AC-1500EH: AC-2000EH:

Size: px

Start display at page:

Download "AC-1500EH: AC-2000EH:"

James Ford
5 years ago
Views:

1 AC-1500EH AC-2000EH High-Pressure Washer PUMP OIL GRADE: SAE20 or 30 Non-Detergent PUMP OIL CAPACITY: 9.81 oz FUEL NOZZLE: AC-1500EH: B Delavan AC-2000EH: B Delavan JD-KLEEN ( ) 1 BTU INPUT: AC-1500EH: AC-2000EH: PRESSURE NOZZLE SIZE: AC-1500EH: 3.0 AC-2000EH: ,000 / hour 207,000 / hour

2 This Parts Listing has been compiled for your benefit. You can be assured your John Deere hot water pressure washer was constructed and designed with quality and performance in mind. Each component has been rigorously tested to insure the highest level of acceptance. The contents of this parts listing are based on the latest product information available at the time of publication. John Deere reserves the right to make changes in price, color, materials, equipment, specifications or models at any time without notice. WARNING THIS IS A PROFESSIONAL HIGH PRESSURE, HOT WATER PRESSURE WASHER. CAUTION SHOULD BE OBSERVED WHEN USING OR REPAIRING THIS UNIT! READ AND FOLLOW THE SAFETY WARNINGS LISTED BELOW BEFORE ATTEMPTING ANY REPAIRS ON THIS PRESSURE WASHER! SAFETY WARNINGS 1. NEVER alter or modify the equipment. Be sure any accessory items and system components being used will withstand the pressure developed. Use only genuine John Deere parts for repair of your pressure washer. Failure to do so can cause hazardous operating conditions and will VOID warranty. 2. NEVER make adjustments on machinery while the unit is connected to the power source. Turning over the machinery by hand during adjustment or cleaning might start the machinery, causing serious injury to the operator. 3. Know how to stop and bleed pressures quickly. Be thoroughly familiar with controls. 4. Before servicing the unit, turn unit off, relieve the water pressure and allow the unit to cool down. Do not make repairs while the unit is running. Service in a clean, dry, flat area. Block the wheels to prevent the unit from moving. Be especially careful to properly dispose of any flammable materials. 5. After testing the machine, DO NOT leave the pressurized unit unattended. Shut off the unit and release trapped pressure before leaving. 2

3 TABLE OF CONTENTS SPECIFICATIONS...4 NOTES...5 FLOW CHART...6 GENERAL THEORY OF OPERATION...7 DECAL PLACEMENT...8 FRAME ASSEMBLY...10 MOTOR/PUMP ASSEMBLY...12 FLOAT TANK ASSEMBLY...14 PUMP ASSEMBLY ( & )...16 UNLOADER (8-0470)...18 PRESSURE SWITCH ( )...20 COIL DRAIN PLUG ( )...21 HEAT EXCHANGER/BLOWER MOTOR...22 BOILER ASSEMBLY...24 GUN / WAND / HOSE ASSEMBLY...26 DUAL LANCE ASSEMBLY ( )...28 FUEL TANK...30 FUEL PUMP (3-0020)...31 FUEL SOLENOID ( )...31 ELECTRIC BOX ASSEMBLY FOR AC-1500EH...32 ELECTRIC BOX ASSEMBLY FOR AC-2000EH...34 WIRE SCHEMATIC FOR AC-1500EH...36 WIRE DIAGRAM FOR AC-1500EH...37 WIRE SCHEMATIC FOR AC-2000EH...38 WIRE DIAGRAM FOR AC-2000EH...39 ACCESSORIES...41 OPTION- STEAM PLUMBING (HX-0232 / HX-0240)...42 OPTION- ADJUSTABLE THERMOSTAT (HX-0233 AND HX-0235)...44 OPTION- CONTROL PANEL (HX-0231, HX-0242)...46 OPTION- ELECTRIC PANEL...48 OPTION- AUTO START / STOP PLUMBING...50 WIRE SCHEMATIC AUTO START STOP (AC-1500EH)...52 WIRE DIAGRAM AUTO START STOP (AC-1500EH)...53 WIRE SCHEMATIC AUTO START STOP (AC-2000EH)...54 WIRE DIAGRAM AUTO START STOP (AC-2000EH)...55 WIRE SCHEMATIC AUTO START / STOP AND STEAM (AC-1500EH)...56 WIRE DIAGRAM AUTO START / STOP AND STEAM (AC-1500EH)...57 WIRE SCHEMATIC AUTO START / STOP AND STEAM (AC-2000EH)...58 WIRE DIAGRAM AUTO START / STOP AND STEAM (AC-2000EH)

