Stainless steel enclosures
|
|
- Felicity Bradford
- 6 years ago
- Views:
Transcription
1 Stainless steel enclosures Door reinforcement frame on CRSX 108 and 128 models. Polyurethane foamed gasket ensuring full watertightness (IP66). Back with 4 welded studs for fixing of mounting plate and depth adjustable supports. 4 drillings for direct wall fixing or through brackets. Vertical door profiles (up from 600 mm high enclosures) for fixing of equipment. Earthing between body and door through welded studs. Total safety of use. Available as accessory. Stainless steel hinge bolted to the body of the enclosure for a reversible door and easy machining. Opening angle over 120.
2 for permanent protection Stainless steel inside guide and reinforcement frame with section mm, reinforced at 25 mm intervals with Ø 5 and 10 mm drill holes. Inside view of cable gland plate in stainless steel. Guide with drill holes every 25 mm to facilitate depth-adjustment of the plate.
3 C R S X STAINLESS STEEL ENCLOSURES CRSX 54/200 The stainless steel Himel enclosures are specially suitable for corrosive environments and installations where hygiene is essential. Also in chemical and food industries, etc. 14 dimensions. Wide range of accessories compatible with the CRN enclosures. CMOX range in stainless steel also available, dimensions up to 2000 high 1600 wide 600 deep (mm). Monobloc watertight AISI 304 stainless steel enclosures. Types AISI 304L (resistant against corrosive organic agents) and AISI 316 (resistant to concentrated acids and halogen based agents) also available on request. Scotch brite (AST) type mechanical polish for an excellent surface quality and improved protection against corrosion. Electrical polish on request.
4 STAINLESS STEEL ENCLOSURES C R S X MODELS, SIZE AND REFERENCES Height (A) External dimensions (mm) Depth (C) No. of locks No. of hinges Enclosures D F G M T metal insulating perf. universal CRSX 32/ p p p p CRSX 3025/ p p p p CRSX 33/ p p p p CRSX 43/ p p p p p CRSX 43/ p p p p p p p CRSX 44/ p p p p p CRSX 54/ p p p p p p p CRSX 64/ p p p p p p p CRSX 66/ p p p p p CRSX 75/ p p p p p p p CRSX 86/ p p p p p p p CRSX 88/ p p p p p CRSX 108/ p p p p p p p CRSX 128/ p p p p p p (1) See characteristics and references in CRN. Weight (Kg) Mounting plates (1) Depth adjust. m. plate support (1) DINIMEL chassis (1) Internal door (1) Dimensions (mm) FIG. 1 B C G D F A-75 A A-50 D B-75 B-50 B-50 M M6 15 M mm thick door reinforcement frame in CRSX 108/300 and 128/300 models. v mm cross section with Ø 5 and 10 mm drillings every 25 mm. 2 Two vertical door reinforcement profiles (models from 600 mm high) with 4,25 mm Ø drillings every 25 mm. 2.5 T 2.5
5 C R S X - C M O X FUNDAMENTAL COMPONENTS IP66/IP55 (EN 60529) Mounting plates Metallic Insulating A comprehensive range of plates in three versions solves most installation requirements. c Mounting plates in zinc bichromated steel with holes for accessory fixing and earth connection. c Insulating plates in bakelite. c Perforated plates in galvanized steel, drilled with 3.6 mm Ø holes, mm apart. c Perforated plates for quick equipment fixing, in zinc bichromated steel. The distribution of them, together with the position of the nuts, cover all the fixing points. P A Metallic S MM-1010, MM-1012, MM-128 and MM-1210 ø6.5 ø B-75 Perforated S P Insulating E S Universal 15 Perforated Universal A-75 P D MF-1010, MF-1012, MF-128 and MF-1210 ø3.6 B-75 To fit into CRSX enclosures Metallic Insulating Perforated Universal Height (A) Thickness Weight Thickness Weight Thickness Weight P S D E (mm) (Kg) (mm) (Kg) (mm) (Kg) MM MB MF MR MM MB MF MR MM MB MF MR MM MB MF MR MM MB MF MR MM MB MF MR MM MB MF MR MM MB MF MR MM MB MF MR MM MB MF MR MM MB MF MR MM MB MF MR MM MB MF MR
