Afripower trading as Hytec

Size: px
Start display at page:

Download "Afripower trading as Hytec"

Transcription

1 Afripower trading as Hytec

2 Afripower (Pty) Limited, trading as Hytec, is a black empowerment enterprise. As the market leader in drive and control technology in Southern Africa, Hytec, established in 1966, provides a total solution from basic hydraulic, pneumatic and automation components to complex drive and control systems. Project Capability Planning & Design Detailed studies, costings and design calculations Autodesk Inventor (3D CAD) Design reviews Detailed manifold design Detailed circuit diagrams Manufacture & Assembly Systems from 0,5kW to 2000kW and above System flow rates from 0,5 to 4000 litres a minute and above Testing Full functional and performance testing Full range of test benches for pumps and motors up to 600kW Installation & Commissioning Hydraulic pipe-work and systems installation Pressure testing and flushing of Training eumatic installed Pnpipe-work up to 4200 litres per minute uit comes umatic circ basic pne symbols interpret component Read and and related hing and diagrams le lifting, pus ble and sing will include dou uits ng Circ rati, incorpo sequencing rs pressure nde between acting cyli relationship erstand the and velocity Und to force ponents and flow atic com ct pneum uator and sele t two act Identify troubleshoo test and ults Build, record res, fellow self for circuits and e a due car, materials ent safely with rk ipm Wo equ machines, workers, ment and system the environ cascades and build ign Des ting troubleshoo Specific Out d to:, Lea ay period Over a 4-d be expose rners will 9) (ISO 121 Symbols es Valve typ controls y valves Speed time dela ed and clos ut Open design layo mended Recom e diagram ement tim Displac paration pre Air ers ting Cylind troubleshoo nance and Mainte ign circuit des Simple design uit circ plex ign Com circuit des Control line Cold and hot commissioning

3 e and Service & Support Service Fault finding System analysis Maintenance contracts Service contacts Fully equiped fleet of service vehicles Repair Bosch Rexroth Service Centre of Competence for Africa Genuine spares Warranties and exchange units A Remanufacturing Program (Reman) for pumps and motors Gearboxes Mobile - Splitter, slew, final drives and wheel drives Industrial - Planetary Training In-house and field training for employees and customers Courses can be developed, specifically aimed at customer or industry needs Accredited by Merseta ulic & Hydra tic a m Pneu g trainin HYDR AULIC TRAIN ING South er pneu n Africa s m Hytec atic and largest su as pp techni Group, ha sociated lier of hy dr eq s indust cal trainer appointe uipmen aulic, t. The d a fu requirery training in recogn ition ll-time need ments Rapid in the s as wel of increase l as hi fluid d indust technologi po gh w skill er indu ry ha cal ad of co s vanc stry. s mpete dictated the ne ement w ncy. ith ed fo r high in the er le vels We ca course n develop an custom s, specific d presen t tr al er or indust ly aimed at aining ry need Bene s. fi ts Bet te compor understa nding nents Bet of hy and te dr circui r understa equipmen aulic t. nding Min try. of hy im draulic Red um time sp uc ent tro Impr ed maint ub le enan oved ce co shooting. plant st s. avail SHEQ (Safety, Health, Environmental and Quality) Inspection and testing to manufacturer specifications SABS ISO 9001

4 Product Range Control equipment Directional control valves l/min 350 bar Proportional valves l/min 350 bar Servo valves l/min 315 bar Logic elements l/min 420 bar Relief valves l/min 350 bar Pressure reducing valves l/min 350 bar Flow control valves l/min 350 bar Mobile load sensing control valves l/min 350 bar Cartridge Valves UNF and metric Poppet type and spool type directional control valves Flow control, Pressure control Directional control Proportional control Filtration products In-line filters for pressures up to 1000 bar Return line filters up to l/min Offline filtration and systems Filter elements from 1 µm and above with ß (x) 1000 Air breathers Suction strainers up to 1000 l/min Fully equip laboratory for oil analysis to ISO 4406 Tubes, hoses and fittings Carbon and stainless steel tubing from Ø6 mm - Ø60 mm Carbon and stainless steel tube fittings Wire and multi spiral hydraulic hose Hose fittings Quick couplers Pumps and Motors Axial piston pumps (open & closed loop) cm³/rev 450 bar Gear pumps 1 56 cm³/rev 250 bar Motors (bent axis & axial) cm³/rev 400 bar Radial piston motors (industrial & wheel drive) cm³/rev 450 bar Hagglunds radial piston motors cm³/rev Nm/bar torque 350 bar max. pressure

5 Cylinders Mill type and industrial cylinders up to Ø600 mm and length up to 9000 mm Tie-rod cylinders from Ø2 and length up to 1000 mm Repair ISO 9001:2000 Gearboxes Planetary Nm Wheel drives Nm Accessories Accumulators Level gauges Pressure switches and gauges Pressure transducers Ball valves Clamps Bell housings Flexible shaft couplings Maintenance Tools & Power Systems Hydraulic cylinders & rams Hydraulic pumps Hydraulic & mechanical pullers Hydraulic tools Hydraulic jacks Stone hydraulic AC & DC power units Pneumatics Standard cylinders Standard valves Valve terminal systems Air preparation & accessories Easy-to-combine handling systems Linear Motion & Assembly Technology Ball rail systems Precision ball screw assemblies Linear bushings Linear motion systems Basic mechanical elements profiles Robot and handling technology Electric Drives & Control Optifeed Indradrive Ecodrive & Ecodrive CS Controllers