4 SPECIFICATIONS MODEL NUMBER AC-1500EH AC-2000EH Operating Pressure (PSI/Bar): 1500/103 (+/- 5%) 2000/138 (+/- 5%) Water Volume (GPM/Ipm): 2.0/ 7.6 (+/- 5%) 2.8/ 10.6 (+/- 5%) Outlet Water Temperature (F/C) 140 F / 60 C (+/- 10 F) rise above inlet ambient (210 F / 99 C maximum) Motor: TEFC Horsepower Phase Single Voltage Amperage High Pressure Pump: Direct Driven, Oil Bath, Triplex Piston Oil Type Mi-T-M Pump Oil #AW Oil Capacity (oz. / liter) 9.81 / 0.29 Plungers Ceramic Manifold Forged Brass Valves Stainless Steel Unloader Preset Heat Dump Valve Relieves heated water during unloader bypass stage Detergent Injector: Adjustable High Pressure Burner Fuel System: Fuel Type No. 1 or No. 2 Fuel Oil, Diesel or Kerosene Fuel Capacity (Gal./liters) 4.46 / 16.9 Fuel Filter/ Water Seperator Spin On (10 Micron) Filter / E-Z Water Drain Fuel Pump Two Line, Single Stage Fuel Pressure (PSI / BAR) 145 / 10 Fuel Nozzle B Delavan B Delavan Fuel Consumption (GPH / LPH) 1.21 / 4.58 Cont. Burner 1.48 / 5.54 Cont. Burner Voltage Amps Heat Exchanger: Vertical, Top Fired, Dual Spiral Coil BTU Input 169, ,000 Efficiency 86% with #2 Fuel Oil / Diesel Smoke Density 0-3 per ASTM D2156 Controls: On/ Off Switch Industrial grade cam switch Pressure Switch Shuts off burner fuel supply upon trigger release High Limit Switch Shuts off burner fuel supply when outlet water temp. exceeds 210 F / 99 C Fuel Solenoid: 120 Volt 240 Volt Safety Relief: Relieves excess system pressure Unit Net Weight (Lbs/Kg) 299 / / 143 Unit Shipping Weight (Lbs/Kg) 422 / / 199 Unit Net Dimensions (In/Cm) 43L x 29.5W x 36.5H / 109.5L x 75W x 93H Unit Shipping Dimensions (In/Cm) 46.5L x 31.5W x 48.5H / 118L x 80W x 123H 4

5 NOTES 5

6 FLOW CHART HSE WATER/FUEL FLOW DIAGRAM 6

7 GENERAL THEORY OF OPERATION WATER FLOW: Connect a pressurized water source to the INLET GARDEN HOSE CONNECTION (1) and turn on the water supply. The water will flow into the FLOAT TANK (2). The water then travels into the TRIPLEX HIGH PRESSURE PUMP (3) which has an UNLOADER (4) that bypasses the water when the trigger gun is closed. To protect the pump from heated water during this bypass stage, a HEAT DUMP VALVE (5) will open at 140 F/60 C allowing the heated water to escape. The Heat Dump Valve automatically resets when the water cools. The PRESSURE SWITCH (6) controls the fuel supply to the burner. When using detergents, the solution passes through the DETERGENT STRAINER (7) located on the DETERGENT HOSE (8). The detergent solution then travels into the ADJUSTABLE LOW PRESSURE DETERGENT INJECTOR (9). From there, the water may be allowed to flow out of the DRAIN PLUG (10) or through the HEAT EXCHANGER INLET (11) where it is heated when the burner is on. As the water exits the HEAT EXCHANGER OUTLET (12), it enters a safety system which protects the operator from danger. The safety system contains a HIGH TEMPERATURE LIMIT SWITCH (13) which senses the water temperature and shuts off the fuel supply to the burner if it gets too hot. If the unloader fails to by pass the water or the burner remains on when the trigger gun is closed, the SAFETY RELIEF (15) will relieve and allow water to exit safely. The heated water then flows through the HIGH PRESSURE HOSE (16) and to the TRIGGER GUN ASSEMBLY (17) which allows the operator to control the water spray. When the trigger gun is open, the water flows through the ADJUSTABLE PRES- SURE DUAL LANCE (18) and exits the NOZZLE (19). FUEL FLOW: The Fuel Pump draws fuel from the FUEL TANK (20) through a replaceable FUEL FILTER/WATER SEPARA- TOR (21) and into the FUEL PUMP (22). Fuel exits the fuel pump, into a FUEL SOLENOID VALVE (23) which controls fuel flow to the FUEL NOZZLE (24) where it ignites and burns in the heat exchanger. 7

