walter Stauffenberg GmbH & Co. KG P.O.Box 1745 D-58777 Werdohl Im Ehrenfeld 4 D-58791 Werdohl Tel. : + 49 (0) 2392 916-0
NI PS-15/16/17 Side Mount Brackets
INSTALLATION GUIDE NI PS-15/16/17 Side Mount Brackets This document provides the installation procedure for the NI PS-15/16/17 Side Mount Brackets. This accessory is used to mount NI PS-15/16/17 power
Installation Instructions
c Installation Instructions C-Series Integral Sideshifter & K-Series Fork Positioner Installation Kits for Toyota Masts This sheet provides installation instructions for Cascade Installation Kits. Each
The ideal solution for doors up to 1100 mm wide tested and approved to EN 1154
TS 72 Door Closer DORMA TS 72 Door Closer The ideal solution for doors up to 1100 mm wide tested and approved to EN 1154 The DORMA TS 72 is the ideal multi-purpose door closer for all standard door designs
Parts Manual. cascade
c Parts Manual Model Catalog Number Bale Clamp 40D-BCB-55A R0 corporation OR Write: Cascade Corporation, P.O. Box 2087, Portland, OR 97220 Internet: www.cascorp.com Cascade is a Registered Trademark of
Union Bonnet Needle Valves
Union Bonnet Needle Valves SUNV Series Features Panel mountable Nonrotating stem tips Variety of stem tips Variety of End Connections Straight and Angle flow patterns Each and every valve is tested at
Single-acting pneumatic cylinder type ECS
Single-acting pneumatic cylinder type ECS Information is only for informational purpose. All specifications are subject to change without notice. 1 2015-06-18 issue: 2 Single-acting pneumatic cylinder
Installation instructions
www.somfy.com Sonesse 0 DCT Installation instructions Ref :505080A Please read installation instructions and programming instructions completely prior to proceeding with installation and programming. Failure
Parts Manual. cascade
c Parts Manual Model Catalog Number Fork Positioner 120K-FPS-C023 R1 corporation OR Write: Cascade Corporation, P.O. Box 20187, Portland, OR 97220 Internet: www.cascorp.com Fork Positioner Assembly Sticker
Parts Manual. cascade
c Parts Manual Model Catalog Number Fork Positioner 55K-FPS-A058 R0 corporation OR Write: Cascade Corporation, P.O. Box 20187, Portland, OR 97220 Internet: www.cascorp.com Fork Positioner Assembly Sticker
Parts Manual. cascade
c Parts Manual Model 65K Fork Positioner Catalog Number 65K-FPS-B003 R1 corporation OR Write: Cascade Corporation, P.O. Box 20187, Portland, OR 97220 Internet: www.cascorp.com All dealerships with an
Parts Manual. cascade
c Parts Manual Model Serial Number Carton Clamp 25D-CCS-33A R2 corporation OR Write: Cascade Corporation, P.O. Box 2087, Portland, OR 97220 Internet: www.cascorp.com Cascade is a Registered Trademark of
AUSTRIA. Table 1. FDI flows in the host economy, by geographical origin. (Millions of US dollars)
Table 1. FDI flows in the host economy, by geographical origin World 5 690 138 6 195 3 184 10 784 7 933 31 154 6 858 9 303 840 10 618 5 760 Developed economies 5 740 13 5 341 2 689 10 137 6 291 29 721
Parts Manual. cascade
c Parts Manual Model Serial Number F-Series Sideshifter -SSS-A157 R3 corporation For Technical Assistance call: 800-227-2233, Fax: 888-329-8207 To Order Parts call: 888-227-2233, Fax: 888-329-0234 OR Write:
PREVIEW. Fieldbus System for Distributed I/O NEW PRODUCTS
NEW PRODUCTS PREVIEW Fieldbus System for Distributed I/O! Dual Port EtherNet/IP TM Gateway controls up to 8 Valve Manifolds and 8 Input blocks Controls up to 128 Inputs and 128 Outputs Supports QuickConnect
Installation Instructions
c Installation Instructions Mark Radio Frequency (RF) Hydraulic Control Kit 6819446 This sheet provides installation instructions for the truck mounted component and replacement parts list for Cascade
Installation Instructions
c Installation Instructions Flow Control s This sheet provides installation instructions and replacement parts list for Cascade Flow Control s. The valve reduces the flow rate to the attachment and returns
Oil Solutions. RIF 300 Return Line Filters. Local solutions for individual customers worldwide FILTRATION TECHNOLOGY
Oil Solutions FILTRATION TECHNOLOGY RIF 3 Return Line Filters Local solutions for individual customers worldwide www.oilsolutions.com.au sales@oilsolutions.com.au Distributor Walter Stauffenberg GmbH &
