|
|
- Anna Day
- 6 years ago
- Views:
Transcription
1
2
3
4
5
6
7 Vectra On-Line 1500 Part Numbers and Prices Page 1 Vectra On-Line 1500 Part # Part Description Ab Crunch Strap Ab Swivel Pulley assembly Ab Swivel Pulley bracket- without pulley & hardware Access Door (painted) 2.5AO Add-on plate- 2.5 pound 5.0AO Add-on plate- 5 pound Adjustable Pulley assembly- with pulley (adjustment bolt #14210 is separate) Adjustable Pulley Bracket- no pulley or hardware Bearing- freeway for most pivot points, used with #13790 button head bolts Bench assemby- without upholstery Bench Back Brace Bench Rail weldment Bench Seat Frame Bolt- ¼-20 X 1.25 hex for lat hold down Bolt- ½ dia. X 3/8 long shoulder for press handle Bolt- 1/2-13 X 1 button head for most freeway bearing pivot points Bolt- 1/4 X 20 X.75 for mounting upholstery Bolt- 3/8-16 x ½ blk for frame OBSOLETE (replaced with #55870) Bolt- 3/8-16 x ½ blk hex with flange for frame Bolt- 3/8-16 X ¾ blk hex for frame OBSOLETE (replaced with #55860) Bolt- 3/8-16 X ¾ blk hex with flange for frame Bolt- 3/8-16 X 1.25 to attach some pulleys (metal on 1 side) Bolt- 3/8-16 X 1.5 for columns, pulley assemblies (double, single, adj., etc.) Bolt- 3/8-16 X 1.75 for most pulley assemblies & column caps Bolt- 3/8-16 X 2.75, used on leg/ab station Bolt- 3/8-16 X 3 for top plate Bolt- 3/8-16 X 4 for most adjustable pulleys Bolt- 5/16 X.625, ¼-20 shoulder for Squat Latch Bolt- 5/16-18 X 1.5 for guide rod threaded inserts Bolt- 5/16-18 X 2½ hex for bench strut Bolt- 7/16-14 X 1.75 SHC for Ivanko top plate using aluminum shaft Bolt- shoulder ½ dia. X 3/8 L x 3/8-16 OBSOLETE (replace by 48830) Bolt- slotted for old Ivanko version top plate (uses nut) (not in Encore) Bracket- for double-moving pulley (2 required) Bumper- bottom of weight stack OBSOLETE (replaced with two each #57670) Bumper- for butterfly cam & leg/ab seat rest Bumper Tube- for butterfly arm pawl Bumper weight stack (two required)- replaces single piece Bumper/Plug- new 3/4 inch stem version for b/fly cam and calf/row block Bushing- bronze for butterfly cams Bushing- nylon for butterfly arm Bushing- nylon for pivot pulley Bushing- weight plate (all) & top plate Butterfly Arm assembly- left-side Butterfly Arm assembly- right-side for Butterfly Cam assembly- left-side Butterfly Cam assembly- right-side Cable- "C" pulley " long Cable- ab crunch- 96.0" long Cable- butterfly station " long Cable- butterfly station pre-arc system " long (5.5" stripped on each side) Cable- high pulley " long Cable- high pulley " long Cable- low pulley " long (24.0" stripped) Cable- press column for machines prior to 1990 ONLY " long Cable Retainer- old style leg developer and butterfly cam Prices are subject to change without notification. Vectra store price takes precedence.
8 Vectra On-Line 1500 Part Numbers and Prices Page 2 Vectra On-Line 1500 Part # Part Description Cable Set pre-arc system Cable Set with ARC system Cable Splice Clip- where 2 cables come together- uses #27990 plug Cable Tie Calf/Row Block CGPB Close Grip Press Attachment Set- Black- allows close grip exercises on press arms CGPCP Close Grip Press Attachment Set- Classic Pewter- for close grip exercises on press arms CGPSS Close Grip Press Attachment Set- Sterling Silver- for close grip exercises on press arms CGPW Close Grip Press Attachment Set- White- allows close grip exercises on press arms Close Grip Press Attachment- right-side Close Grip Press Attachment- left-side Column Cap- for press station Cotter Pin- 3/16 X 1.5 inch for butterfly arms/cams (used w/#13750 washer) Cotter Pin- hairpin for 1500 bench Cover/Shied- plastic for press adjust (early version) Curl Bar assembly- (straight) BLACK only Double Moving Pulley assembly- with pulleys & hardware E-Ring- 5/16 X.035 for press adjust Floor Piece/Board- left side Floor Piece/Board- right side Foam Roller Frame Member (weldment)- main column to leg/ab column (45.32 inches) Frame Member- leg/ab column to press column (29.61 inches) Frame Member- main column to press column (26.52 inches) Frame Member- stack base Grip- 4 Inch for inner section of lat bar Grip- 7/8 I.D. X 8 inch- standard- REPLACED with #61890 "SS Cap" version Grip- 8-inch "SS Cap" version- replaces # Guide Rod does NOT include tube connector, spacer or bolt Handle- Single Grip 8-inch strap (replaces D-Handle) Hardware/Bolt Kit Label- "Manufactured by..." Label- "Vectra" 8 inch Label- "Warning..." for wt. guard Label- "Warning " for bench Label- Arc for butterfly arm Label- Large "Vectra 1500" Label- left-side squat Label- right-side squat Label- wt. stack number sheet standard stacks -REVISED 12/04 <comment> Lat Bar assembly Lat Hold Down- deluxe version Latch- Squat Attachment left & right- for original version squats only Leg Developer assembly OBSOLETE (replaced with #48350) Leg Developer assembly with foam rollers OBSOLETE Leg Developer Mounting Bracket (banana) Leg Developer w/o rollers OBSOLETE Leg Developer- current version with contoured leg pads Cable- Leg extension- 57.5" long (12.5" stripped) Leg/Ab Seat Bottom assembly- w/upholstery, handle, banana <comments> Leg/Ab Seat Handle/Lock assembly- with lock/latch Leg/Ab Station assembly Upholstery - Leg/ab station seat bottom Leg/Ankle Strap Low Pulley Bracket- 4½ Inch without pulley and hardware Low Pulley Bracket OBSOLETE Prices are subject to change without notification. Vectra store price takes precedence.