6 ACCESSORIES AND COMPLEMENTS C R S X - C M O X IP66/IP55 (EN 60529) Locks for CRSX enclosures Type Key type / reference Stainless steel v 6 mm square lock LC-7 TC 6/CSX Stainless steel v 7 mm square lock LC-7 TC 7/CSX STD/CSX Double bar standard lock, with stainless steel latch and fixing screw. Operation through LDB3 key (according to DIN 43668) (supplied as standard). STD/CSX. Stainless steel 8 mm triangular lock LT-8 TT 8/CSX Key lock type 405 Full stainless catch CL/CSX CC6/CSX Locks for CMSX enclosures Type Key type / reference Double bar lock LDB 5 TE DB/ML 7 mm triangular lock LT-8 TE T7/ML 8 mm triangular lock LT-8 TE T8/ML v 6 mm square lock LC-8 TE C6/ML v 7 mm square lock LC-8 TE C7/ML v 8 mm square lock LC-8 TE C8/ML Directly operated standard closing mechanism retractable handle with key 405. Key lock type 405 Safety cylinder lock Manual lock TE L/ML TE R/ML TEM/PLD Padlock fastening BCME/PL Wall fixing brackets Set of 4 stainless steel brackets fixed from the outside vertically or horizontally. Not included in standard supply. : CRSX: PFCX. CMOX: FCMX. FCMX PFCX
7 C R S X - C M O X ACCESSORIES AND COMPLEMENTS IP66/IP55 (EN 60529) Fixing accessories for univesal plates mm Fixing nut Fixing screw with washer Thread metric size Packing unit Lenght (mm) Packing unit M3 TFP M4 TFP TOR 10/4 A TOR 16/4 A M5 TFP TOR 12/5 A TOR 18/5 A M6 TFP TOR 12/6 A TOR 18/6 A Clamps GCR Snap-on clamps designed to be installed directly on 19 racks, and MR mounting plates. Ref. GCR. CRSX canopies Made of stainless steel. Prepared for direct coupling to enclosures. To couple to enclosures Height (C) A B C D E F TX TX TX TX TX TX TX TX Section Z-Z
8 ACCESSORIES AND COMPLEMENTS C R S X - C M O X IP66/IP55 (EN 60529) CMOX canopies Made of stainless steel 304, polish finished. c Degree of protection: IP55. c Screw fixing into holes which can alternativeley be used for lifting eyes. To fit to enclosures Depth (C) TJX 8040 CMOX TJX CMOX TJX CMOX TJX CMOX TJX CMOX TJX CMOX TJX CMOX C B + 48 CMOX pedestals Made of stainless steel 304. Prepared for coupling to ground fixing holes of the CMOX enclosures. c 100 mm height. c Accessible from the front and the back. To couple to enclosures Depth (C) Weight (kg) ZUX 84/ ZUX 103/ ZUX 104/ ZUX 124/ ZUX 125/ ZUX 164/ ZUX 166/ C B - 62 C C C - 34 B B B
Wall-mounting steel enclosures suitable for any CRN and CRNG application
Wall-mounting steel enclosures suitable for any CRN and CRNG application 1 2 3 4 5 6 1 Front rain gutter prevents the entry of water, oil or liquids, ensuring IP66 protection. 10 9 8 7 1/18 2 A complete
More information2.1 Accessories System for Enclosures CRN-CRS
nclosures Wall Mounted 2.1 Accessories ystem for nclosures CRN-CR Mounting plates A complete range of mounting plates comprising 4 versions able to provide all the mountings needed for this installation
More informationSerious about Service
Serious about Service Stainless steel enclosures IP66 Features and benefits Features: IP66 certified Grades 304, 304L and 316L available Monobloc symmetrical enclosure Scotch Brite mechanical polished
More informationPOLYMEL polyester monobloc enclosures
polyester monobloc enclosures 1 2 3 4 5 6 1 The built-in canopy protects the door and the sealing gasket. 5 Enclosure with a tempered glass transparent door, maintaining the IP66 and IK08 (5J) degrees
More informationpharmaceutical petrochemical industries The new Hygienic range Clean design, easy to clean
7 The new Hygienic range Clean design, easy to clean The Hygienic line is born to help prevent bacterical contamination of products being processed in the production lines where IRINOX enclosures are used,
More informationBOXES WALL-MOUNTING BOXES AND TERMINAL BOXES
BOXES WALL-MOUNTING BOXES AND TERMINAL BOXES ST WALL-MOUNTING BOXES WITH BLANK DOOR STP WALL-MOUNTING BOXES WITH PLEXI DOOR ST/STP COMPLEMENTARY ACCESSORIES SDV TERMINAL BOXES WITH SCREWED COVER SDF TERMINAL
More informationBoxes IRINOX designs and manufactures customized boxes in order to satisfy all your requirements!
