EX 3 x 3 EXTRUSION SERIES. Issue Date: 03/07/2018 EXTRUSION
|
|
- Shawn Bond
- 5 years ago
- Views:
Transcription
1 EX 3 x 3 EXTRUSION SERIES Issue Date: 03/07/2018 EXTRUSION
2 ModTruss 3 x 3 Extrusion (No Splice) Table Uniformly Uniformly Distributed Distributed Center Center Point Third Point Quarter Quarter Point Point by feet) by feet) by by 1) 1) by by 2) 2) by 3) by 3) Extrusion Extrusion Span Span Feet Total Total Total Total Feet Total Total Total Total (Meters) UDL (Meters) UDL 5 (1.524) 3,525 2,182 2,532 2,748 5 (1.524) 3,525 2,182 2,532 2,748 (1,598.91) (989.73) (1,148.49) (1,246.47) (1,598.91) (989.73) (1,148.49) (1,246.47) 10 (3.048) (3.048) 850 (385.55) (17.01) (238.59) (17.01) (276.69) 610 (16.76) (300.73) 663 (17.01) (385.55) (17.01) (238.59) (17.01) (276.69) (16.76) (300.73) (17.01) 15 (4.572) (4.572) 345 (156.48) 210 (95.25) (110.67) 244 (119.74) (6.096) (156.48) (95.25) 92 (110.67) 106 (119.74) (6.096) 140 (63.50) (34.03) (41.73) 92 (48.08) 106 (53.07) 117 (63.50) (34.03) (41.73) (48.08) (53.07) KEY FEATURES T-Slot combined KEY FEATURES within a structural beam T-Slot Keyway combined (aka Keder within Track a or structural Screw-boss) beam Keyway Compatible (aka with Keder all Track ModTruss or Screw-boss) products Compatible Continuous with length all up ModTruss to 40 products Continuous 4 available slots length up to 40 4 available slots Fifth Fifth Point Point by 4) by 4) Total Total 2,908 2,908 (1,319.04) (1,319.04) 700 (317.51) 700 (317.51) 280 (127.00) 280 (127.00) 124 (56.24) 124 (56.24) (17.01) (17.01) Information extracted from the structural report by Clark Reder Engineering Mosteller Lane West Chester OH Ph Date: 11/7/2017 CRE Project No Drawn by: JMR/DDL S1.1 Information extracted from the structural report by Clark Reder Engineering Mosteller Lane West Chester OH Ph Date: 11/7/2017 CRE Project No Drawn by: JMR/DDL S Sheboygan St. Fond du Lac, WI USA
3 Part Number: MT-EX AL Issue Date: 10/31/ x 3 ModTruss TM Extrusion Part Number: MT-EX AL* *Units in inches Series: Extrusion Standard Material: Standard Finish: 6061-T6 Aluminum 02 - No Finish Available Finish(es): Size: Weight: Hole Size: Recommended Hardware: Recommended Tools: 3 x 3" x User defined length (76.20mm x 76.20mm x User defined length) Max length: No Finish, Finishes 3.56lbs (1.61kg) *Weight per foot T-Slot: x 1.50 (16.67mm x 38.10mm) Keyway (aka Keder Track or Screw-boss): 10.5mm ModTruss Nut Bars ModTruss Insert Nuts 3 Blind Connector - MT-HW-BC AS ModTruss TM Tool Kit 1 12 Miter Saw 6 Hex Key Wrench Cluster - MT-TK-HX-00-0-SAE Associated Products: -- See more at: ModTruss.com Electrical Hazard Flammability In Stock Made To Order Customizable Reusable Compatible Serialized & Traceable U.S. Patent No. 8,418,425 & other patents pending
4 Part Number: MT-EX AL Issue Date: 10/31/2017 Series: Extrusion FITS 8.5MM KEDER WELT PRECISION LEVEL : MED - ±.06 [1.59] BRACKET [ ] DIMENSIONS ARE IN MM 10/12/2017 REVISION: NR DESCRIPTION: EXTRUSION, 3" x 3", ALUMINUM PART NUMBER: MT-EX AL U.S. Patent No. 8,418,425 & other patents pending
5 EX 6 x 12 EXTRUSION SERIES Issue Date: 03/07/2018
6 Extrusion Span Feet (Meters) Uniformly Distributed by feet) Extrusion Span Feet 5 (1.52) (Meters) 81, (3.04) 5 (1.52) 81,920 58,290 (26,439.89) 10 (3.04) 58, (4.57) 29,370 (26,439.89) 15 (4.57) (13,322.00) 29, (6.09) 16,340 (13,322.00) 20 (6.09) (7,411.69) 16,340 (7,411.69) 25 (7.62) 10, (7.62) (4,649.32) 10,250 (4,649.32) 30 (9.14) 6, (9.14) 6,930 (3,143.39) (3,143.39) 35 (10.66) 35 (10.66) 4,900 4,900 (2,222.60) (2,222.60) ModTruss 6 x 12 Extrusion (Internal Splice Tube) Table Uniformly Distributed by feet) (2.54) (14.98) (50.8) (50.8) (59.18) (59.18) Center Point by 1) 58,406 (26,492.51) 58,406 29,144 (26,492.51) (13,219.49) 29,144 18,175 (13,219.49) (8,244.04) 18,175 10,110 (8,244.04) (4,585.81) 10,110 (4,585.81) 6,351 (2,880.76) 6,351 (2,880.76) 4,286 4,286 (1,944.09) (1,944.09) 3,022 3,022 (1,370.75) (1,370.75) (3.04) (3.04) (11.93) (11.93) (50.8) (50.8) (59.18) Third Point by 2) 81,920 81,920 43,716 (19,829.24) 43,716 (19,829.24) 21,096 (9,568.98) 21,096 (9,568.98) 11,734 (5,322.45) 11,734 (5,322.45) 7,370 (3,342.97) 7,370 (3,342.97) 4,974 4,974 (2,256.16) (2,256.16) 3,508 (1,591.20) (3.55) (3.55) (15.49) (15.49) (50.8) (50.8) (59.18) (59.18) Quarter Point by 3) ModTruss 6 x 12 Extrusion (Internal Splice Tube) Table (2.54) (14.98) Center Point by 1) Third Point by 2) Quarter Point by 3) 81,921 (37,158.74) 81, (37,158.74) 43,716 (3.30) (19,829.24) 43, (19,829.24) 22,902 (14.22) 22,902 (10,388.17) (10,388.17) 12,741 12,741 (5,779.22) (5,779.22) 8,004 8,004 (3,630.55) (3,630.55) 5,400 5,400 (2,449.39) (2,449.39) (50.8) 3,807 3,807 (1,726.82) (1,726.82) by 4) Fifth Point by 4) Information extracted from the structural report by Clark Reder Engineering