Construction Controls Quick Selection Guide

Transcription

1 Construction Controls Quick Selection Guide 30,000 products covering commercial projects Siemens NEMA starters, lighting contactors and pilot devices are known for their dependability and ruggedness, and now they are delivered faster than ever before. Siemens puts many of the most popular products in our customers hands faster, because we stock more products across our entire product line. Our Class 11 and 14 NEMA starters, LC and LE lighting contactors and 30mm pilot devices are now available for immediate or next day shipping. In addition, thousands of our enclosed starters are now builtto-order and shipped in 1-3 days. We are committed to making your job easier by stocking more products, offering more configurations, expediting factory modifications and delivering industry leading turnaround times on our most requested control technologies. See the Industry Mall for the official list of products that are returnable under the standard Siemens return policy. Ready when you are The following Class 11 and 14 starters and LC and LE lighting contactors are maintained in stock at our facility and are available for same day or next day shipping (based on the time of day when the order is received) to customers throughout North America. Lead times apply to orders of up to six units of either the Class 14, LC, or LE. Please be sure to contact customer service at for lead times of larger order volumes. Products Offered: Lighting & Heating Contactors Open and Enclosed Motor Starters Manual Motor Starters Pilot Devices Pilot Device Stations usa.siemens.com/construction-controls

2 Construction controls at the speed you need Table of Contents Manual Control Starters Class MMS 3 Class SMF 4 Heater Elements, Class SMF 5 Class 11 6 Enclosed Class 14 NEMA Starters 7 Faster delivery on over 2,000 8 non-stock Enclosed Starters Combination Class 17 Starters with 9 factory modifications Lighting Contactors 10 Pushbutton Stations Class 50 Normal Duty 11 Class 52 Harsh Duty mm Pilot Device 13 Class 52 convenience packs

3 Manual Control Switches, Class MMS Class MMS Class MMS motor starting switches provide manual ON-OFF control of single or three phase AC motors where overload protection is not required or is provided separately. Compact construction and a 600 volt rating make these switches suitable for a wide range of industrial and commercial uses. Typical applications include small machine tools, pumps, fans, conveyors and many other types of electrical machinery. They can also be used on non-motor loads such as resistance heating applications. Continuous Current Rating 30 amperes at 250 volts max, 26.4 amperes at 277 volts, 20 amperes at 600 volts max, 30 amperes resistive at 600 volts max. Accessories Class MMS Description Handle guard kit with padlock provision Catalog Number SMFFL1 Class MMS Switch in a NEMA Type 1 Enclosure Starter Class MMS, Single Phase and 3-Phase Type of Operator Toggle No of Poles 2 3 Starter Features Open Type NEMA Type 1 General Purpose enclosure, surface mounting NEMA Type 4 watertight, dust-tight, metallic enclosure Catalog Number Catalog Number Catalog Number Standard MMSK01 MMSKG1 MMSKW1 Red Pilot Light 115V AC MMSK01A 1 MMSKG1A MMSKW1A Standard MMSK02 MMSKG2 MMSKW2 Red Pilot Light V AC MMSK02B 1 MMSKG2B MMSKW2B 1 Do not use as replacement interiors for NEMA Type 4 metallic enclosures. For replacement unit, order Type MMSK01 or MMSK02 and separate pilot light kit. 3

