SKU Description Manufacturers No. Additional Details. 03-4/01005 PLUG 19 WAY DOUBLE DENSITY W/O Ithemba 2DE19P-FO
|
|
- Leo Ellis
- 6 years ago
- Views:
Transcription
1 Page: 1 / /01001 PLUG 9 WAY BURGUN D' W/O PINS Ithemba DEU9P-FO 03-4/01002 SOCKET, 9 WAY BURGUN D' W/O SOCKETS Ithemba DEU9S-FO 03-4/01003 PLUG 15 WAY BURGUN D' W/O PINS Ithemba DAU15P-FO 03-4/01004 SOCKET, 15 WAY BURGUN D' W/O SOCKETS Cinch DAU15S-FO 03-4/01005 PLUG 19 WAY DOUBLE DENSITY W/O Ithemba 2DE19P-FO 03-4/01006 SOCKET, 19 WAY DOUBLE DENSITY W/O SOCKETS Ithemba 2DE19S-FO 03-4/01007 PLUG 37 WAY BURGUN D' W/O PINS Ithemba DCU37P-FO 03-4/01008 SOCKET, 37 WAY BURGUN D' W/O SOCKETS Ithemba DCU37S-FO 03-4/01009 PLUG 50 WAY BURGUN D' W/O PINS Ithemba DDU50P-FO 03-4/01010 SOCKET, 50 WAY BURGUN D' W/O SOCKETS Ithemba DDU50S-FO 03-4/01011 PLUG 52 WAY DOUBLE DENSITY W/O PINS Ithemba 2DB52P-FO 03-4/01012 SOCKET, 52 WAY DOUBLE DENSITY W/O SOCKETS Ithemba 2DB52S-FO (USE 3-4/1039), FOR USE WITH BURGUN D SERIES ONLY (USE 3-4/1046), FOR USE WITHIN BURGUN D SERIES ONLY (USE 3-4/1039), FOR USE WITH BURGUN D SERIES ONLY (USE 3-4/1046), FOR USE WITHIN BURGUN D SERIES ONLY PINS (USE ) (USE 3-4/1048) (USE 3-4/1039), FOR USE WITHIN BURGUN D SERIES ONLY (USE 3-4/1046), FOR USE WITHIN BURGUN D SERIES ONLY (USE 3-4/1039), FOR USE WITHIN BURGUN D SERIES ONLY (USE 3-4/1046), FOR USE WITHIN BURGUN D SERIES ONLY (USE 3-4/1047) (USE 3-4/1048) 03-4/01013 LOCK RETAINER USE WITH 15 PIN BURGUN D' & 31 PIN DD'S Ithemba DA /01014 LOCK RETAINER USE WITH 37 PIN BURGUN D' Ithemba DC /01015 LOCK RETAINER USE WITH 50 PIN BURGUN D' Ithemba DD /01016 SLIDE POST FOR ALL CANNON D & 2D SLIDELOCK RETAINERS Ithemba D /01017 LEMO RECEPTACLE LEMO - PANEL MTG. - RECEPTACLE,SIZE 0,2 PIN. LEMO ERA.OS.302.CLL EACH PACK CONSISTS OF 2 SETS (EA SET 1 SCREW NUT & WASHERS) 03-4/01018 LEMO RECEPTACLE LEMO - PANEL MTG. - RECEPTACLE,SIZE 0,3 PIN. LEMO ERA.OS.303.CLL 03-4/01020 LEMO RECEPTACLE LEMO - BULKHEAD - FEMALE,SIZE 00,COAXIAL.C/W REAR CABLE CLAMP LEMO PSA CTLC27
2 Page: 2 / /01021 LEMO PLUG LEMO - STRAIGHT - MALE,SIZE 0,2 PIN.RAD HARD LEMO FFA.0S.302.CLAC /01022 LEMO PLUG LEMO - STRAIGHT - MALE,SIZE 0,3 PIN.RAD HARD LEMO FFA.0S.303.CLAC /01024 TIP JACK, RED METAL CLAD, MILITARY RED Johnson USE COLLETS 3-4/1065 THROUGH 3-4/ /01025 TIP JACK, BLACK METAL TIP, MILITARY BLACK Johnson /01026 TIP PLUG RED E-Z Hook 9258 RED 03-4/01027 TIP PLUG SUB-MINIATURE TIP PLUG - BLACK " DIA. TIP. E-Z Hook 9258 BLACK 03-4/01028 CRIMP TERMINAL RING TONGUE, 3/8" STUD, UNINSULATED, 8 AWG AMP /01029 CRIMP TERMINAL RING TONGUE, 3/8" STUD, UNINSULATED, 6 AWG AMP /01030 CRIMP TERMINAL RING TONGUE, 3/8" STUD, UNINSULATED, 4 AWG AMP /01031 CRIMP TERMINAL RING TONGUE, 3/8" STUD, UNINSULATED, 2 AWG AMP /01032 CRIMP TERMINAL RING TONGUE, 3/8" STUD, UNINSULATED, 1/0 AWG AMP /01033 CRIMP TERMINAL RING TONGUE, 3/8" STUD, UNINSULATED, 4/0 AWG AMP /01039 PINS SIZE 20 FOR CANNON BURGUN D' CONNECTORS Ithemba /01040 PLUG 31 WAY DOUBLE DENSITY W/O PINS Ithemba 2DA31P-FO 03-4/01041 SOCKET, 31 WAY DOUBLE DENSITY W/O SOCKETS Ithemba 2DA31S-FO CRIMP 1-3/1017 CRIMP 1-3/1017 CRIMP 1-3/1017 CRIMP 1-3/1017 CRIMP 1-3/1017 CRIMP 1-3/1017 SEE CRIMPER 1-3/1001 (USE 3-4/1047) FOR NIM PIN EXTRACTION (USE 3-4/1048) 03-4/01042 NYLON HOOD FOR 15 & 31 CONNECTORS Ithemba DA /01043 SOCKET, 25 WAY BURGUN D' W/O SOCKETS Ithemba DBU25S-FO 03-4/01044 PLUG 25 WAY BURGUN D' W/O PINS Ithemba DBU25P-FO 03-4/01045 NYLON HOOD FOR 25 WAY 'D' 7 52 WAY 'DD' CONNECTORS AMP /01046 SOCKETS, SIZE 20 FOR BURGUN D' Ithemba (USE 3-4/1046) FOR USE WITHIN BURGUN D' SERIES ONLY CAN BE INSTALLED AFTER CABLE ASSY. SEE CRIMPER 1-3/ /01047 PINS DOUBLE DENSITY Ithemba /01048 SOCKETS DOUBLE DENSITY Ithemba /01049 NYLON HOOD FOR 37 WAY BURGUN D' CONNECTOR Ithemba DC
3 Page: 3 / /01051 LOCK RETAINER USE WITH 52 & 25 WAY CONNECTORS Ithemba DB /01052 LOCK RETAINER USE WITH 9 WAY BURGUN D' & 19 WAY DD'S Ithemba DE /01053 CRIMP TERMINAL PARALLEL SPLICE, UNINSULATED, AWG AMP /01054 CRIMP TERMINAL RING TONGUE, UNINSULATED, AWG, #8 STUD AMP /01056 BNC JACK STRAIGHT Amphenol /01057 BNC ADAPTER PLUG-PLUG Kings KC USE WITH RG58-RG58/U & RG58C/U CRIMP 1-3/1046, DIE 03-4/01058 BNC ADAPTER JACK-JACK Kings KC /01059 NYLON HOOD FOR 9 & 19 WAY CONNECTORS Ithemba DE /01060 BNC PLUG CRIMP TYPE Amphenol /01061 AMP CRIMP TERMINAL FASTON, BLUE INSULATED FOR AWG, TAB AMP /01064 COLLET LEMO COLLET - SIZE '00'.FOR 3.2mm (0.1260") O.D. CABLE. LEMO 00 S/3.2 USE WITH RG179 & RG187 CRIMP 1-3/ /01065 COLLET LEMO COLLET - SIZE '0'.FOR 2.7mm (0.1063") O.D. CABLE. LEMO 0 S/ /01069 CRIMP TERMINAL RING TONGUE, YELLOW INSULATED FOR AWG, #8 STUD 03-4/01070 CRIMP TERMINAL RING TONGUE, YELLOW INSULATED FOR AWG, #2 STUD 03-4/01071 CRIMP TERMINAL SPADE TONGUE, FLANGED, YELLOW INSULATED FOR AWG, #2 03-4/01072 CRIMP TERMINAL FASTON, YELLOW INSULATED FOR AWG,.110 TAB AMP AMP (OBSOLETE) AMP Molex (OBSOLETE) 03-4/01073 CRIMP TERMINAL FASTON, RED INSULATION FOR AWG,.110 TAB Molex /01074 TAB DOUBLE ENDED, 180 deg, SIZE.250 X Molex /01076 TAB DOUBLE ENDED, 90 deg, SIZE.250 X BEAU /01079 TAB DOUBLE ENDED, 90 deg, SIZE.110 X Molex /01081 CRIMP TERMINAL FASTON, BLUE INSULATN FOR AWG,.250 TAB Molex CRIMP 1-3/1037 CRIMP 1-3/1037 CRIMP 1-3/1035 CRIMP 1-3/1036 MOUNT ON 3-4/1085 MOUNT ON 3-4/1085 MOUNT ON 3-4/1083,83,89,97, TERMINAL 3-4/1072,73,98 INS.EXT 1-3/1034