Mosteller Lane West Chester OH Ph Date: 11/7/2017 CRE Project No Drawn by: JMR/DDL S (3.30) (14.22) (50.8) (59.18) Fifth Point 81,920 81, ,572 (3.04) (22,031.88) 48, (22,031.88) 24,236 (14.98) 24,236 (10,993.26) (10,993.26) 13,480 13,480 (6,114.42) (6,114.42) 8,468 8,468 (3,841.02) (3,841.02) 5,716 5,716 (2,592.73) (2,592.73) (50.8) 4, (1,827.07)(59.18) 40 (12.19) 40 (12.19) 3,520 3, ,184 2, , ,751 2, ,912 2, (1,596.64) (990.64) (1,149.40) (1,247.83) (1,320.86) (1,596.64) (990.64) (1,247.83) (1,320.86) 45 (13.71) 2,565 1,594 1,850 2,010 2, (13.71) 2,565 1,594 1,850 2,010 2,124 (1,163.46) (723.02) (839.14) (911.72) (963.43) (1,163.46) (723.02) (839.14) (911.72) (963.43) 50 (15.24) 1,850 1,158 1,344 1,461 1, (15.24) 1,850 (839.14) 1,158 (525.26) (609.62) 1,344 (662.69) 1,461 (700.34) 1,544 (839.14) (525.26) (609.62) (662.69) (700.34) 55 (16.76) 1, ,038 1, (16.76) 1,320 (598.74) (93.21) 823 (373.30) (93.21) (433.63) 956 (93.21) (470.82) 1,038 (93.21) (497.13) 1,096 (93.21) 60 (18.28) (598.74) 900 (93.21) (373.30) 556 (93.21) (433.63) (93.21) 702(470.82) (93.21) 740 (497.13) (408.23) (101.85) (252.19) (293.02) (318.42) (335.66) 60 (18.28) Information (408.23) extracted from the structural (101.85) report by Clark Reder (252.19) Engineering Mosteller Lane West Chester (293.02) OH Ph Date: 11/7/2017 (318.42) CRE Project No Drawn by: JMR/DDL (335.66) S (59.18) 4,028 (1,827.07) (3.04) (14.98) (50.8) (59.18) (93.21) KEY FEATURES T-Slot combined within a structural beam KEY Keyway FEATURES (aka Keder Track or Screw-boss) Compatible T-Slot combined with all within ModTruss a structural products beam Continuous Keyway (aka length Keder up to Track 40 or Screw-boss) 12 Compatible available slots with all ModTruss products Continuous length up to available slots 33 Sheboygan St. Fond du Lac, WI USA
7 Part Number: MT-EX AL Issue Date: 10/31/ x 12 ModTruss TM Extrusion Part Number: MT-EX AL* *Units in inches Series: Extrusion Standard Material: Standard Finish: 6063-T5 Aluminum 02 - No Finish Available Finish(es): Size: Weight: Hole Size: Recommended Hardware: Recommended Tools: 6 x 12" x User defined length (152.40mm x mm x User defined length) Max length: No Finish, Finishes 14.58lbs (6.61kg) *Weight per foot T-Slot: x (16.67mm x 33.34mm) Keyway (aka Keder Track or Screw-boss): 10.5mm ModTruss Nut Bars ModTruss Insert Nuts 3 Blind Connector - MT-HW-BC AS ModTruss TM Tool Kit 1 6 Hex Key Wrench Cluster - MT-TK-HX-00-0-SAE Associated Products: -- See more at: ModTruss.com Electrical Hazard Flammability In Stock Made To Order Customizable Reusable Compatible Serialized & Traceable U.S. Patent No. 8,418,425 & other patents pending
8 Part Number: MT-EX AL Issue Date: 10/31/2017 Series: Extrusion FITS 8.5MM KEDER WELT PRECISION LEVEL : MED - ±.06 [1.59] BRACKET [ ] DIMENSIONS ARE IN MM 10/12/2017 REVISION: NR DESCRIPTION: EXTRUSION, 6" x 12", ALUMINUM PART NUMBER: MT-EX AL U.S. Patent No. 8,418,425 & other patents pending
PA PIPE ADAPTERS. Issue Date: 02/08/2018
PA PIPE ADAPTERS Issue Date: 02/08/2018 2 Pipe Adapter 0º MT-PA-06-06-02-00 6 Plate to 2 Pipe 90º MT-PA-06-06-02-90 12 Plate to 2 Pipe 90º MT-PA-12-12-02-90 6 Plate to 1.5 Pipe 90º MT-PA-06-06-1.5-90 12
More informationSHIMLESS INDUSTRIAL LINEAR BEARINGS - PATENT PENDING
08 LINEAR MOTION SHIMLESS INDUSTRIAL LINEAR BEARINGS - PATENT PENDING Shimless Industrial Linear Bearings are designed to be used in both low and high acceleration/deceleration applications. The Shimless
More informationRenogy MTS-TM100. Flat Roof Tilt Mount E Philadelphia St, Ontario, CA Version: 1.1
Renogy MTS-TM100 Flat Roof Tilt Mount 2775 E Philadelphia St, Ontario, CA 91761 1-800-330-8678 1 Version: 1.1 Important Safety Instructions Please save these instructions. This manual contains important
More informationImportant: Please read these instructions carefully and completely before starting the installation. TITAN Fuel Tanks INSTALLATION GUIDE
TITAN pt. no.: 01 0000 0136 Important: Please read these instructions carefully and completely before starting the installation. TITAN Fuel Tanks INSTALLATION GUIDE 30 Gallon* Spare Tire Auxiliary Fuel
More informationImportant: Please read these instructions carefully and completely before starting the installation. TITAN Fuel Tanks INSTALLATION GUIDE
TITAN pt. no.: 02 0000 0180 Important: Please read these instructions carefully and completely before starting the installation. TITAN Fuel Tanks INSTALLATION GUIDE 30 Gallon* Spare Tire Auxiliary Fuel
More informationPOWER RAIL P4 ASSEMBLY INSTRUCTIONS. step-by-step assembly and installation. Version 1, Rev A PCN
TM POWER RAIL P4 ASSEMBLY INSTRUCTIONS step-by-step assembly and installation Version 1, Rev A PCN 080814-1 TM Power Rail P4 WARNING: Follow the procedures and precautions in these instructions carefully.