Drive systems & electrical energy production for construction, local government structures, large infrastructure and industrial projects
09.2007 / a 4183 en - 03.2008 / b Drive systems & electrical energy production for construction, local government structures, large infrastructure and industrial projects www.leroy-somer.com Drive systems
LOKRING & LOKCLIP SOLDER-FREE TUBE AND HOSE CONNECTIONS
LOKRING & LOKCLIP SOLDER-FREE TUBE AND HOSE CONNECTIONS For the installation and repair of vehicle air conditioning lines ONE SYSTEM ENDLESS POSSIBILITIES MORE THAN 1.5 BILLION LOKRINGS HAVE BEEN SUCCESSFULLY
Parts Manual. cascade
c Parts Manual Model Catalog Number Multi-Purpose Clamp 8G-MCS-48 corporation For Technical Assistance call: 800-7-, Fax: 888-9-807 To Order Parts call: 888-7-, Fax: 888-9-04 OR Write: Cascade Corporation,
Installation Instructions
c Installation Instructions K-Series Fork Positioner Termination Kits 0, 0, 0, 000 and 0 This sheet provides installation instructions and replacement parts list for Cascade High Termination Kits 0, 0,
WORLD MOTOR VEHICLE PRODUCTION BY COUNTRY AND TYPE QUARTERS June 14, 2018
QUARTERS 2017-2018 June 14, 2018 CONTENTS BASEPROTOTAL BASEPROCARS BASEPROLCV BASEPROHCV BASEPROBC Summation of cars, LCVs, HCVs, heavy buses Cars LCVs HCVs Heavy buses Note: The production of cars and
Parts Manual. cascade
c Parts Manual Model Single-Double Pallet Handler Catalog Number 5G-FDS-A013 R6 corporation OR Write: Cascade Corporation, P.O. Box 0187, Portland, OR 970 Internet: www.cascorp.com Publications OOL CATALOG
BTS Accessories. Floor Spring Accessories
BTS Accessories Floor Spring Accessories Floor spring accessories Single action aluminium doors For single action aluminium doors Aluminium door straps 2 For flush-closing single action aluminium doors
Roll Up WireFree IR. Installation instructions
www.somfy.com TM Roll Up WireFree IR Installation instructions Ref :5059844 Safety This Somfy product must be installed by a professional motorization and home automation installer, for whom these instructions
Application Engineering Department Special Product. 170D-CFR Fork Clamp - Revolving
Parts Manual For units with serial# 2177229 2226222 Application Engineering Department Special Product 170D-CFR-66999 Fork Clamp - Revolving FEATURES:..Integral mounting includes rollers, chain anchors
NEW. PLASTIC MODULAR CHAIN WT0705-W Plastic Top Chain
NEW PLASTIC MODULAR CHAIN WT0705-W Plastic Top Chain A new 7.5 mm-pitch chain has been added to our lineup of plastic modular chains. Features of WT0705-W Plastic Modular Chain Knife-edge conveyor applications
Repair Parts Sheet IPA-2521 IPE-2505 IPE-2510 IPH-2530 IPH-2531 A UNIT OF APPLIED POWER INC. L1272 Rev. E 11/07
Repair Parts Sheet A UNIT OF APPLIED POWER INC. L7 Rev. E /07 IPA IPE0 IPE0 IPH0 IPH Accessories: Press Conversion Kit IPK0 VBlocks A0 Model Pump Cylinder IPA PAM0 Twin Air Pump RC IPE0 PUJ00B Electric
Portable Digital Clamp Force Indicator
O PERATOR S GUIDE Portable Digital Clamp Force Indicator Manual Number 6094544-R1 cascade corporation Cascade is a Registered Trademark of Cascade Corporation C ONTENTS Page Introduction i Key Functions
Parts Manual. cascade
c Parts Manual Model Serial Number Fork Positioner -FPS-A141 R0 corporation OR Write: Cascade Corporation, P.O. Box 20187, Portland, OR 97220 Internet: www.cascorp.com Cascade is a Registered Trademark
STAUFF Test. Test Couplings. Test Adaptors. Test Hoses and Connectors. Product Overview
Test Adaptors Test Hoses and Connectors Product Overview STAUFF Test Test couplings from the STAUFF Test product range are already planned in suitable positions in the hydraulic system during the design
Parts Manual. cascade
c Parts Manual Model Catalog Number Fork Positioner 55K-FPS-A469 R2 corporation OR Write: Cascade Corporation, P.O. Box 20187, Portland, OR 97220 Internet: www.cascorp.com Fork Positioner Assembly Sticker
GENERAL GAS INSTALLATION LABORATORY SOLUTIONS
GENERAL GAS INSTALLATION LABORATORY SOLUTIONS 1 2 1 3 2 1 PRECISE RESULTS NEED PRECISE EQUIPMENT The complete range of specialty gas equipment for safety, control and productivity from source to process.
