BNC75 Receptacle Connector for Broadcast
|
|
- Aileen Collins
- 5 years ago
- Views:
Transcription
1 BNC Receptacle Connector for Broadcast BNC Series for 12G-SDI Characteristic Impedance Ω Lock Type Bayonet OUTLINE BNC series for broadcasting equipment is a high performance Ω connector which is compliant with the 12G-SDI standard by improving impedance matching of the conventional product. APPLICATIONS Broadcast equipment (Switcher, Professional video camera, Monitor) FEATURES Excellent high-frequency characteristics(12g-sdi compliant) Angle type and straight type are available. CONNECTOR TYPES Angle type for PCB (Automatic mounting): 2 ~ 3 page Angle type for PCB (Manual mounting) : 4 ~ 6 page Straight type for PCB(Manual mounting) : ~ page 11
2 BNC Series for 12G-SDI Angle type for PCB (Automatic mounting) OUTLINE Hybrid type utilized advantage of angle type and edge mounting type Excellent high-frequency characteristics in the industry APPLICATIONS Hybrid type Broadcast equipment (Switcher, Professional video camera, Monitor) FEATURES Angle type <Advantage> Ease mouting <Disadvantage> Tendency of poor high frequency characteristics High complexity and high cost Resolve both disadvantages! Edge mouting type <Advantage> Good characteristics Easy structure and low cost <Disadvantage> No positioning mouting part Excellent high-frequency characteristics(12g-sdi compliant) The protrusions of the mounting part improve the positional accuracy (Patent pending). Significant weight saving(less than % in comparison with our conventional angle type) High-frequency characteristic Automatic mounting Return Loss db Return Loss(BNC-LR1-PCE) 12G-SDI spec BNC-LR1-PCE Frequency GHz Adsorption surface! Automatic PCB Through hole Ensure adequate solder area! PCB Mounting part This protrusions improve the positional accuracy! SPECIFICATIONS Characteristic Impedance Ω Frequency Range 12GHz Max. Rated Voltage ACV(r.m.s.) Dielectric Withstanding Voltage AC1,V(r.m.s.) / 1 minute Insulation Resistance 1,M Ω Min. at V DC 2dB Min.( ~ 3GHz) Return Loss 1dB Min.( ~ 12GHz) Operating Temperature -4 ~ + Item Contact Outer Contact Insulator Copper Alloy / Au Plating Zinc Alloy Die cast / Ni plating PTFE Specifications may vary depending on the connector. Please check the specifications before use. 2
3 BNC Series for 12G-SDI Angle type for PCB (Automatic mounting) BNC-LR1-PCE (Single) BNC-LR1-PCE BNC-LR1-PCE Ø (29) 13 2 Width across flats:9. Ø M (13.6) Ø Ø Panel mounting dimensions (t=2 Max.) Position of Body and contact:2. (Outer diameter of contact:ø.6) 4-Ø (Through hole inner diameter) 3(Pad dimention) Pad(Signal) End face of PCB 13 PCB mounting dimensions (t=2.6) BNC-2LR1-PCE (Double) BNC-2LR1-PCE M2.6.4 Ø11.2 Ø ±.1 Ø ± Ø1.9 6-Ø1.9.. (29) Ø ±.1 (29) Position of body and contact:2. 3 ±.1 (Outer diameter of contact:ø.6) 2 BNC-2LR1-PCE M Position of body and contact:2. (Outer diameter of contact:ø.6) Ø (Through hole inner diameter) ± ±. PCB mouting dimensions (t=2.6) (Through hole inner diameter) 16 ±.1 Panel mounting dimensions (t=2 Max.) Pad(Signal). 16 (.) Ø End face of PCB Ø ±.1 Panel mounting di 1 Pad(Signa (.) En
4 BNC Series for 12G-SDI Angle type for PCB (Manual mounting) OUTLINE High performance connector of angle type for PCB. Various variations are possible, because it is produced by machining. APPLICATIONS Broadcast equipment (Switcher, Professional video camera, Monitor) FEATURES Excellent high-frequency characteristics(12g-sdi compliant) Lineup of middle mount type and edge mount type (bulkhead) Return Loss db High-frequency characteristic Return Loss(BNC-LBR-PC-2) 12G-SDI spec BNC-LBR-PC Frequency GHz SPECIFICATIONS Characteristic Impedance Ω Frequency Range 12GHz Max. Rated Voltage ACV(r.m.s.) Dielectric Withstanding Voltage AC1,V(r.m.s.) / 1 minute Insulation Resistance 1,M Ω Min. at V DC 2dB Min.( ~ 3GHz) Return Loss 1dB Min.( ~ 12GHz) Operating Temperature -4 ~ + Item Contact Outer Contact Insulator Copper Alloy / Au Plating Copper Alloy / Ni plating PTFE Specifications may vary depending on the connector. Please check the specifications before use. 4