More informationCable Tray CT2D-18. Tray2Day SM. cable tray service program
Cable Tray CT2D-18 Tray2Day SM cable tray service program * * At, we believe that power is a fundamental part of just about everything people do. That s why we re dedicated to helping our customers s find
More informationPOWER RAIL TM P8. Assembly Instructions. step-by-step assembly and installation. Version 2, Rev A SP PCN
POWER RAIL TM P8 Assembly Instructions step-by-step assembly and installation Version 2, Rev A SP3412-2 PCN 021317-1 Power Rail TM P8 Ratings The Power Rail P8 conforms to ANSI/UL UL2703 (2015) Standard
More informationClearSpan Curtain Tube Support System with Electric Drive Motor (300w)
ClearSpan Curtain Tube Support System with Electric Drive Motor (300w) TTENTION: This guide describes the assembly and installation of roll-up curtains. The design flexibility of these curtain systems
More informationInstallation, Maintenance, and Parts Manual. Flextrac Conveyors. Driven By Customers Powered by Proven Products. Table of Contents
Driven By Customers Powered by Proven Products Section I General Table of Contents Warnings General Safety 1.01 Foreword 1.02 Product Description 1.03 Tools Required 1.04 Section II Setup and Installation
More informationMounting Bracket for Antenna EXTENT D5501i
Model Number: 62-28-09 TM Mounting, / Wall Installation for EXTENT D5501i Mounting for EXTENT D5501i / Wall Mount DESCRIPTION: Galtronics mounting bracket offers an easy installation solution to mount
More informationEXTERNALLY SWAGED FITTING
EXTERNALLY SWAGED FITTING DESIGN CONCEPT The Externally Swaged fitting was originally developed by McDonnell Douglas (prior to become Boeing) who granted the manufacturing authority to Airdrome Precision
More information4' x 10' Assembly Instructions. We re Here To Help! Call Toll Free Section Roll In Dock Shown
4' x 10' Assembly Instructions TM 4 Section Roll In Dock Shown We re Here To Help! Call Toll Free 1-888-752-9782 Customer Service: Monday - Friday, 8:00 A.M. to 5:00 P.M. C.S.T. TABLE OF CONTENTS - ALUMINUM
More informationThe HMC-Lite Construction Guide
The HMC-Lite Construction Guide The Heavy Metal-Lite Chassis is constructed using two identical drive modules. The drive modules are constructed using 3 mechanical sub-assemblies. The drive modules are
More informationINSTALLATION MANUAL
INSTALLATION MANUAL 2055101 Parts List 1 Driver / left, side bar / running board 1 Passenger / right, side bar / running board 8 VersaTrac mounting bracket, universal 16 Clip nut, M8* 32 Hex bolt, M8-1.25
More informationAriel Atom Standard Hardware Build List
Brammo Grade and STAINLESS STAINLESS Key ITEM PN QTY Size Type Material Finish Detail TORQUE SPECS TORQUE SPECS TORQUE SPECS IN FT-LBS IN FT-LBS IN IN-LBS 0 (PT) Power train 1 PT 1 HF-M12-60 9 M12-1.75
More informationHitch Receiver OEM INSTALLATION MANUAL
Hitch Receiver OEM INSTALLATION MANUAL TABLE OF CONTENTS Introduction 2 Safety 3 Resources Required 3 Installation 4 2" and 2 1/2" Accessory Hitch Receiver 4 Bike Rack /Accessory Hitch Receiver 6 Boat
More informationClearSpan Curtain Tube Support System (Manual Gearbox)
ClearSpan Curtain Tube Support System (Manual Gearbox) ATTENTION: This guide describes the assembly and installation of roll-up curtains. The design flexibility of these curtain systems allow for a variety
More informationActuator Products Rodless Cylinders. GDL Series. Material specifications. Specifications OSP-P. Series. Series P1X. Series P1Z.
Catalog PDN1-3US High Performance : (s FDC12HP-... thru FDC45HP-...) The High Performance series is the basis for s development, which is used in the majority of applications. High Performance guides consist
More informationInstallation, Maintenance, and Parts Manual. 125 Series Conveyors. Driven By Customers Powered by Proven Products.
