HEAVY DUTY CABLE LADDER

Transcription

1 Headquaters: NIEDAX GmbH & Co. KG Asbacher Straße 141 D Linz/Germany Tel: ax: export@niedax.de HEAVY DUTY CALE LADDER 2009

2 Cable Ladder rung spacing 250 delivery length KLU KLU KLU KLU KLU KLU KLU KLU KLU KLU m The splice plates V 100 have to be ordered seperately x 3 m x 3 m x 3 m x 3 m x 3 m x 3 m x 3 m x 3 m x 3 m x 3 m Load Chart: q = uniformly distributed load (tested according to DIN EN IEC standard) Uniformly distributed load q Specified load ratings are independant Support of splice Span plate (m) location. Horizontal Elbow 45 KLU KLU KLU KLU KLU KLU KLU KLU KLU KLU The splice plates V 100 have to be ordered seperately Horizontal Elbow 90 KLU KLU KLU KLU KLU KLU KLU KLU KLU KLU The splice plates V 100 have to be ordered seperately. 1

3 HEAVY DUTY CALE LADDER Horizontal Tee KLUT KLUT KLUT KLUT KLUT KLUT KLUT KLUT KLUT KLUT The splice plates V 100 have to be ordered seperately. Vertical Outside Elbow 45 KLUS KLUS KLUS KLUS KLUS KLUS KLUS KLUS KLUS KLUS The splice plates V 100 have to be ordered seperately. Vertical Outside Elbow 90 KLUSD KLUSD KLUSD KLUSD KLUSD KLUSD KLUSD KLUSD KLUSD KLUSD The splice plates V 100 have to be ordered seperately Vertical Inside Elbow 45 KLU KLU KLU KLU KLU KLU KLU KLU KLU KLU The splice plates V 100 have to be ordered seperately

4 Vertical Inside Elbow 90 KLUD KLUD KLUD KLUD KLUD KLUD KLUD KLUD KLUD KLUD The splice plates V 100 have to be ordered seperately Reducer, small KLURS KLURS KLURS KLURS ,5 45,5 51,5 65,5 The splice plates V 100 have to be ordered seperately. Reducer right 1 KLURR10.60/ KLURR10.60/ KLURR10.90/ KLURR10.90/ KLURR10.90/ Reducer left 1 KLURL10.60/ KLURL10.60/ KLURL10.90/ KLURL10.90/ KLURL10.90/ Straight Splice Plate thickness (t) V LM 10x ,5 10 St. 3

5 SUPPORT SYSTEM Overhead Hanger I 80 Profile Total length L HI 80/ HI 80/ HI 80/ HI 80/ HI 80/ HI 80/ HI 80/ HI 80/ HI 80/ HI 80/ HI 80/ HI 80/ HI 80/ HI 80/ HI 80/ HI 80/ HI 80/ HI 80/ HI 80/ Thickness of headplate is included in total length indicated. Please be aware of restrictions for trays and ladders when brackets are mounted on overhead hangers of 200 length only. To be used for: KTT, KTTS type brackets or static reasons brackets have to be installed at least 50 above hangers end. This will also guarantee an easy mounting of the protective end cap. The permissible load shown is valid only for proper anchorage to the building structure. Please consult structural engineering for details and local regulations. Load Chart: Deflection of Overhead Hanger (onesided load) Deflection in There is no noticeable deflection of the Total hanger Load for balanced in N (twosided) loading. Protective Cap K03 SKI 80 color yellow St. silicone-free PVC for covering the ends of profiles To prevent accidents and injuries you must install protective end caps. To be used for: profile I 80/... and overhead hanger HI 80/... and vertical cable ladder STIC... and STIW... rackets have to be installed at least 50 above hangers end to allow an easy mounting of the protective end cap. 4

6 racket medium-duty with preinstalled clamp length (A) admissible load at L/2 KTT ,5 2 LM 6x12 KTT ,5 2 LM 6x12 KTT ,5 2 LM 6x12 KTT ,5 2 LM 6x12 KTT ,5 2 LM 6x12 KTT ,5 2 LM 6x12 KTT ,5 2 LM 6x12 KTT ,5 2 LM 6x12 KTT ,5 2 LM 6x12 KTT ,5 2 LM 6x12 KTT ,5 2 LM 6x12 kn To be used for: profile I 80/... as well as overhead hanger HI 80/... long hole size 7x40 for KTT long hole size 7x40 for KTT 150, 250, 350, 450 and 550 long hole size 7x38 for KTT 500 and St St St St St St St St St St St. The load rating shown is valid only for proper anchorage to the building structure. mounting hardware has to be ordered separately: for cable ladders 2x KLT 6 and 2x UGM 6 Protective Cap color K10 KA yellow ,4 10 St. to cover the tips of the brackets To prevent accidents and injuries you must install protective end caps. To be used for: support brackets KTA , E3 and E5 KTU , E3 and E5 KTT racket heavy-duty with pre-installed clamp length admissible (A) load at L/2 kn KTTS ,8 KTTS ,2 KTTS ,9 KTTS ,9 To be used for: profile I 80/... and overhead hanger HI 80/... The load rating shown is valid only for proper anchorage to the building structure. hardware has to be ordered separately: for cable tray: LM 6x12 for cable ladder: KLT 6 and UGM 6 for long span cable ladder: WST 2 for long span cable tray: LM 8x16 racket heavy-duty with two pre-installed clamps length (A) admissible load at L/2 kn KTTS ,9 KTTS ,7 KTTS ,9 KTTS ,5 KTTS ,7 To be used for: profile I 80/... and overhead hanger HI 80/... The load rating shown is valid only for proper anchorage to the building structure. hardware has to be ordered separately: for cable tray: LM 6x12 for cable ladder: KLT 6 and UGM 6 for long span cable ladder: WST 2 for long span cable tray: LM 8x16 5

