PRO SERIES II PSAB ABDOMINAL CRUNCH. Customer Support Services PARTS MANUAL. 1Page 1 of 9
|
|
- Brian Roberts
- 5 years ago
- Views:
Transcription
1 PRO SERIES II CRUNCH Customer Support Services PARTS MANUAL 1Page 1 of 9
2 CRUNCH Notes: Page of 9
3 CRUNCH Contents PAGE COMPONENT ASSEMBLY...4 MAIN FRAME ASSEMBLY...5 SIDE FRAME ASSEMBLY...6 ADJUSTABLE SEAT ASSEMBLY...7 ADD-ON INCREMENT WEIGHT...8 WEIGHT STACK 00LB...9 3Page 3 of 9
4 CRUNCH COMPONENT ASSEMBLY ITEM NO. QTY. PART NO. DESCRIPTION ASSY, PSAB MAIN FRAME ASSY, PSAB ADJ. SEAT ASSY, PSAB SIDE FRM ASSY, ROLLER PAD - SHORT ASSY, PSAB WORKARM SCREW, M10 X1.5 75MM WASHER, 3/8 SAE SS NUT, M10 HEX NYLOCK SS SCREW, M10 X MM SCREW, M10 X1.5 35MM CABLE, PSAB SCREW, M10 X1.5 5MM PLATE, 1.97 OD X.44 ID 10GA NUT, SPIDER M10 X SHAFT COLLAR, 1-1/" ID ALUM CAP, BEARING HOUSING CAP, END 1-1/ X SLEEVE, ACCRDN 1.0 ID NUT, M16 X HEX JAM SS PAD, 17 X 18 1/ PAD. 7 X 11-1/ PAD, AB CHEST 4Page 4 of 9
5 CRUNCH MAIN FRAME ASSEMBLY ITEM NO.QTY. PART NO.DESCRIPTION WELDMENT, PSAB MAIN CAP, END X ASSY, PILLOW BLOCK 4.88 X WASHER, 3/8 SAE SS SCREW, M10 X1.5 80MM NUT, M10 HEX NYLOCK SS LABEL, SEAT ADJUST 5Page 5 of 9
6 CRUNCH SIDE FRAME ASSEMBLY ITEM NO. QTY. PART NO. DESCRIPTION WELDMENT, PSAB STACK COVER, STACK STD WASHER, SPACER NUT, M10 X 1.5 SOCKET HEAD SCREW, M10 X1.5 45MM CAP, END X PULLEY, 4.5" OD SCREW, M10 X1.5 55MM WASHER, 3/8 SAE SS NUT, M10 X 1.5 JAM PLUG, 7/16" HOLE ASSY, 00LB STACK CUSHION, WEIGHT STACK GUIDE ROD,.75 OD SOLID RETAINER, GUIDEROD RING, BRE.940, ST PP B M10 X 1.5 HXS NO CUP ST BO PAD, DUAL LOC 400, 1" X 1" LABEL, PSAB LOGO PANEL LABEL, PSAB PLACARD LABEL, " ASTM WARN LABEL, LIFE FITNESS LOGO LABEL, SERIAL NO LABEL, MOVING PARTS NUT, BLIND INSERT M10 X Footpad, PS Rubber 6Page 6 of 9
7 CRUNCH ADJUSTABLE SEAT ASSEMBLY ITEM NO. QTY. PART NO. DESCRIPTION WELDMENT, PSAB ADJ. SEAT ASSY, SEAT ROLLER SCREW, M10 X MM WASHER, 3/8 SAE SS NUT, M10 HEX NYLOCK SS WLDMT, PSAB PNTD SEAT HANDLE SPRNG, PRO HANDLE TORSION SEATRACK, ROLLER SERRATED SEATRACK, FLAT M10x1.5x110mm SCREW, M10 X MM CAP, END X CAP, END 1-1/ X PLUG, 7/16" HOLE CAP, 1/ X 5/ STOP, ROLLER SEAT GRIP, SHADOW GRAY, 1.5" STOP, AB ROLLER SEAT 7Page 7 of 9
8 CRUNCH ADD-ON INCREMENT WT ASSY ITEM NO.QTY. PART NO.DESCRIPTION WASHER, 3/8 SAE SS SCREW, M10 X MM COVER, PLASTIC PEG -1/ WEIGHT, 7.5 LB. ADD-ON 8Page 8 of 9
9 PSLE LEG EXTENSION WEIGHT STACK ASSY 00LB ITEM NO.QTY.PART NO. DESCRIPTION HEADPLATE, WT. STACK BAYONET, 14 PLATE BUSHING, HEADPLATE BUSHING, SPRING PIN ASSY, SELECTOR PIN PLUG, LANYARD ATTACHMENT ASSY, 10 LB PLATE ASSY, 15 LB PLATE CRIMP, CABLE 9Page 9 of 9
10 PRO SERIES Page 1 Customer Support Services PARTS MANUAL
11 CONTENTS Page COMPONENT ASSEMBLY 3 COMPONENT ASSEMBLY LEGEND 4 MAIN FRAME 5 MAIN FRAME ASSEMBLY LEGEND 6 SIDE FRAME ASSEMBLY 7 SIDE FRAME ASSEMBLY LEGEND 8 WORK ARM ASSEMBLY 9 WORK ARM ASSEMBLY LEGEND 10 ADJUSTABLE SEAT ASSEMBLY 11 ADJUSTABLE SEAT ASSEMBLY LEGEND 1 ADD-ON INCREMENT WEIGHT ASSEMBLY 13 WEIGHT STACK (00LB) 14 OPTIONAL REAR SHROUD KIT 15 Page
12 COMPONENT ASSEMBLY SEE PAGE 4 FOR LEGEND Page 3
13 COMPONENT ASSEMBLY LEGEND ITEM NO. QTY. PART NO. DESCRIPTION ASSY, PSAB MAIN FRAME ASSY, PSAB ADJ. SEAT ASSY, PSAB SIDE FRM ASSY, ROLLER PAD - SHORT ASSY, PSAB WORKARM SCREW, M10 X1.5 75MM WASHER, 3/8 SAE SS NUT, M10 HEX NYLOCK SS SCREW, M10 X MM SCREW, M10 X1.5 35MM WASHER, 3/8 ID X 1.5 OD SS CABLE, PSAB PLATE, 1.97 OD X.44 ID 10GA NUT, SPIDER M10 X SHAFT COLLAR, 1-1/" ID ALUM CAP, BEARING HOUSING CAP, END 1-1/ X SLEEVE, ACCRDN 1.0 ID X NUT, M16 X HEX JAM SS xx PAD, 17 X 18 1/ xx PAD. 7 X 11-1/4 1 74xx PAD, AB CHEST SPRING, GAS 150N STUD, M10 BALL END M10 X CAP, END X 3 Page 4
14 MAIN FRAME ASSEMBLY SEE PAGE 6 FOR LEGEND Page 5
