Tooling & Accessories R280 / R282 / R299
|
|
|
- Oliver Simmons
- 6 years ago
- Views:
Transcription
1 Tooling & Accessories R280 / R282 / R299 A
2
3 CONTENT Pages TOOLING Joule effect soldering devices... A-4 tripping tools... A-4 and A-6 to A-7 Point gauges... A-4 oldering... A-5 Installation tools... A-5 to A-6 Cassettes... A-7 Kits for semi-rigid and flexible cables...a-8 to A-10 Kit for microporous semi-rigid cables... A-11 Kits for flexible cables... A-11 Crimp tools... A-12 to A-13 Torque wrench... A-14 Insertion and extraction tools... A-15 to A-17 TOOLING AN ACCEORIE ACCEORIE liding contacts... A-17 Glass beads and EMI gaskets... A-18 Insulated washers... A-18 older tag... A-19 Panel sealing gaskets... A-19 Cable panel feedthrough... A-19 Cable terminations...a-20 Heatshrink sleeves... A-21 Cable boots... A-21 Panel drilling...a-22 A-3
4 TOOLING JOULE EFFECT OLERING EVICE, TOOL, POINTER GAUGE JOULE EFFECT OLERING EVICE Compliant with European standards n 89/336/CEE and 73/23/CEE (electromagnetic compatibility and low voltage) It allows to solder: - center contacts and bodies to semi-rigid cables, - center contacts to flexible cables, - solder pot receptacles. Photo 1 Photo 2 Photo Power elivered with R Watts Pliers + electrode: R R Watts Pliers: R Electrode: R TRIPPING TOOL FOR EMI-RIGI CABLE This easy to use tool removes the cable's outer conductor and dielectric leaving the center conductor stripped to the proper length. It is supplied with a removal blade which can be ordered separately whenever required. Please specify P/N R when ordering the replacement blade. Including ajustment gauge and male hex key. Cable group Cable group dia. RG " R RG " R RG401.2" R POINTER GAUGE FOR EMI-RIGI CABLE pecially designed for sharpening the end of the cable's center conductor, this sharpening tool-gauge is supplied with a removable blade which can be ordered separately whenever required. Cable group Cable group dia. tripping length setting Replacement blade RG " RG " R (.085) R (.125) R (.051) R (.125) R R A-4
5 OLERING FIXTURE (JIG) OLERING AN INTALLATION TOOL TOOLING Cable group Cable group dia. RG405/RG402/RG "/.141"/.2" R RG402/RG "/.2"/.3" R RILLING TOOL FOR GLA BEA MOUNTING ia. (mm) R Must be used with machine tool to obtain the required concentricity and dimensions. CREW TAP FOR HERMETIC RECEPTACLE MA, BMA,... R imension 1/4 36 UNs 2B INTALLATION TOOL FOR MA CREW-ON FEMALE RECEPTACLE Coupling torque (N/cm) R (replace R ) 280 R A-5
6 TOOLING INTALLATION AN TRIPPING TOOL INTALLATION TOOL FOR BMA FEMALE RECEPTACLE R XXX Coupling torque (N/cm) imension A mm (inch) R (.209) TORQUE CREWRIVER FOR MP RECEPTACLE with adapter (fig.1) adapter only (fig.2) Note Coupling torque R R full detent 7.96 lbf.inch (90cmN) R Limited detent R mooth bore TIGHTENING TOOL Fig. 1 Fig. 2 R New universal plier which facilitates the tightening of coupling nuts. The removable inserts are made of plastic in order to avoid damage on the knurling (for ~ 130 Ncm). TRIPPING TOOL R FOR CABLE IA. 2.5 TO 8mm (RG58, RG59, RG62) (includes standard cassette R ) 1) imension A in accordance with the plug stripping dimensions (not defined by the tool) esignation tripping dimension Fixed-blade coaxial cable stripping tool for cable dia. 2.5 to 8.0 mm (.1" to.315") R Blades can be adjusted to precise cutting depths. Interchangeable blade cassette holders eliminate need to readjust blades R adjustable blade, 2 or 3 stages adjustable R replacement blade red, 2 stages B = 6mm R replacement blade green, 3 stages B = 5.1mm C = 7.1mm R replacement blade blue, 2 stages B = 6.5mm R replacement blade yellow, 2 stages B = 12mm R replacement blade grey, 2 stages B = 3.9mm R replacement blade brown, 3 stages B = 3.5mm C = 7.5mm A-6
7 TRIPPING TOOL TRIPPING TOOL R FOR CABLE IA. 2.5 TO 11mm esignation TOOLING R Cable stripping range 2.5 to 11mm (.0984" to.4331") pring Tension - queeze to Open, Insert Cable & Rotate Around Jacket elivers mooth Consistent trips. 9 Position Adjustable epth Blade KIT R : TRIPPING TOOL FOR 2.5 TO 7.6mm IA. FLEXIBLE CABLE (without cassette) R esignation tripping tool 1 - tripping tool 2 - White V guide for dia ext. cable 2.5 to 3 mm 3 - Red V guide for dia ext. cable 3 to 5 mm 4 - Blue V guide for dia ext. cable 5 to 6.4 mm 5 - Yellow V guide for dia ext. cable 6.4 to 7.6 mm 6 - Wrench 7 - Gauge CAETTE FOR R esignation Length B (mm) Length C (mm) R Orange stripping cassette R White stripping cassette R Green stripping cassette R Yellow stripping cassette A-7
8 TOOLING KIT FOR EMI-RIGI CABLE R : Bending kit N esignation Old cross reference Mark 1 R Bending (09) 2 R Bending gauge.085" (02) 3 R Bending gauge.085" (01) 4 R Bending gauge.141" (04) 5 R Bending gauge.2" (05) 6 R Bending gauge.141" (03) KIT: tripping + sharpening for semi-rigid cables R : tripping 3.17 (.125) + sharpening for.085" semi-rigid cables N esignation 1 R tripping tool R Replacement stripping blade 3 R Blade installation gauge R Hex 1.5 (.059) 5 R harpening and length-setting tool 3.17 (.125 ) long on R Replacement sharpening blade 7 R Hex 1.27 (.05) A-8
9 KIT FOR EMI-RIGI CABLE R : tripping 2.17 (.085) + sharpening for.141" semi-rigid cables N esignation 1 R tripping tool R Replacement stripping blade 3 R Blade installation gauge R Hex 1.5 (.059) 5 R harpening and length-setting tool 2.17 (.085 ) long on R Replacement sharpening blade 7 R Hex 1.27 (.05) R : tripping 3.17 (.125) + sharpening for.141" semi-rigid cables N esignation 1 R tripping tool R Replacement stripping blade 3 R Blade installation gauge R Hex 1.5 (.059) 5 R harpening and length-setting tool 3.17 (.125 ) long on R Replacement sharpening blade 7 R Hex 1.27 (.05) TOOLING R : MA solder kit (uitable for commercial and standard MA) N esignation Mark 1 R Cable holder 2 R older gauge (cab.085 : mark 61, cab.141 : mark 62) 3 R oldering locator tool for right angle MA (84) 4 R tripping tool 5 R Trimmer 6 R oldering locator tool for center contact 7 R oldering locator tool for male MA cable.085 (85) 8 R oldering locator tool for male MA B cable.085 (78) 9 R oldering locator tool for right angle MA B (88) 10 R oldering locator tool for female cable.085 (80) 11 R oldering locator tool for female cable.141 (86) 12 R Retaining ring pliers 13 R Retaining insert tool 14 R ielectric recess tool 15 R ielectric recess gauge for female (92) 16 R Control gauge for female (81) 17 R oldering locator tool for male (82) 18 R Control gauge for male (83) 19 R ielectric recess gauge for male (93) 20 R oldering locator tool for male MA B cable.141 (77) 21 R oldering locator tool for male MA cable.141 (87) 22 R oldering fixture 23 R ielectric insert tool + dielect. plunger for female 24 R ielectric insert tool + dielect. plunger for male A-9