6 International Companies represented by the Hytec Group Hytec Branches Cape Town Tel: (021) Durban Tel: (031) Johannesburg Tel: (011) Klerksdorp Tel: (018) Tel: (022) Maputo Mozambique Distributors Pietermaritzburg Steelpoort Tel: (00258) Tel: (015) Tel: (033) Tel: (013) Port Elizabeth Vanderbijlpark Tel: (041) Tel: (016) Walvis Bay - Namibia N&L Supplies Edenvale Tel: (00264) Pretoria Witbank Tel: (012) Tel: (013) Richards Bay HYSA Tel: (00260) Newcastle Saldanha Bay Tel: (034) Windhoek - Namibia Tel: (00264) Kitwe - Zambia HEKO Phalaborwa Tel: (011) Tramtrade Westonaria Tel: (011) Tel: (035) Tel: (011) Kuruman Rustenburg Takoradi - Ghana Lusaka - Zambia Tramtrade Bloemfontein Tel: (053) Tel: (014) Tel: (00233) Tel: (00260) Tel: (051) Kitwe Takoradi Ghana Lusaka Harare Windhoek Walvis Bay Rustenburg Pretoria Steelpoort Witbank Johannesburg Maputo (x6 Operations) Vanderbijlpark Klerksdorp Richards Bay Pietermaritzburg Durban Kuruman Saldanha Cape Town Newcastle Port Elizabeth

Clamping and drive module

Clamping and drive module Clamping and drive module RE 51142/10.05 Replaces: 11.02 1/8 Type UPE 2 Drive power 1.1 kw / 2.2 kw Series 1X Maximum operating pressure 700 bar UPE2_1X Table of contents Contents Page Features 1 Possible

More information

Fixed Displacement Plug-In Motor A2FE

Fixed Displacement Plug-In Motor A2FE Industrial Hydraulics Electric Drives and Controls Linear Motion and ssembly echnologies Pneumatics Service utomation Mobile Hydraulics Fixed Displacement Plug-In Motor 2FE RE 9008/03.97 replaces 04.96

More information

Series TMM Axial Piston Motor. Technical Information

Series TMM Axial Piston Motor. Technical Information Series TMM Axial Piston Motor Technical Information General Description GENERAL DESCRIPTION These motors are designed primarily to be combined with other products in closed circuit systems to transfer

More information

CONTROL PANEL BOX. Lever operated control boxes. Set Point Industrial Technology (Pty) Ltd

CONTROL PANEL BOX. Lever operated control boxes. Set Point Industrial Technology (Pty) Ltd Southern Africa Pneumax is well-suited and capable of satisfying needs in the pneumatic automation and mining fields. We provide well-engineered and reliable products with excellent service levels, and

More information

TPV Variable Displacement Closed Loop System Axial Piston Pump HY-TRANS THE PRODUCTION LINE OF HANSA-TMP HT 16 / M / 501 / 1009 / E

TPV Variable Displacement Closed Loop System Axial Piston Pump HY-TRANS THE PRODUCTION LINE OF HANSA-TMP HT 16 / M / 501 / 1009 / E HYDRAULIC COMPONENTS HYDROSTATIC TRANSMISSIONS GEARBOXES - ACCESSORIES HY-TRANS THE PRODUCTION LINE OF HANSA-TMP Via M. L. King, 6-41122 MODENA (ITALY) Tel: +39 059 415 711 Fax: +39 059 415 729 / 059 415

More information

SCM M2. Other advantages:

SCM M2. Other advantages: Sunfab s SCM 025-108 M2 is a range of robust axial piston motors with cartridge flange especially suitable for winch-, slewing-, wheel- and track drives. SCM 025-108 M2 is of the bent-axis type with spherical

More information

Pump model PVPP-*-3023 PVPP-*-3033 PVPP-*-4048 PVPP-*-5060 PVPP-* Max flow at 1500 rpm and 7 bar [l/min]

Pump model PVPP-*-3023 PVPP-*-3033 PVPP-*-4048 PVPP-*-5060 PVPP-* Max flow at 1500 rpm and 7 bar [l/min] 900 Table A0obs/E Axial piston pumps type PVPP, variable displacement, high pressure operation Hydraulic and electrohydraulic control obsolete components - availability on request PVPP-SLER-08/D PVPP are

More information

P R O D U C T G U I D E

P R O D U C T G U I D E PRODUCT GUIDE HYDROPRESS company provides complete solutions for hydraulic industry from 20 years in Poland. Our philosophy is clear - to be the most complete supplier of high quality hydraulic components

More information

HYDAC DC Compact Power Units DC1

HYDAC DC Compact Power Units DC1 HYDAC DC Compact Power Units DC1 up to 250 bar up to 18.4 l/min In accordance with EN 60034-1 suitable for short-term operation 981 1. TECHNICAL SPECIFICATIONS 1.1 GENERAL Very low noise level due to special

More information

Series 20 Axial Piston Pumps. Technical Information

Series 20 Axial Piston Pumps. Technical Information Series 20 Axial Piston Pumps Technical Information General Description INTRODUCTION Sauer-Danfoss a world leader in hydraulic power systems has developed a family of axial piston pumps. DESCRIPTION Sauer-Danfoss

More information

Series 20 Axial Piston Motors. Technical Information

Series 20 Axial Piston Motors. Technical Information Series 20 xial Piston Motors Technical Information General Description INTRODUCTION Sauer-Danfoss a world leader in hydraulic power systems has developed a family of axial piston motors. DESCRIPTION Sauer-Danfoss

More information

Series 20 Axial Piston Pumps. Technical Information

Series 20 Axial Piston Pumps. Technical Information Series 20 Axial Piston Pumps Technical Information General Description INTRODUCTION Sauer-Danfoss a world leader in hydraulic power systems has developed a family of axial piston pumps. DESCRIPTION Sauer-Danfoss

More information

Fixed Displacement Motor AA2FM (A2FM)

Fixed Displacement Motor AA2FM (A2FM) Fixed Displacement Motor 2FM (2FM) Series 6, for Open and Closed Circuits xial Piston, ent xis Design 5800 psi 6500 psi rueninghaus Hydromatik Sizes 5 1000 Nominal Pressure up to Peak Pressure up to (400

More information

Series 20 Axial Piston Motors. Technical Information

Series 20 Axial Piston Motors. Technical Information Series 20 xial Piston Motors Technical Information General Description INTRODUCTION Sauer-Danfoss a world leader in hydraulic power systems has developed a family of axial piston motors. DESCRIPTION Sauer-Danfoss