15 MAIN FRAME ASSEMBLY LEGEND ITEM NO. QTY. PART NO. DESCRIPTION WELDMENT, PSAB MAIN CAP, END X ASSY, PILLOW BLOCK 4.88 X WASHER, 3/8 ID X 1.5 OD SS SCREW, M10 X1.5 75MM NUT, M10 HEX NYLOCK SS FOOTPAD, PS RUBBER Page 6
16 SIDE FRAME ASSEMBLY SEE PAGE 8 FOR LEGEND Page 7
17 SIDE FRAME ASSEMBLY LEGEND ITEM NO. QTY. PART NO. DESCRIPTION WELDMENT, PSAB STACK COVER, STACK-PRO STD WASHER, SPACER NUT, M10 X 1.5 SOCKET HEAD SCREW, M10 X1.5 45MM CAP, END X PULLEY, 4.5" OD WASHER, 3/8 SAE SS NUT, M10 X 1.5 JAM PLUG, 7/16" HOLE ASSY, 00LB STACK CUSHION, WEIGHT STACK GUIDE ROD,.75 OD SOLID RETAINER, GUIDEROD RING, BRE.940, ST PP B M10 X 1.5 HXS NO CUP ST BO PAD, DUAL LOCK " X.0" LABEL, PSAB LOGO PANEL LABEL, PSAB PLACARD LABEL, " ASTM WARN LABEL, LIFE FITNESS LOGO LABEL, SERIAL NUMBER LABEL, MOVING PARTS NUT, BLIND INSERT M10 X FOOTPAD, PS RUBBER Page 8
18 WORK ARM ASSEMBLY SEE PAGE 10 FOR LEGEND Page 9
19 WORK ARM ASSEMBLY LEGEND ITEM NO. QTY. PART NO. DESCRIPTION WELDMENT, PSAB WORKARM " ID 1.5" OD BRONZ BUSHING WELDMENT, PSAB CAM PIN, PULL X SPRING; PULL PIN LARGE KNOB, TULIP STYLE HOLE SELECTOR PLATE PLATE, SLOT STOP NUT, M10 HEX NYLOCK SS WASHER, 3/8 SAE SS SCREW, M10 X1.5 45MM WEIGHT, COUNTER LG BUMPER, -1/8 X 4-5/ SCREW, M10 X1.5 80MM CAP, END 1-1/ X CAP, END X SCREW, M10 X1.5 30MM CAP, GRIP 1.5 OD RING, GRIP 1.5 OD GRIP, 1.5 OD OPEN END LABEL, MOVING PARTS RETAINER, CM/MJ, PULLEY SCREW, M10 X1.5 50MM Page 10
20 ADJUSTABLE SEAT ASSEMBLY SEE PAGE 1 FOR LEGEND Page 11
21 ADJUSTABLE SEAT ASSEMBLY LEGEND ITEM NO. QTY. PART NO. DESCRIPTION WELDMENT, PSAB ADJ. SEAT ASSY, SEAT ROLLER SCREW, M10 X MM WASHER, 3/8 SAE SS NUT, M10 HEX NYLOCK SS WLDMT, MTS/PS, SEAT HANDLE SPRNG, PRO HANDLE TORSION SEATRACK, ROLLER SERRATED SEATRACK, FLAT M10x1.5x110mm SCREW, M10 X MM CAP, END X CAP, END 1-1/ X PLUG, 7/16" HOLE CAP, 1/ X STOP, ROLLER SEAT GRIP, SHADOW GRAY, 1.5" STOP, AB ROLLER SEAT LABEL, SEAT INST LABEL, SEAT ADJUST WASHER, 3/8 ID X 1.5 OD SS Page 1
22 ADD-ON INCREMENT WEIGHT ASSEMBLY ITEM NO. QTY. PART NO. DESCRIPTION WASHER, 3/8 SAE SS SCREW, M10 X MM COVER, PLASTIC PEG -1/ WEIGHT, 7.5 LB. ADD-ON Page 13
23 WEIGHT STACK ASSY 00LB WEIGHT STACK LABELS PART NO DESCRIPTION LABEL, 00 LB STACK LABEL, 95 KG STACK ITEM NO QTY PART NO DESCRIPTION HEADPLATE, WT. STACK BAYONET, 14 PLATE 3 / HEADPLATE BUSHING & CLIP BUSHING, SPRING PIN ASSY, SELECTOR PIN PLUG, LANYARD ATTACHMENT ASSY, 10 LB PLATE ASSY, 15 LB PLATE CRIMP, CABLE Page 14
24 OPTIONAL REAR SHROUD KIT STD-SHORT ITEM NO QTY PART NO DESCRIPTION SHIELD, PS REAR BRACKET, PS REAR SHIELD WASHER, 3/8 SAE SS SCREW, M10 X1.5 0MM Page 15
PRO 2 SERIES PSBCSE BICEPS CURL
PRO SERIES PSBCSE BICEPS CURL Customer Support Services PARTS MANUAL CONTENTS Page COMPONENT ASSEMBLY COMPONENT ASSEMBLY LEGEND SIDE FRAME 5 SIDE FRAME ASSEMBLY LEGEND MOVEMENT ARM ASSEMBLY MOVEMENT ARM
More informationPRO 2 SERIES PSLCSE LEG CURL
PRO SERIES PSLCSE LEG CURL Page Customer Support Services PARTS MANUAL CONTENTS PAGE COMPONENT ASSEMBLY COMPONENT ASSEMBLY LEGEND SIDE FRAME ASSEMBLY 5 SIDE FRAME ASSEMBLY LEGEND 6 SEAT FRAME ASSEMBLY
More informationPRO 2 SERIES PSFLYSE PECTORAL FLY/REAR DELTOID
PRO SERIES PSFLYSE PECTORAL FLY/REAR DELTOID Page Customer Support Services PARTS MANUAL CONTENTS Page COMPONENT ASSEMBLY COMPONENT ASSEMBLY LEGEND STACK FRAME ASSEMBLY STACK FRAME ASSEMBLY LEGEND RIGHT
More informationPRO 2 SERIES PSSLPSE SEATED LEG PRESS. Customer Support Services PARTS MANUAL
PRO SERIES PSSLPSE SEATED LEG PRESS Customer Support Services PARTS MANUAL CONTENTS Page COMPONENT ASSEMBLY COMPONENT ASSEMBLY LEGEND SIDE FRAME ASSEMBLY 5 SIDE FRAME ASSEMBLY LEGEND BASE FRAME ASSEMBLY
More informationPRO 2 SERIES PSADCSE ASSISTED DIP CHIN
