8650 Enterprise Drive, Peosta IA / Fax BELOW 40 F=SAE10W-30 ENGINE OIL CAPACITY:

Transcription

1 8650 Enterprise Drive, Peosta IA / Fax PARTS LIST FOR CWC MGH (AFTER SERIAL # ) CWC MGV (AFTER SERIAL # ) CWC MGH (AFTER SERIAL # ) CWC MGV (AFTER SERIAL # ) ENGINE OIL GRADE: HONDA: SAE10W-30 VANGUARD: ABOVE 40 F=SAE30 BELOW 40 F=SAE10W-30 ENGINE OIL CAPACITY: 54 oz. PUMP OIL GRADE: Mi-T-M #AW PUMP OIL CAPACITY: 40.6 oz. PRESSURE NOZZLE SIZE FOR CWC MGH/GV 5.0 Copyright 2002, Mi-T-M Corporation CWC MGH/GV 1 3.5

2 This Parts Listing has been compiled for your benefit. You can be assured your Mi-T-M Cold Water Pressure Washer was constructed and designed with quality and performance in mind using over 25 years experience in the pressure washer business. Each component has been rigorously tested to insure the highest level of acceptance. The contents of this Parts Listing are based on the latest product information available at the time of publication. Mi-T-M reserves the right to make changes in price, color, materials, equipment, specifications or models at any time without notice. WARNING THIS IS A PROFESSIONAL HIGH PRESSURE, COLD WATER PRESSURE WASHER. CAUTION SHOULD BE OBSERVED WHEN USING OR REPAIRING THIS UNIT! READ AND FOLLOW THE SAFETY WARNINGS LISTED BELOW BEFORE ATTEMPTING ANY REPAIRS ON THIS PRESSURE WASHER! SAFETY WARNINGS 1. NEVER alter or modify the equipment. Be sure any accessory items and system components being used will withstand the pressure developed. Use only genuine Mi-T-M parts for repair of your pressure washer. Failure to do so can cause hazardous operating conditions and will VOID warranty. 2. NEVER make adjustments on machinery while the unit is connected to the power source. Turning over the machinery by hand during adjustment or cleaning might start the machinery, causing serious injury to the operator. 3. Know how to stop and bleed pressures quickly. Be thoroughly familiar with controls. 4. Before servicing the unit, turn unit off, relieve the water pressure and allow the unit to cool down. Do not make repairs while the unit is running. Service in a clean, dry, flat area. 5. After testing the machine, DO NOT leave the pressurized unit unattended. Shut off the unit and release trapped pressure before leaving. Copyright 2002, Mi-T-M Corporation 2

3 Table of Contents SPECIFICATIONS FOR CWC MGH/1MGV...4 SPECIFICATIONS FOR CWC MGH/1MGV...5 FRAME ASSEMBLY FOR CWC MGH/1MGV...6 FRAME ASSEMBLY FOR CWC MGH/1MGV...8 PUMP ASSEMBLY ( AND )...10 UNLOADER ASSEMBLY (8-0522)...12 GUN ASSEMBLY ( )...14 HONDA ENGINE ASSEMBLY ( )...16 VANGUARD ENGINE ASSEMBLY ( )...18 Copyright 2002, Mi-T-M Corporation 3

4 SPECIFICATIONS FOR CWC MGH/1MGV CWC MGH/V MODEL NUMBER CWC MGH CWC MGV Operating Pressure (PSI/Bar): 4000/276 High Pressure Nozzle: 5.0 Water Volume (GPM/lpm): 5.0/18.9 Engine: Honda Briggs & Stratton Vanguard Horsepower 20.0 Engine Type 4 Stroke, Overhead Valve, Single Cylinder Oil Type SAE10W-30 Above 40 F = SAE30/Below 40 F = SAE10W-30 Oil Capacity (oz./liter) 54/1.6 Low Oil Protection Oil Alert Oil Guard Fuel Type Unleaded Gasoline 86 Octane Minimum Fuel Capacity (gal./liter) 11.5/43.5 Starting Electric Maximum No Load RPM 3600 (+/- 100) RPM Heat Dump Valve Relieves heated water during unloader bypass stage Pump: Belt Driven, Oil Bath, Triplex Piston Oil Type Mi-T-M Pump Oil #AW Oil Capacity (oz./liters) 40.6/1.2 Plungers Ceramic Manifold Forged Brass Valves Stainless Steel Unloader Preset Unit Net Weight (lbs/kg) 378/ /165 Unit Shipping Weight (lbs/kg) 501/ /220.5 Unit Net Dimension (in/cm) 43Lx23.75Wx36H/109Lx70.5Wx91.5H Unit Shipping Dimension (in/cm) 46.5Lx31.5Wx48.5H/118Lx80Wx123H Copyright 2002, Mi-T-M Corporation 4

