TYLDEN HERITAGE R MODEL MACK MAIL ORDER PARTS CATALOGUE

Size: px

Start display at page:

Download "TYLDEN HERITAGE R MODEL MACK MAIL ORDER PARTS CATALOGUE"

Shawn Jerome Rice
6 years ago
Views:

1956 Mack LTL Diesel TYLDEN HERITAGE R MODEL MACK MAIL ORDER PARTS CATALOGUE Custom Classic Truck & Tractor Restorations Business Hours: 0428 507 408 Location: 1906 Trentham Road, Kyneton Vic 3444

1 1956 Mack LTL Diesel TYLDEN HERITAGE R MODEL MACK MAIL ORDER PARTS CATALOGUE Custom Classic Truck & Tractor Restorations Business Hours: Location: 1906 Trentham Road, Kyneton Vic 3444 Australia Note: Our workshop & warehouse are only open by appointment Postal Address: P.O. Box 614, Kyneton Vic 3444 Australia Supplier of after market Mack reproduction and dress up parts Big range of Mack B & R Model bits. Special Interest in: Mack Trucks...Diamond T Trucks...Caterpillar Tractors Trading since tyldenheritage@bigpond.com web: Lee No 3 Pty Ltd A.C.N A.B.N These pages may only be reproduced after obtaining written permission from Tylden Heritage. All rights reserved.

3 INDEX FOR R MACK PARTS 1R. AXLE: Section 1 CHASSIS: ENGINE: Section 1. Bumper, Fuel Tank, Mudflaps, Steering, Tail Shaft. Section 1: Radiator, Starter Motor. 2R BONNET Section 2: Latches, JEWELLERY: Dogs, Emblems. 3R CABIN INTERIOR: Section 3. 4R CABIN EXTERIOR: Section 4. 5R DOOR PARTS: Section 5. SEE GENERAL SECTION CATALOGUE FOR OTHER PART OPTIONS - Parts for Axle, Brakes, Catches, Dress Up, Electrical, Parts Books, Rubber Parts, Reproduction Cast Parts, Steel Name Plates & Instruction Plates & Stickers.

SECTION 1---- R SERIES MACK PARTS CHASSIS PARTS R MODEL DIFF 400 Single axle diff hub to hub ex R

00 AXLE HUB - MODERN CONVERSION 2947 Axle wheel hubs for conversion to 10 stud USA from Spider.

00 2948 Brake drum for 2947. NEW. Price Per Each. 120.

Made in USA POA 3056 R Model standard bumper bar - chrome. New. Weight 25kg.

00 BUMPS STOP SPRING 2819 Front spring buffer, suit R, flat top 2 1/4 high, 2 1/8 diam, 3/4 long

4 SECTION R SERIES MACK PARTS CHASSIS PARTS R MODEL DIFF 400 Single axle diff hub to hub ex R model - ratio 4.25 with springs. 2, AXLE HUB - MODERN CONVERSION 2947 Axle wheel hubs for conversion to 10 stud USA from Spider. Suit 44000lbs diff. Made in USA. NEW. Price Per Each. Mack Part No MK3398HR735K Brake drum for NEW. Price Per Each BUMPER BAR 3055 R Model standard bumper bar - black. New. Made in USA POA 3056 R Model standard bumper bar - chrome. New. Weight 25kg. Length 2450mm, height 450mm. Flanges are 90mm. 1, BUMPS STOP SPRING 2819 Front spring buffer, suit R, flat top 2 1/4 high, 2 1/8 diam, 3/4 long X 3/8 locating bolt...see Rubber Parts General Section for pricing and options BATTERY BOX Heavy duty Mack battery box base with ribbed top - 2 sections. New Heavy duty Mack type battery box, bottom section holds 2 batteries with rubber latch/catch- as on R model - new Page 1 R MODEL-1 AXLE

SECTION 1---- R SERIES MACK PARTS CHASSIS PARTS BATTERY BOX. (cont) 3066 Black steel ribbed top battery box lid cover - correct for R model - NEW 145.

Holds batteries bracket down - 2 required (sold as a kit)- not stocked 10.00 ELEPHANT SPRING INSULATOR FEET 2754 Top insulator, suit 44000. 4 Required. Price Per Each.

SEE RUBBER PARTS IN GENERAL SECTION FOR PRICING 2757 Lower insulator. Suit 34-38 & 44000 rear end. Steel Base 6 1/8 x 6 1/8 1 3/4 dowl. 4 Required. Price Per Each.

