PROCESS LINE - PICKLING LINE

Transcription

1 PROCESS LINE - PICKLING LINE POSCO E&C demonstrates its own technology by performing POSCO-ASSAN TST STS CAPL project with capacity of 300 thousand tons per annum including high speed jet pickling technology reaching 120 mpm. POSCO NO.1 STAINLESS HAPL, (REVAMPING) *) ON-GOING C 600,000 T/Y 2014* POSCO NO.1 STAINLESS CAPL, (REVAMPING) C 175,000 T/Y 2014* POSCO-ASSAN TST, STAINLESS CAPL, IZMIT, TURKEY 300,000 T/Y 2013 POSCO VST, STAINLESS CAPL, HOCHIMIN, VIETNAM 220,000 T/Y 2012 POSCO-ASSAN TST STS CAPL 300,000 T/Y POSCO, STAINLESS CAPL, C 400,000 T/Y 2009 STAINLESS COLD COIL IZMIT, TURKEY PERIOD S ~ JUL ZPSS, STAINLESS HAPL, ZHANGJIAGANG, CHINA POSCO NO.3 STAINLESS HAPL, CM 695,000 T/Y 2006 C 474,000 T/Y 2003

2 PROCESS LINE - ANNEALING LINE POSCO E&C capable of providing high quality annealing line facility through it s home grown technology providing energy saving, efficiency, heat balance & speed map advantages as value addition. POSCO MAHARASHTRA NO.1 CAL, C 1,000,000 T/Y 2014 POSCO MAHARASHTR CAL 1,000,000 T/Y ANNEALED COIL COIL PERIOD MAY ~ FEB C POSCO-VIETNAM NO.1 CAL, VUNGTAO, VIETNAM POSCO NO.1 CAL (REVAMPING), POSCO NO.2 CAL (REVAMPING), POSCO NO.3 CAL (REVAMPING), POSCO NO.1,2 CAL KWANGYANG, KOREA C 700,000 T/Y 2009 C 300,000 T/Y 2005 C 300,000 T/Y 2005 C 1,000,000 T/Y 2003 C 1,800,000 T/Y 1997

3 PROCESS LINE - COLD ROLLING MILL Successful experience from Cold Rolling Mill complex project in Korea as well as Vietnam and India has enhanced the reliability of its stable operation through POSCO E&C s optimized engineering. *) ON-GOING CSS, NO.1 CRM, BRAZIL C 600,000 T/Y 2017* POSCO MAHARASHTRA, NO.1 CRM, INDIA C 1,800,000 T/Y 2014* ASSAN TST, STAINLESS ZRM, TURKEY 300,000 T/Y 2013 POSCO VST, STS CRM, VIETNAM C 100,000 T/Y 2012 POSCO VIETNAM CRM, VIETNAM C 1,200,000 T/Y 2009 POSCO MAHARASHTRA-NO.1 CRM QPSS, STAINLESS ZRM, QINGDAO, CHINA CM 150,000 T/Y ,800,000 T/Y COLD ROLLED S PERIOD MAY ~ JUN C NO.2 STAINLESS ZRM, ZPSS ZHANGJIAGANG, CHINA POSCO NO.2 CRM (CAL,CAL REVAMPING), CM 140,000 T/Y ,225,000 T/Y 2003

4 PROCESS LINE - COLD ROLLING MILL ZPSS NO.1 STAINLESS CR PLANT, ZHANGJIAGANG, CHINA CM 140,000 T/Y 1999 POSCO NO.1 CR MILL (REVAMPING), C 1,100,000 T/Y 1999 POSCO NO.2 CR MILL (POL), GWANGYANG, KOREA C 500,000 T/Y 1997 POSCO NO.4 CR MILL, GWANGYANG, KOREA C 1,800,000 T/Y 1997

5 PROCESS LINE - GALVANIZING LINE Our history of galvanizing in POSCO group and abroad, more than 20 hot dip galvanizing lines are operational throughout the world with satisfied customers successfully producing galvanized sheets, galvanneal sheets, 55%Al-Zn coated sheets and 90%Al coated sheets. POSCO NO.2 CGL, ALTAMIRA, MEXICO C 500,000 T/Y 2013 POSCO CGL, GUANGDONG, CHINA C 450,000 T/Y 2012 POSCO CGL, C 450,000 T/Y 2012 UNION STEEL, NO.5 CGL, BUSAN, KOREA 370,000 T/Y 2009 PROSPERITY PGL, KAOSHIUNG, TAIWAN 500,000 T/Y 2009 POSCO MAHARASHTRA CGL 450,000 T/Y POSCO NO.2 CGL REVAMPING, GWANGYANG, KOREA C 430,000 T/Y 2008 EXTERIOR PANEL OF HIGH END AUTOMOBILES PERIOD JAN ~ MAY C POSCO NO.6 CGL, GWANGYANG, KOREA POSCO NO.1 CGL REVAMPING GWANGYANG, KOREA C 400,000 T/Y 2006 C 300,000 T/Y 2006