4 Manual Control Fractional HP starters, Class SMF Class SMF Class SMF fractional horsepower starters provide overload protection as well as manual on-off control for small horsepower motors in a variety of industrial and commercial applications. Available in one or two pole versions, these devices are suitable for use with AC single phase motors up to 1 HP. Two pole starters can also be used with DC motors up to 3 4 HP. Typical applications include fans, conveyors, pumps and small machine tools. Continuous Current Rating 16 amperes Overload Trip Assembly Motor protection is provided by a Class SMFH heater element which must be installed before the starter will operate. Enclosures Class SMF, NEMA Type 1 surface mounting enclosures are sheet steel with a thermo-plastic wrap-around cover for convenience in wiring. A zinc alloy die casting is used for NEMA Type 4 enclosures. Mounting Open types without a pilot light fit standard single gang switch boxes, and can be used with any cover plate having a standard toggle cutout. Class SMF Starter in a NEMA Type 1 Enclosure without Pilot Light Maximum horsepower AC Single phase DC Volts 1-Pole 2-Pole 2-Pole Accessories Class SMF Description Catalog Number Handle guard kit with padlock provision SMFFL1 Starter Class SMF, Single Phase 1 Type of operator Toggle No of Poles 1 2 NEMA Type Starter Open Type NEMA Type 1 General Purpose enclosure, surface mounting 3R, 4 & 12 watertight, dust-tight, metallic enclosure with clear cover NEMA Type 4 watertight, dust-tight, metallic enclosure Features Catalog Number Catalog Number Catalog Number Catalog Number Standard SMFF01 SMFFG1 SMFFWN1 Red Pilot Light SMFF01P SMFFG1P Standard SMFF02 SMFFG2 SMFFWN2 Red Pilot Light SMFF02P SMFFG2P Handle with Handle Guard/Lock-off Class SMF, Single Phase 1 Toggle 1 Standard SMFFG5 SMFFW1 2 Red Pilot Light SMFFG5P SMFFW1P 2 1 One heater element required. 2 Furnished with (1) 3 4" NPT Outlet in bottom (reversible for top feed). 4

5 Manual Control Heater Elements, Class SMF Ordering Information 1. Determine number of heater elements required from Table A. 2. Determine motor full load current and service factor. 3. If the motor and controller are in the same ambient temperature: a. For 1.15 to 1.25 service factor motors, use 100% of motor full load current for heater element selection. b. For 1.0 service factor motors use 90% of motor full load current for heater element selection. c. Heater elements are class If the motor and controller are in different ambient temperatures, multiply motor full load current by the multiplier in Table B. Use the resultant full load current for heater element selection. 5. Select proper heater element from table below. 6. All tables are based on the operation of the motor and controller in the same ambient temperature, 40 C (104 F) or less. Always be certain the correct heater element is installed in the starter before operating the motor. Heater Elements Class SMF Heater Motor Full-Load List Catalog Number Motor Full-Load Current (Amps) SMFH SMFH SMFH SMFH SMFH SMFH SMFH SMFH SMFH SMFH SMFH SMFH SMFH SMFH SMFH SMFH SMFH SMFH SMFH SMFH SMFH SMFH SMFH SMFH SMFH SMFH Catalog Number Motor Full-Load Current (Amps) SMFH SMFH SMFH SMFH SMFH SMFH SMFH SMFH SMFH SMFH SMFH SMFH SMFH SMFH SMFH SMFH SMFH SMFH SMFH SMFH SMFH SMFH SMFH SMFH SMFH SMFH Table A Number of Heater Elements Number of Heater Device Elements Notes SMFF*1 SMFF*2 SMFF*3 SMFF*4 SMFF*5 SMFF*6 SMFF*22 SMFF*44 SMFF*11 SMFF*22 1 All single pole and two pole SMF starters require only one Heater Element. 2 Duplex Unit. One Heater Element per starter. 2 Two Speed Starter. One Heater Element per speed. Table B Special Applications Heater Element Selection Ambient Temperature of Motor Continuous Duty Motor Service Factor Same as Controller Ambient Constant 10ºC (18ºF) Higher than Controller Ambient 1.15 to Constant 10ºC (18ºF) Lower than Controller Ambient 5

6 Manual Control Class 11 Manual Starters Class 11 Manual starters are used for single and poly-phase motors up to 460V. Starters have bimetallic heater elements to provide class 10 overcurrent protection. Each starter has a fourth bimetallic strip that reacts only to the ambient temperature inside the control panel. This ambient compensation helps prevent the starter from nuisance tripping when the panel temperature is higher than the ambient temperature of the motor. Standard Features include: ON/OFF rotary handle with lockout and visible trip indication Adjustment dial for setting to motor FLA (Starters only) Low Voltage Protection (LVP) Option Short Circuit trip at 13 times the maximum setting of the the FLA dial or rated current Ambient compensated up to 140 F Phase loss sensitivity Test trip function LVP Option Meets OSHA Requirements UL Listed CSA Certified NEMA 1 General purpose Manual Starter Class 11-3RV Max HP Enclosure Single Phase 3-Phase NEMA 1 FLA HP Ratings HP Ratings General Purpose Adjustment Range 1 115V 230V 200V 230V 460V 575V Catalog Number / /2 11MD3B /8 1/3 3/ QD3B /6 1/ RD3B / TD3B /2 1 1/ / UD3B / / VD3B WD3B 1 Instantaneous Magnetic Trip will occur at 13 times the maximum FLA dial setting or rated switch current. 2 Shaded Ratings apply for Manual Motor Controllers Only! These Ratings do not apply as UL Listed Manual Combination Starters. 6