5 SECTION R SERIES MACK PARTS CHASSIS PARTS BATTERY BOX. (cont) 3066 Black steel ribbed top battery box lid cover - correct for R model - NEW Steel battery hold down bracket, hold the batteries securely - not stocked Nickel Cadium carriage bolt. Holds batteries bracket down - 2 required (sold as a kit)- not stocked ELEPHANT SPRING INSULATOR FEET 2754 Top insulator, suit Required. Price Per Each. SEE RUBBER PARTS IN GENERAL SECTION FOR PRICING Top insulator suit steel base, 6ins x 4 1/2 ins 1 3/4 dowl. 4 Required. Price Per Each. SEE RUBBER PARTS IN GENERAL SECTION FOR PRICING 2757 Lower insulator. Suit & rear end. Steel Base 6 1/8 x 6 1/8 1 3/4 dowl. 4 Required. Price Per Each.SEE RUBBER PARTS IN GENERAL SECTION FOR PRICING Side spacer of lower insulator Neoprene. 8 Required. Price Per Each. SEE RUBBER PARTS IN GENERAL SECTION FOR PRICING. MUD FLAPS 3086 Mack facing dog. SEE RUBBER PARTS IN GENERAL SECTION FOR PRICING AND OPTIONS. FUEL TANK STRAP 3085 Rubber Fuel Tank Strap - 2 inch. Comes in bag of 12ft. (3.65M) SEE RUBBER PARTS IN GENERAL SECTION FOR PRICING. Page 2 R MODEL-1 AXLE

SECTION 1---- R SERIES MACK PARTS STEERING PARTS BEARING 3095 R Bearing Steering Shaft. Size shaft 1 inch OD 2 inch. 75.00 3096 R Bearing Steering Shaft Firewall.

See Rubber Parts in General Section for pricing and options. 14.50 3098 R Rubber dust boot slip yoke 4 slots to suit shaft. 28.

6 SECTION R SERIES MACK PARTS STEERING PARTS BEARING 3095 R Bearing Steering Shaft. Size shaft 1 inch OD 2 inch R Bearing Steering Shaft Firewall. Size shaft 1 inch hole, centres 3 1/2 inch DUST COVER 3097 R Rubber dust boot steering shaft 1 inch (25mm) round hole. See Rubber Parts in General Section for pricing and options R Rubber dust boot slip yoke 4 slots to suit shaft SHAFT 3091 Shaft steering lower - suit Superliner 2 and other models Shaft steering main - suit Superliner 2 over all length 46 inches (1070mm) as in photo thats with 6 inch (150mm) inside yoke R STEERING YOKE 3088 Yoke. Steering Shaft Ross Box. (.875 inch ID) Page 3 R MODEL-1 AXLE

SECTION 1---- R SERIES MACK PARTS ENGINE 3169 Air starter motor used. Note: Pinion lengths vary. 400.00 3179 Air starter valve remote valve assembly.

00 ENGINE PARTS - 6 CYLINDER WATER PUMP KIT 3106 Suit most 60's & 70's Macks 5/8 shaft.

00 WATER PUMP PARTS E9 V8 3232 Water Pump Kit - 9 Pieces. NOTE: This kit bushes need reaming after fitting. 550.

7 SECTION R SERIES MACK PARTS ENGINE 3169 Air starter motor used. Note: Pinion lengths vary Air starter valve remote valve assembly. NEW V air starter solonoid control valve - to suit NEW ENGINE PARTS - 6 CYLINDER WATER PUMP KIT 3106 Suit most 60's & 70's Macks 5/8 shaft. (Note: shaft lengths do vary with number of pulleys and front bearing sizes may vary also) WATER PUMP PARTS E9 V Water Pump Kit - 9 Pieces. NOTE: This kit bushes need reaming after fitting Water pump, complete new unit 1, Water pump seal only, suit above kit suit 3/4 shaft 1 5/8 OD LUBERFINER 1008 Engine oil filter Luberfiner. Length15 inches (380mm) diameter 7 1/2 inches (190mm). Suit 675 and other similar build engines E9 EXHAUST 3233 Gasket Exhaust E9. 3.5/8 bolt. Centres 21/2 x 2 1/2 hole..per EACH Page 4 R MODEL-1 AXLE

SECTION 1---- R SERIES MACK PARTS ENGINE E 9 PARTS (CONT) 3234 Oil Ring Turbo Oil Drain 3.

2 1/16 bolt holes 8.45 3237 Turbo gasket. 33.00 3238 Oil Drain Gasket. 1/2 inch hole.

See Rubber Parts in General Section 6G for pricing. 16.

included) as taken off used trucks. See engine parts in next section for pump options. 2,750.

fitted to B & early R Models with power assist optional steering from new 445.

8 SECTION R SERIES MACK PARTS ENGINE E 9 PARTS (CONT) 3234 Oil Ring Turbo Oil Drain Gasket Ring Exhaust - PER EACH Oil Drain Gasket 1 inch hole. 2 1/16 bolt holes Turbo gasket Oil Drain Gasket. 1/2 inch hole. 1 1/2 inch bolt holes DRAG LINK COVERS 303 Drag link leather grease covers with lace - new. See Rubber Parts in General Section 6G for pricing POWER STEERING 316 Original power assist booster type steering kit - Used (note: pump not included) as taken off used trucks. See engine parts in next section for pump options. 2, POWER STEERING PUMP 124 Generator with regulator and power steering drive type and oil pump as fitted to B & early R Models with power assist optional steering from new DRIVE COUPLING 137 Rubber Drive coupling for power steering pump of Generator (as above)..bin POWER STEERING PUMP V8 365 Power Steering pump with drive - suit 864 V8 - Used Page 5 R MODEL-1 AXLE

SECTION 1---- R SERIES MACK PARTS ENGINE E 9 PARTS (CONT) BELT DRIVE 386 Power Steering pump

00 AIR INTAKE FITTINGS 2742 Air hose connector, straight, suit 150 tube.

SEE GENERAL RUBBER SECTION 6G FOR COST & OPTIONS 45.00 2744 Air elbow 90 deg suit 150 tube.

