DIMENSIONS. Oil Capacity = 14.6 oz Maximum Fluid Temperature = 140 F Inlet Thread = 1/2 F Discharge Thread = 3/8 F
|
|
- Sharleen Kimberly Henry
- 5 years ago
- Views:
Transcription
1 Plunger Pumps XMA 1750 RPM E VERSION 1 1/8 WITH NEMA FLANGE FEATURING MANIFOLD: High strength forged brass for long term use. DIMENSIONS BOLTS: Eight 6mm grade PLUNGERS: A special thick solid ceramic for long life, strong durability and more resilience. CRANKCASE: Precision die-cast, large cooling fins and anodized for maximum heat dissipation. Sight glass, fill and side and bottom drain plugs. BEARINGS: Oversized for maximum life and load disbursement, needle bearing on the drive side and ball on the non-drive side. Each bearing is held in position on the crankshaft and crankcase by snap rings. This assures positive alignment and centering of the connecting rods and crankshaft in relation to the crankcase, it also eliminates the crankshaft from floating. VALVES, SEATS, AND SPRINGS: Stainless steel with specially designed Ultra Form cages to provide extra long life and positive seating. SEALS AND V-PACKINGS: Continuously lubricating for extended life. PLUNGER RODS: High strength stainless steel. CONNECTING RODS: One piece special alloy aluminum based, oversized for maximum strength, load disbursement, and long life. Heavy pin area construction, for added load strength. SPECIFICATIONS MAX MAX MAX MAX POWER BORE STROKE CRANKSHAFT WEIGHT MODEL GPM LMP PSI BAR EBHP DIA MM MM ID STAMP LBS. XMA3G25E-F XMA3G30E-F XMA3.5G25E-F Oil Capacity = 14.6 oz Maximum Fluid Temperature = 140 F Inlet Thread = 1/2 F Discharge Thread = 3/8 F Torque Specifications Inch pounds (ft. lbs) HEAD PISTON NUT REAR COVER SIDE COVER VALVE CAP CON RODS 133 (11) 106 (8.8) 89 (7.5) N/A 442 (37) N/A SPECIAL NOTE: Use AR64516 Oil. First change oil after 50 hours of use. Then every 500 hours. This oil is specially formulated to provide correct lubrication properties for our pumps. No other oil is factory approved for these pumps. High Performance Pumps
2 XMA 1750 RPM E VERSION 1 1/8 WITH NEMA FLANGE PARTS BREAKDOWN Pos. Code Description Qty. Pos. Code Description Qty. Legend O-Ring Plug Complete valve O-Ring Plug Support ring Ø Support ring Ø Gasket Ø Gasket Ø Piston guide Ø Piston guide Ø Pump body Cap Circlip Snap ring Bearing Oil cap Piston pin O-Ring Screw Complete cover Con rod Guiding piston O-Ring Spacer disc Piston Ø Piston Ø Piston washer Nut Base 2 26b /8 Rail Kit 1 26c 2633H 2-5/8 Rail Kit O-Ring Plug 3/8 G Screw Seal Rear piston guide Ø Rear piston guide Ø O-Ring Gasket Ø Gasket Ø Plug 1/2 G Brass O-Ring Head Washer Screw Bearing Snap ring Seal Hollow shaft Hollow shaft Hollow shaft Pump head assembly Pump head assembly Motor flange Screw Oil indicator Snap ring Disc O-Ring 1 Ø 15 Ø 15 Ø 18 For For For XMA3G25 XMA3.5G22 XMA4G20 XMA3G30 XMA3.5G25 Repair Kits Water Seal Pistons Valve Oil Seals Kit 2741 Ø15 Kit 2544 Ø15 Kit 2747 Ø18 Kit 2545 Ø18 Kit 1864 Kit 2787 Pos. Qty. Pos. Qty. Pos. Qty. Pos. Qty Support Rings Kit 2740 Ø15 Kit 2745 Ø18 Pos. Qty. 6 3 Special Parts Code Description Qty Viton water seals Ø Viton water seals Ø18 1
3 Plunger Pumps XMA 1750 RPM E VERSION 5/8 WITH NEMA 56-C FLANGE FEATURING DIMENSIONS MANIFOLD: High strength forged brass for long term use. BOLTS: Eight 6mm grade PLUNGERS: A special thick solid ceramic for long life, strong durability and more resilience. CRANKCASE: Precision die-cast, large cooling fins and anodized for maximum heat dissipation. Sight glass, fill and side and bottom drain plugs. BEARINGS: Oversized for maximum life and load disbursement, needle bearing on the drive side and ball on the non-drive side. Each bearing is held in position on the crankshaft and crankcase by snap rings. This assures positive alignment and centering of the connecting rods and crankshaft in relation to the crankcase, it also eliminates the crankshaft from floating. VALVES, SEATS, AND SPRINGS: Stainless steel with specially designed Ultra Form cages to provide extra long life and positive seating. SEALS AND V-PACKINGS: Continuously lubricating for extended life. PLUNGER RODS: High strength stainless steel. CONNECTING RODS: One piece special alloy aluminum based, oversized for maximum strength, load disbursement, and long life. Heavy pin area construction, for added load strength. SPECIFICATIONS MAX MAX MAX MAX POWER BORE STROKE CRANKSHAFT WEIGHT MODEL GPM LMP PSI BAR EBHP DIA MM MM ID STAMP LBS. XMA2G15E-F XMA2G22E-F XMA2.5G18E-F XMA3G18E-F Oil Capacity = 14.6 oz Maximum Fluid Temperature = 140 F Inlet Thread = 1/2 F Discharge Thread = 3/8 F Torque Specifications Inch pounds (ft. lbs) HEAD PISTON NUT REAR COVER SIDE COVER VALVE CAP CON RODS 133 (11) 106 (8.8) 89 (7.5) N/A 442 (37) N/A SPECIAL NOTE: Use AR64516 Oil. First change oil after 50 hours of use. Then every 500 hours. This oil is specially formulated to provide correct lubrication properties for our pumps. No other oil is factory approved for these pumps. High Performance Pumps