PRO SERIES PSADCSE ASSISTED DIP CHIN Customer Support Services PARTS MANUAL CONTENTS Page COMPONENT ASSEMBLY COMPONENT ASSEMBLY LEGEND STACK FRAME ASSEMBLY 5 STACK FRAME ASSEMBLY LEGEND 6 SIDE FRAME ASSEMBLY
More informationSIGNATURE SERIES FZAB ABDOMINAL. Customer Support Services PARTS LIST. Page 1
SIGNATURE SERIES FZAB ABDOMINAL Page 1 Customer Support Services PARTS LIST Contents PAGE COMPONENT ASSEMBLY 3 COMPONENT ASSEMBLY II 4 COMPONENT ASSEMBLY LEGEND 5 FZ SEAT CARRIAGE ASSEMBLY 6 FZAB ADJUSTER
More informationCABLE MOTION SERIES MJLPD MULTI JUNGLE DUAL PULLEY PULLDOWN. Customer Support Services PARTS LIST. Page 1
CABLE MOTION SERIES MJLPD MULTI JUNGLE DUAL PULLEY PULLDOWN Page Customer Support Services PARTS LIST CONTENTS PAGE MJCORE ASSEMBLY COMPONENT ASSEMBLY COMPONENT ASSEMBLY LEGEND MJ CORE CONNECTING HARDWARE
More informationCABLE MOTION SERIES MJFCO MULTI JUNGLE FIXED CROSSOVER. Customer Support Services PARTS LIST. Page 1
CABLE MOTION SERIES MJFCO MULTI JUNGLE FIXED CROSSOVER Page Customer Support Services PARTS LIST Contents PAGE MJCORE ASSEMBLY COMPONENT ASSEMBLY 4 COMPONENT ASSEMBLY LEGEND 5 MJ X-BEAM ASSEMBLY 6 CM/MJACO
More informationSIGNATURE SERIES FZPD PULL DOWN
SIGNATURE SERIES FZPD PULL DOWN Page Customer Support Services PARTS MANUAL CONTENTS PAGE COMPONENT ASSEMBLY COMPONENT ASSEMBLY II 4 COMPONENT ASSEMBLY LEGEND SEAT CARRIAGE ASSEMBLY SEAT CARRIAGE ASSEMBLY
More informationSignature Series Cable Motion CMCC Cable Crossover SERIAL NUMBER CMCC & UP. CUSTOMER SUPPORT SERVICES Parts List
Signature Series Cable Motion CMCC Cable Crossover SERIAL NUMBER CMCC090800 & UP CUSTOMER SUPPORT SERVICES Parts List CONTENTS PAGE COMPONENT ASSEMBLY COMPONENT ASSEMBLY LEGEND CMCC FRAME ASSEMBLY CMCC
More informationCABLE MOTION SERIES MJACO MULTI JUNGLE ADJUSTABLE CROSSOVER. Customer Support Services PARTS LIST. Page 1
CABLE MOTION SERIES MJACO MULTI JUNGLE ADJUSTABLE CROSSOVER Page Customer Support Services PARTS LIST Contents Page MJCORE ASSEMBLY COMPONENTS ASSEMBLY COMPONENTS ASSEMBLY LEGEND MJ X BEAM ASSEMBLY 6 CM/MJACO
More informationSignature Series Multi-Jungle MJACO Adjustable Crossover SERIAL NUMBER: MJ & UP MJ & UP MJ12S & UP MJ12V & UP
Signature Series Multi-Jungle MJACO Adjustable Crossover SERIAL NUMBER: MJ0006 & UP MJ00007 & UP MJS0000 & UP MJV0000 & UP CUSTOMER SUPPORT SERVICES Parts List CONTENTS Page MJCORE ASSEMBLY COMPONENTS
More informationSignature Series Single Station Lat Raise
Signature Series Single Station Lat Raise FZLR Parts List 8//0 CONTENTS FRAME AND UPHOLSTERY COLORS.. SHROUD OPTIONS. 4 COMPONENT ASSEMBLY.. 5 COMPONENT ASSEMBLY II. 6 COMPONENT ASSEMBLY LEGEND.. 7 FZ
More informationSignature Series Single Station Leg Extension FZLE. Parts List
Signature Series Single Station Leg Extension FZLE Parts List 9/6/0 CONTENTS FRAME AND UPHOLSTERY COLORS.. SHROUD OPTIONS. 4 COMPONENT ASSEMBLY.. 5 COMPONENT ASSEMBLY II. 6 COMPONENT ASSEMBLY LEGEND..
More informationSIGNATURE SERIES CABLE MOTION DUAL ADJUSTABLE PULLEY CMDAP PARTS MANUAL
SIGNATURE SERIES CABLE MOTION DUAL ADJUSTABLE PULLEY CMDAP PARTS MANUAL /0/0 CONTENTS SERIAL NUMBER CMDAP000 - CURRENT UNITS WITH DROP-DOWN INCREMENTAL WEIGHTS PAGE FRAME AND UPHOLSTERY COLORS PAINTED
More informationSignature Series Single Station Triceps Press
Signature Series Single Station Triceps Press FZTP Parts List 8//0 CONTENTS FRAME AND UPHOLSTERY COLORS. SHROUD OPTIONS.. 4 COMPONENT ASSEMBLY. 5 COMPONENT ASSEMBLY II 6 COMPONENT ASSEMBLY LEGEND. 7 SEAT
More informationSignature Series Single Station Seated Leg Press FZSLP. Parts List
Signature Series Single Station Seated Leg Press FZSLP Parts List 7/5/0 CONTENTS FRAME AND UPHOLSTERY COLORS.. SHROUD OPTIONS. 4 COMPONENT ASSEMBLY.. 5 COMPONENT ASSEMBLY II. 6 COMPONENT ASSEMBLY LEGEND..