00 ENGINE PLATES 1232 Mack engine exhaust emission control information rocker cover plate.

00 MACK GENERAL MODELS 1628 Workshop Manual - 937 Pages - Early - Covers Models B67-673-70.

U & Flintstone - For Engines END 465 - END 673 - ENDT 673 - ENDT673 & B - END 711 - END 864 -

9 SECTION R SERIES MACK PARTS ENGINE E 9 PARTS (CONT) BELT DRIVE 386 Power Steering pump -Belt drive Power Steering Pump Bracket AIR INTAKE FITTINGS 2742 Air hose connector, straight, suit 150 tube. SEE GENERAL RUBBER SECTION 6G FOR COST & OPTIONS Air elbow 38deg. Suit 150 tube. SEE GENERAL RUBBER SECTION 6G FOR COST & OPTIONS Air elbow 90 deg suit 150 tube. SEE GENERAL RUBBER SECTION 6G FOR COST & OPTIONS ENGINE PLATES 1232 Mack engine exhaust emission control information rocker cover plate. 200mm long x 70mm high MACK GENERAL MODELS 1628 Workshop Manual Pages - Early - Covers Models B Includes Mack C.M.B.F.R.U & Flintstone - For Engines END END ENDT ENDT673 & B - END END ENDT 864. Fuel pump, clutch, gear box, drive shaft, diffs, came with our first new R Model Mack in 1976 MACK R WORKSHOP MANUAL 1629 Workshop Manual - covers R-RD-U & DM models Pages. Chassis, cooling, front axle, steering, springs, & suspension, wheels, brakes, electrical. Cabs. This book came with our first new R model Mack in Page 6 R MODEL-1 AXLE

R MODEL - SECTION 2 BONNETT, JEWELLERY, LATCHES, DOGS etc BONNET LATCH SHORT TYPE - STEEL

bottom pin needs turning for some models - sold per each - catch is extra.

90 3291 R Model black hood catch for above NEW Price Per Each. 25.

Sold per each. Note: Catch is extra. Square tube section 3 1/2 inch x 90mm long 200.

00 MODEL R HOOD LATCH 3294 Model R hood latch socket - NEW not painted. Bin 3293 24.

00 BONNET LATCH - LONG TYPE - FIBREGLASS BONNET 3297 Latch - R Model black fibreglass hood

Square tube section 5 1/2 inch x 140mm long. 70.

80mm long x 13mm wide - Bin 141 22.75 BONNET LATCH RUBBER 3302 Long bonnet latch.

10 R MODEL - SECTION 2 BONNETT, JEWELLERY, LATCHES, DOGS etc BONNET LATCH SHORT TYPE - STEEL BONNET 3290 R Model black hood latch with square body - New - 4 required per truck - Note: bottom pin needs turning for some models - sold per each - catch is extra. Square tube section 3 1/2 inch x 90mm long R Model black hood catch for above NEW Price Per Each OPTIONAL CHROME- SHORT TYPE 3292 Model R chrome hood latch with square body - new. Sold per each. Note: Catch is extra. Square tube section 3 1/2 inch x 90mm long Model R chrome hood latch for above - new. Suit Bin MODEL R HOOD LATCH 3294 Model R hood latch socket - NEW not painted. Bin USED BLACK SHORT TYPE 3295 Used R Model black short square - some rust. Used BONNET LATCH - LONG TYPE - FIBREGLASS BONNET 3297 Latch - R Model black fibreglass hood (bonnet) 8inch (200mm) pin centres. 2 Per Truck. Sold per Each. Square tube section 5 1/2 inch x 140mm long BONNET LATCH SPRING - SHORT TYPE 161 Replacement spring bonnet latch. 80mm long x 13mm wide - Bin BONNET LATCH RUBBER 3302 Long bonnet latch. Suit Superliner 2 and others. Length centre of mounting pin to latch connecting point - 7 inch x 180mm overall length 330mm x 13 inch Short bonnet latch. Also suit battery box and some bonnets. PER EACH. Length centre of mounting pin to latch connecting point 4 3/4 inch x 125mm Page 7 R MODEL-2 BONNET ETC

00 BONNET BADGES GRILLE FRONT LETTER SET 3310 Mack letter set.

Letter size- 5 1/2inch by 3 1/4 inch 98.

11 R MODEL - SECTION 2 BONNETT, JEWELLERY, LATCHES, DOGS etc BONNET WEAR STRAP 3300 Nylon cabin to hood wear strap. R Model. PER EACH BONNET HINGE 3268 Bonnet hinge ball type Bonnet hinge pivot ball type. Suits R Model bonnet mount (with front radiator mtg intercooler) BONNET FLARES 3273 R Model bonnet mudguard flares BONNET BADGES GRILLE FRONT LETTER SET 3310 Mack letter set. Front. Suit R Bonnet (hood). NEW. Letter size- 5 1/2inch by 3 1/4 inch SIDE SCRIPT 3311 Mack script name - side 9inch x 3 inch. NEW. Sold Per Each BONNET BADGES 3318 Econodyne Emblem - suit R Model - not stocked POA 3319 Maxidyne Emblem - suit R Model - not stocked POA 3321 Super liner emblem. Price per Each. NEW HALF DOG 3322 Mack R - Half Dog - 2 per truck. L&R hand...new. Price Per Each Page 8 R MODEL-2 BONNET ETC

00 REPRODUCTION MODEL BADGES 3324 Mack R600 badge.

165.00 3325 Mack R700 Badge, Cast from Brass, Detailed &

Cast from Brass. Detailed & Chromed. 90mmx60x8 thick. 165.

