Каталог запасных и быстроизнашивающихся частей для электроискровых (электроэрозионных) проволочно-вырезных станков Fanuc
|
|
- Angela Johnson
- 6 years ago
- Views:
Transcription
1 Тел/Факс: (8482) , Тел. (8482) , (499) Internet: Каталог запасных и быстроизнашивающихся частей для электроискровых (электроэрозионных) проволочно-вырезных станков Fanuc Детали, не представлены в данном каталоге, вы можете заказать прислав в запросе как можно больше информации, а именно: марку и модель станка, год выпуска, номер детали (части) по каталогу соответствующего производителя станка, типоразмеры или чертежи детали, ее фотографию, надписи с этикеток, шильдиков, корпусов и т.п. Версия 1.F Дата:
2 Fanuc 12/1 List of power feed contact F001 A97L Power feed contact lower OD25 x ID9 x 10 mmt E.H.K.L.M series F002 A97L Power feed contact upper & lower OD16 x ID6 x 6.3 mmt F003 A X107 Power feed contact upper & lower OD8 x ID4 x 10 mmt K.N.M series F004 A Z882 Power feed contact grooved upper & lower OD16 x ID6 x 6.3 mmt W1.4 series F005 A X750 Power feeder contact upper & lower 2.8 mmt x 7.7 mmw x 23 mml Mannual/ F006 A X750 Power feed contact upper & lower 4 x 12 x 30 mm - long length / special type Alpha-C.iA.iB series Mannual/ F006-1(23) A X750 Power feed contact upper & lower 4 x 12 x 23 mm AlphaC.iA.iBseries Mannual/ F006-2 A X107 Power feed contact upper & lower 3 x 12 x 30 mm Alpha-0B.0C series Mannual/ F007 A X759 Power feed contact upper OD15 x ID6 x 6 mmt W0 type
3 Fanuc 12/2 List of wire guide dies F101 F102 F102T A X762 A X763 A X764 A X765 A X766 A X767 A X772 A X773 A X774 A X775 A X776 A X777 A Y775 A Y776 A Y777 Guide diamond upper D=0.055 mm Guide diamond upper D=0.105 mm Guide diamond upper D=0.155 mm Guide diamond upper D=0.205 mm Guide diamond upper D=0.255 mm Guide diamond upper D=0.305 mm Guide diamond lower D=0.055 mm Guide diamond lower D=0.105 mm Guide diamond lower D=0.155 mm O.P.Q.R.T series for taper F103 F103T A X772 A X774 A X775 A X776 A X777 A Y765 A Y766 A Y767 Guide diamond upper D=0.105 mm Guide diamond upper D=0.155 mm Guide diamond upper D=0.205 mm Guide diamond upper D=0.255 mm Guide diamond upper D=0.305 mm Guide diamond upper D=0.205 mm Guide diamond upper D=0.255 mm Guide diamond upper D=0.305 mm T.W series O.P.Q.R series for taper F104 F104T A X732 A X734 A X735 A X736 A X737 A X765 A X766 A X767 Guide diamond lower D=0.105 mm Guide diamond lower D=0.155 mm T.W series T.W series for taper 30Gr. F105 A X443 A X444 A X445 K.M.N.L series F106 A X833 A X834 A X835 Guide diamond upper & lower D=0.205 mm Guide diamond upper & lower D=0.255 mm Guide diamond upper & lower D=0.305 mm K.M.N.L series F107 A X463 A X464 A X465 Guide diamond upper D=0.205 mm Guide diamond upper D=0.255 mm Guide diamond upper D=0.305 mm K.M.N.L series F108 A X753 A X754 A X755 Guide diamond upper & lower D=0.205 mm Guide diamond upper & lower D=0.255 mm Guide diamond upper & lower D=0.305 mm K.M.N.L series F110 F110T A X730 A X732 A X733 A X734 A X735 A X705 A X706 A X707 Guide diamond upper D=0.105 mm Guide diamond upper D=0.155 mm Guide diamond upper D=0.205 mm Guide diamond upper D=0.255 mm Guide diamond upper D=0.305 mm Guide diamond upper D=0.205 mm Guide diamond upper D=0.255 mm Guide diamond upper D=0.305 mm for taper 45Gr
4 Fanuc 12/3 List of wire guide dies F111 A X743 A X744 A X745 F111T A X715 A X716 A X717 for taper 45Gr F112 F112T A X702 A X703 A X704 A X705 A X706 A X707 A X708 A X705 A X706 A X707 Wire guide upper D=0.105 mm Wire guide upper D=0.145 mm Wire guide upper D=0.155 mm Wire guide upper D=0.205 mm Wire guide upper D=0.255 mm Wire guide upper D=0.305 mm Wire guide upper D=0.335 mm Wire guide upper D=0.205 mm Wire guide upper D=0.255 mm Wire guide upper D=0.305 mm for taper 45Gr F113 A X715 A X716 A X717 Wire guide lower D=0.205 mm Wire guide lower D=0.255 mm Wire guide lower D=0.305 mm F113T A Z715 A Z716 A Z717 Wire guide lower D=0.205 mm Wire guide lower D=0.255 mm Wire guide lower D=0.305 mm for taper 45Gr