9 Vectra On-Line 1500 Part Numbers and Prices Page 3 Vectra On-Line 1500 Part # Part Description Main Column assembly Manual- On-line Nut- ½-13 hex jam used with original slotted top plate bolt Nut- 1/ Nut- locking 3/8-16 hex for most pulley assemblies Nut- locking 5/16-18 for bench strut bolt O-Ring-.75 ID for leg strap and ab strap O-Ring- 1 ID X 1/8 W neoprene for ORIGINAL selector pins O-Ring ID for butterfly arm Padding- center of curl and lat bar, etc. (1 per bar)- replaces Padding- center of curl and lat bar, etc. Obsolete- replaced with Pawl- for butterfly arms Pin- retainer pin for single piece squat attachment Pin/Dowel-.25 DIA X 1 for butterfly arm pawl Pivot Bar- for leg/ab station seat assembly (uses #14500 screw) Platform assembly Platform Floor Board (only) Platform weldment (only) Plug (Christmas tree)- black plastic for cable retainer openings Poster- On-line Press Arm assembly Press Column assembly Press Latch weldment Press Lever assembly- aka pivot arm Pulley- 4.5-inch Release Pawl/Lever- for adjustable lat hold down Retainer- for cable on leg developer and top of weight stack Roll Pin- 5/16D X 1.25 for standard & current version leg developer Roll Pin- 5/32D X 7/8L for swivel pulleys, butterfly arm pawls, etc Safety Tread- for calf/row block Screw- ¼-20 X.50 phillip for seat pivot bar Screw- ¼-20 X 1.25 OPH for butterfly arm pads and D-handle Seat Arm Lock weldment Seat Handle weldment Selector Pin- ORIGINAL Vectra Precision plates ONLY OUT OF STOCK Selector Pin- short (4-3/8 in shaft) ORIGINAL Vectra Precision 10 LBS plates ONLY Selector shaft- aluminum, used w/ivanko top plate (requires bolt)- see Ken Selector Shaft- standard for 210 and 260 pound weight stacks (20 hole) Shaft-.05 DIA used on bench rail Shaft- 5/16 X 3.25 grooved, used in press arm adjustment <comment> Shaft Retainer-.5 shaft (large) for most shafts Single Moving Pulley assembly- with pulley & hardware Single Moving Pulley bracket- no pulley & hardware Spacer-.615 X.25 X.375L nylon for D-handle Spacer-.81 X.52 X.5 nylon for guide rods Spring- butterfly arm pawl Spring Pin-.25 X 2.75 for lat/leg hold down & press handle Spring Pin- used on original version squat latch Spring- squat latch ORIGINAL versin LEFT-side (modified) Spring- squat latch ORIGINAL versin RIGHT-side (modified) Spring- torsion for press adjust (Ken has these) Squat Attachment- left-side Squat Attachment- original SINGLE/Original piece Squat Attachment- right-side Tension Rod Pulley Bracket assembly- w/pulley hooks onto press pivot Tension Rod Pulley Bracket weldment- w/o pulley- hooks onto press pivot Prices are subject to change without notification. Vectra store price takes precedence.
10 Vectra On-Line 1500 Part Numbers and Prices Page 4 Vectra On-Line 1500 Part # Part Description Tie- 4 inch plastic Top Plate (original)- weight stack Touch-Up Paint- Black bottle Touch-Up Paint- Black can Touch-Up Paint- Silver bottle Touch-Up Paint- Silver can Touch-Up Paint- White bottle Touch-Up Paint- White can Trim Strip- for leg/ab station, calf/row block (generic#, not for specific location) Tube Closure/End Cap- ½ X 1½ BLUE for adjustment levers Tube Closure/End Cap- 1 inch round for current squat attachments (9/00) Tube Closure/End Cap- 1 X 2 X 10-14GA, used on bench & older press arms Tube Closure/End Cap- 1" DIA X 14GA use on press adjust Tube Closure/End Cap inch for end of press handle Tube Closure/End Cap- 1 x 3 for bench rail Tube Closure/End Cap- 1½ X 14 GA Tube Closure/End Cap- 2 X 2 X 14GA for main column at b/fly & press pivot Tube Closure/End Cap- round single piece closure/retainer for foam rollers Tube Connector- 1/4-20 X 3/4 threaded insert for D-handle Tube Connector- 5/16-18 X 1" threaded insert for guide rods Upholstery- butterfly arm main pad (only) Upholstery- butterfly arm pad (2 required) Upholstery- butterfly arm pad backing (only) Upholstery- seat back bench Upholstery- seat back butterfly station Upholstery- seat back leg/ab station Upholstery- seat bottom bench Upholstery- seat bottom butterfly station Upholstery Set Upper Stack Support assembly- with pulley Washer-.688 X.39 X.03 black nylon for C-1 bench Washer- 3/8 blk SAE flat, for some old-style frame bolts OBSOLETE Washer- 7/8-16 X ½ X 14GA Washer- black nylon Washer- finishing for D-handle and butterfly arm pads Washer- neoprene bumper for top plate- standard Prices are subject to change without notification. Vectra store price takes precedence.