Price subject to quality & stock. Priced on condition. 1,000.

surround POA GRILLE MOULDING 3306 Grille surround moulding -

12 R MODEL - SECTION 2 BONNETT, JEWELLERY, LATCHES, DOGS etc BONNET BADGES LATE MACK DOG 3307 Late Mack Short Eared Dog. Standard bonnet size...new DOG BASE 3308 R Model base for Bulldog - chromed.new REPRODUCTION MODEL BADGES 3324 Mack R600 badge.cast from Brass, Detailed & Chromed - length 210mm (8 1/4 inch) Mack R700 Badge, Cast from Brass, Detailed & Chromed. Length 210mm (8 1/4 inch) Mack F700 Badge. Cast from Brass, Detailed & Chromed. Length 210mm (8 1/4 inch) Mack R800 badge. Cast from brass. Detailed & Chromed. Length 210mm (8 1/4 inch) V8 Side Badge. Cast from Brass. Detailed & Chromed. 90mmx60x8 thick GRILLE 3303 Grille - Suit R & F - Used and Reconditioned. Price subject to quality & stock. Priced on condition. 1, FIBREGLASS GRILLE MOUNTING 3304 New fibreglass mounting surround POA GRILLE MOULDING 3306 Grille surround moulding - black, in 2 sections New Headlamp Assembly 12V. Fits most Macks with single round headlight also other model trucks & cars. Supplied with lens body and lead ready for fitting Page 9 R MODEL-2 BONNET ETC

R MODEL - SECTION 2 BONNETT, JEWELLERY, LATCHES, DOGS etc 3314 Headlamp Gasket for 3313 light assembly. 11.

Size rear ID 210mm front ID. 185mmx30mm deep. Sold Per each. 103.00 BONNET BADGES 3316 Headlight Trim.

NOTE: This type has only 2 bolt holes and is a wee bit smaller than the 6 hole one. 99.

00 3333 Dual headlight bezel. Suit Superliner. 1 3/8 (35mm) with mounting screws PRICE PER EACH 130.

00 3339 Complete oblong head light assembly LH. (see part no 3332 for chrome bezel) 229.

See Electrical in General Section 6E for pricing.

13 R MODEL - SECTION 2 BONNETT, JEWELLERY, LATCHES, DOGS etc 3314 Headlamp Gasket for 3313 light assembly Chrome head light bezel. Suits steel style fronts, R also DM, Valueliner and Flintstone & B80 & 81 Tylden JR ute. Size rear ID 210mm front ID. 185mmx30mm deep. Sold Per each BONNET BADGES 3316 Headlight Trim. New Stainless steel 16 5/8 long x 9 1/4 high. 7 3/8 inch hole. Price Per Each. NOTE: This type has only 2 bolt holes and is a wee bit smaller than the 6 hole one HEADLIGHT BEZEL 3332 Duel headlight bezel. Suit Superliner. 1 3/4 (45mm) deep with mounting screws. PRICE PER EACH Dual headlight bezel. Suit Superliner. 1 3/8 (35mm) with mounting screws PRICE PER EACH HEADLIGHT ASSEMBLY 3338 Complete oblong head light assembly RH (see part no 3332 for chrome bezel) Complete oblong head light assembly LH. (see part no 3332 for chrome bezel) BLINKER (INDICATOR) LIGHTS 3335 R Model side hood blinker lamp assembly. - Amber with wiring. See Electrical in General Section 6E for pricing R Model double side square LED hood top mounting blinker lamp includes wiring tail.. (see Electrical in General Section 6E for pricing). NOTE: This light has side lamp so 3335 above would not be necessary. PARK LIGHTS 3336 Lamp Marker Park Light Assembly, clear with wiring. See General Section 6E for Pricing Parking light lens only - clear or amber for above & Page 10 R MODEL-2 BONNET ETC

14 R MODEL - SECTION 2 BONNETT, JEWELLERY, LATCHES, DOGS etc FRONT MUDFLAP 3340.Mudflap bonnet LH & RH R Model black with brass eyelets, not Valveliner. See Rubber Parts in General Section for pricing and options. BONNET (HOOD) WEBBING 2692 Suit Flintstone etc. - See Rubber in General Section 6G for Pricing and Options. Page 11 R MODEL-2 BONNET ETC

R MODEL - SECTION 3 - CABIN INTERIOR WESTERN TRIM 3345 Tylden offer a full R Model Western Trim package

buttons. Available in brown, cream, grey, magnum (red), or colour of your choice.

Hood Lining (Part No 3350). NOTE: ALL PRICES SHOWN ARE FOR UPHOLSTERY ONLY.

00 3356 R Model door arm rest, included with 3348 OR Price Per Each. Ask us to email better photos. 25.

Ask us to email better quality photos. 475.00 3350 R Model roof head lining in perforated vinyl.