IRINOX designs and manufactures customized boxes in order to satisfy all your requirements! Hinged or screwed doors Hinged doors with flush mounted enclosures Partial window, 3+3 laminated glass doors
More informationSTX stainless steel boxes
STX stainless steel boxes Enclosure and door manufactured from AISI 304 stainless steel (AISI 316 on request). Mounting plate manufactured from 2.5mm sendzimir sheet steel. Hinge in stainless steel. Box
More informationBlind and Polycarbonate Cases FQ Series: stainless steel cases with single door
Series Smart 22 Series Smart Blind and Polycarbonate Cases FQ Series: stainless steel cases with single door The Smart series is the proposal for boxes with and witout inner door for small and medium sized
More informationPUSH BUTTON BOXES AND TERMINAL BOXES
EN PUSH BUTTON BOXES AND TERMINA BOXES PUSH BUTTON BOXES AND TERMINA BOXES 4 PUSH BUTTON BOX MODE APH 8 12 TERMINA BOX MODE ADH slotted and hex screws supplied loose silicone gasket in compliance with
More informationIP65/IP66 ABS/Polycarbonate Screw Lid Boxes
IP65/IP66 ABS/Polycarbonate Screw Lid Boxes p Versatile, lightweight & durable p Choice of materials: polycarbonate for rugged applications or ABS as an economic alternative p IP protection for outdoor
More informationACCESSORIES FOR SZE2 CABINETS
ZPAS 143 DOORS Doors Intended for use instead of front solid door or rear panel. Maximum door opening angle: 120 Sheet steel textured powder paint, light grey (RAL 7035), stiffened profiles, brown smoked
More informationSINGLE DOOR BOXES. PAINT FINISH ETA standard epoxy polyester powder coating. Enclosure and door: colour RAL 7035 textured finish.
ST SINGLE DOOR BOXES Enclosure and door manufactured from 1.5 mm thick sheet steel. Mounting plate manufactured from 2.5 mm thick sendzimir sheet steel. Enclosure and door: colour RAL 7035 textured finish.
More informationNumber of PG holes. 1 x PG 9 (Ø 15.5) 12 x PG 13.5 (Ø 21) 1 x PG 9 (Ø 15.5) /300/400/ Rittal Catalogue 32/Industrial Enclosures
us enclosures G. us enclosures Enclosure:.38 Door:.5 IP 65 to EN 60 59/09.00, complies with NEMA. Door with l/h hinge, cam lock with double-bit insert, () support rail(s) S 35/7.5 (for G 586.). Drilled
More informationProduct Data For FARNELL
ae Product Data For FARNELL ae Uniset is / Varioset is ae EL ELECTRONIC KOMBI SYSTEM WALL MOUNTING Pole clamp For reliable, convenient fastening to round or square poles. For pole diameter/size:
More informationIP65 enclosures orion plus
IP65 enclosures orion plus One system for indoor and outdoor application Sheet steel or glass reinforced polyester - the orion plus enclosures are suited for harshest conditions and can be applied for
More informationThe Ex-Cell-I series is made for instrumentation with easy access central locking system and hinged cover.
E X - T E R M I N A L E N C L O S U R E S Stainless Steel Version for Zone and Zone 2 The enclosure range is an ATEX certified enclosure / termination solution for category 2 (Zone) application with an
More informationI Ex-e/Ex-i terminal box I
ID TAG label & bracket Door document holder opti. Security padlock Hasp opti. Technical data Marking accd. to 94/9/EC II G Ex e II / II D Ex td A1 IP66 Temperature class T6 up to +40 C / T5 up to +55 C
More informationApprovals, see page 41. Detailed drawing, see page 1226/1227.
Ex enclosures Stainless steel F G B.7 With screw-fastened lid Material: Stainless steel.40 (AISI 04) Surface finish: Brushed, grain 40 Protection category: IP 66 to EN 60 9/09.00 Supply includes: Enclosure,
More informationKnürr Smaract. Knürr Smaract. CompactRack
CompactRack Features Ample space for components and cabling provided in an efficient, compact design. The innovative frame concept with triangular extrusions ensures low weight while maintaining high stability.
More informationsafybox BRES GRP POLYESTER ENCLOSURES Double Insulation polyester enclosures. Light Grey Colour RAL7035. Self-extinguishing material
Double Insulation. Light Grey Colour RAL7035. Self-extinguishing material End user friendly hinge-pin system, It enables to work separately on the rear back panel and on the door, making the assembly more
More informationmore power to the cube
more power to the cube Tais Cube designed in GRP thermosetting for tough enclosure applications where space, ingress protection, quick installation and long service life is important. available with blind
More informationCut out PRODUCT CODE HANDLE BODY FINISH MATERIAL MODUL. 5 mm Double bit 8 mm Square 9 mm Triangular Button. Stainless steel dust cap (Keyed alike) 03
ROD-LATCH SYSTEM LINEAR HANDLE LOCK 204 V : 1 With mechanism Cut out Ergonomic and modern design Locking and unlocking by linear movement Suitable for inside & outside gasketing applications Swing handle
More informationACCESS SOLUTIONS NEW PRODUCTS BROCHURE.
ACCESS SOLUTIONS NEW PRODUCTS BROCHURE www.essentraaccesssolutions.com ESSENTIAL SOLUTIONS DELIVERED NEW PRODUCTS Locks Hinges Gaskets Handles Stainless Steel Products Electronic p3-6 p13 14 p17-18 p7-8
More informationExplosion protected terminal boxes type, GHG 72.