Vectra On-Line 1270 Part Numbers and Prices Page 1
Part Numbers and Prices Page 1 57900 Access Door (painted) 20160 Access Door- notched, used at base of main column 2.5AO Add-on plate- 2.5 pound 5.0AO Add-on plate- 5 pound 14200 Adjustable Pulley assembly-
More informationVectra On-Line 3800 Part Numbers and Prices Page 1 Vectra On-Line 3800 Part # Part Description 69020 Ab Crunch Strap 55850 Ab Pulley assembly- with pulley & hardware 54790 Ab Pulley Bracket- without pulley
More informationVectra On-Line 1850 Part Numbers and Prices Page 1
Part Numbers and Prices Page 1 69020 Ab Crunch Strap 55850 Ab Pulley assembly- with pulley- TWO VERSIONS- Revised 9/20/02 54790 Ab Pulley Bracket- without pulley- TWO VERSIONS- Revised 9/20/02 57900 Access
More informationVectra VX-38 Part Numbers and Price Page 1
Vectra Part Numbers and Price Page 1 69020 Ab Crunch Strap 58150 Ab Pulley assembly- with pulley 58140 Ab Pulley Bracket- without pulley 57900 Access Door (painted) 2.5AO Add-on plate- 2.5 pound 5.0AO
More informationVectra On-Line 4850 Part Numbers and Prices Page 1
Part Numbers and Prices Page 1 69020 Ab Crunch Strap 58150 Ab Pulley assembly- with pulley- TWO VERSIONS- Revised 9/20/02 58140 Ab Pulley Bracket- without pulley- TWO VERSIONS- Revised 9/20/02
More informationVectra On-Line 1650 Part Numbers and Prices Page 1
Part Numbers and Prices Page 1 69020 Ab Crunch Strap 57900 Access Door (painted) 2.5AO Add-on plate- 2.5 pound 5.0AO Add-on plate- 5 pound 60760 Adjustable Pulley assembly (main column) 52710 Bar- stack
More information19 12A 12B 14E 11C 14A 11B 14D 14G 14H 14F FITNESS VFT-100 WITH SWIVELING DOUBLE PULLEYS
26 23 20 24 25 22 21 27 35 3 19 12A 17 1 12B 14E 11C 14A 11B 14D 14G 14H 14F 45 46 15 2 38-41 11M 13 16 18 6 11D 11A 7 8 4 11G-11L 11F 9 10 5 FITNESS VFT-100 WITH SWIVELING DOUBLE PULLEYS VFT100 PARTS
More information8R 8S 19 7A 8J 8I 6K 6J 6I 6H 6F 6E 6G 6C 6B FITNESS VX-FT 2/09
1C 3A 2 1E 1G 3D 3C 1D 1F 4A 4B 4C 5A 5B 5C 5D 19 7A 7B 7E 7D 7C 7F 7G 7H 7I 8R 8S 8A 8A 8B 8C 8D 8E 8F 8G 8H 8L 8M 8K 8J 8I 8N 8O 8P 8Q 9A 9B 9C 9D 9E 9G 9H 9I 9J 9K 9L 9M 10 11 12 13 13 17 18 20 20 FITNESS
More informationPERFORM THE FOLLOWING SAFETY CHECK DAILY:
FITNESS Introduction We at Vectra Fitness appreciate your selection of our product for your fitness program, and invite your questions and comments. We're sure that you ll be pleased with your new Vectra
More informationHIGH/LOW PULLEY OWNER'S MANUAL
TM HIGH/LOW PULLEY OWNER'S MANUAL REVISED: Nov. 10,199 10 10 SERIAL NO.'S through 1 116 11 Contents Parts Manual 1 BOOM ASSEMBLY 2 REVISION 1 BOOM ASSEMBLY WORKBOX & MOVEMENT ARM TO BASE ASSEMBLY BASE
More informationPRO 2 SERIES PSLCSE LEG CURL
PRO SERIES PSLCSE LEG CURL Page Customer Support Services PARTS MANUAL CONTENTS PAGE COMPONENT ASSEMBLY COMPONENT ASSEMBLY LEGEND SIDE FRAME ASSEMBLY 5 SIDE FRAME ASSEMBLY LEGEND 6 SEAT FRAME ASSEMBLY
More informationCOMPACT STANDON ER32FS600VL ER36FS600VL ER36FS600VLCA
COMPACT STANDON PARTS MANUAL ER32FS600VL ER32FS600VLCA ER36FS600VL ER36FS600VLCA 2 ENCORE MANUFACTURING A DIVISION OF WORLDLAWN POWER EQUIPMENT, INC. ENCOREEQUIPMENT.COM 401 N. COMMERCE STREET BEATRICE,
More informationPRO SERIES II PSAB ABDOMINAL CRUNCH. Customer Support Services PARTS MANUAL. 1Page 1 of 9
PRO SERIES II CRUNCH Customer Support Services PARTS MANUAL 1Page 1 of 9 CRUNCH Notes: Page of 9 CRUNCH Contents PAGE COMPONENT ASSEMBLY...4 MAIN FRAME ASSEMBLY...5 SIDE FRAME ASSEMBLY...6 ADJUSTABLE SEAT
More informationSIGNATURE SERIES FZAB ABDOMINAL. Customer Support Services PARTS LIST. Page 1
SIGNATURE SERIES FZAB ABDOMINAL Page 1 Customer Support Services PARTS LIST Contents PAGE COMPONENT ASSEMBLY 3 COMPONENT ASSEMBLY II 4 COMPONENT ASSEMBLY LEGEND 5 FZ SEAT CARRIAGE ASSEMBLY 6 FZAB ADJUSTER
More informationBulb Number Part Number Description SPACER
Bulb Number Part Number Description 12 12000-398 SPACER 24 12060-200 MAIN FRAME 38 12090-322 FOOT PAD 52 CM000211 DECAL, PATENT PENDING 57 GB000202 BELT.95 WIDE, SEE DRAWING FOR LENGTH 58 GP000209 PULLEY