3345 PACKAGE ABOVE PRICES ROOF CONSOLE 3351 R Model front roof console 160.

15 R MODEL - SECTION 3 - CABIN INTERIOR WESTERN TRIM 3345 Tylden offer a full R Model Western Trim package as per factory with large facing dogs or diamonds hot welded into material or optional stitched with buttons. Available in brown, cream, grey, magnum (red), or colour of your choice. Western Trim including 2 seats (part No 3347), 2 Door trims (Part No 3348), Rear Cab (Part No 3349) and Hood Lining (Part No 3350). NOTE: ALL PRICES SHOWN ARE FOR UPHOLSTERY ONLY Bucket Seats, original perforated vinyl with Mack Logo stamp (as original) Price Per Each. Ask us to better photos. 2, R Model Western door trim with welded dog logo. Original welded patterns or stitched with buttons. Price Per Each. Ask us to better photos R Model door arm rest, included with 3348 OR Price Per Each. Ask us to better photos R Model rear Western original pattern cab lining in perforated vinyl. Ask us to better quality photos R Model roof head lining in perforated vinyl. Ask us to better quality photos FOLLOWING NOT INCLUDED IN PART NO PACKAGE ABOVE PRICES ROOF CONSOLE 3351 R Model front roof console FLOOR CONSOLE 3352 R Model centre floor console in vinyl and carpet - trim only. NOTE: Photos shows a special one ALL NEW FLOOR CONSOLE 3357 Complete new centre console, 390mm long x 300mm deep x 280mm wide, folded from S/S with hinged marine ply. Lid covered in vinyl with carpet kick strip on bottom with stamped dog logo in lid Stainless steel centre console base, 390mm x300mm deep x 280 wide. POA NEW PRODUCT Page 12 R MODEL-3 CABIN INTERIOR

R MODEL - SECTION 3 - CABIN INTERIOR HATCH SURROUND 3353 R Model hatch surround 55.

00 DOG STAMP 3365 Stamp your material with original dog type stamp PRICE PER EACH. 45.

See door for nut option..bin 3540 3.00 3519 Nut dash and door trim. Bin 3540. 3.00 ENGINE STOP CABLE 3359 R Model engine stop cable.

00 STANDARD MATCHING GAUGES SUIT R & B MACK SPEEDO 3367 Speedo gauge.

16 R MODEL - SECTION 3 - CABIN INTERIOR HATCH SURROUND 3353 R Model hatch surround DOOR PILLAR 3354 R Model Side front pillar trims - L & R DOG STAMP 3365 Stamp your material with original dog type stamp PRICE PER EACH DASH 3412 Dash - new. Made from fibreglass Dash Panel Screw. See door for nut option..bin Nut dash and door trim. Bin ENGINE STOP CABLE 3359 R Model engine stop cable HAND TROTTLE CABLE 3360 R Model throttle cable STANDARD MATCHING GAUGES SUIT R & B MACK SPEEDO 3367 Speedo gauge kmh cable 3 1/4 diam R Model speedo cable with 2 types of adaptors -112 Length 3050mm Page 13 R MODEL-3 CABIN INTERIOR

R MODEL - SECTION 3 - CABIN INTERIOR TACHO 3369 Tacho gauge.

00 3370 R Model Tacho cable with 3 types of adaptors.

00 MECHANICAL OIL PRESSURE GAUGE 3372 Oil pressure gauge.

00 LOW OIL PRESSURE SWITCH 3373 Low oil pressure warning

00 OIL TEMPERATURE GAUGE 3378 Gauge - Oil Temp.

00 3379 Gauge - Oil Temperature Sender for 3378.

00 VOLT METER 3377 Gauge Volt 12V 10 to 16amps battery

17 R MODEL - SECTION 3 - CABIN INTERIOR TACHO 3369 Tacho gauge. Zero to 3200 RPM with built in hour meter. 3 1/4 inch R Model Tacho cable with 3 types of adaptors. 2250mm long MECHANICAL OIL PRESSURE GAUGE 3372 Oil pressure gauge PSI mechanical. Suit 2 inch hole mounting LOW OIL PRESSURE SWITCH 3373 Low oil pressure warning engine switch OIL TEMPERATURE GAUGE 3378 Gauge - Oil Temp. Transmission & Diff. Bin Gauge - Oil Temperature Sender for Transmission & Diff VOLT METER 3377 Gauge Volt 12V 10 to 16amps battery condition and charge section WATER TEMPERATURE GAUGE 3380 Gauge - Water Temp Neg Fahrenheit Gauge - Water Temperture Sender Unit. Negative Ground. Bin AIR PRESSURE GAUGE 3386 Gauge - Air Pressure PSI Dual needle Page 14 R MODEL-3 CABIN INTERIOR

R MODEL - SECTION 3 - CABIN INTERIOR FUEL GAUGE 3387 Fuel Gauge 105.

250ohm empty 1020ohm half full & 31ohm full. 81.

0 to 3200 RPM with engine hours. Cable operated. Suit 85mm diam hole. 178.

00 3383-8 R Series indicator stalk. - 8 Wires 104.

