INSTRUCTION MANUAL L WIND CONE

Save this PDF as:
 WORD  PNG  TXT  JPG

Size: px
Start display at page:

Download "INSTRUCTION MANUAL L WIND CONE"

Transcription

1 Cooper Industries DOCUMENT September 29, 2009 Revision B Crouse-Hinds Division Crouse-Hinds Airport Lighting Products 1200 Kennedy Road Windsor, CT Fax Title: INSTRUCTION MANUAL L WIND CONE SERIES WC-36 Copyright 2009 Cooper Technologies Company

2 REV. DESCRIPTION LTR. CHK. APV A Revised Para 4.1 was 69 watt; Para 4.2 was four 150 watt 120 volt PAR-38 lamps #150PAR/FL-120 and for RF 200 watt, 200A/99CL ; Para 6.1, power requirements for WC-36 was 716W at 120 volts (6 amps); Updated Figures per latest Manufacturing A /3/04 GFR B Added P/N for item 87, and for item 88; Revised Copyright to A /29/09 ii

3 LIMITED PRODUCT WARRANTY THE FOLLOWING WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT NOT BY WAY OF LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE. Crouse-Hinds Airport Lighting Products (the Company ) warrants to each original Buyer of Products manufactured by the Company that such Products are, at the time of delivery to the Buyer, free of material and workmanship defects, provided that no warranty is made with respect to: (a) (b) (c) (d) any Product which has been repaired or altered in such a way, in Company's judgment, as to affect the Product adversely; any Product which has, in Company's judgment, been subject to negligence, accident or improper storage; any Product which has not been operated and maintained in accordance with normal practice and in conformity with recommendations and published specification of Company; and, any Products, component parts or accessories manufactured by others but supplied by Company (any claims should be submitted directly to the manufacturer thereof). Crouse-Hinds Airport Lighting Products obligation under this warranty is limited to use reasonable efforts to repair or, at its option, replace, during normal business hours at any authorized service facility of Company, any Products which in its judgment proved not to be as warranted within the applicable warranty period. All costs of transportation of Products claimed not to be as warranted and of repaired or replacement Products to or from such service facility shall be borne by Purchaser. Company may require the return of any Product claimed not to be as warranted to one of its facilities as designed by Company, transportation prepaid by Purchaser, to establish a claim under this warranty. The cost of labor for installing a repaired or replacement product shall be borne by Purchaser. Replacement parts provided warranty period of the Products upon which they are installed to the same extent as if such parts were original components thereof. Warranty services provided under the Agreement do not assure uninterrupted operations of Products; Company does not assume any liability for damages caused by any delays involving warranty service. The warranty period for the Products is 24 months from date of shipment or 12 months from date of first use whichever occurs first. iii

4 SAFETY NOTICES This equipment is normally used or connected to circuits that may employ voltages which are dangerous and may be fatal if accidentally contacted by operating or maintenance personnel. Extreme caution should be exercised when working with this equipment. While practical safety precautions have been incorporated in this equipment, the following rules must be strictly observed: KEEP AWAY FROM LIVE CIRCUITS Operating and maintenance personnel must at all times observe all safety regulations. DO NOT PERFORM MAINTENANCE ON INTERNAL COMPONENTS OR RE-LAMP WITH POWER ON. RESUSCITATION Maintenance personnel should familiarize themselves with the technique for resuscitation found in widely published manuals of first aid instructions. iv

5 Table of Contents Title Page... i Revision Page... ii Limited Product Warranty... iii Safety Notices... iv Table of Contents... v 1.0 General Information Wind Cone Assembly Hinged Standard Lamps Required Installation Wiring Painting Lubrication Maintenance Parts Figures Figure 1 Foundation Details Figure 2 Base Dimensions Figure 3 Standard Illuminated Wind Cone Pole Assy (48310)... 8 Figure 4 Position of Hinged Pole Lowered for Servicing... 9 Figure 5 -RF Option (Reflector Floodlights) Figure 6 Obstruction Light Only (48312) Figure 7 Floodlights Only (48313) Figure 8 Non-Illuminated (48311) Figure 9 Bearing Assembly Figure 10 Wind Cone Basket Assembly Figure 11 Wiring Diagram v