5 SPECIFICATIONS FOR CWC MGH/1MGV CWC MGH/V MODEL NUMBER CWC MGH CWC MGV Operating Pressure (PSI/Bar): 5000/344.7 High Pressure Nozzle: 3.5 Water Volume (GPM/lpm): 4.0/15.1 Engine: Honda Briggs & Stratton Vanguard Horsepower 20.0 Engine Type 4 Stroke, Overhead Valve, Single Cylinder Oil Type SAE10W-30 Above 40 F = SAE30/Below 40 F = SAE10W-30 Oil Capacity (oz./liter) 54/1.6 Low Oil Protection Oil Alert Oil Guard Fuel Type Unleaded Gasoline 86 Octane Minimum Fuel Capacity (gal./liter) 11.5/43.5 Starting Electric Maximum No Load RPM 3600 (+/- 100) RPM Heat Dump Valve Relieves heated water during unloader bypass stage Pump: Belt Driven, Oil Bath, Triplex Piston Oil Type Mi-T-M Pump Oil #AW Oil Capacity (oz./liters) 40.6/1.2 Plungers Ceramic Manifold Forged Brass Valves Stainless Steel Unloader Preset Unit Net Weight (lbs/kg) 378/ /165 Unit Shipping Weight (lbs/kg) 501/ /220.5 Unit Net Dimension (in/cm) 43Lx23.75Wx36H/109Lx70.5Wx91.5H Unit Shipping Dimension (in/cm) 46.5Lx31.5Wx48.5H/118Lx80Wx123H Copyright 2002, Mi-T-M Corporation 5

6 FRAME ASSEMBLY FOR CWC MGH/1MGV CWC MGH/GV RD Copyright 2002, Mi-T-M Corporation 6

7 CWC MGH_GV RD FRAME ASSEMBLY FOR CWC MGH/1MGV REF. # DESCRIPTION PART # 1MGH 1MGV REF. # DESCRIPTION PART # 1MGH 1MGV REF. # DESCRIPTION PART # 1MGH 1MGV 1 Grommet Decal- Warning: Muffler Hot (E/S) High Pressure Cross-Over Hose Frame Assembly A Decal-Die Cut Nozzles Nipple Wheel Grommet Tee Jamnut Decal-Mi-T-M Stripe Large Plug Bolt Mi-TM Logo Unloader Washer Decal-White Die Cut Bushing Support Bracket A Spray Nozzle Barb Nut Spray Nozzle Branch Tee Decal- Data Plate N/A Spray Nozzle Elbow Battery Box Spray Nozzle Easy Start Valve Nut Bushing Hose Barb Washer Sheave Strainer Assembly (Inc , 97, 98) Battery Retainer A Bolt Strainer Cap Bolt Thermal Valve Strainer Gasket Battery Cable Cover Key w/pump Strainer Screen Battery Cable *(Four Feet Required) Pos.=22" Neg.=16" Pump Strainer Bowl Terminal Ring Locknut Bracket A Tag- Battery Washer Garden Hose Swivel Decal- Caution: Disconnect Battery (E/S) Pump Bracket A Garden Hose Gasket Battery Washer Tag- Water Inlet Supply Bolt Bolt Fuel Tank Assembly (Inc. 101, 102) Shim Bolt Decal- Caution: Gas Only (E/S) Fuel Line *(Four Feet Required) Brace Tightener A Fuel Tank (See ) N/A Sep Fuel Line *(Three Feet Required) Bolt Fuel Cap w/guage Hose Clamp Locknut Fuel Pick-up Motor Assembly Washer Quick Connect Plug Motor Assembly Bolt Quick Connect Socket Key Branch Tee Washer Beltguard Back Assembly (Inc ) Elbow Bolt Decal- Warning/Caution (E/S) Worm Clamp Pressure Hose Assembly (Inc ) Beltguard Back (See ) N/A Sep Hose *(Two Feet Reqired) Quick Connect Plug Edging *(Two Feet Required) Elbow Pressure Hose Decal- Warning: Beltguard (E/S) Hose *(Three Feet Required) Quick Connect Socket Sheave Clamp Gun/Lance Assembly (Inc ) Belt Elbow Quick Connect Plug Bushing Bolt Gun Bolt Manifold Block Grip Handle Beltguard Cover Assembly (Inc ) Quick Connect Socket Lance A Edging *(Four Feet Required) O-ring (Replacement Only) Decal- Warning: Risk of Injection (E/S) Beltguard Cover (See ) N/A Sep Nipple Quick Connect Decal- Operating Instructions (E/S) Heat Shrink Tubing *(One Foot Required) O-ring (Replacement Only) Fastener Safety Valve *Must Order in One Foot Lengths Copyright 2002, Mi-T-M Corporation 7