4 Page: 4 / /01084 JUMPER SHORTING, BARRIER STRIP, ADJACENT CONTACTS, SCREW SIZE #2 Molex /01085 BARRIER TERMINAL STRIP 12 WAY, SCREW SIZE 6 X 32, 250V 20A MAX Molex /01086 CRIMP TERMINAL RING TONGUE, BLUE INSULATED FOR AWG, 3/8" STUD AMP /01087 ALLIGATOR CLIP SCREW CONNECTION, 2" LONG Mueller BU-60-S 03-4/01088 PLUG 57 SERIES, 36 PIN, CABLE TO PANEL Amphenol /01090 PIN BLOCK 42 WAY, FOR NIM AMP /01091 METAL HOOD AMP /01092 GUIDE PIN CORNER, CAD. PLATED BRASS. AMP # /01093 GUIDE SOCKET CORNER, CAD. PLATED BRASS AMP /01094 PIN CAD. PLATED BRASS, WIRE SIZE AWG. AMP /01095 GUIDE PIN CORNER, GOLD PLATED AMP /01096 GUIDE SOCKET CORNER, GOLD PLATED AMP /01098 FEED THROUGH TERMINALS "Y" TYPE, NICKEL PLATED Cinch Y /01099 TAG STRIP 3 WAY, CENTRE GROUNDED, SOLDER LOOP Cinch 52A (USE WITH 3-4/1082,83,89,97) USE TAB 3-4/1074,75,76 CRIMP 3-4/1032 FOR USE ON ANALOGIC MUX/ADC MATE 3-4/1215, PIN 3-4/1094 FOR 3-4/1090 FOR 3-4/1090 FOR 3-4/1090 CRIMP 1-3/1039 FOR 3-4/1090 FOR 3-4/1090 FOR 3-4/1090 FOR SCREW SIZE #2 USE WITH 3-4/1082,83,89, /01101 CIRCULAR CONNECTOR MS, STRAIGHT PLUG, 8 CONTACT, SIZE 16 PINS, MIL /01102 CIRCULAR CONNECTOR MS, STRAIGHT PLUG, 8 CONTACT, SIZE 16 SOCKETS, MIL Amphenol A-22-18P Amphenol A-22-18S 03-4/01103 CIRCULAR BOX RECEPTACLE MS, 8 CONTACT, SIZE 16 PIN, MIL Amphenol A-22-18P 03-4/01104 CIRCULAR BOX RECEPTACLE MS, 8 CONTACT, SIZE 16 SOCKETS, MIL /01105 CIRCULAR CONNECTOR MS, STRAIGHT PLUG, 16 CONTACTS, SIZE 16 PINS, MIL /01106 CIRCULAR CONNECTOR MS, STRAIGHT PLUG, 16 CONTACTS, SIZE 16 SOCKETS, MIL Amphenol A-22-18S Amphenol A-24-7P Amphenol A-24-7S
5 Page: 5 / /01107 CIRCULAR BOX RECEPTACLE MS, 16 CONTACTS, SIZE 16 PIN, MIL Amphenol A-24-7P 03-4/01109 CRIMP TERMINAL RING TONGUE, YELLOW INSULATED FOR AWG, #6 STUD, CRIMP 03-4/01110 CRIMP TERMINAL RING TONGUE, YELLOW INSULATED FOR AWG, #4 STUD, CRIMP AMP AMP /01111 METAL HOOD FOR SIZE D SHELL Ithemba DD /01112 CABLE CLAMP & BOOT Amphenol AN C/W AN /01113 CABLE CLAMP & BOOT Amphenol /01114 LEMO 4 CONTACT CONNECTOR LEMO - STRAIGHT - MALE,SIZE 0,4 PIN,4.2mm LEMO FFA.OS.304.CLAC /01115 LEMO RECEPTACLE LEMO - PANEL - FEMALE,SIZE 0,4 PIN.RAD HARD. LEMO ERA.0S.304CLL 03-4/01116 CIRCULAR CONNECTOR MS, STRAIGHT PLUG, 10 CONTACTS, SIZE 16 PINS Amphenol A-18-1P 03-4/01117 CABLE CLAMP C/W BUSHING Amphenol C/W /01118 CRIMP TERMINAL FLANGED SPADE TONGUE, BLUE INSULATED FOR AWG, #6 STUD 03-4/01119 CRIMP TERMINAL SPRING SPADE TONGUE, YELLOW INSULATED FOR AWG, #4 STUD 03-4/01120 CRIMP TERMINAL SPRING SPADE TONGUE, YELLOW INSULATED FOR AWG, #6 STUD 03-4/01121 CRIMP TERMINAL SPRING SPADE TONGUE, RED INSULATED FOR AWG, #6 STUD 03-4/01122 CRIMP TERMINAL SPRING SPADE TONGUE, BLUE INSULATED FOR AWG, #6 STUD 03-4/01123 CIRCULAR BOX RECEPTACLE MS, 4 CONTACTS, SIZE 16 SOCKETS MUST BE SHIPPED ASSEMBLED IN UNITS 03-4/01124 CIRCULAR CONNECTOR MS, STRAIGHT PLUG, 4 CONTACTS, SIZE 16 PINS AMP AMP AMP AMP AMP Amphenol A-14S-2S Amphenol A-14S-2P 03-4/01125 CABLE CLAMP Amphenol MS USE WITH 3-4/1101,1102,1103,1104 USE WITH 3-4/1105,1106,1107,1108 COLLET,PAD HARD, MATES WITH 3-4/1115 USE CABLE 3-5/2050 USE WITH 3-4/1129 CRIMP 1-3/1032 CRIMP 1-3/1037 CRIMP 1-3/1037 CRIMP 1-3/1066 CRIMP 1-3/1032 USE WITH 3-4/1124
6 Page: 6 / /01126 BUSHING / BOOT USE WITH 3-4/1124 & 3-4/1125 Amphenol /01127 CABLE CLAMP C/W BUSHING Amphenol C/W /01128 CIRCULAR BOX RECEPTACLE MS, 2 CONTACTS, 12 AWG MUST BE SHIPPED ASSEMBLED IN UNITS Amphenol A-16-11S 03-4/01129 CIRCULAR CONNECTOR MS, STRAIGHT PLUG, 2 CONTACTS, 12 AWG Amphenol A-16-11P USE WITH 3-4/1116 USE CLAMP 3-4/ /01130 TERMINAL BLOCK 2 WAY, 300V 15A MAX Cinch /01131 HEX CONNECTOR 5 CONTACT PIN, C/W HOOD & CLAMP WIRE PRO /01132 HEX CONNECTOR 5 CONTACT SOCKET, PANEL MOUNTING, C/W LOCKING CLIP 03-4/01133 CIRCULAR BOX RECEPTACLE MS, 4 CONTACTS, SIZE 16 PINS MUST BE SHIPPED ASSEMBLED IN UNITS 03-4/01134 CIRCULAR CONNECTOR MS, STRAIGHT PLUG, 4 CONTACTS, SIZE 16 SOCKETS, SOLID SHELL WIRE PRO Amphenol A-14S-2P Amphenol A-14S-2S 03-4/01135 HEX CONNECTOR 7 PIN, C/W HOOD & CLAMP, 500V (RMS)@ SEA LEVEL WIRE PRO /01136 HEX CONNECTOR 7 SOCKET, C/W HOOD & CLAMP, 500V (RMS) WIRE PRO /01137 HEX CONNECTOR 7 PIN, PANEL MOUNTING WITH LOCKING CLIP WIRE PRO /01138 HEX CONNECTOR 7 SOCKET, PANEL MOUNTING WITH LOCKING CLIP WIRE PRO /01139 HEX CONNECTOR 5 PIN, PANEL MOUNTING WITH LOCKING CLIP WIRE PRO /01140 TAG STRIP 2 WAY, SOLDER LOOP Cinch 52B 03-4/01141 LEMO PLUG, C/S LOCKING NUT LEMO - STRAIGHT - MALE, SIZE 0,2 PIN C/W LOCK NUT ASSEMBLY, RAD HARD LEMO FFB.OS.302.CLAC /01142 HEX CONNECTOR 5 SOCKET, C/W HOOD & CLAMP WIRE PRO /01144 TERMINAL, FEED THRU, "Y" TYPE, SCREW SIZE #6 Cinch Y 141 USE WITH 3-4/ /01146 RECEPTACLE "57" SERIES, 14 CONTACT, PANEL MOUNTING, C/W SPRING LOCK 03-4/01147 RECEPTACLE "57" SERIES, 24 CONTACT, PANEL MOUNTING C/W SPRING LOCK Amphenol Amphenol
7 Page: 7 / /01148 LEMO RECEPTACLE LEMO-ANGLE-FEMALE SIZE 00, COAXIAL PCB MOUNT WITH CLEARANCE UNDER BODY LEMO EPK NTN 03-4/01149 BANANA PLUG DUAL, SOLDERLESS, RED 15A ITT Pomona MDP /01150 BANANA PLUG DUAL, SOLDERLESS, BLACK, 15A ITT Pomona MDP /01151 BANANA PLUG SOLDERLESS, RED, 15A, TAKES UP TO 16 AWG WIRE Johnson /01152 BANANA PLUG SOLDERLESS, BLACK, 15A, TAKES UP TO 16 AWG WIRE Johnson /01154 LEMO LOCKNUT - USE WITH 3-4/1155 IN SIZE '0' CABLE ASSEMBLY LEMO FO /01155 LEMO BACKNUT - USE WITH 3-4/1154 IN SIZE '0' CABLE ASSEMBY LEMO FO /01157 RECEPTACLE PRINTED CIRCUIT, 22 POSITION, SPACING, SOLDER LOOP Amphenol /01158 CONNECTOR PCB, 22 DUAL CONTACT, SPACING, SOLDER LOOP EDAC C/W /01159 LEMO PLUG LEMO - ANGLE - MALE,SIZE 00,COAXIAL LEMO FLA CTAC /01160 POST HEADER 40 WAY, DOUBLE ROW, SQUARE PINS (CAMAC ACB-PCB PLUG) AMP /01162 TAPER PIN BLOCK 60 POSITION, 3 COMMON, 20 RANK VERTICAL AMP /01164 TAPER PIN (YELLOW CRIMP TERMANAL) FOR AWG AMP /01165 TAPER PIN BLOCK 10 COMMON AMP /01166 CONNECTOR HOUSING LOCKING CLIP, 2 POSITION, SINGLE ROW AMP /01167 CONNECTOR HOUSING LOCKING CLIP, 7 POSITION, SINGLE ROW AMP /01168 CONTACT LOCKING CLIP, SEL GOLD/NICKEL FINISH, AWG. AMP /01169 POST AMPMODU, 0.025" X 0.025" GOLD/NICKEL, SINGLE ROW AMP /01170 KEYING PLUG AMP USE 3-4/1177 PINS 3-4/1164 CRIMP 1-3/1060, INSERT. 1-3/1061, EXTRACT 1-3/1062 PINS 3-4/1164 POST 3-4/1169, CONTACT 3-4/1168 POST 3-4/1169, CONTACT 3-4/1168 USE CRIMP 1-3/1059 USE WITH 3-4/1168 USE WITH 3-4/166, /01171 RECEPTACLE REUSEABLE COMPONENT, FINISH-TIN-LEAD/GOLD( LEAD DIA) 03-4/01172 RECEPTACLE REUSEABLE COMPONENT, FINISH TIN-LEAD/TIN ( LEAD DIA) AMP AMP