More informationOptima Series OSLR Lat Pulldown/Low Row
Optima Series OSLR Lat Pulldown/Low Row OSLR CUSTOMER SUPPORT SERVICES Parts List 8/7/04 CONTENTS FRAME AND UPHOLSTERY COLORS... COMPONENT ASSEMBLY... 4 FRAME BOX ASSEMBLY... 5 FRAME BOX ASSEMBLY LEGEND...
More informationSignature Series Single Station Glute
Signature Series Single Station Glute FZGL Parts List 5/7/0 CONTENTS FRAME AND UPHOLSTERY COLORS.. SHROUD OPTIONS. 4 COMPONENT ASSEMBLY 5 COMPONENT ASSEMBLY II. 6 COMPONENT ASSEMBLY LEGEND 7 MID-9 TOWER
More informationSignature Series Single Station Pectoral Fly FZPEC. Parts List
Signature Series Single Station Pectoral Fly FZPEC Parts List 8//0 CONTENTS FRAME AND UPHOLSTERY COLORS OPTIONAL SHROUDS 4 COMPONENT ASSEMBLY 5 COMPONENT ASSEMBLY II.. 6 COMPONENT ASSEMBLY LEGEND 7 SEAT
More informationSignature Series Single Station Torso Rotation
Signature Series Single Station Torso Rotation FZTR Parts List 9//0 CONTENTS FRAME AND UPHOLSTERY COLORS SHROUD OPTIONS.. 4 COMPONENT ASSEMBLY 5 COMPONENT ASSEMBLY II.. 6 COMPONENT ASSEMBLY LEGEND 7 MID-9
More informationSignature Series Single Station Seated Leg Press FZSLP. Parts List
Signature Series Single Station Seated Leg Press FZSLP Parts List /8/0 CONTENTS FRAME AND UPHOLSTERY COLORS.. SHROUD OPTIONS. 4 COMPONENT ASSEMBLY.. 5 COMPONENT ASSEMBLY II. 6 COMPONENT ASSEMBLY LEGEND..
More informationSignature Series Multi-Jungle Dual Pulley Row
Signature Series Multi-Jungle Dual Pulley Row MJRWD Parts List /06/202 CONTENTS FRAME AND UPHOLSTERY COLORS.. MJCORE ASSEMBLY.. 4 COMPONENT ASSEMBLY.. 5 COMPONENT ASSEMBLY LEGEND.. 6 BOOM ASSEMBLY.. 7
More informationINSIGNIA SERIES PULLDOWN SS-PD PARTS MANUAL
INSIGNIA SERIES PULLDOWN SS-PD PARTS MANUAL //0 Contents Options and Key... Powder Coat Painted Frame Weldments... Component Assembly... Labels... Table... Seat Assembly... Tower Plastics... Shroud Wraps...
More informationINSIGNIA SERIES GLUTE SS-GL PARTS MANUAL
INSIGNIA SERIES GLUTE SS-GL PARTS MANUAL //0 Contents Options and Key... Powder Coat Painted Frame Weldments... Component Assembly... Chest Support Components... Labels... Table... Tower Plastics... Shroud
More informationMTS - MOTION TECHNOLOGY SELECTORIZED MTTE TRICEPS EXTENSION. Customer Support Services PARTS MANUAL. 1Page 1 of 18
MTS - MOTION TECHNOLOGY SELECTORIZED MTTE TRICEPS EXTENSION Customer Support Services PARTS MANUAL 1Page 1 of 18 Notes: 2Page 2 of 18 Contents PAGE COMPONENT ASSEMBLY...4 LEFT MOVEMENT ARM...5 RIGHT MOVEMENT
More informationSignature Series Multi-Jungle Row
Signature Series Multi-Jungle Row MJRW Parts List /0/0 CONTENTS AND UPHOLSTERY S 3 MJCORE ASSEMBLY COMPONENT ASSEMBLY COMPONENT ASSEMBLY LEGEND MJRW BOOM ASSEMBLY. MJRW BENCH ASSEMBLY 8 MJRW BENCH ASSEMBLY
More informationInsignia Series Seated Leg Press Contents
INSIGNIA SERIES SEATED LEG PRESS SS-SLP PARTS MANUAL //0 Contents Options and Key... Powder Coat Painted Frame Weldments... Component Assembly... Carriage Components... Labels... Table... Lower Cam Assembly...
More informationInsignia Series Torso Rotation Contents
INSIGNIA SERIES TORSO ROTATION SS-TR PARTS MANUAL //0 Contents Options and Key... Powder Coat Painted Frame Weldments... Component Assembly... Table... Seat Assembly... Tower Plastics... Shroud Wraps...
More informationInsignia Series Row Contents
INSIGNIA SERIES ROW SS-RW PARTS MANUAL //0 Contents Options and Key... Powder Coat Painted Frame Weldments... Component Assembly... Main Frame Assembly... Labels... Table... Seat Assembly... Tower Plastics...
More informationINSIGNIA SERIES ABDOMINAL SS-AB PARTS MANUAL
INSIGNIA SERIES ABDOMINAL SS-AB PARTS MANUAL //0 Contents Options and Key... Powder Coat Painted Frame Weldments... Component Assembly... Table... Seat Assembly... Tower Plastics... Shroud Wraps... Weight
More informationOptima Series OSDAP Dual Adjustable Pulley OSDAP. CUSTOMER SUPPORT SERVICES Parts List
Optima Series OSDAP Dual Adjustable Pulley OSDAP CUSTOMER SUPPORT SERVICES Parts List 6/0/0 CONTENTS AND UPHOLSTERY S COMPONENT ASSEMBLY COMPONENT ASSEMBLY LEGEND.. CHIN UP ASSEMBLY. 6 LEFT CARRIAGE ASSEMBLY..