5 2 BNC-LBR-PC-2 BNC Series for 12G-SDI Angle type for PCB (Manual mounting) BNC-LBR-PC-2 (Middle mount type) Spring washer Hex nut BNC-LR1-PC (Middle mount type) (.2) M2.6.2 BNC-BR-PCE 1.4 Ø. (2.) 1. 2 Ø2. Ø Ø Ø /2-2UNEF-2A 14 HEX 16 Width across flats:11.1 Ø Ø2.2 Ø Panel mounting dimensions (t=2 Max.). PCB mounting dimensions (t=2.6 Max.) 2. Protruding dimension from the body end face:2.4 Spring washer Hex nut (9) 4-Ø1.6 Ø Ø11.4 Panel mounting dimensions (t=2 Max.) 3. End face of PCB.4 MAX. 2.6 PCB mounting dimensions (t=2 Max) Panel mounting dimensions (t=2.4)
6 BNC Series for 12G-SDI Angle type for PCB (Manual mounting) BNC-BR-PCE (Edge mount type) Outer diameter of contact:φ. Protruding dimension from the body end face:2.4 Spring washer Hex nut Ø16 Ø ± HEX 1. 1/2-2UNEF-2A 1. Ø (2) Panel mounting dimensions (t=2.4) 6
7 BNC Series for 12G-SDI Straight type for PCB (Manual mounting) OUTLINE High performance connector of straight type for PCB. Various variations are possible, because it is produced by machining. APPLICATIONS Broadcast equipment (Switcher, Professional video camera, Monitor) FEATURES Excellent high-frequency characteristics(12g-sdi compliant) Return Loss db High-frequency characteristic Return Loss(BNC-SR-PC) 12G-SDI spec BNC-SR-PC Frequency GHz Return Loss db High-frequency characteristic Return Loss(BNC-SR-PC-3) 12G-SDI spec BNC-SR-PC Frequency GHz SPECIFICATIONS Characteristic Impedance Ω Frequency Range 12GHz Max. Rated Voltage ACV(r.m.s.) Dielectric Withstanding Voltage AC1,V(r.m.s.) / 1 minute Insulation Resistance 1,M Ω Min. at V DC 2dB Min.( ~ 3GHz) Return Loss 1dB Min.( ~ 12GHz) Operating Temperature -4 ~ + Item Contact Outer Contact Insulator Copper Alloy / Au Plating Copper Alloy / Ni plating PTFE Specifications may vary depending on the connector. Please check the specifications before use.
8 BNC-SR-PC BNC Series for 12G-SDI BNC-SR-PC Straight type for PCB (Manual mounting) BNC-SR-PC (Outer contact: 3 pins) Ø Ø (1) Ø Ø1.2 PCB mounting dimensions (t=2.6 Max.) PCB mounting dimensions (t=2.6 Max.) BNC-SR-PC-3 BNC-SR-PC-3 (Outer contact: 4 pins) BNC-SR-PC Ø11.94 Ø PTH:4-Ø PTH:Ø. PCB mounting dimensions (t=1.6 Max.)
MCX Amphenol. Description MCX. 50 Ohm Coaxial Connectors Specifications 18 Straight & Right Angle Crimp 19 Straight Solder & PCB 20-21
Description connectors conform to the European CECC 22220 Spec and was introduced in the 1980 s. While the uses identical inner contact and insulator dimensions as the SMB, the outer diameter of the plug
More informationSMB Amphenol. 50 ohm Coaxial Connectors Specifications 36 Plugs 37 Jacks 38 Bulkhead Receptacles PCB Receptacles 41-43
Description The name derives from SubMiniature B (the second subminiature design). The was developed in the 1960 s. is a smaller version of the SMA with snap-on coupling. Amphenol s connectors conform
More informationv1.1 DP3 Series Input/Output Connector Thunderbolt Technology Compatible Connector Training Module Copyright 2013 JAE Electronics, Inc.
v1.1 DP3 Series Input/Output Connector Thunderbolt Technology Compatible Connector Training Module Application Examples Laptops, Desktops, Ultrabooks Audio/ Video editing equipment Display devices Adapter/
More information75 Ω BNC Style Connector
7 Ω BNC Style Connector Frequency Range Characteristic Impedance 7 Ω FETURE 7 Ω of BNC style connector BNC style connectors can be mated. Bayonet coupling mechanism for reliable connection. ock Type Bayonet
More informationDistributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. Connectors Features Snap-on interface facilitates assembly Conforms to CECC
More informationR Z18 Series : SMB CARLOCK
.. pn ao TECHNICAL DATA SHEET 1 / 7 EDGE CARD PIN IN PASTE VERSION All dimensions are in mm. COMPONENTS MATERIALS PLATING (µm) BODY CENTER CONTACT OUTER CONTACT INSULATOR GASKET OTHERS PARTS ZINC ALLOY
More informationCDM-K27W, CDM-J97W, CDM-K29W, CDM-K06W, CDM-K33W, CDM-L03
CDM-K27W, CDM-J97W, CDM-K29W, CDM-K06W, CDM-K33W, CDM-L03 Connectors FEATURES 1. Applicable to automotive antennas for radiofrequency signal transmission. 2. Include a die casting body (shell) that can
More informationSMB LOCK Introduction Characteristics Straight plugs Right angle plugs SMB limited detent (SMB-A) Receptacles...
CONTENTS PAGE SMB Introduction... 4 General... 5 Finder guide... 6 Interface... 7 Characteristics...8-9 Straight plugs...0- Right angle plugs...- Jacks... 3 Bulkhead jacks...4-5 Receptacles...6-7 PCB receptacles...