8 DECAL PLACEMENT HSE SMALL - DECAL PLACEMENT_JOHN DEERE ALC 8

9 HSE SMALL - DECAL PLACEMENT_JOHN DEERE ALC DECAL PLACEMENT ITEM DESCRIPTION PART # QTY 1 DECAL - CAUTION: RISK OF FIRE (SEE ) N/A 1 2 DECAL - CAUTION: RISK OF INJURY (SEE ) N/A 1 3 DECAL - OPERATIONS (SEE ) N/A 1 4 DECAL- HSE SM ELECTRIC BOX COVER N/A 1 5 DECAL - HOT SURFACES (SEE ) N/A 1 6 DECAL - MARKETING (2003) DECAL - AC-1500EH (1502) DECAL - WARNING: RISK OF EXPLOSION (SEE ) N/A 1 8 DECAL - DATA PLATE DECAL - COIL DRAIN (SEE ) N/A 1 10 DECAL - CHEMICAL VALVE (SEE ) N/A 1 11 DECAL- LEAPING DEER DECAL SET - ENGLISH/FRENCH

10 FRAME ASSEMBLY HSE SMALL - UNIT ASSEMBLY_FLOAT TANK RJA 10

11 HSE SMALL - SMALL UNIT ASSEMBLY_FLOAT TANK JD RJA FRAME ASSEMBLY ITEM DESCRIPTION PART # QTY 1 ELECTRIC BOX ASSEMBLY N/A 1 2 ELECTRIC CORD W/ GFCI - 120V / 20A (1502) ELECTRIC CORD W/ GFCI - 240V / 20A (2003) MOTOR/PUMP ASSEMBLY N/A 1 4 BOLT WASHER LOCKNUT BOLT BOLT PUSH/PULL TOGGLE CLAMP LOCKWASHER LOCKNUT HOSE CLIP BOLT FUEL HOSE FUEL TANK ASSEMBLY N/A 1 16 AXLE WHEEL COLLAR BOLT BOLT CORD HANGER A FLOAT TANK ASSEMBLY N/A 1 23 BOLT DETERGENT VALVE HOSE *(FOUR FEET REQUIRED) GROMMET FRONT PANEL A HEAT EXCHANGER/BLOWER MOTOR ASSEMBLY N/A 1 *MUST ORDER IN ONE FOOT LENGTHS 11

12 MOTOR/PUMP ASSEMBLY HSE SMALL-MOTOR PUMP ASSY (GEN) CH 12

13 HSE SMALL- MOTOR PUMP ASSY JOHN DEERE (GEN) CH MOTOR PUMP ASSEMBLY ITEM DESCRIPTION PART # QTY 1 MOTOR ASSEMBLY - 2.0HP (INC 2-12) (AC-1500EH) MOTOR ASSEMBLY - 4.0HP (INC 2-12) (AC-2000EH) CORD *(TWO FEET REQUIRED) STRAIN RELIEF CIRCUIT BREAKER BOOT BOLT MOTOR CAPACITOR BOX A CIRCUIT BREAKER - 25A CAPACITER - RUN (AC-2000EH) CAPACITER - RUN (AC-1500EH) CAPACITER - START (AC-2000EH) CAPACITER - START (AC-1500EH) STRAP O-RING MOTOR 4.0HP (AC-2000EH) N/A 1 - MOTOR 2.0 HP (AC-1500EH) N/A 1 13 KEY PRESSURE SWITCH ELBOW PUMP (AC-2000EH) PUMP (AC-1500EH) LOCKWASHER BOLT THERMAL RELIEF VALVE UNLOADER HOSE BARB HOSE *(XXXX REQUIRED) ELBOW HIGH PRESSURE HOSE HOSE *(TWO FEET REQUIRED) HOSE CLAMP ELBOW *MUST ORDER IN ONE FOOT LENGTHS 13