8 Page: 8 / /01173 TERMINAL, BULLET NOSE FINISH COPPER/TIN-LEAD Sealectro /01174 RECEPTACLE & STRAIN RELIEF 25 Way D Submin. Amplimite Receptacle for Ribbon Cable AMP & /01175 PLUG & STRAIN RELIEF 25 way D Submin. Plug for Ribbon Cable AMP /01176 MALE SCREW LOCK TO FIT DE, DA, DC, DD PIN AND SOCKET BLOCKS AMP /01177 RECEPTACLE C/W COVER AND STRAIN RELIEF 40 WAY, FOR 0.025" PINS(CAMAC ACB CABLE SOCKET) AMP C/W /01178 POST HEADER 50 Pin Double Row,Straight,Post Header."Breakaway Version" Samtec TSW G-D 03-4/01179 RECEPTACLE WITH STRAIN RELIEF 50 POSITION, DOUBLE ROW AMP C/W /01181 POST HEADER RIGHT ANGLE, 26 POSITION, DOUBLE ROW AMP /01182 RECEPTACLE WITH STRAIN RELIEF 26 POSITION, DOUBLE ROW AMP /01183 P.C.B. CONNECTOR 10 DUAL POSITION, SPACING, POST LENGTH 0.180" AMP /01185 POST HEADER RIGHT ANGLE, 10 POSITION, DOUBLE ROW AMP /01186 CONNECTOR HOUSING 10 POSITION, DOUBLE ROW AMP /01188 CONNECTOR HOUSING 8 POSITION, DOUBLE ROW AMP /01189 SNAP-IN CONTACT AWG AMP /01190 LEMO PLUG LEMO - STRAIGHT - MALE,SIZE 2,7 PIN,RAD HARD LEMO FFA.2S.307.CLAC /01191 LINK PLUG 2 PIN, SPACING 0.2" Unknown Part# 03-4/01192 P.C. GRD CONNECTOR JACK CLOSED ENTRY, 0.04" DIA. PINS Unknown Part# FEMALE 3-4/1430 CABLE 3-5/2029, CRIMP 1-3/1058, REPLACES 3-4/1161, GOLD CONT MATES WITH 3-4/1179 USE WITH 3-4/1178, CABLE 3-5/2031 USE WITH 3-4/1182 CABLE 3-5/2036, CRIMP 1-3/1058 USE WITH 3-4/1186 CONTACT 3-4/1189 CONTACT 3-4/1189 CRIMP 1-3/1068 USE WITH 3-5/2037 USE WITH 3-4/1192 USE WITH 3-4/ /01193 PLUG "57" SERIES, 50 CONTACT, 24 AWG Amphenol /01194 RECEPTACLE "57" SERIES, 50 CONTACT, CHASSIS MOUNT, 24 AWG Amphenol /01195 CRIMP TERMINAL RING TONGUE, BLUE INSULATED FOR AWG, #6 STUD, CRIMP 03-4/01196 CRIMP TERMINAL RING TONGUE, BLUE INSULATED FOR AWG, #4 STUD, CRIMP AMP AMP
9 Page: 9 / /01197 CRIMP TERMINAL RING TONGUE, BLUE INSULATED FOR AWG, #10 STUD, CRIMP 03-4/01199 CONNECTOR MODULE FAST BUS PCB - MODULE AUXILIARY CONNECTOR 03-4/01202 LEMO RECEPTACLE LEMO - STRAIGHT - FEMALE,SIZE 00,COAXIAL.P.C. MTG. AMP Elco LEMO EPA NTN 03-4/01203 LEMO ADAPTER SIZE 00, TYPE C, MALE LEMO AC-C /01205 LEMO ADAPTER SIZE 00, TYPE N MALE LEMO ANA NTL 03-4/01206 LEMO PLUG LEMO - STRAIGHT - MALE,SIZE 2,2 PIN.RAD HARD LEMO FFA2S302CLAC /01207 LEMO RECEPTACLE LEMO - BULKHEAD - FEMALE,SIZE 2,2 PIN.RAD HARD 03-4/01212 SOCKET FOR CONNECTOR BLOCK 3-4/1213, WIRE SIZE AWG USE CRIMP LEMO ERA.2S.302.CLL AMP /01213 SOCKET BLOCK 23 PIN, FOR NIM POWERHOUSING AMP /01214 SOCKET FOR CONNECTOR BLOCK 3-4/1213 WIRE SIZE AWG AMP /01215 SOCKET BLOCK 42 WAY, FOR NIM AMP SOCKET 3-4/1212,1214 CRIMP 1-3/1039 MATE 3-4/1090 SOCKET 3-4/1212, /01216 BNC BULKHEAD ADAPTER JACK-JACK, HERM. SEALED, 50 OHM IMPEDANCE Kings UG-492A/U 03-4/01217 BNC TEE ADAPTER F-M-F Kings KC /01219 BNC TERMINATOR 50 OHM Kings KC /01220 CONNECTOR, THERMOCOUPLE TYPE K CHROMEL/ALUMEL, CODE YELLOW, FEMALE 03-4/01221 CONNECTOR, THERMOCOUPLE QUICK DISCONNECT, CHROMEL/ALUMEL, ANS/K, CODE YELLOW, MALE Omega NMP-K-F Omega NMP-K-M 03-4/01222 TERMINAL LUG Omega TLCH /01223 TERMINAL LUG Omega TLAL-20 USE WITH 3-4/1224 USE WITH 3-4/ /01224 TERMINAL BLOCK 12 WAY Omega BS12A 03-4/01225 MOUNTING CLIP FOR NMP SERIES Omega MACL
10 Page: 10 / /01227 BNC ADAPTER JACK TO N Amphenol /01232 CERAMIC SOCKET 9 PIN C/W MOUNTING LUGS Unknown Part# 03-4/01234 CRIMP TERMINAL FASTON, RED INSULATED FOR AWG, TAB. AMP /01235 COLLETT SIZE 2 FOR 7 PIN LEMO(3-4/1190) USE WITH CABLE NOM. OD LEMO 2 S/ /01238 PULL TAB MATERIAL AMP /01239 PLUG STRAIGHT, TYPE N, FOR RG213/U Amphenol (ALT. UG-21C) 03-4/01240 RECEPTACLE PANEL MOUNT, TYPE N, 4 SCREW MOUNT, 50 OHM IMPEDANCE, PTFE 03-4/01241 ADAPTER BULKHEAD, TYPE N, JACK-JACK, INSULATION PRESSURIZED, 50 OHM 03-4/01242 SHUNT, TWO POSITION, WITH HOUSING TWO POSITION JUMPER FOR 0.025" POSTS ON 0.1" SPACING. GOLD 03-4/01244 FASTBUS MODULE AUXILIARY CONNECTOR FASTBUS MODULE AUXILARY CONNECTOR,195 CONNECTIONS 03-4/01245 RECEPTACLE, STRAIGHT, CABLE MOUNT, SIZE 0, 2 PIN LEMO STRAIGHT - FEMALE SIZE 0-2 PIN 03-4/01246 BUTT SPLICE, AWG, PIDG Butt Splice for AWG. Max insulation diameter=0.220" 03-4/01247 BUTT SPLICE, AWG, PIDG Butt Splice for AWG. Max. insulation diameter=0.0150" 03-4/01248 BUTT SPLICE, AWG, PIDG Butt Splice for AWG. Max insulation diameter=0.125" 03-4/01249 FASTON RECEPTACLE, PDIG, RED INSULATED Faston Red Insulated for AWG 03-4/01250 FASTON RECEPTACLE, PDIG, BLUE INSULATED FASTON BLUE INSULATED FOR16-14 AWG.187" TAP 03-4/01251 PCB TERMINAL BLOCK 5.08mm PCB Mount Screw Terminal Block 3 Terminals Amphenol (ALT. UG-58A) Amphenol (ALT. UG-30) AMP AMP LEMO PCA.0S.302.CLLC37 AMP AMP AMP AMP AMP (obsolete) Phoenix SMKDSP 1.5/ USE WITH 3-4/1313 CRIMP 1-3/1078 SOLD BY THE FOOT AVAILABLE IN 10' LENGTHS CRIMP TOOL 1-3/1078