More informationConnector for Internal Serial Transmission. FI-R Series
COMPONENTS PRODUCT INFORMATION NEW Connector for Internal Serial Transmission FI-R CONNECTOR MB-0153-2 October 2008 RoHS Compliant High-speed serial transmission such as LVDS, TMDS (HDMI), and PCI Express
More informationSERIES MHV (H4) HIGH VOLTAGE CONNECTORS
SERIES MHV (H4) HIGH VOLTAGE CONNECTORS DESCRIPTION CONTENTS PAGE HUBER+SUHNER MHV connectors are coaxial miniature high voltage (MHV = Miniature High Voltage) connectors with 5 kv rms test voltage (mated
More informationAmphenol RF Interconnects
1.6/5.6 Miniature 75 ohm coaxial connectors continued Right Angle Bulkhead Jack for PCB Plug to Plug Adapter Plug to Plug U Link Adapter 1566252M1N3GT3G75 1562071A1N3GT3G75 1562076A1N3GT3G75 1566252M01RFX
More informationSMC SERIES Subminiature Coaxial Connectors
SERIES Subminiature Coaxial Connectors FEATURES Subminiature coaxial connectors with 50 Ω impedance for applications up to 0 GHz. (screw on mechanism)fulfills the subminiature coaxial connector requirement
More informationConnector for Internal Serial Transmission FI-R Series
COMPONENTS PRODUCT INFORMATION NEW Connector for Internal Serial Transmission FI-R CONNECTOR MB-0153-4 June 2013 RoHS Compliant High-speed serial transmission such as LVDS, TMDS (HDMI), and PCI Express
More informationBodies Brass Nickel or Gold Gold Female: Beryllium copper Insulator Teflon N/A Crimp ferrule Annealed copper Nickel or Gold
Materials Connector part Material Finish Bodies Brass Nickel or Gold Center Contact Male: Brass Gold Female: Beryllium copper Insulator Teflon N/A Crimp ferrule Annealed copper Nickel or Gold Electrical
More informationSERIES BMA, SUBMINIATURE BLIND MATE CONNECTORS
SERIES, SUBMINIATURE BLIND MATE CONNECTORS DESCRIPTION CONTENTS PAGE HUBER+SUHNER blind mate connectors open up special dimensions in microwave applications up to 18 GHz. HUBER+SUHNER offers a range of
More informationOur Most Important Connection is with You. SECTION 2 SMPM / SMP / SMP-LOCK / SMP-COM R201 / R222 / R222L / R2229
SECTION 2 SMPM / SMP / SMP-LOCK / SMP-COM R201 / R222 / R222L / R2229 Contents SMPM Introduction... 2-4 Interface... 2-5 Characteristics... 2-6 Plugs and Jacks... 2-7 Receptacles and panel shrouds... 2-8
More informationCompact Push-pull Circular Connector. JB5 Series. Plug
COMPONENTS PRODUCT INFORMATION NEW Compact Push-pull Circular Connector JB5 Series CONNECTOR MB-0101-2 January 2004 Receptacle Plug The JB5 Series connectors are compact circular connectors
More informationMMC RTX series EN3716
MMC RTX series EN3716 7 CONTENTS Page Introduction... 7-4 Application 7-4 Features... 7-4 Product overview... 7-5 Electrical characteristics... 7-6 Mechanical & environmental characteristics... 7-6 Products
More informationN Series. N Type Connectors CONFORMING STANDARD SPECIFICATION MATERIAL/FINISH JIS-C-5411 MIL-C-39012
N Type Connectors N series is the most practical coaxial cable connectors for 7mm (inner diameter of outer conductor) of 50Ω group. High frequency performance is superior. Many types of connectors are
More informationSMA CONTENTS PAGE 9-3
CONTENTS PAGE SMA Introduction... 4 General... 5 Finder guide...6-7 Interface... 8 Characteristics...9-10 Straight plugs...11-12 Right angle plugs...13-14 Straight jacks... 14 Straight flange jacks...14-15
More informationNov 7, 2006 DIELECTRIC CERAMIC FILTER SPECIFICATION 1 OF 9 SPECIFICATION ITEM: DIELECTRIC CERAMIC FILTER PART NUMBER: CF
Nov 7, 2006 DIELECTRIC CERAMIC FILTER SPECIFICATION 1 OF 9 SPECIFICATION ITEM: DIELECTRIC CERAMIC FILTER PART NUMBER: CF-19100328 4/14/06 Added recommended PCB layout and plots. 6/2/06 Added Tape and Reel
More informationDIELECTRIC CERAMIC FILTER SPECIFICATION 1 OF 6 SPECIFICATION COMMERCIALLY AVAILABLE. CERAMIC FILTER PART NUMBER: CF RoHS
DIELECTRIC CERAMIC FILTER SPECIFICATION 1 OF 6 SPECIFICATION COMMERCIALLY AVAILABLE CERAMIC FILTER PART NUMBER: CF-13501505 RoHS ISSUED CHECKED CHECKED CHECKED APPROVED 12/14/09 kn 10/25/12 DS 11/15/12
More informationDIELECTRIC CERAMIC FILTER SPECIFICATION 1 OF 6 SPECIFICATION COMMERCIALLY AVAILABLE. CERAMIC FILTER PART NUMBER: CF RoHS
DIELECTRIC CERAMIC FILTER SPECIFICATION 1 OF 6 SPECIFICATION COMMERCIALLY AVAILABLE CERAMIC FILTER PART NUMBER: CF-10000064 RoHS ISSUED / REVISION ENGINEER APPROVED DOCUMENT CHECKED DRAFTSMAN 1/31/11 DS
More informationSPECIFICATION COMMERCIALLY AVAILABLE CERAMIC BAND PASS FILTER PART NUMBER: CF RoHS ISSUED CHECKED CHECKED CHECKED APPROVED.
