Knife Gate & Butterfly Valves Data Sheets
|
|
- Piers Lyons
- 6 years ago
- Views:
Transcription
1 Knife Gate & Butterfly Valves Data Sheets Series 80-TP Series 80-TP/XL Series 80-BA Series 80-SS Series 80-SSRS Series 80-DI Series 150 Series 120 Butterfly Valves Series TM-3 & TM-4 Butterfly Valves
2 Series 80-TP Towniprene Lined Knife Gate Valves MATERIALS OF CONSTRUCTION MODEL 80 TP 1 GATE SS 2 BODY DI 3 SEAT 4 BOLTS 5 PACKING 6 GLAND 7 STEM 8 YOKE TOWNIPRENE SS TLSP* DI SS DI 9 STEM NUT BRONZE 10 HANDWHEEL DI *TLSP = TFE Lubricated Synthetic Packing Normally supplied with handwheel for manual operation, but can be modified for chain wheel, bevel gear, fail safe spring cylinder, electric motor, hydraulic or pneumatic cylinder operator. DIMENSIONS (INCHES) AND WEIGHTS SIZE FACE-TO-FACE F-F 1-7/ /2 2-3/4 2-3/ /2 3-1/2 4-1/2 4-1/2 FLANGE OD OD 6 7-1/ / / /2 32 BOLT CIRCLE BC 4-3/ /2 9-1/2 11-3/4 14-1/ /4 21-1/4 22-3/ /2 FLANGE RAISED FACE RF 3-1/4 4-1/4 6-3/16 8-1/2 10-5/8 12-3/ / / /4 22-1/2 27 INSIDE DIAMETER ID / /4 9-3/4 11-3/4 13-1/ /4 19-1/4 23-1/4 NO. OF BOLT HOLES N HOLE D&T SIZE d 5/8"-11 5/8"-11 5/8"-11 3/4"-10 3/4"-10 7/8"-9 7/8"-9 1"-8 1"-8 1-1/8"-7 1-1/8"-7 1-1/4"-7 C/L TO TOP-CLOSED H-CLS 13-7/8 14-5/8 17-1/4 20-1/8 24-3/ /8 36-3/ /4 58-3/4 C/L TO TOP-OPEN H-OPN / / /2 32-5/ /4 56-1/4 64-1/2 72-1/4 82-1/4 HANDWHEEL DIA. H/W WEIGHT - LB'S WT STROKE S 2-1/8 3-1/ /16 6-3/8 8/1/ /8 13-1/2 15-1/4 17-1/2 20-1/2 23-1/2
3 Series 80-TP/XL Towniprene Lined Knife Gate Valves 3 4 ID 3 4 F/F 6 7/8 6 7/8 BC 6 7 1/2 FOD N (4) 3/4 (8) 3/4 HW 8 8 H-CLS 14 13/ /32 H-OPN Wgt# (weights approximate) / (8) 7/ / /4 11 3/ (8) 7/ / /8 14 1/4 16 (12) / Valve Size / (12) / /8 18 3/ / /4 22 3/ / /8 29 1/ (12) 1-1/8 (16) 1-1/8 (16) 1-1/4 (20) 1-1/4 (20) 1-3/8 36 3/ /4 58 3/4 54 1/4 56 1/ /4 82 1/
4 Series 80-BA Severe Duty Knife Gate Valves MATERIALS OF CONSTRUCTION MODEL 80 BA 1 GATE SS 2 BODY DI 3 SEAT TOWNIPRENE 4 WEAR LINER HIGH CHROME IRON 5 BOLTS SS 6 PACKING TLSP* 7 GLAND DI 8 STEM SS 9 YOKE DI 10 STEM NUT BRONZE 11 HANDWHEEL DI URETHANE SEAT HIGH-CHROME IRON INSERT DUCTILE IRON VALVE BODY *TLSP = TFE Lubricated Synthetic Packing. Normally supplied with handwheel for manual operation, but can be modified for chain wheel, bevel gear, fail safe spring cylinder, electric motor, hydraulic or pneumatic cylinder operator. DIMENSIONS (INCHES) AND WEIGHTS FACE-TO-FACE FLANGE OD BOLT CIRCLE FLANGE RAISED FACE INSIDE DIAMETER NO. OF BOLT HOLES HOLE D&T SIZE C/L TO TOP-CLOSED SIZE F-F OD BC RF ID N d H-CLS /2 2-3/4 2-3/ /2 3-1/2 4-1/2 4-1/2 7-1/ / / / /2 9-1/2 11-3/4 14-1/ /4 21-1/4 22-3/ / /16 8-1/2 10-5/8 12-3/ /4 18-3/4 20-1/4 22-1/ /4 3-3/4 5-3/4 7-3/4 9-3/4 11-3/ /8"-11 5/8"-11 3/4"-10 3/4"-10 7/8"-9 7/8"-9 1"-8 1"-8 1-1/8"-7 1-1/8"-7 1-1/4" /8 17-1/4 20-1/8 24-3/ / /4 58-3/4 C/L TO TOP-OPEN H-OPN 17-11/ / /2 32-5/ /4 56-1/ /4 82-1/4 HANDWHEEL DIA. WEIGHT - LB'S STROKE H/W WT S gear op gear op gear op gear op gear op / /16 6-3/8 7-7/ /8 14-1/4 15-1/4 17-1/4 20-1/4 23-1/2
5 Series 80-DI Knife Gate Valves Materials of Construction Model 80-DI 1 Gate SS 2 Body DI 3 Seat Natural Rubber* 4 Bolts Stainless 5 Packing TLSP** 6 Gland DI 7 Stem SS 8 Yoke DI 9 Stem Nut Bronze 10 Handwheel DI * Buna-N and EPDM seats also available. **TLSP = TFE Lubricated Synthetic Packing. Normally supplied with handwheel for manual operation, but can be modified for chain wheel, bevel gear, fail safe spring cylinder, electric motor, hydraulic or pneumatic cylinder operator. Dimensions (Inches) and Weights Size Face-to-Face F-F 1-7/ /4 2-3/4 2-3/ /2 3-1/2 4-1/2 4-1/2 Flange OD OD 6 7-1/ / / /2 32 Bolt Circle BC 4-3/ /2 9-1/2 11-3/4 14-1/ /4 21-1/4 22-3/ /2 Flanged Raised Face RF 4-1/ /16 8-1/2 10-5/8 12-3/ / /4 Inside Diameter ID 2 3-1/ /4 15-3/4 17-3/ / /8 No. of Bolt Holes N Hole D&T Size D 5/8-11 5/8-11 5/8-11 3/4-10 3/4-10 7/8-9 7/ / / /4-7 C/L to Top-Closed H-CLS /4 16-9/ /2 24-1/ / /2 51-7/8 60 C/L to Top-Open H-OPN /4 20-9/ /2 32-1/2 39-1/ / / / /8 Handwheel Dia. H/W Weight - lbs WT Stroke S /4 10-1/4 12-3/8 14-1/ / /
