CM MHC CM MHC CM MKC CM MMC

Transcription

1 Chore Master PARTS LIST FOR CM MHC CM MHC CM MKC CM MMC Engine Oil Capacity: See Model Specifications Pump Oil Grade: Mi-T-M Pump Oil AW Pump Oil Capacity: 3.6 oz. / 0.11 L Nozzle Size: 3.0 1

2 This Parts Listing has been compiled for your benefit. You can be assured your cold water pressure washer was constructed and designed with quality and performance in mind. Each component has been rigorously tested to insure the highest level of quality. The contents of this Parts Listing are based on the latest product information available at the time of publication. Mi-T-M reserves the right to make changes in price, color, materials, equipment, specifications or models at any time without notice. WARNING THIS IS A PROFESSIONAL HIGH PRESSURE, COLD WATER PRESSURE WASHER. CAUTION SHOULD BE OBSERVED WHEN USING OR REPAIRING THIS UNIT! READ AND FOLLOW THE SAFETY WARNINGS LISTED BELOW BEFORE ATTEMPTING ANY REPAIRS ON THIS PRESSURE WASHER! SAFETY WARNINGS 1. NEVER alter or modify the equipment. Be sure any accessory items and system components being used will withstand the pressure developed. Use only genuine manufacturer parts for repair of your pressure washer. Failure to do so can cause hazardous operating conditions and will VOID warranty. 2. NEVER make adjustments on machinery while the unit is connected to the engine without first removing the ignition cable from the spark plug. Turning over the machinery by hand during adjustment or cleaning might start the engine and machinery with it, causing serious injury to the operator. 3. Know how to stop and bleed pressures quickly. Be thoroughly familiar with controls. 4. Before servicing the unit, turn unit off, relieve the water pressure and allow the unit to cool down. Do not make repairs while the unit is running. Service in a clean, dry, flat area. Block the wheels to prevent the unit from moving. Be especially careful to properly dispose of any flammable materials. 5. After testing the machine, DO NOT leave the pressurized unit unattended. Shut off the unit and release trapped pressure before leaving. Table of Contents SPECIFICATIONS...3 FRAME ASSEMBLY...4 MOTOR / PUMP ASSEMBLY (3-0411)...6 2

3 SPECIFICATIONS MODEL NUMBER CM MHC CM MHC CM MKC CM MMC Operating Pressure (PSI/Bar): 2500/ / / /206.8 High Pressure Nozzle: Water Volume (GPM/lpm): 2.3/ / / /8.7 Engine: Honda Honda Kohler Mi-T-M Model # GC160 GC190 SH Engine Type 4 Stroke, Overhead Cam, Single Cylinder 4 Stroke, Overhead Cam, Single Cylinder 4 Stroke, Overhead Valve, Single Cylinder 4 Stroke, Overhead Valve, Single Cylinder Oil Type SAE10W-30 SAE10W-30 SAE10W-30 SAE10W-30 Oil Capacity (oz./liters) 19.5/ / / /0.60 Fuel Type Unleaded Gasoline 86 Octane Minimum Unleaded Gasoline 86 Octane Minimum Unleaded Gasoline 86 Octane Minimum Unleaded Gasoline 86 Octane Minimum Fuel Capacity (gallon/ liters) 0.48/ / / /3.6 Starting Recoil Recoil Recoil Recoil Maximum No Load RPM 3800 (+/- 100) RPM 3800 (+/- 100) RPM 3800 (+/- 100) RPM 3800 (+/- 100) RPM Pump: Direct Driven, Oil Bath, Axial Piston Direct Driven, Oil Bath, Axial Piston Direct Driven, Oil Bath, Axial Piston Direct Driven, Oil Bath, Axial Piston Oil Type SAE 20W-40 SAE 20W-40 SAE 20W-40 SAE 20W-40 Oil Capacity (oz./liters) 3.6/ / / /0.11 Plungers Ceramic Coated Ceramic Coated Ceramic Coated Ceramic Coated Manifold Forged Brass Forged Brass Forged Brass Forged Brass Valves Stainless Steel Stainless Steel Stainless Steel Stainless Steel Unloader Preset Preset Preset Preset Heat Dump Valve Relieves heated water during unloader bypass stage Relieves heated water during unloader bypass stage Relieves heated water during unloader bypass stage Relieves heated water during unloader bypass stage Detergent Injector Low pressure down stream from pump Low pressure down stream from pump Low pressure down stream from pump Low pressure down stream from pump Detergent Tank Yes Yes Yes Yes Unit Net Weight (lbs/kg) 64/29 68/31 74/ /33.5 Unit Shipping Weight (lbs/kg) 74/ /35 84/38 84/38 Unit Net Dimension (in/cm) 26.7Lx18.6Wx39.3H/ 68Lx47Wx100H 26.7Lx18.6Wx39.3H/ 68Lx47Wx100H 26.7Lx18.6Wx39.3H/ 68Lx47Wx100H 26.7Lx18.6Wx39.3H/ 68Lx47Wx100H Unit Shipping Dimension (in/cm) 25.5Lx18.5Wx26.75H/ 65Lx47Wx68H 25.5Lx18.5Wx26.75H/ 65Lx47Wx68H 25.5Lx18.5Wx26.75H/ 65Lx47Wx68H 25.5Lx18.5Wx26.75H/ 65Lx47Wx68H 3