1 Technical data 1.1 Plastic terminal boxes GHG 721... ATX type examination certificate BVS 13 ATX 013 X Marking acc. to 94/9/G and standard ATX x (d e mb) II T5* -55 T amb +55 Gb x (d e mb) II T6* -55
More informationKaedra Weatherproof DIN Type Enclosures
Multi 9 System Catalog Section 6 Additional System Devices Kaedra Weatherproof DIN Type Enclosures Applications Expandable enclosures for service, industrial, or equipment applications Protects against
More informationOUR VISION STAINLESS STEEL MILD STEEL MODULAR FLOOR STANDING NON METALLIC P F BLACKBURN SOUTH VIC 3130
Excalibur REAZ AUSTRALIA Enclosures PTY LTD 59 P.O. Northville BOX 2340 Drive Barnsley NSW 2278 BLACKBURN SOUTH VIC 3130 T - 03 9878 4141 sales@reaz.com.au EX-EC/S General Purpose Wall Mount Enclosures
More informationFEATURES. (fig.1) (fig. 2) (fig. 3) (fig. 4)
Catalogue 1/2016 FEATURES (fig.1) (fig. 2) (fig. 3) (fig. 4) Using the toggle principle, the quick clamping tools have decisive advantages: The clamping lever is opened so as to completely clear the
More informationNexT Range Large sheet steel enclosures
Large sheet steel enclosures 8 Large sheet steel enclosures The NexT Range is the optimum choice for particularly harsh environments. The stainless steel design of the NexT Range can face up to the toughest
More informationSales: Malux Finland Oy, P.O.Box 69, FI Porvoo, Phone , Fax ,
E X - M A N U A L M O T O R S T A R T E R S Up to A Motors have to be protected against over loads, phase failures and overheating: CEAG's power circuit breaker and manual motor starter features phase-failure
More informationWall Mounted Enclosures Steel Range Stainless Steel Single door ASR
Wall Mounted Enclosures Steel Range Stainless Steel Single door ASR IP 66 TYPE 4X, 12, 13 IK 10 252 Product Catalogue 02 Wall Mounted Enclosures Material: AISI 304 / AISI 316L pre-grained stainless steel.
More informationMINIPOL. Hot moulded GRP
MINIPOL Hot moulded GRP MINIPOL System HOT MOULDED CABINETS Grey color RAL 7035 Two door types Plain: allows the mounting of devices in the door. Glazed: Combined with mounting plate, chassis and/or internal
More informationFibox Stainless Steel Enclosures
Fibox Stainless Steel Enclosures Standard Stainless Steel Enclosures with mounting plate CAB SL 302015 6810100 300x200x150 6418074071316 CAB SL 203015 6810101 200x300x150 6418074071323 CAB SL 303015 6810102
More informationSMALL CABINETS. Small cabinets QL pag.1. Small cabinets QV pag.3. Small cabinets QLP pag.5. Small cabinets QVP pag.7. Small cabinets QS pag.
QL pag.1 QV pag.3 QLP pag.5 QVP pag.7 QS pag.9 QM pag.11 Accessories for small cabinets pag.13 SMALL CABINETS SMALL CABINETS QL INSIDE DOORS WALL FIXING LUGS DOOR LOCKS ANTI-CLOSE DEVICE SMALL CABINETS
More informationCompact enclosures AE
Compact enclosures AE Material: 1.4301 (AISI 304) Mounting plate: Sheet steel Cam lock: Die-cast zinc, nickel-plated Surface finish: Brushed, grain 40 Mounting plate: Zinc-plated Protection category: IP
More informationEmpty enclosures IEC 62208
374 www.hensel-electric.de/en in accordance with for customized solutions and individual applications for example for low-voltage switchgear and controlgear assemblies i n accordance with the IEC 61439-series
More informationJunction Boxes & Enclosures JBES and ECES Series: 316L Stainless Steel Enclosures Increased Safety
JBES Series Medium Voltage 11 kv ECES Series Compliance Data: ATEX - IEC: ATEX IEC CE Ex e II Ex ia IIC; Ex ib IIC T6 to T4 Ex td A21 T80 C to T130 C Ex de IIC; Ex demb IIC Operating Temperatures: -50
More informationInternationally approved.
