HS-3005-CMK0/DMK0: HS-3006-DMK0:

Transcription

1 8650 Enterprise Drive, Peosta IA / Fax PARTS LIST FOR HS-3005-CMK0/DMK0 HS-3006-DMK0 (AFTER SERIAL #19532) Engine Oil Grade: Engine Oil Capacity: HS-3005-CMK0/DMK0: HS-3006-DMK0: Pump Oil Capacity: Pump Oil Grade: SAE10W oz. 112 oz oz. Mi-T-M #AW BTU Input: HS-3005-CMK0/DMK0: 453,600 HS-3006-DMK0: 536,200 Pressure Nozzle Size: HS-3005-CMK0/DMK0: 5.5 HS-3006-DMK0: 6.5 Copyright 2000, Mi-T-M Corporation 1

2 This Parts Listing has been compiled for your benefit. You can be assured your Mi-T-M hot water pressure washer was constructed and designed with quality and performance in mind using over 25 years experience in the pressure washer business. Each component has been rigorously tested to insure the highest level of acceptance. The contents of this Parts Listing are based on the latest product information available at the time of publication. Mi-T-M reserves the right to make changes in price, color, materials, equipment, specifications or models at any time without notice. WARNING THIS IS A PROFESSIONAL HIGH PRESSURE, HOT WATER PRESSURE WASHER. CAUTION SHOULD BE OBSERVED WHEN USING OR REPAIRING THIS UNIT! READ AND FOLLOW THE SAFETY WARNINGS LISTED BELOW BEFORE ATTEMPTING ANY REPAIRS ON THIS PRESSURE WASHER! SAFETY WARNINGS 1. NEVER alter or modify the equipment. Be sure any accessory items and system components being used will withstand the pressure developed. Use only genuine Mi-T-M parts for repair of your pressure washer. Failure to do so can cause hazardous operating conditions and will VOID warranty. 2. NEVER make adjustments on machinery while the unit is connected to the engine without first removing the ignition cable from the spark plug. Turning over the machinery by hand during adjustment or cleaning might start the engine and machinery with it, causing serious injury to the operator. 3. Know how to stop and bleed pressures quickly. Be thoroughly familiar with controls. 4. Before servicing the unit, turn unit off, relieve the water pressure and allow the unit to cool down. Do not make repairs while the unit is running. Service in a clean, dry, flat area. Block the wheels to prevent the unit from moving. Be especially careful to properly dispose of any flammable materials. 5. After testing the machine, DO NOT leave the pressurized unit unattended. Shut off the unit and release trapped pressure before leaving. Copyright 2000, Mi-T-M Corporation 2

3 Table of Contents DECAL PLACEMENT FOR HS-3005-CMK DECAL PLACEMENT FOR HS-3005/3006-DMK FRAME ASSEMBLY FOR HS-3005-CMK FRAME ASSEMBLY FOR HS-3005/3006-DMK BURNER ASSEMBLY (4-0009)...12 FUEL PUMP (3-0020) & FUEL SOLENOID ( ) ASSEMBLY...13 BOILER ASSEMBLY...14 ENGINE AND PUMP ASSEMBLY FOR HS-3005-CMK0/DMK ENGINE AND PUMP ASSEMBLY FOR HS-3006-DMK PUMP ASSEMBLY (3-0012)...20 UNLOADER ASSEMBLY ( & )...22 PRESSURE SWITCH ( )...23 CONTROL PANEL FOR HS-3005-CMK CONTROL PANEL FOR HS-3005/3006-DMK WATER STRAINER ( )...28 DETERGENT INJECTOR ( )...29 GUN WAND ( ) & DUAL LANCE ( & ) ASSEMBLY...30 WIRING DIAGRAM FOR HS-3005-CMK WIRING SCHEMATIC FOR HS-3005-CMK WIRING DIAGRAM FOR HS-3005/3006-DMK WIRING SCHEMATIC FOR HS-3005/3006-DMK WHEEL KIT (AW-5540/ )...40 STEAM OPTION (HX-0017)...42 STEAM OPTION (HX-0017) WIRING DIAGRAM FOR HS-3005-CMK STEAM OPTION (HX-0017) WIRING SCHEMATIC FOR HS-3005-CMK STEAM OPTION (HX-0017) WIRING DIAGRAM FOR HS-3005/3006-DMK STEAM OPTION (HX-0017) SCHEMATIC DIAGRAM FOR HS-3005/3006-DMK CAD CELL ASSEMBLY...52 CAD CELL ASSEMBLY WIRING DIAGRAM FOR HS-3005-CMK CAD CELL ASSEMBLY WIRING DIAGRAM FOR HS-3005/3006-DMK CAD CELL/STEAM COMBINATION WIRING DIAGRAM FOR HS-3005-CMK CAD CELL/STEAM COMBINATION WIRING SCHEMATIC FOR HS-3005-CMK CAD CELL/STEAM COMBINATION WIRING DIAGRAM FOR HS-3005/3006-DMK CAD CELL/STEAM COMBINATION WIRING SCHEMATIC FOR HS-3005/3006-DMK Copyright 2000, Mi-T-M Corporation 3