10 TOOLING KIT FOR EMI-RIGI CABLE R : TNC 18 Ghz solder kit N esignation Mark 1 R oldering locator tool for male (128) 2 R oldering locator tool for female (129) 3 R Locking tool (132) 4 R oldering fixture (10) 5 R oldering locator tool for.085 cable 6 R oldering locator tool for.141 cable (133) 7 R ielectric recess tool (97) 8 R older gauge (63) R : older kit for N connectors A-10 N esignation Old cross reference Mark 1 R dielectric insertion tool + plunger for N jacks (36) 2 R dielectric insertion tool + plunger for N jacks (37) 3 R oldering fixture (11) 4 R N soldering fixture for female centre contact (126) 5 R N soldering fixture for male centre contact (127) 6 R N soldering fixture for cable R N soldering fixture for cable R N soldering fixture for cable R N soldering fixture for cable.2 10 R oldering fixture for N plug cable R oldering fixture for N plug cable.2 12 R older gauge thickness 0.35 (.0138 ) (62) 13 R older gauge thickness 0.45 (.0177 ) 14 R older gauge thickness 0.70 (.0276 ) (64) 15 R ielectric recess tool for cable R ielectric recess tool for cable.2
11 R : older kit for MA 2.9 No. REFERENCE EIIGNATION 1 R Torque wrench 2 R Pointer gauge for cable.085 MP 3 R Pointer gauge for cable.141 MP 4 R oldering positioner cable R oldering positioner cable R oldering assembly jig 7 R tripping tool cable.141 MP 8 R tripping tool cable.085 MP 9 R Cable holder KIT FOR MICROPOROU EMI-RIGI CABLE TOOLING KIT FOR FLEXIBLE CABLE R : tripping + crimping kit for cables 10+11//s+d N esignation 1 R Crimping tool 2 R Green stripping cassette 3 R Green stripping cassette 4 R Adjustment bit 5 R calpel Universal tool body 6 R a - Red V guide for dia ext. cable 7 to 9 mm b - Blue V guide for dia ext. cable 9 to 11.5 mm c - Yellow V guide for dia ext. cable 11.5 to 14 mm d - Two interior supports e - Universal tool body f - Adjustement bit (Identical R ) g - Wrench Inside the box, every part number can be ordered separately. A-11
12 TOOLING CRIMP TOOL MIL CRIMP TOOL (M22520/5-01) R (dies not included) IE FOR R Cable group Cable group dia. dieset only tool complete with dies RG178/RG196/R178/ RG174/RG316/RG179 2// /+75/ R TA (.128) 2.67 (.105) RG58/RG141/RG142/ RG223/RG400 5// - 5// R (.213) 1.73 (.068) KX6-RG62 6/ R (.255) 1.73 (.068) CRIMP TOOL (dies included) Fig. 1 Fig. 2 Fig. 3 A-12 Fig. Cable group Cable group dia. R "O/.048"O - RG178/RG196/.075"O RG174/RG316/RF179 1/+75-2// // +75 Color of handles Red 4.52 (.178) 3.25 (.128) 2.67 (.105) R RG122/RG58/RG62 4/+75-5/ - 6/75+93 Orange 6.48 (.255) 5.41 (.213) 1.73 (.068) R RG6 8/75+95 Blue 8.23 (.324) 1.73 (.068) R RG393/RG214 10// // - 11// Yellow (.415) 2.54 (.1) R RG178/RG174/RG316/ R316/RG179/R179 2/ /+75/+ Black 3.84 (.131) 3.25 (.128) 0.72* (.028) * quare crimping die.
13 UNIVERAL CRIMPING TOOLKIT CRIMP TOOL TOOLING R esignation Crimping tool R ies part numers: R for RG174/RG179 R for RG58/RG59/RG62 R for RJ45 plugs R for RJ11/12 plugs BNC TOOLKIT R (Ω) esignation 1x R Crimp tool for cable diameter 5 or 6 mm. Hex.: 1.73/5.41/ x R BNC male, straight, crimp for RG58 1x R trip tool 1x R Replacement blade brown, 3 step for RG58, RG59 R (75Ω) esignation 1x R Crimp tool for cable diameter 5 or 6 mm. Hex.: 1.73/5.41/ x R BNC male, straight, crimp for RG59 1x R trip tool 1x R Replacement blade brown, 3 step for RG58, RG59 CRIMP TOOL R FOR CENTER CONTACT LOCATOR TOOL FOR CENTER CONTACT CRIMP TOOL R R R Note For pin contact for socket contact A-13
14 TOOLING TORQUE WRENCH TORQUE WRENCH 4 to 10mm Accross flats (mm) Coupling torque (N.cm) R (.236) 30 R (.2) 60 to 80 R to 120 R (.315) 60 R R (.256) 80 to 120 TA (.315) 395 (35 lbf-in) TA (.218) 34 (48 oz-in) TA (.156) 21 (30 oz-in) TA (.218) 68 (96 oz-in) TORQUE WRENCH 10 to 21 mm Accross flats (mm) Coupling torque (N.cm) R (.5) 265 R (.710) 170 R (.748) R R (.827) 400 TORQUE WRENCH 32 mm A-14 Accross flats (mm) Coupling torque (N.cm) R (1.260) 30
15 EXTRACTION TOOL FOR BMA & COAXIPACK 2 INERTION and EXTRACTION TOOL TOOLING Fig. 2 Fig. 1 Fig. Use Note R For removing BMA floating jack R U01 For male COAXIPACK 2 inserts R U02 For female COAXIPACK 2 inserts MPM/MP EXTRACTION TOOL FOR AAPTER Fig. 3 A dimension Adapters R mm MPM R XXX R mm MP R XXX A MPM/MP EXTRACTION TOOL (for right angle cable plugs) Fig. Plugs R MP R222 15X XXX R MPM R201 15X XXX Fig. 1 Fig. 2 COAXIPACK 2 EXTRACTION TOOL R HC 43 INERTION & EXTRACTION TOOL R A-15
16 TOOLING EXTRACTION TOOL UMP EXTRACTION TOOL Photos Note To disconnect R Axial disconnection H2 R Lateral disconnection H2, H2.6 & H3 This tool only applies to lock version. No tool needed for UMP snap of slide versions Photo 1 Photo 2 MM AN MMT EXTRACTION TOOL MML extraction tools R R eries MMT MM Materials and finish: black anodized aluminium. The anodization allows the electric insulation and protects from the oxidization. To disconnect Packaging R H2.5 & H2.0 Unit R H1.5 QMA EXTRACTION TOOL (optional for high density applications) R This tool can be used with either straight or right angle connectors. QRE EXTRACTION TOOL TA-0457 A-16 This tool can be used with either straight or right angle connectors.