E X - M A N U A L M O T O R S T A R T E R S Up to 2 A Motors have to be protected against over loads, phase failures and overheating: CEAG s power circuit breaker and manual motor starter features phase-failure
More informationCS Wall-Mounted Sheet Steel Enclosures with Mounting Plate
CS Wall-Mounted Sheet Steel Enclosures with Mounting Plate wa_vt08914 Available in 45 sizes... from 250x200x150 mm to 1200x1200x250 mm image01-ci The stable CS enclosures series made of solid sheet steel
More informationDoor available front and rear
Features - The range consists of nine cabinets, ranging from 20" x 30" to 50" x 40". - Cabinet is self-extinguishing, hot molded halogen-free fiberglass reinforced polyester. - Gray dyed in mass (RAL 7036)
More informationProduct Data For FARNELL
ae Product Data For FARNELL ae Uniset is / Varioset is ae EL ELECTRONIC KOMBI SYSTEM WALL MOUNTING Pole clamp For reliable, convenient fastening to round or square poles. For pole diameter/size:
More informationCONCEPT Wall-Mount Enclosure Accessories
CONCEPT Wall-Mount Enclosure Accessories The CONCEPT Enclosure Group Accessory Selection Guide Steel section 4 or Stainless Steel Enclosures section 6 Steel section 4 or Stainless Steel Window-Door Enclosures
More information[ SOLUTIONS FOR AUTOMATION & CONTROL DEVICES: ]
[ SOLUTIONS FOR AUTOMATION & ONTROL DEVIES: ] INDUSTRY STANDARDS Solid hinged cover models. Mounting brackets required to meet UL/SA external mounting requirements. FEATURES remove and -install hinge pins
More informationGland Plate 1.4mm mild steel. -Opening: Situated at the far rear of the enclosure to make cabling onto the mounting plate easier.
14 SM SHEET STEEL ENCLOSURES ITH MOUNTING PLATE FOR ALL MOUNTING SM Delivery contents: Complete enclosure with mounting plate and fixing material, Blank flange with gasket and screws. Nylon washers for
More informationSpacial 3D steel enclosure 19"
19" The Spacial 3D 19" enclosure offer, for electronics and networks, comprises 2 ranges: - 1-body enclosures, depth 400 mm, with fi xed or swing rack. - 2-body enclosures, depths 400 and 500 mm. Technical
More informationThermowell For sanitary applications Model TW61, for orbital welding
Thermowells Thermowell For sanitary applications Model TW61, for orbital welding WIKA data sheet TW 95.61 74-06 Applications Sanitary applications Food and beverage industry Bio and pharmaceutical industry,
More informationTHE ENCLOSURE HARDWARE SUPPLIER
FABTECH SUPPLY THE ENCLOSURE HARDWARE SUPPLIER Our Products JIC Style Enclosures JIC Style Cover Clamp Bracket... 5 JIC Style Cover Clamp... 6 JIC Style Cover Clamp Assembly... 6 JIC Cover Clamp Screws...
More informationACCESSORIES ACCESSORIES 2150 DRAWING POCKET (A4) 2152 DRAWING POCKET (A5) 2220 CIRCULAR INSPECTION WINDOW 2215 COUNTER SCREEN
ACCESSORIES GROUP NAME 2150 DRAWING POCKET (A4) 2152 DRAWING POCKET (A5) 2220 CIRCULAR INSPECTION WINDOW 2216 COUNTER SCREEN 2215 COUNTER SCREEN 24XX 240X EYEBOLT CAGE NUT 340.00.135 TOGGLE LATCH 340.00.133
More informationLocking System. White Paper
Locking System White Paper Contents Introduction...4 Easy Integration...4 Benefits...4 Floor standing Mild steel...5 Floor standing Stainless steel... 10 Floor standing Aluminum... 15 Wall mounted Mild
More informationStainless Steel Products
/1 Stainless Steel Products Group code Product name 016 Push to close 11 T handle heavy duty lock 060 Quarter turn with spring 066 Mini quarter turn with spring 064 Quarter turn with spring 02 Swing handle
More informationType 4X Panel Enclosures
Wall-Mount Enclosures Type 4X Premier Series with Quarter-Turn Latches Data Sheet Construction Enclosure and door are fabricated from code gauge Type 304 or Type 316L stainless steel (see pages 209 & 210)
More informationFeatures EN/IEC Applications
PO Modular polyester boxes nsulated boxes Standards eatures ntro N/ 639- N/ 6059 N/ 608 pprovals - oxes with polyester cover: types 3, 3R,,, 6, 6P, and 3 - oxes with polycarbonate cover: types 3, 3R,,,
More informationProduct Catalog. Industrial Enclosures
Product Catalog Industrial Enclosures WE ARE CONTEG Since 1998, Conteg has been moving step by step toward the top of the market. We re a leader in supplying complete solutions for data centers, along
More informationTOGGLE CLAMP Catalogue 1/2015 CopertinaCatalogoSB2015_EN.indd 2 18/05/
TOGGLE CLAMP Catalogue 1/2015 FEATURES (fig.1) (fig. 2) (fig. 3) (fig. 4) Using the toggle principle, the quick clamping tools have decisive advantages: The clamping lever is opened so as to completely
More informationRack Mount devices shown not included Custom cabinet shown
763.422.2588 SPEC-00215 M763.422.2661 NETWORKING OUTSIDE PLANT PRODUCTS COMLINE OSP WALL-MOUNT CABINET PACKAGE AND ACCESSORIES Outside Plant Products COMLINE OSP Wall-Mount Cabinet Package and Accessories
More informationCS Wall-Mounted Sheet Steel Enclosures with Mounting Plate
www.bcp-group.co.id CS Wall-Mounted Sheet Steel Enclosures with Mounting Plate Product Information CS Wall-mounted Sheet Steel Enclosures with Mounting Plate Accessories PT. Berkah Cipta Persada Kota Deltamas
More informationHP Series. Altech Corp. 35 Royal Road Flemington, NJ Phone (908) FAX (908)
Series The Series are economy junction boxes for lighter duty applications. The 70, 80 and 90 feature snap on covers, while the 100, 150 and 190 feature 4 quick release screws. Enclosures are supplied
More informationGEZE TS 4000 E. Overhead door closer with electrohydraulic hold-open according to EN 1155, closing force size 1-6.