6 Series SSRS Knife Gate Valves MATERIALS OF CONSTRUCTION MODEL SSRS 1 GATE SS 2 BODY SS 3 SEAT Buna-N** 4 BOLTS SS 5 PACKING TLSP* 6 GLAND SS 7 STEM SS 8 YOKE SS 9 STEM NUT BRONZE 10 HANDWHEEL DI *TLSP = TFE Lubricated Synthetic Packing. **EPDM, Neoprene, Viton, and other seating Stocked in 304 and 316 SS. 317 SS Available. Normally supplied with handwheel for manual operation, but can be modified for chainwheel, bevel gear, fail safe spring cylinder, electric motor, hydraulic or pneumatic cylinder operator. DIMENSIONS (INCHES) AND WEIGHTS SIZE FACE-TO-FACE F-F 1-7/ /4 2-3/4 2-3/ /2 3-1/2 4-1/2 4-1/2 FLANGE OD OD 6 7-1/ / / /2 32 BOLT CIRCLE BC 4-3/ /2 9-1/2 11-3/4 14-1/ /4 21-1/4 22-3/ /2 FLANGE RAISED FACE RF 3-5/ /16 8-1/2 10-5/8 12-3/ /4 18-1/ /4 INSIDE DIAMETER ID /4 15-1/4 17-1/4 19-1/4 23-1/4 NO. OF BOLT HOLES N HOLE D&T SIZE d 5/8"-11 5/8"-11 5/8"-11 3/4"-10 3/4"-10 7/8"-9 7/8"-9 1"-8 1"-8 1-1/8"-7 1-1/8"-7 1-1/4"-7 C/L TO TOP-CLOSED H-CLS 16-7/8 17-5/ / / / / / /8 C/L TO TOP-OPEN H-OPN 19-1/8 20-5/8 23-1/2 29-1/2 35-3/4 42-5/ / / / /4 75-5/8 85-5/8 HANDWHEEL DIA. H/W WEIGHT - LB'S WT STROKE S 2-1/4 3-5/16 4-5/16 6-5/16 8-5/ / / /8 15-9/ /4 19-5/8 22-3/4
7 Series SS Knife Gate Valves MATERIALS OF CONSTRUCTION MODEL SS 1 GATE SS 2 BODY SS 3 SEAT SS 4 BOLTS SS 5 PACKING TLSP* 6 GLAND SS 7 STEM SS 8 YOKE SS 9 STEM NUT BRONZE 10 HANDWHEEL DI *TLSP = TFE Lubricated Synthetic Packing Stocked in 304 and 316 SS. 317 SS Available. Normally supplied with handwheel for manual operation, but can be modified for chainwheel, bevel gear, fail safe spring cylinder, electric motor, hydraulic or pneumatic cylinder operator. DIMENSIONS (INCHES) AND WEIGHTS SIZE FACE-TO-FACE F-F 1-7/ /4 2-3/4 2-3/ /2 3-1/2 4-1/2 4-1/2 FLANGE OD OD 6 7-1/ / / /2 32 BOLT CIRCLE BC 4-3/ /2 9-1/2 11-3/4 14-1/ /4 21-1/4 22-3/ /2 FLANGE RAISED FACE RF 3-5/ /16 8-1/2 10-5/8 12-3/ /4 18-1/ /4 INSIDE DIAMETER ID /4 15-1/4 17-1/4 19-1/4 23-1/4 NO. OF BOLT HOLES N HOLE D&T SIZE d 5/8"-11 5/8"-11 5/8"-11 3/4"-10 3/4"-10 7/8"-9 7/8"-9 1"-8 1"-8 1-1/8"-7 1-1/8"-7 1-1/4"-7 C/L TO TOP-CLOSED H-CLS 14-5/8 15-1/ / / / /4 31-9/ /4 43-1/8 46-3/8 50-1/ /16 C/L TO TOP-OPEN H-OPN 17-1/8 18-9/ / / / /4 44-1/ /4 58-7/8 64-3/8 69-3/4 79-7/8 HANDWHEEL DIA. H/W WEIGHT - LB'S WT STROKE S 2-1/2 3-1/2 4-1/2 6-1/2 8-1/2 10-1/2 12-1/2 13-7/ /8 24-3/16
8 Series 150 Knife Gate Valves
9 Series 120 Butterfly Valves Tapered pins with Towniprene caps Neoprene lined lens style disk Towniprene lined seal One piece shaft Packing flange Packing gland & upper seal and bushing Towniprene full face integral gasket Fabricated body Lower seal & bushing
10 Series TM-3 & TM-4 Butterfly Valves
11 072616
12 Mail: P.O. Box 221 Candler, FL SE 110th St. Rd. Phone: (800) Fax: (352)
Fabri-Valve. CF33/CF133 Ported Slide Gate Valve
Fabri-Valve CF33/CF133 Ported Slide Gate Valve CF33/CF133 Ported Slide Gate Valve Fabri-Valve Figures C33 / C133 / F33 / F133 are bi-directional soft seated, slide gate valves designed for on/off service
More informationFabricated Bevel Gear Operator Bi-Directional Metal Seat 150 PSI Bi-Directional Resilient Seat 150 PSI
Knife Gate Valves Uni-Directional (Metal Seated) Manual Handwheel Style KGV...2 Carbon Steel Technical Data 150 PSI 2 24...3 304 Stainless Steel Technical Data 150 PSI 2 24...3 316 Stainless Steel Technical