4 XMA 1750 RPM E VERSION 5/8 WITH NEMA 56-C FLANGE PARTS BREAKDOWN Pos. Code Description Qty. Pos. Code Description Qty. Legend O-Ring Plug Complete valve O-Ring Plug Support ring Gasket Piston guide Pump body Cap Circlip Snap ring Bearing Oil cap Piston pin O-Ring Screw Complete cover Con rod Guiding piston O-Ring Spacer disc Piston Piston washer Nut Base O-Ring Plug 3/8 G Screw Seal Rear piston guide O-Ring Gasket Plug 1/2 G Brass O-Ring Head Washer Screw Bearing Snap ring Seal Hollow shaft Pump head assembly Motor flange Screw Oil indicator Snap ring Disc O-Ring 1 Ø 15 Ø 15 Ø 15 XMA2G10 XMA2.5G18 XMA3G18 XMA2G15 XMA2G22 Repair Kits Water Seal Pistons Valve Oil Seals Kit 2741 Kit 2544 Kit 1864 Kit 2787 Pos. Qty. Pos. Qty. Pos. Qty. Pos. Qty Support Rings Kit 2740 Pos. Qty. 6 3 Special Parts Code Description Qty Viton water seals Ø15 1
5 Plunger Pumps FEATURING MANIFOLD: High strength forged brass for long term use. XMA 1750 RPM N VERSION 3/4 SOLID SHAFT DIMENSIONS BOLTS: Eight 6mm grade PLUNGERS: A special thick solid ceramic for long life, strong durability and more resilience. CRANKCASE: Precision die-cast, large cooling fins and anodized for maximum heat dissipation. Sight glass, fill and side and bottom drain plugs. BEARINGS: Oversized for maximum life and load disbursement, needle bearing on the drive side and ball on the non-drive side. Each bearing is held in position on the crankshaft and crankcase by snap rings. This assures positive alignment and centering of the connecting rods and crankshaft in relation to the crankcase, it also eliminates the crankshaft from floating. VALVES, SEATS, AND SPRINGS: Stainless steel with specially designed Ultra Form cages to provide extra long life and positive seating. SEALS AND V-PACKINGS: Continuously lubricating for extended life. PLUNGER RODS: High strength stainless steel. CONNECTING RODS: One piece special alloy aluminum based, oversized for maximum strength, load disbursement, and long life. Heavy pin area construction, for added load strength. SPECIFICATIONS MAX MAX MAX MAX POWER BORE STROKE CRANKSHAFT WEIGHT MODEL GPM LMP PSI BAR EBHP DIA MM MM ID STAMP LBS. XMA3.5G22N Oil Capacity = 14.6 oz Maximum Fluid Temperature = 140 F Inlet Thread = 1/2 F Discharge Thread = 3/8 F Torque Specifications Inch pounds (ft. lbs) HEAD PISTON NUT REAR COVER SIDE COVER VALVE CAP CON RODS 133 (11) 106 (8.8) 89 (7.5) N/A 442 (37) N/A SPECIAL NOTE: Use AR64516 Oil. First change oil after 50 hours of use. Then every 500 hours. This oil is specially formulated to provide correct lubrication properties for our pumps. No other oil is factory approved for these pumps. High Performance Pumps
6 XMA 1750 RPM N VERSION 3/4 SOLID SHAFT PARTS BREAKDOWN Pos. Code Description Qty. Pos. Code Description Qty. Legend O-Ring Plug Complete valve O-Ring Plug Support ring Gasket Piston guide Pump body Cap Circlip Snap ring Bearing Oil cap Piston pin O-Ring Screw Complete cover Con rod Guiding piston O-Ring Spacer disc Piston Piston washer Nut Base 2 26b /8 Rail Kit 1 26c 2633H 2-5/8 Rail Kit O-Ring Plug 3/8 G Screw Seal Rear piston guide O-Ring Gasket Plug 1/2 G Brass O-Ring Head Washer Screw Bearing Snap ring Crankshaft Key Seal Pump head assembly Oil indicator Snap ring Disc O-Ring 1 Ø 15 XMA3.5G22 Repair Kits Water Seal Pistons Valve Oil Seals Kit 2741 Kit 2544 Kit 1864 Kit 2786 Pos. Qty. Pos. Qty. Pos. Qty. Pos. Qty Support Rings Kit 2740 Pos. Qty. 6 3 Special Parts Code Description Qty Viton water seals Ø15 1
7 Plunger Pumps FEATURING MANIFOLD: High strength forged brass for long term use. XMA 1750 RPM N VERSION 24MM SOLID SHAFT DIMENSIONS BOLTS: Eight 6mm grade PLUNGERS: A special thick solid ceramic for long life, strong durability and more resilience. CRANKCASE: Precision die-cast, large cooling fins and anodized for maximum heat dissipation. Sight glass, fill and side and bottom drain plugs. BEARINGS: Oversized for maximum life and load disbursement, needle bearing on the drive side and ball on the non-drive side. Each bearing is held in position on the crankshaft and crankcase by snap rings. This assures positive alignment and centering of the connecting rods and crankshaft in relation to the crankcase, it also eliminates the crankshaft from floating. VALVES, SEATS, AND SPRINGS: Stainless steel with specially designed Ultra Form cages to provide extra long life and positive seating. SEALS AND V-PACKINGS: Continuously lubricating for extended life. PLUNGER RODS: High strength stainless steel. CONNECTING RODS: One piece special alloy aluminum based, oversized for maximum strength, load disbursement, and long life. Heavy pin area construction, for added load strength. SPECIFICATIONS MAX MAX MAX MAX POWER BORE STROKE CRANKSHAFT WEIGHT MODEL GPM LMP PSI BAR EBHP DIA MM MM ID STAMP LBS. XMA3G25N XMA3.5G22N XMA3.5G25N XMA4G20N Oil Capacity = 14.6 oz Maximum Fluid Temperature = 140 F Inlet Thread = 1/2 F Discharge Thread = 3/8 F Torque Specifications Inch pounds (ft. lbs) HEAD PISTON NUT REAR COVER SIDE COVER VALVE CAP CON RODS 133 (11) 106 (8.8) 89 (7.5) N/A 442 (37) N/A SPECIAL NOTE: Use AR64516 Oil. First change oil after 50 hours of use. Then every 500 hours. This oil is specially formulated to provide correct lubrication properties for our pumps. No other oil is factory approved for these pumps. High Performance Pumps