Parts Manual. cascade
c Parts Manual Model Catalog Number Fork Positioner 55K-FPS-A223 R1 corporation OR Write: Cascade Corporation, P.O. Box 20187, Portland, OR 97220 Internet: www.cascorp.com All dealerships with an open
H2R and H2L Cable Reel
c Installation Service and Parts Manual H2R and H2L Cable Reel Serial Numbers 678971 through 678972 Part Number 679932-R1 cascade corporation For Technical Assistance call: 800-227-2233, Fax: 888-329-8207
Platform Systems. applications
Rail Systems Platform Systems applications Heavy Metro Systems Light Rail Systems Automated Metros APMs - Airport Link/City Shopping New and Retrofit Installations Underground, Over-ground and Elevated
Spain s exports by oil product group and country of destination
Corporación de Reservas Estratégicas de Productos Petrolíferos Castellana, 79 28046 Madrid T. +34 91 360 09 10 Updated F. +34 91 420 on39 45 www.cores.es February 13 th 2017 Spain s exports by oil product
A04 Worm gear reducers and gearmotors
Products Media No. 4005 A04 Worm gear reducers and gearmotors North America Issue Edition October 2011 . A04 Edition October 2011 North America Issue 5 6 A04 Edition October 2011 North America Issue
2-Way 3-Way 2-Way 3-Way. Component
BT Sris (,000psig) BTH Sris (10,000psig) Componnt 2-Way 3-Way 2-Way 3-Way 1 Handl Phnolic with brass insrt Phnolic with brass insrt 2 St scrw Stainlss stl Stainlss stl 3 Panl nut S1/A27 S1/A27 4 Body S1/A479
Total credit to the non-financial sector (core debt), % of GDP Table F1.1
Total credit to the non-financial sector (core debt), % of GDP Table F1.1 2012 2013 2014 2015 2016 Q2 16 Q3 16 Q4 16 Q1 17 Q2 17 Argentina 62.6 66.4 64.6 75.5 75.3 81.7 80.1 75.3 71.6 72.7 Australia 208.0
Portable Clamp Force Indicator
O PERATOR S GUIDE Portable Clamp Force Indicator Manual Number 6074874-R1 cascade corporation Cascade is a Registered Trademark of Cascade Corporation C TENTS Page Introduction i Key Functions 1 Setup
Parts Manual. cascade
c Parts Manual Model Catalog Number Sideshifter 100F-SSS-B017 R2 cascade corporation OR Write: Cascade Corporation, P.O. Box 20187, Portland, OR 97220 Internet: www.cascorp.com PART NUMBER Decals 1 2 Recommended
4CKNYC[A2 A2 AKPFGZ GRU AXLE RAIL / 02
P641G RAILWAY INDEX Mitsubishi Materials is constantly engaging ultra modern technologies in the research and development of cutting tools. Results of the research provide solutions for the ever increasing
Parts Manual. cascade
c Parts Manual Model Serial Number F-Series Sideshifter -SSS-A016 R3 cascade corporation For Technical Assistance call: 800-227-2233, Fax: 888-329-8207 To Order Parts call: 888-227-2233, Fax: 888-329-0234
Parts Manual. cascade
c Parts Manual Model Serial Number F-Series Sideshifter -SSS-A062 R5 cascade corporation For Technical Assistance call: 800-227-2233, Fax: 888-329-8207 To Order Parts call: 888-227-2233, Fax: 888-329-0234
Infographics on Electromobility (January 2019)
Infographics on Electromobility (January 2019) Publisher: BMW Group Corporate Communications Electromobility Last Update: 04.01.2019 Contact: presse@bmw.de ELECTROMOBILITY IN GERMANY. SHARE IN NEW REGISTRATIONS
Parts Manual. cascade
c Parts Manual Model Catalog Number 45G Rotator 45G-RRB-0A R corporation OR Write: Cascade Corporation, P.O. Box 087, Portland, OR 970 Internet: www.cascorp.com All dealerships with an open account, please