More informationCustom Fabricated and Cast Knife Gate Valves
Custom Fabricated and Cast Knife Gate Valves Engineering Creative Solutions for Fluid Systems Since 1901 675 Mitchell Avenue Woodland, WA 98674 phone: 360.225.1230 888.256.5779 fax: 360.225.1235 www.henrypratt.com
More informationFabri-Valve. C67 Bi-Directional Knife Gate Valve
Fabri-Valve C67 Bi-Directional Knife Gate Valve C67 Bi-Directional Knife Gate Valve The Fabri-Valve Figure C67 features a unique, patented*, perimeter seal that provides bi-directional shutoff. The seal
More informationFABRICAST VALVE. Knife Gate Valves & Custom Fabrication Toll Free: Fax:
FABRICAST VALVE Knife Gate Valves & Custom Fabrication 360-425-0306 Toll Free: 1-877-264-2503 Fax: 360-425-0353 1061 Industrial Way Longview, WA 98632 FIG 40 The Fabricast FIG 40 is a metal seated, uni-directional
More informationFabri-Valve Push Through Slurry Valve SV1. Engineered Valves
Fabri-Valve Push Through Slurry Valve SV1 Engineered Valves Fabri-Valve SV1 - Push Through Slurry Valve The Fabri-Valve SV1 Push-Through Slurry Valve is one of the most versatile knife gate valve configurations
More informationV A L V E S. rice List of. Controlling fluids is our expertise TERMS & CONDITIONS : An ISO:9001 Co. PRICE LIST NO. : JMW / 3 0 W.E.
V A L V E S Controlling fluids is our expertise TERMS & CONDITIONS : This cancels our all previous issues. All prices are Ex. works, Jalandhar. Excise duty will be charged extra as applicable (presently
More informationKNIFE GATE VALVE Product Ref. : KG02W/KG02L
General Description Model KG02 is a bidirectional knife gate valve suitable for most industrial application cases. With one piece body design, it combines robust and economy giving best cost effective
More informationCast-Iron Valves G101 DI BUTTERFLY VALVE LEVER... 2 G401 CI GLOBE VALVE CL G403 CI GLOBE VALVE PN G103 DI BUTTERFLY VALVE GEAR...
Cast-Iron Valves PAGE G101 DI BUTTERFLY VALVE LEVER.... 2 PAGE G401 CI GLOBE VALVE CL125.... 9 G103 DI BUTTERFLY VALVE GEAR.... 3 G403 CI GLOBE VALVE PN16.... 10 G201 CI Y STRAINER CL125.... 4 G501 CI
More informationDiaphragm Valves. Product information
Diaphragm Valves Product information ART 510 Diaphragm Valve Weir Type Features Screwed BSP Taper Ductile Iron Body Rising Handwheel Indicator Bonnet Diaphragm Available Grade A - Natural Rubber Grade
More informationIndex. Butterfly Valves
Dry Bulk - Chemical - Petroleum Dry Bulk - Chemical - Petroleum Nozzles Nozzles & Valves & Index Index Part No. Description Page Nozzles P- 202 Overwing Aircraft Refueling, Bronze 1 P- 2022 Overwing Aircraft
More informationLATEST ARRIVALS CATALOGUE STOCK
LATEST ARRIVALS CATALOGUE STOCK PIPES VALVES FLANGES & FITTINGS IN CARBON STEEL STAINLESS STEEL LATEST ARRIVALS!!!!!! VALVE PRODUCTS CAST IRON WAFER TYPE BUTTERFLY VALVE, PINLESS SHAFT, DUCTILE NICKEL
More informationFabri-Valve. CF37 Heavy Duty Knife Gate Valve
Fabri-Valve CF37 Heavy Duty Knife Gate Valve CF37 Heavy Duty Knife Gate Valve Fabri-Valve Figures C37 and F37 are some of the most popular knife gate valve configurations. Figure C37 knife gate valves
More informationButterfly Valves. watts.com
Butterfly Valves watts.com Durafil is a registered trademark of Cargill, Limited. Teflon is a registered trademark of the E.I. Dupont de Nemours & Company, Incorporated. Uniseal is a registered trademark
More informationflowit by Fig. FTBGW-20 Bronze Gate Valve, Non-Rising Stem BS 5154 PN20 Material Specifications Dimensions (mm)
flowit flowit by Bronze Gate Valve, Non-Rising Stem BS 5154 PN20 Fig. FTBGW-20 Designed to BS 5154 Pressure Rating: PN20 Threaded Bonnet End connection: BS21 Taper Threaded (ISO 7) / BS EN10226-2 Shell