More information

AXIAL PISTON PUMPS VARIABLE DISPLACEMENT

AXIAL PISTON PUMPS VARIABLE DISPLACEMENT FEATURES The Series is a family of variable displacement axial piston pumps for use in closed circuits. The displacement is continuously variable by means of a tilting swash plate and the oil flow direction

More information

RA / Pressure Reducing Valve, Pilot Operated Model DR (Series 5X) Ordering code 1/ PSI (350 bar) GPM (400 L/min)

RA / Pressure Reducing Valve, Pilot Operated Model DR (Series 5X) Ordering code 1/ PSI (350 bar) GPM (400 L/min) R 26 892/06.98 Pressure Reducing Valve, Pilot Operated Model DR (Series 5) Size 10 to 0... 5000 PSI (50 bar)... 105 GPM (400 L/min) R 26 892/06.98 Replaces: 05.94 Pilot operated pressure reducing valve

More information

Fixed Displacement Motor A2FM

Fixed Displacement Motor A2FM rueninghaus Hydromatik Series 6, for use in open and closed circuits xial tapered piston - bent axis design Sizes 5...1000 Nom. Pressure up to 400 bar Peak Pressure up to 4 bar RE 91001/01.97 RE 91001/01.97

More information

CS-SCB Sander Control Block Manual

CS-SCB Sander Control Block Manual Electric Drives and Controls Hydraulics Linear Motion and Assembly Technologies Pneumatics Service CS-SCB Sander Control Block Manual The Drive & Control Company Copyright 1996 Bosch Rexroth Canada All

More information

Hydraulic quick stop valve Hägglunds VQCB 800

Hydraulic quick stop valve Hägglunds VQCB 800 Hydraulic quick stop valve Hägglunds VQCB 800 RE 15375 Edition: 12.2014 Replaces: New Valid for Hägglunds CA, CB, CBP, CBM Maximum flow 800 lpm (208 gpm) Fast response time, i.e. 100-150 ms Max pressure

More information

Genuine Metaris MA10VO/VSO Technical Catalog. Variable Displacement Piston Pump - A10V Series 31 & 52

Genuine Metaris MA10VO/VSO Technical Catalog. Variable Displacement Piston Pump - A10V Series 31 & 52 Genuine Metaris MA10VO/VSO Technical Catalog www.metaris.com Contents General Series MA10VO/VSO Series 31 4 Page Features 4 Technical Data 5 Performance Information 6 Model Code Breakdown 9 Fluid Info

More information

Fixed Displacement Bent Axis Axial Piston Motors TMB 700

Fixed Displacement Bent Axis Axial Piston Motors TMB 700 HYDRAULIC COMPONENTS HYDROSTATIC TRANSMISSIONS GEARBOXES - ACCESSORIES Certified Company ISO 9001:2015-14001:2015 ISO 9001:2015 Certificate N 12-Q-0200545-TIC ISO 14001:2015 Certificate N 12-E-0200545-TIC

More information

Hydraulics. Axial Piston Pumps Series PVP. Introduction. With thru shaft option for multiple pump options Swash plate type for open circuit

Hydraulics. Axial Piston Pumps Series PVP. Introduction. With thru shaft option for multiple pump options Swash plate type for open circuit Introduction *not included Pump with standard compensator, code: "omit" With thru shaft option for multiple pump options Swash plate type for open circuit Pump with load sensing, code: "A" Mounting style

More information

MOTOR SCM M2

MOTOR SCM M2 MOTOR SCM 025 108 M2 Sunfab SCM M2 is a range of robust axial piston motors especially suitable for winch-, slewing-, wheeland track drives. Sunfab SCM M2 is of the bent-axis type with spherical pistons.

More information

Series 31 compact cylinders 1/

Series 31 compact cylinders 1/ Series 3 compact cylinders Double and single-acting, double-acting non-rotating, magnetic ø2, 6, 20, 25 mm ø 32, 40, 50, 63, 80, 00 mm UNITOP The compact dimensions allow Series 3 single and double-acting

More information

Radial piston motor for track drives MCR-T

Radial piston motor for track drives MCR-T Radial piston motor for track drives MCR-T RE 15221 Edition: 03.2017 Replaces 07.2015 Frame size MCR5, MCR6, MCR10 Displacement 620cc to 1340cc Differential pressure up to 400 bar Torque output up to 8530

More information

RE / Check-Q-meter type FD, series 2X. Ordering details FD 2X / V * Symbols 1/8. Replaces: 03.92

RE / Check-Q-meter type FD, series 2X. Ordering details FD 2X / V * Symbols 1/8. Replaces: 03.92 RE 1/09.9 1/03.9 Check-Q-meter type FD, series Sizes 1, 1,, 3 Up to 0 L/min Up to 30 bar RE 1/09.9 Replaces: 03.9 Features: For installation in manifolds (cartridge valve), With SE flanged ports, For sub-plate

More information

CATALOGUE Edition 6 1

CATALOGUE Edition 6 1 CATALOGUE Edition 6 1 CONTENTS ODF CATALOGUE EDITION 6 PISTON PUMPS 4 AND 3 BOLT BENT AXIS PISTON PUMPS 40/30 SERIES GEAR PUMPS TANDEM GEAR PUMPS VANE PUMPS ADAPTORS, COUPLINGS, FLANGES TIPPING VALVES

More information

Radial piston motors for industrial applications MCR-D

Radial piston motors for industrial applications MCR-D Radial piston motors for industrial applications MCR-D MCR-E RE 15196 Edition: 02.2017 Replaces: 12.2013 MCR-D Frame size MCR3, MCR5, MCR10 Displacement 160 cc to 1340 cc Differential pressure up to 450

More information

TORC.COM TORC. Innovative Torque Technology

TORC.COM TORC. Innovative Torque Technology h i m e u ng ha l ch an ite sa es nd im th a n ds d c h f s f ite l e u ge fr lea ig as ree d c h im sa s ee ra hfl t s bo lea ch an ite fas bo nc ow wit lt ra d c hi t lt e p c in n a d he ng s f l gh