Driven By Customers Powered by Proven Products Section I General Table of Contents Warnings General Safety 1.01 Foreword 1.02 Product Description 1.03 Tools Required 1.04 Section II Setup and Installation
More informationT&B Cable Tray. Nonmetallic Strut Systems NM -SS P- 100 ( ) ( ) Channels
Channels Thomas & Betts is proud of its line of nonmetallic strut and accessoires. You ll find a complete selection of nonmetallic accessoires, fasteners, hangers, pipe clamps and channels. Most Thomas
More informationInstallation Instructions Dodge Ram P/N D80014
Patent # US 7,100,956 BA Installation Instructions Dodge Ram 94-01 P/N D80014 CAUTION IT IS NOT RECOMMENDED MOUNTING THE TIREGATE ON TRUCKS THAT HAVE REAR FIBER GLASS REPLACEMENT FENDERS. THE BED DOES
More informationWisconsin Housing Statistics
Wisconsin Housing Statistics Monthly Year-to-Date Dec 2018 Dec 2017 % Change Jan-Dec 2018 Jan-Dec 2017 % Change Unit Sales 4,980 5,728-13.1% 82,760 84,594-2.2% Median Price $179,000 $170,000 +5.3% $184,000
More informationWESTERN PRODUCTS, P.O. BOX , MILWAUKEE, WI TRUCK MOUNT. Installation Instructions
WESTERN PRODUCTS, P.O. BOX 245038, MILWAUKEE, WI 53224-9538 Lit. No. 64090 June 2, 2004 3519 TRUCK MOUNT Installation Instructions Chevy/GMC 1500 4X4 1999 & Later Read this document before installing the
More informationRemote Oil Filter Mount with Integrated Thermostat
Remote Oil Filter Mount with Integrated Thermostat Part No. ENV-170 Made in USA Important: Read these instructions in their entirety prior to installation. Rev 170922 Parts List ITEM QUANTITY PART # DESCRIPTION
More informationAssembly & Installation Instructions
TM P R O D U C T S Assembly & Installation Instructions FOR 28 SERIES SNOWPLOW PIVOT ASSEMBLY AND FLOAT LIMITER 99103000 FOR SERIAL NUMBERS 28D100000 TO 28D100770 97100552A 1. THINK SAFETY, ALWAYS WEAR
More informationPRO 2 SERIES PSLCSE LEG CURL
PRO SERIES PSLCSE LEG CURL Page Customer Support Services PARTS MANUAL CONTENTS PAGE COMPONENT ASSEMBLY COMPONENT ASSEMBLY LEGEND SIDE FRAME ASSEMBLY 5 SIDE FRAME ASSEMBLY LEGEND 6 SEAT FRAME ASSEMBLY
More informationSolar collector racking system CALEFFI NAS100 series ACCREDITED Function Product range NAS100 NAS100 NAS100 NAS100
Solar collector racking system NS100 series CCREITE ISO 9001 FM 21654 ISO 9001 No. 0003 CLEFFI 01281/14 N Replaces 01281/13 N The collectors must be mounted to two horizontal NS100 series four slot rails.
More informationPolyline Polycarbonate Enclosures
TM Polyline Polycarbonate Enclosures Authorized Distributor: From Allied Moulded Products, Inc. Experts in manufacturing nonmetallic enclosures for industrial applications WESCHLER INSTRUMENTS 800-903-9870
More informationANALOG. PARAMETER SPECIFICATION Measured Variable: Displacement, Velocity (magnitude only) 16 bit or mm, whichever is greater
T E M P O S O N I C S I I I ANALOG P r o d u c t S p e c i f i c a t i o n s F e a t u r e s Superior resolution and repeatability Absolute displacement and velocity measurement Modular, non-contacting
More informationSL3 UPGRADE KIT INSTALLATION MSC SL3 UPGRADE KIT MSC SL3 UPGRADE KIT, NGE
SL3 UPGRADE KIT INSTALLATION MSC19050 - SL3 UPGRADE KIT MSC17070 - SL3 UPGRADE KIT, NGE BOSS PRODUCTS reserves the right under its continuous product improvement policy to change construction or design
More informationSeries 2, 3, 4 Steel Cable Ladder Steel Cable Ladder, Series 2, 3, 4 & 5
Cable Ladder with Slotted Rung (shown with alternating slot orientation) Cable Ladder with Slotted Rung (shown with continuous slot down - also available with continuous slot up) HDS-1 Steel Cable Ladder,
More informationSCION FR-S FOG LIGHTS
Part #: PT413-18130 Conflicts: Lowering Springs PTR07-18130-LL (California only) Kit Contents: For Anniversary Edition, Monogram & RS 2.0 vehicles, additional parts need to be ordered (PT413-18130-LL)
More information415/417NR NOTEBOOK TRAY ASSEMBLY & OPERATION INSTRUCTIONS
6703 Zinser Street Schofield, WI 4476 Version Dated: 2/27/1 41/417NR NOTEBOOK TRAY ASSEMBLY & OPERATION INSTRUCTIONS Read all the instructions before beginning. Hardware Pack # 2372 & 031 (Track Hardware)
More informationSeries 1 Steel - Straight Sections
Series 1 Steel - Straight Sections Series 1 Steel H-1 B-Line series Cable Tray Systems Series 1 Steel - ccessories & Fittings Series 1 Steel How The Service dvisor Works We know that your time is important!