7 Enclosed NEMA Starters In stock and available Siemens starters in NEMA enclosures are capable of withstanding the most severe and demanding industrial, continuous duty applications. We offer a complete and diverse range of NEMA-enclosed starters that include motormatched half sizes, in addition to standard full NEMA sizes. The NEMA Starter stock offering includes the following: 3-phase, full voltage NEMA rated or half-size rated contactor ESP200 solid state overload relay Adjustable trip class 5-30 NEMA 1 general purpose enclosure with an overload reset button mounted to the cover Enclosed NEMA Class 14 Starters with ESP200 Solid State Overload Relays in stock Max HP Overload Enclosure NEMA Volts 230 Volts 460 Volts 575 Volts NEMA Size Half Size Coil Voltage Amp Range Frame Size General Purpose Catalog # 1/2 3/4 1 1/ v/240v A 14BUB32BA 1 1/2 1 1/ v/240v 3-12 A1 14BUC32BA 1/2 3/4 1 1/ v/240v A 14CUB32BA v/240v 3-12 A1 14CUC32BA v/240v A1 14CUD32BA v/240v 3-12 A1 14DUC32BA v/240v A1 14DUD32BA v/480v A1 14DUD32BC 7 1/2 7 1/ v/240v A1 14DUE32BA 7 1/2 7 1/ v/480v A1 14DUE32BC /4 120v/240v A1 14EUE32BA v/240v B 14FUF32BA v/480v B 14FUF32BC v/240v B 14HUG32BA Field modification kits Type Auxiliary Switch Class 14, 17, 18, 40 14, 17, 18, 40 14, 17, 18, 40 Controller Size or Rating 00-4 or (20-200A) 00-4 or (20-200A) 00-4 or (20-200A) Contacts Catalog Number 1 NO 49AB10 1NC 1NO & 1NC 49AB01 49AB11 Type Pilot Devices Class Controller Size or Rating Enclosure Type Function Catalog Number 14, 40, LC, LEN, CLM 00-4 or (20-200A 1 Start, Stop Pushbuttons 49SBPB5 14, 40, LC, LEN, CLM 00-4 or (20-200A) 1 Hand-Off-Auto Selector switch 49SBSB1 7

8 Faster delivery Non-stock Enclosed Starters (No factory modifications) Built-to-order items without modifications As part of the Controls Express program, we have also included over 2,000 of the most popular Siemens enclosed NEMA starter styles without modifications. These include: Class 14 non-reversing NEMA starters Class 17 fusible and non-fusible combination starters LC, LE and CLM lighting contactors For orders of up to six pieces, the lead time for each of these built-to-order items will now be 1-2 days. You can view a complete listing of the starters at Class 17 Combination Starters with Factory Modifications Built-to-order items with modifications Combination starters with factory modifications In addition to the built-to-order items described above, Siemens can provide rapid delivery on a range of common Class 17 fusible and non-fusible Combination starters that include the most commonly requested factory modifications. The Combination starters come with 120VAC coils and are available in NEMA 1 and NEMA 12/3R enclosures. The shipping process starts as soon as the order is received, resulting in a rapid 3-day turnaround time. Class 17 Combination Ordering Information Replace the (*) with the M# from the Mod Table Example: Base part#: 17CUC92BF Factory Mods wanted: 1.) Hand-Off-Auto Selector Switch (A3) 2.) Red On Pilot Light (FA) 3.) Green Off Pilot Light (FK) 4.) CPT with Sec. Fusing 480/240:120V (BA) Mod Group = M30 New Factory Modified Starter Part# = 17CUC92BFM30 Class 17 8