17 EXTRACTION TOOL and LIING CONTACT EXTRACTION TOOL FOR RIGHT ANGLE MCX AN MMBX CONNECTOR AN CAP MOUNTING Flat dimension: inch (mm) R (7) This tool has two functions - fitting of covers on right angle connectors, - extraction of these models after coupling. OPTIONAL LIING CONTACT and insulators TOO/ACCEORIE Fig. 1 Fig. 2 Fig. 3 Type Fig imensions (mm) A B C Packaging R R ocket R pieces R / R Pin R Unitary R Insulator R R pieces R CONTACT FOR FIEL REPLACEABLE RECEPTACLE A C B Fig. 1 Fig. 2 Fig. 3 Fig. Termination A B C Packaging R Tab R Tab special x W R Tab R Cylindrical 1.77 dia pieces R Cylindrical 3.37 dia R Tab special x W A-17
18 ACCEORIE GLA BEA, EMI GAKET AN INULATE WAHER EMI/RFI GAKET Packaging R pieces GLA BEA/HERMETIC EAL Hermeticity guaranteed at 10-8 atm.cm 3 /s imensions (mm) Packaging A B C E R (.180) (.072) R (.012) 2.52 (.099) 1.60 (.063) 1.3 (.051) 100 R (.180) 1.83 (.072) 1 R (.076) 0.38 (.015) 2. (.098) 1.56 (.061) 1.59 (.062) 100 R (.051) R (.018) 2.85 (.112) 1.60 (.063) 4.57 (.180) 1.83 (.072) R R (.070) 2.03 (.080) R (.109) 4 (.157) 1.77 (.070) 100 R (.230) 1.93 (.076) 1 R (.029) 1.04 (.041) R (.012) 1.93 (.076) 1.40 (.055) 100 R (.043) 1.72 (.068) INULATE WAHER Fig. 1 Fig. 2 Fig. To be used on (partial list) Material Packaging R R R R R R R R R Nylon 100 sets R R (200 washers) R R R A-18
19 OLER TAG TAG, GAKET AN feedthrough Finish Packaging R Nickel 100 units ACCEORIE PANEL EALING GAKET eries imensions (mm) A B C R N Ø R BNC Ø Material Neoprene CABLE PANEL FEETHROUGH Fig. 1 Fig. 2 Fig. Mounting type Panel hole size Cable group dia. Cable group R Thread-in 7/16-14 UNC 2A 5/ RG58/RG141/RG142 R Thread-in 7/16-28 UNEF 2A R Thread-in 7/16 UNC 2A 6/75 RG59/RG62 R Thread-in 11/16 24 NEF 2A 10/ RG213/RG393/ 11/ RG214/RG216 R Bulkhead 4.9 mm 3 Max RG178/RG174/ RG316/RG179 R Bulkhead 8 mm 5/ RG58/RG141/RG142 A-19
20 ACCEORIE CABLE TERMINATION RIGHT ANGLE PCB CABLE TERMINATION Fig. 1 Fig. 2 Fig. 3 imensions (mm) Panel Cable group Cable dia. Fig. A B C/E drilling R P03 RG178/RG196 RG174/RG316/ RG179 2// 2.6/+75/ P01 Finish Gold Fig. 4 Note 2 pins/solder 4 pins/crimp R P04 2 pins/solder Tin lead R P01 4 pins/crimp RG " Gold 4 pins/clamp TRAIGHT PCB CABLE TERMINATION Fig. 1 Fig. 2 Fig. 3 A-20 imensions (mm) Panel Cable group Cable dia. Fig. Finish Note A B C drilling RG178/RG196 2// R pins/solder P02 Gold RG174/RG316/ R pins/solder 2.6/ - 2.6/75/ RG179 R P01 Nickel 4 pins/crimp
21 HEATHRINK LEEVE HEATHRINK LEEVE AN cable BOOT These heatshrink sleeves guarantee an IP65 moisture resistance on crimp type models and an IP 67 moisture resistance on clamp type models. ACCEORIE B Before shrinkage After shrinkage A R R Packaging 100 CABLE BOOT (material: PVC) Cable group 2.6/ 5/ 6/75 Color A: B: 2.6 C: 27 A: B: 2.6 C: 48 A: B: C: 48 A: B: C: 48 Black R R R /R * R Red R R R R Green R R R R Blue R R R R Yellow R R R R Grey R R R R White R R R R Brown R R R R Orange R R R R Violet R tandard packaging = 10 pieces - * packaging = 100 pieces. A-21
22 ACCEORIE PANEL RILLING P01 P02 P03 P04 A-22
23 AUTOMOTIVE AEROspace Cable designation Cable Group /Ω Imp. Ω Core type Cable dimensions mm (inch) Core Insulator creen RG 174 A/U RG 178 B/U RG 178 B/U RG 178 non m. RG 179 B/U RG 187 A/U RG 188 A/U RG 196 A/U RG 212 /U RG 213 /U RG 214 /U RG 215 RG 216 /U RG 217 /U RG 218 /U RG 223 /U RG 225 /U RG 303 /U RG 316 /U R 316 RG 393 RG / 2 / 2 / 2 / 2.6 / / / 2 / 8 / 10 / 11 / 10 / 11 / / 22 / 5 / 11 / 5 / 2.6 / 2.6 / 10 / 5 / / x x x x x x x x x x x x x x x x x (.019) 0.30 (.012) 0.30 (.012) 0.29 (.011) 0.30 (.012) 0.30 (.012) 0.51 (.020) 0.30 (.012) 1.41 (.056) 2.26 (.089) 2.25 (.089) 2.25 (.089) 1.21 (.048) 2.69 (.106) 4.95 (.195) 0.89 (.035) 2.38 (.094) 0.94 (.037) 0.53 (.021) 0.53 (.021) 2.39 (.094) 0.98 (.039) R 179 BT 3002 BT / / 75 5 / x x (.012) 0.31 (.012) 0.60 (.024) 1.52 (.060) 0.84 (.033) 0.84 (.033) 0.84 (.033) 1.60 (.063) 1.60 (.063) 1.52 (.060) 0.86 (.034) 4.70 (.185) 7.24 (.285) 7.24 (.285) 7.25 (.285) 7.24 (.285) 9.40 (.370) (.680) 2.95 (.116) 7.24 (.285) 2.95 (.116) 1.52 (.060) 1.52 (.060) 7.24 (.285) 2.95 (.116) Outer 2.79 (.110) 1.78 (.070) 1.83 (.072) 1.80 (.071) 2.54 (.010) 2.79 (.110) 2.79 (.110) 2.03 (.080) 8.43 (.331) (.406) (.425) (.405) (.425) (.545) (.870) 5.38 (.212) (.429) 4.32 (.170) 2.49 (.098) 2.80 (.110) 9.91 (.390) 4.95 (.195) EFENE INUTRIAL INTRUMENTATION MEICAL PACE Coaxial, rf & microwave TELECOM imply Your Best Connection Radiall cable if applicable P/N Remark C C C C C C C C na C C na C C C C C na C C C C PVC jacket FEP jacket PVC jacket non magnetic / FEP jacket FEP jacket PTFE jacket PTFE jacket PTFE jacket C C C LOH jacket FEP jacket FEP jacket s.a. 89 outh 52nd treet, uite. Technical information and sales contacts are available at : 401, Tempe, Arizona (.121) 3.55 (.140) 5.1 (.200) PVC jacket PVC jacket PVC jacket PVC jacket glass fiber jacket We offer an extensive range of solutions that supports the most demanding signal transmission applications. 