More informationOptical Kit Encoder Page 1 of 10. Description. Related Products & Accessories. Features
Description Page 1 of 10 The E2 is a rotary encoder with a molded polycarbonate enclosure, which utilizes either a 5-pin locking or standard connector.this optical incremental encoder is designed to easily
More informationBattery Equalizers & Converters
Equalizers Converters Stock No. Sure Power P/N Input Voltage Output Voltage Output Current Stock No. Sure Power P/N Input Voltage Output Voltage Output Current 80098 12025E00 12V DC 24V DC 40 amps 80114
More information7 x 16 Stainless. Steel with. 5/16 studs. 1162H - 7 x16 Heated Polished Stainless Steel, w/wire harness, w/o plug. AV-13017
WEST COAST MIRRORS 161 W-180 7 x 16 Steel Head (White) with 5/16 studs 60-310 7 x 16 Flange Mount Mirror,. Fits International S Series ML-10-132 7 x 16 (White) with 5/16 studs 1159 7 x 16 Stainless Steel
More informationInstallation Guide Stack Mount Kit for Philips G5 and MP5/20/30/40/50/60/70 Monitor
Installation Guide Stack Mount Kit for Philips G5 and MP5/20/30/40/50/60/70 Monitor The purpose of this guide is to describe installation of the Stack Mount. Parts Reference The following parts and hardware
More information350 S. St. Charles St. Jasper, In Ph Fax
350 S. St. Charles St. Jasper, In. 47546 Ph. 812.482.2932 Fax 812.634.6632 www.ridetech.com Part # 30154700 Big Red Analog Compressor Kit Components: 2 31920020 Thomas compressor 1 31915100 5 gallon aluminum
More information7350 Series Power Transfer
750 Series Power Transfer Installation, Maintenance and Parts Manual DORNER MFG. CORP. INSIDE THE USA OUTSIDE THE USA P.O. Box 0 975 Cottonwood Ave. TEL: -800-97-8664 TEL: 6-67-7600 Hartland, WI 509-000
More informationSCION tc FOG LIGHT. Part Number: STC-312 / STC-812
SCION tc 2011-2013 FOG LIGHT Part Number: STC-312 / STC-812 Kit Contents Item # Quantity Reqd. Description 1 2 Fog Lamps 2 2 Fog Light bezels 3 1 Switch Assembly 4 1 Fog Light Operation guide 5 1 Harness
More informationBlizzard, PO Box , Milwaukee, WI UNDERCARRIAGE KIT. Dodge Ram 2500/3500. Installation Instructions CAUTION
Blizzard, PO Box 245038, Milwaukee, WI 53224-9538 www.blizzardplows.com November 15, 2009 Lit. No. 41415, Rev. 00 33885 UNDERCARRIAGE KIT Dodge Ram 2500/3500 2010 - Installation Instructions Read this
More informationSeries 3 & 4 Stainless Steel - Accessories
- Accessories Splice Plates Standard 8-hole pattern for all steel splice plates. One pair including hardware provided with straight section. (Expansion splice quantity subtracted) Boxed in pairs with hardware.
More informationEngineer The Lift!! HOIST RINGS. Applied Load Changes With Sling Angle. Sample Calculation: DO S DON TS
H&O DIE SUPPLY, INC. 1-800-222-5441 sales@hodie.com HOIST RINGS 10 Adjustable Alloy Chain Sling... 10.16 Center Pull Style... 10.4-10.5 Envirolox Protective Finish... 10.11 Eye Bolts... 10.15 Eye Nuts...
More informationInstallation Guide. Installation Guide. Exploded Views Installation Instructions Mounting System Parts List. USTarp.
Installation Guide Installation Guide Exploded Views Installation Instructions Mounting System Parts List USTarp.com 800-249-0297 Fits dump trailers up to 40 long, or up to 45 long with Bulletproof HD
More informationIndustrial Power Tools PERFORMANCE DRIVEN TRADE FOCUSED SYSTEM WIDE
Industrial Power Tools The MILWAUKEE M18 cordless system represents the ultimate synergy of game-changing performance, professional grade power and extreme durability. Powered by REDLITHIUM battery technology
More informationTITAN Fuel Tanks INSTALLATION INSTRUCTIONS. Trail Trekker II Fuel Tank ( and ) 12 Gallon Fuel Tank for Jeeps, Trucks and SUVs.
Important: Please read these instructions carefully and completely before starting the installation. TITAN Fuel Tanks INSTALLATION INSTRUCTIONS Trail Trekker II Fuel Tank (4040287 and 4040387) 12 Gallon
More informationCGB CC5 ALUM - Aluminum Box CGB CC5 BLK - Black Steel Box Installation Instructions for 1982 & Up Club Car DS Cargo Boxes
CGB CC5 ALUM - Aluminum Box CGB CC5 BLK - Black Steel Box Installation Instructions for 1982 & Up Club Car DS Cargo Boxes 2000.5 & Up Mounting Shown CAUTION: DO NOT TRANSPORT PASSENGERS IN CARGO BOX. C/2S
More informationTILT KIT - POWER RAIL P8 ASSEMBLY INSTRUCTIONS. step-by-step assembly and installation. Version 1, Rev E SP3436 PCN
TILT KIT - TM POWER RAIL P8 AEMBLY ITRUCTIO step-by-step assembly and installation Version 1, Rev E P3436 PC 021412-2 TM Tilt Kit Power Rail P8 WARIG: Follow the procedures and precautions in these instructions
More informationSUPPORTS, CANOPY W/CABLE ASSEMBLY INSTRUCTIONS KIT P/N
SUPPORTS, CANOPY W/CABLE ASSEMBLY INSTRUCTIONS KIT P/N 512-00010-00 CANOPY SUPPORTS INSTALLATION AND ADJUSTMENT Tools required: 1-7/8 open end wrench 1-3/4 open or box end wrench (or a rachet and 3/4 socket)
More informationOptical Kit Encoder Page 1 of 10. Description. Mechanical Drawing. Features
Description Page 1 of 10 The E2 is a rotary encoder with a molded polycarbonate enclosure, which utilizes either a 5-pin locking or standard connector.this optical incremental encoder is designed to easily
More informationVHX-67F-MUS Dakota Digital VHX Instrument Installation For Ford Mustang Your new VHX-67F-MUS kit includes:
VHX-67F-MUS Dakota Digital VHX Instrument Installation For 1967-68 Ford Mustang Your new VHX-67F-MUS kit includes: VHX Display Hardware Pack CAT5 Cable Installation Manuals Universal Sender Pack Installation
More informationSSI. Synchronous Serial Interface
T E M P O S O N I C S R S E R I E S SSI Synchronous Serial Interface P r o d u c t S p e c i f i c a t i o n s PARAMETER Measured Variable: Resolution: Non-Linearity: SPECIFICATION Displacement Up to 0.002
More informationEasy Cover. Installation Instructions. Attention Dealers: Please give this owners manual to the customer when the product is delivered.