Page 1 of 6 SPECIFICATION COMMERCIALLY AVAILABLE CERAMIC BAND PASS FILTER PART NUMBER: CF-22500024 RoHS 12/7/09 Added Attenuation and graph 9/1/17 Added Recommended Solder Pattern ISSUED CHECKED CHECKED
More informationSPECIFICATION COMMERCIALLY AVAILABLE CERAMIC FILTER PART NUMBER: CF DOCUMENT CHECKED 9/28/11 DS 12/01/2011 TFG 12/01/2011 GL
DIELECTRIC CERAMIC FILTER SPECIFICATION 1 OF 6 SPECIFICATION COMMERCIALLY AVAILABLE CERAMIC FILTER PART NUMBER: CF-32002005 ISSUED / REVISION ENGINEER APPROVED DOCUMENT CHECKED DRAFTSMAN DOCUMENT CHECKED
More informationMini USB and USB 2.0-IP67 Connector System
Mini USB and USB 2.0-IP67 Connector System Section 12 Mini USB and USB 2.0-IP67 Connector System CONEC has added the Mini-USB connector. This Mini-USB IP67 receptacle and plug family, feature a bayonet
More informationModel C2023J5003A00. Ultra Low Profile db, 90 Hybrid Coupler
Model C223J53A Ultra Low Profile 85 3 db, 9 Hybrid Coupler Description The C223J53A is a low cost, low profile sub-miniature high performance 3 db coupler in an easy to use surface mount package. It is
More information2M805 Tri-Start Threaded Coupling
2M805 Tri-Start Threaded Coupling General Information 2M Specs 2M801 2M803 2M804 2M805 Series Micro Miniature Connectors: s 2M805 Series of connectors offers the best EMI and Vibration performance among
More informationSPECIFICATION COMMERCIALLY AVAILABLE. CERAMIC FILTER PART NUMBER: CF RoHS ISSUED / REVISION ENGINEER APPROVED DOCUMENT CHECKED DRAFTSMAN
DIELECTRIC CERAMIC FILTER SPECIFICATION 1 OF 6 SPECIFICATION COMMERCIALLY AVAILABLE CERAMIC FILTER PART NUMBER: CF-22505105 RoHS ISSUED / REVISION ENGINEER APPROVED DOCUMENT CHECKED DRAFTSMAN 7/6/07**
More informationPHONO JACKS * Please visit the product pages on our website for the most up-to-date product information 3501F 3501FP 3501FR 3514PC 3515PC
PHONO JACKS BULKHEAD PHONO JACKS 123 3501F 3501FP 3501FR 3514PC 3515PC 3517PC BPJR01 BPJF01 BPJJ01 3505F 3503 FEATURES AND BENEFITS Front or rear mount configurations Durable plated machined brass construction
More informationMCX Connectors Specifications Flexible Cable Semi-Rigid Cable Panel Mount PCB Mount... 22
Section Index Connectors Specifications... 17 Flexible Cable... 19 Semi-Rigid Cable... 20 Panel Mount... 21 PCB Mount... 22 Other Information Assembly Instructions... 176 Cable Assembly... 166 Cable Information...
More informationOur Most Important Connection is with You. SECTION 17. Tooling & Accessories R280 / R282
SECTION 17 Tooling & Accessories R280 / R282 Contents Joule effect soldering devices... 17-4 Stripping tools...17-4 and 17-7 Point gauges... 17-4 Soldering... 17-5 Installation tools...17-5 to 17-6 Cassettes...