6 1.0 GENERAL INFORMATION 1.1 General Description This bulletin covers instructions for the wind cone fixture which is constructed in accordance with FAA Specification L-807. It consists of a two piece shaft assembly, a reducer, two bearing supports, a cylindrical framework, a fabric cone, a lighting fixture assembly to illuminate the cone and an obstruction light. The wind cone standard is a hinged pole constructed so that the wind cone fixture assembly can be lowered to the ground for servicing. 2.0 WIND CONE ASSEMBLY 2.1 The WC-36 wind cone assembly as illustrated, includes all parts above the hinged standard. The assembly is shipped in knocked down form. 2.2 The top vertical shaft is a one inch pipe that is attached to the 1 ½ bottom sections by means of a reducer fitting. The junction box at top has a hub cover on which the obstruction light with a red globe can be mounted by use of a nipple. The cylindrical framework is attached to two ball bearing assemblies that are installed on the lower vertical shaft. The fabric cone is drawn over this framework and held in place by an outer clamp ring. Grease fittings are provided for lubricating the bearings. 2.3 The standard fabric cone is orange nylon but cones are also available in white nylon. 3.0 HINGED STANDARD 3.1 Hinged standard (Cat. No ) consists of an upper and lower section hinged together to allow the upper section to be lowered to the ground for servicing of the wind cone assembly. The standard is welded steel construction having one coat of red oxide primer. 3.2 Four anchor bolts each having two nuts and washers are included in the package. The hinged standard is locked in the upright position by use of a stud and nut. 4.0 LAMPS REQUIRED 4.1 For the obstruction light: One 116 watt 120 volt medium base A-21 lamp, traffic signal type. 4.2 For cone illuminating floodlights: Four 250 watt 120 volt PAR-38 lamps, Crouse-Hinds Airport Lighting Products P/N Lamps and Lamp Holders are to be adjusted for a 45 angle off the vertical (see Figures 3 and 7). 4.3 For optional 120 VAC RF reflector floodlights use four 150 watt 120 volt medium base general service lamps #150/CL or for 220/240 VAC, four 200 watt, volt lamps, Crouse-Hinds Airport Lighting Products P/N

7 5.0 INSTALLATION 5.1 A concrete foundation with material strength and dimensions that will fulfill the requirements presented by the local soil conditions must be provided. The four anchor bolts, each with two nuts and washers, that are provided must be installed in the foundation on an 11 inch bolt circle and have four inches of the bolt above the concrete as shown in the illustrations. A one inch conduit may also be installed in this base to bring underground wiring into the center of the pole. 5.2 An access hole with cover in the side of the pole has been provided to make wiring easier. An earth ground nut is located under the cover. A piece of flexible conduit is located inside the pole at the hinge point. The internal wiring should be pulled through the flex conduit to prevent damage to the wire insulation when the pole is lowered. Be sure to allow approximately two feet of slack wire to avoid tension on wire connections. Be sure to check the actual current flow when the installation is complete. Then check to be sure the circuit breaker (or other device) protecting the wind cone lighting is of the proper rating. See National Electric Code and section 6 Wiring. 5.3 Before installing the hinged pole put one nut on each anchor bolt and tighten them down to rest on the concrete. Using a level adjust these nuts just enough to have them all level with each other. Put one washer on each nut. Then install hinged standard over the bolts and washers and tighten second washers and nuts on bolts only finger tight. Check standard to be sure it is exactly vertical (plumb). Adjustments can be made by turning the BOTTOM nuts. After the standard is plumb tighten top nuts securely. When installation is checked and completed, fill any void between base plate and foundation with non-shrinking grout, shaping and finishing it to a neat appearance. 5.4 Assemble the wind cone assembly beginning with the 1 ½ lower shaft, reducer, 1 upper shaft and junction box. Install the four lamp holders, junction box cover and obstruction light, if ordered. Assembly the cylindrical framework and attach it to the two bearings on the shaft. The fabric wind sock cone is then drawn over the framework and held by tightening the clamping ring over the inner end of the cone. 5.5 For the RF option, install the four ½ pipe arms, the four reflectors, junction box cover and obstruction light if ordered. Assemble the cylindrical framework and attach it to the two bearings on the shaft. The fabric wind sock cone is assembled as above. See Figures 3, 4, 5, 6, 7, 8, 9, and When installing wind cone assembly in slip fitter at top of center pipe support, align clearance holes through wind cone pipe at correct locations so that two set screws will project through pipe (see Figure 9) (before proceeding with installation, refer to Paragraph 6, Wiring.) Tighten remaining set screws, locking them in place. 6.0 WIRING 6.1 Power required for the WC-36 is 1,116 watts 120 volts. Wiring is run underground, up through the foundation, inside the hinged standard, and inside the center shaft of the WC-36. In the hinged standard and the WC-36 shaft assembly #12 or #14 Type RHW or THW wire may be used. 2

8 At the hinge point the wires are run through flexible tubing. Splices may be made in the junction box at the top to run 120 volts to the four lamp holders and to the obstruction light. Power required for the lighting on the wind cone is 2-wire, 115-volt or volt, AC or DC. Voltage drop from the transformer vault to the wind cone should be held within 5% of the line voltage by using wire of sufficient size. If the wire run from the transformer vault to the wind cone is exceptionally long, it may be more economical to utilize wires of a smaller size with a voltage booster transformer such as 1.0 KW transformer, outdoor weatherproof type Catalog No , See Figure 10. WC-36 is 1,116W at 120V (9.5 amps) or 900W at V (4 amps). 7.0 PAINTING 7.1 The finish required under FAA Installation Specification AC 150/ , Item L-107 consists of three coats (prime, body and finish coats) applied to all exposed parts except cone, red globe and the four lampholders. 7.2 The prime coat shall be red oxide type. The body and finish coats shall be equipment orange. A primer coat is applied to the hinged standard at the factory. Apply the two final coats after installation. 8.0 LUBRICATION 8.1 The wind cone bearings are factory lubricated. Approximately once a year lubricate the bearings (each bearing housing is provided with grease fitting) with Exxon Beacon #325 Grease, or equivalent low temperature high quality silicone grease. Note: Local environmental conditions may require more frequent lubrication. 9.0 MAINTENANCE PARTS 9.1 See pages 4 and 5. 3