5 Fanuc 12/4 List of water nozzle parts F124 A Y774 Jet nozzle sapphire insert lower D=1.0 mm F125-1 A Y756 Jet nozzle upper ceramic insert D=1.50 mm F125-2C A Y757 Jet nozzle upper ceramic insert D=0.50 mm Alpha-A.B.C.iA -fine wire option F126 A X723 Nozzle base upper D=58 mm x 19 mml - 4 screw holes F127 A Y723 Nozzle base upper D=58 mm x 19 mml - 5 screw holes Alpha-C.iA.iC series F201 A Y745 Water nozzle upper & lower D=3.0 mm /Special size Water nozzle upper & lower D=4.0 mm /Special size Water nozzle upper & lower D=5.5 mm OD=25 x 16 mmt F201L A Y755 Water nozzle upper &lower long type D=5.5 mm L=5/10/20/30 mm F202 A Y705 Water nozzle lower D=3.0 mm /Special size Water nozzle lower D=4.0 mm /Special size Water nozzle lower D=5.5 mm F202L A Y755 Water nozzle lower long type D=5.5 mm L=5/10/20/30 mm F204 A X870 Not delivery A X879 Water nozzle lower D=13 mm Water nozzle lower D=5.5 mm W-1.4 series F205 A Y611 A X689 Not delivery Water nozzle upper D=5.5 mm Water nozzle upper D=11 mm W-1.4 series F206 A V722 Water nozzle cap upper & lower for F201.F202 Stainless material F206-2 Slide shaft for wire guide / Dies holder F206-Set Nozzle holder assembly F207 A X771 Water nozzle upper D=7.0 mm D=24 x 17 mmt W-0 F208 A X772 Water nozzle lower D=7.0 mm D=26 x 17 mmt W-0
6 Fanuc 12/5 List of water nozzle parts F209 A X772 A X774 A X776 A X777 Nozzle upper D=2 mm Nozzle upper D=4 mm Nozzle upper D=6.5 mm Nozzle upper D=11 mm OD40 x 40 mmt F210 A X755 Nozzle holder lower D=4/16 x 23 mmt D=4 / 6.5 mm F211 A X774 A X774 A X756 Nozzle lower D=2.0 mm Nozzle standard lower D=4.0 mm Nozzle lower D=6.5 mm OD=27 x 16 mmt F212 F213 A X752 A X775 A X775 A X751 A X772 A X774 A X774 A X771 Nozzle upper D=12 mm x 23.5 mmt Nozzle upper D=2.0 mm x 23.5 mmt Nozzle upper D=4.0 mm x 23.5 mmt Nozzle upper standard D=6.5 mm x 23.5 mmt Nozzle lower D=12 mm x 25 mmt Nozzle lower D=2 mm x 25 mmt Nozzle lower D=4 mm x 25 mmt Nozzle lower standard D=6.5 mm x 25 mmt F218 Nozzle OD40 x ID28.5 x 35 mml FE218 Water nozzle upper D=4 mm FE218 A X776 Water nozzle upper D=6.5 mm OD=40 x 30 mml
7 Fanuc 12/6 List of connected parts F301 A X722 Isolation plate lower O.P.Q.R.W.L series F302 A X709 Isolation plate lower F303 A X334 Isolation plate lower W series F303W A X333 Isolation plate lower 56 x 73 x 10 mmt W series semi- A X722 Isolation plate lower 83 x 57 x 6 mmt Material special epoxy resin - grade A (Not ceramic) K series F304 A X602 Isolation plate upper 51 x 33 x 29 mm O.P.Q.R.W series F305 A X509 Isolation plate upper 40 x 40 x 34 mm F305-1 A Guide base upper 70 x 27 x 48 mm Alpha-B series F305-2 A X600 Guide base upper 70 x 27 x 35 mm Alpha-iB series F306 A X312 Isolation plate lower D=72 x 15 mm Alpha-A.B.C series F307 A X761 Guide base lower 75 x 56 x 66 mm F307-1 A X761 Guide base lower 75 x 56 x 66 mm Alpha-C series F307-2 A Y761 Guide base lower 75 x 56 x 66 mm Alpha-iA.iB.iC series F308 A X393 Wire guide Alpha-A.C F400 A97L Bearing 1260Z for F401& F402 W series
8 Fanuc 12/7 List of connected parts F401 A X713 Wire sub roller stainless type OD49 x ID6.5 x 6 mm W series F401A Axle for F401 or F401C W series F401C A X713 Wire sub roller ceramic type OD49 x ID6.5 x 6 mm W series F401-Set A V316 Wire sub roller stainless type full set with axis & bearing W series F401C-Set A V316 Wire sub roller ceramic type full set with axis & bearing W series F402 A X707 Wire sub roller stainless type OD64 x ID6.5 x 6 mm W series F403 A X762 Guide base lower stainless type 40 x 40 x 25 mm F404 A Y770 Lower guide block A stainless 59.5 x 49 x 20 mm Alpha-A.B.C series /Maual F404-1C A X765 Lower ceramic roller 38 x 22 x 12 mm F404-1 A X765 Lower roller stainless 38 x 22 x 12 mm F405 A X394 Feed guide plastic material 13 x 20 x 19 mm Alpha-A.B.C series /Maual F406 A Z382 Pinch roller ceramic D=40 x 20 x 18 mm /Maual F407 A Z383 Feed roller ceramic D=40 x 20 x 19 mm /Maual F408 A X393 Feed wire guide polycarbonate 57 x 20 x 20 mm Alpha-A.B.C series /Maual F409 A X371 Brake shoe upper D=140 x 22 mm series /Maual A X371 Brake shoe / Substitute parts =F409 series /Maual