thousands of PLN a b c d e f g h i j k l
Note 3d INTEREST OR SHARES IN RELATED UNITS Current wording: Note 3d INTEREST OR SHARES IN RELATED UNITS No thousands of PLN a b c d e f g h i j k l name of entity (company) including legal form seat 1
Stafsjö s ATEX solutions for category 1 D (Zone 20)
Stafsjö s ATEX solutions for category 1 D (Zone 20) Data is only for informational purpose. All specifications are subject to change without notice. 1 2017-02-2 issue 1 ATEX solutions for category 1 D
Parts Manual. cascade
c Parts Manual Model Catalog Number Carton Clamp 35D-CCS-35Q R3 corporation OR Write: Cascade Corporation, P.O. Box 2087, Portland, OR 97220 Internet: www.cascorp.com Cascade is a Registered Trademark
Parts Manual. cascade
c Parts Manual Model Serial Number Fork Positioner 55K-FPS-A030 R1 corporation OR Write: Cascade Corporation, P.O. Box 20187, Portland, OR 97220 Internet: www.cascorp.com Fork Positioner Assembly Sticker
Parts Manual. cascade
c Parts Manual Model Catalog Number Fork Positioner 55K-FPS-A011 R2 corporation OR Write: Cascade Corporation, P.O. Box 20187, Portland, OR 97220 Internet: www.cascorp.com Fork Positioner Assembly Sticker
Setting a New Standard in Emission Testing MOTOR EXHAUST GAS ANALYZER TEST SYSTEM CONCEPT MEXA-ONE offers an intuitive user interface with a highly efficient hardware and software design. This results in
Pure. Lever Handle Range
Pure Lever Handle Range Pure Lever Handle Range For timber doors For narrow stile doors Pure 100 Pure 3020 Pure 100 Pure 354 V Pure 906 Pure 100 V Pure 99 Pure 906 2 Pure, GB DORMA Pure. Lever handle sets
ECO-DESIGN OF ELECTRIC MOTORS
4615 en - 2010.11 / a ECO-DESIGN OF ELECTRIC MOTORS Main rules for application of European regulation no. 640/2009 of 22 July 2009 and ecodesign directive 2009/125/EC of 21 October 2009 1 - INTRODUCTION
NSK Precision Technology: The Gold Standard. An Insider s Guide to NSK Machine Tool Solutions
NSK Precision Technology: The Gold Standard An Insider s Guide to NSK Machine Tool Solutions Interchange Guide for Precision Angular Contact Bearings - NN30xx(K) - NNU49xx(K) N10xx(K) FAFNIR BARDEN/FAG
Quick Start Guide FOR SUNNEN HORIZONTAL HONING MACHINE MODEL: SH-4000 SERIES I-SH-10001
I-SH-10001 Quick Start Guide FOR SUNNEN HORIZONTAL HONING MACHINE MODEL: SH-4000 SERIES READ THE FOLLOWING INSTRUCTIONS THOROUGHLY AND CAREFULLY BEFORE UNPACKING, INSPECTING, OR INSTALLING THE SUNNEN TUBE
Parts Manual. cascade. corporation. Model. 120H Tower Roll Clamp 120H Catalog Number
c Parts Manual Model Catalog Number 0H Tower Roll Clamp 0H74584 corporation OR Write: Cascade Corporation, P.O. Box 087, Portland, OR 970 Internet: www.cascorp.com 5 4 Decals 7 8 C-7554-4 RC80.ai 4 5 C-7554-5595-R
Information Technology and Economic Development: An Introduction to the Research Issues
November 1998 Working Papers No. 153 Information Technology and Economic Development: An Introduction to the Research Issues TABLE 1 WORLD-WIDE INFORMATION TECHNOLOGY MARKET BREAKDOWN, 1995
Thermal Coal Market Presentation to UNECE Ad Hoc Group of Experts on Coal in Sustainable Development December 7, 2004