9 4

10 5

11 6

12 7

13 8

14 9

15 10

16 11

17 12

18 13

19 14

20 15

21 16

22 CAUTION: If at any time the wind cone does not rotate freely (in a 3 MPH or higher wind), thoroughly clean and relubricate the bearings. If the bearings are worn, so that there is binding at any point, replace both bearings immediately. All statements, technical information and recommendation contained herein are based on information and tests we believe to be reliable. The accuracy or completeness thereof are not guaranteed. In accordance with Crouse-Hinds Standard Aviation Products Terms and Condition of Sale, and since conditions of use are outside our control, the purchaser should determine the suitability of the product for the intended use and assumes all risk and liability whatsoever in connection herewith. 17

INSTALLATION INSTRUCTIONS AND PARTS LIST SUPPLEMENTAL WIND CONE FIXTURE FAA L-806 PART NUMBER LIGHTED PART NUMBER UNLIGHTED

INSTALLATION INSTRUCTIONS AND PARTS LIST SUPPLEMENTAL WIND CONE FIXTURE FAA L-806 PART NUMBER LIGHTED PART NUMBER UNLIGHTED Cooper Industries Crouse-Hinds Division Crouse-Hinds Airport Lighting Products 1200 Kennedy Road Windsor, CT 06095 860 683-4300 Fax 860 683-4354 DOCUMENT 8512 May 3, 2004 Revision B Title: INSTALLATION

More information

Instruction Manual. Model 5 Single Lamp Style III Taxiway Centerline Light (TCL) L-852A & C Pro-III In-pavement Single Lamp Fixture

Instruction Manual. Model 5 Single Lamp Style III Taxiway Centerline Light (TCL) L-852A & C Pro-III In-pavement Single Lamp Fixture REVISION C August 12, 2010 Model 5 Single Lamp Style III Taxiway Centerline Light (TCL) L-852A & C Pro-III In-pavement Single Lamp Fixture Cooper Industries Crouse-Hinds Division Airport Lighting Products

More information

Manufacturing Facility is ISO9001:2000. Welded Steel Pipe Conform to ASTM A53. Threads Conform to ASME B1.20.1

Manufacturing Facility is ISO9001:2000. Welded Steel Pipe Conform to ASTM A53. Threads Conform to ASME B1.20.1 STEEL NIPPLES S40 & S80 Steel Nipple Product Specifications Manufacturing Facility is ISO9001:2000 Welded Steel Pipe Conform to ASTM A53 Threads Conform to ASME B1.20.1 800-678-2544 800-678-0857 www.msi-products.com

More information

INDOOR LED BAR DIGIT HOCKEY SCOREBOARD INSTRUCTION MANUAL REVISION DATE: PART#:

INDOOR LED BAR DIGIT HOCKEY SCOREBOARD INSTRUCTION MANUAL REVISION DATE: PART#: INDOOR LED BAR DIGIT HOCKEY SCOREBOARD INSTRUCTION MANUAL REVISION DATE: 02-02-09 PART#: 98-0006-05 SERVICE & CUSTOMER INFORMATION CUSTOMER MUST HAVE PART NUMBER WHEN ORDERING ITEMS THROUGH THE SERVICE

More information

Model LA 4300 Time Delay OFF Controller

Model LA 4300 Time Delay OFF Controller ISIMET LA Series Model LA 4300 Time Delay OFF Controller Installation, Operation and Maintenance Manual Application: The Time Delay OFF Controller operates as a single output controller where the application

More information

400 Watt WIND TURBINE

400 Watt WIND TURBINE 400 Watt WIND TURBINE User s Manual Congratulations on your Coleman solar product purchase. This product is designed to the highest technical specifications and standards. It will supply years of maintenance

More information

Part No DROP IN POPCORN WARMERS Instruction Manual Model #2343, 2344, 2345

Part No DROP IN POPCORN WARMERS Instruction Manual Model #2343, 2344, 2345 Part No. 39406 DROP IN POPCORN WARMERS Instruction Manual Model #2343, 2344, 2345 SAFETY PRECAUTIONS 2 INSTALLATION INSTRUCTIONS Inspection of Shipment: Unpack all cartons and check thoroughly for any

More information

EASY CONNECT CRANE KIT Festoon Conductor Systems

EASY CONNECT CRANE KIT Festoon Conductor Systems ASSEMBLY INSTRUCTION MANUAL EASY CONNECT CRANE KIT Festoon Conductor Systems October, 2005 Copyright 2005, Yale Lift-Tech, division of Columbus McKinnon Corporation Part No. 117463-05 Mounting Instructions

More information

Models CMXC-SB, PMXC-SB, and WMXC Series Installation Manual for Optional Fixture Mounts

Models CMXC-SB, PMXC-SB, and WMXC Series Installation Manual for Optional Fixture Mounts Models CMXC-SB, PMXC-SB, and WMXC Series Installation Manual for Optional Fixture Mounts 25500050A REV. A 413 Printed in U.S.A. Warranty Seller warrants all goods for five years on parts and 2-1/2 years