00 LOCK SET IGNITION & DOOR 856 Lock Kit Ignition and door lock R 7 F Bin 88 76.

18 R MODEL - SECTION 3 - CABIN INTERIOR FUEL GAUGE 3387 Fuel Gauge Sender Fuel Gauge R & F multi volt. Suit tank 6-24 inch deep. Suit Pal & Mack gauges. 250ohm empty 1020ohm half full & 31ohm full TACKO WITH MACK LOGO 1030 Tachometer head - black face with Mack logo. 0 to 3200 RPM with engine hours. Cable operated. Suit 85mm diam hole INDICATOR STALK - TURN SIGNAL 771 R Series indicator stalk - 7 wires R Series indicator stalk. - 8 Wires DIP SWITCH 3389 R Series dip switch with long leg. Bin LOCK SET IGNITION & DOOR 856 Lock Kit Ignition and door lock R 7 F Bin CUSTOM HORN BUTTON LOGO 1258 Custom horn button logo with your Custom details. Mounted on S/S plate for easy mounting on your horn button. See Stickers in General Section for Pricing FRONT FLOOR MAT 3391 R Model front floor mat - moulded rubber ribbed with Mack logo & wear section on LH side Page 15 R MODEL-3 CABIN INTERIOR

R MODEL - SECTION 3 - CABIN INTERIOR REAR FLOOR MAT 3392 R Model rear floor under seat mat - moulded ribbed rubber

00 R MODEL CLUTCH PEDAL 3406 R Model clutch pedal & bracket clutch type.

Photo shows insulation in B Model. - Used 230.

00 3403 Suit Trident, Titan, VL S/L, 138" (3480mm) long 220.

19 R MODEL - SECTION 3 - CABIN INTERIOR REAR FLOOR MAT 3392 R Model rear floor under seat mat - moulded ribbed rubber R Model plain floor mat (no ribs etc) supplied in one section. LOOSE FLOOR MAT 2771 Floor mat - loose with dog logo with cut out for peddles. Sold as Pair. The second (passenger side) one is square R MODEL CLUTCH PEDAL 3406 R Model clutch pedal & bracket clutch type. Generally stocked to change from old through floor pedal type to pendulum type with cable. Photo shows insulation in B Model. - Used CLUTCH CABLE 3404 Suit R600 & Valveliner 109" (2770mm) 112" (2850mm) tip to tip Suit Trident, Titan, VL S/L, 138" (3480mm) long GEAR SHIFT BOOT 2869 Gear shift boot - rubber - 180mm long x 100mm wide x 70mm high. See General Section 6G for pricing 2868 Stainless steel surround Cover for boot See General Section Rubber for Pricing Steering Column gear shift boot and rubber - 222mm long x 135mm wide x 70 high.see General Section 6G for pricing CLUTCH RUBBER 2482 Clutch pedal - rubber replacement pad, also fits B Model. See General Section 6G for pricing. Page 16 R MODEL-3 CABIN INTERIOR

R MODEL - SECTION 3 - CABIN INTERIOR R MODEL FOOT VALVE PEDAL

80 KICK PLATES 3415 R Door entry aluminium kick plates POA

POA 3408 Oblong heater duct vents - suit R Model POA MACK AIR

20 R MODEL - SECTION 3 - CABIN INTERIOR R MODEL FOOT VALVE PEDAL 3074 New brake pedal with Mack logo. Note holes are not drilled. See General Section for other brake options THROTTLE PEDAL 361 R Model fuel pedal only with Mack logo - New. Price Per Each KICK PLATES 3415 R Door entry aluminium kick plates POA 3414 R Model Entry Kick Plate. Custom Polished Stainless Steel. POA HEATER DUCT 3407 Round heater duct vents - suit R Model POA 3408 Oblong heater duct vents - suit R Model POA MACK AIR ACTUATORY 3405 Mack red dot part no 4379-RD suit Mack CHR 1992 to about Used to open and close air vent shutters DRIVER INSTRUCTION STICKERS SEE GENERAL SECTION - 6J FOR OPTIONS Page 17 R MODEL-3 CABIN INTERIOR

SECTION 4 - R MODEL CABIN EXTERIOR WINDSCREEN GLASS 3416

00 3417 Windscreen glass RHR, suit R, valve, super,

00 WINDSCREEN RUBBER 3418 Windscreen rubber - complete

00 WIPER BLADE 3497 Windscreen wiper blade. R Model.

00 3495 LH wiper arm with inbuilt concealed windshield

00 3496 RH Wiper arm with inbuilt concealed windshield

00 WINDSCREEN BOTTLE 3499 Reservoir windscreen washer

70 REAR WINDOW 3430 R Model rear window - laminated.

21 SECTION 4 - R MODEL CABIN EXTERIOR WINDSCREEN GLASS 3416 Windscreen glass LHR, suit R. valve, super, metro Windscreen glass RHR, suit R, valve, super, metro WINDSCREEN RUBBER 3418 Windscreen rubber - complete both sides ROOF VENT SEAL 3420 Roof Vent Seal WIPER BLADE 3497 Windscreen wiper blade. R Model. 16 inch LH wiper arm with inbuilt concealed windshield washer nozzles & two knurled drive options RH Wiper arm with inbuilt concealed windshield washer nozzle and two knurled drive options WINDSCREEN BOTTLE 3499 Reservoir windscreen washer bottle & pump. R model door REAR WINDOW 3430 R Model rear window - laminated. Tinted Std. Auto glass Rear window rubber seal CABIN INSULATOR 3434 Cab insulator R cabin. Also R fuel tanks. 3 3/4 in long x 2 5/8 diam x 1 1/2 hole Page 18 R MODEL-4 CABIN EXTERIOR

SECTION 4 - R MODEL CABIN EXTERIOR GRAB ENTRY HANDLE 3437 Grab entry handles.