More informationSPECIFICATION COMMERCIALLY AVAILABLE ITEM: DIELECTRIC CERAMIC FILTER PART NUMBER CF ROHS
DIELECTRIC CERAMIC FILTER SPECIFICATION 1 OF 6 SPECIFICATION COMMERCIALLY AVAILABLE ITEM: DIELECTRIC CERAMIC FILTER PART NUMBER CF-14871365 ROHS ISSUED / REVISION ENGINEER APPROVED DOCUMENT CHECKED DRAFTSMAN
More informationMicroMate (MMCX) Amphenol Specifications
Specifications ELECTRICAL CECC22000 Test Requirement Impedance 50 Ohm Frequency Range DC thru 6 GHz VSWR 4.4.1 SMT and Edgecard (Mated Pair) DC - 4 GHz 1.15 Max 4-6 GHz 1.40 Max Cabled Straight, Semi-Rigid
More informationInterface Mating Dimensions
SMP Coaxial Connectors SMP Coaxial Connectors SMP Connectors Interface SMPM Cable Connectors SV Microwave offers a complete line of SMP connectors that conform to DSCC 94007, 94008 and MIL-STD-348. The
More informationUltra Miniature Snap-on Coaxial Connector (PC Card Type 2 Mountable)
Ultra Miniature Snap-on Coaxial Connector (PC Card Type 2 Mountable) MMCX Series Right-angle Receptacle Features 1. Snap-on coupling mechanism makes it easy to engage and disengage. The rugged snap-on
More informationDATA-CON-X : SEALED USB TYPE A & B CONNECTORS
FEATURES & BENEFITS Sealed to IP67 & IP68 NEMA 250 (6P) (when mated) Feed-thru termination on the panel for easy field installation Field installable design is easy to assemble Quick connect bayonet or
More information... A Vital Part of Connection World CMPTER. Cable Connectors PCB Connectors Assembly Instructions Mounting Holes MCX CONNECTORS
... A Vital Part of Connection World Cable Connectors PCB Connectors s Mounting Holes MCX CONNECTORS COPYRIGHT ELECTRONICS 0 MCX Series Coaxial Connectors DESCRIPTION MCX connector are developed in Europe
More informationHigh Performance, Microminiature Circular Connectors
High Performance, Microminiature Circular Connectors HR25 Series Mated dimensions 3. 35. Diagrams of Connectors in Combination Solder type plug (HR25-*TP-**) Crimp type plug (HR25-9TP-**C) Solder type
More informationShell material Insulator Contacts Sealing Temperature Mating Protection
Technical Data Shell material Machined components: die cast components: Shell plating: Cable entry: Copper-Zinc alloy (CuZn) Zinc (GD-Zn) Nickel (Ni) plated max. 10 mm Insulator Connector inserts: Polyamid
More informationAMPLIMITE.050 Series Cable Assemblies, Series III
Cable Assemblies, Series III To meet Standard Applications the following 106 ohm, black jacketed cable assemblies are available. For AMPLIMITE Series cable assemblies that meet other impedance requirements
More informationASSEMBLY, INSTALLATION, AND REMOVAL OF CONTACTS AND MODULES
ASSEMBLY, INSTALLATION, AND REMOVAL OF CONTACTS AND MODULES FOR MICRO COAXIAL CONTACTS AND MODULES TABLE OF CONTENTS SECTION 1 RECEIVER CONTACT ASSEMBLY INSTRUCTIONS SECTION 2 ITA CONTACT ASSEMBLY INSTRUCTIONS
More information*HDMI-STYLE WEATHERTIGHT CONNECTORS *HDMI-STYLE WEATHERTIGHT CONNECTORS NPB C714
601 E WILDWOOD VILLA PARK, IL 60181 P: 630.834.7504 F: 630.834.8540 WWW.CONXALL.COM FEATURES & BENEFITS Sealed to IP67 & IP68 NEMA 250 (6P) (when panel connector is rear mounted and mated to the cable)
More informationSPECIFICATION FOR APPROVAL
FEB 25, 2004 CERAMIC DIPLEX FILTER SPECIFICATION 1 OF 6 SPECIFICATION FOR APPROVAL ITEM: CERAMIC DIPLEX FILTER PART NUMBER: CFD-122715756 ISSUED CHECKED CHECKED CHECKED APPROVED FILTRONETICS Inc FEB 25,
More informationBroadcast. Use Solid Reliability. Return Loss Graph Lo-Pro. Environmental. Electrical. Contact. millohm
Tri-Loc Series Standardd & Lo-Pro Connectors Jacks and Plug ugs Lo-Pro Tri-Loc Connectors Full Crimp Procedure Broadcast Ideally Suited for Outdoor Use Solid Reliability Point-To-Point Solutions Specifications
More informationAPPLICATION INFORMATION APPLICATION INFORMATION
RECOMMENDED BULKHEAD PANEL CUT-OUTS SCSI Fine Pitch Vertical PCB Mount NUMBER OF PANEL CUT-OUT DIMENSION TABLE POSITIONS B G H 26 31.2 (1.230) 29.8 (1.175) 27.6 (1.085) 40 40.1 (1.580) 38.7 (1.525) 36.5
More informationArcTite. single path to optimal performance. Ultra-low profile bends
ArcTite brochure_8-pages_011918_r3.qxp_layout 1 1/20/18 12:13 PM Page 1 www.dynawave.com single path to optimal performance ArcTite assemblies maintain electrical performance even after bending...ensuring
More informationAmphenol s 2M Micro38999 Connector Series The New Aerospace Standard
Tri-Start Threaded Coupling General Information Page Guide Order... C29 Weight... C30 Plugs... C31 In-Line... C32 Square Flange... C33 Jam Nut... C34 PCB Sq Flange... C35 PCBJam Nut... C36 PCB Double Flange.
More informationHigh Performance, Microminiature Circular Connectors
High Performance, Microminiature Circular Connectors HR25 Series Mated dimensions 3. Diagrams of Connectors in Combination Features Solder type plug (HR25-*TP-**) Crimp type plug (HR25-9TP-**C) 1. Small,
More informationAssembly, Installation, and Removal of Contacts and modules
Assembly, Installation, and Removal of Contacts and modules FOR 20/26 GHz coaxial CONTACTS AND MODULES Table of Contents Section 1 Receiver Contact Assembly instructions Section 2 ITA Contact Assembly
More informationASSEMBLY, INSTALLATION, AND REMOVAL OF CONTACTS AND MODULES
ASSEMBLY, INSTALLATION, AND REMOVAL OF CONTACTS AND MODULES FOR 20/26 GHz COAXIAL CONTACTS AND MODULES Table of Contents SECTION 1 RECEIVER CONTACT ASSEMBLY INSTRUCTIONS SECTION 2 ITA CONTACT ASSEMBLY
More informationonlinecomponents.com
Description Amphenol connectors are used in applications where maximum RF shielding and minimum noise radiation are required. Features/Benefits Available in 7/8-20 and 11/16-24 threading, C, BNC and TNC
More informationTriax Amphenol. Description Amphenol Triax connectors are used in applications where maximum RF shielding and minimum noise radiation are required.