7 SUPPORT SYSTEM Profile I 80 according to DIN 1025 standard length (A) I 80/ I 80/ I 80/ I 80/ I 80/ I 80/ I 80/ I 80/ I 80/ I 80/ I 80/ I 80/ I 80/ x 2 m x 3 m x 6 m for custom-built overhead hangers, vertical cable ladders STIC/STIW and for building support frames Straight Splice Plate VI 80 4 LM 10x25 4 pieces required per joint pairs Paar To be used for: profile I 80/... and overhead hanger HI 80/... Head Plate KI Total thickness of length L the head plate (t) for mounting on horizontal ceilings 6 2 LM 10x Thickness of headplate is included in total length indicated. To be used for: profile I 80/... Head Plate Extender Device KIA St. for extending the center distance in between the anchors and to increase the load rating of the overhead hanger HI 80/ To be used for: overhead hanger HI 80/... and I 80/ profile with head plate KI 80/ 6

8 Head Plate crosswise to profile I 80 KIQ Total thickness of length L the head plate (t) for mounting on horizontal ceilings 6 2 LM 10x Thickness of headplate is included in total length indicated. To be used for: profile I 80/... Clamping Head Plate slot KIDK Total length L 153 thickness of the head plate (t) 8 2 LM 10x25 for clamping to horizontal support beams (max. 240 ) Thickness of headplate is included in total length indicated. To be used for: profile I 80/... Installation mode: crosswise to the support beam hardware has to be ordered separately: 4x HK 610/, 4x HSKS Head Plate vertical, adjustable from -50 to +50 Total thickness of length L the head plate (t) KIGV LM 10x25 for mounting on inclined ceilings and support beams Thickness of headplate is included in total length indicated. To be used for: profile I 80/... Installation mode: in parallel to the support beam Unit is preassembled. Head Plate adjustable from -50 to +50 Total thickness of length L the head plate (t) KIGVQ LM 10x25 for mounting on inclined ceilings and support beams Thickness of headplate is included in total length indicated. To be used for: profile I 80/... Installation mode: crosswise to the support beam Unit is preassembled. 7

9 SUPPORT SYSTEM Tee Connector VIQ 80 2 LM 12x pairs 96 5 Paar 2 pieces required per joint To be used for: profile I 80/... and overhead hanger HI 80/... Wall Support syetric WWI 80 1 LM 12x ,7 50 St. for mounting I 80/ profiles to the wall To be used for: profile I 80/, overhead hangers HI 80/ and vertical cable ladders of type STIC... and STIW... 8

10 C-rail 2986 C-rail, slot 18, perforated, according to DIN EN standard length (A) perforation distance between drill holes S 2986/3 SL ,5x30 50 S 2986/6 SL ,5x /100 L ,5x /200 L ,5x /300 L ,5x /400 L ,5x /500 L ,5x /600 L ,5x /2 L ,5x /3 L ,5x /6 L ,5x30 50 E3 2986/3 E3L ,5x30 50 E5 2986/3 E5L ,5x30 50 E5 2986/6 E5L ,5x m x 3 m x 6 m 15,7 31,4 47,1 62,8 78,5 94, x 2 m x 3 m x 6 m x 3 m x 3 m x 6 m N C-rail 2996 C-rail, slot 22, perforated length (A) 2996/4.5 LRC ,7 N Splice Plate inside SSV LM 12x30 To be used for: C-rail, type Connector racket N SAEI 80 1 SKM 10x35, 1 VM 10 To be used for: C-rail, type