9 Made-to-Order Items with Mods Non-Fusible with Solid State Overload, Class 17 with 120VAC Coil Max Hp Overload Enclosure Disc Frame Amp NEMA 1 General Purpose VAC VAC VAC VAC NEMA Size Amp Range Size Rating Catalog Number A CUC92BF* A DUC92BF* A DUD92BF* Fusible with Solid State Overlay, Class 17 with 120VAC Coil Max Hp Overload Disc Amp Rating Enclosure NEMA 1 General Purpose NEMA 12 NEMA 3/3R Industrial use weatherproof 200 VAC 230 VAC 460 VAC 575 VAC NEMA Size Amp range Frame Size Fuse Clip amp/volts Catalog number Catalog Number 1 1/ A 30 30A/600V 17CUB92BF11* A A/250V 17CUC92BF10* A A/600V 17CUC92BF11* 17CUC92NF11* A A/250V 17DUC92BF11* A A/600V 17DUD92BF11* 17DUD92NF11* B 60 60A/600V 17FUF92BF13* 17FUF92NF13* These two part numbers come standard as NEMA 12 enclosures, and require an additional field kit to convert enclosures to NEMA 3/3R. Please refer to tables on page 17/99 of the SpeedFax. Factory Mod Groups Operator Type On Light Off Light CPT Mod Suffixes Mod Group None A1,FA M24 Start-Stop Pushbuttons (A1) Red On Pilot Light (FA) None Green Off Pilot Light (FK) CPT Sec. Fuse 480/240:120V (BA) A1,FA,BA M32 CPT Pri/Sec Fuse 480/240:120V (DA) A1,FA,DA M40 None A1,FA,FK M25 CPT Sec. Fuse 480/240:120V (BA) A1,FA,FK,BA M33 CPT Pri/Sec Fuse 480/240:120V (DA) A1,FA,FK,DA M41 Start-Stop Pushbuttons (A1) & Hand-Off-Auto Selector Switch (A3) None Green Off Pilot Light (FK) None A1,A3,FK M23 CPT Sec. Fuse 480/240:120V (BA) A1,A3,FK,BA M31 CPT Pri/Sec Fuse 480/240:120V (DA) A1,A3,FK,DA M39 None A3 M20 Class 17 Mods None None CPT Sec. Fuse 480/240:120V (BA) A3,BA M28 CPT Pri/Sec Fuse 480/240:120V (DA) A3,DA M36 None A3,FA M21 CPT Sec. Fuse 480/240:120V (BA) A3,FA,BA M29 Hand-Off-Auto Selector Switch (A3) Red On Pilot Light (FA) Green Off Pilot Light (FK) CPT Pri/Sec Fuse 480/240:120V (DA) A3,FA,DA M37 None A3,FA,FK M22 CPT Sec. Fuse 480/240:120V (BA) A3,FA,FK,BA M30 CPT Pri/Sec Fuse 480/240:120V (DA) A3,FA,FK,DA M38 None A3,FS M26 None CPT Sec. Fuse 480/240:120V (BA) A3,FS,BA M34 Red On PTT Pilot Light (FS) Green Off PTT Pilot Light (FU) CPT Pri/Sec Fuse 480/240:120V (DA) A3,FS,DA M42 None A3,FS,FU M27 CPT Sec. Fuse 480/240:120V (BA) A3,FS,FU,BA M35 CPT Pri/Sec Fuse 480/240:120V (DA) A3,FS,FU,DA M43 9

