PARTS LIST FOR SH-100LP, SH-155LP AND SH-375LP

Transcription

1 PARTS LIST FOR SH-100LP, SH-155LP AND SH-375LP Space Heaters

2 This Parts Listing has been compiled for your benefit. You can be assured your space heater was constructed and designed with quality and performance in mind. Each component has been rigorously tested to insure the highest level of acceptance. The contents of this Parts Listing are based on the latest product information available at the time of publication. The manufacturer reserves the right to make changes in price, color, materials, equipment, specifications or models at any time without notice. WARNING THIS IS A PROFESSIONAL SPACE HEATER. CAUTION SHOULD BE OBSERVED WHEN USING OR REPAIRING THIS UNIT! READ AND FOLLOW THE SAFETY WARNINGS LISTED BELOW BEFORE ATTEMPTING ANY REPAIRS ON THIS SPACE HEATER! SAFETY WARNINGS 1. NEVER alter or modify the equipment. Use only genuine manufacturer parts for repair of your space heater. Failure to do so can cause hazardous operating conditions and will VOID warranty. 2. Know how to stop and bleed pressures quickly. Be thoroughly familiar with controls. 3. Before servicing the unit, turn unit off, and allow the unit to cool down. Do not make repairs while the unit is running. Service in a clean, dry, flat area. Block the wheels to prevent the unit from moving. Be especially careful to properly dispose of any flammable materials. Table of Contents SPECIFICATIONS...3 FRAME ASSEMBLY FOR SH-100LP...4 FRAME ASSEMBLY FOR SH-155LP...6 FRAME ASSEMBLY FOR SH-375LP...8 NOTES

3 SPECIFICATIONS MODeL NUMBeR SH-100LP SH-155LP SH-375LP Output Rating (BTU/Hr): 65,000 / 85,000 / 00,000 50, ,000-5,000 Heating Area: 8ft. / 2.m ceiling* 2,00 sq. ft. (731.52m 2 ) 3,500 sq. ft. ( m 2 ) 8,800 sq. ft. (2682.2m 2 ) Heating Work Area: 8ft. / 2.m ceiling 0ft. x 50ft. (12.19m x 15.2m) 50ft. x 70ft. (15.2m x 21.3m) 88ft. x 100ft. (26.82m x 30.8m) 10ft. / 3.05m ceiling 7ft. x 0ft. (1.33m x 12.19m) 50ft. x 56ft. (15.2m x 17.07m) 88ft. x 80ft. (26.82m x 2.38m) Fuel System: Propane / LP Tank Capacity lb. ( kg) 100 lb. (5. kg) (2) 100 lb. (5. kg) electrical System: Motor (HP) /8 /8 /8 Cycle 60 Hz 60 Hz 60 Hz Voltage 20 AC 20 AC 20 AC Ignition System Continuous Spark DSI-Electronic Electronic Hot Air Output (approximate per minute): 75 cu. ft. (13.5m ) 550 cu. ft. (15.57m ) 1,500 cu. ft. (2.8m ) Safety System: Unit Dimensions (L x W x H): x 9.0 x 15.5 in x x cm Automatic Fuel Shut-off 32 x 13.5 x 16.5 in x 3.3 x 1.9cm 35 x 13 x 19.5 in. 81 x 3 x 1 cm Unit Weight without Fuel (Lbs/kg): 23 / / / 18.6 Unit Shipping Weight (Lbs/kg): 29 / / / 21.8 *Based on 0 F (22.2 C) heat rise.

4 FRAME ASSEMBLY FOR SH-100LP AC-100LP FRAME ASSY

5 A_I 100LP FRAME ASSY FRAMe ASSeMBLY FOR SH-100LP ReF # DeScRIPTION PART # QTY ReF # DeScRIPTION PART # QTY Base Tray Ignitor Electrode Hex Screw Ignitor Cable Base Hex Screw Nozzle Power Cord Shell Kit Strain Relief Bushing Hex Screw Valve Kit Handle Ignition Control Combustion Chamber Kit N/A 26 Relay Wire Assembly Thermocouple Relay Wire Assembly Thermocouple Clip Relay Wire Assembly Fuel Tube Kit Relay Kit Fan U-Clip Nut Motor 68-0 Ignition Control Wire Assembly Motor Bracket Ignition Control Wire Assembly Hex Locknut Ignition Control Wire Assembly Fan Guard Terminal Board Control Knob Rivet Thermal Switch Kit

6 FRAME ASSEMBLY FOR SH-155LP AC-155LP FRAME ASSY

7 A_I 155LP FRAME ASSY FRAMe ASSeMBLY FOR SH-155LP ReF # DeScRIPTION PART # QTY ReF # DeScRIPTION PART # QTY Upper Shell Hex Nut Screw Lower Shell Combustion Chamber Kit N/A 2 Side Cover Nozzle ON/OFF Switch Ignitor Built-in Thermostat Screw Thermostat Knob Fuel Tube Kit Handle Ignitor Cable Screw Plug Fan Guard Fan Motor and Relay Support Bracket Assembly Motor Strain Relief Bushing Bushing Power Cord Sleeve Cap Bumper Male Connector Locknut Solenoid Valve Rivet Side Cover Terminal Board Base Screw Screw Hex Screw Hex Nut Clip Nut Screw High Temperature Wire Assembly Bushing High Temperature Wire Assembly Bushing DSI Control Thermal Limit Switch DSI Wire Harness Screw

8 FRAME ASSEMBLY FOR SH-375LP AC-375LP FRAME ASSY

9 A_I 375LP FRAME ASSY FRAMe ASSeMBLY FOR SH-375LP ReF # DeScRIPTION PART # QTY ReF # DeScRIPTION PART # QTY Outer Shell Nozzle Combustion Chamber Kit N/A 9 Side Cover Burner Assembly N/A 20 Side Cover Ignitor Thermal Switch Kit Cleat Motor Mount Handle ON/OFF Switch Ignitor Cable Indicator Plate N/A 8 Fan Terminal Board Motor Base Bushing Rear Plate Assembly Fan Guard Elbow Fitting Strain Relief Bushing Compression Fitting Cord Assembly Hex Screw Male Fitting Thermostat Solenoid Bracket Thermostat Knob Solenoid Valve DSI Wire Harness 68-0 Fuel Tube DSI Control

10 NOTES 10

11 NOTES 11

12 12