More information

"CABLE AND PULLEY" SYSTEM

CABLE AND PULLEY SYSTEM brano industries (pty) ltd. P O Box 277, Bramley, 2018, Rep. of South Africa. tel (011) 887-0625 fax (011) 887-7616 Share-call :- 08600 - BRANO 08600-27266 e-mail :- sales@brano.co.za Website :- www.brano.co.za

More information

Quality. 1. Cam ring 2. Cam roller 3. Piston 4. Shaft coupling Connection block 10. Valve plate 11. Axial bearing 6

Quality. 1. Cam ring 2. Cam roller 3. Piston 4. Shaft coupling Connection block 10. Valve plate 11. Axial bearing 6 Functional description Hägglunds hydraulic industrial motor COMPACT CB is of the radial-piston type with a rotating cylinder block/hollow shaft and a stationary housing. The cylinder block is mounted in

More information

TPV 4000 (EX 28-41) Variable Displacement Closed Loop System Axial Piston Pump HY-TRANS THE TRANSMISSION LINE OF HANSA-TMP HT 16 / M / 280 / 1008 / E

TPV 4000 (EX 28-41) Variable Displacement Closed Loop System Axial Piston Pump HY-TRANS THE TRANSMISSION LINE OF HANSA-TMP HT 16 / M / 280 / 1008 / E HYDRAULIC COMPONENTS HYDROSTATIC TRANSMISSIONS GEARBOXES - ACCESSORIES Via M.L. King, 6-41122 MODENA (ITALY) Tel: +39 059 415 711 Fax: +39 059 415 729 / 059 415 730 INTERNET: http://www.hansatmp.it E-MAIL:

More information

PVG 120 Proportional Valves. Service Parts Manual

PVG 120 Proportional Valves. Service Parts Manual PVG 120 Proportional Valves Service Parts Manual Contents and Data Survey CONTENTS AND DATA SURVEY Page Sectional drawing... 3 Identification...4 Installation PVG... 5 Spare parts... 22 Pos. 1: PVP, pump

More information

Flow sharing control block in mono block / sandwich plate design M6-22

Flow sharing control block in mono block / sandwich plate design M6-22 Flow sharing control block in mono block / sandwich plate design M6-22 RE 64322 Edition: 01.2015 Replaces: 05.2012 Size 22 Series 3X Maximum operating pressure on pump side 350 bar on consumer side 420

More information

Radial piston motor for compact drives MCR-C

Radial piston motor for compact drives MCR-C Radial piston motor for compact drives MCR-C RE 15197 Edition: 12.2013 Frame size MCR20 Displacement 1750 cc to 3000 cc Differential pressure up to 450 bar Torque output up to 19099 Nm Speed up to 125

More information

September 2012 JLe HIGH PRESSURE PUMP HPW 1600/ (LS)

September 2012 JLe HIGH PRESSURE PUMP HPW 1600/ (LS) 1 HIGH PRESSURE PUMP HPW 1600/15-140 September 2012 JLe OUTLINE DIMENSIONS WP P T S 1 3 S 150 Ø 8.0 30 90 155 405 155 195 5 30 40 M 10 4 pcs. HYDRAULIC FLOW l/min, max. 140 FLUID CONNECTIONS HYDRAULIC

More information

Variable Displacement Plug-In Motor A6VE

Variable Displacement Plug-In Motor A6VE Electric Drives and Controls Hydraulics Linear Motion and Assembly echnologies Pneumatics Service Variable Displacement Plug-In Motor A6VE RE 91 606/06.05 1/16 Replaces: 05.99 echnical data sheet Series

More information

Radial piston motor for frame integrated drives MCR-A

Radial piston motor for frame integrated drives MCR-A Radial piston motor for frame integrated drives MCR-A RE 15195 Edition: 12.2013 Frame size MCR3, MCR5, MCR10 Displacement 160 cc to 1340 cc Differential pressure up to 450 bar Torque output up to 8530

More information

DURHAM GEO SLOPE INDICATOR

DURHAM GEO SLOPE INDICATOR SOILS S-60 Load Frame for CBR, LBR, UCC Testing ASTM* D 883, D 266 AASHTO* T 93, T 208 * See Standards Buyer's Guide at www.dgsi.info/3000. Time-proven, reliable mechanical load frame. Operator convenience

More information

SCM ISO. SCM ISO is a range of robust axial piston motors especially suitable for mobile hydraulics.

SCM ISO. SCM ISO is a range of robust axial piston motors especially suitable for mobile hydraulics. SCM 010-130 ISO is a range of robust axial piston motors especially suitable for mobile hydraulics. SCM 010-130 ISO is of the bent-axis type with spherical pistons. The design results in a compact motor

More information

BENT AXIS PISTON MOTORS SERIES HPM FLANGE ISO HPM. pag.3

BENT AXIS PISTON MOTORS SERIES HPM FLANGE ISO HPM. pag.3 ENT AXIS PISTON MOTORS SERIES HPM FLANGE ISO 3019-2 HPM pag.3 TECHNICAL FEATURES ENT AXIS PISTON MOTORS SERIES HPM FLANGE ISO 3019-2 TECHNICAL FEATURES Displacement cm 3 /rev 12 17 25 34 40 47 55 64 80

More information

External gear pump Series G

External gear pump Series G External gear pump Series G RE 10 093/04.14 Replace RE 10 093/06.13 AZPG-22 Fixed pumps V = 22.5...100 cm 3 / rev Overview of contents Contents Page General 2 Product overview 3 Ordering code single pumps

More information

Flow sharing control block in mono block / sandwich plate design M6-15

Flow sharing control block in mono block / sandwich plate design M6-15 Flow sharing control block in mono block / sandwich plate design M6-15 RE 64321 Edition: 01.2015 Replaces: 05.2012 Size 15 Series 3X Maximum operating pressure on pump side 350 bar on consumer side 420

More information

HYDAC (Three-Phase Current) Compact Power Units CO1

HYDAC (Three-Phase Current) Compact Power Units CO1 HYDAC (Three-Phase Current) Compact Power Units CO1 Up to 250 bar Up to 20 l/min In accordance with EN 60034-1 suitable for: Short-term operation: S2 = 5 min* (average value) Intermittent operation: S3

More information

Radial piston motor for compact drives MCR-C

Radial piston motor for compact drives MCR-C Radial piston motor for compact drives MCR-C RE 15197 Edition: 02.2017 Replaces: 12.2013 Frame size MCR20 Displacement 1750 cc to 3000 cc Differential pressure up to 450 bar Torque output up to 19099 Nm

More information

The product information and specifications within this catalogue should be viewed as a guide only and are subject to change without notice.