More informationHydrostatic Zero-Turn Commercial Riding Mower
Hydrostatic Zero-Turn Commercial Riding Mower Professional Turf Equipment 54" Fabricated Deck ILLUSTRATED PARTS LIST TABLE OF CONTENTS Frame Assembly.................................. 3 54" Fabricated
More informationCABLE MOTION SERIES MJLPD MULTI JUNGLE DUAL PULLEY PULLDOWN. Customer Support Services PARTS LIST. Page 1
CABLE MOTION SERIES MJLPD MULTI JUNGLE DUAL PULLEY PULLDOWN Page Customer Support Services PARTS LIST CONTENTS PAGE MJCORE ASSEMBLY COMPONENT ASSEMBLY COMPONENT ASSEMBLY LEGEND MJ CORE CONNECTING HARDWARE
More informationF3 Dual Tower Trainer F3DTT
F3AT TOWER BOM (Quantities shown in table on the left are for (1) Tower. Actual quantity per machine is double.) PART NO. QTY. DESCRIPTION 01-0011 2 ½ -13 UNC x 3 Bolt 01-0020 1 7/16-14 UNC x 5 Bolt 01-1331
More information13AU609H063 (1999) Page 1 of 25 Axle & Wheels Front And Steering Assembly
13AU609H063 (1999) Page 1 of 25 Axle & Wheels Front And Steering Assembly 13AU609H063 (1999) Page 2 of 25 Axle & Wheels Front And Steering Assembly 1 683-0304 1 S Frame 2 710-0604A 1 /P Self-tapping Screw,
More informationParts Manual Rev. A RZT48 /
115 91 36-2 Rev. A Parts Manual RZT48 / 96 62001-00 Please read the operator manual carefully and make sure you understand the instructions before using the machine. Gasoline containing a maximum of 10%
More information25 Horsepower Hydrostatic Zero-Turn Commercial Riding Mower
MMZ 2, 260 2 Horsepower Hydrostatic Zero-Turn Commercial Riding Mower ILLUSTRATED PARTS LIST " Float Cutter Deck - Figure 1 3 1 27 32 17 6 1 11 31 36 3 19 7 23 1 33 38 18 37 22 3 20 2 10 2 12 21 30 39
More informationPRO 2 SERIES PSSLPSE SEATED LEG PRESS. Customer Support Services PARTS MANUAL
PRO SERIES PSSLPSE SEATED LEG PRESS Customer Support Services PARTS MANUAL CONTENTS Page COMPONENT ASSEMBLY COMPONENT ASSEMBLY LEGEND SIDE FRAME ASSEMBLY 5 SIDE FRAME ASSEMBLY LEGEND BASE FRAME ASSEMBLY
More informationBulb Number Part Number Description PIN, DETENT
Bulb Number Part Number Description 1 8229 PIN, DETENT 2 11040-440 KNOB 3 11040-443 DECAL, KNOB 5 12060-347 PIVOT PIN 9 16010-311 FOOT PAD 20 18020-202 W TOP FRONT CROSS TUBE 21 18020-203 W TOP REAR CROSS
More informationParts Manual Rev. B RZT48 /
115 91 36-2 Rev. B Parts Manual RZT48 / 96 62001-00 Please read the operator manual carefully and make sure you understand the instructions before using the machine. Gasoline containing a maximum of 10%
More informationS5LATP LAT PULLDOWN. Last Rev Date: 12/16/10. Nautilus Nitro Plus. Parts List Nitro Plus/QTY. Nitro Plus/QTY. Number
Number Nitro Plus/QTY. 0-00 5 ½ -3 UNC x 3 Bolt 0-05 3/8-6 UNC x ½ Bolt 0-5 3/8-6 UNC x ¾ Bolt 0-90 5/8- UNC x Bolt 0-553 3 3/8-6 UNC x ½ Bolt 0-56 ½ -3 UNC x Bolt 0-56 ½ -3 UNC x 3¾ Bolt 0-56 3 ½ -3 UNC
More informationLEG EXTENSION OWNER'S MANUAL
TM LEG EXTENSION OWNER'S MANUAL REVISED: Sept. 2,1998 90 98 19 10 P 110 9 50,52A 150 SERIAL NO.'S through 109 1 2 5 6 8 Contents Parts Manual SEAT FRAME / CROSSMEMBER ASSEMBLY SEAT FRAME ASSEMBLY WORKBOX
More informationChampion Series Zero-Turn Riders & Mower Decks
Parts Manual Champion Series Zero-Turn Riders & Mower Decks HP Tractors Mfg. No. Description Champion, HP Zero-Turn Rider Champion, HP Zero-Turn Rider (CE) 0HP Tractors Mfg. No. Description Champion, 0HP
More informationModels 820 and 840 2
Models 820 and 840 2 Models 820 and 840 1 783-0250 Hood 2 738-0952 Shld. Bolt.375" Dia. x.5" 3 736-0175 Spr. Washer.265" I.D. x.562" OD 4 710-0751 Hex Bolt 1/4-20 x.62" * 6 7-0271 Hex Sems Nut 1/4-20 Thd.
More informationIllustrated Parts Manual
Illustrated Parts Manual 00 Series Snow Thrower Two Stage MTD LLC, P.O. BOX 331 CLEVELAND, OHIO 13-001 Printed In USA Form No. -033 (August 2, 200) Auger & Auger Housing 5 1 1 13 3 25 23 1 15 53 1 2 22
More informationEVO S9PO S9PO REV M. Red: PAINTED ITEMS Blue: KITS.