10 Lighting Contactors In stock and available Siemens lighting contactors can be used individually for simple control schemes or as integral components in fullfeatured lighting control systems. They provide reliable and efficient means of local or remote switching of lighting as well as non-inductive loads. Rugged construction, heavyduty ratings and a wide selection of control options and accessories makes the Siemens lighting contactors the right choice for lighting applications. The Controls Express lighting contactor offering includes the following: Class LC Electrically held with contacts rated up to 30A at 600V Open or in a NEMA 1 general purpose enclosure Power poles can easily be added at any time based on changing need Power poles can be field converted from NO to NC Device convertible to mechanically held with conversion kit Class LE Electrically held with contacts rated A at 600V Open or in a NEMA 1 general purpose enclosure Built-in auxiliary contacts for convenient 3-wire control Type Contactor Type LC LE Amp Rating Normally Open Poles Coil Voltage Enclosure Open Catalog Number NEMA 1 General Purpose Catalog Number 3 120V LCE00C003120A LCE01C003120A 6 120V LCE00C006120A LCE01C006120A 30A 8 120V LCE00C008120A LCE01C008120A V LCE00C010120A LCE01C010120A V LCE00C012120A LCE01C012120A 20A 3 120V LEN00B003120B LEN01B003120B 4 120V LEN00B004120B LEN01B004120B 3 120V LEN00C003120B LEN01C003120B 30A 4 120V LEN00C004120B LEN01C004120B 6 120V LEN01C006120B 60A 3 120V LEN00D003120B LEN01D003120B 100A 3 120V LEN00E003120B LEN01E003120B 200A 3 120V LEN01F003120A Accessory Contactor Type Power Pole Kits LC 30A Electrically Held to Mechanically Held Conversion Kit Auxiliary Contacts LC LC LE Contactor Size Description Catalog Number Single power pole 49LCPP1A Double power pole 49LCPP2A 30A 2-wire, VAC 49LCCM2A 3-wire, VAC 49LCCM5A 30A 1 NO or 1 NC based on mounting position 49LCAC1PA 2 NO or 2 NC based on mounting position 49LCAC2PA 20A 1 NO & 1 NC front mounted 3RH2911-1HA11 30A 1 NO & 1 NC side mounted 3RH2911-1DA A 1 NO & 1 NC side mounted 3RH1921-1DA11 Lighting Contactor Enclosure LC 30A Blank enclosure for field assembly 49EC14GB140807R 10

11 Pushbutton Stations Class 50 Standard Duty Application Standard duty control stations are used with magnetic controllers to control the starting, stopping, reversing or speed of applicable motors. Stations are assembled of one or two pushbutton or selector switch in a variety of combinations to provide compact control units for remote control of magnetic starters and contactors. Station enclosures are available in Type 1 surface mounted. Features Type 1 surface mounted bases are constructed of 14 gauge sheet steel, primed and finished in baked gray enamel. The base is predrilled to receive a variety of contact blocks, pilot lights and accessory devices. Covers are of 20 gauge sheet steel, wrap- around construction, primed and finished in baked gray enamel. Enclosures are predrilled and tapped for 3/4 conduit. Two pushbuttons surface mounting, NEMA 1 Electrical Ratings NEMA AC Ratings 50/60Hz Nema B600 5 Continuous Amps Volts Make Break VA Selection and Ordering Data 1 unit surface mount 2 unit surface Operator Identifications A = Momentary raised pushbutton red, surface, label STOP A = 3 position selector switch, surface, label HAND-OFF-AUTO A = 2 position selector switch, surface, label OFF-ON B = Momentary pushbutton green, surface, label START A = Momentary pushbutton red, raised, label STOP B = Momentary pushbutton, surface, label FORWARD A = Momentary pushbutton, surface, label REVERSE B = Momentary pushbutton surface, label OPEN A = Momentary pushbutton, surface, label CLOSE B = Momentary pushbutton, surface, label UP A = Momentary pushbutton, surface, label DOWN Degree of Protection NEMA 1 Contacts / Replacement Switch Block 1NO - 1NC with common jumper (50ZAC1) Number of Command Points Catalog Number 1 50AA3F NEMA 1 2 NO 2SPST (50ZAC8) 1 50AA3C3 NEMA 1 2 NO 2SPST (50ZAC8) 1 50AA3C6 NEMA 1 1 NO, 1 NC (50ZAC2) 2 50CA3DE NEMA 1 2 NO (50ZAC3) 2 50DA3KL NEMA 1 2 NO (50ZAC3) 2 50DA3HJ NEMA 1 2 NO (50ZAC3) 2 50DA3NP 11