Description Amphenol connectors are used in applications where maximum RF shielding and minimum noise radiation are required. Features/Benefits Available in 7/8-20 and 11/16-24 threading, C, BNC and TNC
More informationFISCHER FREEDOM TM SERIES
K CHAPTER FISCHER TM SERIES EASY MATING EASY CLEANING EASY INTEGRATION KEY FEATURES No key code: 360 mating freedom & optimized cable management Membrane-sealed contacts (patent pending) Low profile IP68
More informationEthernet 100 Mbps Quadrax
Ethernet 100 Mbps Quadrax Quadrax Contact Today s technology for Airbone and Military equipment is more and more complex, requiring the management of an increasing flow of information at greater speeds.
More informationSTRAIGHT DIP SOLDER PLUG
STRAIGHT DIP SOLDER PLUG 8051 SERIES SERIES. For PCB Solder. Centronic Connector # Available in 14, 24, 36 and 50 circuits # Shell: Steel, tin plated as standard # Insulator Material: Glass filled polyester
More informationSMB Connectors Specifications Flexible Cable Bulkhead PCB Mount... 66
Section Index Connectors Specifications... 62 Flexible Cable... 64 Bulkhead... 65 PCB Mount... 66 Other Information Assembly Instructions... 176 Cable Assembly... 166 Cable Information... 168 Numerical
More informationM Series Half-inch Rotary Switches
Half-inch Switches Features/Benefits Multi-pole and multi-positions Panel and PCB mounting Stainless steel actuator Non-shorting contacts RoHS Compliant IP67 (F option only) Typical Applications Test equipment
More informationProduct Range. Rocker & Paddle Switches. Rocker & Paddle Switches. Rocker & Paddle Switches
Product Range for Panel Mounting: F, TRD and Gemini Series for PCB Mounting: Gemini Series Main features: Sealed or unsealed versions Various switch functions Gold or silver contacts LED illumination available
More informationInterface Mating Dimensions
SMPM Coaxial Connectors SMPM Connectors DC - 65 GHz SV Microwave offers a complete line of SMPM connectors. SMPM connectors, a push-on mating design, provide microwave performance through 65 GHz and offer
More informationSELECTOR SWITCH TYPE 04
SELECTOR SWITCH TYPE 0 MAIN FEATURES VERY ROBUST, MULTI WAFER, UP TO POSITIONS 5'000 switching cycles with up to 0 Ncm switching torque Gold plated contacts: micron Optional IP68 front panel sealing Operating
More informationDIELECTRIC CERAMIC FILTER SPECIFICATION 1 OF 6 SPECIFICATION COMMERCIALLY AVAILABLE CERAMIC NOTCH FILTER PART NUMBER: CFN-13503
DIELECTRIC CERAMIC FILTER SPECIFICATION 1 OF 6 SPECIFICATION COMMERCIALLY AVAILABLE CERAMIC NOTCH FILTER PART NUMBER: CFN-13503 Revision Made: ISSUED / REVISION ENGINEER APPROVED DOCUMENT CHECKED DRAFTSMAN
More informationInsulator Connector inserts: Polyamide (PA66) UL 94 V0 All connectors with different shielding material for different jacket and shield diameters.
Technical Data Shell material Machined components: die cast components: Shell plating: Cable entry: Copper-Zinc alloy (CuZn) Zinc (GD-Zn) Nickel (Ni) plated max. 18 mm Insulator Connector inserts: Polyamide
More informationK CHAPTER FREEDOM TM SERIES EASY MATING EASY CLEANING EASY INTEGRATION FISCHER KEY FEATURES
K CHAPTER FISCHER TM SERIES EASY MATING EASY CLEANING EASY INTEGRATION KEY FEATURES No key code: 360 mating freedom & optimized cable management Membrane-sealed contacts (patent pending) Low profile IP68
More informationSPECIFICATION COMMERCIALLY AVAILABLE CERAMIC BAND PASS PART NUMBER:CF ISSUED / REVISION ENGINEER APPROVED DOCUMENT CHECKED DRAFTSMAN
FILTER SPECIFICATION 1 OF 6 SPECIFICATION COMMERCIALLY AVAILABLE CERAMIC BAND PASS PART NUMBER:CF-10300024 ISSUED / REVISION ENGINEER APPROVED DOCUMENT CHECKED DRAFTSMAN 6/04/04 ** 5/13/2010 SRJ 5/13/2010
More informationLMR-195-LLPX. LMR -195-LLPX Flexible Low Loss Plenum Coax TIMES MICROWAVE SYSTEMS
LMR-195-LLPX LMR -195-LLPX Flexible Low Loss Plenum Coax Ideal for Indoor/Outdoor Plenum Feeder runs Drop in replacement for RG-142 UL/NEC/CSA rated CMP/FT6 (listed under UL file #E-170516) Any wireless
More informationCannon Trident Connectors
Neptune is a range of circular connectors specifically designed for harsh environment applications. They come with membrane wire seals that meet the requirements for IP67 and do not require blanking plugs
More informationCannon 50 Ohm RF Connectors. Electronic Components
Cannon 50 Ohm RF Connectors Electronic Components Over 90 year history... ITT Electronic Components is an innovative and dynamic company with the in-depth experience of a 90 plus year industry leader.