4 DECAL PLACEMENT FOR HS-3005-CMK0 SEL 3005 OMHS RD DIESEL 3006 Copyright 2000, Mi-T-M Corporation 4

5 OMHS RD DECAL PLACEMENT FOR HS-3005-CMK0 REF. # DESCRIPTION PART # QTY. REF. # DESCRIPTION PART # QTY. 1 Tag- Control Checklist Decal- "Run" Position Decal- Caution: Risk of Fire Decal- Throttle Decal- Engine Fuel Tag- Burner Checklist Decal- Diesel Only Decal- Data Plate N/A 1 5 Decal- Beltguard Decal- Silver Sticker N/A 1 6 Decal- Diesel Die Cut Decal- Clear Laminate N/A 1 7 Decal- Die Cut Decal- Warning/Caution Decal- Supra Hot Name Decal- Warning: Burner & Guard Decal- Caution: Risk of Injection Tag- Preset Unloader Tag- Battery Decal- Pump Instructions Decal- Caution: Battery Terminal Decal- Danger: Muffler Decal- "Stop" Position Decal- Do Not Use Ether Copyright 2000, Mi-T-M Corporation 5

6 DECAL PLACEMENT FOR HS-3005/3006-DMK0 ESEL 3006 OMHS RD DIESEL 3006 Copyright 2000, Mi-T-M Corporation 6

7 OMHS RD DECAL PLACEMENT FOR HS-3005/3006-DMK0 REF. # DESCRIPTION PART # QTY. REF. # DESCRIPTION PART # QTY. 1 Tag- Control Checklist Decal- "Stop" Position Decal- Caution: Risk of Fire Decal- "Run" Position Decal- Engine Fuel Decal- Throttle Decal- Diesel Only Tag- Burner Checklist Decal- Beltguard Decal- Data Plate N/A 1 6 Decal- Diesel Die Cut Decal- Silver Sticker N/A 1 7 Decal- Supra Hot Name Decal- Clear Laminate N/A 1 8 Decal- Die Cut Decal- Warning/Caution Decal- Die Cut Decal- Warning: Burner & Guard Decal- Caution: Risk of Injection Tag- Preset Unloader Decal- Caution: Battery Terminal Decal- Pump Instructions Tag- Battery Decal- Danger: Muffler Decal- Pull to Kill Decal- Do Not Use Ether Copyright 2000, Mi-T-M Corporation 7

8 FRAME ASSEMBLY FOR HS-3005-CMK0 OMHS BAR Copyright 2000, Mi-T-M Corporation 8

9 OMHS BAR FRAME ASSEMBLY FOR HS-3005-CMK0 REF. DESCRIPTION PART # QTY. REF. DESCRIPTION PART # QTY. REF. DESCRIPTION PART # QTY. 1 Bolt Lid Bracket Locknut Lift Hook Assembly A U-Clip Nut Locknut Washer Washer Hose *(Nine Feet Required) Locknut Locknut Elbow Side Rail A Float Support Bracket A Elbow Bolt Nut Fuel Tank Control Panel Elbow Cap Screw Hose Clamp Skid Foot A Vibration Pad Hose *(Nine Feet Required) Plug Isolation Plate A Washer Coupler Assembly Frame A Lockwasher Barb Fuel Hose *(Twelve Feet Required) Bolt Washer Hose Clamp Float Tank Bracket A Stud Barb Elbow Nut Oil Burner Bolt Elbow Barb Oil Nozzle Underbracket A Fuel Filter Pan Assembly Washer Fuel Filter (Replacement Only) Bolt Battery Box Bushing Float Tank (w/lid) Terminal Cover Screw Battery Screw (See ) N/A Sep Plug Strap *Order in One Foot Lengths 22 Valve Bolt Nut Clip A01 2 Copyright 2000, Mi-T-M Corporation 9

10 FRAME ASSEMBLY FOR HS-3005/3006-DMK0 OMHS BAR Copyright 2000, Mi-T-M Corporation 10

11 OMHS BAR FRAME ASSEMBLY FOR HS-3005/3006-DMK0 REF. DESCRIPTION PART # QTY QTY REF. DESCRIPTION PART # QTY QTY REF. DESCRIPTION PART # QTY QTY Bolt Float Strap (38") Lift Hook Assembly A Rod Bolt Washer Valve Locknut Locknut Nut Elbow Side Rail-Large Skid A Washer Hose *(Nine Feet Required) Sided Rail-Large Skid A Elbow Elbow Bolt Bolt Plug Control Panel Clip A Locknut Screw Hose *(Nine Feet Required) Skid Foot A Vibration Pad Hose Clamp Cap Isolation Plate (For HS-3005-DMKO) A Nut (See ) N/A Sep Fuel Tank Isolation Plate (For HS-3006-DMKO) A Washer Lockwasher Fuel Hose *(Twelve Feet Required) Float Tank Plug for 3005 only Hose Clamp Elbow Coupler Assembly for 3005 only Barb Bushing Barb for 3005 only Oil Burner Hose Barb Frame for A Oil Nozzle (For HS-3005-DMKO) Bolt Frame for A Oil Nozzle (For HS-3006-DMKO) Underbracket A Washer Pan Assembly Battery Box Cover Bolt Terminal Screw (See ) N/A Sep Cover (See ) N/A Sep Battery *Must Order in One Foot Lengths Copyright 2000, Mi-T-M Corporation 11