12 Pushbutton Stations Class 52 Heavy Duty, Watertight/Oil-tight Application Oil-tight pilot controls and accessories are designed to provide long, trouble free service in the most demanding industrial applications. These controls are oil and dust tight and meet NEMA Type 12 specifications. Electrical Ratings NEMA AC Ratings 50/60Hz Nema A Continuous Amps Volts Make Break VA Selection and Ordering Data Actuator Identification C = top device in station B = middle device in station A = bottom device in station Degree of Protection Contact Number of Command Points Catalog Number A = Maintained metal mushroom head red, label EMERGENCY STOP NEMA 12 1NO - 1NC 1 52C117A 1 unit control station A = 2 position selector switch OFF-ON NEMA 12 1NO - 1NC 1 52C150A 2 unit control station 3 unit control station A = 3 position selector switch HAND-OFF-AUTO NEMA 12 1NO - 1NC 1 52C156A B = Momentary flush pushbutton black, label START A = Momentary raised pushbutton red, label STOP B = Momentary flush pushbutton, label FORWARD A = Momentary flush pushbutton, label REVERSE B = Momentary flush pushbutton, label UP A = Momentary flush pushbutton, label DOWN C = Momentary flush pushbutton black, label FORWARD B = Momentary flush pushbutton black, label REVERSE A = Momentary raised pushbutton red, label STOP C = Momentary flush pushbutton black, label UP B = Momentary flush pushbutton black, label DOWN A = Momentary raised pushbutton red, label STOP NEMA 12 NEMA 12 NEMA 12 NEMA 12 NEMA C201A 2 52C204A 2 52C223A 3 52C301A 3 52C332A 12

13 30.5 mm pilot device Class 52 convenience packs Siemens heavy duty water and oil-tight line of 30mm pilot devices are now more accessible than ever with the new pilot device convenience packs. The most common assembled 30mm pilot devices are now offered in attractive transparent clam-shell packaging. This will include alternative legend plates, various colors of lenses, caps and operating heads where applicable. One, two and three hole empty enclosures can be purchased for pairing with your choice of pilot devices. The same products relied on by America s leading industrial manufacturers for long, trouble-free service in the most demanding of applications are now at your fingertips. Convenience pack features and benefits 30mm product features Meets NEMA type 1, 3, 4, 4X, 12 and automotive standards Heavy duty rated NEMA A600 contacts Bifurcated movable contacts with touch safe terminals UL listed file #E22655 CSA certified file #LR6535 Convenience pack benefits Attractive clear clam shell packaging of the most common 30mm pilot devices Alternative legend plates, various colors of lenses, caps and operating heads are included where applicable New break-away lid master box design for easy stocking, selecting and counter display 13

14 30.5mm Pilot Device Class 52 Convenience Packs Pilot lights 52PL4D2XYP 52PL4E2XYP 52PL4G2XYP Pilot light: Red, 24V full voltage with Super-Bright LED; two extra lenses in green and amber; and two legend plates: On and Stop. (1) Red, 24V Full Voltage, Pilot light, Super-Bright LED 52PL4D2XY (1) Green lens 52RA4S3 (1) Amber lens 52RA4S9 (1) On legend 52NL11 (1) Stop legend 52NL04 Pilot light: Red, 120V full voltage with Super-Bright LED; two extra lenses in green and amber; and two legend plates: On and Stop. (1) Red, 120V Full Voltage Pilot Light, Super-Bright LED 52PL4E2XY (1) Green lens 52RA4S3 (1) Amber lens 52RA4S9 (1) On legend 52NL11 (1) Stop legend 52NL04 Pilot light: Red, 120V transformer with Super-Bright LED; two extra lenses in green and amber; and two legend plates: On and Stop. (1) Red, 120V Transformer Pilot Light, Super-Bright LED 52PL4G2XY (1) Green lens 52RA4S3 (1) Amber lens 52RA4S9 (1) On legend 52NL11 (1) Stop legend 52NL04 Enclosures P30EMS01P multiples of 4 units 30mm pushbutton station: 1 hole NEMA 12/13 (IP52/54) standard enclosure P30EMS02P multiples of 2 units 30mm pushbutton station: 2 hole NEMA 12/13 (IP52/54) standard enclosure P30EMS03P multiples of 2 units 30mm pushbutton station: 3 hole NEMA 12/13 (IP52/54) standard enclosure Clam Shell Packaging Convenience Pack 14