4G wireless infrastructure, active array radars, IE s detection, electrical wiring in aircrafts, soldier tactical radios, in-vehicle communications networks, and magnetic resonance imaging systems are just a few of the complex applications that we support. RF coaxial connectors Multipin rectangular connectors Fiber optic connectors and transceivers Rack and panel connectors Antennas for tactical networks, aerospace Coaxial and fiber optic cable assemblies and harnesses and instrumentation High frequency microwave components Coaxial switches, including the smallest and most reliable PT relay. FEP jacket FEP jacket FEP jacket FEP jacket India - Radiall India Pvt. Ltd. Best Value-added ervices emi rigid cables MIL-C-17 standard.2".2".141".141".141".141".141".085".085".085".085".047".047" 1.63 (.064) 1.63 (.064) 0.92 (.036) 0.92 (.036) 0.92 (.036) 0.92 (.036) 0.92 (.036) 0.51 (.020) 0.51 (.020) 0.51 (.020) 0.51 (.020) 0.29 (.011) 0.29 (.011) Hand-formable Hand-formable Hand-formable Hand-formable.085".141".141".141" 0.51 (.020) 0.92 (.036) 0.92 (.036) 0.92 (.036) 5.31 (.209) 5.31 (.209) 2.98 (.117) 2.98 (.117) 2.98 (.117) 2.98 (.117) 2.98 (.117) 1.68 (.066) 1.68 (.066) 1.68 (.066) 1.68 (.066) 0.94 (.037) 0.94 (.037) (.2) 6.35 (.2) 3.58 (.141) 3.58 (.141) 3.58 (.141) 3.58 (.141) 3.58 (.141) 2.20 (.087) 2.20 (.087) 2.20 (.087) 2.20 (.087) 1.19 (.047) 1.19 (.047) C copper tubing C tinned alu tubing C copper tubing C tinned copper tubing C silvered copper tubing C tinned alu tubing C non magnetic / copper tubing C copper tubing C tinned copper tubing C tinned alu tubing C non magnetic / copper tubing C copper tubing C tinned copper tubing 2.21 (.087) 3. (.138) 4.05 (.159) 4. (.177) C C C C C ollaboration: We work closely with your engineers to understand your business, your technical needs, and your budgetary issues; Wide Product Range: We manage our product lines thru the entire lifecycle in order to offer you a wide selection of standard products at an affordable cost; Custom Products: We can tailor products to specific equipment and application needs; Global Presence: We re everywhere you need us, with worldwide sales, engineering support, R& in North America, Europe, and Asia, and manufacturing facilities strategically located in the United tates, Mexico, France, India, and China; Responsive upport and ervice: From the design stage, planning to post-installation support, we re with you at every step, whether you need sales support or engineering expertise; On-time elivery: We support your logistical needs so you get the products when and where you need them; Warranty: We proudly stand behind our products. 1C004XE January Edition RG 401 /U RG 401 alu RG 402 /U RG 402 tin RG 402 silver RG 402 alu RG 402 non m. RG 405 /U RG 405 tin RG 405 alu RG 405 non m..047".047" tin Hand-formable cable 1.63 (.064) 2.95 (.116) 2.98 (.117) 2.98 (.117) tin soaked braid tin soaked braid FEP jacket LZH jacket Certifications and Environmental Corrugated cables (with helical or ringed/annular copper tube) Flexible Flexible Flexible Flexible Flexible uper flexible uper flexible uper flexible uper flexible 1/4" 1/2" 7/8" 1 1/4" 1 5/8" 1/4" 3/8" 1/2" 7/8" Note: = single braid. = dual braid. tube 2.38 (.094) 4.80 (.189) 9.13 (.359) 12.7 (.0) 17.3 (.681) 1.90 (.075) 2.60 (.102) 3.60 (.142) 9.04 (.356) 6.40 (.252) 11.6 (.457) 22.5 (.866) 32.5 (1.28) 43.5 (1.71) 4.70 (.185) 6.30 (.248) 8.70 (.343) (.930) (.343) (.644) 27.7 (1.091) 39.5 (1.55).5 (1.99) 7.40 (.291) 10.8 (.425) 13.2 (.520) (1.082) na C na na na C C C C Coaxial, rf & microwave ringed/annular tube ringed/annular tube ringed/annular tube ringed/annular tube ringed/annular tube helical tube helical tube helical tube helical tube Full Line Catalog Radiall is IO 9001: 2008 certified and dedicated to continuous improvement programs that have resulted in also being A9100, T16949 and IO certified. In addition, Radiall is committed to investing in its people, future technologies and the environment, such as being RoH (Restriction of Hazardous ubstances) and REACH (Registration, Evaluation, Authorization and Restriction of Chemical substances) compliant. For more information about cables manufactured by Radiall, please consult our online catalog. Radiall is a global leader in the design, development and manufacturing of leading edge interconnect solutions. edicated to understanding its customers needs since 1952, Radiall has earned the reputation of being the best of the best in engineering ingenuity by providing a constant flow of creative system solutions serving the telecommunications, aerospace, defense, instrumentation, automotive, industrial, medical and broadcast markets. The Best End-to-End Interconnect olutions PVC jacket PVC jacket Flexible cable BT approved 1.6 (.063) 1.95 (.077) 2.5 (.098) Company Profile Coaxial, rf & microwave
Our Most Important Connection is with You. SECTION 17. Tooling & Accessories R280 / R282
SECTION 17 Tooling & Accessories R280 / R282 Contents Joule effect soldering devices... 17-4 Stripping tools...17-4 and 17-7 Point gauges... 17-4 Soldering... 17-5 Installation tools...17-5 to 17-6 Cassettes...
Tooling CONTENTS PAGE
CONTENTS PAGE Joule effect soldering devices... 3 Stripping tools...4-6 Pointer gauges... 7 Soldering & assembly tools...8-10 Installation tools...11-12 Tool kits for semi-rigid and flexible cables...13-22
MMBX / MCX series R223 / R113 / R213
4 MMBX / MCX series R223 / R113 / R213 CONTENT Pages MMBX Introduction... 4-4 to 4-6 Interface... 4-7 Characteristics... 4-8 Plugs... 4-9 Receptacles... 4-9 to 4-10 Adapters... 4-11 emo board... 4-12
SMA CONTENTS PAGE 9-3
CONTENTS PAGE SMA Introduction... 4 General... 5 Finder guide...6-7 Interface... 8 Characteristics...9-10 Straight plugs...11-12 Right angle plugs...13-14 Straight jacks... 14 Straight flange jacks...14-15
SMB LOCK Introduction Characteristics Straight plugs Right angle plugs SMB limited detent (SMB-A) Receptacles...