Number /QTY. DESCRIPTION 01-1115 2 3/8-16 UNC x 2½ Bolt 01-1258 6 ½ -13 UNC x ¾ Bolt 01-1524 1 5/8-11 UNC x 8 Bolt 01-1552 3 3/8-16 UNC x 4 Bolt 01-1554 1 3/8-16 UNC x 5 Bolt 01-1564 3 ½ -13 UNC x 4½ Bolt
More information32 FRONT DECK ASSEMBLY
4 8 K 0 0 PARTS MANUAL 3 FRONT DECK ASSEMBLY 3 1 Belt Shield Prior to SN 33333 4 6 1 7 4 6 14 8 13 1 9 10 11 7 8 1 16 19 17 30 36 39 39 37 9 60 6 61 3 9 49 41 40 8 48 4 13 43 44 47 46 Spindle Assy Prior
More information3 Owner s Manual P E R S O N A L G Y M. Serial Number Here. Date of Purchase
Revision 5 FEB 2016 P E R S O N A L G Y M Owner s Manual Serial Number Here Date of Purchase www.batcafitness.com 1207 New Hope Road, Raleigh, NC - 919.255.1233 - Fusion www.batcafitness.com 3 Owner s
More information3 Owner s Manual. Serial Number Here. Date of Purchase New Hope Road, Raleigh, NC Fusion
Revision 2 Feb. 2013 Owner s Manual Serial Number Here Date of Purchase www.batcafitness.com 1207 New Hope Road, Raleigh, NC - 919.255.1233 - Fusion www.batcafitness.com 3 Owner s Manual Instructions Congratulations
More informationParts Manual for the Wright Z
Parts Manual for the Wright Z Serial numbers 40581 & Higher Check www.wrightmfg.com for the latest revision Rev 6/2010 Shown with OPTIONAL Grass Collection System 2010 Wright Manufacturing Inc., All Rights
More informationBulb Number Part Number Description KNOB
Bulb Number Part Number Description 2 11040-440 KNOB 4 12040-357 PIN, DETENT 5 12060-347 PIVOT PIN 9 16010-311 FOOT PAD 19 18010-007 HANDLE ASSEMBLY - LONG 22 18010-203 W HANDLE BAR 23 18010-204 W MOUNTING
More informationBulb Number Part Number Description BLOCK, STOP
Bulb Number Part Number Description 1 11000-384 BLOCK, STOP 2 11040-301 CLAMP BLOCK INSERT 6 12000-307 PIN, PIVOT 7 12000-337 SHAFT, PIVOT, 12.75 11 12000-345 FOOT PAD, 4.00 x 7.00 19 12000-398 SPACER
More informationREAR ENGINE RIDER 42 MOWER SERIES 22
Parts Manual for REAR ENGINE RIDER MOWER SERIES MODELS 1BVE CONTENTS DESCRIPTION PAGE(S) DESCRIPTION PAGE(S) WHEELS- TIRES... - FRONT END, STEERING.... - MAIN CASE... - DIFFERENTIAL, R. H. FENDER... 8-9
More informationSIGNATURE SERIES FZPD PULL DOWN
SIGNATURE SERIES FZPD PULL DOWN Page Customer Support Services PARTS MANUAL CONTENTS PAGE COMPONENT ASSEMBLY COMPONENT ASSEMBLY II 4 COMPONENT ASSEMBLY LEGEND SEAT CARRIAGE ASSEMBLY SEAT CARRIAGE ASSEMBLY
More informationCW619KAS P/N: CW SUBREV: C DRAWN BY: VLE DATE: SHEET 1 OF 5
GUIDE RODS/WEIGHTS, SHEET 5 CAM/LEG ADJUSTMENT, SHEET 4 THIGH PAD, SHEET 3 FRAME/COMPONENTS, SHEET 2 DRAWN BY: VLE DATE: 11.11.09 SHEET 1 OF 5 85 84 71 62 45 56 63 36 23 75 24 21 351 22 352 353 350 25.01-25.03
More informationPRONE LEG CURL OWNER'S MANUAL
TM TM 97 105 19 1 1 73 PRONE LEG CURL OWNER'S MANUAL REVISED: May 15,1998 119 51 SERIAL NO.'S through Contents Parts Manual 1 3 4 5 6 7 8 SEAT FRAME ASSEMBLY WORKBOX & CROSSMEMBER ASSEMBLY MOVEMENT ARM
More informationSignature Series Single Station Lat Raise
Signature Series Single Station Lat Raise FZLR Parts List 8//0 CONTENTS FRAME AND UPHOLSTERY COLORS.. SHROUD OPTIONS. 4 COMPONENT ASSEMBLY.. 5 COMPONENT ASSEMBLY II. 6 COMPONENT ASSEMBLY LEGEND.. 7 FZ
More informationF3CC-E CABLE CROSSOVER. Freeweight. Parts Diagram. Blue: KITS Red: PAINTED ITEMS.
F3AT-E TOWER BOM (Quantities shown in table below are for (1) Tower. Actual quantity per machine is double.) PART NO. F3AT-E/QTY. DESCRIPTION 01-0011 2 ½ -13 UNC x 3 Bolt 01-1331 2 ½ -13 UNC x 2¾ Bolt
More informationParts Manual for the Wright Z
Parts Manual for the Wright Z Serial numbers 40581 & Higher Check www.wrightmfg.com for the latest revision Rev 9/2007 Shown with OPTIONAL Grass Collection System 2006 Wright Manufacturing Inc., All Rights
More informationNITRO PLUS ROTARY TORSO S5RT REV J
Red: PAINTED ITEMS Blue: KITS 1. All labeled components are to be assembled before shipment unless otherwise noted. 2. All bearings are to be pressed in with force applied to outer ring only. 3. All hardware
More informationTECHNICAL DATA BROCHURE - ZTR 424 & 427 DATE 8/85 PAGE 1 OF 8
TECHNICAL DATA BROCHURE - ZTR 424 & 427 DATE 8/85 PAGE 1 OF 8 IMPORTANT - READ OPERATOR'S MANUAL BEFORE OPERATION OR MAKING ADJUSTMENTS Deluxe Seat Adjustment Easy hand lever action allows forward and
More informationHANDLEBAR AND CONSOLE ASSEMBLY
Section 6 Parts List HANDLEBAR AND CONSOLE ASSEMBLY 4 33 47 4 49 7 3 78 4 97 46 44 37 38 37 48 39 35 36 34 7 3 4 5 45 4 3 4 0 33 9 96 80 6 300 84 9 5 30 4 9 30 4 3 43 97 0 43 3 68 9 9 Models 753B, F753B
More informationTECHNICAL DATA BROCHURE ZTR 308/3II
Date 8/84 Page 1 of 6 TECHNICAL DATA BROCHURE ZTR 308/3II IMPORTANT - READ OPERATOR'S MANUAL BEFORE OPERATION OR MAKING ADJUSTMENTS. ' Seat Adjustment Loosen bolts on sliding brackets under each side of
More informationFIT SERIES FIT-3 W/ LEG PRESS
FIT SERIES FIT-3 W/ LEG PRESS ASSEMBLY INSTRUCTIONS Part # 734820 Rev C. Revision:4/04/03 KEY 2 3 4 5 6 7 8 9 0 2 3 4 5 6 7 8 9 20 2 22 23 24 25 26 27 28 29 30 3 32 33 34 35 36 37 38 39 40 4 42 PART #
More informationSignature Series Single Station Leg Extension FZLE. Parts List
Signature Series Single Station Leg Extension FZLE Parts List 9/6/0 CONTENTS FRAME AND UPHOLSTERY COLORS.. SHROUD OPTIONS. 4 COMPONENT ASSEMBLY.. 5 COMPONENT ASSEMBLY II. 6 COMPONENT ASSEMBLY LEGEND..