8 XMA 1750 RPM N VERSION 24MM SOLID SHAFT PARTS BREAKDOWN Pos. Code Description Qty. Pos. Code Description Qty. Legend O-Ring Plug Complete valve O-Ring Plug Support ring Ø Support ring Ø Gasket Ø Gasket Ø Piston guide Ø Piston guide Ø Pump body Cap Circlip Snap ring Bearing Oil cap Piston pin O-Ring Screw Complete cover Con rod Guiding piston O-Ring Spacer disc Piston Ø Piston Ø Piston washer Nut Base 2 26b /8 Rail Kit 1 26c 2633H 2-5/8 Rail Kit O-Ring Plug 3/8 G Screw Seal Rear piston guide Ø Rear piston guide Ø O-Ring Gasket Ø Gasket Ø Plug 1/2 G Brass O-Ring Head Washer Screw Bearing Snap ring Crankshaft Crankshaft Crankshaft Key Seal Pump head assembly Pump head assembly Oil indicator Snap ring Disc O-Ring 1 Ø 15 Ø 15 Ø 18 For For For XMA3G25 XMA3.5G22 XMA4G20 XMA3.5G25 Repair Kits Water Seal Pistons Valve Oil Seals Kit 2741 Ø15 Kit 2544 Ø15 Kit 2747 Ø18 Kit 2545 Ø18 Kit 1864 Kit 2786 Pos. Qty. Pos. Qty. Pos. Qty. Pos. Qty Support Rings Kit 2740 Ø15 Kit 2745 Ø18 Pos. Qty. 6 3 Special Parts Code Description Qty Viton water seals Ø Viton water seals Ø18 1
XMV 3400 RPM D VERSION 1 WITH GAS ENGINE FLANGE DIMENSIONS
Plunger Pumps FEATURING MANIFOLD: High strength forged brass for long term use. XMV 3400 RPM D VERSION 1 WITH GAS ENGINE FLANGE DIMENSIONS BOLTS: Eight 6mm grade 12.9. PLUNGERS: A special thick solid ceramic
More informationXTV 3400 RPM N VERSION 24MM SOLID SHAFT DIMENSIONS
Plunger Pumps FEATURING MANIFOLD: High strength forged brass for long term use. XTV 3400 RPM N VERSION 24MM SOLID SHAFT DIMENSIONS BOLTS: Six 6mm grade 12.9. PLUNGERS: A special thick solid ceramic for
More informationSJV 3400 RPM D VERSION 3/4 WITH GAS ENGINE FLANGE DIMENSIONS
Plunger Pumps FEATURING SJV 3400 RPM D VERSION 3/4 WITH GAS ENGINE FLANGE DIMENSIONS MANIFOLD: High strength forged brass for long term use. BOLTS: Three 8mm grade 8.8. PISTONS: Ceramic coated stainless
More informationAR North America. Bomporto Plant
Lit1-21 AR North America Modena Plant Shanghai Plant (PRC) Bomporto Plant AR High Pressure Pumps are the state-of-the-art choice since 1958. AR North America Annovi-Reverberi Pressure Pumps: Engineered
More informationPlunger Pumps. XT Series Pumps NORTH AMERICA. Description. Operating Instructions and Parts Manual
Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the product described. Protect yourself and others by observing all safety information.
More informationPlunger Pumps. XW Series Pumps NORTH AMERICA. Description. Operating Instructions and Parts Manual
Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the product described. Protect yourself and others by observing all safety information.
More informationPlunger Pumps. Plunger Pumps LIMITED WARRANTY
Torque Specifications in/lbs:(ft/lbs) Oil Manifold Piston Rear Side Valve Connecting Capacity (Head) Nut Cover Cover Cap Rods 92/(5) N/A 71/(6) N/A 442/(7) N/A LIMITED WARRANTY Annovi Reverberi (A.R.)
More informationHOT WATER PRESSURE WASHER BREAKDOWN
HOUR METER TACH / HOUR ON OFF THERMOSTAT BURNER OFF 29 9 20 28 25 4 23 24 3 2 34 33 0 5 8 9 7 6 6 ITEM PART NUMBER DESCRIPTION QTY. 85.600.220 Frame 2 N/A Engine, 3 HP, 389cc (GX390 2QNR) 2 85.578.50 Engine,
More informationPlunger Pumps. RSV Series Pumps NORTH AMERICA. Description. Operating Instructions and Parts Manual
Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the product described. Protect yourself and others by observing all safety information.
More informationTriplex Plunger Pump, Total Start-Stop Feature
GENERAL PUMP A member of the Interpump Group ET Series FEATURES Total start-stop feature allows flow to activate electric motor Built-in unloader Triplex Plunger Pump, TRIPLEX TRIPLEX Nickel-plated cast
More informationA member of the Interpump Group
FEATURES Nickel-plated cast manifold manufactured like heavy-duty pump line Triplex Plunger Pump, Gas New generation seal package New dust protection chamber TRIPLEX TRIPLEX Solid ceramic plungers New
More informationPlunger Pumps. RMV Series Pumps NORTH AMERICA. Description. Operating Instructions and Parts Manual
Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the product described. Protect yourself and others by observing all safety information.
More informationPlunger Pumps. SJ & XJ Series Pumps NORTH AMERICA. Description. Operating Instructions and Parts Manual
Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the product described. Protect yourself and others by observing all safety information.
More informationCometNews. Introducing a NEW high pressure plunger pumps. TW 500 bar FW 2. November 2011 Number 0 Year I Comet spa information
November 2011 Number 0 Year I Comet spa information CometNews November 2011 Number 0 Year I Comet Spa CometNews Introducing a NEW high pressure plunger pumps TW 500 bar FW 2 TW-TWS 500 bar 8 Plunger pumps
More informationPARTS LIST FOR WP MHB/RB. (Serial break# )
PARTS LIST FOR WP-3000-4MHB/RB (Serial break# 10380918) Engine Oil Grade: HONDA/ SUBARU: SAE10W-30 engine Oil Capacity: 20 oz. Pump Oil Grade: Mi-T-M Pump Oil AW-4085-0016 Pump Oil Capacity: 16 oz. nozzle
More informationPARTS LIST FOR WP-3200-HDHB
PARTS LIST FOR WP-3200-HDHB ENGINE OIL GRADE: HONDA/ SUBARU: SAE10W-30 ENGINE OIL CAPACITY: 20 oz. PUMP OIL GRADE: Mi-T-M Pump Oil AW-4085-0016 PUMP OIL CAPACITY: 16 oz. NOZZLE SIZE: 3.0 1 This Parts Listing
More informationPARTS LIST FOR CM-3000-ODLB CM-3000-ODLB-C (AFTER SERIAL # )
PARTS LIST FOR CM-3000-ODLB CM-3000-ODLB-C (AFTER SERIAL #10817968) Displacement: 212 cc Pump Oil Grade: Mi-T-M Pump Oil AW-4085-0016 Pump Oil Capacity: 16 oz. Nozzle Size: # 3.0 1 This Parts Listing has
More informationP SERIES PUMPS. 18mm Versions Nickle-Aluminum Bronze Models: P , P , P , P , P , P , P