CONTENTS PAGE SMB Introduction... 4 General... 5 Finder guide... 6 Interface... 7 Characteristics...8-9 Straight plugs...0- Right angle plugs...- Jacks... 3 Bulkhead jacks...4-5 Receptacles...6-7 PCB receptacles...
Our Most Important Connection is with You. SECTION 2 SMPM / SMP / SMP-LOCK / SMP-COM R201 / R222 / R222L / R2229
SECTION 2 SMPM / SMP / SMP-LOCK / SMP-COM R201 / R222 / R222L / R2229 Contents SMPM Introduction... 2-4 Interface... 2-5 Characteristics... 2-6 Plugs and Jacks... 2-7 Receptacles and panel shrouds... 2-8
... A Vital Part of Connection World CMPTER. Cable Connectors PCB Connectors Assembly Instructions Mounting Holes MCX CONNECTORS
... A Vital Part of Connection World Cable Connectors PCB Connectors s Mounting Holes MCX CONNECTORS COPYRIGHT ELECTRONICS 0 MCX Series Coaxial Connectors DESCRIPTION MCX connector are developed in Europe
SERIES BMA, SUBMINIATURE BLIND MATE CONNECTORS
SERIES, SUBMINIATURE BLIND MATE CONNECTORS DESCRIPTION CONTENTS PAGE HUBER+SUHNER blind mate connectors open up special dimensions in microwave applications up to 18 GHz. HUBER+SUHNER offers a range of
EN3716 SAE AS81659 ARINC
6 DSX RTX Series series SAE AS81659 EN3716 ARINC 404 Page Introduction... 6-4 Applications... 6-5 DSX SAE AS81659 Product overview... 6-6 Technical characteristics :... 6-7 & 6-8 Electrical... 6-7 Mechanical
BLINDMATE CONNECTORS AND COMPONENTS. Selection Guide BMA BMMA BMZ BZ
BLINDMATE CONNECTORS AND COMPONENTS SV Microwave, Inc. is a world leader in the RF/microwave industry. We design and manufacture coaxial connectors, cable assemblies, attenuators, terminations, and custom
RP SMA Female Connector Crimp/Solder Attachment For RG178, RG196
RP SMA Female Connector Crimp/Solder Attachment For RG178, RG196 TECHNICAL DATA SHEET PE4799 RP SMA Female Connector Crimp/Solder Attachment For RG178, RG196 Configuration Connector Connector Specification
MCX Amphenol. Description MCX. 50 Ohm Coaxial Connectors Specifications 18 Straight & Right Angle Crimp 19 Straight Solder & PCB 20-21
Description connectors conform to the European CECC 22220 Spec and was introduced in the 1980 s. While the uses identical inner contact and insulator dimensions as the SMB, the outer diameter of the plug
Distributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. Connectors Features Snap-on interface facilitates assembly Conforms to CECC
SERIES MHV (H4) HIGH VOLTAGE CONNECTORS
SERIES MHV (H4) HIGH VOLTAGE CONNECTORS DESCRIPTION CONTENTS PAGE HUBER+SUHNER MHV connectors are coaxial miniature high voltage (MHV = Miniature High Voltage) connectors with 5 kv rms test voltage (mated
MMC RTX series EN3716
MMC RTX series EN3716 7 CONTENTS Page Introduction... 7-4 Application 7-4 Features... 7-4 Product overview... 7-5 Electrical characteristics... 7-6 Mechanical & environmental characteristics... 7-6 Products
SMB Amphenol. 50 ohm Coaxial Connectors Specifications 36 Plugs 37 Jacks 38 Bulkhead Receptacles PCB Receptacles 41-43
Description The name derives from SubMiniature B (the second subminiature design). The was developed in the 1960 s. is a smaller version of the SMA with snap-on coupling. Amphenol s connectors conform
RF COAXIAL CONNECTORS, TYPE SMA, 50 OHMS (FEMALE CONTACT) ESCC Detail Specification No. 3402/002
Page 1 of 106 RF COAXIAL CONNECTORS, TYPE SMA, 50 OHMS (FEMALE CONTACT) ESCC Detail Specification Issue 5 June 2016 Document Custodian: European Space Agency see https://escies.org PAGE 2 LEGAL DISCLAIMER
RP SMA Male Connector Crimp/Solder Attachment for RG174, RG316, RG188, PE-B100, PE-C100, inch, LMR-100
RP SMA Male Connector Crimp/Solder Attachment for RG174, RG316, RG188, PE-B100, PE-C100, 0100 inch, LMR-100 RF Connectors Technical Data Sheet PE4771 Configuration SMA Male Reverse Polarity Connector MIL-STD-348
Interface Mating Dimensions
SMP Coaxial Connectors SMP Coaxial Connectors SMP Connectors Interface SMPM Cable Connectors SV Microwave offers a complete line of SMP connectors that conform to DSCC 94007, 94008 and MIL-STD-348. The
RF COAXIAL CONNECTORS, TYPE SMA, 50 OHMS (MALE CONTACT) ESCC Detail Specification No. 3402/001
Page 1 of 68 RF COAXIAL CONNECTORS, TYPE SMA, 50 OHMS (MALE CONTACT) ESCC Detail Specification Issue 3 January 2014 Document Custodian: European Space Agency see https://escies.org PAGE 2 LEGAL DISCLAIMER
Interface Mating Dimensions
SMPM Coaxial Connectors SMPM Connectors DC - 65 GHz SV Microwave offers a complete line of SMPM connectors. SMPM connectors, a push-on mating design, provide microwave performance through 65 GHz and offer
smpm connectors DIVIDER PAGE
connectors DIVIDER PAGE 95 interfaces socket (adapter).068 MIN..023 CONTACT ACCEPTS.012 +/-.001 PIN x.050 LONG.110.095 CENTER CONTACT FLUSH TO.008 RECESSION FEMALE, JACK pin (shroud) Mil-Std-348A Fig.