14 FLOAT TANK ASSEMBLY FUEL FILTER ORIENTATION 1 THREADED HOLE INLET PORT OUTLET PORT " 6 7 HSE SMALL - FLOAT TANK ASSY JDK TO FUEL PUMP TO PUMP 15 1/2" TO FUEL TANK

15 HSE SMALL - FLOAT TANK ASSY JOHN DEERE JDK FLOAT TANK ASSEMBLY ITEM DESCRIPTION PART # QTY 1 FLOAT TANK LID FLOAT VALVE ELBOW HOSE BARB HOSE *(TWO FEET REQUIRED) HOSE BARB BOLT BRACKET A SWIVEL FILTER SCREW FLOAT TANK BRACKET A FUEL HOSE NIPPLE FUEL FILTER / WATER SEPERATOR ELBOW FUEL FILTER BRACKET A HOSE BARB O-RING FLOAT TANK NUT STRAINER *MUST ORDER IN ONE FOOT LENGTHS 15

16 PUMP ASSEMBLY ( & ) & CH 16

17 3-0071_ CH PUMP ASSEMBLY ( & ) REF. # DESCRIPTION PART # QTY. REF. # DESCRIPTION PART # QTY. 1 Crankcase Nut Plug Washer O-ring Plunger- Ceramic Drip Pan O-ring Oil Seal Back-up Ring Plug Washer Manifold- Brass Conecting Rod Lockwasher Crankcase Cover Bolt Bolt O-ring (See ) See Kit 6 35 Cover O-ring Valve Seat (See ) See Kit 6 36 Connecting Rod Valve Plate (See ) See Kit 6 37 Piston Guide Valve Spring (See ) See Kit 6 38 Bolt Valve Cage (See ) See Kit 6 39 Lockwasher O-ring Flange Valve Plug Lockwasher Valve Assembly (See ) See Kit 6 42 Bolt Head Ring (See and ) See Kit 3 43 Bearing Spacer V-packing (See and ) See Kit 3 44 O-ring V-packing Retainer (See ) Oil Seal O-ring (See and ) Snap Ring O-ring (See and ) Ball Bearing Oil Level Indicator Crankshaft (3-0071) Bearing Crankshaft (3-0168) Oil Dip Stick REPLACEMENT KITS KIT # DESCRIPTION ITEMS # OF ASSEMBLIES # OF CYLINDERS KIT - VALVES 10-14, KIT - V-PACKING 18, 19, 21, KIT - PACKING ASSEMBLY

18 UNLOADER (8-0470) CH 18

19 CH UNLOADER (8-0470) REF. # DESCRIPTION PART # QTY. REF. # DESCRIPTION PART # QTY. 1 Adjusting Knob N/A 16 Banjo Connector Adjusting Cap Body N/A 1 3 Spring Valve/Ball Assembly Spring Retainer Bypass Seat Piston Stem O-ring Back-up Ring Bypass Fitting N/A 1 7 O-ring N/A 1 22 O-ring Set Screw Banjo Connector Locknut Bypass Banjo Fitting N/A 1 10 Piston Retainer O-ring O-ring N/A 3 26 Flow Balancer O-ring N/A 1 27 Spring Back-up Ring Outlet Fitting Washer Unloader Complete (Includes 1-28) Washer

20 PRESSURE SWITCH ( ) BAR PRESSURE SWITCH ( ) REF. # DESCRIPTION PART # QTY. 1 Pressure Switch Screw N/A 4 3 Cover N/A 1 4 O-ring (See ) N/A Sep. 1 5 Micro Switch N/A 1 6 Retainer Clip N/A 1 7 Body N/A 1 8 O-ring (See ) N/A Sep. 2 9 Back-up Ring (See ) N/A Sep Piston N/A 1 11 Washer N/A & BAR 12 Spring Washer N/A 1 14 Plastic Housing N/A 1 15 O-ring (See ) N/A Sep Nut N/A 1 17 Wire Assembly N/A 1 O-ring Repair Kit (Inc. 4, 8-9, 15)

