Transcription

1 WARNING!! The attached Gold Medal Manual is for reference only and is not intended for any other purpose. The information contained in these on line manuals is subject to change at any time. Improvements are always being made to Gold Medal equipment and this information may not be the latest available for your purposes. It is critical that you call Gold Medal Products technical service department at for any questions about machine operations, replacement parts, or any service questions. Neither Gold Medal nor Phil Erb Concessions represent that these on line manuals contain the most current information available for the product represented.

2 Customer Side Operator Side

3 Model 2212 Mega Pop 12/14 oz. Unimaxx Model 2214 Red Top 12 12/14 oz. Unimaxx With the exception of the lighted dome on the Model 2214ST, all service parts are common between models 2212, 2213, 2214, and 2214ST Model 2213 Gay 90s Mega Pop 12/14 oz. Unimaxx 2

4 Table of Contents I. Safety Precautions. 4 II. Installation Instructions... 5 III. Operating Instructions 6-7 IV. Cleaning Instructions V. Maintenance Instructions.. 9 Troubleshooting Ordering Spare Parts.. 11 VI. System Parts Location Section Cabinet Breakdown Cabinet Interior Ceiling Dome Assembly (2024ST only) & Door Hardware Kettle Shell Components Lid and Agitator Assembly Unimaxx 12/14 oz Kettle Specification Motor Plate Assembly. 18 VII. Electrical Schematic.. 19 VIII. Warranty

5 4

6 5

7 Turns on all the lights, interior and dome, on your popcorn machine, and operates the elements for the heated corn pan. Operates the heating elements in the popping kettl Operates the kettle agitator motor. 6

8 7

9 8

10 9

11 10

12 ORDERING SPARE PARTS 11

13 Cabinet Breakdown Hanger Arm Front p/n Hanger Arm Rear, Assy. p/n /14 oz Unimaxx Kettle Complete p/n /14 oz Unimaxx Kettle Complete p/n Bottom Corn Pan Assy. 120V p/n Crutch Tip (4) p/n Kettle Receptacle 15A Twist Lock p/n Kettle Plug 15A Twist Lock p/n Kettle Lead Assy. p/n Connector 90 Degree p/n Dome Welded, St. Stl. p/n Hardware Kits for Doors (See p. 14) p/n (LH) p/n (RH) Door, Plexiglas (2) p/n (predrilled) For Model 2213, use p/n (These doors DO NOT come predrilled for hardware) Drop Panel p/n Lead-In Cord 15 Amp Plug p/n Glide (4) p/n Old Maid Pan p/n 47003

14 Cabinet Interior Ceiling Components Switch, Lighted Rocker Gr (3) p/n Rocker Switch Box 3 Hole p/n x 3/16 Set Screw for Spur Gear (2) p/n Spur Gear (2) p/n Hanger Arm Front p/n Reflector Flood 65W p/n Magnetic Catch Bracket p/n Magnetic Catch p/n Gear Block Assy. p/n Hanger Arm Rear, Assy. p/n

15 Dome Reflector Assembly, 120V p/n Molded Plug, Warmer p/n Light Tube Holder p/n Light Tube p/n Complete Hardware Kit for LH Door p/n Dome Assembly (2214ST only) { } Light Ballast, 120V 60 Hz p/n Light Starter p/n Complete Hardware Kit for RH Door p/n Light Tube Holder Starter p/n Popcorn Sign p/n Door Hardware Kits 14

16 Kettle Shell Components Kettle Gasket p/n Kettle Integral Heater 12/14 p/n Kettle Shell p/n x ½ (4) Countersunk Phillips Flathead Screws p/n Block, Shell and Kettle (2) p/n (Secures Weld to Shell and Provides Anchor for Crossbar Thumbscrew) 15