More information

Safety Sentry Electronic Breakaway Switch

Safety Sentry Electronic Breakaway Switch Safety Sentry Electronic Breakaway Switch P-616-WE 819-0454 Installation Instructions An Altra Industrial Motion Company Parts List Mounting hardware included with the Safety Sentry Breakaway Switch kit:

More information

Heavy Duty Front-Drive Steer Axles MX-140 and MX-160 Series

Heavy Duty Front-Drive Steer Axles MX-140 and MX-160 Series Revised 11/2009 Heavy Duty Front-Drive Steer Axles MX-140 and MX-160 Series Catalog PB-0349 Strength Power Speed Agility MERITOR PARTS. RIGHT FROM THE START. TABLE OF CONTENTS MX-17/19/21-140 and MX-21/23-160

More information

WARNING!! The attached Gold Medal Manual is for reference only and is not intended for any other purpose. The information contained in these on line manuals is subject to change at any time. Improvements

More information

Saf-T-Bar Conductor Bar T Series

Saf-T-Bar Conductor Bar T Series Saf-T-Bar Conductor Bar T Series P/N 964001 2012.04.12 Rev. 6 SERIES T SAF-T-BAR CONDUCTOR BAR 1 Conductix Incorporated The technical data and images which appear in this manual are for informational purposes

More information

LED Downlight Ceiling Fixtures

LED Downlight Ceiling Fixtures ED Downlight Ceiling Fixtures Every attempt has been made to ensure that this documentation is as accurate and up-to-date as possible. However, Vertical Express assumes no liability for consequences, directly

More information

DeZURIK KUL KNIFE GATE VALVES

DeZURIK KUL KNIFE GATE VALVES KUL KNIFE GATE VALVES Instruction D11025 September 2013 Instructions These instructions are intended for personnel who are responsible for the installation, operation and maintenance of your KUL knife

More information

INSPECTOR LINE LOAD SIMULATOR INSTRUCTION MANUAL TASCO, INC.

INSPECTOR LINE LOAD SIMULATOR INSTRUCTION MANUAL TASCO, INC. INSPECTOR LINE LOAD SIMULATOR INSTRUCTION MANUAL INS120P TASCO, INC. THIS TESTER IS DESIGNED FOR USE ONLY BY QUALIFIED ELECTRICIANS. IMPORTANT SAFETY WARNINGS mwarning Read and understand this material

More information

ASSEMBLY OF TROLLEY TO HOIST

ASSEMBLY OF TROLLEY TO HOIST INSTRUCTIONS AND PARTS LIST RIGID MOUNT I-BEAM AND PATENTED TRACK TROLLEYS (PUSH & HAND GEARED - 1/2 THRU 15 TON RATED LOADS) GENERAL Yale Rigid Mount I-Beam Trolleys are designed especially for use on

More information

Part# Accessory Power Distribution Module

Part# Accessory Power Distribution Module 7 February 2006 Power Pod (1038800) Page 1 BD Powe r Pod Installation Instructions Part# 1038800 Accessory Power Distribution Module Power Pod Specifications: Eliminate multiple T-taps and splices on OEM

More information

A48 / A48B (base plate) BATTERY CHARGER

A48 / A48B (base plate) BATTERY CHARGER A48 / A48B (base plate) BATTERY CHARGER CPN41054 ISSUE DATE: 12315-8/98 ECN/DATE 106 BRADROCK DRIVE DES PLAINES, IL. 60018-1967 (847) 299-1188 FAX: (847)299-3061 15349-07-07/02 16041 6/03 14575-2/01 INSTRUCTION

More information

Instruction Manual For Baldor Buffers

Instruction Manual For Baldor Buffers No. 280F Replaces 280E LB7011 Instruction Manual For Baldor Buffers SAFETY NOTICE: WARNING statements describe conditions that may lead to personnel injury including potentially fatal injuries if the machine

More information

ROTARY BRUSH CUTTERS THE LEADER OF THE PACK OWNER/OPERATOR SAFETY & INSTRUCTION MANUAL

ROTARY BRUSH CUTTERS THE LEADER OF THE PACK OWNER/OPERATOR SAFETY & INSTRUCTION MANUAL 72 M-AX ROTARY BRUSH CUTTERS THE LEADER OF THE PACK OWNER/OPERATOR SAFETY & INSTRUCTION MANUAL CONTENTS Page 1. Introduction..................................2 2. Safety Instructions...........................3-4

More information

Countertop B.I.B. Butter Dispenser Instruction Manual Model #2496

Countertop B.I.B. Butter Dispenser Instruction Manual Model #2496 Part No. 39177 Countertop B.I.B. Butter Dispenser Instruction Manual Cincinnati, OH 45241-4807 USA SAFETY PRECAUTIONS Installation Instructions Countertop B.I.B. Checking Shipment Unpack all cartons and

More information

Installation Instructions

Installation Instructions Nov 25, 2013 Upper Control Arms Installation Instructions The following instructions are intended for professional installers and are guidelines only. Speedtech Performance assumes NO responsibility for

More information

INSTRUCTIONS TUBULAR CONTROL ARMS & COIL-OVER CONVERSION FOR AMC MUSCLE CARS: 1970 AMX JAVELIN SPIRIT, HORNET, GREMLIN, CONCORD