8 FRAME ASSEMBLY FOR CWC MGH/1MGV CWC MGH/V RD Copyright 2002, Mi-T-M Corporation 8

9 CWC MGH/GV RD FRAME ASSEMBLY FOR CWC MGH/1MGV REF. # DESCRIPTION PART # 1MGH 1MGV REF. # DESCRIPTION PART # 1MGH 1MGV REF. # DESCRIPTION PART # 1MGH 1MGV 1 Grommet Decal- Warning: Muffler Hot (E/S) High Pressure Cross-Over Hose Frame Assembly A Decal- Die Cut Nozzles Nipple Wheel Grommet Tee Jamnut Decal- Mi-T-M Stripe Plug Bolt Mi-T-M Logo Unloader Washer Decal- Die Cut Bushing Support Bracket A Spray Nozzle Barb Nut Spray Nozzle Branch Tee Decal- Data Plate N/A Spray Nozzle Elbow Battery Box Spray Nozzle Easy Start Valve Nut Bushing Hose Barb Washer Sheave Strainer Assembly (Inc , 97, 98) Battery Retainer A Bolt Strainer Cap Bolt Thermal Valve Strainer Gasket Battery Cable *(Four Feet Required) Pos.=22" Neg.=16" Key w/pump Strainer Screen Battery Cable Cover Pump Strainer Bowl Terminal Ring Locknut Bracket A Tag- Battery Washer Garden Hose Swivel Decal- Caution: Disconnect Battery (E/S) Pump Bracket A Garden Hose Gasket Battery Washer w/pump Tag- Water Inlet Supply Bolt Bolt w/pump Fuel Tank Assembly (Inc. 101, 102) Shim Bolt Decal- Caution: Gas Only (E/S) Fuel Line *(Four Feet Required) Brace Tightner A Fuel Tank (See ) N/A Sep Fuel Line *(Three Feet Required) Bolt Fuel Cap w/guage Hose Clamp Locknut Fuel Pick-up Motor Assembly Washer Quick Connect Plug Motor Assembly Bolt Quick Connect Socket Key Branch Tee Washer Beltguard Back Assembly (Inc ) Elbow Bolt Decal- Warning/Caution (E/S) Clamp Pressure Hose Assembly (Inc ) Beltguard Back (See ) N/A Sep Hose *(Two Feet Required) Quick Connect Plug Edging *(Two Feet Required) Elbow Pressure Hose Decal- Warning: Beltguard (E/S) Hose *(Three Feet Required) Quick Connect Socket Sheave Clamp Gun/Lance Assembly (Inc ) Belt Elbow Quick Connect Plug Bushing Bolt Gun Bolt Manifold Block Grip Handle Beltguard Cover Assembly (Inc ) Quick Connect Socket Lance A Edging *(Four Feet Required) O-ring (Replacement Only) Decal- Warning: Risk of Injection (English Only) Beltguard Cover (See ) N/A Sep Nipple Quick Connect Decal- Operating Instructions (E/S) Heat Shrink Tubing *(One Foot Required) O-ring (Replacement Only) Fastener Safety Valve *Must Order in One Foot Lengths Copyright 2002, Mi-T-M Corporation 9