TS 4000 E Overhead door closer with electrohydraulic hold-open according to EN 1155, closing force size 1-6 Product features Closing force size EN 1-6 adjustable Closer in only one construction size Optical
More informationSmall cases... the perfect shell for valuable electronics
Small cases... the perfect shell for valuable electronics Small cases page 178 mini page 181 page 183 all standard size cards (100, 120, 160, 190 to 233,35 ) can be installed in one case favourable EMC
More informationIP54 Floor Standing & Wall Mounted Cabinets
IP54 Floor Standing & Wall Mounted Cabinets Our IP54 Style cabinets are designed to be used in areas of high dust levels and damp environments. They are available in 12U, 27U & 42U in widths/depths of
More informationEASYBOX Series. Weather-proof enclosures
EASYBOX Series Weatherproof enclosures EASYBOX Series WEATHERPROOF ENCLOSURES IP65 REFERENCE STANDARDS INTERNATIONAL STANDARD IEC 60670 (989) plus Modification (994) Enclosures for accessories for fixed
More informationCabinet & Drawer Hardware
www.crh.com.au SOLUTIONS FOR TRADE Cabinet & Drawer Hardware November 2017 www.crh.com.au SOLUTIONS FOR TRADE CONTENTS Page 3 Page 4 5 Page 6 8 Page 9 10 Page 11 12 Page 13 14 Page 15 Page 16 18 Page 19
More informationMILD STEEL WALL MOUNTING ENCLOSURES
MILD STEEL WALL MOUNTING ENCLOSURES WALL L MOUNTI IN NG WALL L MR5 M5 MO R 5 MAS IP66/NEMA 4, 12, 13 Single door Height: 200-1200 Width: 200-800 Depth: 155-400 ALL MILD STEEL WALL MOUNTING ENCLOSURES MR
More informationA c c e s s o r i e s
Accessories CEE-ACCESSORIES Mounting Frame For attaching panel mounting socket outlets a b c d e Fig.: Type 19 30 MB 1 50 50 3 3 13 5 5 10 17 57 7 7 10 1 0 0 50 50 10 19 5 5 10 150 70 5 0 10 151 Mounting
More informationRittal CM Compact System Enclosures
Rittal CM Compact System Enclosures Compact class = Top class: Infinite possibilities R Compact enclosure on the outside, Top enclosure on the inside! Index Convincing details... 3 5 Compact system enclosures
More informationApplication Guide EH1, EH2, EH3, EH6. PolySafe. Mersen Canada Toronto Inc.
PolySafe Application Guide EH1, EH2, EH3, EH6 Multipurpose polyester cabinets Range of fourteen multipurpose, factory assembled cabinets in one depth 320mm, for in- and outdoor stationary use. Applications
More informationINDUSTRIAL PLUGS. FIND ALL INFORMATION ON OUR WEBSITE: marechal.com. Dimensions and certificates
INDUSTRIAL PLUGS A range from 16 A to 600 A 1000 V. Automatic watertightness from IP44 to 66/67. From -40 to +240 C. GRP or metal casing. Reliable & compact. FIND ALL INFORMATION ON OUR WEBSITE: marechal.com
More informationPrisma Plus G enclosures IP30, IP31, IP43 enclosures
Prisma Plus G IP30, IP31, IP43 Prisma Plus G IP30, IP31, IP43 Presentation For safe and upgradeable electrical switchboards > Safety of people and property > Continuity of service > Optimization and upgradeability
More information*Discover our other ranges: Select your range of Spacial steel wall-mounting enclosures. Spacial S3DC. Spacial S3X page 5/4. Thalassa PLM page 6/12.