The product information and specifications within this catalogue should be viewed as a guide only and are subject to change without notice. Wheel gears... 3 Axial piston pumps... 3 Axial piston motors... 3 Winches... 4 Radial piston pumps... 4 Radial piston motors... 4 Slewing rings... 5 Gear pumps... 5 Gear flow dividers... 5 Cylinders...

More information

Double and single-acting, double-acting non-rotating, magnetic ø12, 16, 20, 25 mm ø 32, 40, 50, 63, 80, 100 mm UNITOP

Double and single-acting, double-acting non-rotating, magnetic ø12, 16, 20, 25 mm ø 32, 40, 50, 63, 80, 100 mm UNITOP CATALOGUE > Release 8.7 > Series 3 cylinders Series 3 compact cylinders Double and single-acting, double-acting non-rotating, magnetic ø2, 6, 20, 25 mm ø 32, 40, 50, 63, 80, 00 mm UNITOP» Compact design»

More information

Axial Piston Fixed Pump A17FNO Series 10

Axial Piston Fixed Pump A17FNO Series 10 Axial Piston Fixed Pump A17FNO Series 10 RE 91510 Issue: 06.2012 Replaces: 03.2010 Size 125 Nominal pressure 250 bar Maximum pressure 300 bar For commercial vehicles Open circuit Features Fixed pump with

More information

External Gear Pumps Series F

External Gear Pumps Series F External Gear Pumps Series F RA 10089/08.11 Replaces: RA 10097 1/60 AZPF-... Fixed pumps Size 4.0...28 cm 3 /rev (.25-1.71 in 3 /rev) Overview of contents Contents Page General 2 Product overview 3 single

More information

AP212HP Cast Iron Gear Pumps

AP212HP Cast Iron Gear Pumps Cast Iron Gear Pumps Standard and Low Noise series Reference: 200-P-991236-EN-01 Issue: 09.2016 1/56 Contents Page 1 General information... 5 1.1 External gear pumps components... 6 1.2 Technical data...

More information

CONTENT Axial Piston Motors and Pumps Fixed Displacement. Technical Specification Guide...2. Hydraulic motor MAP Hydraulic motor MAP50...

CONTENT Axial Piston Motors and Pumps Fixed Displacement. Technical Specification Guide...2. Hydraulic motor MAP Hydraulic motor MAP50... CONTENT CONTENT Aial Piston Motors and Pumps Fied Displacement PAGE Technical Specification Guide...2 Hydraulic motor...6 Hydraulic motor MAP5...1 Hydraulic motor MAP1...2 MAP5 Hydraulic pump PAP5...29

More information

Monarch D.C. Hydraulic Power Systems. Comprehensive information may be found on the page referenced below each selection category.

Monarch D.C. Hydraulic Power Systems. Comprehensive information may be found on the page referenced below each selection category. Monarch D.C. Hydraulic Power Systems MODEL M-319 Description: Pump/Motor/Reservoir/Valve Check Valve 2-Way/2-Position Normally Closed Solenoid Operated Lowering Valve Externally Adjustable Relief Valve

More information

ACCESSORIES CATALOGUE EDITION 01

ACCESSORIES CATALOGUE EDITION 01 ACCESSORIES CATALOGUE EDITION 01 BRANCHES PORT ELIZABETH 200 Kempston Road, Sidwell, Port Elizabeth 6001 P.O. Box 3503, North End, Port Elizabeth 6056 Tel: (041) 451-5641 Fax: (041) 451-5650 epsales.pel@actom.co.za

More information

External Gear Motors. RE /01.05 Replaces: /01.99 AZMF..., AZMN..., AZMG...

External Gear Motors. RE /01.05 Replaces: /01.99 AZMF..., AZMN..., AZMG... Industrial Electric Drives Linear Motion and Service Mobile Hydraulics and Controls Assembly Technologies Pneumatics Automation Hydraulics External Gear Motors RE 14 26/1.5 Replaces: 1 987 76 11/1.99 AZMF...,

More information

SCM SAE. Other advantages: Sunfab s SCM SAE is a range of robust axial piston motors especially suitable for mobile hydraulics.

SCM SAE. Other advantages: Sunfab s SCM SAE is a range of robust axial piston motors especially suitable for mobile hydraulics. Sunfab s SCM 010-130 SAE is a range of robust axial piston motors especially suitable for mobile hydraulics. SCM 010-130 SAE is of the bent-axis type with spherical pistons. The design results in a compact

More information

New Fixed Displacement Industrial Hydraulic Power Packs

New Fixed Displacement Industrial Hydraulic Power Packs New Fixed Displacement Industrial Hydraulic Power Packs Designed for Industrial Applications... Delivered in Minimal Time... Standard Features: Pressures up to 3000 PSI Flow: 0.4 to 10 GPM Fixed displacement

More information

Logic elements. Differential pressure sensing elements for applications up to 350 bar (5000 psi) and 400 L/min (100 USgpm)

Logic elements. Differential pressure sensing elements for applications up to 350 bar (5000 psi) and 400 L/min (100 USgpm) Hydraulic Screw-in Cartridge Valves (SiCV) Logic elements Differential pressure sensing elements for applications up to 50 bar (5000 psi) and 400 L/min (00 USgpm) Logic elements LOGC ELEMENTS... -4 APPLCATON