More informationShearseal Knife Gate Valves. Manufactured by TSE
Shearseal Knife Gate Valves Manufactured by TSE Shearseal Design Most knife gate valve manufacturers describe their valve as rugged and dependable. In the Shearseal Valve, these qualities are not idle
More informationKENNEDY VALVE KS-RW RESILIENT WEDGE VALVES
KENNEDY VALVE KS-RW RESILIENT WEDGE VALVES KENNEDY VALVE AWWA C515 Resilient Wedge Gate Valves Meet or Exceed the Requirements of AWWA Standard C515 UL-262/FM-1120/1130 ULC-Underwriters of Canada 2 1/2
More informationButterfly Valves. Jenkins Valves 254 Henry Street Brantford, Ontario N3T 5T7 Tel: Tel: Fax:
Butterfly Valves Jenkins Valves 254 Henry Street Brantford, Ontario N3T 5T7 Tel: 519-759-3911 Tel: 800-563-6302 Fax: 519-759-7970 www.craneenergy.com A Crane Co. Company Butterfly Valves Ordering Information
More informationISO RESILIENT WEDGE GATE VALVE. Engineering Creative Solutions for Fluid Systems Since 1901
ISO RESILIENT WEDGE GATE VALVE Engineering Creative Solutions for Fluid Systems Since 1901 TABLE OF CONTENTS ISO RESILIENT WEDGE GATE VALVE Scope of Line...1 Features and Benefits...1 Suggested Specification...2
More informationRESILIENT SEATED BUTTERFLY VALVES. Howell Valve & Automation. Toll Free: Howellvalve.com
RESILIENT SEATED BUTTERFLY VALVES Howell Valve & Automation Toll Free: 1-888-469-3557 Howellvalve.com TABLE OF CONTENTS Description Page Index 2 Resilient Standard Features 3 ST Boot Series with BUNA-N
More informationBI-DIRECTIONAL KNIFE GATE VALVE
Wastewater treatment plants Food and Beverage Chemical plants Sizes: Working pressure: DN 2"/ 50mm to DN 10"/ 250mm DN 12"/300mm to DN 16"/ 400mm DN 18"/450mm DN 20"/500mm to DN 24"/ 600mm DN 28"/700mm
More informationIndustrial Bronze and Iron Price List
Industrial Bronze and Iron Price List TABLE OF CONTENTS IND-0217 Effective: February 1, 2017 Revised: 12/07/17 Suggested list prices are subject to change without notification. Visit our Website for the
More informationvisit us online at
PRICE SHEET (PL-1014-VLV Replaces PL-0513-VLV) TABLE OF CONTENTS VALVES & HYDRANTS Page(s) Product Line Price Sheet 1 AWWA C515 Gate Valves NRS Series 2010 & 1010 PL-1014 Multiplier 2 AWWA C515 Gate Valves
More informationIndustrial Bronze and Iron Price List
Industrial Bronze and Iron Price List TABLE OF CONTENTS IND-0718 Effective: July 2, 2018 Revised: 08/06/2018 Suggested list prices are subject to change without notification. Visit our Website for the
More informationIndustrial Bronze and Iron Price List
Industrial Bronze and Iron Price List IND-0318 Effective: March 1, 2018 Revised: 08/06/2018 Suggested list prices are subject to change without notification. Visit our Website for the most up-to-date product
More informationIndustrial Bronze and Iron Price List
Industrial Bronze and Iron Price List IND-0718 Effective: July 2, 2018 Revised: 09/24/2018 Suggested list prices are subject to change without notification. Visit our Website for the most up-to-date product
More informationScotch Yoke Actuators 2016 EDITION. Heavy Duty Pneumatic Actuators SHD and CHD series. The Best Way To Automate Your Process.
The Best Way To Automate Your Process Heavy Duty Pneumatic Actuators SHD and CHD series Scotch Yoke Actuators 2016 EDITION Max-Air Technology, Inc. 751 Hoff Rd O Fallon, Missouri 63366 Tel: +1.636.272.4934
More informationVALVE AND HYDRANT PRICE BOOK
VALVE AND HYDRANT PRICE BOOK HTTP://WWW.CLOWVALVE.COM EFFECTIVE DATE February 10, 2012 CLOW VALVE COMPANY 902 SOUTH SECOND ST. OSKALOOSA, IA 52577 PH# 800-829-2569 FAX# 641-673-8269 CLOW VALVE COMPANY
More informationINSERTA VALVE SLEEVE INSERTA VALVE ASSEMBLY. Valve insertion, simplified MATERIAL SPECIFICATIONS MATERIAL SPECIFICATIONS.