More informationOCS (Oval Contact System) Connectors
offers the High Perfmance Interconnect Solution f your High Speed Needs. The OCS* (Oval Contact System) is the newest 38999 Interconnect Product offering that provides many advantages f high speed data
More informationEN3716 SAE AS81659 ARINC
6 DSX RTX Series series SAE AS81659 EN3716 ARINC 404 Page Introduction... 6-4 Applications... 6-5 DSX SAE AS81659 Product overview... 6-6 Technical characteristics :... 6-7 & 6-8 Electrical... 6-7 Mechanical
More informationType N connectors DIVIDER PAGE
Type N connectors DIVIDER PAGE 179 N interface dimensions E D REF. PLANE REF. PLANE C D ØF ØB ØA ØA ØB ØE SEALING GASKET.625-24UNEF-2B G C H MIN. FULL H J F G MIN. FULL "N", MALE, Mil-Std-348A Fig. 304.1.140.110
More informationAssembly Instructions-C12 Amphenol Triax BNC, 180 Polarity
Assembly Instructions-C2 Amphenol Triax BNC, 80 Polarity Washer C Washer D Contact Inner Insulator E Inner Body F Inner Insulator G Body Nut Gasket Washer B Washer A (2 pcs. if needed) Teflon Washer 3-4774-3
More informationConnectors Type M DIN / IEC Catalog E /01 Edition 1
Connectors Type M DIN 41612 / IEC 60603-2 www.erni.com www.erni.com Contents General Information 3 Electrical & Mechanical Specifications for Connectors 4 Standard Male Connectors for Daughtercards 6 Standard
More informationHERMETIC. Hermetic Connectors. High Performance Sealing Solutions
HERMETIC Hermetic Connectors High Performance Sealing Solutions Hermetic Connectors 38999 QPL Qualified Presentation Based on glass to metal seal technology, SOURIAU offers hermetic connectors to cover
More informationMetal Alloy Low-Resistance Resistor Specifications
Page 1 of 14 Metal Alloy Low-Resistance Resistor Specifications March 2010 Specification Number:GCT-SPEC-011-11 Issued Date:2010/03/01 Page 2 of 14 1. Scope: 1.1 This specification is covered following
More informationMini50 Unsealed Connector System 2.00mm Pitch
USCAR Mini50 approved interface delivers 50% space savings over traditional USCAR 0.64mm connectors, with smaller terminals to fit more lowcurrent electrical circuits in interior, unsealed, transportation-vehicle
More informationCircular Connectors Conforming to JIS C 5432
Circular Connectors Conforming to JIS C 5432 JR Series Features 1. These round connectors conform to JIS C 5432 "Circular connectors for electric appliances." Product Specifications Ratings Ratings Ratings
More informationStac64 UnSealed connector SyStem
Stac64 A stackable connection system for unsealed applications, providing single and multi-pocket PCB solutions, offering a diverse range of circuit sizes Stac64 34729 Female Signal Receptacle 34803 CTX64
More informationFEEDTHROUGH CAPACITORS AND FILTERS FOR DEFENCE, PROFESSIONAL AND TELECOMMS APPLICATIONS
FEEDTHROUGH CAPACITORS AND FILTERS FEEDTHROUGH CAPACITORS AND FILTERS FOR DEFENCE, PROFESSIONAL AND TELECOMMS APPLICATIONS CONTENTS ALL RANGES RoHS COMPLIANT AC Feedthrough Capacitors Class Y2 250VAC Page
More information1 7 ASC_WF06A_V01 NOV
WF06A 1 ~ 1Mohm ±5%, ±1% High Power Chip Resistors Size 0603 1/4W *Contents in this sheet are subject to change without prior notice. Page 1 of 7 ASC_WF06A_V01 NOV - 2015 FEATURE 1. Small size and light
More informationCA-COM Industrial Connectors
CA-COM Industrial Connectors ITT Corporation ITT is a diversified leading manufacturer of highly engineered critical components and customized technology solutions for the energy, transportation and industrial
More informationMeasuring Spark Plug M10x1
Pressure Measuring Spark Plug M10x1 with Integral 3 mm Cylinder Pressure Sensor and Replaceable Cable Measuring spark plug Type 6113B... allows cylinder pressure measurement without the effort of providing
More informationMHz Filter
Applications Broadband tuners DOCSIS 3.0 gateways DOCSIS 3.0 cable modems SMP12D 3.00 x 3.00 x 1.22 mm Product Features Usable bandwidth 100 MHz High attenuation Balanced operation Small Size: 3.00 x 3.00
More informationREDCUBE The Impressive Press-Fit Technology and more
REDCUBE The Impressive Press-Fit Technology and more High amperage solution Superior mechanical retention these are. Terminals for Power! AGENDA Press-fit technology What is it? Advantages Installation
More informationCircular Connectors. Contents. Introduction Specifications Cable Connectors Panel Connectors Accessories