21 COIL DRAIN PLUG ( ) BAR COIL DRAIN PLUG ( ) REF. # DESCRIPTION PART # QTY. 1 Bolt Retaining Cable Snap Ring BAR 4 Hand Wheel Plug Back-up Ring O-ring

22 HEAT EXCHANGER/BLOWER MOTOR HSE SMALL - HEAT EXCHANGER_BLOWER MOTOR ASSY CH 22

23 HSE SMALL-HEAT EXCHANGER _BLOWER MOTOR ASSY CH HEAT EXCHANGER ITEM DESCRIPTION PART # QTY 1 QC SOCKET PIPE NIPPLE PRESSURE RELIEF VALVE OUTLET CONNECTOR HI LIMIT SWITCH ELBOW ADAPTER DRAIN PLUG ASSEMBLY STREET TEE HIGH PRESSURE HOSE NUT ELBOW FUEL HOSE BOLT FUEL HOSE ELBOW FUEL PUMP COUPLER (W/ BLOWER MOTOR) BLOWER MOTOR - 120V (1502) BLOWER MOTOR - 240V (2003) SET SCREW (W/ BLOWER FAN) FAN/ BLOWER CORD BUSHING FUEL SOLENOID ELBOW

24 BOILER ASSEMBLY HSE_HSP SMALL B HSE_HSP SMALL - BOILER ASSY RJA 24

25 HSE_HSP SMALL BOILER ASSEMBLY JD RJA BOILER ASSEMBLY ITEM DESCRIPTION PART # QTY 1 NUT PLUG AIR DIVERTER STEM A STAR WASHER NUT AIR DIVERTER A BOLT FRAME A INSULATION WASHER HEAT EXCHANGER COIL EXHAUST CHIMNEY ELECTRODE ASSEMBLY - NO WIRES (INC 4, 5, 14-21) ELECTRODE ASSEMBLY (INC 5, 20-26) CONE BOLT ELECTRODE PLATE SIGHT GLASS SNAP RING WASHER ELECTRODE ELECTRODE BRACKET A FUEL NOZZLE HOLDER FUEL NOZZLE (2003) FUEL NOZZLE (1502) TOP PAN ACORN NUT LOCKWASHER

26 GUN / WAND / HOSE ASSEMBLY HSE_HSP SMALL - GUN_WAND_HOSE ASSY CH 26

27 HSE_HSP SMALL - GUN WAND HOUSE ASSY CH GUN / WAND / HOSE ASSEMBLY ITEM DESCRIPTION PART # QTY 1 TRIGGER GUN 5000 PSI QUICK CONNECT QUICK CONNECT HOSE QUICK CONNECT DUAL LANCE QUICK CONNECT NOZZLE QC NOZZLE QC NOZZLE QC NOZZLE QC NOZZLE QC NOZZLE QC NOZZLE QC NOZZLE QC

28 DUAL LANCE ASSEMBLY ( ) _ RZ 28

29 RZ DUAL LANCE ASSEMBLY ( ) REF. # DESCRIPTION PART # QTY. 1 Dual Lance Assembly - 36" (Inc. 2-11) Detergent Nozzle Nut Clamp Lower Valve Cover (See ) N/A Sep. 1 6 Housing (See ) N/A Sep. 1 7 Lance Handle Repair Kit Lance (See ) N/A Sep Screw Nozzle Adapter

30 FUEL TANK HSE_HSP SMALL FUEL TANK ASSY CH FUEL TANK ASSEMBLY ITEM DESCRIPTION PART # QTY 1 FUEL CAP FUEL GAUGE GROMMET FUEL GAUGE ELBOW FUEL PICK UP NIPPLE DECAL - CAUTION: RISK OF FIRE (SEE ) N/A 1 8 FUEL TANK DRAIN PLUG HSE_HSP SMALL FUEL TANK ASSY CH 30