9 Fanuc 12/8 List of connected parts F409W A V352 Brake shoe upper O.P.Q.T.W series F409WO A V352 Brake shoe upper W0 () series F410 A X382 Pinch roller ceramic without bearing (F502) OD40 x ID28 x 30 mmw Alpha-C series /Maual F410B A V384#STD Pinch roller ceramic with bearing (F502) OD40 x 30 mmw Alpha-C series /Maual F411 A X383 Feed roller ceramic OD40 x 12 x 30 mmw Alpha-C series /Maual F412 A X762 Guide base lower stainless type 46 x 40 x 24.5 mm Alpha-C.iA.iB series /Maual F413 A X382 Pinch roller D=80 x 22 mmw Alpha-0iA.1iA.0iB.1iB /Maual F414 A X383 Feed roller D=80 x 22 mmw Alpha-0iA.1iA.0iB.1iB /Maual F415 A X330 Pinch roller SUS OD80 x ID mm x 18 mmt O.P.Q.T.W series F416 A X331 Feed roller SUS OD80 x ID11 mm x 18 mmt O.P.Q.T.W series F417 A X805 Pinch roller D=60 mm W0 F418 A X806 Feed roller D=60 mm W0 F501 A97L DRF2280H Lower bearing for F F404-1C OD25 x OD22 x ID8 x 7 mmt M422 (608-sus / non-rubber) Alpha-0iA.1iA.0iB.1iB /Maual F502 A97L SS6001LLU Lower bearing for F406.F410 OD=24 x ID12 x 6 mmt (6901RS) Alpha-A.B.C series F503 A97L SS6203LLU Lower bearing FE420 A V742 Roller assembly - right W0
10 Fanuc 12/9 List of connected parts FE421 A V746 Roller assembly - left W0 FE422C Ceramic roller W0 FE704 A X656 Chuck FE705 A X657 Cutting electrode FE706 A x752 Electrode screw FE708 A98L V-packing 4-inch Alpha-0iA FE709 A98L V-packing 6-inch Alpha-1iA A X919 Same as A Y914 A X756 Same as A X774 (F211/D=4 mm) Alpha-A.B.C A X775 Same as A X774 (F209/D=4 mm) Alpha-A.B A X776 Same as A X776 (F209/D=6.5 mm) Alpha-A.B A X715 Same as A X715 (F111T/D=0.205 mm) A X716 Same as A X716 (F111T/D=0.255 mm) A X717 Same as A X717 (F111T/D=0.305 mm) A X715 Same as A Z715 (F113T/D=0.205 mm) A X716 Same as A Z716 (F113T/D=0.255 mm)
11 Fanuc 12/10 List of connected parts A X717 Same as A Z717 (F113T/ D=0.305 mm) A X772 Same as A X772 (F209/D=2mm) A X774 Same as A X774 (F209/D=4 mm) Alpha-C A98L Same as A98L /L3260 A98L Same as A98L /L3330 A X776 Same as A X776 (F209/D=6.5 mm) Alpha-C
12 Fanuc 12/11 List of Belt A X x 1172 mm A X x 1422 mm A X966 upper 13 x 1376 mm A X x 1628 mm A X x 1112 mm W1 A X x 1417 mm W1 A X860 upper 14 x 1315 mm W2 A X861 lower 14 x 1620 mm W2 A X860 upper 21 x 1645 mm W3 A X861 lower 21 x 1962 mm W3 A X860 upper 21 x 2080 mm W4 A X861 lower 21 x 2400 mm W4 A98L L=0.7 X 17 X 4090 mm A98L L=0.7 X 17 X 4300 mm A98L for type 17 x 1870 mm A98L for type 17 x 1930 mm
13 Fanuc 12/12 List of Belt A98L x 3260 mm V A98L x 3330 mm V A98L x 4110 mm A98L x 4290 mm
North American EDM Supplies Inc.
North American EDM Supplies Inc. Wire Guide Parts Nobody beats our quality, service and value Picture Code No. Orignal P/No. Dimension Position Application 101201 A290-8021-X763 A290-8021-X764 A290-8021-X765
More informationEDM Wire Cut Consumables
Brass Wire Sumitomo SBS Sumitomo SBS EDM Wire produces superior results on virtually any wire EDM machine. Sumitomo SBS offers reliability, high performance and value for money. Sumitomo SBS is manufactured
More informationContents. EDM Work Holding...2. EDM Wire Cut Consumables...3. EDM Die Sinking Consumables System 3R...2. Brass Wire...
Contents EDM Work Holding...2 System 3R...2...3 Brass Wire...3 Coated EDM Wire...4 EDM Water and Oil Filters...5 EDM Water Treatment & Cleaning Products...6 Agie Parts...7-9 Charmilles Parts...10-18 Chmer
More informationTeile- und Preisliste Charmilles
Teile- und Preisliste Charmilles bes Funkenerosion GmbH Hafnerweg 3 D 78737 Fluorn-Winzeln Tel.: 07402/9309-17 H. Stängel Fax.: 07402/9309-20 E-mail: rainer.staengel@bes-edm.de Drahtführungen C102/25 100430586
More informationEDM WIRE FILTERS REPLACEMENT PARTS. Lubrication FLYMARKER BRASS & COPPER ELECTRODE TUBING Pinch Rollers DI RESIN
EDM WIRE FILTERS REPLACEMENT PARTS ROCKLINZER POWER FEED CONTACTS DIE GUIDES BELTS GREASE Machine Lighting Sensors DI RESIN DIELECTRIC OIL JOEMARS TR100 TAP REMOVER NOZZLES Lubrication FLYMARKER BRASS
More informationCharmilles - Consumable & Wear Parts
Charmilles-1/9 C003 106462 106.462 Current supply upper & lower OD9.5 x id3.8 mm x 3.0 mm EF-320/330/630/930 249246 249.246 Oil filter cartridge for Erosion EDM Layer type Roboform series C002 806549 806.549
More informationRAISEBORING DRILL PIPES
Secoroc Rock Drilling Tools RAISEBORING DRILL PIPES Catalogue Introducing Raiseboring drill string components Atlas Copco Secoroc has a long history in Raiseboring that finds its roots in the Robbins Raiseboring
More informationNorth American EDM Supplies Inc.