Spacial SDC Select your range of Spacial steel wall-mounting enclosures SDC You need an efficient, sealed multipurpose and aesthetic enclosure for an indoor industrial facility. Our solution: the Spacial
More informationIN STAINLESS STEEL: Compact enclosures Enclosures and support arm systems for the human/machine interface Large enclosures
IN STAINLESS STEEL: Compact enclosures Enclosures and support arm systems for the human/machine interface Large enclosures R RITTAL SYSTEM PARTNERS Perfect holistic solutions Be it automation, communications
More informationBOXES SOLUTIONS. BOXES
BOXES SOLUTIONS - wide range of dimensions: over 40 enclosures with blank door, 19 models with glazed door, enclosures with single blank door, double door with rod system and enclosure with single glazed
More informationTUNNEL54. Safety and fire resistance VENTILATION LIGHTING
TUNNEL54 Safety and fire resistance VENTILATION LIGHTING 238 TUNNEL54 Safety and fire resistance VENTILATION TUNNEL54 fire resistant sockets for ventilators Page 240 LIGHTING TUNNEL54 junction boxes with
More informationGeneral Purpose Enclosures. Universal NI - Zinc Coated Steel General Purpose Enclosure - IP66. Index
General Purpose Enclosures Universal NI - Zinc Coated General Purpose Enclosure - IP66 Index Dimension Sheet Dimension Sheet Viewing Window Information Leafl et Web Links Universal NI Information Page
More information1.6 Accessories include tool-free snap-in technology options for air flow, cable management, shelves, power distribution units, etc.
Rittal TS IT Rack Guide Specifications TS IT network server enclosure 1.0 General Description 1.1 Modular Free Standing Equipment Cabinet 1.2 Various combinations of dimensions: 1.2.1 Height: 48 /1200mm,
More informationCONTENT 4 TRACKS. 19 TLP 80 THERMO panels / tracks 20 PANELS 29 WINDOWS 31 WICKET DOOR 34 THRESHOLD TYPES 37 SIDE-HINGED DOORS 43 OPERATORS
Industrial doors CONTENT 4 TRACKS 5...STD 6...LHR-FM 7...LHR-RM 8...STD-RM 9...HL-TM 10...VL-TM 11...HL-MM1 with lower torsion spring shaft 12...HL-MM2 with lower torsion spring shaft 13...VL-MM1 with
More informationGlass Reinforced Polyester Enclosures
42 The GRP range comprises 16 sizes of enclosure manufactured in glass reinforced polyester (GRP). This material is highly resistant to contamination from oils, fats, aliphatic and aromatic carbohydrates,
More informationTHE NEW TS IT RACK 8
THE NEW TS IT RACK 8 Fast and reliable Fast Loosen the 48. (9 ) quickrelease fastener, slide into the correct position, and latch Reliable Maximum load capacity up to,000 N Convenience in perfection Interior
More informationEuromas-Polyester, an enclosure available
Euromas-Polyester 8 Euromas-Polyester, an enclosure available in sizes made of 0% glassbead-reinforced polyester, has been designed to satisfy the highest standards. It makes it possible for the user to
More informationGEZE TS 4000 E. Overhead door closer with electrohydraulic hold-open according to EN 1155, closing force size 1-6.
TS 4000 E Overhead door closer with electrohydraulic hold-open according to EN 1155, closing force size 1-6 Product features Closing force size EN 1-6 adjustable Closer in only one construction size Optical
More informationLight Fitting for Fluorescent Lamps Series ECOLUX 6600
> 1- or 2-lamp version: 18 W 36 W 58 W > Enclosure in polyester resin, glass fibre reinforced and cover in polycarbonate, impact-resistant > Quick fasteners www.stahl.de 10032E00 The light fittings series
More information3/2 Introduction. Unequipped Distribution Boards (Flat Pack) 3/6 8GK1 surface-mounting distribution boards
ALPHA 400 - DIN Wall-Mounted Distribution Boards /2 Introduction Unequipped Distribution Boards (Flat Pack) /6 8GK1 surface-mounting distribution boards Pre-Assembled Unequipped Distribution Boards /7
More informationStainless Steel Enclosures TRIMURTI STAINLINK EQUIPMENTS PVT. LTD.