P200-3100 SERIES PUMPS 18mm Versions Nickle-Aluminum Bronze Models: P217-3100, P218-3100, P219-3100, P220-3100, P221-3100, P227-3100, P230-3100 Triplex Ceramic Plunger Pump Operating Instructions/ Repair
More information8650 Enterprise Drive, Peosta IA / Fax
8650 Enterprise Drive, Peosta IA 52068 563-556-7484 / Fax 563-556-1235 PARTS LIST FOR WP-2700-0MIB/1MIB ENGINE OIL GRADE: ABOVE 40 F=SAE30 BELOW 40 F=SAE10W-30 ENGINE OIL CAPACITY: 20 OZ. PUMP OIL GRADE:
More informationCM-2800-OMVC & CM-2804/3304-OMHC PARTS LIST
8650 Enterprise Drive, Peosta IA 52068 319-556-7484 / Fax 319-556-1235 CM-2800-OMVC & CM-2804/3304-OMHC PARTS LIST Vanguard Engine Oil Grade: Vanguard Engine Oil Capacity: Honda Engine Oil Grade: Honda
More informationPARTS LIST FOR WP MHB WP MKB WP MSB (AFTER SERIAL # )
PARTS LIST FOR WP-3200-0MHB WP-3200-0MKB WP-3200-0MSB (AFTER SERIAL #10854374) ENGINE OIL GRADE: SAE10W-30 ENGINE OIL CAPACITY: 20 oz. PUMP OIL GRADE: Mi-T-M Pump Oil AW-4085-0016 PUMP OIL CAPACITY: 16.9
More information15 Frame Plunger Pump
15 Frame Plunger Pump 316 Stainless Steel Model 1951 Patented Design specifically for Liquid Carbon Dioxide FEATURES Superior Design Triplex Plunger design gives smoother flow. Plunger seals are lubricated
More informationQUINCY QRDS SERIES SINGLE-STAGE, OIL-LESS RECIPROCATING AIR COMPRESSORS 2-30 HP
QUINCY QRDS SERIES SINGLE-STAGE, OIL-LESS RECIPROCATING AIR COMPRESSORS 2-30 HP QUINCY QRDS SINGLE-STAGE, OIL-LESS Clean, oil-less air Quincy dependability High-efficiency, clean air CLEAN, OIL-LESS AIR
More informationPARTS LIST FOR CA E2G CA E2G-W. Pump Oil Capacity: Nozzle Size: 4.0
PARTS LIST FOR CA-2503-0E2G CA-2503-0E2G-W Motor Horsepower: 6.0 H.P. Pump Oil Grade: Pump Oil #AW-4085-0016 Pump Oil Capacity: 14 oz. Nozzle Size: 4.0 1 This Parts Listing has been compiled for your benefit.
More informationGENERAL PUMPA member of the Interpump Group
FEATURES Innovative drive design eliminates need for auxiliary hydraulic drive HWB Series Hydraulic Drive - Triplex Plunger Pump HWB2512 & HWB2112 Forged brass manifold No scheduled maintenance required
More informationPARTS LIST FOR CA MHB/RB (AFTER SERIAL # ) CA MVB
PARTS LIST FOR CA-2403-0MHB/RB (AFTER SERIAL #10173072) CA-2403-0MVB ENGINE OIL GRADE: HONDA/SUBARU: VANGUARD: ENGINE OIL CAPACITY: HONDA/SUBARU: VANGUARD: SAE10W-30 ABOVE 40 F = SAE30 BELOW 40 F = SAE10W-30
More informationPARTS LIST FOR CA MHB (AFTER SERIAL # ) Engine Oil Grade: SAE 10W-30 Engine Oil Capacity: 37 oz.
PARTS LIST FOR CA-3504-0MHB (AFTER SERIAL #10168073) Engine Oil Grade: SAE 10W-30 Engine Oil Capacity: 37 oz. Pump Oil Grade: Mi-T-M Pump Oil #AW-4085-0016 Pump Oil Capacity: 18.5 oz. Nozzle Size: 3.5
More informationTHE JOB PRO PARTS LIST FOR JP-1002/1502-0ME1. Motor Horsepower: Nozzle Size: Copyright 2003, Mi-T-M Corporation
THE JOB PRO PARTS LIST FOR JP-1002/1502-0ME1 Motor Horsepower: jp-1002-0me1: jp-1502-0me1: Pump Oil Grade: Pump Oil Capacity: Nozzle Size: jp-1002-0me1: jp-1502-0me1: 1.5 H.P. 2.0 H.P. Mi-T-M Pump Oil
More informationPARTS LIST FOR AIR COMPRESSORS AC-SH20-2 AC-SV20-2 ENGINE OIL GRADE: HONDA: SAE 10W-30. Below 40 F=SAE 10W-30 ENGINE OIL CAPACITY:
PARTS LIST FOR AIR COMPRESSORS AC-SH20-2 AC-SV20-2 ENGINE OIL GRADE: HONDA: SAE 10W-30 VANGUARD: Above 40 F=SAE30 Below 40 F=SAE 10W-30 ENGINE OIL CAPACITY: HONDA: 37 oz. VANGUARD: 40 oz. MAXIMUM PRESSURE
More informationPARTS LIST FOR AIR COMPRESSOR/GENERATOR AG2-SH13-30M, AG2-SH13-B AG2-SR14-30M, AG2-SS14-B AG2-SK14-30M, AG2-SK14-B AG2-SM14-30M, AG2-SM14-B
PARTS LIST FOR AIR COMPRESSOR/GENERATOR AG2-SH13-30M, AG2-SH13-B AG2-SR14-30M, AG2-SS14-B AG2-SK14-30M, AG2-SK14-B AG2-SM14-30M, AG2-SM14-B ENGINE OIL GRADE: SAE 10W-30 ENGINE OIL CAPACITY: HONDA 37.2
More informationCV MBC (AFTER SERIAL # )
The by Mi-T-M PARTS LIST FOR CV-1750-0MBC (AFTER SERIAL #10015094) Engine Oil Grade: Above 40 F=SAE 30 Below 40 F=SAE10W-30 Engine Oil Capacity: 20 oz. Pump Oil Grade: Mi-T-M Pump Oil #AW-4085-0016 Pump
More informationMODELS JG43, JG63, JG83 JG44, JG64, JG84
MODEL J STYLE G HERMETIC COMPRESSORS RENEWAL PARTS Supersedes: 180.23-RP4 (695) Form 180.23-RP4 (1298) MODELS JG43, JG63, JG83 JG44, JG64, JG84 (See Page 2 for Complete Model Nomenclature) 27531A UNIT
More informationSECTION D Engine 6.0L Diesel
303-01D-i Engine 6.0L Diesel 303-01D-i SECTION 303-01D Engine 6.0L Diesel CONTENTS PAGE DESCRIPTION AND OPERATION Engine... 303-01D-2 303-01D-2 Engine 6.0L Diesel 303-01D-2 DESCRIPTION AND OPERATION Engine
More informationHWB Series GENERAL PUMP. Hydraulic Drive Triplex Plunger Pump INDUSTRIAL INDUSTRIAL FEATURES
GENERAL PUMP HWB Series Hydraulic Drive Triplex Plunger Pump FEATURES INDUSTRIAL INDUSTRIAL Innovative drive design eliminates need for auxiliary hydraulic drive Forged brass manifold Built-in Pump Thermal
More informationPARTS LIST FOR CV MBC. Engine Oil Grade: Above 40 F=SAE 30 Below 40 F=SAE10W-30 Engine Oil Capacity: Pump Oil Capacity:
The by Mi-T-M PARTS LIST FOR CV-2100-0MBC Engine Oil Grade: Above 40 F=SAE 30 Below 40 F=SAE10W-30 Engine Oil Capacity: 20 oz. Pump Oil Grade: Mi-T-M Pump Oil #AW-4085-0016 Pump Oil Capacity: 4.5 oz. Nozzle
More information8650 Enterprise Drive, Peosta IA / Fax PARTS LIST FOR JP ME1/0ME3
8650 Enterprise Drive, Peosta IA 52068 563-556-7484 / Fax 563-556-1235 PARTS LIST FOR JP-3004-0ME1/0ME3 Motor Horsepower: 8 H.P. Pump Oil Grade: Mi-T-M Pump Oil #AW-4085-0016 Pump Oil Capacity: 18.5 oz.