MADE IN U.S.A. Valve insertion, simplified 10-12 installations in cast iron, ductile iron, A/C, PVC C-900 and steel pipe No Loss of Pressure Minimal Water Loss Completion time is less than 2 hours Much
More informationBI-DIRECTIONAL KNIFE GATE VALVE
BI-DIRECTIONAL KNIFE GATE VALVE The model knife gate is a bi-directional valve designed for general industrial service applications. The design of the body and seat assures non-clogging shut off on suspended
More informationPowerGrip Timing Belt Drives
PowerGrip Timing Belt Drives Single Sided Belt Drive Systems PowerGrip Timing Belt drives operate on the tooth-grip principle, with the molded teeth the belt designed to make positive engagement with the
More informationRUBBER SLEEVE KNIFE GATE VALVE
RUBBER SLEEVE KNIFE GATE VALVE The model knife gate is a wafer valve designed for a wide range of industrial applications. The double-seated design provides bi-directional shut off. The design of the valve
More informationRESILIENT SEATED BUTTERFLY VALVES
DESIGN FEATURES APPLICATIONS: HVAC Chemical/Petrochemical Processing Food and Beverage Industry Power and Utilities Pulp and Paper Industry Stem Configuration: Gives positive attachment for handles or
More informationOther Information. Section 6. Contained in this section: Actuator Diaphragm Identification. How To Order. Facts and Recommended Guidelines
Section 6 Other Information Contained in this section: How To Order Maintenance Instructions Flange Gasket and Storage Recommendations Actuator Diaphragm Identification Facts and Recommended Guidelines
More informationAWWA C515 REDUCED WALL DUCTILE IRON
30" - 54" R/W VALVES AWWA C515 Resilient Wedge Gate Valves Meet or Exceed the Requirements of AWWA Standard C515 Water Working Bubble Tight Hydrostatic Shell Size Range Pressure psi Test psi Test psi AWWA
More informationSuction Diffusers. Applications PROTECTION PUMP. Pressures to 790 PSIG Temperatures to 800ºF FEATURES MATERIALS END CONNECTIONS SIZE RANGES RATINGS
Applications Process Industry Metals and Mining Power Industry Water and Waste Chemical Industry Pulp and Paper Oil and Gas Suction Diffusers Pressures to 790 PSIG Temperatures to 800ºF FEATURES Filtration
More informationPDC Elastomer Lined Series 27 Butterfly Valve 2" thru 36" for 125/150 lb. Flanging
PDC Elastomer Lined Series 27 Butterfly Valve 2" thru 36" for 125/150 lb. Flanging General Description: The PDC "Elastomer Lined" series butterfly valves are available in both full lug and wafer styles.
More informationRUBBER SLEEVE KNIFE GATE VALVE
RUBBER SLEEVE KNIFE GATE VALVE The model knife gate is a bi-directional wafer valve equipped with two metallic coved rubber sleeves designed for use in the handling of abrasive slurries, mainly in industries
More informationAHEAD OF THE FLOW. Butterfly Valves
CATALOG C-BFV-1201 TM AHEAD OF THE FLOW Butterfly Valves General Index Butterfly Valves WARRANTY..........................................4 BUTTERFLY VALVES..................................5-27 OPTIONS
More informationRUBBER SLEEVE KNIFE GATE VALVE
RUBBER SLEEVE KNIFE GATE VALVE The model knife gate is a bi-directional wafer valve equipped with two metallic coved rubber sleeves designed for use in the handling of abrasive slurries, mainly in industries
More informationSealing Test Pressure (MPa)
TRIPLE ECCENTRIC BUTTERFLY VALVE Triple Eccentric Butterfly Valve provides a tight shut-off. This geometry ensures that the disc seal contacts the body seat only at the final shut-off position without
More informationCAST BODY WEDGE GATE VALVES
CAST BODY WEDGE GATE VAVES FIG. 20-150, STAINESS STEE - CASS 150 D e s i g n F e a t u r e s ocking handwheel nut. Provision for lockout lanyard. TFE impregnated packing for temperature to 450 o F/232
More informationALC-3 BUTTERFLY VALVES NOMINAL PRESSURE NOMINAL SIZE MATERIALS CONNECTIONS DESIGN. ANSI Class PN DN
BUTTERFLY VALVES ALC-3 NOMINAL PRESSURE ANSI Class 150-600 PN 10-100 NOMINAL 2-80 DN 50-2000 MATERIALS Cast Iron Carbon Steel Low Alloy Steel CONNECTIONS Wafer Lugged Flanged Butt Weld DESIGN Eccentric
More informationSQUARE PORT KNIFE GATE VALVE
SQUARE PORT KNIFE GATE VALVE The model knife gate is a square port low-pressure valve for highly solid loaded fluids or solids, mainly used in bulk handling and silo outlet applications in industries such
More informationKnife gate valve HG - Standard
Knife gate valve HG - Standard V R Data is only for informational purpose. All specifications are subject to change without notice. 1 Knife gate valve HG Stafsjö s knife gate valve HG has excellent flow
More informationWey Knife Gate Valve Options & Accessories
Wey Knife Gate Valve Options & Accessories Wey Valve offers a large variety of actuation, controls and accessories along with it s high performance knife gate valves. Due to servicing a wide range of industries
More informationCast Iron Valves. Product Information. It s all at Albion