4 FRAME ASSEMBLY CM MHC_3000-4MHC_4MKC_4MMC CH 4

5 CM MHC_3000-4MHC_4MKC_4MMC CH FRAME ASSEMBLY ITEM DESCRIPTION PART # QTY 1 HIGH PRESSURE HOSE GUN & WAND PSI DECAL - RISK OF INJECTION (SEE ) N/A 1 4 LANCE ASSEMBLY DECAL- SILVER STICKER N/A 1 6 WHEEL LOCKNUT WASHER LOCKNUT ISOLATOR BOLT HOSE *(THREE FEET REQUIRED) DECAL-DETERGENT INS DECAL-DETERGENT INFO CHEMICAL TANK W/CAP DECAL - CHOREMASTER FRAME A LOCKNUT WASHER BOLT ISOLATOR ISOLATION PLATE A DECAL - REWIND 212CC (3000-4MMC) ENGINE (3000-4MKC) ENGINE (2500-4MHC) ENGINE (3000-4MMC) ENGINE (3000-4MHC) DECAL - RISK OF BURNS (SEE ) N/A 1 26 DECAL - RISK OF FIRE (SEE ) N/A 1 27 KEY PUMP LOCKWASHER BOLT HANDLE A DECAL - PLACARD 2500PSI DECAL - PLACARD 3000PSI DECAL - WARNING/CAUTION/OPERATION (SEE ) N/A 1 34 GROMMET NOZZLE 15 DETERGENT NOZZLE 25 DETERGENT NOZZLE 65 DETERGENT KNOB LOCKNUT PLUG CARRIAGE BOLT DECAL SET *MUST ORDER IN ONE FOOT LENGTHS 5

6 PUMP ASSEMBLY (3-0411) KMD 6

7 KMD PUMP ASSEMBLY ITEM DESCRIPTION PART # QTY 1 SCREW FLANGE O-RING OIL SEAL REAR BEARING N/A 1 6 WOBBLE PLATE ASSEMBLY N/A 1 7 FRONT BEARING N/A 1 8 PLUG O-RING PUMP HOUSING N/A 1 11 KIT - INLET PLUG ASSEMBLY (SEE KIT ) SEE KIT 3 12 VALVE ASSEMBLY (SEE KIT ) SEE KIT 6 13 KIT - COMPLETE UNLOADER PLUG BOLT FILTER KIT- INLET ASSEMBLY THERMAL RELIEF VALVE INLET BODY SEAL PUMP HEAD N/A 1 21 KIT - NON-RETURN VALVE NON-RETURN VALVE SPRING KIT - OUTLET/BARB ASSEMBLY WATER SEAL (SEE KIT ) SEE KIT 3 25 WATER SEAL WASHER (SEE KIT ) SEE KIT 3 26 O-RING (SEE KIT ) SEE KIT 3 27 LOCATING RING O-RING (SEE KIT ) SEE KIT 3 29 OIL SEAL PLUNGER SPRING N/A 3 31 PISTON SPRING DISK N/A 3 REPLACEMENT KITS KIT # DESCRIPTION ITEMS # OF ASSEMBLIES # OF CYLINDERS KIT - INLET PLUG KIT - PACKINGS 24, 25, 26, 28 3, 3, 3, KIT - VALVES W/ O-RING

8 Manufactured by Mi-T-M 50 MI-T-M Drive, Peosta IA / Fax