More informationArimitsu Pumps offers an extensive product range HP 392 GPM 24,000 PSI
Arimitsu Pumps offers an extensive product range 2-400 HP 392 GPM 24,000 PSI Improve Productivity Fast & Simple Maintenance Increase Reliability of Operations Control Energy Consumption/ Cost arimitsupumps.com
More information8650 Enterprise Drive, Peosta IA / Fax PARTS LIST FOR JP ME1/0ME3
8650 Enterprise Drive, Peosta IA 52068 563-556-7484 / Fax 563-556-1235 PARTS LIST FOR JP-2503-0ME1/0ME3 Motor Horsepower: 6 H.P. Pump Oil Grade: Mi-T-M Pump Oil #AW-4085-0016 Pump Oil Capacity: 18.5 oz.
More informationPARTS LIST FOR AIR COMPRESSORS 15 Hp Industrial Duplex. Copyright 2009, Mi-T-M Corporation
PARTS LIST FOR AIR COMPRESSORS 15 Hp Industrial Duplex 1 This Parts Listing has been compiled for your benefit. You can be assured your Mi-T-M Gasoline Air Compressor was constructed and designed with
More information8650 Enterprise Drive, Peosta IA / Fax PARTS LIST FOR JP MHB/VB
8650 Enterprise Drive, Peosta IA 52068 319-556-7484 / Fax 319-556-1235 PARTS LIST FOR JP-2003-0MHB/VB Engine Oil Grade: Honda: SAE 10 W-30 Vanguard: Above 40 F=SAE30/Below 40 F=SAE10W-30 Engine Oil Capacity:
More informationTerm & Condition. Terms: Net 30 days, Credit card payment 2% discount (at time of order)
Term & Condition Terms: Net 30 days, Credit card payment 2% discount (at time of order) Freight: Equipment:: Please contact your Manufactures Representative for special freight programs. Parts: order greater
More information8650 Enterprise Drive, Peosta IA / Fax BELOW 40 F=SAE10W-30 ENGINE OIL CAPACITY:
8650 Enterprise Drive, Peosta IA 52068 563-556-7484 / Fax 563-556-1235 PARTS LIST FOR CWC-4005-1MGH (AFTER SERIAL #10005894) CWC-4005-1MGV (AFTER SERIAL #10005894) CWC-5004-1MGH (AFTER SERIAL #10020492)
More informationINDUSTRIAL PUMPS PARTS MANUAL MODELS: M-03 D-03 M-23 M-24 G-03 G-13 WANNER ENGINEERING, INC. IMPORTANT
PARTS MANUAL IMPORTANT Record your pump model number and serial number here for easy reference: INDUSTRIAL PUMPS MODELS: M-03 D-03 M-23 M-24 G-03 G-13 Model No. Serial No. Date of Purchase When ordering
More informationCW MGH/3MGV (AFTER SERIAL #317278)
8650 Enterprise Drive, Peosta IA 52068 563-556-7484 / Fax 563-556-1235 PARTS LIST FOR CW-1504-3MGH/3MGV (AFTER SERIAL #317278) Engine Oil Grade: Honda: SAE10W-30 Briggs & Stratton Vanguard: Above 40 F=SAE
More informationInstallation, Operation, Repair and Parts Manual
2000 PLUNGER PUMPS Form 500PL Installation, Operation, Repair and Parts Manual 2-03 Description PowerLine Plus 2000 plunger pumps are designed for pumping water, soap, detergent, and other nonflammable
More informationPage 1 of 9 303-01C Engine 6.0L Diesel 2004 F-Super Duty 250-550/Excursion DESCRIPTION AND OPERATION Procedure revision date: 08/06/2003 Engine Printable View Engine Description The 6.0L diesel engine
More informationENGINE MECHANICAL SPECIFICATIONS
GENERAL DESCRIPTION The 1955 Cadillac engine is of the V-8,overhead valve design, with a 3-13/16" bore and a 3-5/8" stroke to provide a piston displacement of 331 cubic inches. The compression ratio is
More informationPump Parts Breakdown
Pump Parts Breakdown H8191 3600 PSI Diesel Pressure Washer -23- Pump Parts List 1 PSB20M CAP SCREW M5-.8 X 14 43 PH81910043 VALVE JACKET WATER RETURN 2 PH81910002 OIL GAUGE 44 PH81910044 VALVE JACKET OUTER
More informationMODELS: G-20, G-21, G-22
PARTS MANUAL G20-991-2402A IMPORTANT Record your pump model number and serial number here for easy reference: Model No. MODELS: G-20, G-21, G-22 Serial No. Date of Purchase When ordering parts or making
More information8650 Enterprise Drive, Peosta IA / Fax PARTS LIST FOR CW MGH/V. Below 40 F=SAE10W-30 Engine Oil Capacity:
8650 Enterprise Drive, Peosta IA 52068 563-556-7484 / Fax 563-556-1235 PARTS LIST FOR CW-3504-4MGH/V Engine Oil Grade: Above 40 F=SAE30 Below 40 F=SAE10W-30 Engine Oil Capacity: Honda 37 oz. Vanguard 50.7
More informationDATA SHEET 2SF10ES, 2SF20ES, 2SF22ES, 2SF22ELS, 2SF29ELS, 2SF30ES, 2SF35ES 2SF30GS, 2SF35GS DIRECT DRIVE PLUNGER PUMPS
DATA SHEET DIRECT DRIVE PLUNGER PUMPS Brass Electric Models: Brass Gas Models: 2SF10ES, 2SF20ES, 2SF22ES, 2SF22ELS, 2SF29ELS, 2SF30ES, 2SF35ES 2SF30GS, 2SF35GS FEATURES Model 2SF10ES Shown (Unloader included
More informationDrawing A Crankcase TS 410, TS 420 SCS
Drawing A Crankcase 1 Drawing A Crankcase Reference Item number Qty Description 1 4238 020 2901 1 Crankcase 2-4 2 9503 003 0351 1 Grooved ball bearing 15x36.3x11 3 0000 953 6606 3 Stud 4 9630 951 1696