12 BURNER ASSEMBLY (4-0009) OMGEN JTR BURNER ASSEMBLY (4-0009) REF. # DESCRIPTION PART # QTY. 1 Head Mounting Gasket Flange Gasket Oil Nozzle for HS-2204-BMH1/CMH Oil Nozzle for HS-2505/3005-CMV Nozzle Line Assembly (Includes 7, 8) Electrode Kit Bulkhead Fitting Burner Housing Escutcheon Plate Fuel Line Fuel Pump Fuel Solenoid (120V) OMGEN JTR 14 Coupler Blower Wheel Motor (120V) Ignition Transformer (120V) Complete Burner Assembly (Inc. 1-17) Copyright 2000, Mi-T-M Corporation 12

13 FUEL PUMP (3-0020) & FUEL SOLENOID ( ) ASSEMBLY OMGEN JTR FUEL PUMP (3-0020) & FUEL SOLENOID ( ) ASSEMBLY REF. # DESCRIPTION PART # QTY. 1 Cord-Din Connector Base Plate (See ) N/A Sep. 1 3 Nut-Solenoid Piston Solenoid Coil (120V) Screw (See ) N/A Sep. 2 6 Piston Bolt Washer Elbow Fuel Line Plug Fuel Pump Body (See ) N/A Sep Cover Gasket Fuel Pump Strainer OMGEN JTR 15 Fuel Pump Cover Screw Solenoid Body (See ) N/A Sep. 1 Fuel Solenoid- 120V (Inc. 1-8, 17) Fuel Pump (Inc ) Copyright 2000, Mi-T-M Corporation 13

14 BOILER ASSEMBLY OMGEN JTR Copyright 2000, Mi-T-M Corporation 14

15 OMGEN JTR BOILER ASSEMBLY REF. # DESCRIPTION PART # QTY. 1 Nut Dome A Screw Insulation Donut Spacer Dome Insulation Retainer Bolt Edging *(Two Feet Required) Nut / U-Clip Outer Wrap Assembly for HS-3005-CMK0/DMK Outer Wrap Assembly for HS-3006-DMK Screw Insulation Blanket Washer Nut Shell for HS-3005-CMK0/DMK Shell for HS-3006-DMK Target Assembly (5") for HS-3005-CMK0/DMK Target Assembly (8") for HS-3006-DMK Coil Assy. for HS-3005-CMK0/DMK Coil Assemby for HS-3006-DMK Insulation Strip Donut Insulation Donut Insulation Pan *Must Order in One Foot Lengths Copyright 2000, Mi-T-M Corporation 15

16 ENGINE AND PUMP ASSEMBLY FOR HS-3005-CMK0/DMK0 OMHS JTR Copyright 2000, Mi-T-M Corporation 16

17 OMHS JTR ENGINE/PUMP ASSEMBLY FOR HS-3005-CMK0/DMK0 REF. # DESCRIPTION PART # QTY. REF. # DESCRIPTION PART # QTY. REF. # DESCRIPTION PART # QTY. 1 Locknut Belt-Engine/Generator Hose *(Three Feet Required) Washer for CMK Sheave-Engine Pump Foot Washer for DMK Bushing Bolt Bolt Key-Pump Clamp Exhaust Bracket A Washer Fuel Filter (Replacement Only) Locknut for CMK Locknut Sheave-Generator Locknut for DMK Pump Key-Generator Muffler Bushing Bushing Exhaust Tubing Elbow Generator Muffler Clamp (See ) N/A Sep Hose *(One Foot Required) Beltguard Assembly Exhaust Elbow Hose Clamp for CMK Isolation Plate A Engine Shaft Key Hose Clamp for DMK Locknut Bolt Elbow Washer Bolt Reducer Bolt Bushing Cross Barb Pump Sheave Nipple Valve Bolt Barb Elbow Pump/Engine Belt Tee Oil Plug Adaptor Lockwasher Bolt Engine-12.5 HP Diesel Washer Plate Tightener A Air Filter (Replacement Only) Hose *(Nine Feet Required) Pump Rails Oil Filter (Replacement Only) Hose Clamp Pump Tightener A Rectifier Elbow Washer Washer Rain Cap Bolt Fuel Hose *(Twelve Feet Required for DMK0) Manifold for Unloader Bolt Barb for DMK Nipple Bolt Elbow for DMK Unloader Pump Mount A Fuel Water Seperator for DMK Quick Connect Locknut Filter (Replacement Only) Quick Connect Throttle Control Oil Pressure Sensor for DMK Hose Edging *(One Foot Required) Elbow for DMK Thermoprobe Bolt Nipple for DMK Nipple Bolt Screw Tee Lockwasher Clamp Elbow Washer Water Temp. Sensor for DMK Pop-off Bracket Tightener Angle A Elbow Hose Clamp Beltguard A Hose Hose *(CMK0- Seven Feet Required. DMK0- Nine Feet Required.) Bolt Elbow Pressure Switch (22 Bar) Fuel Line Hose: *(CMK0- Six Feet Required. DMK0- Nine Feet Required.) Gasket Elbow Barb (See ) N/A Sep. 2 *Must Order in One Foot Lengths 38 Hose Fuel Pump Hose Lockwasher Copyright 2000, Mi-T-M Corporation 17