More informationCLUB SERIES LEG EXTENSION
CLUB SERIES LEG EXTENSION ASSEMBLY INSTRUCTIONS Part # 7580 Rev B. Revision: 0//0 PARTS LIST KEY 3 5 6 7 8 0 3 5 6 7 8 0 PART # DESCRIPTION 657xx TOWER 650xx PIVOT ARM SUPPORT 650xx HANDLE 666xx PIVOT
More informationCLUB SERIES GLUTE MACHINE
CLUB SERIES GLUTE MACHINE ASSEMBLY INSTRUCTIONS Part # 7109801 Rev D. 1 Revision:11/12/01 PARTS LIST KEY PART # DESCRIPTION QTY KEY PART # DESCRIPTION QTY 1 71086xx TOWER 1 11 3102901 3/8 X 1-1/4 BOLT
More informationS5LATP LAT PULLDOWN. Last Rev Date: 12/16/10. Nautilus Nitro Plus. Parts List Nitro Plus/QTY. Nitro Plus/QTY. Number
Number Nitro Plus/QTY. 0-00 5 ½ -3 UNC x 3 Bolt 0-05 3/8-6 UNC x ½ Bolt 0-5 3/8-6 UNC x ¾ Bolt 0-90 5/8- UNC x Bolt 0-553 3 3/8-6 UNC x ½ Bolt 0-56 ½ -3 UNC x Bolt 0-56 ½ -3 UNC x 3¾ Bolt 0-56 3 ½ -3 UNC
More informationEVO S9PO S9PO REV M. Red: PAINTED ITEMS Blue: KITS.
Number /QTY. DESCRIPTION 01-1115 2 3/8-16 UNC x 2½ Bolt 01-1258 6 ½ -13 UNC x ¾ Bolt 01-1524 1 5/8-11 UNC x 8 Bolt 01-1552 3 3/8-16 UNC x 4 Bolt 01-1554 1 3/8-16 UNC x 5 Bolt 01-1564 3 ½ -13 UNC x 4½ Bolt
More informationHIGH/LOW PULLEY OWNER'S MANUAL
TM HIGH/LOW PULLEY OWNER'S MANUAL REVISED: Nov. 10,199 10 10 SERIAL NO.'S through 1 116 11 Contents Parts Manual 1 BOOM ASSEMBLY 2 REVISION 1 BOOM ASSEMBLY WORKBOX & MOVEMENT ARM TO BASE ASSEMBLY BASE
More informationOSSM SMITH MACHINE CONTENTS
Optima Series OSSM Smith Machine OSSM CUSTOMER SUPPORT SERVICES Parts List /8/04 CONTENTS AND UPHOLSTERY S COMPONENT ASSEMBLY 4 LEFT BOX ASSEMBLY. 5 LEFT BOX ASSEMBLY LEGEND. 6 RIGHT BOX ASSEMBLY 7 LEFT
More informationEVO Rear Delt - Pec Fly
. All labeled components are to be assembled Med-Fit Systems, Inc. 800/ 83-7665 Number DESCRIPTION 0-003 5/6-8 UNC x 5½ Bolt 0-5 2 3/8-6 UNC x 2½ Bolt 0-85 2 3/8-6 UNC x 3½ Bolt 0-27 2 ½ -3 UNC x ¼ Bolt
More informationCLUB SERIES HIP AB/ADDUCTOR
CLUB SERIES HIP AB/ADDUCTOR ASSEMBLY INSTRUCTIONS Part # 718601 Rev E 1 Revision: 1/2/03 KEY PART # DESCRIPTION QTY KEY PART # DESCRIPTION QT Y 1 71710xx TOWER 1 22 3102915 3/8 X 3-1/ BOLT 2 1A 6692601
More informationLEG EXTENSION OWNER'S MANUAL
TM LEG EXTENSION OWNER'S MANUAL REVISED: Sept. 2,1998 90 98 19 10 P 110 9 50,52A 150 SERIAL NO.'S through 109 1 2 5 6 8 Contents Parts Manual SEAT FRAME / CROSSMEMBER ASSEMBLY SEAT FRAME ASSEMBLY WORKBOX
More informationF3CC-E CABLE CROSSOVER. Freeweight. Parts Diagram. Blue: KITS Red: PAINTED ITEMS.
F3AT-E TOWER BOM (Quantities shown in table below are for (1) Tower. Actual quantity per machine is double.) PART NO. F3AT-E/QTY. DESCRIPTION 01-0011 2 ½ -13 UNC x 3 Bolt 01-1331 2 ½ -13 UNC x 2¾ Bolt
More informationPRONE LEG CURL OWNER'S MANUAL
TM TM 97 105 19 1 1 73 PRONE LEG CURL OWNER'S MANUAL REVISED: May 15,1998 119 51 SERIAL NO.'S through Contents Parts Manual 1 3 4 5 6 7 8 SEAT FRAME ASSEMBLY WORKBOX & CROSSMEMBER ASSEMBLY MOVEMENT ARM
More informationF3 Dual Tower Trainer F3DTT
F3AT TOWER BOM (Quantities shown in table on the left are for (1) Tower. Actual quantity per machine is double.) PART NO. QTY. DESCRIPTION 01-0011 2 ½ -13 UNC x 3 Bolt 01-0020 1 7/16-14 UNC x 5 Bolt 01-1331
More informationVectra On-Line 1650 Part Numbers and Prices Page 1
Part Numbers and Prices Page 1 69020 Ab Crunch Strap 57900 Access Door (painted) 2.5AO Add-on plate- 2.5 pound 5.0AO Add-on plate- 5 pound 60760 Adjustable Pulley assembly (main column) 52710 Bar- stack
More informationNITRO PLUS ROTARY TORSO S5RT REV J
Red: PAINTED ITEMS Blue: KITS 1. All labeled components are to be assembled before shipment unless otherwise noted. 2. All bearings are to be pressed in with force applied to outer ring only. 3. All hardware
More informationLIFE FITNESS HAMMER STRENGTH EQUIPMENT PLLL-Plate Loaded Linear Leg Press - Main Assembly
PLLL-Plate Loaded Linear Leg Press - Main Assembly Carriage Assembly Carriage Weldment Top Stop Adjusting Handle Weldment Back Frame Assembly Bottom Stop Weldment Back Frame Weldment Center Frame Assembly
More informationSerial Number: Date of Purchase:
Congratulations on the purchase of your Ground Logic, Inc. machine. This product has been carefully designed and manufactured to be a dependable piece of equipment that will provide years of trouble-free
More informationVectra On-Line 1270 Part Numbers and Prices Page 1
Part Numbers and Prices Page 1 57900 Access Door (painted) 20160 Access Door- notched, used at base of main column 2.5AO Add-on plate- 2.5 pound 5.0AO Add-on plate- 5 pound 14200 Adjustable Pulley assembly-
More informationVectra On-Line 1500 Part Numbers and Prices Page 1 Vectra On-Line 1500 Part # Part Description 69020 Ab Crunch Strap 29010 Ab Swivel Pulley assembly 28100 Ab Swivel Pulley bracket- without pulley & hardware
More informationBulb Number Part Number Description BLOCK, STOP
Bulb Number Part Number Description 1 11000-384 BLOCK, STOP 2 11040-301 CLAMP BLOCK INSERT 6 12000-307 PIN, PIVOT 7 12000-337 SHAFT, PIVOT, 12.75 11 12000-345 FOOT PAD, 4.00 x 7.00 19 12000-398 SPACER
More informationPEC FLY OWNER'S MANUAL SERIAL NO.'S. through. Parts Manual. Maintenance Manual Follows page REVISED: Nov. 07,1998.
