THE Ultra 4-Link Rear

Size: px

Start display at page:

Download "THE Ultra 4-Link Rear"

Judith Lamb
5 years ago
Views:

THE Ultra 4-Link Rear Fully machined lightweight aluminum housing &

and internally ribbed faceplate Integral wheelie bar mounts Housing and

bearings with billet spindle nut and pre-load spacer Available for full

1 THE Ultra 4-Link Rear Fully machined lightweight aluminum housing & components 16, 17", 18" and 19" center to center 4-link widths 3/4 thick and internally ribbed faceplate Integral wheelie bar mounts Housing and 4-link plates are lugged for greater strength Pre-loaded spindle bearings with billet spindle nut and pre-load spacer Available for full floating or -piece axles Steel or carbon brake kits H Pro-mod aluminium Page 1

2 Instruction packet: pg. 3 - Kit overview pg. 4-4-Link plate dimensions pg. 5 - Housing dimensions pg. 6 - Face plate and end bell stud installation pg. 7 - Endbell and mounting brackets assembly pg. 8 - Full floating axle assembly pg. 9 - Full floating axle parts list pg Piece axle assembly pg Brake kit options 8300 North Austin Ave Morton Grove, IL Page

3 Full Floating Axle Wheel Studs Drive Hub Wheel Mounting Surface A B C Drive Plate ROTOR HAT THICKNESS 0.5 WHEEL THICKNESS E Studs A B C Lug nuts F058BSP 1.90" 0.65" 0.50 steel F058BAP 1.90" 0.65" n/a aluminium F058BLP.65" 1.65" steel For wheel stud replacement please contact Strange Engineering Steel & aluminum lug nut torque: 130 ft-lbs Piece Axle Wheel Studs G H Lock Nut 95 ft-lbs D Kit overview Full Floating Axle Assembly Options 4-link plate Brakes Bolt circles Lug nuts -Piece axle assembly options Lug nuts Bearing Brakes Bolt circles 4-link plate 4-Link CTC (Center to Center) Wheel to wheel widths 4.75 Aluminium Dual row ball 31.50" 16 standard Steel ( pc. rotor) 3.50" 16,17 reinforced 5.00 Steel Spherical 33.50" 17,18 no plates Carbon Custom misalignment B.C Available 34.50" 18,19 Adj Shock Height 35.50" 19,0 Mount 36.50" 0, " 1, Axle Flange 4-Link CTC (Center to Center) Wheel to wheel widths Standard 11.50" Steel 4.75 Aluminium 31.75" 16 Reinforced 11" Carbon 5.00 Steel 3.75" " Only available for WTW widths 31.75"-40.75" No plates Adjustable Shock Height Mount 33.75" 16, " " 17, " " 18,0 36.5" " 19,1 37.5" " 0, 38.5" " 1,3 39.5" Note: All WTW widths have the option to be shortened by 1/" by taking material off from the Endbells 39.75" 40.5" " " " " " " " " 48.00" 3 Wheel Stud 0.81 Studs D E F G H A A A1037MD Ensure measurement "D" is able to fully engage into the wheel. The "D" dimension needs to be slightly greater than combined thickness of the brake rotor hat and thickness of the wheel Lug nut torque: 130 ft-lbs Wheel Stud Torque: 50 ft-lbs Lock Nut Torque: 95 ft-lbs F Page ", " 3

Page 4 - weld-on bosses double plate thickness at mounting points to increase strength reinforced 4-link plate option WISHBONE Standard 4 Link Plate 1 4 3 5 6 WHEEL TO WHEEL CENTER TO CENTER LOWER

4 Page 4 - weld-on bosses double plate thickness at mounting points to increase strength reinforced 4-link plate option WISHBONE Standard 4 Link Plate WHEEL TO WHEEL CENTER TO CENTER LOWER WISHBONE MOUNT F18 S340N H1180V H1180MP1AS H1180U H1180VA Componant Part # /8-4 Jet Nut 3/8 AN Washer Shock mount HD 4-Link mount plates(4x) -Adj. Shock mount 4-Link spacer plate Adj. Shock mount 3/8-4 x 1.641" Bolt Qty Description WISHBONE TYP. X.505 HOLES.750 TYP. 4X.505 HOLES Adjustable shock mount plate parts list TYP. 7X UPPER WHEELIE BAR MOUNT Link Plate with Adjustable shock mount 4-Link plate dimensions