Cast Iron Valves Product Information It s all at Albion ART 77-78 Cast Iron Ball Valve Flanged Ends Flange Mounting PN16 Only ISO 5211 Direct Mount (Not 200mm) Art 77/78 Plated Brass/Stainless Ball BS
More informationRUBBER SLEEVE KNIFE GATE VALVE
RUBBER SLEEVE KNIFE GATE VALVE The model knife gate is a bi-directional full flanged valve equipped with two metal reinforced rubber sleeves designed for use in the handling of abrasive slurries, mainly
More informationHattersley Newman Hender Ltd
Product Guide Quality Valves from Hattersley WHEN IT REALLY COUNTS, YOU CAN DEPEND ON HATTERSLEY Hattersley Newman Hender is one of the world s premier manufacturers of cast iron, ductile iron and copper
More informationDUCTILE IRON & STAINLESS STEEL. FOR WATER & WASTEWATER Treatment Plants
DUCTILE IRON & STAINLESS STEEL FOR WATER & WASTEWATER Treatment Plants About Trumbull Mud Valves Trumbull Industries was established in 1922 in Warren, Ohio (Trumbull County). Manufacturing began in the
More informationRUBBER SLEEVE KNIFE GATE VALVE
RUBBER SLEEVE KNIFE GATE VALVE The model knife gate is a bi-directional full flanged valve equipped with two metal reinforced rubber sleeves designed for use in the handling of abrasive slurries, mainly
More informationStafsjö Valves AB. SE Stavsjö, Sweden. Tel: +46 (0) Fax: +46 (0) A Bröer Group company
Product: W W Stafsjö s knife gate valve W is a bi-directional valve with full bore. It is made to handle different liquids, especially in water, waste water and biogas plants. The W valve is designed of
More informationPRICE SHEET TABLE OF CONTENTS AWWA VALVES & HYDRANTS. (PL-0418-AWWA Replaces PL-1014-VLV)
Page(s) 1 2 3 3 4 4 5 5 6 PRICE SHEET TABLE OF CONTENTS VALVES & HYDRANTS ( Replaces PL-1014-VLV) Product Line C515 NRS Gate Valves Series 1010 UL/FM C515 NRS Gate Valves Series 2010 C508 Swing Check Valves
More informationSERIES GVI AWWA C509/C515 RESILIENT SEATED GATE VALVES 2-48
SERIES GVI AWWA C509/C515 RESILIENT SEATED GATE VALVES 2-48 509-110 R6 OCT 2018 REPLACEABLE 0-RINGS Triple O-ring sealed with upper two O-rings replaceable with the valve fully open and subjected to the
More informationInsertaValve Sleeve. InsertaValve Valve Assembly. Valve Insertion, simplified. Material Specifications. Transmate InsertaValve
Material Specifications Material Specifications Sleeve 10" - 12" installations in cast iron, ductile iron, A/C, PVC C-900 and steel pipe No Loss of Pressure Minimal Water Loss Completion time is less than
More informationL15 HEAVY DUTY KNIFE GATE VALVE STANDARD PARTS LIST
L15 HEAVY DUTY KNIFE GATE VALVE The L15 model knife gate is a uni-directional lug type valve designed according to MSS-SP-81 and TAPPI TIS 405-8 for industrial service applications. The design of the body
More informationSCOTCH YOKE ACTUATORS
TITOLO TITOLO SCOTCH YOKE ACTUATORS Heavy duty pneumatic actuators SHD and CHD series ATEX GOST -R Quality system: ISO 9000 Max-Air Technology, Inc. 751 Hoff Rd O Fallon, Missouri 63366 Toll Free: 888.842.9998
More informationRed Valve. The World Leader In Pinch Valve Technology MANUAL PINCH VALVES
Red Valve The World Leader In Pinch Valve Technology MANUAL PINCH VALVES Manual Red Valve Pinch Valves Same Face-to-Face As Gate, Plug, Or Ball Valves To 12" 100% Full Port Bi-Directional Droptight Shutoff
More informationVELAN COMPANY PROFILE
Catalogs VELAN COMPANY PROFILE Velan is one of the world's leading manufacturers of industrial valves, supplying forged and cast steel gate, globe, check, ball, butterfly, knife gate and engineered severe
More informationAWWA C515 REDUCED WALL DUCTILE IRON
30" - 54" R/W VALVES AWWA C515 Resilient Wedge Gate Valves Meet or Exceed the Requirements of AWWA Standard C515 Water Working Bubble Tight Hydrostatic Shell Size Range Pressure psi Test psi Test psi AWWA
More informationKnife gate valve SLF. Data is only for informational purpose. All specifications are subject to change without notice issue 3
Knife gate valve SLF Data is only for informational purpose. All specifications are subject to change without notice. V R 1 2013-02-15 issue 3 Knife gate valve SLF Stafsjö s knife gate valve SLF is a flanged
More informationHOPPER SHAPE KNIFE GATE VALVE
HOPPER SHAPE KNIFE GATE VALVE The C model knife gate is a uni-directional wafer valve designed for industrial bulk handling service applications (powdered and granular products). makes it ideal for use
More information516509_tabs 11/16/10 4:55 AM Page 1 FIRE HYDRANTS
Date Printed: November 2010 FIRE HYDRANTS or Tyton (6"),6, or 8" A EDDY FIRE HYDRANTS PARTS LIST WORKING PRESSURE: 150 PSI Note: Discontinued For Reference Only 350 PSI Working Pressure
More informationUNIVERSITY SERVICES ANNEX James Madison University Harrisonburg, Virginia State Project Code: Architect s Project Number:
SECTION 230523 GENERAL DUTY VALVES FOR HVAC PIPING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Provisions of the Contract and of the Contract Documents apply to this Section. 1.2 DEFINITIONS A. The following
More informationBUTTERFLY VALVE VF-7 Series