00 AIR CLEANER HAT 3461 Air cleaner hat - black plastic 15in x 3 1/2 plus sprigit

00 CAB LEVELLING VALVE 3467 Valve cab levelling suit R Model + T401 Kw. 148.

Max inflation 100 PSI. Max Torque 15ft lbs. Length 5 1/4 inch.

42 FIREWALL PLATE 1235 Firewall certification plate (See General Section 6I for

CABIN BULLET LIGHTS 3444 Bullet type roof lights 390mm long x 90mm diam, supplied

3445 Bullet short centre light. 200mm long x 90mm diam. Price Per Each.

22 SECTION 4 - R MODEL CABIN EXTERIOR GRAB ENTRY HANDLE 3437 Grab entry handles. 23 long. Price Per Each AIR HORN 3439 Horn - Air - round trumpet kit AIR CLEANER HAT 3461 Air cleaner hat - black plastic 15in x 3 1/2 plus sprigit extra 1 1/2 ins rain CAB LEVELLING VALVE 3467 Valve cab levelling suit R Model + T401 Kw CABIN SUPER CUSHION AIR BAG 3468 Cabin rear air spring bag. Max inflation 100 PSI. Max Torque 15ft lbs. Length 5 1/4 inch. Diameter at big end - 3 1/2 inch FIREWALL PLATE 1235 Firewall certification plate (See General Section 6I for pricing). CABIN BULLET LIGHTS 3444 Bullet type roof lights 390mm long x 90mm diam, supplied with mounting bolts. See General Electrical Section 6E for pricing and options Bullet short centre light. 200mm long x 90mm diam. Price Per Each. See General Electrical Section 6E for pricing and options. FRONT VENT OPENER 901 Optional front vent opener. Can be adapted to suit without a lot of modification. 155mm closed 205mm open. Max load 125kg. Travel speed 6mm per second. Has inbuilt limit switches supplied with 12V switch Page 19 R MODEL-4 CABIN EXTERIOR

SECTION 5 - R MODEL - DOORS 3500 Door shell - R Model - new Left - suits 79

Sit 79 onwards door locks. 990.00 3503 Door - R Model - Used.

DOOR INNER PANEL 3506 Door inner panel RH late bare - NEW 210.

3.00 DOOR HANDLE 3523 R door handle. Outer R & F model cb. 79.

23 SECTION 5 - R MODEL - DOORS 3500 Door shell - R Model - new Left - suits 79 onwards door locks Door shell - R Model. New right. Sit 79 onwards door locks Door - R Model - Used. Ask re condition & price. Shell or complete. DOOR INNER PANEL 3506 Door inner panel RH late bare - NEW Door panel screws. Price Per Each Door Panel 1/4 in thread DOOR HANDLE 3523 R door handle. Outer R & F model cb R door handle inner R & F pre 79 NOTE: Part no below has better clearance R Model door handle - inner R & F after 1979 with thicker trim. NOTE: Later type, fits pre 79 door if you need better clearance R Model door pull handle. Suit R, RB, RD, DM, MC, MR & LE. Page 20 R MODEL-5 DOORS

SECTION 5 - R MODEL - DOORS DOOR HANDLE ESCUTCHEON 3526 Handle escutcheon.

Suit door and window crank handle. Bin 3526. 2.

248.00 3529 Vent window flipper RH. (Quarter Vent). Suit models R & F 248.

Note: We supply 6mm green tinted toughened auto glass. 102.

Suit early R style cabs. 159.00 90 Window regulator scissors - Right.

24 SECTION 5 - R MODEL - DOORS DOOR HANDLE ESCUTCHEON 3526 Handle escutcheon. Suit door and window crank handle Pin Handle window & door. Suit door and window crank handle. Bin QUARTER VENT WINDOW 3528 Vent window flipper LH. (Quarter Vent), Suit models R & F Vent window flipper RH. (Quarter Vent). Suit models R & F R MODEL DOOR GLASS 3530 Door glass R & L. Note: We supply 6mm green tinted toughened auto glass R MODEL EARLY WINDOW REGULATOR 89 Window regulator scissors - Left. Suit early R style cabs Window regulator scissors - Right. Suit early R style cabs R MODEL EARLY REGULATOR GEAR PLATE 91 Gear plate for passenger side door regulator. Suit early style cabs Gear plate for driver side door regulator. Suit early styled cabs PLEASE NOTE: DOOR PART CHANGES IN 1979 AND 1983, Page 21 R MODEL-5 DOORS

SECTION 5 - R MODEL - DOORS EARLY SIDE GLASS SUPPORT CHANNEL 3535 Support channel for door glass regulator for passenger side roll

50 3536 Support channel for door glass regulator for driver side roll up window glass 400mm long 53.