TM TM 15,22 16,23 157,159A 28 PEC FLY OWNER'S MANUAL 17,24 30 REVISED: Nov. 07,1998 29 SERIAL NO.'S through 33 33 Contents Parts Manual 1 2 3 4 5 6 7 8 9 FRAME & PAD ASSEMBLY WORKBOX TO FRAME ASSEMBLY
More informationOWNER'S MANUAL HIP EXTENSION SERIAL NO.'S. through. Parts Manual. Maintenance Manual Follows page REVISED: July 14,1998.
TM 90,91 97 110,112A HIP EXTENSION OWNER'S MANUAL 92 98 76 78 79 77 REVISED: July 14,1998 SERIAL NO.'S through Contents Parts Manual 1 2 3 4 5 6 7 8 BENCH FRAME ASSEMBLY CROSSMEMBER & WORKBOX ASSEMBLY
More informationBulb Number Part Number Description SPACER
Bulb Number Part Number Description 12 12000-398 SPACER 24 12060-200 MAIN FRAME 38 12090-322 FOOT PAD 52 CM000211 DECAL, PATENT PENDING 57 GB000202 BELT.95 WIDE, SEE DRAWING FOR LENGTH 58 GP000209 PULLEY
More informationParts Manual for the Wright Z
Parts Manual for the Wright Z Serial numbers 40581 & Higher Check www.wrightmfg.com for the latest revision Rev 6/2010 Shown with OPTIONAL Grass Collection System 2010 Wright Manufacturing Inc., All Rights
More informationSCROLL SAW SS-10 PART NO DATE:
40-680 20 SCROLL SAW SS-10 PART NO. 1342406 DATE: 06-09-04 Page1/ SS-10/DEB REPLACEMENT PARTS 1 n 901-02-050-5634 6-32 X 1/2" ROUND HD SCREW 2 1342281 WEDGE 3 1342285 UPPER BRACKET 4 1342261 BUSHING 5
More informationREPLACEMENT PARTS WEIGHT DISTRIBUTION SYSTEM SWAY CONTROL FIFTH WHEEL HITCHES REPLACEMENT PARTS
WEIGHT DISTRIBUTION SYSTEM Reese SC Weight Distributing Heavy Duty Trunnion Bar Weight Distributing Heavy Duty Round Bar Weight Distributing Steadi-Flex Light Duty Weight Distributing Heavy Duty Trunnion
More informationCW619KAS P/N: CW SUBREV: C DRAWN BY: VLE DATE: SHEET 1 OF 5
GUIDE RODS/WEIGHTS, SHEET 5 CAM/LEG ADJUSTMENT, SHEET 4 THIGH PAD, SHEET 3 FRAME/COMPONENTS, SHEET 2 DRAWN BY: VLE DATE: 11.11.09 SHEET 1 OF 5 85 84 71 62 45 56 63 36 23 75 24 21 351 22 352 353 350 25.01-25.03
More informationF3 Adjustable Tower Dual Stack Medical (With EVO Stack) F3ATM-E REV A
F3AT TOWER BOM (Quantities shown in table below are for (1) Tower. Actual quantity per machine is double.) PART NO. (EVO STACK)/QTY. DESCRIPTION 01-0011 2 ½ -13 UNC x 3 Bolt 01-1331 2 ½ -13 UNC x 2¾ Bolt
More informationSection B Detector September B
Section B Detector September 200 B Index No. Part No. Description. 2-0030-000 Link 2. 2-0208-000 Deck Hook Selector Assembly 3. 2-003-000 Spacer. -3000-000 Ball Bearing. 2-00-02 X-Washer Pin. 2-008-02
More informationSerial Number: Date of Purchase:
Congratulations on the purchase of your Ground Logic, Inc. machine. This product has been carefully designed and manufactured to be a dependable piece of equipment that will provide years of trouble-free
More informationWhen you need spare parts or support in service questions, warranty issues, etc., please consult the following professional: Engine
Parts Manual LZ5 / 968999 LZ30 / 9689996 Please read the operator s manual carefully and make sure you understand the instructions before using the machine. English D R O When you need spare parts or support
More informationTray Box Former. Parts List & Illustrations FIGURE 8-28A RAIL & FINGER ASSEMBLY AUTO LIDDER ~ = VARIABLE PART. W. E. Plemons Machinery Services, Inc.