11 {TRAGKONSTRUKTIONEN} Protective Cap color N K03 SKC 88/96 yellow ,3 20 St. protective end cap for rails, free of halogene and silicon To prevent accidents and injuries you must install protective end caps. To be used for: C-rail, type and rackets have to be installed at least 30 above hangers end to allow an easy mounting of the protective end cap. Wall Support syetric WWU LM 10x25 for floor-, ceiling- or wall-mount St. To be used for: U-profile U 50/..., U 5050/..., U 6040/..., U 100/ Wall Support asyetric thickness (t) WWA LM 10x25 E3 WWA 100 E3 4 1 LM 10x25 E3 for floor-, ceiling- or wall-mount St. 19,4 50 St. To be used for: Stainless Steel U-Profile U 50/..., U 6040/..., U 100/... U-profile U 50/..., U 5050/..., U 6040/..., U 100/ Angle Joint E3 TRV TRV 40 E ,5 10 St. 40,5 10 St. for connecting U-Profile or to use as a junction plate for overhead hangers To be used for: U 5050/..., U 6040/... and C-profiles please order mounting hardware based on application racket adjustable from -30 to +30 E3 AWG 110/140 AWG 110/140 E3 for mounting on inclined ceilings 2 LM 10x25 2 LM 10x25 E St St. To be used for: U-Profile and Rails center distance of long holes 13x18 :

12 Yoke-Clamp with pressure cradle for cable Ø bolt head thread U slotted screw M 6 U slotted screw M 6 U slotted screw M 6 U slotted screw M 6 U slotted screw M 6 U slotted screw M 6 U slotted screw M 6 U slotted screw M 6 U slotted screw M 6 U slotted screw M 6 U slotted screw M 8 U slotted screw M 8 U slotted screw M 8 U slotted screw M 8 U slotted screw M 8 U slotted screw M 8 U slotted screw M 8 U slotted screw M 8 U slotted screw M 8 U slotted screw M 8 U slotted screw M 8 E3 U 12 E slotted screw M 6 E3 U 14 E slotted screw M 6 E3 U 18 E slotted screw M 6 E3 U 22 E slotted screw M 6 E3 U 26 E slotted screw M 6 E3 U 30 E slotted screw M 6 E3 U 34 E slotted screw M 6 E3 U 38 E slotted screw M 6 E3 U 42 E slotted screw M 6 E3 U 46 E slotted screw M 8 E3 U 50 E slotted screw M 8 E3 U 54 E slotted screw M 8 E3 U 58 E slotted screw M 8 E5 U 12 E slotted screw M 6 E5 U 14 E slotted screw M 6 E5 U 18 E slotted screw M 6 E5 U 22 E slotted screw M 6 E5 U 26 E slotted screw M 6 E5 U 30 E slotted screw M 6 AL U 14 AL DIN 84 M 6 AL U 18 AL DIN 84 M 6 AL U 22 AL DIN 84 M 6 AL U 26 AL DIN 84 M 6 AL U 30 AL DIN 84 M 8 AL U 34 AL DIN 84 M 8 AL U 38 AL DIN 84 M 8 AL U 42 AL DIN 84 M 8 AL U 46 AL DIN 84 M 8 AL U 50 AL DIN 84 M 8 AL U 54 AL DIN 84 M 8 AL U 58 AL DIN 84 M 8 AL U 64 AL DIN 84 M 8 for one cable , St. 3,2 100 St. 3,4 100 St. 100 St. 4,1 100 St. 4,4 100 St. 4,5 100 St. 5,6 100 St. 8,2 100 St. 8,5 100 St. 9, St. 10,4 50 St St. 11,8 50 St. 12,75 50 St ,4 20,05 22,4 23,7 2,4 100 St. 2,7 100 St. 2,9 100 St. 3,3 100 St. 4, St. 100 St. 5, St. 6,1 100 St. 6, St. 9,4 100 St. 9,9 50 St St. 12,1 50 St. 2,4 100 St. 2,7 100 St. 2,9 100 St. 3,3 100 St. 4, St. 4, St. 1,4 100 St. 1,6 100 St. 1,7 100 St. 2,1 100 St. 1,6 100 St. 2,5 100 St. 2,7 100 St. 2,9 100 St. 3, St. 3,35 50 St. 3,65 50 St. 3,9 50 St. 4,3 50 St. If ordered in HDG () steel pressure cradle is pregalv. E3 type: Yoke clamp and pressure cradle are made from stainless steel. E5 type: Yoke clamp and pressure cradle are made from stainless steel. AL type: Yoke clamp and pressure cradle are made from aluminum. To be used for: C-rail (18-22 slot ) counter pressure cradle (GWU/GWS) must be ordered separately 11

13 Niedax Kleinhuis USA Inc Westbrooke Drive Columbus, OH NIEDAX Middle East ZE Jafza View 18 Jebel Ali, Dubai Headquarters: NIEDAX GmbH & Co. KG Asbacher Straße 141 D Linz/Germany Tel.: ax: Tel.: ax: dubai@niedax.com Tel: ax: export@niedax.de HEAVY DUTY CALE LADDER 2009