INSTRUCTIONS TUBULAR CONTROL ARMS & COIL-OVER CONVERSION FOR AMC MUSCLE CARS: 1970 AMX JAVELIN SPIRIT, HORNET, GREMLIN, CONCORD AMC TUBULAR CONTROL ARMS & COIL OVER KIT INSTRUCTIONS TUBULAR CONTROL ARMS & COIL-OVER CONVERSION FOR AMC MUSCLE CARS: 1970 AMX 1970-74 JAVELIN SPIRIT, HORNET, GREMLIN, CONCORD Revised 6/1/2012 www.freakride.com

More information

Export Bucket Pump Instruction Manual Models: 2114XE & 2114XD

Export Bucket Pump Instruction Manual Models: 2114XE & 2114XD Part No. 79064XE Revised: August 2006 Export Bucket Pump Instruction Manual Cincinnati, OH 45241 USA SAFETY PRECAUTIONS INTRODUCTION This manual provides instruction for installation and operation of the

More information

4" ENVIRONMENTAL E-SERIES PUMPS OWNER'S MANUAL. DANGER warns about hazards that will cause. WARNING warns about hazards that can cause

4 ENVIRONMENTAL E-SERIES PUMPS OWNER'S MANUAL. DANGER warns about hazards that will cause. WARNING warns about hazards that can cause 4" ENVIRONMENTAL E-SERIES PUMPS OWNER'S MANUAL BEFORE INSTALLING PUMP, BE SURE TO READ THIS OWNER S MANUAL CAREFULLY. CAUTION Fill pump with water before starting or pump will be damaged. The motor on

More information

INSTALLATION, CALIBRATION & TROUBLESHOOTING MANUAL

INSTALLATION, CALIBRATION & TROUBLESHOOTING MANUAL INSTALLATION, CALIBRATION & TROUBLESHOOTING MANUAL Model 7200 Transducers GP:50 2770 Long Road, Grand Island, NY 14072 Tel: 716-773-9300 Fax: 716-773-5019 Email: sales@gp50.com Website: http://www.gp50.com

More information

TERMS OF USE TERMS AND CONDITIONS. Plumbing and Heating Products (PL-WR)

TERMS OF USE TERMS AND CONDITIONS. Plumbing and Heating Products (PL-WR) TERMS OF USE 1. Watts pricing and product data is subject to change without notice and such changes supersede all previous versions. 2. Watts data is to be used as provided. Watts is not responsible for

More information

OUTDOOR TABLE TENNIS TABLE ASSEMBLY INSTRUCTIONS

OUTDOOR TABLE TENNIS TABLE ASSEMBLY INSTRUCTIONS OUTDOOR TABLE TENNIS TABLE ASSEMBLY INSTRUCTIONS Please Do Not Hesitate to Contact Our Consumer Hotline at 800-759-0977 with Any Questions That May Arise During Assembly or Use of This Product! NG2336P

More information

Adjustable Angled Incline Conveyor Owners Manual with Operating Instructions

Adjustable Angled Incline Conveyor Owners Manual with Operating Instructions Adjustable Angled Incline Conveyor Owners Manual with Operating Instructions Revision 012211 Table of Contents Basic Conveyor Features 3 Getting Started 4 Setting Up the Incline Conveyor 5 Belt Removal

More information

Installation, Operation and Maintenance of Airflex Model AA2, B2, B3 and C2 Rotorseals

Installation, Operation and Maintenance of Airflex Model AA2, B2, B3 and C2 Rotorseals RS 9010 Warning Forward this manual to the person responsible for Installation, Operation and Maintenance of the product described herein. Without access to this information, faulty Installation, Operation

More information

Inline & 90 Live Swivels Fax:

Inline & 90 Live Swivels Fax: Inline & 90 Live Swivels www.superswivels.com 763-784-5531 Email: sales@superswivels.com Fax: 763-784-7423 CW1602 Super Swivels was established in 1986. Our goal is to manufacture heavy-duty, leak free,

More information

Automatic Butter Dispenser Instruction Manual Model #2395NS

Automatic Butter Dispenser Instruction Manual Model #2395NS Automatic Butter Dispenser Instruction Manual Part No. 39642 Revised: July 2006 Cincinnati, OH 45241 USA Safety Precautions Automatic Butter Dispenser 2 INTRODUCTION Automatic Butter Dispenser This manual

More information

OWNER'S MANUAL BOAT TRAILER WINCH. 12 Volt Powered Winch Power-In / Power-Out Operation Hand Held Wired Remote Control. Model 915

OWNER'S MANUAL BOAT TRAILER WINCH. 12 Volt Powered Winch Power-In / Power-Out Operation Hand Held Wired Remote Control. Model 915 OWNER'S MANUAL Model 915 BOAT TRAILER WINCH Setup with double line pull (pulley block) pw915101 12 Volt Powered Winch Power-In / Power-Out Operation Hand Held Wired Remote Control P7040104r2 Printed in

More information

II DISTRIBUTION & SUBSTATION TYPE C

II DISTRIBUTION & SUBSTATION TYPE C CapCheckIII DISTRIBUTION & SUBSTATION TYPE Ca p a c i t o r C h e c ke r Operating & Instruction Manual 1475 Lakeside Drive Waukegan, Illinois 60085 U.S.A. 847.473.4980 f a x 8 4 7. 4 7 3. 4 9 8 1 w e

More information

INSTALLATION GUIDE. Universal System for Zero Turn Mowers

INSTALLATION GUIDE. Universal System for Zero Turn Mowers INSTALLATION GUIDE Universal System for Zero Turn Mowers Table of Contents General Information 1 Important Notice to Purchaser 2 Specifications 2 Intended Usage 2 Important Information 3 General Safety

More information

Smith & Hawken Propane Tank Cover dpci # stock # ZAZ15200T

Smith & Hawken Propane Tank Cover dpci # stock # ZAZ15200T Smith & Hawken Propane Tank Cover dpci # 009-07-0775 stock # ZAZ15200T >> assembly instructions THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.