FIGURE 8-28A RAIL & FINGER ASSEMBLY ITEM PART NO. DESCRIPTION QTY. 1 0032700 BAR, LID HOPPER GUIDE MT (34") 1 ~ 0032701 BAR, LID HOPPER GUIDE MT (42") 1 2 0061300 SUPPORT PAD, LIDDER 1 3 0033800 LEFT RAIL,
More informationASTRO ATS-12 TABBER PARTS MANUAL
ASTRO ATS-12 TABBER PARTS MANUAL This manual is intended solely for the use and information of Astro Machine Corp., its designated agents, customers, and their employees. The information in this guide
More informationParts Catalog. S-Series Slicer Standard Automatic Frozen Option S13A. Model:
, 07 995 ECN 077 Parts Catalog SA S-Series Slicer Standard Automatic Frozen Option Model: SA 05/08/07 Rev. H IMPORTANT! TO EXPEDITE SHIPMENT OF PARTS, ALWAYS SPECIFY MODEL, REV, PART NUMBER, AND SERIAL
More informationFloorCrafter Belt Sander
FloorCrafter Belt Sander Section II Parts and Service Manual (0255B-DE) U.S. Patent No. 5,55,0 and No. 6,58,858 Clarke American Sanders FloorCrafter Bedienungshandbuch Page 2 FloorCrafter Main Assembly
More informationFIT SERIES FIT-3 W/ LEG PRESS
FIT SERIES FIT-3 W/ LEG PRESS ASSEMBLY INSTRUCTIONS Part # 734820 Rev C. Revision:4/04/03 KEY 2 3 4 5 6 7 8 9 0 2 3 4 5 6 7 8 9 20 2 22 23 24 25 26 27 28 29 30 3 32 33 34 35 36 37 38 39 40 4 42 PART #
More informationHydrostatic Zero-Turn Commercial Riding Mower
Hydrostatic Zero-Turn Commercial Riding Mower Professional Turf Equipment 0" Fabricated Deck ILLUSTRATED PARTS LIST TABLE OF CONTENTS Frame Assembly.................................. 3 0" Fabricated Cutter
More information19 12A 12B 14E 11C 14A 11B 14D 14G 14H 14F FITNESS VFT-100 WITH SWIVELING DOUBLE PULLEYS
26 23 20 24 25 22 21 27 35 3 19 12A 17 1 12B 14E 11C 14A 11B 14D 14G 14H 14F 45 46 15 2 38-41 11M 13 16 18 6 11D 11A 7 8 4 11G-11L 11F 9 10 5 FITNESS VFT-100 WITH SWIVELING DOUBLE PULLEYS VFT100 PARTS
More informationPARTS LIST CHARGER 2020 AB CHARGER 2020 DB
PARTS LIST CHARGER 2020 AB CHARGER 2020 DB 1 ITEM PART NO. DESCRIPTION QTY. 101 6495511 CONTROL FRAME WELDMENT 1 102 9121390 11/32 I.D. X 11/16 O.D. X.051/.080 THICK SAE FLAT WASHER (5/16) 2 103 9121450
More informationParts Manual Rev. A
115 97 25-27 Rev. A Parts Manual Z 242F / 967 844702-00 Please read the operator manual carefully and make sure you understand the instructions before using the machine. Gasoline containing a maximum of
More informationBulb Number Part Number Description PIN, DETENT
Bulb Number Part Number Description 1 8229 PIN, DETENT 2 11040-440 KNOB 3 11040-443 DECAL, KNOB 5 12060-347 PIVOT PIN 9 16010-311 FOOT PAD 20 18020-202 W TOP FRONT CROSS TUBE 21 18020-203 W TOP REAR CROSS
More informationHydrostatic Zero-Turn Commercial Riding Mower
Hydrostatic Zero-Turn Commercial Riding Mower Professional Turf Equipment 54" Fabricated Deck ILLUSTRATED PARTS LIST TABLE OF CONTENTS Frame Assembly.................................. 3 54" Fabricated
More informationENCORE 52" X-TREME. 2-BAG GRASS CATCHER for units w/ S/N and above ASSEMBLY AND PARTS DIAGRAMS
ENCORE 52" X-TREME 2-BAG GRASS CATCHER for units w/ S/N 53138 and above ASSEMBLY AND PARTS DIAGRAMS Notes: ASSEMBLY INSTRUCTION Figure 1 Using 1/2" wrench, remove the discharge cover and the RH deck belt
More informationParts Catalog SLICING MACHINES
Parts Catalog Model 4600P SLICING MACHINES MODELS: 4600P, 4975P & 493 05-0-2 IMPORTANT! TO EXPEDITE SHIPMENT OF PARTS, ALWAYS SPECIFY MODEL, REV, PART NUMBER, AND SERIAL NUMBER OF SLICER. GLOBE FOOD EQUIPMENT
More informationPARTS LIST CHARGER 2716 DB PLUS
PARTS LIST CHARGER 2716 DB PLUS BASE ITEM PART NO. DESCRIPTION QTY. 101 6495511 CONTROL FRAME WELDMENT 1 102 9121390 11/32 I.D. X 11/16 O.D. X.051/.080 THICK SAE FLAT WASHER (5/16) 2 103 9121450 5/16-18
More informationVectra VX-38 Part Numbers and Price Page 1
Vectra Part Numbers and Price Page 1 69020 Ab Crunch Strap 58150 Ab Pulley assembly- with pulley 58140 Ab Pulley Bracket- without pulley 57900 Access Door (painted) 2.5AO Add-on plate- 2.5 pound 5.0AO
More informationMK-5000G exploded VieW
Frame accessories 38 cutting head Pump Assembly 39 connecting linkage foot pedal linkage 40 curtain blade guard 41 ENGINE Assembly 42 PARTS LIST A Frames - - A1 Frame, MK-5000 Main 1 155541 B Pivot Bracket
More informationZ-Force 60 KW 53AA5DBJ Page 1 of 57 Air Filter & Muffler
Z-Force 60 KW 53AA5DBJ Page 1 of 57 Air Filter & Muffler Z-Force 60 KW 53AA5DBJ Page 2 of 57 Air Filter & Muffler Ref # Part Number Qty S/P/F Description 11011 KM-11011-7003 1 S CASE-AIR FILTER 11013 KM-11013-7009
More informationNOTES: 1. THIS LABEL IS FURNISHED AS PART OF A LABEL KIT. ORDER REPLACEMENT LABEL KITS AS FOLLOWS:
NOTES: 1. THIS LABEL IS FURNISHED AS PART OF A LABEL KIT. ORDER REPLACEMENT LABEL KITS AS FOLLOWS: ENGLISH - BUBBLE #201 CHINESE - BUBBLE #202 FRENCH - BUBBLE #203 GERMAN - BUBBLE #204 JAPANESE - BUBBLE
More informationPARTS LIST CHARGER 2025 AB CHARGER 2025 DB
PARTS LIST CHARGER 2025 AB CHARGER 2025 DB 1 ITEM PART NO. DESCRIPTION QTY. 101 6495511 CONTROL FRAME WELDMENT 1 102 9121390 11/32 I.D. X 11/16 O.D. X.051/.080 THICK SAE FLAT WASHER (5/16) - PACK OF 10