11 Page: 11 / /01255 STANDARD SEX SQUARE FLANGE FLANGE RECEPTACLE CPC-7 PIN CONNECTOR AMP AMP (TYCO) /01256 STANDARD SEX PLUG FOR AMP CPC-7 PIN CONNECTOR AMP AMP (TYCO) /01257 PLUG FOR CPC4 AMP ASSEMBLY TE Conn /01258 SQUARE FLANGE CPC4 AMP CONNECTOR TE Conn USE AMP PIN 3-4/1261 USE AMP SOCKET 3-4/1264 SEE 3-4/1255 USE SOCKET 3-4/01264 CLAMP USE AMP PIN 3-4/ /01259 CLAMP FOR CPC4 AMP CONNECTOR TE Conn /01260 SQUARE FLANGE CPC-9 AMP CONNECTOR AMP AMP (TYCO) /01261 AMP PIN CONTACT,.062 DIA. TYPE III FOR USE WITH 20 TO 24 AWG WIRE CPC TYPE PIN AMP AMP (TYCO) /01262 PLUG FOR CPC-9 AMP ASSEMBLY AMP AMP (TYCO) /01263 CLAMP FOR CPC-9 AMP CONNECTOR ASSEMBLY AMP AMP (TYCO) /01264 AMP SOCKET ASSEMBLY.062 DIM TYPEII AMP /01265 AMP SOCKETS, BLUE DOT, 16 AWG CPC AMP (TYCO AMP) USE AMP PIN 3-4/1261 USE AMP SOCKET 3-4/1264 CLAMP 3-4/1263 (USE EXTRACTION TOOL 1-3/1040) FOR USE WITH 20 TO 24 AWG WIRE CPC TYPE PIN ( TYCO ) USE CRIMP TOOL 1-3/ /01266 AMP PINS, BLUE DOT 16 AWG PHASE CPC AMP (TYCO AMP) 03-4/01301 NIM-SHV JACK BULKHEAD Kings /01302 NIM-SHV PLUG STRAIGHT Kings /01303 NIM-SHV RECEPTACLE BULKHEAD FRONT MOUNTING Kings FOR USE WITH RG59B/U, CRIMP 1-3/1046, DIE 1-3/1045 FOR RG/U TYPES 59, 59A, 59B, 62, 62A, 62B, 62C CRIMP 03-4/01304 NIM-SHV RECEPTACLE BULKHEAD, REAR MOUNTING Kings /01305 NIM-SHV RECEPTACLE PANEL MOUNTING Kings /01307 NIM-SHV ADAPTER BULKHEAD FEEDTHROUGH, M-M Kings /01309 MHV COAXICON CONNECTOR Kings KV (second choice) USE WITH RG59 IN RADIATION ENVIRONMENT NOTE: LIMITED RADIATI
12 Page: 12 / /01310 UHF PLUG PHENOLIC INSULATION WITH CRIMP CONTACT Kings KU USE WITH RG/U 59,59A,59B 03-4/01311 UHF RECEPTACLE BULKHEAD, ZO - 75 OHM Kings KU /01312 UHF ADAPTER WITHIN SERIES, FEMALE-FEMALE, POLYSTYRENE INSULATION Kings KU /01314 LEMO COLLET FOR SIZE 2 BARREL FOR 6.7mm OD CABLE LEMO FFA.2S.767.CN 03-4/01315 BNC BULKHEAD JACK REAR MOUNTING Kings KC FOR RG58, CRIMP 1-3/1046 DIE 1-3/ /01316 BNC ADAPTER PANEL, JACK - JACK Amphenol /01317 BNC RECEPTACLE PANEL, MOUNTING HOLES Kings KC-79-73(obsolete) 03-4/01318 BNC RECEPTACLE PRESSURIZED BULKHEAD Kings KC FOR EXTRA NUT USE 1-1/ /01319 BNC RECEPTACLE, BULKHEAD Amphenol /01322 BNC RECEPTACLE PANEL, REOXLITE INSULATION FOR RADIATION ENVIRONMENTS Amphenol /01324 BNC SHORTING CAP WITH CHAIN MALE, WEATHER PROOF Amphenol /01325 BNC MALE SHORTING CAP MALE, SHORTING MALE CONTACT Amphenol /01326 BNC PLUG CRIMP TYPE Amphenol /01328 BNC PLUG CRIMP TYPE Kings KC /01331 BNC PLUG Kings KC /01332 BNC PLUG Kings KC /01333 BNC PLUG STRAIGHT Kings /01334 SHV PLUG FOR USE WITH RG58C/U AT 5KV X mas 3.5KV AC RMS Kings /01335 SHV 10KV RECEPTACLE 10KV Kings /01336 SHV 10KV CABLE CONNECTOR 10KV Kings /01337 BNC ADAPTER MALE-FEMALE ANGLE Kings KC USE WITH RG55, 55B, 142B, CRIMP 1-3/1046, DIE USE RG 223 CRIMP 1-3/1046, DIE 1-3/1048 USE WITH FM 8 CRIMP 1-3/1046, DIE 1-3/1049 USE WITH RG/U 59,59A,59B,62,62A,62B. REPLACES 3-4/1330, CRIM USE WITH RG174/U, RG188/U. USE CRIMP 1-3/1046 FOR KC FOR USE WITH 3-4/1336 FOR USE WITH RG58C/U, USE WITH 3-4/1335, CRIMP 1-3/1046 DIE
13 Page: 13 / /01338 ADAPTER BNC JACK - LEMO, BULKHEAD MOUNT LEMO ABD NTM 03-4/01339 BNC PLUG STRAIGHT Kings /01341 RECEPTACLE BOX MOUNTING, 19 PIN Amphenol A-22-14P USE WITH RG58-RG58/U & RG58C/U CRIP 1-3/1046, DIE 1-3/1048 S 03-4/01342 CONNECTOR STRAIGHT PLUG, 19 PIN Amphenol A-22-14S 03-4/01350 TWINAX MALE PLUG Trompeter TROMPETER ELECTRONICS INC. #PL /01400 RECEPTACLE RECESSED MALE, CABINET MOUNTING, U GROUND, 115V, 15 AMP 03-4/01405 MALE CORD END VINYL, U GROUND, 115 V, 15 AMP, CORD , 3/16 CABTIRE Hubbell HBL5240 Hubbell 5965 VY (PREFERED PART) 03-4/01408 PLUG 2 CONTACT, ANGLE 125 VAC. Leviton /01410 FEMALE CORD END YELLOW NYLON GRIP, U GROUND, 125 V, 15 AMP, CORD , 3/16 CABTIRE Hubbell 5969-VY 03-4/01414 RECEPTACLE SINGLE TWISTLOCK, GROUNDING, 125/250V, 20AMP Hubbell 2410 FOR USE WITH BL1242 (3-5/2022) CABLE CONNECTS TO VME QSX & V USE WITH FAN ASSY (MALE 3-4/1405) 03-4/01415 PLUG TWISTLOCK, GROUNDING, 125/250V, 20AMP Hubbell /01417 RECEPTACLE HUBBELLOCK, 4 WIRE, GROUNDING, 600V 30A AC, 250V 30A DC Hubbell /01418 PLUG HUBBELLOCK, GROUNDING, 600V 30A AC, 250V 30A DC Hubbell B 03-4/01419 RECEPTACLE STRAIGHT BLADE, GROUNDING, DUPLEX, 125V, 15A Hubbell /01420 RECEPTACLE TWISTLOCK, GROUNDING, 250V 20A 3 PHASE Hubbell /01421 PLUGS TWISTLOCK, GROUNDING, 250V 20A 3 PHASE Hubbell 2421 USE WITH 3-4/1421 MALE USE WITH RECEPTACLE 03-4/01422 RECEPTACLE TWISTLOCK, GROUNDING, 125V 20A, 2 POLE, 3 WIRE Hubbell /01423 PLUG TWISTLOCK, GROUNDING, 125V 20A, 2 POLE, 3 WIRE Hubbell /01424 RECEPTACLE TWISTLOCK, GROUNDING, 125V 30A Hubbell /01425 PLUG TWISTLOCK, GROUNDING, 125V, 30A Hubbell /01426 CONNECTOR BODY FEMALE, TWISTLOCK, 250V 20A, 3 PHASE Hubbell 2423 USE WITH 3-4/1421 MALE CORD
14 Page: 14 / /01429 CONNECTOR BODY F , U GROUND 125V, 15A Hubbell 5269C 03-4/01430 FEMALE SCREW LOCK AMP /01431 ADAPTER BNC FEMALE TO DUAL BANANA PLUG, BLACK Abbatron 1686 USE WITH 3/16 CABTIRE TO FIT DE, DA, DC, DD PIN AND SOCKET BLOCKS, MALE 3-4/ /01432 ADAPTER BNC MALE TO DUAL BANANA PLUG, BLACK Abbatron /01433 CONNECTOR, COMPRESSION SHORT BARREL, ONE HOLE FOR ALL COPPER WIRE, SIZE 4/0AWG STRANDED Burndy YAL28T /01500 SOCKET SUBMINIATURE COAXICON AMP /01505 PIN SUBMINIATURE COAXICON, LONG AMP /01506 PIN SUBMINIATURE COAXICON, SHORT AMP /01511 FERRULE AMP USE WITH RG174, 188, 316 USE WITH RG174, 188, 316 USE WITH 3-4/1519, RG196 CABLE USE WITH 3-4/ /01513 FERRULE ZINC PLATED INSULATED AMP /01514 FERRULE AMP /01519 BLOCK COAXICON PIN, SHALLOW, 34 POSITION AMP /01520 BLOCK COAXICON SOCKET, 34 POSITION AMP /01524 BLOCK COAXICON PIN, LONG, 34 POSITION AMP FOR USE WITH COAXICON PINS PIN 3-4/1506 SOCKET 3-4/1500 PIN 3-4/ /01530 CLAMP LONG, STRAIN RELIEF, FOR COAXICON CONNECTOR AMP /01531 LOCKING SPRING FOR COAXICON SPRING AMP /01532 LOCKING CATCH FOR COAXICON CONNECTOR AMP /01533 SOCKET CORNER GUIDE, FOR COAXICON CONNECTOR AMP /01540 HOOD 34 POSITION, FOR COAXICON CONNECTOR AMP /01541 BLOCK SOCKET, PHENOLIC, 14 POSITION, SHALLOW, CABLE SYSTEM HVTT-14 AMP /01542 BLOCK PIN, PHENOLIC, 14 POSITION, SHALLOW AMP MATE 3-4/1542, SOCKET 3-4/1544 MATE WITH 3-4/1541, PIN 3-4/ /01545 JACKSCREW FEMALE, FIXED SHORT, USE WITH HVTT SYSTEM AMP /01546 JACKSCREW MALE, FIXED SHORT, USE WITH HVTT SYSTEM AMP