5 CENTER TO CENTER BOLT UPPER WHEELIE BAR MOUNT LOWER WISHBONE MOUNT Housing dimensions Ring gear clearance revisions Date manufactured Ring gear clearance /11-10/ /11 - present Notes: SAE 85W-140 nonsynthetic gear oil is recommended H1180 housings require 3 quarts of gear oil. WHEEL TO WHEEL Page 5

Face plate and endbell stud installation If the housing end bell studs (1,) or face plate studs (3,4) have not been pre-installed by Strange Engineering refer to the diagrams below to ensure the

- red Loctite must be used on the studs (not nuts) note: face plate studs must be hand tightened DO NOT torque them 85ft-lbs anitseize 75ft-lbs anitseize note: jets nuts are not installed from the

6 Face plate and endbell stud installation If the housing end bell studs (1,) or face plate studs (3,4) have not been pre-installed by Strange Engineering refer to the diagrams below to ensure the proper length studs are installed in corresponding locations. The blue and red colors indicate the variations of stud and bolt lengths. - red Loctite must be used on the studs (not nuts) note: face plate studs must be hand tightened DO NOT torque them 85ft-lbs anitseize 75ft-lbs anitseize note: jets nuts are not installed from the inside of the flange in locations of L4000B (4) Red Loctite Red Loctite 1 Red Loctite Red Loctite 1a H1180D 3 Housing Tube Stud.906 Long 1b H1180D1 3 Housing Tube Stud Long (34.75 WTW) a H1180C 13 Housing Tube Stud 3.31 Long b H1180C1 13 Housing Tube Stud Long (34.75 WTW) 3 L4000B1 8 Face Plate Stud 3/8-4 x.15 4 L4000B Face Plate Stud 3/8-4 x H1150E 10 3/8-4 x 0.50 Thread Inserts 6 H1180J 7 1/-13 x.5 1 Point Screw 7 A106B 8 1/ Flat Washer 8 H1180K 1 1/-13 x 1 Point Screw 9 F /8-4 Jet Nut 10 S340N 10 3/8 Washer Page 6

7 Endbell and mounting brackets assembly * ft-lbs 6 85 ft-lbs anti-seize ft-lbs /* /*31 1, 18 19,0 11a F094CR " End Bell (RH) 11b F094CR " End Bell (RH) 11c F094CR " End Bell (RH) 1 H1180Q 16 1/-0 1 Point Nut 13 H1180O O-Ring End Bell 14 H1180M 6 5/ Point Nut 15 S3800W 6 5/16 Washer 1/16 Thick 16 H1180B Four Link Spacer Plate 17 H1180L 6 5/16-4 x Point Screw 18 H1180G 1 Wishbone Retainer 19a H1180E 1 Bottom Brace for 16" Center to center 19b H1180E1 1 Bottom Brace for 17" Center to center 19c H1180E 1 Bottom Brace for 18" Center to center 19d H1180E3 1 Bottom Brace for 19" Center to center 0 H1180N 1 1/-0 X 0.650" Big Sert 1 H1180I 1 Drain Plug H1108IW 1 Drain Plug Gasket 3 H1180F 1 Fill Plug 4 H1180H 1 Fill Plug O-Ring 5 H1180P 1 1/8" NPT Breather 6a H1180A " Modular Housing 6b H1180T " Modular Housing 7 H1180RR 1 Housing Extension Spacer (RH) 8 H1180RL 1 Housing Extension Spacer (LH) 9 H1180MP1A 4 4-Link Mount Plate 30 H1180MP1HDRO 1 HD 4-Link Mount Plate (RH outside) 31 H1180MP1HDRI 1 HD 4-Link Mount Plate (RH inside) 3 H1180MP1HDLO 1 HD 4-Link Mount Plate (LH outside) 33 H1180MP1HDLI 1 HD 4-Link Mount Plate (LH inside) 34a F094CL " End Bell (LH) 34b F094CL " End Bell (LH) 34c F094CL " End Bell (LH) Page 7