31 FUEL PUMP (3-0020) HSP BAR FUEL PUMP (3-0020) REF. # DESCRIPTION PART # QTY. 1 Fuel Pump Complete-Right Hand Cover Screw Cover-Right Hand OMHSP BAR FUEL SOLENOID ( ) 4 Strainer Cover Gasket Plug Body N/A 1 8 Plug MHSP BAR FUEL SOLENOID ( ) REF. # DESCRIPTION PART # QTY. 1 Solenoid Complete-120V Solenoid Body Solenoid Piston OMHSP BAR 4 Solenoid Base Screw (See ) N/A Sep. 2 6 Solenoid Coil-120V Spring (See ) N/A Sep. 1 8 Piston Nut Din Connector Cord

32 ELECTRIC BOX ASSEMBLY FOR AC-1500EH HSE-1002_ E-BOX ASSY ALCA 32

33 HSE-1002_1502-E-BOX ASSY A ALC ELECTRIC BOX ASSEMBLY ITEM DESCRIPTION PART # QTY 1 GASKET ELECTRIC BOX BACK A ELECTRICAL LOCKNUT STRAIN RELIEF CORD RELIEF BOLT SCREW ELECTRICAL LOCKNUT CAM SWITCH (1502) CAM SWITCH (1002) CAM SWITCH (HX-0232, HX-0239, HX-0245, HX-0246) BOLT ELECTRIC BOX COVER A TERMINAL STRIP NUT STAR WASHER IGNITER BRACKET A SPARK PLUG WIRE ASSY ELECTRODE BOOT SPARK PLUG TERMINAL ELECTRODE WIRE TERMINAL IGNITOR BUTT SPLICE HEAT SHRINK *(ONE FOOT REQUIRED) CORD *(TWO FEET REQUIRED) *MUST ORDER IN ONE FOOT LENGTHS 33

34 ELECTRIC BOX ASSEMBLY FOR AC-2000EH HSE E-BOX ASSY CH 34

35 HSE-2003 ELECTRIC BOX ASSEMBLY CH ELECTRIC BOX ASSEMBLY ITEM DESCRIPTION PART # QTY 1 GASKET ELECTRIC BOX BACK A FUSE HOLDER BOLT FUSE AMP ELECTRICAL LOCKNUT STRAIN RELIEF CORD RELIEF BOLT ELECTRICAL LOCKNUT CAM SWITCH BOLT ELECTRIC BOX COVER A NUT STAR WASHER TERMINAL STRIP SCREW TRANSFORMER IGNITER BRACKET A SCREW IGNITOR NUT SPARK PLUG BOOT ELECTRODE WIRE

36 WIRE SCHEMATIC FOR AC-1500EH WS - HSE-1002_ MLK 36

37 WIRE DIAGRAM FOR AC-1500EH WD - HSE-1002_ MLK 37

38 WIRE SCHEMATIC FOR AC-2000EH WS - HSE CH 38

39 WIRE DIAGRAM FOR AC-2000EH WD - HSE CH 39

40 40

41 ACCESSORIES OPTIONS HX-0232 HX-0233 HX-0235 HX-0231 HX-0240 HX-0242 DESCRIPTION 300F STEAM (AC-1500EH) ADJUSTABLE THERMOSTAT HOUR METER AUTO START/STOP (AC-1500EH) 300F STEAM (AC-2000EH) AUTO START/STOP (AC-2000EH) 41

42 OPTION- STEAM PLUMBING (HX-0232 / HX-0240) HSE SMALL - ADJ THERM_STEAM PLUMBING_GEN CH 42

43 HSE SMALL- ADJ THERM_STEAM PLUMBING_GEN CH OPTION-ADJUSTABLE THERMOSTAT WITH STEAM PLUMBING ITEM DESCRIPTION PART # QTY 1 HEAT DUMP VALVE TEE UNLOADER PLUG ELBOW HOSE *(FOUR FEET REQUIRED) HOSE BARB TEE CLAMP WORM FUEL HOSE *(ONE FOOT REQUIRED) PRESSURE SWITCH REDUCER ELBOW TEE HIGH PRESSURE HOSE STREET TEE REDUCER ADJUSTABLE THERMOSTAT HI LIMIT SWITCH *MUST ORDER IN ONE FOOT LENGTHS 43