15 Page: 15 / /01547 CLAMP STRAIN RELIEF, LONG, USE WITH HVTT SYSTEM AMP /01548 POST HEADER 40 Pin Double Row,Straight,Post Header."Breakaway Version" AMP /01550 POST HEADER 6 POSITION, DOUBLE ROW, RIGHT ANGLE AMP /01551 POST HEADER 4 POSITION, DOUBLE ROW, RIGHT ANGLE AMP /01552 POST HEADER 34 POSITION, DOUBLE ROW, RIGHT ANGLE AMP /01553 POST HEADER 50 POSITION,DOUBLE ROW,RIGHT ANGLE POST,0.100" CENTRE,PIN, PROTECTION 3 SIDES 03-4/01554 HOUSING CONNECTOR, 40 POSITION, DOUBLE ROW, W/O MOUNTING EARS 03-4/01555 HOUSING CONNECTOR, 34 POSITION, DOUBLE ROW, W/O MOUNTING EARS AMP (obsolete) AMP AMP /01556 HOUSING CONNECTOR, 4 POSITION, DOUBLE ROW, BOTH ENDS CLOSED AMP /01557 HOUSING CONNECTOR, 6 POSITION, DOUBLE ROW, BOTH ENDS CLOSED AMP MATES WITH 3-4/1554 USE WITH 3-4/1557 USE WITH 3-4/1556 USE WITH 3-4/1555 CONTACT 3-4/1189 CONTACT 3-4/1189 CONTACT 3-4/1168 CONTACT 3-4/ /01558 HOUSING CONNECTOR, 2 POSITION, DOUBLE ROW AMP /01561 PLUG CONNECTOR HOUSING, 25 POSITION AMP /01562 RECEPTACLE CONNECTOR HOUSING, 25 POSITION AMP /01563 PIN (AMP) AMP /01564 SOCKET AMP AMP /01565 PLUG AMP 9 POSITION CONNECTOR HOUSING AMP /01566 SOCKET AMP 9 POSITION CONNECTOR HOUSING AMP (OBSOLETE) 03-4/01567 PLUG AMP 15 POSITION CONNECTOR HOUSING AMP /01568 SOCKET AMP 15 POSITION CONNECTOR HOUSING AMP PIN 3-4/1563, MATE WITH 3-4/1562 SOCKET 3-4/1564, MATES WITH 3-4/1561 CRIMP 1-3/1001, DIE 1-3/1077 EXTRACTION/INSERTION TOOL 3-4/1 CRIMP 1-3/1001, DIE 1-3/1077 EXTRACTION/INSERTION TOOL 1-3/1 WILL MATE WITH 16 MIL SPEC. C24308, HOOD 3-4/1579 WILL MATE WITH 16 MIL SPEC. C24308, SOCKETS 3-4/1564 RoHS CO WILL MATE WITH 16 MIL SPEC. C24308, PINS 3-4/1563 WILL MATE WITH 16 MIL SPEC. C24308, SOCKETS 3-4/1564
16 Page: 16 / /01569 PLUG AMP 37 POSITION CONNECTOR HOUSING AMP /01570 SOCKET AMP 37 POSITION CONNECTOR HOUSING AMP /01571 PLUG AMP 50 POSITION CONNECTOR HOUSING AMP /01572 SOCKET AMP 50 POSITION CONNECTOR HOUSING AMP /01573 NYLON HOOD NYLON HOOD FOR 15 WAY 'D' OR 31 WAY 'DD' CONNECTORS 03-4/01574 NYLON HOOD NYLON HOOD FOR 25 WAY 'D' AND 52 WAY 'DD' CONNECTORS AMP Ithemba DB /01575 CHAMP 50 WAY CHAMP SERIES IDC AMP / deg. SNAP-ON STRAIN RELIEF COVER STRAIGHT HOOD AMP / deg. SNAP-ON STRAIN RELIEF COVER RIGHT ANGLE HOOD AMP /01578 J-LATCH SECURING LATCH AMP /01579 CABLE CLAMP ASSY, (HOOD) HOOD FOR 9 WAY 'D' CONNECTORS AMP /01580 NYLON HOOD NYLON HOOD FOR 50 WAY 'D' CONNECTORS AMP /01581 NYLON HOOD NYLON HOOD FOR 37 WAY 'D' CONNECTORS AMP /01582 CHAMP 50 WAY EDGE MOUNT RECEPTACLE CHAMP SERIES 50 WAY EDGE MOUNT RECEPTACLE AMP /01583 CHAMP EDGE MOUNT PC BOARDS CONNECTOR AMP /01584 RECEPTACLE WITH STRAIN RELIEF 34 Position Double Row AMP WILL MATE WITH 16 MIL SPEC. C24308, PINS 3-4/1563 WILL MATE WITH 16 MIL SPEC. C24308, SOCKETS 3-4/1564 WILL MATE WITH 16 MIL SPEC. C24308, PINS 3-4/1563 WILL MATE WITH 16 MIL SPEC. C24308, SOCKETS 3-4/1564 CAN BE PUT ON AFTER ASSEMBLY USE ONLY WHEN SLIDE LOCKS REQ'D FOR USE WITH JOERGER D/A MODULES, USES HOOD 3-4/1576, MATES FOR 3-4/1575 CAN BE PUT ON AFTER CABLE, SCREW LOCK AND J-LAT FOR 3-4/1575, CAN BE PUT ON AFTER CABLE, LOCK WITH 1 SCREW A FOR 3-4/1575 CAN BE INSTALLED AFTER CABLE ASSY CAN BE INSTALLED AFTER ASSY. USE ON NEW UNITS WHEN SLIDE LOC CAN BE INSTALLED AFTER CABLE. USE ASSY WHEN SLIDE LOCKS NOT FOR USE IN 16 CHAN MULTIPLEXER KIT 3-4/1583 USE WITH 3-4/1582 use Cable 3-5/ /01586 CABLE CLAMP KIT AMP /01588 CONNECTOR, DB9 PC BOARD RIGHT ANGLE, 0.318" AMP FOOTPRINT Right Angle 9 way DB - SUBMIN FEMALE PCB MOUNTING
17 Page: 17 / /01590 CONNECTOR, DB25 PC BOARD RIGHT ANGLE, 0.318" AMP (DISCONTIUED) 03-4/01591 METAL HOOD, RIGHT ANGLE CONECTOR AMP /01592 INNER CRIMP FERRULE INNER CRIMP FERRULE AMP /01593 OUTER CRIMP FERRULE AMP FOOTPRINT Right Angle 25 way DB - SUBMIN FEAIL PCB MOUNT TYP 3-4/1592/93 CRIMP FERRULES 3-5/2057, 2058 ETHERNET TRANSCEIV FOR 3-4/1591 USE WITH 3-5/2057;2058 EITHERNET CABLE For 3-4/1591, Use With 3-5/2057; / POSITION CONNECTOR, MOD IV AMP
SERIES MHV (H4) HIGH VOLTAGE CONNECTORS
SERIES MHV (H4) HIGH VOLTAGE CONNECTORS DESCRIPTION CONTENTS PAGE HUBER+SUHNER MHV connectors are coaxial miniature high voltage (MHV = Miniature High Voltage) connectors with 5 kv rms test voltage (mated
More informationD-subminiature Backshells - Two-Piece D*H Series
Backshells - Two-Piece D*H Series Standard two-piece construction available in plastic, metallized plastic, or diecast zinc versions with 180 straight cable entry. Fits standard metal shell D-subminiature
More informationAMPLIMITE.050 Series Cable Assemblies, Series III
Cable Assemblies, Series III To meet Standard Applications the following 106 ohm, black jacketed cable assemblies are available. For AMPLIMITE Series cable assemblies that meet other impedance requirements
More informationMMC RTX series EN3716
MMC RTX series EN3716 7 CONTENTS Page Introduction... 7-4 Application 7-4 Features... 7-4 Product overview... 7-5 Electrical characteristics... 7-6 Mechanical & environmental characteristics... 7-6 Products
More informationAMPLIMITE* HDP- 20 and Economy
AMPLIMITE* HDP- 20 and Economy Application Specification Crimp Snap Subminiature D 114-40030 Commercial s 05 MAY 11 Rev D NOTE i All numerical values are in metric units [with U.S. customary units in brackets].