Serving the Truck & Trailer Industry Since 944 Easy Cover Attention Dealers: Please give this owners manual to the customer when the product is delivered. Call 00-3-94 www.aeroindustries.com Indianapolis,
More informationFactory Five Racing, Inc. 818 Kit Assembly manual revision 1i update
Factory Five Racing, Inc. 818 Kit Assembly manual revision 1i update Pedal box...1 Cable Accelerator Pedal (2002-2005)...2 OEM seats...7 Windshield... 13 Center console... 19 Pedal box Attach the pedal
More informationR and R Meritor WABCO Enhanced Easy-Stop Trailer ABS Replacement Kits for Easy-Stop ECU/Modulator Valve Assembly Part Number
Issued 06-03 Installation Guide Hazard Alert Messages Read and observe all Warning and Caution hazard alert messages in this publication. They provide information that can help prevent serious personal
More informationSHIMLESS INDUSTRIAL LINEAR BEARINGS
08 LINEAR MOTION SHIMLESS INDUSTRIAL LINEAR BEARINGS Shimless Industrial Linear Bearings are designed to be used in both low and high acceleration/deceleration applications. The Shimless Industrial Linear
More informationNorthStar. brand. Instruction Manual. SLIM Tach SL Thru-Shaft Diameter. Magnetoresistive Encoder Designed for GE Wind Energy
NorthStar TM brand Instruction Manual SLIM Tach SL56 1.125 Thru-Shaft Diameter Magnetoresistive Encoder Designed for GE Wind Energy Patent Pending *791-1061-00* Rev. B Page 2 Table of Contents Chapter/Paragraph/Illustration
More informationDodge Ram Quad Cab A Dodge Ram Quad Cab 2500/ A Dodge Ram Mega Cab A
INSTALLATION GUIDE APPLICATION MODEL YR AMP PART # Dodge Ram Quad Cab 1500 2002-2008 5101-01A Dodge Ram Quad Cab 2500/3500 2003-2009 5101-01A Dodge Ram Mega Cab 2006-2009 5118-01A INSTALLATION TIME 3-5
More informationThe HMC Heavy Metal Chassis Construction Guide
The HMC Heavy Metal Chassis Construction Guide The Heavy Metal Chassis is constructed using two identical drive modules. The drive modules are constructed using 4 mechanical sub-assemblies. The drive modules
More informationLM SERIES LINEAR MODULE
LM SERIES LINEAR MODULE THE LM RODLESS LINEAR ACTUATOR RACO s LM Linear Modules are lightweight positioning elements, which can be easily configured into a wide variety of multiple axis motion systems.
More informationGEMINI HOUSING SPECIFICATIONS
GEMINI HOUSING SPECIFICATIONS GENERAL Gemini Housing shall support Track of six foot intervals. In addition, the extra compartment shall be able to be used for a multitude of elec trical or mechanical
More informationJeep Wrangler (TJ)
INSTALLATION GUIDE APPLICATION MODEL YR PART # Bestop PART # Jeep Wrangler (TJ) 2003 2006 10-03315-10 751-01 INSTALLATION TIME 3:00 hrs SKILL LEVEL 1 2 3 4 4= Experienced TOOLS REQUIRED Safety goggles
More informationReproduction. Not for. Electric Pressure Washer. Illustrated Parts List. Model Mfg. No. Description ,800 PSI Briggs & Stratton
Illustrated Parts List Electric Pressure Washer Model Mfg. No. Description 020358-0 1,800 PSI Briggs & Stratton This pressure washer is rated in accordance to the Pressure Washer Manufacture Association
More informationGENERAL SAFETY PRECAUTIONS
GENERAL SAFETY PRECAUTIONS WARNING! MOVING PART HAZARDS To prevent serious injury and property damage: Do not operate or install this product without reading and understanding these instructions. Keeps
More informationu FH Extrusion Series Information Brochure FH Extrusions
u FH Extrusion Series Information Brochure FH Extrusions The AGAM Modular System For over 25 years, the AGAM Aluminum Modular Display System provides a quick and efficient way to design attractive retail
More informationMaximum submersible power cable length (max. cable length in feet - starter to motor)
Cable sizing charts V and 0 V, ph V ph 0 V ph 0. 0. 0 (40) 00 (0) 0 (68) 00 0 (9) 90. (8) 0 (46) 0 (7) - 0 (64) 60 (49) 880 (68) (98) 480 (46) 0 90 (8) 0* (4*) 7. 40 (04) 90 (44) 00 () () 60 (9) 480 (46)
More informationDodge Ram Quad Cab A Dodge Ram Quad Cab 2500/ A Dodge Ram Mega Cab A
INSTALLATION GUIDE APPLICATION MODEL YR AMP PART # Dodge Ram Quad Cab 1500 2002-2008 5101-01A Dodge Ram Quad Cab 2500/3500 2003-2009 5101-01A Dodge Ram Mega Cab 2006-2009 5118-01A INSTALLATION TIME 3:00
More informationINSTRUCTIONS DYNA FLOORBOARD KIT 1WARNING -J01921 REV General. Kit contents. Installation SHIFTER ASSEMBLY (LEFT SIDE) Kit Number
General INSTRUCTIONS REV. 10-1-200 Kit Number 50601-01 DYNA FLOORBOARD KIT Kit contents This forward foot controls kit is designed for use on all 1996 and later FXD models and includes all parts required
More informationRoller Chase Frame Price List