44 OPTION- ADJUSTABLE THERMOSTAT (HX-0233 AND HX-0235) HX-0233_HX-0235 ADJUSTABLE THERMOSTAT AND HOUR METER CH 44

45 HX-0233 AND HX-0235 ADJ THERM_HR METER CH OPTION-ADJUSTABLE THERMOSTAT AND HOUR METER ITEM DESCRIPTION PART # QTY 1 ADJUSTABLE THERMOSTAT REDUCER LOCKNUT ELECTRIC BOX COVER A HOUR METER SCREW ELECTRIC BOX COVER A

46 OPTION- CONTROL PANEL (HX-0231, HX-0242) HSE SMALL - OPTION CONTROL PANEL CH 46

47 HSE SMALL - OPTION CONTROL PANEL JD CH OPTION - CONTROL PANEL ITEM DESCRIPTION PART # QTY 1 E-BOX COVER PLATE A BOLT PANEL MOUNT BRACKET A BOLT BOLT PANEL/CONTROL A STAR WASHER SCREW CAM SWITCH ELECTRICAL BOX PLASTIC ZIPLOCK BAG STRAIN RELIEF ELECTRIC PANEL ASSEMBLY N/A 1 14 ELECTRICAL LOCKNUT NUT PANEL MOUNT BRACKET W/HANGER A

48 OPTION- ELECTRIC PANEL HSE SMA;; ELECTRIC PANEL AUTO SS_TIME DELAY CH 48

49 HSE SMALL - ELECTRIC PANEL AUTO SS_TIME DELAY JOHN DEERE CH ELECTRIC PANEL ASSEMBLY ITEM DESCRIPTION PART # QTY 1 TERMINAL STRIP SCREW BOLT DECAL - TERMINAL STRIP N/A 1 5 ELECTRIC PANEL A DIN RAIL STAR WASHER TIMER CONTACTOR FUSE 0.5A (AC-2000EH) FUSE 0.6A (AC-2000EH) TRANSFORMER (AC-2000EH) NUT

50 OPTION- AUTO START / STOP PLUMBING HSE SMALL-AUTO SS PLUMBING_GEN CH 50

51 HSE SMALL-AUTO SS PLUMBING GEN CH AUTO START/STOP PLUMBING ITEM DESCRIPTION PART # QTY 1 PRESSURE SWITCH REDUCER TEE HIGH PRESSURE HOSE

52 WIRE SCHEMATIC AUTO START STOP (AC-1500EH) WIRING SCHEMATIC _1502 AUTO SS JPS 52

53 WIRE DIAGRAM AUTO START STOP (AC-1500EH) WIRING DIAGRAM _1502 AUTO SS JPS 53

54 WIRE SCHEMATIC AUTO START STOP (AC-2000EH) WIRING SCHEMATIC AUTO SS JPS 54

55 WIRE DIAGRAM AUTO START STOP (AC-2000EH) WIRING DIAGRAM AUTO SS JPS 55

56 WIRE SCHEMATIC AUTO START / STOP AND STEAM (AC-1500EH) WIRING SCHEMATIC _1502 AUTO SS_STEAM JPS 56

57 WIRE DIAGRAM AUTO START / STOP AND STEAM (AC-1500EH) WIRING DIAGRAM _1502 AUTO SS_STEAM JPS 57

58 WIRE SCHEMATIC AUTO START / STOP AND STEAM (AC-2000EH) WIRING SCHEMATIC AUTO SS_STEAM ALC 58

59 WIRE DIAGRAM AUTO START / STOP AND STEAM (AC-2000EH) WIRING DIAGRAM AUTO SS_STEAM ALC 59

60 EX Manufactured for Deere & Company Moline, Illinois Parts List

HSE MM11: HSE MM11: HSE MM11:

HSE MM11: HSE MM11: HSE MM11: PARTS LIST FOR HSE-1002-0MM11 HSE-1502-0MM11 HSE-2003-0MM11 AFTER SERIAL #15105510 PUMP OIL GRADE: PUMP OIL CAPACITY: FUEL NOZZLE: HSE-1002-0MM11: HSE-1502-0MM11: HSE-2003-0MM11: Mi-T-M #AW-4085-0016 16.9