North American EDM Supplies Inc. Nobody beats our quality, service and value Wire Guide Picture Code No. Orignal P/No. 100.431.022 Dimension Φ 0.102 Position Application 101701 200.431.114 Φ 0.152 200.431.112
More informationPROFIMAT MT. Profile grinding with increased profitability. More than Precision
PROFIMAT MT Profile grinding with increased profitability More than Precision PROFIMAT MT Universal state of the art grinding technology for profile grinding applications The multi-talent in profile grinding
More informationSNAKKY SL VOLT - 50 HZ
Мегавенд - интернет-магазин для операторов вендинговой торговли Каталог комплектующих и запасных частей Обновлен на апрель 2003 г. SNAKKY SL - 220 VOLT - 50 HZ Подробнее о данном снековом торговом автомате:
More informationQuicher (NJ-23 / NJ-45 series) (Precision Screw Feeder)
PARTS LIST Quicher (NJ-23 / NJ-45 series) (Precision Screw Feeder) Available models:- NJ-2320, NJ-2323, NJ-2326, NJ-2330 NJ-4535, NJ-4540, NJ-4550, OHTAKE-ROOT KOGYO CO., LTD - - Block "B" Assembly - Circuit
More information2. COMPACT CYLINDERS series STRONG (RS, RQ)
2. COMPACT CYLINDERS series STRONG (RS, RQ) A new series of compact cylinders for long s and heavy-duty applications standard supplied with oversized guides and rods, the first one with adjustable pneumatic
More informationNOVAMATIC 2G / 4G. Internal Grinding
NOVAMATIC 2G / 4G Internal Grinding GRINDING OF STRAIGHT TRACK AND TWO LIPS INTEGRATED ARTICULATED ROBOT FOR WORKPART LOAD AND UNLOAD NOVAMATIC 2G/4G Internal Grinding A range of high productivity internal
More informationBRUN. Part number: 3314A. Type number: 3314A. Lifan X60. Порядок установки
BRUN Part number: 3314A Type number: 3314A Lifan X60 Порядок установки 2012 A 1h D 1705 kg 1500 kg D= 782 kn MAX KG x MAX KG x 000981 75 kg 782 kn MAX KG + MAX KG 88 M6 M8 M10 M12 M12x100/110 M14 M16 M10x125
More informationPart number: Type number: Порядок установки. UAZ Patriot
28 Part number: 6508 Порядок установки Type number: 6508 UAZ Patriot ( е ле ри и) D 2690 kg 1500 kg D= 75 kg 944 kn MAX KG x MAX KG x 000981 944 kn MAX KG + MAX KG 88 M6 M8 M10 M12 M12x100/110 M14 M16
More informationMicrobore Hose, Assemblies & accessories
bar DN2 and DN4 High pressure Microbore hose Technical data Microbore hose The microbore hose assembly, most commonly used to connect to a Minimess test point for pressure testing, has many other diverse
More informationCD-box (in the glove compartment)
Инструкция 9172614 Вариант 1.0 Деталь Номер CD-box (in the glove compartment) страница 1 / 14 Оборудование A0000162 A0000163 M8802509 страница 2 / 14 M8802108 страница 3 / 14 S8802511 страница 4 / 14 S8802510
More informationBRUN. Part number: 1228-A Без электрики With out E-set LADA Priora 2013 (sedan, HB)
BRUN Part number: 18-A Без электрики With out E-set LADA Priora 013 (sedan HB) Порядок установки 013 A 1h D 1555 kg 100 kg D= 50 kg 518 kn MAX KG x MAX KG x 000981 518 kn MAX KG + MAX KG 88 M6 M8 M10 M1
More informationHeavy Duty Actuators CONTROLS. Pneumatic Actuators for Quarter-Turn Valves and Dampers Torques to 1,600,000 in. lbs. Double Acting and Spring Return
CONTROLS Division of A-T Controls Heavy Duty Actuators Pneumatic Actuators for Quarter-Turn Valves and Dampers Torques to,600,000 in. lbs. Double Acting and Spring Return THD S E R I E S The Triac line
More informationRolling technology by FUHR. for wires from Steel Stainless-Steel Copper Aluminium Brass Special alloys UHR
Rolling technology by FUHR for wires from Steel Stainless-Steel Copper Aluminium Brass Special alloys UHR F,a * W,>e Rol(ing м ш O-.Lt. S^Ped Wire Rom,,n 9 Mill 6* ^ ^ ^ WN Profile rolling machine basic
More informationTHE Ultra 4-Link Rear
THE Ultra 4-Link Rear Fully machined lightweight aluminum housing & components 16, 17", 18" and 19" center to center 4-link widths 3/4 thick and internally ribbed faceplate Integral wheelie bar mounts
More informationEASY FEED LITE (HT/TA-MPFDR, FF-30) FRICTION FEEDER PARTS MANUAL. Rev
EASY FEED LITE (HT/TA-MPFDR, FF-30) FRICTION FEEDER PARTS MANUAL Rev 06-29-17 NOTE: This feeder was designed for use with the T-750 (HT20, TA-20) Tabber. Neopost Digital Print Group 3100 Horizon Dr., STE
More informationSNAP ACTION SWITCHES type SAS-00, SAS-03
EN 60947-5- SNAP ACTION SWITCHES type SAS-00, SAS-03 SAS 00 and 03 Series snap-action switches have one NO and one NC contacts. The change of the switching position is realized by the mechanism, which
More informationKnife Gate & Butterfly Valves Data Sheets
Knife Gate & Butterfly Valves Data Sheets Series 80-TP Series 80-TP/XL Series 80-BA Series 80-SS Series 80-SSRS Series 80-DI Series 150 Series 120 Butterfly Valves Series TM-3 & TM-4 Butterfly Valves www.townley.net
More informationLifan Solano (620) sedan
BRUN Part number: 3309A Type number: 3309A Lifan Solano (620) sedan Порядок установки 2008 A 2h D 1555 kg 1200 kg D= 65 kg 664 kn MAX KG x MAX KG x 000981 664 kn MAX KG + MAX KG 88 M6 M8 M10 M12 M12x100/110
More informationECONOMY TWEEZERS. TronexTechnology, Inc Cordelia Rd, Suite 230 Fairield, California USA
ECONOMY TWEEZERS TronexTechnology, Inc. 2860 Cordelia Rd, Suite 230 Fairield, California 94534 USA www.tronextools.com STYLE AA - GENERAL PURPOSE Gold Color Model AA-S2a Model AA-S2b AA S2 Fine General
More informationLarger area of contact, meaning big pushing force with less damage to the surface of the wire.
The Innovation The Planetics drive feeder transports the wire by means of two hyperbolically profiled rollers that in a planetary manner rotate around the welding wire. The drive power is transmitted from
More informationGROUP E EXPLODED VIEW: EV FUEL SYSTEM 2.4L G2 DRAWING #: 0G1151 ITEM PART# QTY. DESCRIPTION
EXPLODED VIEW: EV FUEL SYSTEM 2.4L G2 DRAWING #: 0G1151 GROUP E ITEM PART# QTY. DESCRIPTION 1 026915 2 NIPPLE CLOSE 3/4 X 1.375 2 075580 1 FLANGE FUEL INLET 3 0F6390C 1 REGULATOR ASSY 2.4L (25KW) 0F6390B
More informationSteering wheel mounted remote control for the radio. Steering wheel mounted remote control for the radio V1.0
Инструкция 9172666 Вариант 1.0 Деталь Номер Steering wheel mounted remote control for the radio M3903274 страница 1 / 8 Оборудование A0000162 A0000161 M8802509 страница 2 / 8 M3903275 страница 3 / 8 Введение
More informationAMS Heavy Duty Group Class 4-8 Application Guide
Class 4-8 4-6 Application Guide AMS Heavy Duty Group Class 4-8 Application Guide AMS Heavy Duty Group Class 4-8 Application Guide AMS Heavy Duty Group Class 4-8 Application Guide AMS Heavy Duty Group Class
More informationRotel RSP-1570 RS232 HEX Protocol
Rotel RSP-1570 RS232 HEX Protocol Date Version Update Description February 3, 2012 1.00 Original Specification The RS232 protocol structure for the RSP-1570 is detailed below. This is a HEX based communication
More information32 L 33 L. E2 Right front headlamp unit. E2m1 Right headlamp range adjustment motor. E2e1 Right high beam. E2e2 Right low beam
Document number: pe54.-p-0-99fb Document title: Wiring diagram of front SA control unit with fuse and relay module (N0/) Code: Designation: Coordinates: A0 Explanation of color codes 7 L A5 Rear axle sensor
More informationMANUFACTURERS OF THE MOST COMPLETE LINE OF FLUX HANDLING EQUIPMENT IN THE WORLD PRODUCT SELECTION TOPICS INDEX
PRODUCT SELECTION TOPICS INDEX 1.) Air Powered Flux Recovery for Automatic Welding Heads (Standard Duty)...1-13 2.) Electric Powered Flux Recovery for Automatic Welding Heads (Standard Duty)...13-15 3.)