General characteristics and technical data Series MCS
MOD M MC MCS VP 100 S Operating voltage up to 5 kvdc Operating current up to 4,5 A 2-6 high voltage contacts Quick and easy assembling Protection class IP68 acc. DIN EN 60529 General characteristics and
Amphenol. eries SJT. Series SJT. VG 96912, Series 1 PAN JN 1003
Amphenol eries SJT Series SJT VG 96912, Series 1 PAN 6433-2 JN 1003 Ordering information Ordering example: SJT G 06 RT 14-35 P A 014 Series (p. 9, 15, 18) SJT Scoop proof (100% scoop-proof) Junior (Miniature
Voice/Data/ Video Tools
Voice/Data/ Video Tools Professionals prefer Klein's high quality materials and construction for durable long-lasting tools. Klein VDV Tools provide time savings and reliability, especially in high-volume
CABLES FOR AUTOMOTIVE MARKET Sensor and multimedia cables. Catalogue
CABLES FOR AUTOMOTIVE MARKET Sensor and multimedia cables Catalogue Introduction Nexans has developed a range of special and customised cables for the automotive market. This cable range covers two main
PROTECTRON MONITORING CONNECTOR SYSTEM
MONITORING CONNECTOR SYSTEM 1MM VERTICL JCK TIP (TEST POINT) 1mm Vertical Jack Tip Insulated Conical Type P8001 : 5 max. : 5mW max. Insulation Resistance : 1000MW min. Dielectric Withstanding : 500V C
Table of Contents SMA CONNECTORS
Table of Contents 45 SMA Connectors 3 MMCX Connectors 50 Ohm Connectors Specifications...46 Quick Connect...49 Semi-Rigid & Flexible Cable...50 PC Mount...56 Bulkhead & Panel Mount...62 Self-Fixture End
SMC SERIES Subminiature Coaxial Connectors
SERIES Subminiature Coaxial Connectors FEATURES Subminiature coaxial connectors with 50 Ω impedance for applications up to 0 GHz. (screw on mechanism)fulfills the subminiature coaxial connector requirement
ArcTite. single path to optimal performance. Ultra-low profile bends
ArcTite brochure_8-pages_011918_r3.qxp_layout 1 1/20/18 12:13 PM Page 1 www.dynawave.com single path to optimal performance ArcTite assemblies maintain electrical performance even after bending...ensuring
Amphenol RF Interconnects
1.6/5.6 Miniature 75 ohm coaxial connectors continued Right Angle Bulkhead Jack for PCB Plug to Plug Adapter Plug to Plug U Link Adapter 1566252M1N3GT3G75 1562071A1N3GT3G75 1562076A1N3GT3G75 1566252M01RFX
MIL-PRF type fiber optic termini F722 - F724
MIL-PRF-29504 type fiber optic termini F722 - F724 CONTENTS Introduction... 8-4 Characteristics and performance...8-5 Product range...8-5 to 8-6 Pages MIL-PRF-29504 type fiber optic termini 8-3 MIL-PRF-29504
TE Connectivity DEUTSCH Single Module EN4165 connectors
Applications Cabin and avionic systems High-performance military aircraft Commercial airlines Communications equipment Missiles Military Railway TE Connectivity DEUTSCH Single Module EN4165 Connectors
High Performance, Microminiature Circular Connectors
High Performance, Microminiature Circular Connectors HR25 Series Mated dimensions 3. Diagrams of Connectors in Combination Features Solder type plug (HR25-*TP-**) Crimp type plug (HR25-9TP-**C) 1. Small,
High Performance, Microminiature Circular Connectors
High Performance, Microminiature Circular Connectors HR25 Series Mated dimensions 3. 35. Diagrams of Connectors in Combination Solder type plug (HR25-*TP-**) Crimp type plug (HR25-9TP-**C) Solder type
RF Coaxial Connectors SMZ (Type 43)
SMZ (Type 43) Introduction The ITT Cannon range of SMZ connectors are extensively used in 75 communication systems and have become the recognised standard in telecommunications in many parts of the world.
Operating voltage up to 5 kvdc Operating current up to 4,5 A 2-6 high voltage contacts Quick and easy assembling Protection class IP68 acc.
Operating voltage up to 5 kvdc Operating current up to 4,5 A 2-6 high voltage contacts Quick and easy assembling Protection class IP68 acc. DIN EN 60529 General characteristics and technical data Series
SMB Connectors Specifications Flexible Cable Bulkhead PCB Mount... 66
Section Index Connectors Specifications... 62 Flexible Cable... 64 Bulkhead... 65 PCB Mount... 66 Other Information Assembly Instructions... 176 Cable Assembly... 166 Cable Information... 168 Numerical
I Non-magnetic D-Sub Connectors
Non magnetic D-Sub Connectors Section I Non-magnetic D-Sub Connectors 5 Non magnetic D-Sub Contents Non magnetic D-Sub Connectors Cross reference table for ESA/SCC/SOURIAU/GSFC...7 Quality Assurance Testing...7
D-Subminiature EMI/RFI Shielding Interconnection Systems
Amphenol Amphenol PCD Shenzhen D-Subminiature EMI/RFI Shielding Interconnection Systems www.amphenolpcd.com.cn Product profile RR-HR D-Sub connectors - stamped and formed contacts REAR RELEASE CRIMP CONNECTORS
HARTING. Interface Connectors. People Power Partnership
11 4 HARTING Interface Connectors People Power Partnership People Power Partnership Quality Connections Worldwide HARTING was founded in 1945 by the family that still owns the company. Today, HARTING employs
Castellated/Hex Nut. Insert Retaining Ring. Contact Insert
Castellated/Hex Nut Seals Snap-on Connection for Flexible Straps & Covers Insert Retaining Ring Contact Insert Sealing Cap Clip Gland Cage Insert Retaining Ring Contact Insert Locking Ring Flex Body Moulding
RF Coaxial Connectors
SSMB/SSMC Introduction This range of 50 ohm microminiature radio frequency connectors is suitable for both military and commercial equipment operating at frequencies up to 4 GHz (SSMB) and 12.4 GHz (SSMC).
onlinecomponents.com
Description Amphenol connectors are used in applications where maximum RF shielding and minimum noise radiation are required. Features/Benefits Available in 7/8-20 and 11/16-24 threading, C, BNC and TNC
Triax Amphenol. Description Amphenol Triax connectors are used in applications where maximum RF shielding and minimum noise radiation are required.
Description Amphenol connectors are used in applications where maximum RF shielding and minimum noise radiation are required. Features/Benefits Available in 7/8-20 and 11/16-24 threading, C, BNC and TNC
Type N connectors DIVIDER PAGE
Type N connectors DIVIDER PAGE 179 N interface dimensions E D REF. PLANE REF. PLANE C D ØF ØB ØA ØA ØB ØE SEALING GASKET.625-24UNEF-2B G C H MIN. FULL H J F G MIN. FULL "N", MALE, Mil-Std-348A Fig. 304.1.140.110
SMA. Hermetic RADIALL COMPANY PROFILE RESEARCH & DEVELOPMENT MANUFACTURING
RADIALL COMPANY PROFILE Since 1952, RADIALL has specialized in the field of coaxial connectors and cables assemblies. RADIALL s experience and high technology focus, combined with our large worldwide production
SJT Series. Amphenol. Aerospace. Amphenol
eries TABE OF CONTENT - coop-proof Design of JT eries & tandard Mounting Dimensions of JT eries - Meet European pecification Applications Features, pecifications................... 98 How to Order, Rotations...............
Contact resistance : environmental class hermetic class size 20 1 mω 7 mω size mω 3.8 mω size mω 2.4 mω
8525 eries pplications or all general purposes in civil aeronautical applications tandards N 934 H 32 NL 5413 N 3646 M T1 list LN 2954 escription Light weight version of MIL 26482 eries II Intermateable
INTRO FFC - Flat Flexible Cables Nicomatic s Flat Flexible Cable consists of tin plated copper conductors laminated between polyester films with a the
FLAT FLEXIBLE CABLES STANDARD PRODUCTS Nicomatic FFC cables are used in board to board interconnections and can be solderded or used with ZIF/LIF FFC VALUE ADDED OPTIONS Laser & die cutting, bends creasing,
Standard Buccaneer IP68 BUCCANEER FOR POWER BUCCANEER POWER
IP68 Castellated/Hex Nut Seals Snap-on Connection for Flexible Straps & Covers Insert Retaining Ring Insert Retaining Ring Contact Insert Locking Ring Flex Body Moulding Contact Insert Sealing Cap Clip
ASSEMBLY, INSTALLATION, AND REMOVAL OF CONTACTS AND MODULES
ASSEMBLY, INSTALLATION, AND REMOVAL OF CONTACTS AND MODULES FOR MICRO COAXIAL CONTACTS AND MODULES TABLE OF CONTENTS SECTION 1 RECEIVER CONTACT ASSEMBLY INSTRUCTIONS SECTION 2 ITA CONTACT ASSEMBLY INSTRUCTIONS
MCX Connectors Specifications Flexible Cable Semi-Rigid Cable Panel Mount PCB Mount... 22
Section Index Connectors Specifications... 17 Flexible Cable... 19 Semi-Rigid Cable... 20 Panel Mount... 21 PCB Mount... 22 Other Information Assembly Instructions... 176 Cable Assembly... 166 Cable Information...