More informationReproduction. Not for REAR ENGINE RIDER HYDRO DRIVE 33" 15.5 TP RE SERIES. Parts Manual for RE210
Parts Manual for REAR ENGINE RIDER HYDRO DRIVE 33" 15.5 TP RE SERIES Model No. Description 7800952-00 RE210 Briggs & Stratton Yard Power Products Group 535 Macon Road McDonough, GA, 30253 U.S.A. 800-935-2967
More informationRIDE ON MOWERS Model # Mini Rider. Issue A.0 ECN Sept 2014 PB Ref #
RIDE ON MOWERS Model # Mini Rider ECN 11649 Contents Frame & Fender............... Page 3 Drive System................. Page 4 Seat & Electrical......... Page 5 Front End Steering.............. Page 6
More informationIllustrated Parts List
Illustrated Parts List Hydrostatic Lawn Tractor IMPORTANT: Read safety rules and instructions carefully before operating equipment. Warning: This unit is equipped with an internal combustion engine and
More information21" STEEL DECK EASY LINE EUROPEAN WALK MOWER
Parts Manual for 21" STEEL DECK EASY LINE EUROPEAN WALK MOWER MODEL ESPV21 ESPV211 McDonough, GA, 30253 U.S.A. Briggs & Startton Yard Power Products Group Copyright 2007 Briggs & Startton Corporation Milwaukee,
More informationPRO 2 SERIES PSFLYSE PECTORAL FLY/REAR DELTOID
PRO SERIES PSFLYSE PECTORAL FLY/REAR DELTOID Page Customer Support Services PARTS MANUAL CONTENTS Page COMPONENT ASSEMBLY COMPONENT ASSEMBLY LEGEND STACK FRAME ASSEMBLY STACK FRAME ASSEMBLY LEGEND RIGHT
More informationREAR ENGINE RIDER EUROPEAN SERIES 22
Parts Manual for REAR ENGINE RIDER EUROPEAN SERIES 22 MODELS E2822BE E2822BE E1522KVE CONTENTS DESCRIPTION PAGE(S) DESCRIPTION PAGE(S) WHEELS, TIRES...2, DRIVE DISC ASSEMBLY... 22 FRONT END, STEERING...4,
More informationBulb Number Part Number Description PIN, DETENT
Bulb Number Part Number Description 2 8229 PIN, DETENT 4 11040-440 KNOB 17 11050-375 PIVOT PIN 18 11070-200 SEAT FRAME 22 11070-204 WEIGHT FRAME 24 11070-207 CUSHION TUBE 29 11090-369 SHAFT, PIVOT 30 11090-392
More informationMTS - MOTION TECHNOLOGY SELECTORIZED MTTE TRICEPS EXTENSION. Customer Support Services PARTS MANUAL. 1Page 1 of 18
MTS - MOTION TECHNOLOGY SELECTORIZED MTTE TRICEPS EXTENSION Customer Support Services PARTS MANUAL 1Page 1 of 18 Notes: 2Page 2 of 18 Contents PAGE COMPONENT ASSEMBLY...4 LEFT MOVEMENT ARM...5 RIGHT MOVEMENT
More informationMK-101 w/jcs Stand TILE SAW OWNER S MANUAL & OPERATING INSTRUCTIONS SERIAL NUMBER:
MK-0 w/jcs Stand TILE SAW OWNER S MANUAL & OPERATING INSTRUCTIONS CAUTION: Read all safety and operating instructions before using this equipment Enter the Serial Number of your new saw in the space below.
More informationSECTION 12: ILLUSTRATED PARTS LIST
SECTION : ILLUSTRTED S LIST (for choke) (for throttle) 0 0-0 Screw, #- x.0 0-0 Screw, /- x.0 0-0 Screw, /- x.0 0- Screw, #0- x. 0- Socket Cap Screw, /- x. 0- Self-tapping Screw, /- x. -00 Flange Lock Nut,
More informationHUSQVARNA ROTARY LAWN MOWER - - MODEL NUMBER (PRODUCT NUMBER 6021P) REPAIR PARTS
HUSQVARNA ROTARY LAWN MOWER - - MODEL NUMBER 917.510 (PRODUCT NUMBER 6021P) 1 2 3 59 23 6 43 42 6 13 12 11 14 7 40 50 4 14 5 76 77 75 47 67 15 21 1 46 41 47 65 32 25 52 22 19 39 49 61 REPAIR PARTS 10 39
More informationParts Manual Rev. A RZT54 /
115 93 37-27 Rev. A Parts Manual RZT54 / 967 672101-00 Please read the operator manual carefully and make sure you understand the instructions before using the machine. Gasoline containing a maximum of
More informationSCROLL SAW SS-10 PART NO DATE:
40-680 20 SCROLL SAW SS-10 PART NO. 1342406 DATE: 06-09-04 Page1/ SS-10/DEB REPLACEMENT PARTS 1 n 901-02-050-5634 6-32 X 1/2" ROUND HD SCREW 2 1342281 WEDGE 3 1342285 UPPER BRACKET 4 1342261 BUSHING 5
More informationF3 Adjustable Tower Dual Stack Medical (With EVO Stack) F3ATM-E REV A
F3AT TOWER BOM (Quantities shown in table below are for (1) Tower. Actual quantity per machine is double.) PART NO. (EVO STACK)/QTY. DESCRIPTION 01-0011 2 ½ -13 UNC x 3 Bolt 01-1331 2 ½ -13 UNC x 2¾ Bolt
More informationHydrostatic Zero-Turn Commercial Riding Mower
Hydrostatic Zero-Turn Commercial Riding Mower Professional Turf Equipment 0" Fabricated Deck ILLUSTRATED PARTS LIST TABLE OF CONTENTS Frame Assembly.................................. 3 0" Fabricated Cutter
More informationSignature Series Single Station Seated Leg Press FZSLP. Parts List
Signature Series Single Station Seated Leg Press FZSLP Parts List 7/5/0 CONTENTS FRAME AND UPHOLSTERY COLORS.. SHROUD OPTIONS. 4 COMPONENT ASSEMBLY.. 5 COMPONENT ASSEMBLY II. 6 COMPONENT ASSEMBLY LEGEND..