8 Page 8 spindle 1 spindle retainer nut set screw housing ft-lbs red loctite hand-tight anti-seize ft-lbs 51, ft-lbs 36, ft-lbs ft-lbs Ensure set screw engages into the spindle nut retainer red loctite 54 hand-tight Press the spindle (53) into the endbell and align the threaded holes. Then slide the caliper bracket (51) on.. Align the threaded holes in the endbell with the holes in the caliper bracket and spindle flange. 3. Install the six flat head screws (50) and torque to 40 ft-lbs. 4. The spindle retainer nut (55) is installed using the provided wrench. Apply antiseize on the threads of the spindle retainer nut. 5. Torque spindle retainer nut to 150 ft-lbs and align two opposing holes in the retainer nut to mate with the threaded holes in the housing. 6. Apply loctite to a set screw (54) and hand tighten to secure assembly. 1. Slide the spindle nut retainer (4) onto the spindle ensuring the notches on the retainer and slots on the spindle are oriented properly.. Install the spindle nut (41) using the provided wrench. Spindle nuts are torqued to ft-lbs. 3. Ensure to align two opposite holes on the spindle nut and retainer for installation of set screws. 4. Thread the set screws opposite one another into the spindle nut. Ensure screws engage into spindle nut retainer. 5. Rotate hub several times to ensure everything is seated. Tools (included with all kits) F058W- Spindle Nut Wrench for 4-3/4 & 5 B.C. F056M- Spindle Nut Wrench for 5-1/ B.C. Spindle Nut Installation note: pack the bearings (44) with grease 46,47 Tools (included with all kits) F058W- Spindle Nut Wrench for 4-3/4 & 5 B.C. F056M- Spindle Nut Wrench for 5-1/ B.C. 1 Spindle Retainer Nut Installation Full floating axle assembly

9 Full floating axle assembly 35 A1050D 6 1/4-8 x 3/4 SHCS 36 A1RS Race Decal 37 F054B 40 Spline Floater Cap 38 F00B Drive Cap O-Ring #03 39 F00C x 3/4 FHSCS 40a F060A 4.75 B.C. Scalloped Driveplate 40b F058A 5.00 B.C. Scalloped Driveplate 40c F056A 5.50 B.C. Scalloped Driveplate 41a F058C 4.75 & 5.00 B.C. Spindle Nut 41b F056C 5.50 B.C. Spindle Nut 4a F058D 4.75 & 5.00 B.C. Spindle Nut Retainer 4b F056D 5.50 B.C. Spindle Nut Retainer 43a F109C 4.75 & 5.00 B.C. Hub O-Ring 43b F B.C. Hub O-Ring 44a F170 see note 4.75 & 5.00 B.C. Outer Bearing Cone L b F056I see note 5.50 B.C. Inner & Outer Bearing Cone L a F058E 4.75 & 5.00 B.C. Preload Spacer 45b F056E 5.50 B.C. Preload Spacer 46a F060H 4.75 B.C. Floater Drive Hub 46b F058H 5.00 B.C. Floater Drive Hub 46c F056P 5.50 B.C. Floater Drive Hub 47a F171 see note 4.75 & 5.00 B.C. Outer Bearing Cup L b F056J see note 5.50 B.C. Inner & Outer Bearing Cup L F056K Hub Seal SKF F056B Spindle Ring 50 F058G 1 3/8-16 x 1-1/ FHSCS 51a F056O Caliper Mounting Bracket (Steel Brakes) 51b F056F Caliper Mounting Bracket (Carbon Brakes) 5 B1301E 4 3/8-4 Press Nut 53a F094A " Spindle 53b F094A " Spindle 53c F094A 10.00" Spindle 53d F094A " Spindle 4.75" & 5" B.C 53e F09A " Spindle 53f F094A " Spindle 53g F09A /3" Spindle 53h F09A /3" Spindle 53i F09A /3" Spindle 53j F09A /3" Spindle 5.5" B.C 53k F09A /3" Spindle 53l F09A /3" Spindle 54 F056L 8 1/4-0 x 5/16 Dog Pt. Set Screw 55 F094B Spindle Retainer Note: 5.50 B.C. Kits include a quantity of 4 F056I & F056J 4.75 & 5.00 B.C. Kits include a quantity of F056I, F056J, F170 & F171 Page 9