More information

Hydraulic Fixed Piston Rexroth A2FE Motor

Hydraulic Fixed Piston Rexroth A2FE Motor Hydraulic Fixed Piston Rexroth A2FE Motor Series 6, axial tapered piston, bent axis design for mounting in mechanical gearboxes Pressure up to 400 bar Peak Pressure up to 450 bar he fixed displacement

More information

Truck Hydraulics. Serie VP1 Variable Displacement Pumps

Truck Hydraulics. Serie VP1 Variable Displacement Pumps ruck Hydraulics Variable Displacement Pumps aerospace climate control electromechanical filtration fluid & gas handling hydraulics pneumatics process control sealing & shielding Contents Pump and line

More information

UŽSISAKYKITE internetu telefonu el. paštu

UŽSISAKYKITE internetu  telefonu el. paštu Features Axial piston pump MA10VO in swashplate design is used in open loop circuits. Flow is proportional to drive speed and displacement. By adjusting the position of the swashplate it is possible to

More information

4/3-way high response directional control valve pilot operated with electrical feedback and integrated electronics (OBE)

4/3-way high response directional control valve pilot operated with electrical feedback and integrated electronics (OBE) 4/3-way high response directional control valve pilot operated with electrical feedback and integrated electronics (OE) ype 4WRDE Nominal size to 35 Component series 5X Maximum operating pressure 3 bar

More information

Bieri Hydraulik standard components from 500 up to 1000 bar High pressure hydraulic systems for various applications

Bieri Hydraulik standard components from 500 up to 1000 bar High pressure hydraulic systems for various applications Bieri Hydraulik standard components from 500 up to 1000 bar High pressure hydraulic systems for various applications Including the new 500 serie Axial and radial piston pumps, valves, pressure switches,

More information

Axial piston variable pump (A)A4VSO

Axial piston variable pump (A)A4VSO Axial piston variable pump (A)A4VSO RA 92050-A/06.09 1/64 Replaces: 09.97 Data sheet Series 10, 11 and 30 Size 40...1000 Nominal pressure 5100 psi (350 bar) Peak pressure 5800 psi (400 bar) Open circuit

More information

The Hydraulic Warehouse Australian Distributor of Quality Hydraulic Brands

The Hydraulic Warehouse Australian Distributor of Quality Hydraulic Brands Product RANGE The Hydraulic Warehouse Australian Distributor of Quality Hydraulic Brands The Hydraulic Warehouse is Australia s leading distributor of quality hydraulic brands. Based in Sydney Australia,

More information

Axial Piston Fixed Displacement Pump KFA

Axial Piston Fixed Displacement Pump KFA Industrial Hydraulics Electric Drives and Controls Linear Motion and Assembly Technologies Pneumatics Service Automation Mobile Hydraulics Axial Piston Fixed Displacement Pump KFA RE 91 501/06.03 1/12

More information

COMPACT. Series CA 50 - CA 210

COMPACT. Series CA 50 - CA 210 COMPACT Series CA 50 CA 210 Hägglunds Drives AB Hägglunds Drives AB is the worldwide market leader in design, manufacture and supply of heavyduty hydraulic motors and complete drive systems. Our head office

More information

Axial Piston Fixed Motor A2FM

Axial Piston Fixed Motor A2FM Axial Piston Fixed Motor A2FM RE 91001/06.2012 1/46 Replaces: 09.07 Data sheet Series 6 Size Nominal pressure/maximum pressure 5 315/350 bar 10 to 200 400/450 bar 250 to 1000 350/400 bar Open and closed

More information

Radial piston motor for integrated drives MCR-H

Radial piston motor for integrated drives MCR-H Radial piston motor for integrated drives MCR-H RE 15199 Edition: 03.2017 Replaces: 12.2013 Frame size MCR3, MCR5, MCR10, MCR15, MCR20 Displacement 160 cc to 3000 cc Differential pressure up to 450 bar

More information

Radial piston hydraulic motor Hägglunds CAb

Radial piston hydraulic motor Hägglunds CAb Radial piston hydraulic motor Hägglunds CAb RE 15354 Edition: 12.2016 Replace: 01.2015 Frame Size: CAb 10, 20, 30, 40 Displacement: 503 2 513 cm 3 /rev [31-153 in 3 /rev] Specific torque: 8 40 Nm/bar [407

More information

D660 Series Servo-Proportional Control Valves with Integrated Electronics ISO 4401 Size 05 to 10

D660 Series Servo-Proportional Control Valves with Integrated Electronics ISO 4401 Size 05 to 10 D660 Series Servo-Proportional Control Valves with Integrated Electronics ISO 4401 Size 05 to 10 OVERVIEW Section Page MOOG SERVO-PROPORTIONAL CONTROL VALVES Overview 2 3 Technical Data 4 5 Electronics

More information

TMF 500. Fixed Displacement Axial Piston Motor for Open and Closed Loop System MANUFACTURING THE PRODUCTION LINE OF HANSA-TMP

TMF 500. Fixed Displacement Axial Piston Motor for Open and Closed Loop System MANUFACTURING THE PRODUCTION LINE OF HANSA-TMP HYDRAULIC COMPONENTS HYDROSTATIC TRANSMISSIONS GEARBOXES - ACCESSORIES MANUFACTURING THE PRODUCTION LINE OF HANSA-TMP Via M. L. King, 6-41122 MODENA (ITALY) Tel: +39 059 415 711 Fax: +39 059 415 729 /

More information

BULK FOOD TROLLEY MODEL BFT-150-E

BULK FOOD TROLLEY MODEL BFT-150-E BULK FOOD TROLLEY MODEL BFT-150-E Index: General Data 2 Owner s Responsibility 3 Authorised Vulcan Catering Equipment Branches and Dealers 3 Parts Ordering / Service Information 4 Prior to Installation

More information

SCM DIN. Other advantages:

SCM DIN. Other advantages: SCM 012-130 DIN SCM 012-130 DIN is a series of axial piston motors particularly suitable for mobile hydraulics. SCM 012130 DIN is of the bent-axis type with spherical pistons. Other advantages: The design