Stainless Steel Enclosures A P P R O V E D TRIMURTI STAINLINK EQUIPMENTS PVT. LTD. Vision People: Technology: Growth: Profit: Culture: Create a conducive environment to leverage one s full potential Invest
More informationCompact metal enclosures
Spacial SM Compact metal enclosures Overview Convenience Robustness Comfort Practicality Protection Robustness: Body made as a single piece with welded rear panel. Front part forming a rigid frame with
More informationStandard Product Low Profile Type 12 One-Door Disconnect Enclosures
763.422.2600 Spec-00005 M763.422.2211 Wall-Mount Preferred-Cutout s Low-Profile Type 12 s and Accessories Wall-Mount Preferred-Cutout s Low-Profile Type 12 s and Accessories Low-Profile, One- to Five-Door
More informationThermowell For sanitary applications Model TW61, for orbital welding
s For sanitary applications Model TW61, for orbital welding WIKA data sheet TW 95.61 for further approvals see page 5 Applications Sanitary applications Food and beverage industry Bio and pharmaceutical
More informationIndustrial Enclosures
Industrial Enclosures Small enclosures from page 08 Polycarbonate enclosures PK... 0 Cast aluminium enclosures GA... 4 Terminal boxes KL... 6 E-ox E... 9 us enclosures G... 0 RiLAN Industrial IN... 4 Compact
More informationCarlon. Enclosures. Himeline * Enclosures. HS, HP and HLA/HLS Series Features. Applications. Standards
Himeline * HS, HP and HLA/HLS Series Features High-impact strength High dielectric strength Suitable for indoor and outdoor use Fully gasketed Lightweight Applications Instrument case Junction and terminal
More informationThermowell For sanitary applications Model TW61, for orbital welding
Temperature For sanitary applications Model TW61, for orbital welding WIKA data sheet TW 95.61 Applications for further approvals see page 5 Sanitary applications Food and beverage industry Bio and pharmaceutical
More informationCatalog Number Material Fits CONCEPT Enclosure CCPM4 Steel When A x B is equal to or less than x in. (762 x 762 mm)
SPEC-00186 CONCEPT Accessories CONCEPT Accessories CONCEPT PANEL CONVERSION KIT Conversion Kit adapts enclosure for mounting standard NEMA-style panels in CONCEPT enclosures. Bracket attaches to rear collar
More informationKlippon TBi FS Fixing Screw
Klippon Ti S - ixing Screw Klippon Ti S ixing Screw Stainless steel enclosures for use within harsh industrial environments ven under moderate environmental conditions, there is an increasing need for
More informationThermowell For sanitary applications Model TW61, for orbital welding
Thermowells Thermowell For sanitary applications Model TW61, for orbital welding WIKA data sheet TW 95.61 Applications Sanitary applications Food industry Beverage industry Bio and pharmaceutical industry,
More informationMetso Conductivity for sensor series 9400 and 9500
Metso Conductivity Modules 2800 for sensor series 9400 and 9500 Metso Conductivity Modules 2800 Plug-in modules easy service Exchangeable scales with concentration reading Remotely controlled range switch
More informationDECONTACTOR SWITCH WITH SOCKET-OUTLET
DECONTACTOR SWITCH WITH SOCKET-OUTLET This extensive and comprehensive product range covers all industrial applications. With sizes up to 400 A, it offers a wide range of mounting and installation options.
More informationGEZE TS 4000 E Overhead door closer with electrohydraulic hold-open according to EN 1155, closing force size 1-6
Overhead door closer with electrohydraulic hold-open according to EN 1155, closing force size 1-6 Product features Closing force size EN 1-6 adjustable Closer in only one construction size Optical power
More informationINTRODUCTION WALL MOUNT APPLICATIONS SLIMLINE BOX... 5 COMMSRAK... 5 IMRAK IMRAK
INTRODUCTION WALL MOUNT APPLICATIONS SLIMLINE BOX... 5 COMMSRAK... 5 IMRAK 400... 6-7 IMRAK 600... 8-9 FLOOR MOUNT APPLICATIONS COMMSRAK... 11 IMRAK 600... 12-15 IMRAK 1400... 16-32 Specification... 17-18
More informationINDUSTRIAL SOLUTIONS Wallmount Enclosures...pgs IND 1-46 Wireway/Trough...pgs IND Freestanding Enclosures...pgs IND FMD Enclosures...
INDUSTRIL SOLUTIONS Wallmount s...pgs IND 1-46 Wireway/Trough...pgs IND 47-60 Freestanding s...pgs IND 61-72 FMD s...pgs IND 73-86 Operator Interface...pgs IND 87-136 Noncorrosive...pgs IND 137-193 I N
More informationTunnel catalogue 2016 SOLUTIONS FOR ROADWAY, RAILWAY AND UNDERGROUNDS
Tunnel catalogue 2016 SOLUTIONS FOR ROADWAY, RAILWAY AND UNDERGROUNDS Leading Electrotechnology In 1904 PALAZZOLI began its activity in Brescia when electrical energy was first used in the industry. The
More informationCUSTOMIZED SOLUTIONS. FIND ALL INFORMATION ON OUR WEBSITE: marechal.com. Dimensions and certificates
CUSTOMIZED SOLUTIONS MARECHAL offers a wide range of distribution boxes for all industrial applications and a large choice of products designed specifically for power-supply in tunnels. FIND ALL INFORMATION
More informationFloor Standing Enclosures
& Floor Standing Enclosures Industrial Automation Power istribution 5 Modular Type Modular Type Görsel 6 Görsel 8 Monoblock Type Monoblock Type Görsel 7 Görsel 9 6 7 FRAME STRUCTURE EARTING CONTINUITY
More informationSPOOL VALVES solenoid air operated 1/4 to 1/2 tapped body and NAMUR for integrated pilot
SPOOL VALVES operated / to / tapped body and NAMUR for integrated pilot ATEX /-/ Series - FEATURES The valves offer environmental protection against the ingress of liquids, dusts or other foreign matter
More information