More information

HYDRAULIC POWER PACK

HYDRAULIC POWER PACK HYDRAULIC POWER PACK OPERATION & MAINTENANCE MANUAL Model 34484 Copyright 2012 by All rights reserved. No part of this publication may be copied, reproduced or transmitted in any form whatsoever without

More information

MODEL 5500 Tire Repair Station

MODEL 5500 Tire Repair Station MODEL 5500 Tire Repair Station Installation, Operation and Repair Parts Information Branick Industries, Inc. 4245 Main Ave P.O. Box 1937 Fargo, North Dakota 58103 P/N: 81-0047C TABLE OF CONTENTS SAFETY

More information

UV DISINFECTION UNIT MODEL 3G

UV DISINFECTION UNIT MODEL 3G SALCOR INC. P. O. Box 1090 Fallbrook, CA 92088-1090 Telephone: (760) 731-0745 Fax: (760) 731-2405 INSTALLATION MANUAL UV DISINFECTION UNIT MODEL 3G February, 2011 I. INSTALLATION INSTRUCTIONS WARNING!

More information

Tissue Master. User Manual

Tissue Master. User Manual Tissue Master User Manual This page left blank intentionally This manual is a guide for the use of the Omni International Tissue Master and accessories. Data herein has been verified and validated. It

More information

OWNER S MANUAL EVOLUTION 3500, 4500, 5500, & 8500 SERIES PUMPS

OWNER S MANUAL EVOLUTION 3500, 4500, 5500, & 8500 SERIES PUMPS OWNER S MANUAL EVOLUTION 3500, 4500, 5500, & 8500 SERIES PUMPS IMPORTANT SAFETY INSTRUCTIONS When installing and using this electrical equipment, basic safety precautions should always be followed, including

More information

Compressor Clutch Replacement Procedure

Compressor Clutch Replacement Procedure P-1411 819-0361 Compressor Clutch Replacement Procedure Installation Instructions World Clutch with Unidamp Armature for Ford FX-15 and FS-10 Compressors and all Denso Models with 30mm bearing fit. Keep

More information

For technical questions and replacement parts, please call

For technical questions and replacement parts, please call Digital CLAMP MULTIMETER 42396 95652 OPERATING INSTRUCTIONS Due to continuing improvements, actual product may differ slightly from the product described herein. 3491 Mission Oaks Blvd., Camarillo, CA

More information

Air Compressor. Owner s Manual. Sonny's Enterprises, Inc Hiatus Road Tamarac, Florida v1

Air Compressor. Owner s Manual. Sonny's Enterprises, Inc Hiatus Road Tamarac, Florida v1 Owner s Manual Sonny's Enterprises, Inc. 5605 Hiatus Road Tamarac, Florida 33321 16v1 *Table of Contents* WARNING *SAFETY REQUIREMENTS* WARNING... 3 *INTRODUCTION*... 5 Product Specifications... 6 Optional

More information

Service & Installation Instructions. An Altra Industrial Motion Company P WE Vented. Enclosed Version Optional

Service & Installation Instructions. An Altra Industrial Motion Company P WE Vented. Enclosed Version Optional Gen 2 Electro-Module EM-50, EM-100, EM-180 Electrically Released Permanent Magnet Brake Module EM-50-20FBB, EM-100-20FBB, EM-180-20FBB EM-50-20FBC, EM-100-20FBC, EM-180-20FBC P-273-5-WE 819-0529 Service

More information

Power Lift & Recline Chair and Power Recline Only Chair

Power Lift & Recline Chair and Power Recline Only Chair Power Lift & Recline Chair and Power Recline Only Chair OWNER S MANUAL AND LIMITED LIFETIME WARRANTY UC540 Large Power Lift and Recline UC551 Large Power Recline Proudly Manufactured in the USA 401 Bridge

More information

Toll Free C5 & C4 Brake Bracket Installation Instructions

Toll Free C5 & C4 Brake Bracket Installation Instructions Toll Free -888-467-65 www.speedtech-performance.com C5 & C4 Brake Bracket Installation Instructions Installation Instructions: Disclaimer All parts should be installed by a certified mechanic if you choose

More information

Preassembled Clutch/Electrically Released Brake Module

Preassembled Clutch/Electrically Released Brake Module Preassembled Clutch/Electrically Released Brake Module P-273-2-WE 819-0346 Installation Instructions An Altra Industrial Motion Company Contents Introduction... 2 Mounting to a Motor... 3 Mounting to a