More information

Mobile Hydraulic Pumps T6EM, T6EP. We are doing our parts to keep you moving! Denison Vane Technology, fixed displacement

Mobile Hydraulic Pumps T6EM, T6EP. We are doing our parts to keep you moving! Denison Vane Technology, fixed displacement Mobile Hydraulic Pumps T6EM, T6EP Denison Vane Technology, fixed displacement Hydraulic Pumps Hydraulic Motors Hydraulic Valves Hydraulic Cylinders Hydraulic Filtration Hydraulic Accumalators We are doing

More information

Axial Piston Variable Pump (A)A4VSG (US-Version)

Axial Piston Variable Pump (A)A4VSG (US-Version) Electric Drives and Controls Hydraulics Linear Motion and ssembly Technologies Pneumatics Service xial Piston Variable Pump ()4VSG (US-Version) R- 92100/12.12 1/72 Replaces: 10.97 Data sheet Series 10,

More information

Variable Displacement Open Loop Circuit Axial Piston Pumps. V Series

Variable Displacement Open Loop Circuit Axial Piston Pumps. V Series HYDRAULIC COMPONENTS HYDROSTATIC TRANSMISSIONS GEARBOXES - ACCESSORIES Via M. L. King, 6-41122 MODENA (ITALY) Tel: +39 59 415 711 Fax: +39 59 415 729 / 59 415 73 INTERNET: http://www.hansatmp.it E-MAIL:

More information

MP18/SIC & SIO Stacking Valve System Technical Information Manual

MP18/SIC & SIO Stacking Valve System Technical Information Manual Electric Drives and Controls Hydraulics Linear Motion and Assembly Technologies Pneumatics Service MP18/SIC & SIO Stacking Valve System Technical Information Manual The Drive & Control Company Copyright

More information

Gear Pumps / Motors. Series PGP / PGM Fixed Displacement Pumps, Cast-Iron and Aluminium Designs

Gear Pumps / Motors. Series PGP / PGM Fixed Displacement Pumps, Cast-Iron and Aluminium Designs Gear Pumps / Motors Series PGP / PGM Fixed Displacement Pumps, Cast-Iron and Aluminium Designs Table of contents Heavy-duty Pumps and Motors Series PGP, PGM Contents Page Series 500 Aluminium Table of

More information

TPV Variable Displacement Closed Loop System Axial Piston Pump MANUFACTURING THE PRODUCTION LINE OF HANSA-TMP HT 16 / M / 403 / 1110 / E

TPV Variable Displacement Closed Loop System Axial Piston Pump MANUFACTURING THE PRODUCTION LINE OF HANSA-TMP HT 16 / M / 403 / 1110 / E HYDRAULIC COMPONENTS HYDROSTATIC TRANSMISSIONS GEARBOXES - ACCESSORIES Via M. L. King, 6-41122 MODENA (ITALY) Tel: +39 059 415 711 Fax: +39 059 415 729 / 059 415 730 INTERNET: http://www.hansatmp.it E-MAIL:

More information

AP212 Gear Pumps. Standard and Low Noise series. Reference: 200-P EN-03 1/60. Issue:

AP212 Gear Pumps. Standard and Low Noise series. Reference: 200-P EN-03 1/60. Issue: Gear Pumps Standard and Low Noise series Reference: 2-P-99123-EN-3 Issue: 9.215 1/6 Contents Page 1 General information... 4 1.1 External gear pumps components... 5 1.2 Example of typical sound pressure

More information

Axial Piston Variable Pump A2VK

Axial Piston Variable Pump A2VK Electric Drives and Controls Hydraulics Linear Motion and Assembly Technologies Pneumatics Service Axial Piston Variable Pump A2VK RE 94001/06.10 1/12 Replaces: 07.04 Data sheet Size 12 to 107 Series 1

More information

PISTON MOTORS FOR CLOSED LOOP SYSTEMS types HMF/A/V/R-02

PISTON MOTORS FOR CLOSED LOOP SYSTEMS types HMF/A/V/R-02 1-control optional swashing to 0 cc /rev 2-swash plate hydrostatic bearing 3-piston-slipper assembly 21 swash angle 4-housing monoshell for high rigidity 5-valve plate housing highly integrated 6-control

More information

OSPB, OSPC, OSPR, OSPD Open Center Steering units OSPB Closed Center Steering units TAD Torque amplifiers. Technical Information

OSPB, OSPC, OSPR, OSPD Open Center Steering units OSPB Closed Center Steering units TAD Torque amplifiers. Technical Information OSPB, OSPC, OSPR, OSPD Open Center Steering units OSPB Closed Center Steering units TAD Torque amplifiers Technical Information A wide range of steering components A WIDE RANGE OF STEERING COMPONENTS F300599

More information

RA / Internal Gear Pump Model GP2, Series 2X Fixed Displacement. Typical application:

RA / Internal Gear Pump Model GP2, Series 2X Fixed Displacement. Typical application: Sizes 6.3 to 16 Internal Gear Pump Model GP2, Series 2X Fixed Displacement up to 576 PSI.397 to.98 in 3 (35 bar) (6.5 to 16 cm 3 ) RA 1 23/6.97 RA 1 23/6.97 Characteristics: Peak pressure of up to 576

More information

Section 6.1. Implement Circuit - General System. General: TF Configuration TB Configurations Implement Control Valve:

Section 6.1. Implement Circuit - General System. General: TF Configuration TB Configurations Implement Control Valve: Section 6.1 Implement Circuit - General System General: TF Configuration... 6.1.3 TB Configurations... 6.1.5 Implement Pump Breakdown... 6.1.6 Operational Description: General... 6.1.7 Compensator Control...