10 PUMP ASSEMBLY ( AND ) & EDW Copyright 2002, Mi-T-M Corporation 10

11 & EDW PUMP ASSEMBLY ( AND ) REF. # DESCRIPTION PART # REF. # DESCRIPTION PART # REF. # DESCRIPTION PART # 1 Valve Cap Low Pressure Seal (See ) N/A Sep Screw N/A 6 2 Back-Up Ring Spacer Lockwasher N/A 6 3 O-Ring Snap-Ring Connecting Rod Valve w/o-ring (See ) N/A Sep Oil Seal Plunger Rod Back-Up Ring Screw Connecting Rod Pin O-ring Shaft Cover N/A 1 43 Slinger Washer Manifold Pump O-ring Piston Lockwasher Oil Seal Washer Screw Bearing Screw O-ring Key Oil Dipstick Plug Crankshaft (Pump ) N/A 1 48 Spring Retainer O-ring Crankshaft (Pump ) N/A 1 49 Reflector Pump Plug Crankcase Oil Sight Support Ring (See ) N/A Sep Screw O-ring High Pressure Seal (See ) N/A Sep Crankcase Cover (Inc ) Shim Low Pressure Seal (See ) N/A Sep O-ring Support Bearing Cover (Inc ) Piston Guide O-ring Valve Kit (Inc. 6 each 4-6) O-ring (See ) N/A Sep Oil Sight Glass Oil Seals Kit (Inc , 18-20) Back-Up Ring (See ) N/A Sep Spring Retainer Copyright 2002, Mi-T-M Corporation 11

12 UNLOADER ASSEMBLY (8-0522) RD Copyright 2002, Mi-T-M Corporation 12

13 RD UNLOADER ASSEMBLY (8-0522) REF. # DESCRIPTION PART # REF. # DESCRIPTION PART # 1 Brass Cap O-ring Spring Shutter Spring Guide Seat Ball O-ring Back-up Ring (See ) N/A Sep Valve Body O-ring (See ) N/A Sep Check Valve Seat Piston O-ring Lock Ring Check Valve Set Screw Spring Piston Housing O-ring O-ring Nipple Back-up Ring (See ) N/A Sep. 1 Upper Seal Kit (Inc. 5, 6) O-ring (See ) N/A Sep. 1 Lower Seal Kit (Inc. 12, 13) Spacer Copyright 2002, Mi-T-M Corporation 13

14 GUN ASSEMBLY ( ) RD Copyright 2002, Mi-T-M Corporation 14

15 RD GUN ASSEMBLY ( ) REF. # DESCRIPTION PART # REF. # DESCRIPTION PART # 1 Screw Control Pin (See ) N/A Sep. 1 2 Housing- Left Side Guide Sleeve Cap Lock Pin O-ring (See ) N/A Sep Safety Lock Spring (See ) N/A Sep Trigger Valve Spring (See ) N/A Sep Cam Trigger (See ) N/A Sep. 1 7 Valve Ball (See ) N/A Sep Pin Valve Seat (See ) N/A Sep Discharge Tube Assembly Inlet Tube Assembly Housing- Right Side Valve Body Repair Kit (Inc. 4-8, 11, 12, 17) O-ring (See ) N/A Sep. 1 Copyright 2002, Mi-T-M Corporation 15

16 HONDA ENGINE ASSEMBLY ( ) RD Copyright 2002, Mi-T-M Corporation 16

17 RD HONDA ENGINE ASSEMBLY ( ) REF. # DESCRIPTION PART # 1 Muffler Assembly (Inc. 2-14) Flange Nut (See ) N/A Sep. 4 3 Exhaust Pipe - Oil Filter Side (See ) N/A Sep. 1 4 Exhaust Gasket (See ) N/A Sep. 2 5 Screw (See ) N/A Sep. 4 6 Outer Muffler Protector (See ) N/A Sep. 1 7 Exhaust Pipe Band (See ) N/A Sep. 1 8 Muffler (See ) N/A Sep. 1 9 Inner Muffler Protector (See ) N/A Sep Flange Bolt (See ) N/A Sep Flange Bolt (See ) N/A Sep Muffler Stay (See ) N/A Sep Flange Bolt (See ) N/A Sep Flange Bolt (See ) N/A Sep Engine-20 HP (Inc ) Bolt (See ) N/A Sep Air Filter Cover (See ) N/A Sep. 1 Copyright 2002, Mi-T-M Corporation 17

18 VANGUARD ENGINE ASSEMBLY ( ) DCE Copyright 2002, Mi-T-M Corporation 18

19 DCE VANGUARD ENGINE ASSEMBLY ( ) REF. # DESCRIPTION PART # 1 Engine-20.0 HP Vanguard N/A Sep. 1 2 Muffler Guard Screw Terminal Wire *(Three Feet Required) Hose *(Two Feet Required) Clip Terminal Ring Copyright 2002, Mi-T-M Corporation 19

20 Copyright 2002, Mi-T-M Corporation 20