More information

Preassembled Clutch/Brake Module

Preassembled Clutch/Brake Module Preassembled Clutch/Brake Module P-273-1-WE 819-0343 Installation Instructions An Altra Industrial Motion Company Contents MountingtoaMotor...3 Mounting to a Reducer.............3 Installing the Base Mount...........4

More information

DISCONTINUED VERSION Parts listed in this catalog may no longer be available. ILLUSTRATED PARTS CATALOG

DISCONTINUED VERSION Parts listed in this catalog may no longer be available. ILLUSTRATED PARTS CATALOG BUNN COMBO BREWER DISCONTINUED VERSION Parts listed in this catalog may no longer be available. ILLUSTRATED PARTS CATALOG Designs, materials, weights, specifications, and dimensions for equipment or replacement

More information

SERIES 300V 115 and 230 VOLT AC FUEL TRANSFER PUMP Owner's Operation & Safety Manual Models FR300V, FR301V, FR310V & FR311V

SERIES 300V 115 and 230 VOLT AC FUEL TRANSFER PUMP Owner's Operation & Safety Manual Models FR300V, FR301V, FR310V & FR311V SERIES 300V 115 and 230 VOLT AC FUEL TRANSFER PUMP Owner's Operation & Safety Manual Models FR300V, FR301V, FR310V & FR311V SAFETY INSTRUCTIONS To ensure safe and effi cient operation, it is essential

More information

Nor East. Instructions Safety Messages. Inspection. Parts. DeZURIK Service. Type 05 Pneumatic Actuator Used With Globe Valves

Nor East. Instructions Safety Messages. Inspection. Parts. DeZURIK Service. Type 05 Pneumatic Actuator Used With Globe Valves Instructions Safety Messages These instructions are intended for personnel who are responsible for installation, operation and maintenance of your DeZURIK Actuator. All safety messages in the instructions

More information

WIRING DIAGRAMS FOR BRIDGE CONTROL PANELS

WIRING DIAGRAMS FOR BRIDGE CONTROL PANELS WIRING DIAGRAMS FOR BRIDGE CONTROL PANELS Bridge W/D's Panel Part # Page No. Nema-4/12 1-Speed 444231-** 2 Nema-4/12 1-Speed with Soft-Start 444711-** 3 Nema-4/12 2-Speed 444232-** 4 Nema-4/12 2-Speed

More information

Installation and Operation Instructions Evolution Series Light Bars (36-72 )

Installation and Operation Instructions Evolution Series Light Bars (36-72 ) Installation and Operation Instructions Evolution Series Light Bars (36-72 ) IMPORTANT! Read all instructions before installing and using. Installer: This manual must be delivered to the end user.! WARNING!

More information

Compressor Clutch Replacement Procedure

Compressor Clutch Replacement Procedure Clutch Replacement Procedure P-1401-WE 819-0316 Installation Instructions An Altra Industrial Motion Company Warner Replacement Clutches for the following compressors: Denso 6E171 10P15 6P148 6C17 Ford

More information

APCO ASR-400/450 SEWAGE AIR RELEASE VALVES

APCO ASR-400/450 SEWAGE AIR RELEASE VALVES APCO ASR-400/450 SEWAGE AIR RELEASE VALVES Instruction D12005 December 2012 Instructions These instructions provide installation, operation and maintenance information for the APCO ASR- 400/450 Sewage

More information

SIDE-WIND, A-FRAME TRAILER JACK. Model Due to continuing improvements, actual product may differ slightly from the product described herein.

SIDE-WIND, A-FRAME TRAILER JACK. Model Due to continuing improvements, actual product may differ slightly from the product described herein. SIDE-WIND, A-FRAME TRAILER JACK Model 95157 Assembly And Operation Instructions Due to continuing improvements, actual product may differ slightly from the product described herein. 3491 Mission Oaks Blvd.,

More information

COOPER POWER. SERIES ELF Current-Limiting Dropout Fuse Installation Instructions. Fusing Equipment MN132028EN. Pull ring. Housing

COOPER POWER. SERIES ELF Current-Limiting Dropout Fuse Installation Instructions. Fusing Equipment MN132028EN. Pull ring. Housing Fusing Equipment MN132028EN Effective November 2016 Supersedes June 2012 (S240-66-1) COOPER POWER SERIES ELF Current-Limiting Dropout Fuse Installation Instructions Pull ring Housing Lifting eye Identification

More information

OPERATING INSTRUCTIONS ZDX 1/12CS

OPERATING INSTRUCTIONS ZDX 1/12CS OPERATING INSTRUCTIONS ZDX 1/12CS www. sethco. com info@sethco.com INDEX Warranty 2 Safety Rules 3 Operating Instructio ns 4 General Description 4 Pre-installation 4 Pump Installation 4 Piping the Pump

More information

Stainless Steel Air Motor Conversion Kits

Stainless Steel Air Motor Conversion Kits Instructions Stainless Steel Air Motor Conversion Kits 096B Conversion Kit 650 For 00 Pumps Conversion Kit 65 For 590 Pumps Conversion Kit 65 For 50 Pumps Model 650 Model 65 Model 65 Graco Inc. P.O. Box

More information

VP-4124/VP-4124-E 24/48 VOLT DC SWITCHING POWER SUPPLY

VP-4124/VP-4124-E 24/48 VOLT DC SWITCHING POWER SUPPLY Issue 5 24/48 VOLT DC SWITCHING POWER SUPPLY INTRODUCTION These instructions provide the specifications, installation and maintenance information for the VP-4124 and VP-4124-E, 24/48 Volt Power Supplies.