BUTTERFLY VALVE VF-7 Series CENTRIC, RUBBER SEATED LEVER GEAR PNEUMATIC - ELECTRIC OPERATED ALLOWABLE PRESSURE DN 40 300mm : 16 bar DN 350 1200mm : 10 bar INVESTMENT CASTING STAINLESS STEEL BODY 2 12 (50mm
More informationBS 1452 Gr Gr. 420/ Gr. 420/ AB2 304 C C S S S S16. E mm
WAFER TYPE BUTTERFY VAVE SPECIFICATION FOR BS EN 1092-2 PN10 / PN16 FANGE MOUNTING FACE-TO-FACE DIMENSION TO ISO 5752 / BS 5155 / BS EN 593 EVER / WORM GEAR OPERATOR PRESSURE / TEMPERATURE RATINGS BFV-WB
More informationTechnical changes kept in reserve WAFER STYLE KNIFE GATE VALVE. DN 50 to DN 250: 10 kg/cm² DN 300 to DN 400: 6 kg/cm²
WAFER STYLE KNIFE GATE VALVE The A model knife gate is an uni-directional wafer valve designed for general industrial service applications. The design of the body and seat assures non-clogging shut off
More informationLARGE DIAMETER VALVES
Butterfly Valves TABLE OF CONTENTS E00-STI STANDARD VALVES The 400/500 have been specifically designed for heavy duty on-off throttling from 2-4 in diameter. Completely weather proof and rugged design
More informationSeries 800 AWWA Butterfly Valves
Series 800 AWWA Butterfly Valves Valve and Gate Group A Century of Experience GA valves are known for long term reliability in the most demanding water and wastewater applications. Whether a simple check
More informationIndustrial Bronze and Iron Price List
Industrial Bronze and Iron Price List TABLE OF CONTENTS IBI-1017 Effective: October 2, 2017 Revised: 12/07/2017 Suggested list prices are subject to change without notification. Visit our Website for the
More informationPNEUMATIC ON OFF GLOBE VALVE
PNEUMATIC ON OFF GLOBE VALVE Model No. AGE0 SERIES s Bonnet -way globe valve, -way globe valve 1A(1/") ~ 00A(1") JIS 10K~K, ANSI 10#~900#, PN10~, etc. FF, RF, BW, SW Plain bonnet: -17 ~0 Extended bonnet:
More informationResilient Seated Butterfly Valves
Resilient Seated Butterfly Valves Crane has been a market leader in quarter-turn valves for more than 40 years, and we have earned a reputation as a supplier of superior valves at competitive prices. Our
More informationSECTION GENERAL-DUTY VALVES FOR PLUMBING PIPING
SECTION 220523 - GENERAL-DUTY VALVES FOR PLUMBING PIPING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division
More informationSECTION GENERAL-DUTY VALVES FOR PLUMBING PIPING
PART 1 - GENERAL 1.1 DESCRIPTION OF WORK A. Provide labor, materials, equipment, and services necessary to install valves required to complete the work indicated on drawings. B. ASME Compliance: 1. ASME
More informationWAFER STYLE KNIFE GATE VALVE
MODEL WAFER STYLE KNIFE GATE VALVE The model knife gate is an uni-directional wafer valve designed for general industrial service applications. The design of the body and seat assures non-clogging shut
More informationFabri-Valve XS150. Knife Gate Valve
Fabri-Valve XS150 Knife Gate Valve XS150 XS150 High Performance Knife Gate Valve The Fabri-Valve XS150 High Performance Knife Gate valve features a robust perimeter seal that provides bi-directional bubble
More informationBIDIRECTIONAL WAFER Knife Gate Valve
05/10/2012 BIDIRECTIONAL WAFER Knife Gate Valve Bidirectional wafer design knife gate valve. Monoblock one piece cast iron body. Stainless steel gate. Two rubber sleeves. Provides high flow rates with
More informationIntroduction. Resilient Seat Butterfly Valves. Valves D-207.
Introduction Resilient Seat Butterfly D-207 Resilient Seat Butterfly are now available in sizes up to 20-inches. Excellent for isolation applications, two-way and floating Butterfly provide 2-position
More informationKBF100. General Service Butterfly Valve KBF. Hot to Order System KOPECS CO.,LTD. EASBL TEL : FAX :
KBF100 General Service Butterfly Valve KOPECS Butterfly Valve Features KOPECS unique seat sealing esign offers frictional contact between valve disc and seat: ㆍ ㆍ Zero leakage,tight shut off ㆍ Lower torque
More informationBUTTERFLY VALVES KENNEDY 140 YEARS AWWA C504 CLASS 150B & 250B CERTIFICATIONS ISO 9001 ISO BS OHSAS
KENNEDY BUTTERFLY S CERTIFICATIONS ISO 9001 ISO 14001 BS OHSAS 18001 AWWA C504 CLASS 150B & 250B STYLE 4500 3-24 STYLE 1450 30-54 CONSULT KENNEDY FOR SIZES LARGER THAN 54 INCHES. 140 YEARS WWW.KENNEDY.COM
More informationTechnical changes kept in reserve THROUGH CONDUIT KNIFE GATE VALVE
Technical changes kept in reserve THROUGH CONDUIT KNIFE GATE VALVE The B model knife gate is a bi-directional wafer valve designed for media with high consistency. The double seat design assures a non-clogging
More informationUNI-DIRECTIONAL KNIFE GATE VALVE
UNI-DIRECTIONAL KNIFE GATE VALVE The MU-CYL model knife gate is a Uni-directional valve, equipped with automatic or manual driver, that by its loose elastomeric clamping ring design (tight version) ensures
More informationCV-SFS4-PN16 SERIES SLIENT CHECK VALVE, GLOBE TYPE FEATURES SPECIFICATIONS PRODUCT IDENTIFICATION SYSTEM PRODUCT DATA
CV-SFS4-PN16 SERIES SLIENT CHECK VALVE, GLOBE TYPE Silent check function Temperature -10 ~ +120 PRODUCT IDENTIFICATION SYSTEM 2 Disc Ductile iron GGG 40 3 Spring Stainless steel SUS304 4 Bush Bronze 1400