6 PROCESS LINE - GALVANIZING LINE GENERAL TRADE CGL, THAI BINH, VIETNAM 30,000 T/Y 2005 POSCO NO.5 CGL, GWANGYANG, KOREA C 450,000 T/Y 2005 PROSPERITY CGL, KAOSHIUNG, TAIWAN 200,000 T/Y 2005 SINO LEADING NO.1&2 CGL, CHANGSHU, CHINA 250,000 T/Y X 2 LINES 2005 POSCO NO.2 CGL, C 300,000 T/Y 2004 KISCO CGL, KUNMING, CHINA 150,000 T/Y 2004 NAKISCO CGL, HOCHIMINH, VIETNAM 30,000 T/Y 2004 PCCS CGL (REVAMPING), DALIAN, CHINA 150,000 T/Y 2004 POSCO PGL (REVAMPING), GWANGYANG, KOREA C 580,000 T/Y 2002 POSCO NO.1 CGL (REVAMPING), C 200,000 T/Y 2000 POSCO NO.4 CGL, GWANGYANG, KOREA C 450,000 T/Y 2000 MPSC CGL, YANGON, MYANMAR 30,000 T/Y 1998 ZPSS CGL, ZHANGJIAGANG, CHINA CM 100,000 T/Y 1998 DONGKUK HGL, 150,000 T/Y 1997

7 PROCESS LINE - COLOR COATING LINE POSCO E&C has rich technology and experiences on CCL, propose to provide highly efficient equipment and services including design, manufacturing, supply and test run. We can give you increasing of productivity by eliminating time loss. ASSAN GALVANIZ, CCL, ISTANBUL, TURKEY 120,000 T/Y 2014 PROSPERITY CCL, TAIWAN 200,000 T/Y 2009 HADEED CCL, KSA C 120,000 T/Y 2007 GENERAL TRADE CCL, VIETNAM POSCO C&C NO.2 CCL REVAMPING, KOREA 50,000 T/Y 2005 C 150,000 T/Y 2005 ASSAN COLOR COATING LINE 120,000 T/Y PCM (PRE-COATED METAL) HANDAN NO.1, 2 CCL, CHINA 100,000 T/Y X 2 LINE 2005 KISCO CCL, CHINA 100,000 T/Y 2004 TURKEY PERIOD DEC ~ MAY NAKISCO CCL, VIETNAM 20,000 T/Y 2004 PCCS NO.2 CCL, CHINA 100,000 T/Y 2003

8 PROCESS LINE - COLOR COATING LINE SHUNPO MULTI COATING LINE, SHUNDE, CHINA NO: 100,000 T/Y COLOR: 50,000 T/Y 2003 POSVINA CCL, HOCHIMINH, VIETNAM 22,000 T/Y 2002 HAIER CCL, CHINA 70,000 T/Y 2001 POSCO C&C NO.1 CCL REVAMPING, CM 100,000 T/Y 1999 PCCS NO.1 CCL, DALIAN, CHINA CM 50,000 T/Y 1998

9 PROCESS LINE - ELECTRICAL STEEL LINE POSCO E&C, having rich technology and experiences on ESL, propose to provide highly efficient equipment and services including design, manufacturing, supply and test run. We can help you achieve higher productivity by eliminating time loss. POSCO MAHARASHTRA ACL 300,000 T/Y NO THICKNESS : 0.35MM ~ 0.70MM WIDTH : 900MM ~ 1,280MM PERIOD MAY ~ AUG POSCO MAHARASHTRA ACL, SHUNPO ACL, SHUNDE, CHINA POSCO NO.3 HCL, POSCO NO.3 DCNL, POSCO NO.3 COF, POSCO NO.3 APL POSCO NO.2 COF POSCO NO.2 HCL (REVAMPING), POSCO NO.3 ACL (REVAMPING) C 300,000 T/Y 2013 C 1,500,000 T/Y 2010 C 850,000 T/Y 2009 C 900,000 T/Y 2009 C 1,000,000 T/Y 2009 C 3,690,000 T/Y 2009 C 820,000 T/Y 2006 C 1,640,000 T/Y 2006 C 3,430,000 T/Y 2006

10 PROCESS LINE - ELECTRICAL STEEL LINE POSCO, NO.2 DCNL REVAMPING, C 18,000 T/Y 2006 POSCO, APL, C 341,000 T/Y 2005 POSCO, NO.1 COF, C 82,000 T/Y 2004 POSCO, NO.1 ETL REVAMPING, C 250,000 T/Y 2002 POSCO, NO.2 ACL, C 220,000 T/Y 1998