More informationJuly 2017 TOOLING FOR GENOS L300/L3000 BMT. A Complete Lineup of In-Stock Lathe Tooling for Okuma Two Year Warranty
TOOLING FOR July 2017 GENOS L300/L3000 BMT www.velocityproducts.com A Complete Lineup of In-Stock Lathe Tooling for Okuma Two Year Warranty Velocity Tooling for OKUMA Velocity Products has the largest
More informationTECHNICAL DATA Code No. SFM-OH1 SFM-OH2 SFM-OH3 SFM-OH3S SFM-XHH-10 SFM-XHH-7.5 SFM-XLH
Flow Meter SFM-OH1 SFM-OH2 SFM-OH3 SFM-OH3S SFM-XHH-10 SFM-XHH-7.5 SFM-XLH Gauge SFG-OH1 SFG-OH2 SFG-OH3 SFG-OH3S SFG-XHH-10 SFG-XHH-7.5 SFG-XLH Type OH1 OH2 OH3 OH3 Special XHH 10mm/min XHH 7.5mm/min
More informationHOW TO PROCEED WITH TROUBLESHOOTING
4 TER TER / GAUGE SYSTEM HOW TO PROCEED WITH TROUBLESHOOTING 1 VEHICLE BROUGHT TO WORKSHOP 2 CUSTOR PROBLEM ANALYSIS 3 PROBLEM SYMPTOM CONFIRMATION 4 PROBLEM SYMPTOMS TABLE 5 CIRCUIT INSPECTION 6 REPAIR
More informationOctober 2017 TOOLING FOR LB2000/LB3000 M/MY/MYW. A Complete Lineup of In-Stock Lathe Tooling for Okuma Two Year Warranty
TOOLING FOR October 2017 LB2000/LB3000 M/MY/MYW www.velocityproducts.com A Complete Lineup of In-Stock Tooling for Okuma Two Year Warranty Velocity Tooling for OKUMA Velocity Products has the largest inventory
More informationVertical Grinding Center FVGC-II
Vertical Grinding Center DIMENSIONL DRWINGS C ITEM 110 (2800mm) 3.54 (90mm) C 106 (2700mm) D 87.8 (2230mm) E 59 (1500mm) F 146.8 (3730mm) Note: The manufacturer reserves the right to modify the design,
More informationRotel RSX-1067 RS232 HEX Protocol
Rotel RSX-1067 RS232 HEX Protocol Date Version Update Description February 7, 2012 1.00 Original Specification The RS232 protocol structure for the RSX-1067 is detailed below. This is a HEX based communication
More informationASTRO FF-14NW & FF-14NEW Friction Feeder
ASTRO FF-14NW & FF-14NEW Friction Feeder PARTS CATALOG This manual is intended solely for the use and information of Astro Machine Corp., its designated agents, customers, and their employees. The information
More informationA3 MIG Welder. All-inclusive welding solution for robotic applications. And you know.
All-inclusive welding solution for robotic applications And you know. 2 3 12 9 7 5 4 8 11 1 10 6 1 Power source 7 Wire conduit 2 Wire feeder 8 Wire spool set 3 Wire feeder roller kit 9 Wire feeder mounting
More information8 Sizes of Body Equal Pitch & Un-Equal Pitch. 7 Insert Grades 3 Types of Chip Breaker. No. 332
8 Sizes of Body Equal Pitch & Un-Equal Pitch 7 Insert Grades 3 Types of Chip Breaker No. 332 AFE45 Face Mill Q max High Efficient Jet Air Hole Roughing Semi-Finishing HRC 60 No. of Teeth 4 14 d 2 d 2 d
More informationOEM PN OEM Description Date Of Price R List Quantity (ND) Dimensions OD: 69.2mm; Stator, ND industrial 30-40amp
2/2/25 24- pulleyv 684(ND) Dimensions OD: 69.2mm; 2- Stator, ND industrial 3-4amp 289(ND) 2 v 2- Stator, ND industrial 3-4amp 37(ND) 2 v 22- ROTOR Mfr NIPPONDENSO 343(ND) Dimensions 2 VOLT 45 AMP 22- ROTOR
More informationRotel RSX-1065 RS232 HEX Protocol
Rotel RSX-1065 RS232 HEX Protocol Date Version Update Description February 7, 2012 1.00 Original Specification The RS232 protocol structure for the RSX-1065 is detailed below. This is a HEX based communication
More informationMF7. Hydraulic Lift Pumps and Related Components
Page Hydraulic Pumps 2- Hydraulic Pump Repair Kits - Auxiliary Pumps, Radial Pumps, Filters - Covers - Cylinders Hydraulic Quick Couplers MF Pumps and Related MF 2 & Hydraulic Pumps S.0 Hydraulic Pump
More informationAdditional top escutcheon plates with additional inscription to be clipped on the escutcheons and padlock devices
Accessories FAZ2-8041 218098 Additional top escutcheon plates with additional inscription to be clipped on the escutcheons and padlock devices Order code number Escutcheon frame plate black, legend plate
More information1ZSE en, Rev. 7. Transformer bushings, type GOB Technical guide
1ZSE 2750-102 en, Rev. 7 Transformer bushings, type GOB Technical guide This Technical Guide has been produced to allow transformer manufacturers, and their designers and engineers, access to all the technical
More informationPERFORMANCE : VALUE PRODUCT CATALOG
PERFORMANCE : VALUE by P a r t n e r s i n P r o d u c t i v i t y PRODUCT CATALOG PERFORMANCE : VALUE A Leading Global Producer FEELER is a leading global producer of numerically controlled machine tools
More informationDF 47 DIFFERENTIAL REAR DIFFERENTIAL CARRIER ASSEMBLY REMOVAL
47 REMOVAL 1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL 2. REMOVE REAR WHEEL 3. DRAIN BRAKE FLUID Immediately wash off any brake fluid that comes into contact with any painted surfaces. 4. DRAIN
More informationCoriolis Flow Solutions for a Global Marketplace
Coriolis Flow Solutions for a Global Marketplace www.tricorflow.com DECADES of EXPERIENCE = EXCEPTIONAL RESULTS When you combine decades of experience with truly unique talents, great things can happen.