(Later model - post 83). 138.00 3540 Retaining ring for regulator to glass support track. Price Per Each. (Suit 3538 & 3539) 3.

00 LATE MODEL WINDOW SUPPORT 3535 Support window RH model. Used with Part 3538-450mm long. 89.00 3536 Support window LH model.

25 SECTION 5 - R MODEL - DOORS EARLY SIDE GLASS SUPPORT CHANNEL 3535 Support channel for door glass regulator for passenger side roll up window glass 400mm long. Used with Part 89 & Support channel for door glass regulator for driver side roll up window glass 400mm long LATE MODEL WINDOW REGULATOR 3538 Regulator assembly LH. (Later model - post 83) Regulator assembly RH. (Later model - post 83) Retaining ring for regulator to glass support track. Price Per Each. (Suit 3538 & 3539) Linkage remote door. Connects handle to door lock. Used with part No 3538 & LATE MODEL WINDOW SUPPORT 3535 Support window RH model. Used with Part mm long Support window LH model. Used with Part mm long WINDOW REGULATOR HANDLE 3525 Window regulator handle, early R&F. See part no 3526 & 3527 for escutcheon & pin..page 2. Note Part No 3531 below has more clearance Window regulator handle. Suit doors with Western Trim or worn Shafts Page 22 R MODEL-5 DOORS

SECTION 5 - R MODEL - DOORS DOOR LATCH EARLY TO 1979 3553 Latch door early RH, suit R & F, MIR, MBR 265.00 3554 Latch door - early LH.

Mack current style DM, R, RB, RD. 84.00 3543 Latch door- late LH. Used with part no. 3545. Mack current style DM, R, RB, RD. 84.00 DOOR LATCH SCREWS 3517 Door latch holding screws.

148.00 3556 Striker Plate - LH. Mack early style R, RB, RD, DM. 148.00 3559 Striker Plate RH - used with part no. 3560.

26 SECTION 5 - R MODEL - DOORS DOOR LATCH EARLY TO Latch door early RH, suit R & F, MIR, MBR Latch door - early LH. Suit R & F, MIR, MBR DOOR LATCH AFTER 1979 R & F 3542 Latch door late RH. Used with part no Mack current style DM, R, RB, RD Latch door- late LH. Used with part no Mack current style DM, R, RB, RD DOOR LATCH SCREWS 3517 Door latch holding screws. 3 Per Door - 1/4 inch. PRICE PER EACH... B DOOR STRIKER - EARLY R & F 3555 Striker Plate - RH. Mack early style R, RB, RD, DM Striker Plate - LH. Mack early style R, RB, RD, DM Striker Plate RH - used with part no Mack current style R, RB, RD, DM Striker Plate LH. used with part no Mack current style R, RB, RD, DM Page 23 R MODEL-5 DOORS

SECTION 5 -R MODEL - DOORS KEY DOOR LOCKS 856 Door & ignition lock set, includes 2 door tumblers and one ignition tumbler with 2 matching keys. New.

Slides from outside inner door to hold door lock in place. - New 11.50 BAILEY CHANNEL 3549 Channel Bailey R&F. 2 per door. Price Per Each.

- 2 required per door L & R. Price Per Each.see Rubber Parts in General Section for Pricing. SPECIAL DOOR SEAL 3558 Rubber super soft hollow door seal.

See Rubber Parts in General Section for Pricing. MIRROR ARMS 3575 Kit mirror bracket RH stainless. 204.00 3576 Kit mirror bracket LH stainless. 204.00 MIRROR HEAD 3577 Mirror head-mack.

27 SECTION 5 -R MODEL - DOORS KEY DOOR LOCKS 856 Door & ignition lock set, includes 2 door tumblers and one ignition tumbler with 2 matching keys. New. SEE GENERAL SECTION 6E FOR PRICING Bin 88 DOOR LOCK RETAINER CLIP 88 Door lock slide in retainer clip. Slides from outside inner door to hold door lock in place. - New BAILEY CHANNEL 3549 Channel Bailey R&F. 2 per door. Price Per Each. Supplied with 5 clips. See Rubber Parts in General Section for Pricing. WINDOW WEATHER STRIP 3550 Weather strip R & F model door glass sqeegee guides.- 2 required per door L & R. Price Per Each.see Rubber Parts in General Section for Pricing. SPECIAL DOOR SEAL 3558 Rubber super soft hollow door seal. Adhesive backing. Fits in cabin door, closes against it.. 13mm wide 18mm high, sold in a 4.5m (15ft) length. See Rubber Parts in General Section for Pricing. MIRROR ARMS 3575 Kit mirror bracket RH stainless Kit mirror bracket LH stainless MIRROR HEAD 3577 Mirror head-mack. LH alloy type with bulldog but no heating or light. See 803 General Electrical Section for light in photo Mirror head-mack. LH alloy type with bulldog but no heating or light Page 24 R MODEL-5 DOORS

TYLDEN HERITAGE R MODEL MACK MAIL ORDER PARTS CATALOGUE

1956 Mack LTL Diesel TYLDEN HERITAGE R MODEL MACK MAIL ORDER PARTS CATALOGUE Custom Classic Truck & Tractor Restorations Business Hours: 0428 507 408 Location: 1906 Trentham Road, Kyneton Vic 3444 Australia