18 ENGINE AND PUMP ASSEMBLY FOR HS-3006-DMK0 OMHS JTR Copyright 2000, Mi-T-M Corporation 18

19 OMHS JTR ENGINE/PUMP ASSEMBLY FOR HS-3006-DMK0 REF. # DESCRIPTION PART # QTY. REF. # DESCRIPTION PART # QTY. REF. # DESCRIPTION PART # QTY. 1 Engine 16 HP Diesel Bushing Key w/ Generator Fuel Line Hose *(Nine Feet Required) Key-Pump Bushing Hose Clamp Washer Generator Air Intake (See ) N/A Sep Locknut Base Isolaton Plate A Air Intake Tubing Pump Rectifier (See ) N/A Sep. 1 6 Hose Clamp Bushing Clamp Hose-Radiator Elbow Lockwasher Locknut Hose *(One Foot Required) Fuel Hose *(Twelve Feet Required) Washer Elbow Barb Ring Gear Guard A Reducer Elbow Bolt Cross Fuel Water Separator Bolt Nipple Fuel Water Separator (Replacement Only) Bushing Barb Barb Sheave-Pump Tee A Fuel Line Hose *(Three Feet Required) Pump/Engine Belt Barb Hose Barb (See ) N/A Sep Bolt Bolt Fuel Pump Lockwasher Washer Washer Washer Plate Tightener A Locknut Hose *(Six Feet Required) Locknut Bolt Hose Clamp Pump Rails Oil Pressure Sensor Elbow Pump Tightener A Elbow Manifold for Unloader Washer Adapter Nipple Bolt Water Temp. Sensor Unloader Edging *(One Foot Required) Engine Shaft Key Quick Connect Bolt Reducer Quick Connect Bolt Engine Foot A Hose Bolt Bolt Thermoprobe Bolt Bolt Nipple Pump Mount A Hose Barb Tee Kill Cable Oil Drain Adapter Elbow Locknut Barb Pop-off Throttle Control Connector Hose Clamp Screw Plug Hose *(Nine Feet Required) Bolt Throttle Cable Clamp Pressure Switch (22 Bar) Lockwasher Screw Elbow Bracket Tightener Angle A Throttle Cable Connector Hose Beltguard A Elbow Hose Bracket (See ) N/A Sep Hose (3000 PSI) Engine/Generator Belt Bolt *Must Order in One Foot Lengths 40 Engine Sheave Sheave Copyright 2000, Mi-T-M Corporation 19

20 PUMP ASSEMBLY (3-0012) RD Copyright 2000, Mi-T-M Corporation 20

21 RD PUMP ASSEMBLY (3-0012) REF. # DESCRIPTION PART # QTY. REF. # DESCRIPTION PART # QTY. REF. # DESCRIPTION PART # QTY. 1 Hex Plug Seal Retainer Piston Rod Washer O-ring Connecting Rod Hex Plug Oil Seal Lockwasher Washer Bushing Bolt Valve Assy. (Includes 11-15) (See ) N/A Sep Bolt O-ring O-ring Cover Crankcase Cover Valve Plug Shim Bolt Bolt Oil Seal Plug Flatwasher O-ring Indicator Pump Manifold - Brass 20mm Bearing Connecting Rod O-ring (See ) N/A Sep Key Retaining Ring Valve Seat (See ) N/A Sep Crankshaft Crankcase Cover Valve Plate (See ) N/A Sep Crankshaft Lockwahser Valve Spring (See ) N/A Sep Oil Dip Stick Bolt Valve Cage (See ) N/A Sep Bolt Valve Kit (6 each of 11-15) Head Ring (See ) N/A Sep Washer Head Ring Kit (3 each of 16) Head Ring (See ) N/A Sep O-ring Packing Kit (3 each of 17, 18, 20) Stop Ring Packing (See ) N/A Sep Back Up Ring Packing Assy. (3 each of 16, 17, 18, 20, 22) Intermediate Ring Plunger Intermediate Retainer Kit (3 each 18, 19) Seal (See ) N/A Sep Washer Copyright 2000, Mi-T-M Corporation 21

22 UNLOADER ASSEMBLY ( & ) OMGEN / BAR UNLOADER ASSEMBLY ( & ) REF. # DESCRIPTION PART # QTY. 1 Bolt Hex Nut Bolt Lockwasher Upper Body Washer By-Pass Restrictor (8-0013) By-Pass Restrictor (8-0014) Spring Guide O-ring Spring Valve Seat Back-up Ring O-ring O-ring Flow Balancer for Flow Balancer for Nipple O-ring O-ring Middle Body O-ring Hex Plug O-ring O-ring Piston Assembly Seal OMGEN BAR 26 Spring Washer Seal Back-up Ring Lower Body Bolt Unloader Repair Kit (Inc. 9, 11, 13, 14, 17, 18, 20, 22-26, 28, 29) Unloader Orifice Kit (Inc. 7, 15, 16) for Unloader Orifice Kit (Inc. 7, 15, 16) for Copyright 2000, Mi-T-M Corporation 22