More informationUnison Corporation. DedTru Centerless Grinding Product Line
Price List PL Unison Corporation DedTru Centerless Grinding Product Line Model C DedTru Grinding Fixture Model PGF Plunge Grind Fixture Model IGF Internal Grind Fixture Model C6 DedTru Grinding Fixture
More information1000 SERIES VERTICAL GRINDING MACHINES
Product Catalog Vertical Grinders 1000 SERIES VERTICAL GRINDING MACHINES The CGC Model 1000 is the core of Campbell Grinder Company s modular machine philosophy. High performance, reliability, and v ersatility
More informationX11CA-IM MASTER MODULE
X11CA-IM MASTER MODULE (Firmware: X11-MF3 Rev. 3) REVISION : 2.0 DOCUMENT NUMBER : X11CA-3000-IOM DATE : April 21, 2003 EDITOR : Nana Lee Ronan Engineering Company APPROVED : Kevin Safayieh 4/23/03 Project
More informationBALL BEARINGS. Single Row - Radial Metric Single Row - Maximum Capacity Single Row - Radial
Single Row - Radial...1.16 Metric... 1.16 Single Row - Maximum Capacity...1.19 Single Row - Radial...1.20 Inch... 1.20 Inch and Inch Bore Metric... 1.21 Single Row - Spherical OD...1.22 Metric... 1.22
More information10/97 N Our policy is one of continued research and development. We therefore reserve the right
ISO Cylinders Magnetic Piston Double Acting Ø 10 to 25 mm Magnetic piston as standard Conforming to ISO 6432 Corrosion resistance Buffer and adjustable cushioned models Supplied complete with nose mounting
More informationTELESCOPIC CYLINDERS ø mm Series RT
TELESCOPIC CYLINDERS 25 63 mm Series RT The overall dimensions are one of the most imporant aspects: in comparison with a traditional ISO cylinder of the same a reduction in size of approx. 45% (with a
More informationGTX Multi-tasking Turning Centers SERIES
GTX-2000 Multi-tasking Turning Centers SERIES Brand New Multi-Tasking Machining Technology New twin spindle and twin turret combination Upper and lower turret can be adjusted based on different machining
More informationLinear Guides Series OSP-P
Linear Guides Series OSP-P NEW NEW Contents Description Data Sheet No. Page Overview.4.E 3-3 Plain bearing guide SLIDELINE.4.E 33-34 Roller guide POWERSLIDE.4.3E 35-38 Ball bushing guide GUIDELINE.4.4E
More informationSSR SSR SSR SSR
DMX 52 Page DMX52 decoder firing board module 20 VAC reference Input 2 3 4 The Thyristor Firing board is compatible withdmx52 control standard 4 DMX52 triggers 2 3 4 - +- +- +- + The can trigger control
More informationTROUBLESHOOTING SPECIAL TOOL ASSEMBLY AND ADJUSTMENT
1 INDEX Models FD, FE, FF and SG REAR AXLE 10-1 10-108E-07 CHAPTER 10 REAR AXLE Models FD, FE, FF and SG TROUBLESHOOTING...10-2 10 SPECIAL TOOL...10-3 WHEEL HUB AND RELATED PARTS DISASSEMBLY...10-7 INSPECTION...10-9
More informationSeries SS19 Institutional Life Safety Mortise Locksets - Levers
Series SS19 Institutional Life Safety Mortise Locksets - Levers Performance Specifications: Life Test: 1,500,000 cycles minimum. ANSI Test: Meets or exceeds all operational and security tests of ANSI specifications
More informationDL601 PARTS MANUAL (T-REX 2001)
DL601 PARTS MANUAL (T-REX 2001) TABLE OF CONTENTS ENGINE ASSEMBLIES: CYLINDER... 2 CRANKSHAFT & PISTON... 4 AIR SHROUD & FAN... 6 OIL PUMP... 8 INTAKE HOUSING & AIR FILTER... 10 CARBURETOR... 11 CRANKCASE...
More informationZNC drilling EDM OPERATION MANUAL EDZNCOMV08UK
OPERATION MANUAL ZNC drilling EDM Unit 3, Hollingdon Depot, Stewkley Road, Soulbury, Nr. Leighton Buzzard, Beds., LU7 0DF. England. Telephone +44 (01525) 270261 Fax +44 (01525) 270235 E-Mail sales@anotronic.com
More information1ZSE en, Rev. 9. Transformer bushings, type GOB Technical guide
1ZSE 2750-102 en, Rev. 9 Transformer bushings, type GOB Technical guide Original instruction The information provided in this document is intended to be general and does not cover all possible applications.