Thermal Coal Market Presentation to UNECE Ad Hoc Group of Experts on Coal in Sustainable Development December 7, 2004 Barlow Jonker Pty Ltd Commercial in Confidence 1 Presentation Outline 1. Barlow Jonker
Parts Manual. cascade
c Parts Manual Model Catalog Number Carton Clamp 35D-CCS-35A R3 corporation OR Write: Cascade Corporation, P.O. Box 2087, Portland, OR 97220 Internet: www.cascorp.com Blank Safety Decals 2 cascade 2 cascade
Primary energy. 8 Consumption 9 Consumption by fuel. 67 th edition
Primary energy 8 Consumption 9 Consumption by fuel 67 th edition Primary energy Consumption* Growth rate per annum Million tonnes oil equivalent 27 28 29 2 211 212 213 214 215 216 217 217 26-16 Share 217
Parts Manual. cascade
c Parts Manual Model Catalog Number QFM Push/Pull E-QLB-Q00 R cascade corporation To Order Parts call: 888-7-, Fax: 888-9-0 OR Write: Cascade Corporation, P.O. Box 087, Portland, OR 970 Internet: www.cascorp.com
Pure. Lever Handle Range
Pure Lever Handle Range Pure Lever Handle Range For timber doors For narrow stile doors Pure 8100 Pure 3020 Pure 8100 Pure 3548 V Pure 8906 Pure 8100 V Pure 8998 Pure 8906 DORMA Pure. Lever handle sets
STAUFF. Local solutions for individual customers worldwide. Medium Pressure Filters MF-MQ. Operating Pressure: max 280 bar (4.
STAUFF F I LT R AT I O N T E C H N O L O G Y Medium Pressure Filters MFMQ Operating Pressure: max 280 bar (4.000 PSI) Local solutions for individual customers worldwide STAUFF Filtration Technology MediumPressure
Installation Instructions
c Installation Instructions Pressure Regulator Kit 6804769 This manual provides instructions for Cascade Pressure Regulator Kit 68047669 for carton clamps. The kit includes a valve, a driver operated high-low
BP Statistical Review of World Energy June 2017
BP Statistical Review of World Energy June 217 Primary energy 8 Consumption 8 Consumption by fuel 9 66 th edition Primary energy Consumption* Growth rate per annum Million tonnes oil equivalent 26 27 28
Parts Manual. cascade. corporation. Model. Fork Positioner 45D-FPB-109. Catalog Number
c Parts Manual Model Catalog Number Fork Positioner 45D-FPB-09 cascade corporation To Order Parts call: 888-7-, Fax: 888-9-04 OR Write: Cascade Corporation, P.O. Box 087, Portland, OR 970 Internet: www.cascorp.com
Valves Protective devices Mounting accessories. Instrumentation valves and accessories
Valves Protective devices Mounting accessories Instrumentation valves and accessories Everything from one source WIKA is a world leader in the manufacture of mechanical pressure measuring instruments.
Bell Housings & Couplings Quality and Service worldwide
ISO 9002 Lic. 3765 Standards ustralia Bell Housings & Couplings Quality and Service worldwide Distributor Walter Stauffenberg GmbH & Co. KG P.O.Box 1745 D-58777 Werdohl Im Ehrenfeld 4 D-58791 Werdohl Tel.
Parts Manual. cascade
c Parts Manual Model 36G-CCT Tipping Clamp Catalog Number 36G74237 corporation OR Write: Cascade Corporation, P.O. Box 20187, Portland, OR 97220 Internet: www.cascorp.com Blank 1 Safety Decals 4 1 3 2
One machine multiple applications.
One machine multiple applications. image 1 image 2 image 3 image 4 Manufacturing of engineering plastics. Processing of PVC. Manufacturing of TPE. Manufacturing of master batches. Coperion worldwide. >