More informationMTD LLC, P.O. BOX CLEVELAND, OHIO
Illustrated Parts Manual Zero Turn Tractors MTD LLC, P.O. BOX CLEVELAND, OHIO -001 Printed In USA Form No. -0 (March, 0) Seat Adjustment, All Models 1 1 1 1 1 1 1. - Hex Hd. Wshr Screw, #- x.. -00 Flangelock
More informationWYZ34FS600VCA FOR SERIAL NUMBERS U02011 AND ABOVE
PARTS MANUAL WYZ34FS600V WYZ34FS600VCA FOR SERIAL NUMBERS 201610U02011 AND ABOVE 2 3 4 CONTENTS GENERAL INFORMATION... 6 SERVICE LOCATOR CHART... 7 DECK ASSEMBLY... 8 DECK LIFT ASSEMBLY... 10 FRAME ASSEMBLY...
More informationPlease read the operator manual carefully and make sure you understand the instructions before using the machine.
967327901-00 Parts Zero Manual Turn Mower Please read the operator manual carefully and make sure you understand the instructions before using the machine. When you need spare parts or support in service
More informationSelectScrub 17. PARTS LIST Kent MODEL This parts list is for machines after serial number /99 revised 8/02 FORM NO.
SelectScrub PARTS LIST Kent MODEL 530300 This parts list is for machines after serial number 959 3/99 revised /0 99-3 TABLE OF CONTENTS SelectScrub DESCRIPTION PAGE Chassis System... -3 Handle System...
More information365L (2001) Page 1 of 36 54" Deck Assembly
365L (2001) Page 1 of 36 54" Deck Assembly 365L (2001) Page 2 of 36 54" Deck Assembly 1 720-0241 1 S Wing Nut Knob 2 703-2817 1 Belt Cover LH 3 703-2816 1 Belt Cover RH 4 747-3306 1 Idler Spring Mounting
More informationParts Manual PZ Please read the operator manual carefully and make sure you understand the instructions before using the machine.
Parts Manual PZ 60 967 045601-00 Please read the operator manual carefully and make sure you understand the instructions before using the machine. When you need spare parts or support in service questions,
More informationPARTS LIST CHAMP 2929
PARTS LIST CHAMP 2929 1 ITEM PART NO. DESCRIPTION QTY. 101 9122343 3/8-16 X 2 HEX HEAD FULL THREADED BOLT 3 102 9122100 3/8 SPLIT LOCK WASHER 3 103 9121400 3/8 I.D. X 7/8 O.D. X.064/.104 THICK WROUGHT
More informationPersonal Care Commode
Parts Catalog Issued: Jun 2, 2009 Personal Care Commode Yes, you can. Parts Catalog Usage Guide The information contained in this document is subject to change without notice. This catalog contains service
More informationParts List for Sentar (For Serial Numbers Prior to 19729)
Parts List for Sentar (For Serial Numbers Prior to 19729) Replace with newer revisions as they become available 2006 Wright Manufacturing, Inc. All rights reserved Updated 08/2006 52", 61" CUTTER DECKS
More informationWRANGLER 1708AB, 2008AB
WRANGLER 1708AB, 2008AB WIRING DIAGRAM ITEM PART NO. DESCRIPTION QTY. 1 1393251 WIRE ASSEMBLY - CIRCUIT BREAKER TO BRUSH SWITCH 1 2 1393261 WIRE ASSEMBLY - CIRCUIT BREAKER TO VACUUM SWITCH 1 3 1393271
More information215E. Operator and Parts Manual MM158
5E Operator and Parts Manual MM58 This manual is furnished with each new TENNANT Model 5E This manual consists of Specifications; Operation; Maintenance; Appendix; the How To Use This Manual; Low Dump
More informationParts Manual SPEEDZTR 30 /
Parts Manual SPEEDZTR 30 / 966676201 Please read the operator s manual carefully and make sure you understand the instructions before using the machine. Gasoline containing up to 10% ethanol (E10) is acceptable
More informationParts Manual Zero Turn Mower / Z 248F
Parts Manual Zero Turn Mower / Z 248F 967262501-00 Please read the operator manual carefully and make sure you understand the instructions before using the machine. When you need spare parts or support
More informationPARTS LIST WRANGLER 1710AB, 2010AB 120V AND 240V, TYPE F PLUG
PARTS LIST WRANGLER 1710AB, 2010AB 120V AND 240V, TYPE F PLUG CONTROL PANEL ASSEMBLY 101 1394151 ROUND POWER SWITCH 1 102 0693141 RUBBER SWITCH BOOT 2 103 9122465.516 I.D. X.813 O.D. X.027/.030 THICK FLAT
More informationPlease read the operator manual carefully and make sure you understand the instructions before using the machine.