More informationD-1: FAN COVER. DESCRIPTION 1 Asm., Shroud, Upper
D-: FAN COVER Asm., Shroud, Upper 9639-000 Screw, Tappinmg 9390-305068-00K 3 Clamp 9689-000 Plug, Rubber 96339-000 5 Elbow, Outlet 9650-000 6 Bolt 96000-06058-08C 3 7 Cover Set, Fly Wheel 9609-00 8 Cap
More informationSeries 5SS19 Institutional Life Safety Mortise Locksets - Levers
Series 5SS19 Institutional Life Safety Mortise Locksets - Levers Performance Specifications: Life Test: 1,500,000 cycles minimum. ANSI Test: Meets or exceeds all operational and security tests of ANSI
More informationPARTS LIST. Models UT10868 BCS35. i3350b
PARTS LIST Models i0b UT BCS UT d0b UT, UT d0bc UT, UT, UT av UT, UT av w/cc UT, UT, UT, UT i0b UT i0b UT d0b UT0 d0bc UT i0b UT av UT av w/cc UT, UT P/N PS 0 i0b... (cc) BCS... (cc) STARTER - IGNITION
More informationTrick-Tools 75 Truman Road Pella, IA Phone:1-877-VAN-SANT
Distributed by: Trick-Tools 75 Truman Road Pella, IA 50219 Phone:1-877-VAN-SANT E-mail: sales@trick-tools.com Here at Trick Tools we believe that our customers deserve the best value in their tool and
More informationProduct Catalog. EDM Performance Accessories Fax. LOCATIONS NATIONWIDE To order Call
Product Catalog SINCE 1989 EDM Performance Accessories LOCATIONS NATIONWIDE To order Call West Coast 800-336-2946 800-511-5532 562-694-6228 Fax Midwest/East Coast 562-694-6228 Fax Table of Contents TABLE
More information(1) NOTE: PART OF ENGINE MAKE P/N 0F3902. (2) NOTE: I/N 5 IS PART OF I/N 2. (3) NOTE: I/N 55 IS FOR HOLDING SENSOR TO I/N 50. (4) NOTE: NOT SHOWN
(1) 1 0F3883 1 TUBE HEATER WATER (1) 2 0F1960 1 ENGINE 5.4L FORD 3 0F2842 8 IGNITION COIL ASSY FORD 4 0F2843 1 GASKET THERMOSTAT HOUSING FORD (2) 5 0D5419 1 OIL FILTER FORD V-10 ENGINE (1) 6 0F2849 1 TUBE
More informationGTZ-2000 SERIES. Multi-tasking Turning Centers
GTZ-2000 SERIES Multi-tasking Turning Centers Brand New Multi-Tasking Machining Technology New twin spindle and twin turret combination Upper and lower turret can be adjusted based on different machining
More informationSPAIR PARTS FOR DIESEL ENGINE CHN 25/34 - for one overhaul 8 cylinder engine. КОМПЛЕКТ ЗАПАСНЫХ ЧАСТЕЙ ДЛЯ ДВИГАТЕЛЯ 8ЧН 25/ одна моточистка.
SPAIR PARTS FOR DIESEL ENGINE CHN 25/34 - for one overhaul 8 cylinder engine. КОМПЛЕКТ ЗАПАСНЫХ ЧАСТЕЙ ДЛЯ ДВИГАТЕЛЯ 8ЧН 25/34-2 - одна моточистка. Contact: brovertek@gmail.com Ask price and terms of delivery.
More informationRotel RSX-1055 RS232 HEX Protocol
Rotel RSX-1055 RS232 HEX Protocol Date Version Update Description February 2, 2012 1.00 Original Specification The RS232 protocol structure for the RSX-1055 is detailed below. This is a HEX based communication
More informationGTZ SERIES. Multi-tasking Turning Centers
GTZ SERIES Multi-tasking Turning Centers BRAND NEW MULTI-TASKING MACHINING TECHNOLOGY New twin spindle and twin turret combination Upper and lower turret can be adjusted based on different machining requirements
More informationExpansion. Achieves high-efficiency milling with v f of over 20,000mm/min thanks to its multi-edge design (3 edges per inch).
igh Efficiency Cutter for F Type Expansion General Features The F type high efficiency cutter for aluminum alloy achieves machining without burrs using a unique insert shape. ew FF types with oil holes
More informationROTARY SHAFT / OIL SEALS GASKETS LINER RINGS REPAIR KITS BONDED SEALS O RINGS. Automotive Seals VW BARNWELL THE SEAL OF APPROVAL
ROTARY SHAFT / OIL SEALS GASKETS LINER RINGS REPAIR KITS BONDED SEALS O RINGS Automotive Seals VW BARNWELL THE SEAL OF APPROVAL QUALITY AND SERVICE GUARANTEED Total Sealing Solutions Founded in 1972, M
More informationModel FF8000 Flange Facer
Model FF8000 Flange Facer Machine Features Components & Accessories Specifications Technical Data Portable Machine Tools, Inc. Get big flange faces back in working condition - FAST! FF8000 Features Versatile
More informationCopyright EXTRON All rights reserved E-M-EN EXTRONCNC.com
YIH CHUAN MACHINERY INDUSTRY CO., LTD HEADQUARTERS 40755 No.8, 9 Rd., Taichung Industrial Park, Taichung, Taiwan T e l : +886-4-2359-3351 Fa x : +886-4-2359-0012 E-mail : extron@extroncnc.com th YIH CHUAN
More informationMLR Series Institutional Life Safety Mortise Locksets Levers
MLR Series Institutional Life Safety Mortise Locksets Levers Performance Specifications: Life Test: 1,500,000 cycles minimum. ANSI Test: Meets or exceeds alll operational and security tests of ANSI specifications
More informationATS-9800 DUAL TABBER
ATS-9800 DUAL TABBER Parts Manual This manual is intended solely for the use and information of Astro Machine Corp., its designated agents, customers, and their employees. The information in this guide
More informationLand Area : 215,000 ft 2. Land Area : 200,000 ft 2. Land Area : 286,000 ft 2. Land Area : 5,400 ft 2 Land Area : 719,000 ft 2
TURNING CENTERS by MACHINING CENTERS by YAMA SEIKI USA belongs to the GMT (GOODWAY Machine Tools) Group, which includes well-known machine tool manufacturers, GOODWAY, AWEA and EXTRON. The GMT Group has
More informationDF 15. DIFFERENTIAL 1GR-FE FRONT DIFFERENTIAL CARRIER ASSEMBLY (for 4WD) REMOVAL
DIFFERENTIAL 1GR-FE FRONT DIFFERENTIAL CARRIER ASSEMBLY (for 4WD) 15 REMOVAL 1. REMOVE FRONT WHEELS 2. REMOVE REAR ENGINE UNDER COVER ASSEMBLY (a) Remove the 6 bolts and engine under cover assembly. 3.