23 PRESSURE SWITCH ( ) BAR PRESSURE SWITCH ( ) REF. # DESCRIPTION PART # QTY. 1 Pressure Switch Screw N/A 4 3 Cover N/A 1 4 O-ring (See ) N/A Sep. 1 5 Micro Switch N/A 1 6 Retainer Clip N/A 1 7 Body N/A 1 8 O-ring (See ) N/A Sep. 2 9 Back-up Ring (See ) N/A Sep Piston N/A 1 11 Washer N/A 1 12 Sprng / BAR 13 Washer N/A 1 14 Plastic Housing N/A 1 15 O-ring (See ) N/A Sep Nut N/A 1 17 Wire Assembly N/A 1 O-ring Repair Kit (Inc. 4, 8, 9, 15) Copyright 2000, Mi-T-M Corporation 23

24 CONTROL PANEL FOR HS-3005-CMK0 OMHS JTR Copyright 2000, Mi-T-M Corporation 24

25 OMHS JTR CONTROL PANEL FOR HS-3005-CMK0 REF. # DESCRIPTION PART # QTY. REF. # DESCRIPTION PART # QTY. 1 Hose *(One Foot Required) Fuse Hose Clamp Toggle Switch Barb Thermostat Bushing Grommet Water Strainer Quick Connect Nipple Washer Washer Garden Hose Gasket Outlet Manifold Swivel Plug Thermostat Knob Thermowell Socket Toggle Switch Boot Thermometer ( F) Hourmeter Swivel Connect Switch Key Hose Screw Hose Washer Gauge ( PSI) Gauge Panel Hex Nut Foam Seal *(Four Feet Required) Detergent Strainer Box Hose-Detergent *(Six Feet Required) Decal-Temperature Hose Clamp Decal-Head Pressure Barb Decal-Adjustable Control Needle Valve Decal-Panel "C" Version Hose *(One Foot Required) Decal-Detergent Mounting Kit Decal-Nozzle Lockwasher Decal-Nozzle Elbow Decal-Nozzle Hose *(One Foot Required) Decal-Nozzle Elbow Decal-Outlet Control Panel Decal-Water Inlet Glow Lamp *Must Order in One Foot Lengths Copyright 2000, Mi-T-M Corporation 25

26 CONTROL PANEL FOR HS-3005/3006-DMK0 OMPMP JTR Copyright 2000, Mi-T-M Corporation 26

27 OMHS JTR CONTROL PANEL FOR HS-3005/3006-DMK0 REF. # DESCRIPTION PART # QTY. REF. # DESCRIPTION PART # QTY. 1 Hose *(One Foot Required) Control Panel Hose Clamp Gauge ( PSI) Barb Grommet Bushing Toggle Switch Boot Water Strainer Thermostat Nipple Thermostat Knob Washer Gauge Panel for A Garden Hose Swivel Gauge Panel for A Garden Hose Gasket Hourmeter Quick Connect Indicator Light Washer Switch Key Outlet Manifold Oil Pressure Gauge Elbow Ammeter Hose (24") Water Temperature Gauge Thermowell Socket Screw Thermometer ( F) Washer Swivel Connect Foam Seal *(Four Feet Required) Hose Box Nut Locknut for Mount (w/reference #35) N/A 2 53 Timer (w/engine for 3006) N/A 1 21 Detergent Strainer Decal-Temperature Hose-Detergent *(Six Feet Required) Decal-Outlet Pressure Hose Clamp Decal-Head Pressure Barb Decal-Adjustable Control Needle Valve Decal-Panel "D" Version Hose *(One Foot Required) Decal-Detergent Mounting Kit Decal-Nozzle Lockwasher Decal-Nozzle Elbow Decal-Nozzle Hose *(One Foot Required) Decal-Nozzle Elbow Decal-Outlet Toggle Switch Decal-Inlet Glow Lamp *Must Order in One Foot Lengths 34 Fuse Copyright 2000, Mi-T-M Corporation 27

28 WATER STRAINER ( ) WATER STRAINER ( ) OMGEN JTR OMGEN JTR REF. # DESCRIPTION PART # QTY. 1 Strainer Cap Strainer Gasket Strainer Screen Strainer Bowl Copyright 2000, Mi-T-M Corporation 28