800 Pin Receiver and ITA Modules and Contacts 2
TABLE OF CONTENTS 800 Pin Signal Module 800 Pin Receiver and ITA Modules and Contacts 2 Interface Devices (IDs) CASS Receiver 4 Light Weight CASS Receiver 5 80 Series Receiver 6 CASS Connector Module Configuration
CONNECTOR SERIES. PCB High Density Connectors
MHD/mdd/mdp CONNECTOR SERIES PCB High Density Connectors Hyperboloid Technology Smiths Connectors offers an extensive range of superior contact technologies suitable for standard and custom solutions.
PPT 802, Proximity Probe Transducer System
PPT 802, Proximity Probe Transducer System PPH 080 : Proximity Probe Head PEC 036 : Probe Extension Cable PRD 020 : Proximity Probe Driver Feature Non-contacting measurement system based on eddy current
Contact resistance : environmental class hermetic class
525 eries pplications or all general purposes in civil aeronautical applications tandards N 93422 32 NL 5413 N 1599 M T1 list LN 2954 escription Light weight version of MIL 2642 eries II Intermateable
Luminus Series Amphenol Pcd
Luminus Series Amphenol Pcd Amphenol Pcd Pcd is is one one of of the the world s leading suppliers of of interconnect products for for Military, Commercial Aerospace and and Industrial applications. Located
AXON. Innovative Interconnect Solutions
AXON Innovative Interconnect Solutions SUMMARY THE AXON GROUP OUR TECHNOLOGICAL EXPERTISE IN MATERIALS OUR PRODUCT EXPERTISE QUALITY OUR PROCESS EXPERTISE «GREY MATTER» PROJECT TEAMS THE RESULT OF INNOVATION
Broadcast. Use Solid Reliability. Return Loss Graph Lo-Pro. Environmental. Electrical. Contact. millohm
Tri-Loc Series Standardd & Lo-Pro Connectors Jacks and Plug ugs Lo-Pro Tri-Loc Connectors Full Crimp Procedure Broadcast Ideally Suited for Outdoor Use Solid Reliability Point-To-Point Solutions Specifications
8STA/8TA Series. Compact Circular Connectors Derived from MIL-DTL & JN1003. Connection Technologies
8STA/8TA Series Compact Circular Connectors Derived from MIL-DTL-38999 & JN1003 Connection Technologies 8STA/8TA Series Contents Overview Presentation... 06 Applications... 06 Features & benefits... 07
Solder Assembly Kit
ORIGINAL INSTRUCTIONS Solder Assembly Kit 1055420-1 Instruction Sheet 408-8677 30 APR 17 Rev C 10 12 1. INTRODUCTION Item Number TE Part Number Description Qty Per Assy 1 1055441-1 Inserts 1 2 1055440-1
MicroMate (MMCX) Amphenol Specifications
Specifications ELECTRICAL CECC22000 Test Requirement Impedance 50 Ohm Frequency Range DC thru 6 GHz VSWR 4.4.1 SMT and Edgecard (Mated Pair) DC - 4 GHz 1.15 Max 4-6 GHz 1.40 Max Cabled Straight, Semi-Rigid
JUL 17 Rev M
Hand Crimping Tool and Cable Preparation Kit; PN 59981-1 Instruction Sheet 408-6788 24 JUL 17 Rev M PROPER USE GUIDELINES Cumulative Trauma Disorders can result from the prolonged use of manually powered
Assembly Instructions-C70 Amphenol MMCX
Assembly Instructions-C70 Amphenol All parts of the connector are shown. Strip the inner conuctor, ielectric, an jacket as per RECOMMENDED CABLE STRIPPING DIM S in catalog. Slie the INSULATOR onto inner
General characteristics
Multipole Industrial Connectors General characteristics The multipole connectors for industrial purposes are used in electric and electronic machinery, robots, electric panels, control equipments and wherever
CONEC provides reliable and effective solutions to OEM, EMS and cable houses.
CONEC CANADA USA CONEC designs and manufactures products in modern facilities. The products are made in accordance to the highest quality standards and industry specifications. CONEC provides reliable
17 TW SERIES. Hybrid Connector SPECIFICATIONS: MATERIALS AND PLATINGS ELECTRICAL DATA CLIMATIC DATA MECHANICAL DATA
17 TW SERIES Hybrid onnector mphenol s 17TW series hybrid -Subminiature connectors are available with power, coax, high voltage and signal contacts assembled in the same connector body. These connectors
75 Ω BNC Style Connector
7 Ω BNC Style Connector Frequency Range Characteristic Impedance 7 Ω FETURE 7 Ω of BNC style connector BNC style connectors can be mated. Bayonet coupling mechanism for reliable connection. ock Type Bayonet
Bodies Brass Nickel or Gold Gold Female: Beryllium copper Insulator Teflon N/A Crimp ferrule Annealed copper Nickel or Gold
Materials Connector part Material Finish Bodies Brass Nickel or Gold Center Contact Male: Brass Gold Female: Beryllium copper Insulator Teflon N/A Crimp ferrule Annealed copper Nickel or Gold Electrical
1000 Series Miniature Slide Switches
Miniature Switches Features/Benefits Variety of actuators and terminations Panel mount tabs available Epoxy terminal seal compatible with bottom-wash cleaning RoHS compliant Typical Applications Test &
Amphenol-Tuchel Electronics 44 Series
44 Series Amphenol-Tuchel Electronics 44 Series Cost-effective environmental sealing Amphenol Tuchel 44 series connectors offer cost-effective performance for applications requiring environmental sealing.
Wiring Assembly Instructions Section 5 P/N CASS P/N 1899AS RG316 P/N CASS P/N 1899AS RG316
Ver. 2.7 CASS USER S MANUAL VPC Tools Required For the assembly of the Mini-Coaxial Contact(s) VPC P/N 610 103 115/CASS P/N 1899AS284-01 and/or P/N 610 103 159/1899AS284-04 the following parts are required
FAKRA Jack Right Angle Connector Crimp/Solder Attachment for RG174, RG316, RG188,.100 inch, PE-B100, PE-C100, LMR-100, White Color
FAKRA Jack Right Angle Connector Crimp/Solder Attachment for RG174, RG316, RG188, 100 inch, PE-B100, PE-C100, LMR-100, White Color PE44648B Configuration FAKRA Jack Connector 50 Ohms Right Angle Body Geometry
LifeSense Hose. Part Number Nomenclature EC ft EC Cut Length Hose. Base Hose Number. Hose Size. Bulk Hose. Hose Length.