17 Lid And Agitator Assy. Crossbar Assembly p/n Washer ¼ Internal Tooth (2) p/n Formed Lid-10 3/8 p/n Kettle Lid Rear p/n Thumb Screw (2) 1/4-20 x 1¼ p/n Needle Bearing p/n Spur Gear p/n Set Screw for Spur Gear x 3/16 p/n Set Collar (2) (Same above and below lid) p/n Dump Handle Assy. Includes Knob p/n Set Screw for Collar (2) 1/4-20 x 3/16 p/n Agitator Shaft Weldment p/n /16-18 x 3/8 Sq Hd Screw (2) p/n Woodruff Key #3 1/8 x 1/2 p/n Dump Handle p/n Knob Dump Handle p/n Also available as p/n for order as a complete assembly, shown at left in side view with lids lifted and Stir Rod and Agitator Weight visible. Agitator Weight p/n Stir Rod p/n Lid and Agitator Assembly 16

18 UNIMAXX 12/14 OZ KETTLE PART NUMBER P/N V P/N 58220EX - 230V LID AND AGITATOR PARTS DESCRIPTION QTY PART NUMBER DESCRIPTION DUMP HANDLE V KETTLE W/ELEMENTS KNOB FOR DUMP HANDLE EX 230V KETTLE W/ELEMENTS DUMP HANDLE SCREW KETTLE SHELL WOODRUFF KEY KETTLE GASKET REAR KETTLE LID THERMOSTAT SHUNT BAR FRONT KETTLE LID F THERMOSTAT SET SCREW FOR COLLAR F THERMOSTAT CLAMP COLLAR NUTS FOR THERMOSTATS CROSSBAR ASSEMBLY KETTLE LEAD ASSEMBLY BUSHING FOR CROSSBAR METAL FLEX CONDUIT STIR ROD AGITATOR SHAFT SPUR GEAR NEEDLE BEARING RETAINING RING FOR BRG WEIGHT FOR STIR ROD /4" X 1 1/4" THUMB SCREW 2 KETTLE PARTS WASHER FOR THUMB SCREW TAP BLOCK 2 ISSUED 1/16/08 #8 SCREW FOR TAP BLOCK 4 17 QTY

19 Molded Receptacle, Warmer p/n Terminal Block, 8 Terminal p/n Rocker Switch Box 3 Hole p/n Lamp Holder p/n Switch, Lighted Rocker Gr (3) p/n Motor Plate Assembly Kettle Drive Motor, 120V p/n Kettle Receptacle 15A Twist Lock p/n

20 Electrical Schematic 19

21 WARRANTY WE WARRANT to the original purchaser the Gold Medal equipment sold by us to be free from defects in material or workmanship under normal use and service. Our obligation under this warranty shall be limited to the repair or replacement of any defective part for a period of six (6) months from the date of sale to the Original Purchaser with regard to labor and two (2) years with regard to parts and does not cover damage to the equipment caused by accident, alteration, improper use, voltage, abuse, or failure to follow instructions. THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES EXPRESSED OR IMPLIED, AND OF ALL OTHER OBLIGATIONS OR LIABILITIES ON OUR PART, INCLUDING THE IMPLIED WARRANTY OF MERCHANTIBILITY. THERE ARE NO WARRANTIES WHICH EXTEND BEYOND THE DESCRIPTION ON THE FACE HEREOF. We neither assume, nor authorize any other person to assume for us, any other obligation or liability in connection with the sale of said GOLD MEDAL equipment or any part thereof. The term Original Purchaser as used in this warranty shall be deemed to mean that person, firm, association, or corporation who was billed by the GOLD MEDAL PRODUCTS COMPANY, or their authorized distributor for the equipment. THIS WARRANTY HAS NO EFFECT AND IS VOID UNLESS THE ORIGINAL PURCHASER FIRST CALLS GOLD MEDAL PRODUCTS COMPANY AT TO DISCUSS WITH OUR SERVICE REPRESENTATIVE THE EQUIPMENT PROBLEM, AND, IF NECESSARY, FOR INSTRUCTIONS CONCERNING THE REPAIR OR REPLACEMENT OF PARTS. NOTE: This equipment is manufactured and sold for commercial use only. GOLD MEDAL PRODUCTS COMPANY Medallion Drive Cincinnati, Ohio USA Phone: Fax: The text, descriptions, graphics and other material in this publication are the proprietary and exclusive property of Gold Medal Products Company and shall not be used, copied, reproduced, reprinted or published in any fashion, including website display, without its express written consent. 20