More informationBodies Brass Nickel or Gold Gold Female: Beryllium copper Insulator Teflon N/A Crimp ferrule Annealed copper Nickel or Gold
Materials Connector part Material Finish Bodies Brass Nickel or Gold Center Contact Male: Brass Gold Female: Beryllium copper Insulator Teflon N/A Crimp ferrule Annealed copper Nickel or Gold Electrical
More informationMCX Amphenol. Description MCX. 50 Ohm Coaxial Connectors Specifications 18 Straight & Right Angle Crimp 19 Straight Solder & PCB 20-21
Description connectors conform to the European CECC 22220 Spec and was introduced in the 1980 s. While the uses identical inner contact and insulator dimensions as the SMB, the outer diameter of the plug
More informationonlinecomponents.com
Description Amphenol connectors are used in applications where maximum RF shielding and minimum noise radiation are required. Features/Benefits Available in 7/8-20 and 11/16-24 threading, C, BNC and TNC
More informationTriax Amphenol. Description Amphenol Triax connectors are used in applications where maximum RF shielding and minimum noise radiation are required.
Description Amphenol connectors are used in applications where maximum RF shielding and minimum noise radiation are required. Features/Benefits Available in 7/8-20 and 11/16-24 threading, C, BNC and TNC
More informationSTRAIGHT DIP SOLDER PLUG
STRAIGHT DIP SOLDER PLUG 8051 SERIES SERIES. For PCB Solder. Centronic Connector # Available in 14, 24, 36 and 50 circuits # Shell: Steel, tin plated as standard # Insulator Material: Glass filled polyester
More informationSMB Amphenol. 50 ohm Coaxial Connectors Specifications 36 Plugs 37 Jacks 38 Bulkhead Receptacles PCB Receptacles 41-43
Description The name derives from SubMiniature B (the second subminiature design). The was developed in the 1960 s. is a smaller version of the SMA with snap-on coupling. Amphenol s connectors conform
More informationCONNECTORS - SINGLE POLE
CONNECTORS - SINGLE POLE CROCODILE CLIPS DAVID USE PHOTO SD0010 TERMINAL POSTS SOLDER TAGS CRIMP CONNECTORS CRIMPING TOOLS DAVID USE PHOTO SD0010 BOOTLACE FERRULES 2127 CABLE SPLICES 2128 CRIMP CONNECTORS
More informationInterconnection Solution Guide. Durability Gold Flash 75 cycles 15µ Gold 125 cycles 30µ Gold 250 cycles Full gold flash 75 cycles
D Amphenol G17 DSub Connector Right Angle PCB Mount Through-hole DSub connectors male and female. Board-locks P/B DSub R/A PCB CONNECTOR Through Hole 2.54mm pitch PC board layout Page D-3 DSub Accessories
More informationEN3716 SAE AS81659 ARINC
6 DSX RTX Series series SAE AS81659 EN3716 ARINC 404 Page Introduction... 6-4 Applications... 6-5 DSX SAE AS81659 Product overview... 6-6 Technical characteristics :... 6-7 & 6-8 Electrical... 6-7 Mechanical
More information... A Vital Part of Connection World CMPTER. Cable Connectors PCB Connectors Assembly Instructions Mounting Holes MCX CONNECTORS
... A Vital Part of Connection World Cable Connectors PCB Connectors s Mounting Holes MCX CONNECTORS COPYRIGHT ELECTRONICS 0 MCX Series Coaxial Connectors DESCRIPTION MCX connector are developed in Europe
More informationSMB LOCK Introduction Characteristics Straight plugs Right angle plugs SMB limited detent (SMB-A) Receptacles...
CONTENTS PAGE SMB Introduction... 4 General... 5 Finder guide... 6 Interface... 7 Characteristics...8-9 Straight plugs...0- Right angle plugs...- Jacks... 3 Bulkhead jacks...4-5 Receptacles...6-7 PCB receptacles...
More informationD-Subminiature EMI/RFI Shielding Interconnection Systems
Amphenol Amphenol PCD Shenzhen D-Subminiature EMI/RFI Shielding Interconnection Systems www.amphenolpcd.com.cn Product profile RR-HR D-Sub connectors - stamped and formed contacts REAR RELEASE CRIMP CONNECTORS
More informationCrimpmate Range pitch 5.00
Contents pitch. pitch. pitch. Male and female connectors with solder connection. Male and female connectors with crimp connection. Crimp contacts..1 pitch. RSV 1. S Derating curve RSV1. S SN Rectangular
More informationSMB Connectors Specifications Flexible Cable Bulkhead PCB Mount... 66
Section Index Connectors Specifications... 62 Flexible Cable... 64 Bulkhead... 65 PCB Mount... 66 Other Information Assembly Instructions... 176 Cable Assembly... 166 Cable Information... 168 Numerical
More informationFine Pitch SMT Stacking Connectors (Parallel Board-to-Board) Fine Pitch SMT Stacking Connectors (Parallel Board-to-Board) Stacking Height mm inch
Fine Pitch SMT Stacking Stacking Height Guide for Parallel Board-to-Board Applications Fine Pitch SMT Stacking Stacking Height Guide for Parallel Board-to-Board Applications (Continued) Stacking Height
More informationAMG DISTRIBUTORS. AMG Distributors Pty Ltd
AMG DISTRIBUTORS AMG Distributors Pty Ltd 1 AMG DISTRIBUTORS. Product Index Automotive: AMP SUPERSEAL 1.5 HOUSING 61-63 AMP SUPERSEAL 1.5 KITS 63 AMP SEAL 16 CONNECTORS 61 ANDERSON PLUGS 56 BATTERY CABLE
More informationSERIES BMA, SUBMINIATURE BLIND MATE CONNECTORS
SERIES, SUBMINIATURE BLIND MATE CONNECTORS DESCRIPTION CONTENTS PAGE HUBER+SUHNER blind mate connectors open up special dimensions in microwave applications up to 18 GHz. HUBER+SUHNER offers a range of
More informationSMA CONTENTS PAGE 9-3
CONTENTS PAGE SMA Introduction... 4 General... 5 Finder guide...6-7 Interface... 8 Characteristics...9-10 Straight plugs...11-12 Right angle plugs...13-14 Straight jacks... 14 Straight flange jacks...14-15
More informationAmphenol RF Interconnects
1.6/5.6 Miniature 75 ohm coaxial connectors continued Right Angle Bulkhead Jack for PCB Plug to Plug Adapter Plug to Plug U Link Adapter 1566252M1N3GT3G75 1562071A1N3GT3G75 1562076A1N3GT3G75 1566252M01RFX
More informationBroadcast. Use Solid Reliability. Return Loss Graph Lo-Pro. Environmental. Electrical. Contact. millohm
Tri-Loc Series Standardd & Lo-Pro Connectors Jacks and Plug ugs Lo-Pro Tri-Loc Connectors Full Crimp Procedure Broadcast Ideally Suited for Outdoor Use Solid Reliability Point-To-Point Solutions Specifications
More informationG R E E N L I T E. c a b l e a c c e s s o r y c o r p o r a t i o n
G R E E N L I T E c a b l e a c c e s s o r y c o r p o r a t i o n G R E E N L I T E c a b l e a c c e s s o r y c o r p o r a t i o n GT Nylon Cable Ties 4 GT Nylon Cable Ties - Color 5 GS Screw-Mount
More informationCONEC provides reliable and effective solutions to OEM, EMS and cable houses.
CONEC CANADA USA CONEC designs and manufactures products in modern facilities. The products are made in accordance to the highest quality standards and industry specifications. CONEC provides reliable
More informationAMPLIMITE Cable Connector Accessories
MPLIMITE Cable Connector ccessories Quick Reference Guide We offer one of the broadest, most versatile portfolios of Dsubminiature connectors in the market with unrivaled engineering support to address
More informationAmphenol. eries SJT. Series SJT. VG 96912, Series 1 PAN JN 1003
Amphenol eries SJT Series SJT VG 96912, Series 1 PAN 6433-2 JN 1003 Ordering information Ordering example: SJT G 06 RT 14-35 P A 014 Series (p. 9, 15, 18) SJT Scoop proof (100% scoop-proof) Junior (Miniature
More informationMCX Connectors Specifications Flexible Cable Semi-Rigid Cable Panel Mount PCB Mount... 22
Section Index Connectors Specifications... 17 Flexible Cable... 19 Semi-Rigid Cable... 20 Panel Mount... 21 PCB Mount... 22 Other Information Assembly Instructions... 176 Cable Assembly... 166 Cable Information...
More information1000 Series Miniature Slide Switches
Miniature Switches Features/Benefits Variety of actuators and terminations Panel mount tabs available Epoxy terminal seal compatible with bottom-wash cleaning RoHS compliant Typical Applications Test &
More informationOur Most Important Connection is with You. SECTION 17. Tooling & Accessories R280 / R282
SECTION 17 Tooling & Accessories R280 / R282 Contents Joule effect soldering devices... 17-4 Stripping tools...17-4 and 17-7 Point gauges... 17-4 Soldering... 17-5 Installation tools...17-5 to 17-6 Cassettes...
More informationDirectory chapter 01
Directory chapter 01 Miniature D connectors, 1.27 mm pitch Page I/O connectors................................................. 01.02 Pin and socket Technical characteristics........................................
More informationDistributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. Connectors Features Snap-on interface facilitates assembly Conforms to CECC
More informationVaricon. Series " x.130" x.150" Grid Pattern FEATURES TECHNICAL SPECIFICATIONS
Series 8016.075" x.130" x.150" Grid Pattern FEATURES Available in five sizes: 20, 38, 56, 90 and 120 contacts Insertable / removable Varilok contacts Crimp, solder, solderless wrap, and taper tab terminations
More informationC&K 1000 Series Miniature Slide Switches
Miniature Switches Features/Benefits Variety of actuators and terminations Panel mount tabs available Epoxy terminal seal compatible with bottom-wash cleaning RoHS compliant Typical Applications Test &
More informationVaricon. Series " x.130" x.150" Grid Pattern FEATURES TECHNICAL SPECIFICATIONS
Series 8016.075" x.130" x.150" Grid Pattern FEATURES Available in five sizes: 20, 38, 56, 90 and 120 contacts Insertable / removable Varilok contacts Crimp, solder, solderless wrap, and taper tab terminations
More informationHeavy Duty Copper Battery Terminals
Heavy Duty Copper Battery Terminals Constructed of 131 contact copper to provide high conductivity. Raised characters to ensure legibility of important information regarding cable size, post type, and
More informationDirectory chapter 08. InduCom Robust and EMI protected D-Sub interfaces
Directory chapter 08 Robust and EMI protected D-Sub interfaces New Page General information.............................................. 08.02 Mounting details................................................