More information

The DPQ Series 2X Digital Injection Process Controller

The DPQ Series 2X Digital Injection Process Controller Electric Drives and Controls Linear Motion and Assembly Technologies Pneumatics Service The DPQ Series 2X Digital Injection Process Controller The Drive & Control Company 1 The Injection Process Perfect

More information

AXIAL PISTON MOTORS MF S E R I E S 2 0 C L O S E D C I R C U I T

AXIAL PISTON MOTORS MF S E R I E S 2 0 C L O S E D C I R C U I T AXIAL PISTON MOTORS MF GENERAL DESCRIPTION Axial piston fixed displacement motors, Series 20, are of swash plate construction with preset displacement, and are intendent for closed circuit operation. The

More information

Replacement Elements

Replacement Elements Pressure Elements Used in OFS Series, OFCS & OFCD Series, OFAS & OFAD Series, OF5HS & OF5HD Series, and OFX Skid - Standard Capacity Series 9 inch Elements 18 inch Elements 27 inch Elements Part No. Part

More information

TUTORIAL QUESTIONS FOR THE INDUSTRIAL HYDRAULICS COURSE TEP 4205

TUTORIAL QUESTIONS FOR THE INDUSTRIAL HYDRAULICS COURSE TEP 4205 TUTORIAL QUESTIONS FOR THE INDUSTRIAL HYDRAULICS COURSE TEP 4205 The book for the course is Principles of Hydraulic System Design, by Peter J Chapple. Published by Coxmoor Publishing Co., UK. Available

More information

RV1P /118 ED VARIABLE DISPLACEMENT VANE PUMPS SERIES 10 OPERATING PRINCIPLE TECHNICAL SPECIFICATIONS HYDRAULIC SYMBOL

RV1P /118 ED VARIABLE DISPLACEMENT VANE PUMPS SERIES 10 OPERATING PRINCIPLE TECHNICAL SPECIFICATIONS HYDRAULIC SYMBOL 14 201/118 ED RV1P VARIABLE DISPLACEMENT VANE PUMPS OPERATING PRINCIPLE TECHNICAL SPECIFICATIONS (measured with mineral oil with viscosity of 46 cst at 40 C) RV1P are variable displacement vane pumps with

More information

Single and double-acting, cushioned, magnetic. ø 32, 40, 50, 63 mm

Single and double-acting, cushioned, magnetic. ø 32, 40, 50, 63 mm > Series 97 stainless steel cylinders CATALOGUE > Release 8.7 Series 97 stainless steel cylinders Single and double-acting, cushioned, magnetic. ø 32, 40, 50, 63 mm»» Clean design»» Stainless steel AISI

More information

MOTOR SCM ISO

MOTOR SCM ISO MOTOR SCM 012-130 ISO SCM 012-130 ISO is a range of robust axial piston motors especially suitable for mobile hydraulics. SCM 012-130 ISO is of the bent-axis type with spherical pistons. The design results

More information

Asynchronous motors. 7/2 Main spindle motors for SIMODRIVE 611 7/2 Introduction

Asynchronous motors. 7/2 Main spindle motors for SIMODRIVE 611 7/2 Introduction / Main spindle motors for SIMODRIVE 611 / Introduction /4 Main spindle motors for SIMODRIVE 611 1PH motors with solid shaft/forced ventilation /18 Main spindle motors for SIMODRIVE 611 1PH4 motors with

More information

TMF 600 ( cm³/rev.)

TMF 600 ( cm³/rev.) HYDRAULIC COMPONENTS HYDROSTATIC TRANSMISSIONS GEARBOXES - ACCESSORIES Certified Company ISO 9001-14001 ISO 9001 Via M. L. King, 6-41122 MODENA (ITALY) Tel: +39 059 415 711 Fax: +39 059 415 729 / 059 415

More information

V Series AXIAL PISTON PUMP ORDER CODE

V Series AXIAL PISTON PUMP ORDER CODE V Series AXIAL PISTON PUMP ORDER CODE V 15 A 1 R B S - A 1 D X A 11 Customers demand Pump Series V Links Type (only V 15-18): none - Standard A - SAE A 2 bolts Ma. Displacement (cm 3 /n): 15, 18, 23, 25,

More information

4/2 servo solenoid valves with on-board electronics (OBE), positive overlap and position feedback

4/2 servo solenoid valves with on-board electronics (OBE), positive overlap and position feedback Electric Drives and Controls Hydraulics Linear Motion and Assembly Technologies Pneumatics Service 4/2 servo solenoid valves with on-board electronics (OBE), positive overlap and position feedback RA 29024/01.05

More information

TPF 60 (36,16 49,94 cm³/rev.)

TPF 60 (36,16 49,94 cm³/rev.) HYDRAULIC COMPONENTS HYDROSTATIC TRANSMISSIONS GEARBOXES - ACCESSORIES Certified Company ISO 9001-14001 ISO 9001 Via M. L. King, 6-41122 MODENA (ITALY) Tel: +39 059 415 711 Fax: +39 059 415 729 / 059 415

More information

Hydraulic Motor (Radial piston multi-stroke)

Hydraulic Motor (Radial piston multi-stroke) RE 15 207/03.94 Hydraulic Motor (Radial piston multi-stroke) Type MCR 10, Series 3X RE 15 207/02.98 Sizes 7 to1340 up to 450 bar up to 1340 cm 3 up to 27 Nm Replaces: 10.97 Compact, robust construction

More information

HYDRAULIC OIL PUMPS AND MOTORS PRODUCT CATALOG. Hybel - Hydraulic Oil Pumps and Motors

HYDRAULIC OIL PUMPS AND MOTORS PRODUCT CATALOG. Hybel - Hydraulic Oil Pumps and Motors HYDRAULIC OIL PUMPS AND MOTORS PRODUCT CATALOG Hybel Hydraulic Oil Pumps and Motors HYDRAULIC OIL PUMPS AND MOTORS Contents CONTENTS About us.... 04 Products Line.... 06 Configure your product.... 08 Aluminibeta

More information

Variable displacement axial piston pumps,

Variable displacement axial piston pumps, Variable displacement axial piston pumps, Edition: 04/04.2000 Replaces: 04/10.99 DISPLACEMENTS From To PRESSURE Max. continuous Max. intermittent Max. peak 29 cm 3 /rev 73 cm 3 /rev 280 bar 315 bar 350

More information