More informationMcGUIRE AIR COMPRESSORS HP RECIPROCATING AIR COMPRESSORS. R-Series. McGUIRE AIR COMPRESSORS
2 30 RECIPROCATING AIR COMPRESSORS R-Series CHAMPION R-SERIES Customized Solutions Unparalleled Performance A Winning Combination Champion compressors are proven units, known for their reliability over
More informationPARTS LIST FOR CM MEH (AFTER SERIAL # ) Copyright 2007, Mi-T-M Corporation
PARTS LIST FOR CM-1400-0MEH (AFTER SERIAL #10568358) Motor Horsepower: Pump Oil Grade: Pump Oil Capacity: Nozzle Size: 1.5 H.P. Mi-T-M Pump Oil #AW-4085-0016 11.2 oz..95 mm 1 This Parts Listing has been
More informationHydracel High Pressure Pump
Hydracel High Pressure Pump Mfg: Hydracell Model: D10 SL SE SHEHC Stock No. HDPH038.5a Serial No. 99260 Hydracell High pressure Pump. Model D10 SL SE SHEHC, S/N 99260. Inlet (1) 1-1/2 in., Outlet (1) 1
More informationThe TR-Series are large volume,
HYDROSTATIC TEST PUMPS Model TR-Series U p to 5.5GPM 5000PSI HYDRO INC. 3500 Arrowhead Drive Carson City Nevada 89706 web site: www.ricehydro.com e-mail: ricehydro@ricehydro.com Phone: (775) 885-1280 Fax:
More informationCOMPRESSORS 09/97 CB-5C-050. Suggested Spare Parts for LB601 and LB601A Compressors: Qty./ Unit
09/97 CB-5C-050 Suggested Spare Parts for LB601 and LB601A Compressors: Part # Description Qty./ Unit Comm. Qty. 794099 Gasket Set - Buna-N, Aluminum T 1 1 1 794259 Suction Valve Sub-Assembly T 2 2 794279
More informationPARTS LIST FOR CM MEH. Copyright 2015, Mi-T-M Corporation
PARTS LIST FOR CM-1400-1MEH Motor Horsepower: Pump Oil Grade: Pump Oil Capacity: Nozzle Size: 1.5 H.P. Mi-T-M Pump Oil #AW-4085-0016 11.2 oz..95 mm 1 This Parts Listing has been compiled for your benefit.
More informationCV MBC (AFTER SERIAL #322055)
The by Mi-T-M PARTS LIST FOR CV-1750-0MBC (AFTER SERIAL #322055) Engine Oil Grade: Above 40 F=SAE 30 Below 40 F=SAE10W-30 Engine Oil Capacity: 20 oz. Pump Oil Grade: Mi-T-M Pump Oil #AW-4085-0016 Pump
More informationSafety Certifications
Safety Certifications Mi-T-M builds safe, reliable products. In the U.S., UL and CSA International is accredited by the Occupational Health and Safety Administration (OSHA) as a Nationally Recognized Testing
More informationLB601B PARTS LIST COMPRESSORS CB-5E /06. Bulletins Needed For Complete Parts List. Gasket Set, Repair Kits and Special Tools
COMPRESSORS CB-5E-051 2011/06 LB601B PARTS LIST Serial # ID# Gasket Set, Repair Kits and Special Tools Gasket Set Buna-N & Aluminum 794099 Top End Repair Kit 794237 Includes Piston Rings & Expanders, Packing
More informationSeries CP200. Triplex Ceramic Plunger Pump Operating Instructions/ Repair and Service Manual. For Models: CP218 CP219 CP220 CP230
Series CP200 Triplex Ceramic Plunger Pump Operating Instructions/ Repair and Service Manual For Models: CP218 CP219 CP220 CP230 Updated 10/02 Contents: Installation Instructions: page 2 Pump Specifications:
More informationModels: D-03, G-03, G-13 and M-03
Parts Manual D03-991-2402C Models: D-03, G-03, G-13 and M-03 Kel-Cell and Standard Versions IMPORTANT Record your pump model number and serial number here for easy reference: Model No. Serial No. Date
More informationPARTS LIST FOR CBA MHB (AFTER SERIAL # ) CBA MVB
PARTS LIST FOR CBA-3504-0MHB (AFTER SERIAL #10202373) CBA-3504-0MVB Engine Oil Grade: Honda: Vanguard: Engine Oil Capacity: Honda: Vanguard: SAE10W-30 Above 40 F = SAE30 Below 40 F = SAE10W-30 37 oz. 51
More informationFigure 1 - RMW /SRMW. Max GPM Max PSI Model. normal use and service in a manner up to the directions and usage recommended
(9) /(9) N/A Side Cover LIMITED WARRANTY N/A Rear Cover (9) Valve Cap N/A Connecting Rods WARRANTY RETURNS Items returned for warranty consideration must have a Returned Merchandise Authorization (RMA)
More informationPARTS LIST FOR 4004 SERIES PORTABLE/ALUMINUM GASOLINE DRIVEN/BELT DRIVE COLD WATER PRESSURE WASHER
PARTS LIST FOR 4004 SERIES PORTABLE/ALUMINUM GASOLINE DRIVEN/BELT DRIVE COLD WATER PRESSURE WASHER Engine Oil Grade: SAE 10W-30 Engine Oil Capacity: Honda 37 oz. Pump Oil Grade: Pump Oil #AW-4085-0016
More informationINDUSTRIAL PUMPS MODEL: D-35-SD PARTS MANUAL SLURRY DUTY PUMP WANNER ENGINEERING, INC. IMPORTANT
PARTS MANUAL INDUSTRIAL PUMPS IMPORTANT Record your pump model number and serial number here for easy reference: Model No. MODEL: D-35-SD SLURRY DUTY PUMP Serial No. Date of Purchase When ordering parts
More informationFMC Technologies Bean piston pumps are unsurpassed within the vertical drilling markets.