More informationMicroMate (MMCX) Amphenol Specifications
Specifications ELECTRICAL CECC22000 Test Requirement Impedance 50 Ohm Frequency Range DC thru 6 GHz VSWR 4.4.1 SMT and Edgecard (Mated Pair) DC - 4 GHz 1.15 Max 4-6 GHz 1.40 Max Cabled Straight, Semi-Rigid
More informationFAKRA-Compliant SMB Gen-4 Connector System
FAKRA-Compliant SMB Gen-4 Connector System Application Specification 114-13157 25 MAR 13 NOTE NOTE i All numerical values are in metric units [with U.S. customary units in brackets]. Dimensions are in
More informationRF Coaxial Connectors SMZ (Type 43)
SMZ (Type 43) Introduction The ITT Cannon range of SMZ connectors are extensively used in 75 communication systems and have become the recognised standard in telecommunications in many parts of the world.
More informationLITHIUM-ION BATTERY POWERED CRIMP TOOLS
LITHIUM-ION BATTERY POWERED CRIMP TOOLS COMPLETELY PORTABLE POWER CRIMPING INTRODUCTION TO SOLUTIONS TE Connectivity. A Leader in Crimp Quality. Anyone can make a tool to crimp terminals onto a wire. But
More informationcircuit protection & wiring accessories
circuit protection & wiring accessories J J1 circuit breakers Circuit breakers and fuses are a cost-effective solution to protecting wiring, equipment and subsystems. While fuses are a one-time, disposable
More informationSCE. Snatch Connector Electrical Series
SCE Snatch Connector Electrical Series SCE is a miniature product with a silent push to mate and pull to release design across two styles of cable receptacles. All inserts and contacts are moulded in place,
More informationTECHNICAL INFORMATION
S ECTION Solderless Terminal Construction/Technical Information...-2 Numbering System...-4 Decimal Equivalent Chart...-5 Wire Gauge Conversion...-5 Stud Size Chart...-6 Ring Terminals...-7, 10, 12 Spade
More informationFax: PO Box 100, 2222 Moore Rd. Jonesville, MI
1-800-447-3150 Fax: 1-517-849-9516 PO Box 100, 2222 Moore Rd. Jonesville, MI 49250 www.hillsdaleterminal.com INDEX Adapters...12 Battery & Welding Cable...17 Battery Terminals...16 Bullet Connectors...10
More informationFAKRA-Comliant SMB 50-Ohm Inline Connectors 27 JUN 11 Rev E
Application Specification 114-13069 FAKRA-Comliant SMB 50-Ohm Inline Connectors 27 JUN 11 NOTE i All numerical values are in metric units [with U.S. customary units in brackets]. Dimensions are in millimeters
More informationBNC and MHV SHV-5 and SHV-10 SHV-20 and SHV-B
Coaxial is the description for electrical feedthroughs with parallel and concentric conductor paths, and with the inner most conductor path electrically isolated from the vacuum flange. Grounded Shield
More informationElectrical. Hardware & Fastening Solutions. Battery Supplies. J-Case Fuses - Regular... Page 162
Flag Style... Page 156 Electrical Batteries... Page 153 Mounting Pads (Adhesive Backed)... Page 161 Battery Supplies J-Case Fuses - Regular... Page 162 Booster Cable Supplies... Page 153 J-Case Fuses -
More informationM Series Pin and Socket Connectors Catalog Revised 3-01
M Series Connectors Product Facts Most connectors intermateable with connectors made to MIL-C-28748 requirements Wide range of connector styles and sizes: standard c o n n e c t o r s (unloaded), posted
More information06. har-mik INTERFACE CONNECTORS
. INTERFACE CONNECTORS Miniature D connectors are a must in various cableto-board applications where space saving and high data transfer rates are required. For the purposes of miniaturization and speed,
More informationRP SMA Male Connector Crimp/Solder Attachment for RG174, RG316, RG188, PE-B100, PE-C100, inch, LMR-100
RP SMA Male Connector Crimp/Solder Attachment for RG174, RG316, RG188, PE-B100, PE-C100, 0100 inch, LMR-100 RF Connectors Technical Data Sheet PE4771 Configuration SMA Male Reverse Polarity Connector MIL-STD-348
More informationCATALOG OF REPLACEMENT PARTS
CATALOG OF REPLACEMENT PARTS OV310G MINI RACK OVEN ML-132515 OV310G A product of BAXTER MFG. CO., INC. 19220 STATE ROUTE 162 EAST, ORTING, WA 98360 FORM 43242 Rev. D (January 2018) F-43242 Rev. D (January
More informationAmphenol 97 Series MIL-DTL-5015
Amphenol 97 Series MIL-DTL-5015 MATES WITH ALL THREADED MIL-DTL-5015 CONNECTORS The 97 series is a durable, cost-effective MIL-DTL-5015 available in a variety of shell styles, sizes, contacts, and layouts.
More informationPush-Pull connectors
Push-Pull connectors Introduction This catalog presents the push-pull connectors ranges for industrial applications. These products are particularly suitable for high reliability and high quality applications
More informationPHONO JACKS * Please visit the product pages on our website for the most up-to-date product information 3501F 3501FP 3501FR 3514PC 3515PC
PHONO JACKS BULKHEAD PHONO JACKS 123 3501F 3501FP 3501FR 3514PC 3515PC 3517PC BPJR01 BPJF01 BPJJ01 3505F 3503 FEATURES AND BENEFITS Front or rear mount configurations Durable plated machined brass construction
More informationMK IV OVERHEAD DOOR REPLACEMENT PARTS BOOK
MK IV OVERHEAD DOOR REPLACEMENT PARTS BOOK JAMISON DOOR COMPANY P.O. BOX 70 HAGERSTOWN, MARYLAND 21740 1-800-532-3667 301-733-3100 INTERNET: http://www.jamisondoor.com E-MAIL: contact@jamisondoor.com ECN
More informationModel C4 - Diagram #1
C-4 Model C4 - Diagram # 29 2 40 ASSEMBLY 43 38 2 4 52 4 44 4 28 3 ASSEMBLY 32 34 ASSEMBLY 42 7 7 5 50 49 33 57 29 37 3 20 2 2 48 ASSEMBLY 5 3 9 2 3 0 4 3 2 58 22 23 ASSEMBLY ASSEMBLY 54 53 ASSEMBLY 5
More informationHYDROCON Standard Sealed Connectors
HYDROCON Standard Sealed Connectors Ratings: 2 & 3 Pole 10A 250V AC/DC 4 Pole 6A 250V AC/DC 6 & 7 Pole 3A 250V AC/DC 9 Pole 5A 150V AC/DC 25 Pole 1A 50V AC/DC Contact Resistance:
More informationPARTS LIST WRANGLER 2625 DB
PARTS LIST WRANGLER 2625 DB 1 NOTES 2 BRUSH GEAR MOTOR ITEM PART NO. PART DESCRIPTION QTY. 2393501 COMPLETE MOTOR ASSEMBLY 1 101 3391221 NEGATIVE LEAD 1 102 3391201 1/4-20 X 7 3/4THRU BOLT 2 103 10-24
More informationCastellated/Hex Nut. Insert Retaining Ring. Contact Insert
Castellated/Hex Nut Seals Snap-on Connection for Flexible Straps & Covers Insert Retaining Ring Contact Insert Sealing Cap Clip Gland Cage Insert Retaining Ring Contact Insert Locking Ring Flex Body Moulding
More information2M Series Contacts and Tools
Crimp Type AMPS #23 #20HD #20 #16 #12 AWG Part Number Color Band 1st 2nd 3rd #22-#28 2M809-001 N/A N/A N/A #26-#30 2M809-042* Blue N/A N/A 5 Socket #22-#28 2M809-002 N/A N/A N/A Socket #26-#30 2M809-043*
More informationRP SMA Female Connector Crimp/Solder Attachment For RG178, RG196
RP SMA Female Connector Crimp/Solder Attachment For RG178, RG196 TECHNICAL DATA SHEET PE4799 RP SMA Female Connector Crimp/Solder Attachment For RG178, RG196 Configuration Connector Connector Specification
More informationAmphenol-Tuchel Electronics 44 Series
44 Series Amphenol-Tuchel Electronics 44 Series Cost-effective environmental sealing Amphenol Tuchel 44 series connectors offer cost-effective performance for applications requiring environmental sealing.