15 Pushbuttons 52PA8A3KP multiples of 4 units Basic pushbutton: Green flat momentary with 1NO. Includes extra caps in black, red, yellow and blue and two legend plates: On and Start. (1) Green, momentary pushbutton with 1NO 52PA8A3K (1) Black cap 52RA1A1 (1) Red cap 52RA1A2 (1) Yellow cap 52RA1A4 (1) Blue cap 52RA1A5 (1) On legend 52NL11 (1) Start legend 52NL03 Pushbuttons 52PT6D2AYP Illuminated pushbutton: Red 24V full voltage, Super-Bright LED, 1NC-1NO includes extra lenses in green and amber, and two blank legend plates. (1) Red, illuminated pushbutton, 24V full voltage, Super-Bright LED with 1NC-1NO 52PT6D2AY (1) Green lens 52RA5S3 (1) Amber lens 52RA5S9 (2) Blank legend 52NL02 52PA8B2JP multiples of 8 units Basic pushbutton: Red extended momentary with 1NC. Includes extra caps in black and green and two legend plates: Stop and Off. (1) Red, momentary extended head pushbutton with 1NC 52PA8B2J (1) Black cap 52RA1B1 (1) Green cap 52RA1B3 (1) Stop legend, red 52NL04R (1) Off legend 52NL12 52PT6G2AYP Illuminated pushbutton: Red 120V transformer, Super-Bright LED, 1NC-1NO includes extra lenses in green and amber, and two blank legend plates. (1) Red, illuminated Pushbutton, 120V transformer, Super-Bright LED with 1NC-1NO 52PT6G2AY (1) Green lens 52RA5S3 (1) Amber lens 52RA5S9 (2) Blank legend 52NL02 Emergency stop 52PP2W2AP multiples of 4 units Push-pull: Red mushroom head 2-Pos, maintained, mushroom head, 1NO-1NC, includes extra mushroom head, two Stop legends, and a 90mm ring inscribed with Emergency Stop. (1) Red, E-STOP with mushroom head, 2-pos, maintained, 1NO-1NC 52PP2W2A (1) mushroom head 52RC3E2 (1) Stop legend, red 52NL04R (1) Stop legend 52NL04 (1) E-STOP ring legend 52AAR Emergency stop 52PR8W2AP multiples of 4 units Twist-to-release: Red mushroom head 2-Pos, maintained, mushroom head, 1NO-1NC, two Stop legends, and a 90mm ring inscribed with Emergency Stop. (1) Red, E-STOP with mushroom head, 2pos, maintained, 1NO-1NC 52PR8W2A (1) Stop legend, red 52NL04R (1) Stop legend 52NL04 (1) E-STOP ring legend 52AAR Selector switch 52SA2CABA1P multiples of 4 units Selector switch: 3 Position maintained, short lever, 1NO-1NC, with two legend plates: Hand-Off-Auto and For-Off-Rev. (1) 3-Position maintained short lever selector switch with 1NO-1NC 52SA2CABA1 (1) Hand-Off-Auto legend 52NL37 (1) For-Off-Rev legend 52NL38 Catalog Number: 52SA2AABA1P multiples of 4 units Selector switch: 2 Position maintained, short lever, 1NO-1NC, with two legend plates: Forward-Reversing and Off-On. 1) 2-Position maintained short lever selector switch with 1NO-1NC 52SA2AABA1 (1) Forward-Reversing legend 52NL31 (1) Off-On legend 52NL26 For a complete listing of Control Items that we offer, go to: 15

16 Published by Siemens Industry, Inc Siemens Industry, Inc Triangle Parkway Norcross, GA For more information, please contact our Customer Support Center. Phone: usa.siemens.com/construction-controls Order No.: CPBR-SIST Printed in U.S.A Siemens Industry, Inc. The technical data presented in this document is based on an actual case or on as-designed parameters, and therefore should not be relied upon for any specific application and does not constitute a performance guarantee for any projects. Actual results are dependent on variable conditions. Accordingly, Siemens does not make representations, warranties, or assurances as to the accuracy, currency or completeness of the content contained herein. If requested, we will provide specific technical data or specifications with respect to any customer s particular applications. Our company is constantly involved in engineering and development. For that reason, we reserve the right to modify, at any time, the technology and product specifications contained herein.