FMC BEAN FMC Technologies Bean piston pumps are unsurpassed within the vertical drilling markets. WATER esigned for continuous duty applications, the FMC Technologies Bean piston line increases drilling
More informationOPERATOR S MANUAL. To locate your local Kärcher Commercial Pressure Washer Dealer nearest you visit
OPERATOR S MANUAL MODEL ORDER # MODEL HD 2.0/10 Ed 1.575-250.0 DE-201007D HD 1.9/15 Ed 1.575-251.0 DE-201507D HD 2.8/10 Ed 1.575-252.0 DE-301007D HD 3.5/20 Ea 1.575-253.0 DE-352007A To locate your local
More informationModel No. EK8100 POWER CUTTER
1 / 7 2 / 7 3 / 7 4 / 7 5 / 7 6 / 7 7 / 7 1 / 5 Item Parts No. Description I/C Qty N/O Opt. 1 Opt. 2 Note 001 168507-3 TANK CAP COMPLETE 1 D10 INC. 2 002 213080-9 O RING 29.5 1 003 163499-1 SUCTION HEAD
More informationMite Mfg Co.098 Diesel X SIZE R0.217" " deep R0.111" Drill #21. Tap Drill #50. 1/4" deep on " PCD Tap 2-56 (3 places) R0.
0.100" 0.074" 0.766" Ø0.398" Ø0.188" 25 Ø0.312" Ø0.125" 0.552" Ø0.250" (ream) 0.306" 0.166" 0.535" Ø0.775" Ø0.716" Screw cut 32 TPI 0.019 " deep -1 CRANKCASE Magnesium Die Casting with cast-in bronze bush
More informationPARTS LIST FOR AIR COMPRESSOR/GENERATOR/WELDER AGW-SR14-30M AGW-SR14-B
PARTS LIST FOR AIR COMPRESSOR/GENERATOR/WELDER AGW-SR14-30M AGW-SR14-B ENGINE: SUBARU ENGINE OIL GRADE: SAE 10W-30 ENGINE OIL CAPACITY: 40.5 oz. MAXIMUM PRESSURE: COMPRESSOR OIL GRADE: COMPRESSOR OIL CAPACITY:
More informationTABLE OF CONTENTS. Look for this symbol to find quantity discounts and knock off another 2 or 5% from your cost.
TABLE OF CONTENTS ITEM PAGE ITEM PAGE ITEM PAGE Adapters, (22mm) 45 General Unloaders 18, 19 Rotating Nozzles 28 AR Pump Kit Chart 5 Giant Kits, Parts, & Pump 16, 17 Rotobrush 48 AR Pump Kits & Parts 6
More informationPARTS LIST FOR CW ME3 (AFTER SERIAL # )
PARTS LIST FOR CW-5004-0ME3 (AFTER SERIAL #10235166) Motor Horsepower: 15 HP Pump Oil Grade: Mi-T-M Pump Oil #AW-4085-0016 Pump Oil Capacity: 31.0 oz. Nozzle Size: 3.5 This Parts Listing has been compiled
More informationCompressor MODEL 05G $3.00
Compressor MODEL 0G -0 $.00 Service Parts List MODEL 0G COMPRESSOR CONTENTS INTRODUCTION... I ORDERING INSTRUCTIONS... I GENERAL NOTES... i. TOOLS / OILS / FITTINGS.... CRANKCASE AND SUCTION SERVICE VALVE....
More informationQRDT. an EnPro Industries company QUINCY QRDT SERIES TWO-STAGE, OIL-LESS RECIPROCATING AIR COMPRESSORS 5-30 HP
QRDT an EnPro Industries company QUINCY QRDT SERIES TWO-STAGE, OIL-LESS RECIPROCATING AIR COMPRESSORS 5-30 HP QUINCY QRDT TWO-STAGE, OIL-LESS Clean, oil-free air Quincy dependability Setting the oil-less
More informationEXPLODED VIEW SERVICE MANUAL PRESSURE WASHER PSI Models Rev. 08/12. (Reversed View) (Reversed View) WARNING
SERVICE MANUAL PRESSURE WASHER 26 2 EXPLODED VIEW 14 (Reversed View) 3 18 22 1 17 27 This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive
More informationPARTS LIST FOR GC MAH and GC MGH (GRAINGER ITEM #6CGP0 AND #6CGP1) COLD WATER PRESSURE WASHER (AFTER SERIAL # )
PARTS LIST FOR GC-5004-3MAH and GC-6004-3MGH (GRAINGER ITEM #6CGP0 AND #6CGP1) COLD WATER PRESSURE WASHER (AFTER SERIAL #10738662) MANUFACTURED FOR W.W. GRAINGER INC. FOR REPLACEMENT PARTS CALL GRAINGER
More informationCW-2505/3004-3MDY PARTS LIST
8650 Enterprise Drive, Peosta IA 52068-0050 319-556-7484 / Fax 319-556-1235 CW-2505/3004-3MDY PARTS LIST ENGINE OIL GRADE: 30W ENGINE OIL CAPACITY: 28 oz. PUMP OIL: MI-T-M #AW-4085-0016 PUMP OIL CAPACITY:
More informationCorken Compressor Repair
Corken Compressor Repair Click photo to make move Gauge Openings Inspection plate with model and serial #s Oil filter and oil pump assembly Crankcase breather vent Crankcase breather location. If excess
More informationIntroduction WISCONSIN ROBIN WR-WOI-21 OPM REV DATE: This catalog is designed to identify Wisconsin Robin parts.