ircular onnectors ontents Introduction Specifications able onnectors Panel onnectors ccessories ircular onnectors These connectors are designed for use in harsh environments. The high specification connectors
More informationHigh Power Low Ohm Chip Resistors. Size W, W, /2W
WW25P, WW20P, WW12P ±1%, ±5% 47mΩ~976mΩ High Power Low Ohm Chip Resistors Size 2512 2W, 2010 1W, 1206 1/2W *Contents in this sheet are subject to change without prior notice. Page 1 of 7 ASC_WW25P-20P-12P_V08
More informationRP SMA Female Connector Crimp/Solder Attachment For RG178, RG196
RP SMA Female Connector Crimp/Solder Attachment For RG178, RG196 TECHNICAL DATA SHEET PE4799 RP SMA Female Connector Crimp/Solder Attachment For RG178, RG196 Configuration Connector Connector Specification
More informationCYLER. Catalogue. Cyler Technology Limited cylerconnectors. Push-Pull connectors
Push-Pull connectors Catalogue cylerconnectors Selection Guide Where and Why Push-Pull? Industrial and Automation Medical electronics Telecommunication Test and Measurement Quality aesthetics for more
More informationSMA Reverse Coaxial Connector Up to 26.5GHz
SMA Reverse Coaxial Connector Up to 26.5GHz SMA(R) Series Applications Features 1. Excellent high-frequency performance Equivalent to perform same characteristics as Hirose HRM series which is Japan's
More informationPower Terminals. 316 ept GmbH I Tel. +49 (0) / I Fax +49 (0) / I I
E L E C T R O N I C C O N N E C T O R S Power Terminals 316 ept GmbH I Tel. +49 (0) 88 61 / 25 01 0 I Fax +49 (0) 88 61 / 55 07 I E-Mail sales@ept.de I www.ept.de Contents Introduction 318 Overview 319
More informationCMC Hybrid Connectors Standard and Power Versions
CMC hybrid connectors and mating headers provide sealed, high-density, modular and cost-effective wire-to-board and wire-to-wire connection systems for heavy-duty powertrain and body-electronics applications
More informationSMA Reverse Coaxial Connector Up to 26.5GHz
SMA Reverse Coaxial Connector Up to 26.5GHz SMA(R) Series Applications Features 1. Excellent high-frequency performance Equivalent to perform same characteristics as Hirose HRM series which is Japan's
More informationRF Coaxial Connectors
SSMB/SSMC Introduction This range of 50 ohm microminiature radio frequency connectors is suitable for both military and commercial equipment operating at frequencies up to 4 GHz (SSMB) and 12.4 GHz (SSMC).
More informationRF Coaxial Connectors SMZ (Type 43)
SMZ (Type 43) Introduction The ITT Cannon range of SMZ connectors are extensively used in 75 communication systems and have become the recognised standard in telecommunications in many parts of the world.
More informationOct 25, 2007 DIELECTRIC CERAMIC FILTER SPECIFICATION 1 OF 6 SPECIFICATION COMMERCIALLY AVAILABLE
Oct 25, 2007 DIELECTRIC CERAMIC FILTER SPECIFICATION 1 OF 6 SPECIFICATION COMMERCIALLY AVAILABLE ITEM: DIELECTRIC CERAMIC FILTER PART NUMBER: CF-14200604 ISSUED CHECKED CHECKED CHECKED APPROVED FILTRONETICS
More informationBLINDMATE CONNECTORS AND COMPONENTS. Selection Guide BMA BMMA BMZ BZ
BLINDMATE CONNECTORS AND COMPONENTS SV Microwave, Inc. is a world leader in the RF/microwave industry. We design and manufacture coaxial connectors, cable assemblies, attenuators, terminations, and custom
More informationLow Profile Connectors for AC power supply
Low Profile Connectors for AC power supply RP34L Series Receptacle installed height (3 pos.type) (2 pos.type) RP34L Existing RP34 Features 1. Low profile Receptacles are designed with their installation
More informationARinc 600 Series. Rack & Panel Rectangular Connector. Brief introduction. Specification. 1. Material and surface treatment. 3. Electric properties
ARinc 600 Series Rack & Panel Rectangular Connector Brief introduction Good performance of environment resistance 216 kinds of anti-misoperation styles High density up to 800 signal contacts Low insertion
More informationWF08P, WF06P. High Power Chip Resistors Size /4W ; /8W. Customer : Approval No : Issue Date : Customer Approval :
WF08P, WF06P ±1%, ±5% 0Ω, 1Ω~1MΩ High Power Chip Resistors Size 0805 1/4W ; 0603 1/8W Customer : Approval No : Issue Date : Customer Approval : Page 1 of 7 WF08P;WF06P Version 04 Jul.-2009 FEATURE 1. Small
More informationMulti-Flex Low Loss, Pre-Connectorized Cable Sets, DC~18 GHz, MF02-Series
MultiFlex Low Loss, PreConnectorized Cable Sets, DC~18, MF02Series for rugged military, defense and T&M applications upto 18 use reliable performance, dependable service MF02Series Preconnectorized Cable
More information