29 DETERGENT INJECTOR ( ) BAR DETERGENT INJECTOR ( ) REF. # DESCRIPTION PART # QTY. 1 O-ring (Replacement) Quick Connect Socket Quick Connect Plug Orfice 2.1mm Injector Body-Brass N/A 1 6 Spring (Must order ) N/A Sep. 1 7 Ball (Must order ) N/A Sep. 1 8 O-ring (Must order ) N/A Sep. 1 9 Piston Retainer Spring O-ring (Must order ) N/A Sep Adjustable Shutter Barb Adjusting Knob-Black Plastic BAR 14 Hose *(Six Feet Required) Detergent Strainer Detergent Injector Complete (Includes 4-13) Repair Kit (Includes 6-8, 11) *Must Order in One Foot Lengths Copyright 2000, Mi-T-M Corporation 29

30 GUN WAND ( ) & DUAL LANCE ( & ) ASSEMBLY OMGEN JTR Copyright 2000, Mi-T-M Corporation 30

31 0MGEN218-HS3005/HS JTR GUN/WAND ( ) & DUAL LANCE ( & ) ASSEMBLY REF. # DESCRIPTION PART # QTY. REF. # DESCRIPTION PART # QTY. 1 Quick Connect Plug Piston Gun/Lance Assembly (Includes 3-21) Back-up Ring Pipe Assembly O-ring Plastic Housing Upper Protector Screw Screw Housing Lower Protector Gun Repair Kit Body Plug Lance w/protective Cover Cover Hex Nut Trigger Safety Lock-off Pipe Clamp Trigger Pin Screw Pipe Assembly Nipple Adaptor Nozzle Protector Pipe Detergent Nozzle Guard Lance (Right Side) Quick Connect Socket Screw Nozzle for HS Guard Lance (Left Side) Nozzle for HS Plug Nozzle for HS Screw Nozzle for HS Spacer Nozzle for HS Lance Holder (See Kit ) N/A Sep. 1 - Nozzle for HS Dual Lance Assembly (Inc ) Nozzle for HS Handle Plug Nozzle for HS Hex Nut Hose Assembly (Inc ) Handle Quick Connect Plug Washer Hose Hex Nut Quick Connect Socket Hex Adaptor Lance Assembly (13-21) O-ring O-ring Kit (Includes 29, 31, 32) Copyright 2000, Mi-T-M Corporation 31

32 WIRING DIAGRAM FOR HS-3005-CMK0 OMHS028D JTR Copyright 2000, Mi-T-M Corporation 32

33 OMHS028D JTR WIRING DIAGRAM FOR HS-3005-CMK0 REF. # DESCRIPTION PART # QTY. REF. # DESCRIPTION PART # QTY. 1 Straight Connect F Ring Terminal Elbow Connect G Ring Terminal Flex Conduit *(Twelve Feet Required) H Ring Terminal Connector I Ring Terminal Wrap *(Four Feet Required) Bl Blue Wire *(Seven Feet Required) A Ring Terminal Gr Green Wire *(Eight Feet Required) B Q.C. Terminal Bk Black Wire *(Twenty-one Feet Required) C Q.C. Terminal Wh White Wire *(Sixteen Feet Required) D Fork Terminal Y Yellow Wire *(Twenty Feet Required) E Crimped Wire Splice R Red Wire *(Twenty Feet Required) *Must Order in One Foot Lengths Copyright 2000, Mi-T-M Corporation 33

34 WIRING SCHEMATIC FOR HS-3005-CMK0 OMHS028S JTR Copyright 2000, Mi-T-M Corporation 34

35 OMHS028S JTR WIRING SCHEMATIC FOR HS-3005-CMK0 REF. # DESCRIPTION PART # GEN Generator SW1 Starter Switch SW2 Switch SW3 Pressure Switch HR1 Hour Meter T1 Thermostat TP1 Thermoprobe (See ) N/A Sep. F1 Fuse GL Glow Lamp FP Fuel Pump S1 Starter (w/engine) N/A R1 Rectifier (w/engine) N/A B1 Battery Copyright 2000, Mi-T-M Corporation 35

36 WIRING DIAGRAM FOR HS-3005/3006-DMK0 OMHS029D JTR Copyright 2000, Mi-T-M Corporation 36

37 OMHS029D JTR WIRING DIAGRAM FOR HS-3005/3006-DMK0 REF. # DESCRIPTION PART # QTY. REF. # DESCRIPTION PART # QTY. 1 Straight Connect F Ring Terminal Elbow Connect G Ring Terminal Flex Conduit *(Twelve Feet Required) H Ring Terminal Connector Bl Blue Wire *(Seven Feet Required) Wrap *(Four Feet Required) Gr Green Wire *(Eight Feet Required) A Ring Terminal Bk Black Wire *(Twenty-three Feet Required) B Q.C. Terminal Wh White Wire *(Sixteen Feet Required) C Q.C. Terminal Y Yellow Wire *(Twenty Feet Required) D Fork Terminal R Red Wire *(Twenty Feet Required) E Crimped Wire Splice *Must Order in One Foot Lengths Copyright 2000, Mi-T-M Corporation 37