WISCONSIN ROBIN WR-WOI- OPM REV DATE: 0- Introduction This catalog is designed to identify Wisconsin Robin parts. When ordering parts, it is always advisable to list the engine model, specification number
More informationS/N 1H019H - 1H310H Page 1 of 33 46" Cutting Deck Assembly
1180 S/N 1H019H - 1H310H Page 1 of 33 46" Cutting Deck Assembly 1180 S/N 1H019H - 1H310H Page 2 of 33 46" Cutting Deck Assembly 1 17982 1 S Reinforcement Spindle Plate 2 618-0430 1 S Spindle Assembly w/
More informationDATA SHEET 2SFX20ES, 2SFX22ES, 2SFX30ES, 2SFX30GES 2SFX30GS, 2SFX30GZ DIRECT DRIVE PLUNGER PUMPS. Brass Electric Models: Brass Gas Models:
DATA SHEET DIRECT DRIVE PLUNGER PUMPS Brass Electric Models: Brass Gas Models: 2SFX20ES, 2SFX22ES, 2SFX30ES, 2SFX30GES 2SFX30GS, 2SFX30GZ Model 2SFX30GS Shown (Unloader and by-pass hose included with pump)
More informationINDUSTRIAL PUMPS MODEL: D-35 PARTS MANUAL WANNER ENGINEERING, INC. IMPORTANT
PARTS MANUAL INDUSTRIAL PUMPS IMPORTANT Record your pump model number and serial number here for easy reference: MODEL: D-35 Model No. Serial No. Date of Purchase When ordering parts or making inquiries
More informationModel No: PWDM3600. Parts Information: Pressure Washer 290bar 900ltr/hr 10hp Diesel
Page 1 of 6 1 PWDM3600.01 SCREW (M5x42) 2 PWDM3600.02 GUN HOOK 3 FWM6.S FLAT WASHER M6 SINGLE 4 NLN6.S NYLOC NUT M6 ZINC DIN 985 (SINGLE) 5 PWDM3600.05 UPPER FRAME 6 PWDM3600.06 HOSE HOOK 7 PWDM3600.07
More informationHP RECIPROCATING AIR COMPRESSORS. Engine Driven
9.1 22.5 HP RECIPROCATING AIR COMPRESSORS Engine Driven CHAMPION ENGINE DRIVEN Service trucks, contractors, and farmers all need a reliable compressor that will be suitable for the tools they will use.
More informationModel: D-10. Parts Manual D B. with non-metallic pump head WANNER ENGINEERING, INC. IMPORTANT
Parts Manual D10-991-2403B Model: D-10 with non-metallic pump head IMPORTANT Record your pump model number and serial number here for easy reference: Model No. Serial No. Date of Purchase When ordering
More informationDATA SHEET 4DX10ER, 4DX15ER, 4DX20ER, 4DX27ER, 4DX30ER DIRECT DRIVE PLUNGER PUMPS. Brass Electric Models: SPECIFICATIONS U.S. Measure Metric Measure
DATA SHEET DIRECT DRIVE PLUNGER PUMPS Brass Electric Models: 4DX10ER, 4DX15ER, 4DX20ER, 4DX27ER, 4DX30ER See page 8 for complete pump model number selection. FEATURES Fits standard 56C face motors. Stacked
More informationHP RECIPROCATING AIR COMPRESSORS. Engine Driven
9.1 22.5 HP RECIPROCATING AIR COMPRESSORS Engine Driven GARDNER DENVER ENGINE DRIVEN Service trucks, contractors, and farmers all need a reliable compressor that will be suitable for the tools they will
More informationPARTS LIST FOR WP MHB/RB
PARTS LIST FOR WP-4000-4MHB/RB Engine Oil Grade: HONDA/ SUBARU: SAE10W-30 Engine Oil Capacity: 20 oz. Pump Oil Grade: Mi-T-M Pump Oil AW-4085-0016 Pump Oil Capacity: 16 oz. nozzle Size: 3.0 This Parts
More informationHydra-Cell T80 Series Pumps Design Advantages
Hydra-Cell T80 Series Pumps Design Advantages An Economical and Environmental Choice Hydra-Cell is a positive displacement, multiple-diaphragm pump featuring a seal-less design that provides full containment
More informationHOMOLOGATION OF KART ENGINE PROVISIONAL
HOMOLOGATION OF KART ENGINE Category MSA Cadet Manufacturer IAME Model Parilla Gazelle 60cc U.K. Valid From 01 January 2013 Number of pages of main fiche 16 This Homologation Form reproduces descriptions,
More informationPARTS LIST FOR GC-1002/1502-0ME1 (GRAINGER ITEM #3WB86 AND #3WB87) COLD WATER PRESSURE WASHER (AFTER SERIAL # )
PARTS LIST FOR GC-1002/1502-0ME1 (GRAINGER ITEM #3WB86 AND #3WB87) COLD WATER PRESSURE WASHER (AFTER SERIAL #10817968) MANUFACTURED FOR W.W. GRAINGER INC. FOR REPLACEMENT PARTS CALL GRAINGER PARTS 800-323-0620
More informationReliability. Versatility. Economic Quality. Commitment to Support
Reliability General Pump products have been industry-tested world-wide for over 35 years. General Pump is affiliated with the world s largest manufacturer of high-pressure water plunger pumps and accessories.
More informationPARTS LIST FOR CW-2505/3004-3MGH/3MGV. Copyright 1998, Mi-T-M Corporation 1 EX
PARTS LIST FOR CW-2505/3004-3MGH/3MGV Engine Oil Grade: HONDA: VANGUARD: ENGINE Oil Capacity: HONDA: VANGUARD: SAE10W-30 Above 40 f=sae30 below 40 f=sae10w-30 37 oz. 51 oz. Pump Oil: Pump Oil Capacity:
More informationP300 Series - 16 & 18 mm versions. Triplex Ceramic Plunger Pump Operating Instructions/ Repair and Service Manual
P300 Series - 16 & 18 mm versions Triplex Ceramic Plunger Pump Operating Instructions/ Repair and Service Manual For Models: P316, P317, P319, P322, P323, P325 & P340 Updated 06/13 Contents: Installation
More informationH8190 Pump Parts Breakdown
H8190 Pump Parts Breakdown -30- H8189/H8190 Gasoline Pressure Washer H8190 Pump Parts List 1 PH8189001 CRANK CASE COVER BOLT 51 PH8189051 VALVE JACKET INNER GASKET 2 PH8189002 OIL DRAIN PLUG 52 PH8189052
More informationDrawing A Crankcase. Drawing A Crankcase
Drawing A Crankcase Drawing A Crankcase 1 4238 020 2901 1 Crankcase 2-4 2 9503 003 0351 2 Grooved ball bearing 15x36.3x11 3 0000 953 6606 3 Stud 4 9630 951 1696 1 Oil seal 15x26x7 5 4238 020 2605 1 Crankcase,
More informationThe EL-FHT is a. The FH-series line of fire hose testers, offers testing. Pressure Wands Fire Hose Testers Hose Restraints Hand Pumps MINI HOSE TESTER
FH Series The FH-series line of fire hose testers, offers testing pressures up to 1,000 PSI, with flow rates up to 10 GPM. Gas, Electric, and Diesel driven models, designed to safely test fire hose up
More informationROLLER PUMPS. Hypro Roller Pumps. Max RPM. Max PSI Series - 6 Roller Pump Series - 5 Roller Pump Series - 4 Roller Pump
ROLLER Hypro Roller Pumps GPM PSI RPM 1502C 62 150 1000 1502N 62 150 1000 1502XL 62 150 1000 1700C 45 200 1000 1700N 45 200 1000 1700XL 45 200 1000 4001C-A 9 150 1800 1500 Series - 6 Roller Pump Cast-iron
More information