More informationTIP TIG HOTWIRE 18 SUPER COOL TORCH. Materials: Steel/Stainless/Aluminum Duty Cycle 400A / 100% INTERNAL PARTS
TIP TIG HOTWIRE 18 SUPER COOL TORCH Materials: Steel/Stainless/Aluminum Duty Cycle 400A / 100% COMPLETE TORCH ASSEMBLY 10002461 TIP TIG 18 SC HW TORCH WITH ORANGE LINER (14FT) $995.00 ea. 10002465 TIP
More informationKICK STARTER/DRIVE PULLEY/ CLUTCH/DRIVEN PULLEY SERVICE INFORMATION TROUBLESHOOTING KICK STARTER DRIVE BELT...
8 KICK STARTER/DRIVE PULLEY/ 8 SERVICE INFORMATION... 8-2 TROUBLESHOOTING... 8-2 KICK STARTER... 8-3 DRIVE BELT... 8-7 DRIVE PULLEY... 8-9 STARTER ONE-WAY CLUTCH DRIVE GEAR... 8-11... 8-14 8-0 Torque:
More informationThere are many pre-designs of Vulkan launcher.
There are many pre-designs of Vulkan launcher. This is next one: ge A(x8) - h=45 m, d=3,9 m ge B - h=57 m, d=7,75 m ge C - h=27 m, d=7,75 m escape syem - h=3,8 m, d=1,1 m Model 1 H ~920 mm Paper used:
More informationCX 4 Heavy Duty Precision CNC Lathe
X 4 The X Series heavy duty precision N lathe by Kingston is designed for heavy and long work pieces for the energy, mining, textile, paper, and transportation industries. Utilizing the same headstock
More informationРазмеры ковров Camoplast
Teo Lehtimäki Oy Размеры ковров Camoplast На обложке Брюс Дашноу На следующих страницах Вы найдете техническую таблицу гусеничных ковров мотосаней с указанными размерами. Внизу фотографии с типами ковров.
More informationSerial Number: Date of Purchase:
Congratulations on the purchase of your Ground Logic, Inc. machine. This product has been carefully designed and manufactured to be a dependable piece of equipment that will provide years of trouble-free
More informationJuly 2018 ONLY FOR LT2000 M/MY. A Complete Lineup of In-Stock Lathe Tooling for Okuma Two Year Warranty
ONLY FOR OKUMA July 2018 LT2000 M/MY www.velocityproducts.com A Complete Lineup of In-Stock Tooling for Okuma Two Year Warranty Velocity Tooling: Only for Okuma Velocity Products has the largest inventory
More informationSALFORD TILLAGE 870 DISC ' & 35 MODELS 9" C-FLEX ASSEMBLY AND PARTS MANUAL SPECIALISTS. Подбор запасных частей на сайте:
SALFORD TILLAGE SPECIALISTS Подбор запасных частей на сайте: http://texagropark.ru 870 DISC 2007 32' & 35 MODELS 9" C-FLEX ASSEMBLY AND PARTS MANUAL Лесных Павел Владимирович Тел. 903-030-15-51 E-mail:
More informationReplacing the pick rollers P.N X
Instruction Sheet Replacing the pick rollers P.N. 118-9717-0X For assistance while replacing the pick rollers, contact you local Tektronix representative. In the U.S. and Canada, call 1-800-835-6100. 1.
More informationBRUSHCUTTERS BCZ3000DL BCZ3000DW
848JC293B0 (401) BRUSHCUTTERS BCZ3000DL BCZ3000DW NOTE : 1. Use KOMATSU ZENOAH genuine parts as specified in the parts list for repair and/or replacement. 2. KOMATSU ZENOAH does not warrant the machines,
More informationAugust 2018 ONLY FOR MULTUS U3000/U4000/U A Complete Lineup of In-Stock Lathe Tooling for Okuma Two Year Warranty
ONLY FOR OKUMA August 2018 MULTUS U3000/U4000/U5000 www.velocityproducts.com A Complete Lineup of In-Stock Tooling for Okuma Two Year Warranty Velocity Tooling: Only for Okuma Velocity Products has the
More information4g.1 - Flatbed Feeder Main Assembly A4440A
PAGE NO. 1 OTHER ASSEMBLIES NOT SHOWN ON THIS DRAWING: A7029A - LONG CONVEYOR ASSEMBLY - SECTION 4g.2 A7101A - SEPARATOR (FB) ASSEMBLY - SECTION 4g.8 A7103A - CHASSIS ASSEMBLY - SECTION 4g.9 A7107A - TOP
More informationTECHNICAL CHARACTERISTICS
2 or 3-stage telescopic pneumatic cylinder Considering its high technological contents, this cylinder series represents without doubt the product with the highest degree of technical research and evolution
More informationSTANDARD PRODUCT OFFERING CATALOG Special items not displayed in this catalog are available upon request.
STANDARD PRODUCT OFFERING CATALOG Special items not displayed in this catalog are available upon request. We Control Movement ER Wagner has been designing, developing, and supplying high-quality casters
More informationGeneral Specifications
General Specifications Models RM and RH Resistance Temperature Sensor GS 06B03B01-00E GENERAL Model RM and RH Resistance Temperature Sensors (RTSs) have a platinum resistance element (Pt 100 or 50 ) in
More informationCNC Double Column Machining Center. SDV-H Series SDV Series.
CNC Double Column Machining Center www.sigmacnc.com.tw Special Patent Design Construction Features The Motion of Z-axis is Supported by 2 Linear Guideways The Motion of Z-axis is Supported by 4 Linear
More informationInstruction Manual HAND PALLET TRUCK HP SERIES A. Note: Owner/Operator must read and understand this instruction
Instruction Manual HAND PALLET TRUCK HP SERIES A Note: Owner/Operator must read and understand this instruction manual before using the hand pallet truck. Thank you for choosing our pallet truck. For your
More informationNOVAMATIC PGE. High-productivity External Grinders
NOVAMATIC PGE High-productivity External Grinders GRINDING OF OUTSIDE DIAMETER AND TWO LIPS ON BEARING INNER RINGS FOR THE EARTH MOVING INDUSTRY PROFILED WHEEL FOR GRINDING OF STRAIGHT TRACKS ON BEARING
More information