38 WIRING SCHEMATIC FOR HS-3005/3006-DMK0 OMHS029S JTR Copyright 2000, Mi-T-M Corporation 38

39 OMHS029S JTR WIRING SCHEMATIC FOR HS-3005/3006-DMK0 REF. # DESCRIPTION PART # REF. # DESCRIPTION PART # GEN Generator S1 Starter (w/engine) N/A SW1 Starter Switch R1 Rectifier (w/engine) N/A SW2 Switch B1 Battery SW3 Switch ALT Engine Alternator (w/engine) N/A SW4 Pressure Switch WT Water Temperature Gauge HR1 Hour Meter AM Ammeter T1 Thermostat OP Oil Pressure Gauge TP1 Thermoprobe (See ) N/A Sep. GP Glow Plug (w/engine) N/A F1 Fuse WS Water Temperature Sensor GL Glow Lamp OS Oil Pressure Sensor FP Fuel Pump Copyright 2000, Mi-T-M Corporation 39

40 WHEEL KIT (AW-5540/ ) AW5540/ JTR Copyright 2000, Mi-T-M Corporation 40

41 AW JTR WHEEL KIT (AW-5540/ ) REF. # DESCRIPTION PART # QTY. 1 Handle Handle Grip Washer Bolt Wheel Underbracket Washer Locknut Wheel Jam Nut Bolt Turn Disk-Bottom Assembly Turn Disk-Top Assembly Frame Locknut Brace Locknut Gripper Clip Screw Bolt Washer Bolt Lockwasher Locknut Underbracket (AW ) for HS-3005-CMK Underbracket (AW ) for HS-3005/3006-DMK Copyright 2000, Mi-T-M Corporation 41

42 STEAM OPTION (HX-0017) PDHX JTR Copyright 2000, Mi-T-M Corporation 42

43 STEAM OPTION (HX-0017) PDHX JTR REF. # DESCRIPTION PART # QTY. 1 Hose *(Two Feet Required) Clamp Barb Valve Tee Elbow Valve Washer Pressure Switch Hose Decal-Open for Steam Decal-Steam Decal-Instruction Steam Nozzle Connector Lance Hose (Fifty Feet Required) Quick Connect Gun Stub Connect *Must Order in One Foot Lengths Copyright 2000, Mi-T-M Corporation 43

44 STEAM OPTION (HX-0017) WIRING DIAGRAM FOR HS-3005-CMK0 PDHS034D JTR Copyright 2000, Mi-T-M Corporation 44

45 PDHS034D JTR STEAM OPTION (HX-0017) WIRING DIAGRAM FOR HS-3005-CMK0 REF. # DESCRIPTION PART # QTY. REF. # DESCRIPTION PART # QTY. 1 Straight Connect D Fork Terminal Elbow Connect E Crimped Wire Splice Flex Conduit *(Twelve Feet Required) Bl Blue Wire *(Seven Feet Required) Connector Gr Green Wire *(Eight Feet Required) Wrap *(Four Feet Required) Bk Black Wire *(Twenty-one Feet Required) A Ring Terminal Wh White Wire *(Sixteen Feet Required) B Q.C. Terminal Y Yellow Wire *(Twenty Feet Required) C Q.C. Terminal R Red Wire *(Twenty Feet Required) *Must Order in One Foot Lengths Copyright 2000, Mi-T-M Corporation 45

46 STEAM OPTION (HX-0017) WIRING SCHEMATIC FOR HS-3005-CMK0 PDHS034S JTR Copyright 2000, Mi-T-M Corporation 46

47 PDHS034S JTR STEAM OPTION (HX-0017) WIRING SCHEMATIC FOR HS-3005-CMK0 REF. # DESCRIPTION PART # SW1 Starter Switch SW2 Switch SW3 Pressure Switch (Steam Switch) HR1 Hour Meter T1 Thermostat TP1 Thermoprobe (See ) N/A Sep. F1 Fuse GL Glow Lamp Copyright 2000, Mi-T-M Corporation 47

48 STEAM OPTION (HX-0017) WIRING DIAGRAM FOR HS-3005/3006-DMK0 PDHS031D JTR Copyright 2000, Mi-T-M Corporation 48

49 PDHS031D JTR STEAM OPTION (HX-0017) WIRING DIAGRAM FOR HS-3005/3006-DMK0 REF. # DESCRIPTION PART # QTY. REF. # DESCRIPTION PART # QTY. 1 Straight Connect E Crimped Wire Splice Elbow Connect H Ring Terminal Flex Conduit *(Twelve Feet Required) Bl Blue Wire *(Seven Feet Required) Connector Gr Green Wire *(Eight Feet Required) Wrap *(Four Feet Required) Bk Black Wire *(Twenty-one Feet Required) A Ring Terminal Wh White Wire *(Sixteen Feet Required) B Q.C. Terminal Y Yellow Wire *(Twenty Feet Required) C Q.C. Terminal R Red Wire *(Twenty Feet Required) D Fork Terminal *Must Order in One Foot Lengths Copyright 2000, Mi-T-M Corporation 49