10 -Piece axle assembly , axle bearing bearing retainer see note 57 axle flange axle lock nut screw lock collar ft-lbs ft-lbs Axle lock nut (5) should be torqued to 50 ft-lbs. Then add additional torque until holes in the lock collar match either pair of threaded holes in the flange. Check and retorque axle lock nut periodically Tools: WJ11 - Axle lock nut tool (included with kit) WJ13 - Axle holder (optional) If the optional WJ13 tool is not being used install the axle in the spool and then torque the axle nut. 56 WJ x 1/ SHCS 57 WJ08 Lock Collar 58 WJ04 Axle Lock Nut 59a WJ B.C. Axle Flange Passenger Side 59b WJ B.C. Axle Flange Passenger Side 60 WJ01 Seal National # WJ100D 1 5/16-18 x 1-3/4 SHCS 6 WJ100AR 1 Passenger Side Bearing Retainer 63 WJ036 4 O-Ring #153 64a WJ00 Spherical Misalignment Bearing 64b WJBB Ball Bearing 65a WJ0BR 1 Passenger Side Caliper Mounting Bracket (Steel Brakes) 65b WJ100BR 1 Passenger Side Caliper Mounting Bracket (Carbon Brakes) 66a WJ0BL 1 Driver Side Caliper Mounting Bracket (Steel Brakes) 66b WJ100BR 1 Driver Side Caliper Mounting Bracket (Carbon Brakes) 67 WJ100AL 1 Driver Side Bearing Retainer 68a WJ B.C. Axle Flange Driver Side 68b WJ B.C. Axle Flange Driver Side 69a WJ100CR " pc. Axle End Bell Passenger Side 69b WJ10CR " pc. Axle End Bell Passenger Side 70a WJ100CL " pc. Axle End Bell Driver Side 70b WJ10CL " pc. Axle End Bell Driver Side Page 10

11 Brake kit options Full Floating Axle Steel & Carbon Brake Assembly 73/ ft-lbs 7 Brake Caliper 79/80,81 8/83 35 ft-lbs Notes: - Consult B1850 B1855 Strange Four Piston Directional Caliper and Ultra Caliper (Black Calipers) B5044, B5045, B5046, B5040, B504 instructions -Piece Axle Steel & Carbon Brake Assembly C1700D 0 1/4-0 x 1/ FHSCS 7 C1700H Retainer Ring 73a F056NR Rear Rotor RH 73b F056NL Rear Rotor LH 74 C Carbon Rotor 75 B794B Rotor Adapter 76 B794A Brake Rotor 77 B794D Spirolock 78a C1700B B.C. Carbon Adapter RH 78b C1700C B.C. Carbon Adapter LH 78c C1700F B.C. Carbon Adapter RH 78d C1700G B.C. Carbon Adapter LH 79 B Four Piston Caliper w/ Metallic Pads 80 B5040 Four Piston Carbon Caliper 81 L4050HS 4 Carbon Soft Pad 8 B5000Y 4 3/8-4 x 1.15 HHSC (included in B1855 kit) 83 B5000X 4 3/8-4 x 1.7 Bolt 71 7 ft-lbs Page 11

SITRANS F flowmeters. SITRANS F O delta p - Primary differential pressure devices. Orifice plate with annular chambers. 4/358 Siemens FI

SITRANS F flowmeters. SITRANS F O delta p - Primary differential pressure devices. Orifice plate with annular chambers. 4/358 Siemens FI Application Dimensional drawings Suitable for non-corrosive and corrosive gases, vapors and liquids; permissible operating temperature -60 to +550 C. Design Two support rings with replaceable orifice disk