More informationContents. Connectors - Crimp Terminals. Page
Farnell Page 249 Date: 17-08-0 time:21:21 Contents Page Bootlace Ferrules 250 Insulated Crimp Terminals - Imperial 21 Insulated Crimp Terminals - Metric 253 Non Insulated Crimp Terminals 22 Non Insulated
More information8500 Series Subminiature Pushbutton Switches
Subminiature Switches Features/Benefits Pre-travel or over-travel models available Ratings up to 3 AMPS Reliable contact design RoHS compliant Typical Applications Detection Telecommunications and networking
More informationPARTS LIST WRANGLER 2625 DB
PARTS LIST WRANGLER 2625 DB 1 NOTES 2 BRUSH GEAR MOTOR ITEM PART NO. PART DESCRIPTION QTY. 2393001 COMPLETE MOTOR ASSEMBLY 1 101 3391221 NEGATIVE LEAD 1 102 3391201 1/4-20 X 7 3/4THRU BOLT 2 103 10-24
More informationSEK Solder board connectors
Solder board connectors Technical characteristics 6, 10, 14, 16, 20, 26, 30*, 34, 40, 50, 60, 64 Contact arrangement straight, angled Contact length 2.9 mm, 4.5 mm Approvals IEC 603-13 DIN EN 60 603-13
More informationHH Smith. Quality Is In the Details. Full Line Catalog 106
HH Smith Quality Is In the Details Full Line Catalog 106 HH Smith Through strategic acquisitions at the beginning of the millennium, Abbatron s leadership set the course to enter the electronics industry
More informationHARTING. Interface Connectors. People Power Partnership
11 4 HARTING Interface Connectors People Power Partnership People Power Partnership Quality Connections Worldwide HARTING was founded in 1945 by the family that still owns the company. Today, HARTING employs
More informationMG RANGE CONTENTS. General Specification Shell Styles... 4, 5, 6. Ordering Information Connectors... 7
CONTENTS General Specification........ 3 Shell Styles..... 4, 5, 6 Ordering Information Connectors... 7 Ordering Information Protective Caps... 8 Ordering Information Square Gaskets... 8 Insert Configurations.
More informationSpecialty Electrical Supplies and Tools
Specialty Electrical Supplies and Tools Connectors Terminals Tools Battery Accessories Circuit Protection Cable Ties & Accessories San Diego, California Office Phone 619.278.1302 * Fax: 619.542.9994 Electrical
More informationQuick Index MODE ELECTRONICS LTD.
Mode Electronics Ltd. head office and warehouse is located in Burnaby, B.C., Canada. Our products are sold exclusively through Electronic Distributors across Canada and the USA. Please check our web site
More informationEPIC CIRCON M23 Series
M23 Series EPIC EPIC CIRCON M23 Series Application Advantage Rugged nickel-plated, die-cast zinc body Positive vibration protection for use with motor drives and moving assemblies Integral EMC cable gland
More informationSURE JET ENVELOPE FINISHING SYSTEM MODEL EFS
SURE JET ENVELOPE FINISHING SYSTEM MODEL EFS SURE JET VACUUM BASE SJVB SURE JET VACUUM BASE SJDB-EXT Parts Manual SJ_EFS-PARTSBOOK051507reva 1 TABLE OF CONTENTS ENVELOPE FINISHING SYSTEM- SURE JET EFS-SURE
More informationLiftgate Terminology
SL-20 Series SL-20 Series Click the appropriate link below for the major component of the liftgate for which you are trying to find the correct part. If you are unsure of the name of the part in Waltco
More informationPARTS LIST WRANGLER 26-VS
PARTS LIST WRANGLER 26-VS ELECTRICAL WIRING ITEM PART NO. DESCRIPTION QTY. 1 2694161 UPPER WIRING HARNESS 1 2 2694171 LOWER WIRING HARNESS 1 3 2490811 BRUSH MOTOR WIRE ASSEMBLY 1 4 2396141 WIRE ASSEMBLY
More informationcircuit protection & wiring accessories
circuit protection & wiring accessories CIRCUIT BREAKERS P1 P BLOCKS & BUSBARS TERMINAL BLOCKS P2 P3 CONNECTORS, TERMINALS & FUSES P4 CLAMPS, CLEATS, CLIPS & TIES P5 P1 circuit protection & wiring accessories
More informationWRANGLER 2016 WHEEL DRIVE, PAD ASSIST & ELECTRIC MODELS
WRANGLER 2016 WHEEL DRIVE, PAD ASSIST & ELECTRIC MODELS BRUSH LIFT 101 9121960 3/8 EXTERNAL STAR LOCK WASHER 1 102 9122030 3/8-16 X 3/4 BUTTON HEAD SOCKET SCREW 1 103 2694261 CABLE 1 104 2391771 90 HOSE
More information1Rack and Panel Connectors
Rack and Panel Connectors Table of Contents RINC 600 Connectors Introduction............................................................2 Ordering Information.....................................................3
More informationRA CONNECTOR IDC. 1Certified LR Features. Standards. Disconnectable Insulation displacement connectors for 1.27mm pitch ribbon cables. 2.
IDC mm pitch R CONNECTOR IDC Disconnectable Insulation displacement connectors for 1.2mm pitch ribbon cables Features Twin U-slot ID section The twin U-slot is the most important IDC element in JST s R
More informationCoaxial Snap-Lock Connectors
Coaxial Snap-Lock Connectors Application Specification 114-13010 11 APR 13 NOTE NOTE i All numerical values are in metric units [with U.S. customary units in brackets]. Dimensions are in millimeters [and
More informationLMJ RANGE CONTENTS. Description and characteristics Shell Styles Ordering Information - Connectors... 7
CONTENTS Description and characteristics..... 3-4 Shell Styles... 5-6 Ordering Information - Connectors.... 7 Ordering Information - Crimp Tooling.... 8 Ordering Information Square Gaskets..... 8 Ordering
More informationAmphenol 348 Series High Density Connectors
348 Series High Density Connectors 12-093-6 348 Series I, II Table of Contents 348 Series Page No. High Density Connectors........................................................................ 1 Specifications.................................................................................
More informationNTC Thermistor Assemblies
FEATURES Standard and custom assemblies are available in a variety of configurations Assemblies can conveniently attach to or be an integral part of any system to monitor or control temperature No added
More informationPRODUCT CATALOG
www.hillsdaleterminal.com 2017 PRODUCT CATALOG Fuse Pullers 34 Heat Shrink Terminals 24 your needs or for additional information about our Heat Shrink Tubing 25 products and services. Heavy Duty Electrical
More informationI Non-magnetic D-Sub Connectors
Non magnetic D-Sub Connectors Section I Non-magnetic D-Sub Connectors 5 Non magnetic D-Sub Contents Non magnetic D-Sub Connectors Cross reference table for ESA/SCC/SOURIAU/GSFC...7 Quality Assurance Testing...7
More informationLIFEMIST NT WATER DISTILLER
LIFEMIST NT WATER DISTILLER REPLACEMENT PARTS MANUAL AND WIRING SCHEMATIC FOR MODEL: NT, LM-AED-1 & LM-APK-1 PART # 500033 500035 500034 SERIES 0014 0002 0001 02/08/11 PAGE 1 097079-S14A 02/08/11 PAGE
More informationCONNECTORS & RECEPTACLES
60 HEX NUT Used in mounting rear or front of panel receptacles LOCK WASHER Prevents rear or front of panel receptacle from working loose when installed TYPICAL SL172F REAR MOUNT RECEPTACLE THREADED BUSHING
More informationSMC SERIES Subminiature Coaxial Connectors
SERIES Subminiature Coaxial Connectors FEATURES Subminiature coaxial connectors with 50 Ω impedance for applications up to 0 GHz. (screw on mechanism)fulfills the subminiature coaxial connector requirement
More informationBattery Products. Call or Fax:
Call 905.820.6150 or 1.800.363.1588 ax: 905.820.6142 Email: sales@techspan.ca Battery Products What s New? Epoxy Coated Battery Terminals 3-Way Top Post Battery Terminals Quick Disconnect Top Post Battery
More informationVoice/Data/ Video Tools
Voice/Data/ Video Tools Professionals prefer Klein's high quality materials and construction for durable long-lasting tools. Klein VDV Tools provide time savings and reliability, especially in high-volume
More informationANR SPECIFICATIONS. MATERIALS RoHS COMPLIANT - E222871
Wide variety of applications from consumer electronics to commercial Standard epoxy sealed terminations Gold contacts available for low power applications Available support brackets for greater stability
More informationDEUTSCH HDJ Series Filter Connectors MIL-DTL SERIES I.5
DEUTSCH HDJ Series connectors are subminiature environment-class connectors with high and medium-density insert arrangements. They are based on MIL-DTL-38999 Series I coupling interface lengths and Series
More informationTest & Instrumentation
Test & Instrumentation PARTS & ACCESSORIES The CLIFF range of test lead and instrument parts is made from high grade engineering plastics and precision metal parts. The parts comply with EN61010 Sec 2-031
More informationShell material Insulator Contacts Sealing Temperature Mating Protection
Technical Data Shell material Machined components: die cast components: Shell plating: Cable entry: Copper-Zinc alloy (CuZn) Zinc (GD-Zn) Nickel (Ni) plated max. 10 mm Insulator Connector inserts: Polyamid
More informationProfessionals Trust Pomona Performance
Professionals Trust Pomona Performance Test and Measurement Calibration RF Audio / Video / Broadcast Automotive Telecom 2008-2009 RoHS Table of Contents 2 3 New Products 5 Customized Products 6 Coaxial
More informationPARTS LIST CHARGER 2022 DB
PARTS LIST CHARGER 2022 DB SAVE THESE INSTRUCTIONS CHASSIS AND DRIVE ASSEMBLY 101 2694069 #40 ROLLER CHAIN 57 LINKS WITH MASTER 1 2694081 #40 ROLLER CHAIN 57 LINKS NO MASTER 1 2795211 LINK MASTER #40 CHAIN
More informationSAF-T-LINER MVP-ER PARTS MANUAL. Doors Section. Page 4-1. Doors 10/96
Doors Section Doors Page 4-1 Stepwell - Outward Opening Page 4-2 Doors Stepwell - Outward Opening Item Part Num. Number Qty. Description Notes 1 47001449 1 Trim - Step, Entrance, Diamond Plate 2 47001450
More information