967327801-00 Parts Zero Manual Turn Mower Please read the operator manual carefully and make sure you understand the instructions before using the machine. When you need spare parts or support in service
More informationER48FX730VLCA ER52FX730VL ER52FX730VLCA
PARTS MANUAL ER48FX730VL ER48FX730VLCA ER52FX730VL ER52FX730VLCA 2 ENCORE MANUFACTURING A DIVISION OF WORLDLAWN POWER EQUIPMENT, INC. ENCOREEQUIPMENT.COM 2415 ASHLAND AVE BEATRICE, NE 68310 800-267-4255
More informationClassic12 Belt Sander
Classic12 Belt Sander Section II Parts and Service Manual AMERICAN SANDERS TECHNOLOGY Classic 12 Belt Sander Operator's Manual Page 21 Assembly Drawing #1 11/00 7 8 9 12 13 11 1 10 85 14 6 81 80 79 76
More informationSection B Detector September B
Section B Detector September 200 B Index No. Part No. Description. 2-0030-000 Link 2. 2-0208-000 Deck Hook Selector Assembly 3. 2-003-000 Spacer. -3000-000 Ball Bearing. 2-00-02 X-Washer Pin. 2-008-02
More informationCLUB SERIES GLUTE MACHINE
CLUB SERIES GLUTE MACHINE ASSEMBLY INSTRUCTIONS Part # 7109801 Rev D. 1 Revision:11/12/01 PARTS LIST KEY PART # DESCRIPTION QTY KEY PART # DESCRIPTION QTY 1 71086xx TOWER 1 11 3102901 3/8 X 1-1/4 BOLT
More informationMZ 52LE. Parts Manual. Zero Turn Mower /
Parts Manual MZ 52LE Zero Turn Mower / 9677406-00 Please read the operator manual carefully and make sure you understand the instructions before using the machine. When you need spare parts or support
More informationParts manual. Models: /ZEKW /ZEKW52210 MANUAL NO REV. 01 (02/23/06)
Parts manual Models: 968999295/ZEKW42170 968999296/ZEKW52210 MANUAL NO. 539 11 27 69 REV. 01 (02/23/06) MODEL NUMBER SERIAL NUMBER DATE PURCHASED DEALER ADDRESS NOTES: 2006 Yazoo/Kees Power Equipment.
More informationParts Manual MZ5225 /
Gasoline containing up to 10% ethanol (E10) is acceptable for use in this machine. The use of any gasoline exceeding 10% ethanol (E10) will void the product warranty. Parts Manual MZ5225 / 966690502 Please
More information34 DECK ASSEMBLY A. SEE THE DECAL LIST SECTION FOR ALL DECALS /8 STD. FLAT WASHER TENSIONER w/ BUSHING
3 4 B 1 8 Z PARTS MANUAL 20 21 21 24 24 25 25 26 26 33 34 41 38 39 51 38 37 72 36 43 47 48 44 60 80 35 33 40 50 42 34 30 65 32 66 59 58 57 58 59 18 52 29 49 83 83 17 17 6 7 9 79 50 50 63 72 72 80 64 64
More informationParts Manual MZ52 /
Gasoline containing up to 10% ethanol (E10) is acceptable for use in this machine. The use of any gasoline exceeding 10% ethanol (E10) will void the product warranty. Parts Manual MZ52 / 962401 Please
More informationORDERING REPLACEMENT PARTS
ORDERING REPLACEMENT PARTS If you encounter any difficulties or problems with this product, contact the ICON Fitness Lifestyle Ltd. office, or write: ICON Fitness Lifestyle Ltd. Greenwich House North Street
More informationSpartan Mower Parts Manual SRT
Spartan Mower Parts Manual SRT Revision Date -- TABLE OF CONTENTS SRT Front Fork Assembly... Brake and Floor Board assembly...- Height Indicator Assembly....- Actuator Assembly. Battery and Seat Suspension
More informationRZ3016. Parts Manual. Zero Turn Mower /
Parts Manual RZ30 Zero Turn Mower / 966612302-04 Please read the operator manual carefully and make sure you understand the instructions before using the machine. When you need spare parts or support in
More informationParts Catalog. S-Series Slicer Automatic. Model:
, 07 99509 ECN 077 Parts Catalog S-Series Slicer Automatic Model: SGA SGA 05/08/07 Rev. J IMPORTANT! TO EXPEDITE SHIPMENT OF PARTS, ALWAYS SPECIFY MODEL, REV, PART NUMBER, AND SERIAL NUMBER OF UNIT. GLOBE
More informationPRO 2 SERIES PSBCSE BICEPS CURL
PRO SERIES PSBCSE BICEPS CURL Customer Support Services PARTS MANUAL CONTENTS Page COMPONENT ASSEMBLY COMPONENT ASSEMBLY LEGEND SIDE FRAME 5 SIDE FRAME ASSEMBLY LEGEND MOVEMENT ARM ASSEMBLY MOVEMENT ARM
More informationFloorCrafter Belt Sander
FloorCrafter Belt Sander Section II Parts and Service Manual (0255B-DE) U.S. Patent No. 5,55,0 and No. 6,58,858 Clarke American Sanders FloorCrafter Bedienungshandbuch Page 2 FloorCrafter Main Assembly
More informationParts Manual Zero Turn Mower / Z
Parts Manual Zero Turn Mower / Z 246 967271501-00 Please read the operator manual carefully and make sure you understand the instructions before using the machine. When you need spare parts or support
More informationParts Catalog. S-Series Slicer Standard Automatic Frozen Option S13A. Model:
, 07 995 ECN 077 Parts Catalog SA S-Series Slicer Standard Automatic Frozen Option Model: SA 05/08/07 Rev. H IMPORTANT! TO EXPEDITE SHIPMENT OF PARTS, ALWAYS SPECIFY MODEL, REV, PART NUMBER, AND SERIAL
More informationPARTS LIST WRANGLER 26-VS
PARTS LIST WRANGLER 26-VS ELECTRICAL WIRING ITEM PART NO. DESCRIPTION QTY. 1 2694161 UPPER WIRING HARNESS 1 2 2694171 LOWER WIRING HARNESS 1 3 2490811 BRUSH MOTOR WIRE ASSEMBLY 1 4 2396141 WIRE ASSEMBLY
More informationWRANGLER 1708CE, 2008CE
WRANGLER 1708CE, 2008CE CONTROL PANEL ASSEMBLY ITEM PART NO. DESCRIPTION QTY. 101 5490161 FULLY INSULATED FEMALE TERMINAL 14-16 2 102 0693141 RUBBER SWITCH BOOT 2 103 0691851 1/2 INTERNAL STAR LOCK WASHER
More informationEC52FX730VCA EC60FX730V3 EC60FX730VCA EC52FX730V5 EC60FX801V5 EC60FX801VCA
PARTS MANUAL EC52FX730V3 EC52FX730VCA EC60FX730V3 EC60FX730VCA EC52FX730V5 EC60FX801V5 EC60FX801VCA 2 2415 ASHLAND AVE BEATRICE, NE 68310 800-267-4255 FAX 402-223-4103 3 Contents CASTER ASSEMBLY... 5 FRAME
More information