More informationMaterials : Cast iron or Stainless steel
Certificate 3.1 Size : Ends : Min Temperature : Max Temperature : DN 50 to DN 800 Between flanges PN10-10 C for NBR seat ( -15 C for EPDM ) + 90 C for NBR seat ( + 110 C for EPDM ) Max Pressure : 10 Bars
More informationPRICE LIST OW Effective July 1, 2008 Current Revision - I Supercedes OW-0107 Date 6/30/08
PRICE LIST OW-0708 Effective July 1, 2008 Current Revision - I Supercedes OW-0107 Date 6/30/08 MANUFACTURING P.O. Box 400 Wauconda, Illinois 60084 phone: 847-526-2166 or 800-323-1659 fax: 847-526-2241
More informationTUF-SKIN VALVES. Universal sales 1~1~2O15. Catalog ~ Price List. UNIVERSAL SALES Booth Street Junction City, OR
Universal sales TUF-SKIN VALVES Catalog ~ Price List 1~1~2O15 MEMBER MANA Manufacturers Agents National Association UNIVERSAL SALES 92311 Booth Street Junction City, OR 97448 www.universalsales.biz Ph:
More informationBUTTERFLY VALVE 17 SERIES Gearbox
DN H1 H2 H3 BUTTERFLY VALVE 17 SERIES Gearbox FIGURE: 17234ER: 17234BR: 17234VR: Seat in EPDM, with gearbox Seat in Buna, with gearbox Seat in Viton, with gearbox B ØR L DIMENSIONS: (mm) DN L B XR H1 H2
More informationUNITED BRASS WORKS, INC. 714 S. Main St., Randleman, NC Tel: Fax:
Model 44SS Whistle Valve Quick-Opening Self-Closing Globe Valve With Yoke & Lever Built-In Strainer Screen 150WSP 400 WOG 1 O-Ring FKM (Viton) 2 Lever Bronze 3 Stem Stainless Steel 4 Clevis Pin Steel 5
More informationButterfly Valve. Product Training Presentation Danfoss Flomatic Corporation
Click to see: Butterfly Valves in our Online Catalog Butterfly Valve Product Training Presentation Danfoss Flomatic Corporation REV:082303 Butterfly Valve SYLAX SERIES 149G BUTTERFLY VALVES Wafer and Lug
More informationTHROUGH CONDUIT KNIFE GATE VALVE. OBX 09/11 2nd EDITION Revision 1 Reserves the right to change specifications without notice
THROUGH CONDUIT KNIFE GATE VALVE The model knife gate is a bi-directional wafer valve designed for media with high consistency. The double seat design assures a non-clogging shut off on either normal or
More informationHEAVY DUTY KNIFE GATE VALVE. ANSI B16.5 (class 150) and DIN PN 10
HEAVY DUTY KNIFE GATE VALVE The SERIES knife gate is a uni-directional lug type valve designed according to the MSS-SP-1 and TAPPI TIS 405- standard for industrial service applications. The design of the
More informationLead-free valves for potable water systems. Rev 02/17
Lead-free valves for potable water systems. Rev 02/17 UltraPure for purer water. The new standard. Senate law S.3874 was passed January 4, 2011 and is effective January 4, 2014. The law regulates lead
More informationWAFER STYLE KNIFE GATE VALVE
WAFER STYLE KNIFE GATE VALVE The model knife gate is an uni-directional wafer valve designed for general industrial service applications. The design of the body and seat assures non-clogging shut off on
More information15100 VALVES. E. Section Building Automation and Control System Guidelines
15100 VALVES PART 1: GENERAL 1.01 RELATED SECTIONS A. Section 15050 Basic Material and Methods B. Section 15545 Chilled Water System C. Section 15550 Heat Generation D. Section 15790 Coils E. Section 15955
More informationFasani Pressure Seal Cast Gate Valves - Style A Wedge Gate and Parallel Slide
A series of robust gate valves specifically designed for applications in the power industry Features General application Our pressure seal -Style A gate valves are recommended for several applications
More informationBulletin C Dean Pump Division. Heavy Duty, High Temperature Process Pumps. R4140 Telescoping Guard. R4140 C-Face Motor Support
Bulletin C 1.4.43 Dean Pump Division Heavy Duty, High Temperature Process Pumps R4140 Telescoping Guard R4140 C-Face Motor Support Dean Pump Series R Centrifugal Process Pumps Capacities to 5000 GPM (1135
More informationSECTION VALVES
PART 1 GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions Specification Sections, apply to this Section. B. Related Sections:
More informationSLV EN 1092 PN 10 ANSI B16.5 Class 150 AS 2129 Table D AS 2129 Table E
SLV EN 2 PN ANSI.5 Class 0 AS 2 Table D AS 2 Table E Stafsjö s knife gate valve SLV is bi-directional and designed for the most demanding slurry and abrasive applications. It is a full bore valve with
More informationKVC VALVES AND PEX FITTINGS
KVC VALVES AND PEX FITTINGS 2011 KVC VALVES & PEX FITTINGS CATALOGUE 2 P a g e Table of contents 1. Cast Steel Valves..4 FIG. 272-CS-15 ( Gate ).....5 FIG. 272-CS-300 ( Gate )......6 FIG. 272-CS-600 (
More informationSeries PV30. Split-Body Pinch Valve. CLA-VAL Copyright Cla-Val 2007 Printed in USA Specifications subject to change without notice.
OPERTION The la-val Series PV30 Pinch Valves provide a positive means to control flow of hard to handle, aggressive media such as slurries, sludges and dry solids.the standard, pure gum elastomer sleeve,
More information