Roller Chase Frame Price List Eino Products / Diamond Chase 418 South Motor Avenue, ph (626) 969-1821 fax (626) 969-1599 The All NEW Roller Chase Construction Products team has re-designed the Roller Chase
More informationOPERATOR S MANUAL MAINTENANCE MANUAL PARTS LIST TURFCO CR-7. Broadcast Top Dresser. Product Number Starting Serial Number P00851
OPERATOR S MANUAL MAINTENANCE MANUAL PARTS LIST TURFCO CR- Broadcast Top Dresser Product Number 0 Starting Serial Number P00 US Patent,,0,,0, and,, Manual Number DANGER - IF INCORRECTLY USED THIS MACHINE
More information06-08 Passenger/Right Top Mounting Bracket Driver/Left Top. Mounting Bracket. Driver/Left Frame Mounting Bracket
PARTS LIST: 1 Grille Guard 4 12mm x 44mm OD x 3mm Flat Washers 1 Driver/Left Frame Mounting Bracket 12 12mm x 32mm OD x 3mm Flat Washers 1 Passenger/Right Frame Mounting Bracket 4 12mm Lock Washers 1 Driver/Left
More informationRoller Chase Frame Price List
Roller Chase Frame Price List Eino Products / Diamond Chase 418 South Motor Avenue, ph (626) 969-1821 fax (626) 969-1599 The All NEW Roller Chase Construction Products team has re-designed the Roller Chase
More informationManual Introduction and Overview
Manual Introduction and Overview Safety Alerts and Notices This Product Applications Manual has been written and published by Mercury Marine and is targeted to the boat manufacturer's engineers and designers.
More informationSMIDLEY MINI-SCALE RETROFIT INSTRUCTIONS
TM SMIDLEY MINI-SCALE RETROFIT INSTRUCTIONS Rev. Aug 2015 Smidley Mfg. Inc. Britt, Iowa 50423 800-392-5632 Toll Free www.smidley.com SMIDLEY MINI-SCALE RETROFIT INSTRUCTIONS You have a timeless Smidley
More informationInstallation Guide Philips MP2 IntelliVue M-Series Arm (12'' or 8'') Rail Mount Kit
Installation Guide Philips MP2 IntelliVue M-Series Arm (12'' or 8'') Rail Mount Kit The purpose of this guide is to: 1. Describe mounting of MP2 equipment on Mounting Bracket (page 2). 2. Describe mounting
More information3713 TRUCK MOUNT. Installation Instructions for Personal Plow. CAUTION Read this document before installing the snowplow.
November 1, 2003 Lit. No. 28047 3713 TRUCK MOUNT Installation Instructions for Personal Plow Jeep Liberty 2003 20 Read this document before installing the snowplow. See your sales outlet for application
More informationSeries 1 Steel - Accessories
- ccessories Standard (L-Shaped) Splice Plates One pair including hardware provided with each section. Prepackaged in pairs in a plastic bag, with hardware. 4-hole pattern L-shaped splice plates. L-shaped
More informationNissan Armada up A Nissan Titan Crew Cab up A Nissan Titan King Cab up A
INSTALLATION GUIDE APPLICATION MODEL YR PART # Nissan Armada 200 - up 75110-01A Nissan Titan Crew Cab 200 - up 75110-01A Nissan Titan King Cab 200 - up 75110-01A INSTALLATION TIME 3:00 hrs SKILL LEVEL
More informationSCION XB SUBWOOFER ENCLOSURE Preparation
Preparation Part Number: Kit Contents Item # Quantity Reqd. Description 1 1 Subwoofer enclosure 2 1 Wire Harness 3 1 Paper Template 4 1 Plastic Drill Template 5 1 Hardware Bag Hardware Bag Contents 1 Item
More informationYGE-Z 60 Cell Series PV Modules
YGE-Z 60 Cell Series PV Modules Installation Supplement Yingli Solar Based on Zep Solar Document No. 800-1444-001 Rev F File Generated April 9, 2014 Notices This manual contains important installation
More informationRYOBI 10 in. (254 mm) COMPOUND MITER SAW MODEL NO. TS1340 REPAIR SHEET
RYOBI 10 in. (54 mm) COMPOUND MITER SAW MODEL NO. TS140 REPAIR SHEET FIGURE A 1 5 4 0 1 4 1 1 15 1 1 1 14 1 11 10 5 The model number will be found on a plate attached to the motor housing. Always mention
More informationRRFB Global, Inc RRFB Global Incorporated. EnhancerTM Solar RRFB KIT Specifications. Licensed by R.D. Jones, Stop Experts, Inc.
RRFB Global, Inc. EnhancerTM Solar RRFB KIT Specifications This Unit Protected Under U.S. Patent # s 8,081,087 & 8,269,654 (Other Patents Pending) 2013 RRFB Global Incorporated Licensed by R.D. Jones,
More informationSingle-Sided Storage Rack Assembly Instructions
Single-Sided Storage Rack Assembly Instructions H D I G J K M L F I D B C A E PART NAME QTY A. BASE BAR (50 ) 2 B. BASE BAR HULL GUARD (34 ) 2 C. BASE BAR END CAP 2 D. SAFETY END CAP 4 E. FOOT 4 F. UPRIGHT
More informationPage 1. File: Motolight caliper one-piece Date: 8/14/2006
Page 1 Caliper Mount Installation One-piece mounting brackets You should allow about two to three hours for installation. We suggest you use a well-lighted space for installation. PLEASE READ ALL THE INSTRUCTIONS.