More informationVectra On-Line 3800 Part Numbers and Prices Page 1 Vectra On-Line 3800 Part # Part Description 69020 Ab Crunch Strap 55850 Ab Pulley assembly- with pulley & hardware 54790 Ab Pulley Bracket- without pulley
More informationBulb Number Part Number Description Clamp Block Insert
Bulb Number Part Number Description 1 11040-301 Clamp Block Insert 4 11050-400 COUNTERWEIGHT (3.87) 11 12000-398 SPACER 13 12050-200 MAIN FRAME 17 12050-210 CAM 18 12050-211 STOP BRACKET 32 12090-322 FOOT
More informationParts Manual for the Wright Z
Parts Manual for the Wright Z Serial numbers 40581 & Higher Check www.wrightmfg.com for the latest revision Rev 9/2007 Shown with OPTIONAL Grass Collection System 2006 Wright Manufacturing Inc., All Rights
More informationParts Manual ZMKW 5222 / ZMKW 6124 /
Parts Manual ZMKW 222 / 6647801 ZMKW 6124 / 664701 Please read the operator s manual carefully and make sure you understand the instructions before using the machine. MODEL When you need spare parts or
More informationParts Manual Rev. A RZT48 /
115 91 36-2 Rev. A Parts Manual RZT48 / 96 62001-00 Please read the operator manual carefully and make sure you understand the instructions before using the machine. Gasoline containing a maximum of 10%
More informationVectra On-Line 1850 Part Numbers and Prices Page 1
Part Numbers and Prices Page 1 69020 Ab Crunch Strap 55850 Ab Pulley assembly- with pulley- TWO VERSIONS- Revised 9/20/02 54790 Ab Pulley Bracket- without pulley- TWO VERSIONS- Revised 9/20/02 57900 Access
More informationIllustrated Parts Manual
Illustrated Parts Manual 00 Series Snow Thrower Two Stage MTD LLC, P.O. BOX 331 CLEVELAND, OHIO 13-001 Printed In USA Form No. -033 (August 2, 200) Auger & Auger Housing 5 1 1 13 3 25 23 1 15 53 1 2 22
More informationParts Catalog. S-Series Slicer Automatic. Model:
, 07 99509 ECN 077 Parts Catalog S-Series Slicer Automatic Model: SGA SGA 05/08/07 Rev. J IMPORTANT! TO EXPEDITE SHIPMENT OF PARTS, ALWAYS SPECIFY MODEL, REV, PART NUMBER, AND SERIAL NUMBER OF UNIT. GLOBE
More informationParts Manual Zero Turn Mower / Z 248F
Parts Manual Zero Turn Mower / Z 248F 967262501-00 Please read the operator manual carefully and make sure you understand the instructions before using the machine. When you need spare parts or support
More informationParts List for The 36 & 42 Wright Stander Mower (For Serial Numbers and Higher Until Superseded)
Parts List for The & Wright Stander Mower (For Serial Numbers 00 and Higher Until Superseded) Replace with newer revisions as they become available 00 Wright Manufacturing, Inc. All rights reserved Revised:
More informationCraftsman Snow Thrower Model PARTS LIST
Craftsman Snow Thrower Model 24.881900 PARTS LIST 11 13 3 2 24 9 1 18 4 2 1 20 23 1 14 1 9 2 4 4 4 3 28 8 3 4 3 39 0 3 43 38 2 48 2 42 1 41 40 49 4 44 31 4 31 21 29 34 9 19 10 32 22 2 Craftsman Snow Thrower
More information136R616G190 Lawn Tractor FST-16 (1996) Page 1 of 27 42" Mowing Deck
136R616G190 Lawn Tractor FST-16 (1996) Page 1 of 27 42" Mowing Deck 136R616G190 Lawn Tractor FST-16 (1996) Page 2 of 27 42" Mowing Deck 3 97600A 1 S 42" Deck Ass'y. Code: N notates a new part (not previously
More informationParts Manual M-ZT52 /
Gasoline containing up to 10% ethanol (E10) is acceptable for use in this machine. The use of any gasoline exceeding 10% ethanol (E10) will void the product warranty. Parts Manual M-ZT52 / 961001 Please
More informationMODEL NUMBER ST230E PRODUCT NUMBER MFG. ID. NUMBER
ILLUSTRATED PARTS LIST MODEL NUMBER ST0E PRODUCT NUMBER 0000 MFG. ID. NUMBER 00-0 - AUGER HOUSING / IMPELLER ASSEMBLY SNOW THROWER - MODEL NO. ST0E (0000), PRODUCT NO. 00-0 0 0 (EXPLODED) 0.0.0-F NOTE:
More informationBulb Number Part Number Description PIN, DETENT
Bulb Number Part Number Description 2 8229 PIN, DETENT 4 11040-440 KNOB 17 11050-375 PIVOT PIN 18 11070-200 SEAT FRAME 22 11070-204 WEIGHT FRAME 24 11070-207 CUSHION TUBE 29 11090-369 SHAFT, PIVOT 30 11090-392
More informationWhen you need spare parts or support in service questions, warranty issues, etc., please consult the following professional: Engine
Parts Manual LZ5 / 968999 LZ30 / 9689996 Please read the operator s manual carefully and make sure you understand the instructions before using the machine. English D R O When you need spare parts or support
More informationTable of Contents QUICK REFERENCE GUIDE FOR 42K17Z...A - 1 DECK COMPONENTS... B - 1 DECK LIFT COMPONENTS... C - 1 FRAME COMPONENTS...
4 2 K 1 Z PARTS MANUAL Table of Contents QUICK REFERENCE GUIDE FOR 42K1Z...A - 1 DECK COMPONENTS... B - 1 DECK LIFT COMPONENTS... C - 1 FRAME COMPONENTS... D - 1 DRIVE COMPONENTS... E - 1 CONTROL COMPONENTS
More informationParts Manual Rev. A
115 97 79-27 Rev. A Parts Manual Z 248F / 967 844801-00 Please read the operator manual carefully and make sure you understand the instructions before using the machine. Gasoline containing a maximum of
More informationModels 820 and 840 2
Models 820 and 840 2 Models 820 and 840 1 783-0250 Hood 2 738-0952 Shld. Bolt.375" Dia. x.5" 3 736-0175 Spr. Washer.265" I.D. x.562" OD 4 710-0751 Hex Bolt 1/4-20 x.62" * 6 7-0271 Hex Sems Nut 1/4-20 Thd.
More information