LIFESENSE WIRE LifeSense Hose Part Number Nomenclature Base Hose Number/Hose Type Hose size (in 16ths of an inch) Base Hose Number The base hose number is simply the type of LifeSense hose you wish to
KA Series. MIL-DTL Compliant PCB connectors
MIL-DTL-55302 Compliant connectors Hypertac Hyperboloid Technology Smiths Interconnect offers an extensive range of superior contact technologies suitable for standard and custom solutions. Hypertac (HYPERboloid
Shell material Insulator Contacts Sealing Temperature Mating Protection
Technical Data Shell material Machined components: die cast components: Shell plating: Cable entry: Copper-Zinc alloy (CuZn) Zinc (GD-Zn) Nickel (Ni) plated max. 10 mm Insulator Connector inserts: Polyamid
C&K 1000 Series Miniature Slide Switches
Miniature Switches Features/Benefits Variety of actuators and terminations Panel mount tabs available Epoxy terminal seal compatible with bottom-wash cleaning RoHS compliant Typical Applications Test &
Water-Proof Connectors
Water-Proof Connectors Edac s waterproof Wire-to-Wire and Wire-to-Board series was designed for both extreme moisture and nonsubmersion applications supporting both low-level signal and power applications
Electrical Test voltage (Vrms) Service sea level at m M I II
8LT eries Applications High density connectors for all military and aeronautical purposes. tandards MIL-C 38999 eries I - QPL approved NC 93422 HE 308 DTAT-C 5935 X 0005 (HE 308 standard) GAM/T1 list Description
CA-COM Industrial Connectors
CA-COM Industrial Connectors ITT Corporation ITT is a diversified leading manufacturer of highly engineered critical components and customized technology solutions for the energy, transportation and industrial
Amphenol. Amphenol GT Series Reverse Bayonet Coupling Connectors. Ruggedized Connector Series for Rail/Mass Transit and other Harsh Environments
Amphenol GT eries Reverse Bayonet Coupling Connectors 12-024-7 Ruggedized Connector eries for Rail/ass Transit and other Harsh Environments Amphenol Table of Contents age o. Amphenol GT eries Reversed
ITT Cannon KJL Series MIL-DTL Series I Connectors
APPLICATIONS FEATURES ITT Cannon KJL Series MIL-DTL-38999 Series I Connectors High performance military aircraft Commercial airlines Communications equipment Armored personnel carriers & tanks QUICK-MATING
Connectors Type M DIN / IEC Catalog E /01 Edition 1
Connectors Type M DIN 41612 / IEC 60603-2 www.erni.com www.erni.com Contents General Information 3 Electrical & Mechanical Specifications for Connectors 4 Standard Male Connectors for Daughtercards 6 Standard
Multi-Flex Low Loss, Pre-Connectorized Cable Sets, DC~18 GHz, MF02-Series
MultiFlex Low Loss, PreConnectorized Cable Sets, DC~18, MF02Series for rugged military, defense and T&M applications upto 18 use reliable performance, dependable service MF02Series Preconnectorized Cable
MIL-PRF QPL Connectors MIL-PRF QPL Adapters Online Catalog Volume 1
MIL-PRF-39012 QPL onnectors MIL-PRF-55339 QPL dapters Online atalog Volume 1 Delta QPL connectors and adapters meet or exceed all requirements of MIL-PRF-39012 and MIL-PRF-55339. ecause these specifications
THREADED & BAYONET CONNECTORS FOR DEMANDING ENVIRONMENTS
MILITARY AND COMMERCIAL AVIATION MIL - DTL - 83723 SERIES III THREADED & BAYONET CONNECTORS FOR DEMANDING ENVIRONMENTS CONNECTORS FOR DEMANDING ENVIRONMENTS THREADED AND BAYONET MILITARY AND COMMERCIAL
HBB power connector. Product description
HBB power connector Product description Contact technology guarantees high reliability Push lock to mate connector Quick release latch to unmate Ruggedised metal and plastic versions available Cable and
FEATURES. ~ Compression resistant low loss, low density dielectric. ~ Quadraform shielding. ~ Highly reliable soldered connections
TRUE BLUE Low Loss cable assemblies The Answer: An unmatched combination of low loss, durability, and value. The Question: What does Storm s True Blue line of cable assemblies provide? For more than 30
BNC75 Receptacle Connector for Broadcast
BNC Receptacle Connector for Broadcast BNC Series for 12G-SDI Characteristic Impedance Ω Lock Type Bayonet OUTLINE BNC series for broadcasting equipment is a high performance Ω connector which is compliant
NTC Thermistor Assemblies
FEATURES Standard and custom assemblies are available in a variety of configurations Assemblies can conveniently attach to or be an integral part of any system to monitor or control temperature No added
Amphenol 97 Series MIL-DTL-5015
Amphenol 97 Series MIL-DTL-5015 MATES WITH ALL THREADED MIL-DTL-5015 CONNECTORS The 97 series is a durable, cost-effective MIL-DTL-5015 available in a variety of shell styles, sizes, contacts, and layouts.
AMPLIMITE Cable Connector Accessories
MPLIMITE Cable Connector ccessories Quick Reference Guide We offer one of the broadest, most versatile portfolios of Dsubminiature connectors in the market with unrivaled engineering support to address
AMPLIMITE.050 Series Cable Assemblies, Series III
Cable Assemblies, Series III To meet Standard Applications the following 106 ohm, black jacketed cable assemblies are available. For AMPLIMITE Series cable assemblies that meet other impedance requirements
Cheminax RF Coaxial Cables and RF Connectors
Cheminax RF Coaxial Cables and RF Connectors QUICK REFERENCE GUIDE Convenient Lightweight, small diameter Extended temperature range High Performance High flexibility Low capacitance Low attenuation HIGHER
SMA Male Connector Solder Attachment for RG188-DS, RG316-DS
SMA Male Connector Solder Attachment for RG188-DS, RG316-DS RF Connectors Technical Data Sheet PE4402 Configuration SMA Male Connector MIL-STD-348A 50 Ohms Straight Body Geometry Features Max Operating
Varicon. Series " x.130" x.150" Grid Pattern FEATURES TECHNICAL SPECIFICATIONS
Series 8016.075" x.130" x.150" Grid Pattern FEATURES Available in five sizes: 20, 38, 56, 90 and 120 contacts Insertable / removable Varilok contacts Crimp, solder, solderless wrap, and taper tab terminations
SMPM. SMPM High Frequency Push-on. Module to Module (board to board) Misalignment. Application Notes SMPM
29 High Frequency Push-on Application Notes The connector, which is 30% smaller than its cousin, the, has similar features and applications. This is a multi-functional high frequency push-on connector
Varicon. Series " x.130" x.150" Grid Pattern FEATURES TECHNICAL SPECIFICATIONS
Series 8016.075" x.130" x.150" Grid Pattern FEATURES Available in five sizes: 20, 38, 56, 90 and 120 contacts Insertable / removable Varilok contacts Crimp, solder, solderless wrap, and taper tab terminations
Multipole Low Voltage Connectors
Connectors 4 Introduction Key Features Wide range of body styles and sizes Unsealed, sealed or hermetic etic Signal or power Multipole up to 55 contacts Up to 30 A Standard or inverted polarity Solder,