More informationINSTALLATION GUIDE WSD47UINT13 WEAPON STORAGE DRAWER & ASBD47UINT13 ALUMINUM STORAGE DRAWER CURRENT FORD UTILITY INTERCEPTOR
INSTALLATION GUIDE WSD7UINT WEAPON STORAGE DRAWER & ASBD7UINT ALUMINUM STORAGE DRAWER 0 - CURRENT FORD UTILITY INTERCEPTOR STRONG RELIABLE SECURE 800.80.80 THESE COMPONENTS ARE REQUIRED TO INSTALL THE
More informationSeries 3 & 4 Stainless Steel - Accessories
Splice Plates Standard 8-hole pattern for all stainless steel splice plates. One pair including hardware provided with straight section. Boxed in pairs with hardware. Expansion Splice Plates Expansion
More informationMERCER VALVE 1400 SERIES THINK...MERCER FIRST MERCER VALVE CO., INC. AUTO SEAT TECHNOLOGY
MERCER VALVE CO., INC. AUTO SEAT TECHNOLOGY 1400 SERIES MERCER VALVE THINK...MERCER FIRST 1400 Series Product Overview The 1400 Series is a safety relief valve designed for lower capacity systems. The
More informationON-BOARD SCALES. ON-BOA R D WEIGHING S O LUTIONS F O R THE R E FUSE INDUSTRY
VULC NR V ON-BOARD SCALES www.vulcanscales.com ON-BOA R D WEIGHING S O LUTIONS F O R THE R E FUSE INDUSTRY FRONT LOADER SOLUTIONS FRONT FORK SCALE LOAD CELL BODY SCALE DEFLECTION TRANSDUCER SCALE FRONT
More informationKONE EcoMod Escalator Repair Instructions
3.3 Replace drive motor NOTE! When moving the step band during the following procedures, always run the escalator on inspection (use hand held pendant control). 3.3.1 Remove drive motor Complete the following
More informationCANBUS G. Up to mm ( in.) < ± 0.01% of full stroke or ± 0.04 mm ( in.), whichever is greater*
27295 8/11/03 T 7:42 AM Page 1 E M P O S O N I C S R S E R I E S CANBUS 550541 G P r o d u c t S p e c i f i c a t i o n s PARAMETER S P E C I F I C AT I O N Measured Variable: Resolution: Non-Linearity:
More informationUniversal Side of Pole Mount
Page 1 of 8 Universal Side of Pole Mount (Two panels shown, punched channel for a variety of module types.) A. TOP CHANNEL B. BOTTOM CHANNEL C. PANEL RAILS: MAY EITHER BE ALUMINUM ANGLE WITH HOLES PUNCHED
More informationPart # Impala TQ CoilOver Suspension Package
350 S. St. Charles St. Jasper, In. 47546 Ph. 812.482.2932 Fax 812.634.6632 www.ridetech.com Part # 11040311 58 Impala TQ CoilOver Suspension Package Front Components: 1 11053511 TQ Series Front Coilovers
More informationABN Quality Endorsed Company ISO9001 Lic No EDITION 2
ABN 43 8 71 335 SECTION 4 Cable Ladder and A U S T R A L I A W I D E A U S T R A L I A N M A D E Quality Endorsed Company ISO91 Lic No 13146 EDITION 2 SECTION 4: Cable Ladder & Type 3/5 Type 4/7L Type
More informationFORCE BLOWER PUSH Owner s Manual
Accessories HOLD DOWN KIT To secure blower for transportation on trailer floors. Patent #6,253,416 and other patents pending F902S, F902H, F1302H, F1402S, F1802V BILLY GOAT FORCE BLOWER Owner's Manual
More informationRIDGID 10 in. TABLE SAW MODEL NO. TS2400LS REPAIR SHEET. RIDGID SCIE À TABLE DE 254 mm (10 po) NO. DE MODÈLE TS2400LS FEUILLE DE RÉPARATION
RIDGID 10 in. TABLE SAW MODEL NO. TS2400LS REPAIR SHEET RIDGID SCIE À TABLE DE 254 mm (10 po) NO. DE MODÈLE TS2400LS FEUILLE DE RÉPARATION RIDGID SIERRA DE MESA 254 mm (10 pulg.) NÚM. DE MODELO TS2400LS
More informationChannel Cable Tray - Accessories & Fittings
hannel able Tray - Straight Sections E-1 -Line series able Tray Systems hannel able Tray - ccessories & Fittings How The Service dvisor Works We know that your time is important! That s why the color-coding
More informationOPERATOR S MANUAL MAINTENANCE MANUAL PARTS LIST TURFCO METE-R-MATIC III. Top Dresser. Model F12D. Product Number 85423
Model FD OPERATOR S MANUAL MAINTENANCE MANUAL PARTS LIST TURFCO Top Dresser Model FD Product Number U.S. Patents,,;,0,;,0, Other Patents Pending Manual Number Rev B DANGER - IF INCORRECTLY USED THIS MACHINE
More informationBox Contents. 1.) Bumper 2.) Side Bumper Brackets 3.) Vertical Bumper Plate 4.) Lower Bumper Weldment
Installation Manual 2 Box Contents 1 3 2 4 5 6 7 (Images not shown to scale) 1.) Bumper 2.) Side Bumper Brackets 3.) Vertical Bumper Plate 4.) Lower Bumper Weldment 5.) Side Bumper Weldments 6.) Side Strap
More information