50 STEAM OPTION (HX-0017) SCHEMATIC DIAGRAM FOR HS-3005/3006-DMK0 PDHS031S JTR Copyright 2000, Mi-T-M Corporation 50

51 PDHS031S JTR STEAM OPTION (HX-0017) SCHEMATIC DIAGRAM FOR HS-3005/3006-DMK0 REF. # DESCRIPTION PART # REF. # DESCRIPTION PART # SW1 Starter Switch TP1 Thermoprobe (See ) N/A Sep. SW2 Switch F1 Fuse SW3 Switch GL Glow Lamp SW4 Pressure Switch (Steam Switch) WT Water Temperature Gauge HR1 Hour Meter AM Ammeter T1 Thermostat OP Oil Pressure Gauge Copyright 2000, Mi-T-M Corporation 51

52 CAD CELL ASSEMBLY HX JTR Copyright 2000, Mi-T-M Corporation 52

53 PDHX JTR CAD CELL ASSEMBLY REF. # DESCRIPTION PART # QTY. 1 Burner (120V) Pad (See ) N/A Sep. 1 3 Cad Cell Flame Detector (120V) Screw (See ) N/A Sep. 1 Copyright 2000, Mi-T-M Corporation 53

54 CAD CELL ASSEMBLY WIRING DIAGRAM FOR HS-3005-CMK0 PDHX035D JTR Copyright 2000, Mi-T-M Corporation 54

55 CAD CELL ASSEMBLY WIRING DIAGRAM FOR HS-3005/3006-DMK0 PDHX034W JTR Copyright 2000, Mi-T-M Corporation 55

56 CAD CELL/STEAM COMBINATION WIRING DIAGRAM FOR HS-3005-CMK0 PDHX037D JTR Copyright 2000, Mi-T-M Corporation 56

57 PDHX037D JTR CAD CELL/STEAM COMBINATION WIRING DIAGRAM FOR HS-3005-CMK0 REF. # DESCRIPTION PART # QTY. REF. # DESCRIPTION PART # QTY. 1 Straight Connect D Fork Terminal Elbow Connect E Crimped Wire Splice Flex Conduit *(Twelve Feet Required) Bl Blue Wire *(Twelve Feet Required) Connector Gr Green Wire *(Eight Feet Required) Wrap *(Four Feet Required) Bk Black Wire *(Twenty-one Feet Required) A Ring Terminal Wh White Wire *(Sixteen Feet Required) B Q.C. Terminal Y Yellow Wire *(Twenty-six Feet Required) C Q.C. Terminal R Red Wire *(Twenty Feet Required) *Must Order in One Foot Lengths Copyright 2000, Mi-T-M Corporation 57

58 CAD CELL/STEAM COMBINATION WIRING SCHEMATIC FOR HS-3005-CMK0 PDHX037S JTR Copyright 2000, Mi-T-M Corporation 58

59 PDHX037S JTR CAD CELL/STEAM COMBINATION WIRING SCHEMATIC FOR HS-3005-CMK0 REF. # DESCRIPTION PART # GEN Generator SW1 Starter Switch SW2 Switch SW3 Pressure Switch SW4 Steam Pressure Switch HR1 Hour Meter T1 Thermostat TP1 Thermoprobe (See ) N/A Sep. F1 Fuse GL Glow Lamp FD Flame Detector CC Cadium Cell Copyright 2000, Mi-T-M Corporation 59

60 CAD CELL/STEAM COMBINATION WIRING DIAGRAM FOR HS-3005/3006-DMK0 PDHS036D JTR Copyright 2000, Mi-T-M Corporation 60

61 PDHS036D JTR CAD CELL/STEAM COMBINATION WIRING DIAGRAM FOR HS-3005/3006-DMK0 REF. # DESCRIPTION PART # QTY. REF. # DESCRIPTION PART # QTY. 1 Straight Connect F Ring Terminal Elbow Connect G Ring Terminal Flex Conduit *(Twelve Feet Required) H Ring Terminal Connector Bl Blue Wire *(Twelve Feet Required) Wrap *(Four Feet Required) Gr Green Wire *(Eight Feet Required) A Ring Terminal Bk Black Wire *(Twenty-three Feet Required) B Q.C. Terminal Wh White Wire *(Sixteen Feet Required) C Q.C. Terminal Y Yellow Wire *(Twenty-six Feet Required) D Fork Terminal R Red Wire *(Twenty Feet Required) E Crimped Wire Splice *Must Order in One Foot Lengths Copyright 2000, Mi-T-M Corporation 61

62 CAD CELL/STEAM COMBINATION WIRING SCHEMATIC FOR HS-3005/3006-DMK0 PDHS036S JTR Copyright 2000, Mi-T-M Corporation 62

63 PDHS036S JTR CAD CELL/STEAM COMBINATION WIRING COMBINATION FOR HS-3005/3006-DMK0 REF. # DESCRIPTION PART # REF. # DESCRIPTION PART # SW1 Starter Switch F1 Fuse SW2 Switch GL Glow Lamp SW3 Switch WT Water Temperature Gauge SW4 Pressure Switch AM Ammeter SW5 Steam Pressure Switch OP Oil Pressure Gauge HR1 Hour Meter FD Flame Detector T1 Thermostat CC Cadium Cell TP1 Thermoprobe (See ) N/A Sep. Copyright 2000, Mi-T-M Corporation 63

64 Copyright 2000, Mi-T-M Corporation 64