More information

HS593 Feed Line Control Unit 230V Single Phase

HS593 Feed Line Control Unit 230V Single Phase HS593 Feed Line Control Unit 230V Single Phase General Installation Notes: Make sure that power is disconnected from system prior to servicing. Installation of this equipment and related OEM equipment

More information

Pneumatic Single Disc and Dual Disc Brakes P250 and P620

Pneumatic Single Disc and Dual Disc Brakes P250 and P620 P-208-WE SM318-gb-02/09 Pneumatic Single Disc and Dual Disc Brakes P20 and P20 Service Manual We, WARNER ELECTRIC EUROPE,, rue Champfleur, B.P. 2009, F-49182 St Barthélemy d Anjou Cedex declare that the

More information

User s Guide. EZ-Bar Livestock Scale WEIGH BARS AND DIGITAL INDICATOR. WB-40 Weigh Bars TS-700 WB Digital Indicator. Guide version 1.

User s Guide. EZ-Bar Livestock Scale WEIGH BARS AND DIGITAL INDICATOR. WB-40 Weigh Bars TS-700 WB Digital Indicator. Guide version 1. accurate around the world s i n c e 1 8 9 7 User s Guide EZ-Bar Livestock Scale WEIGH BARS AND DIGITAL INDICATOR WB-40 Weigh Bars TS-700 WB Digital Indicator Guide version 1.3 USER S GUIDE Table of Contents

More information

Spare Parts, Instruction and Maintenance Manual for SPANCO Model 301 Jib Cranes

Spare Parts, Instruction and Maintenance Manual for SPANCO Model 301 Jib Cranes Manual No. 103-0007 REV. 6/10 Spare Parts, Instruction and Maintenance Manual for SPANCO Model 301 Jib Cranes ISO 9001 REGISTERED SPANCO, Inc. 2 TABLE OF CONTENTS Forward... 4 Installation... 4-6 Maintenance...

More information

Strut Spring Compressor

Strut Spring Compressor Strut Spring Compressor Operating Instruction & Parts Manual Model Number Atd-7553 Model Atd-7553 Atd Tools Inc. 114 I-70 Trade Center Drive, St. Peters, MO 63376 Printed in Taiwan Save these instructions.

More information

LESTRONIC II BATTERY CHARGER MODEL 19740

LESTRONIC II BATTERY CHARGER MODEL 19740 *01679* LESTRONIC II BATTERY CHARGER MODEL 19740 PLEASE SAVE THESE IMPORTANT SAFETY AND OPERATING INSTRUCTIONS For correct operation of the equipment, it is important to read and be familiar with this

More information

DAP-625S and DAP-875S

DAP-625S and DAP-875S AIR CHAMP PRODUCTS DAP-625S and DAP-875S (i) FORM NO. L-20078-B-0501 In accordance with Nexen s established policy of constant product improvement, the specifications contained in this manual are subject

More information

COOPER POWER SERIES. Testing a motor capacitor on a voltage regulator procedure instructions. Voltage Regulators MN225064EN

COOPER POWER SERIES. Testing a motor capacitor on a voltage regulator procedure instructions. Voltage Regulators MN225064EN Voltage Regulators MN225064EN Effective March 2017 Supersedes October 2011 (S225-60-12) Testing a motor capacitor on a voltage regulator procedure instructions COOPER POWER SERIES DISCLAIMER OF WARRANTIES

More information

Installation Instructions

Installation Instructions Gen 2 Electro-Module EM-50, EM-100, EM-180 Electrically Released Permanent Magnet Brake Module EM-50-20FBB, EM-100-20FBB, EM-180-20FBB EM-50-20FBC, EM-100-20FBC, EM-180-20FBC P-273-5 819-0529 Installation

More information

Models PR-12F PR-12C PR-15C SURFACE MOUNTED TWO-POST LIFTS INSTALLATION AND OPERATION MANUAL

Models PR-12F PR-12C PR-15C SURFACE MOUNTED TWO-POST LIFTS INSTALLATION AND OPERATION MANUAL Forward this manual to all operators. Failure to operate this equipment as directed may cause injury. INSTALLATION AND OPERATION MANUAL SURFACE MOUNTED TWO-POST LIFTS Models PR-12F PR-12C PR-15C Keep this

More information

Universal Anchoring. Serrated Double Bolt Jaw Users Manual. April 2016 by Vehicle Service Group. All rights reserved. CO9722.1

Universal Anchoring. Serrated Double Bolt Jaw Users Manual. April 2016 by Vehicle Service Group. All rights reserved. CO9722.1 Universal Anchoring Serrated Double Bolt Jaw Users Manual April 2016 by Vehicle Service Group. All rights reserved. CO9722.1 IN20780 Rev. - 4/27/2016 CHIEF'S LIMITED ONE-YEAR WARRANTY & LIABILITY Chief

More information

Feed Scale Installation & Operator s Instruction Manual

Feed Scale Installation & Operator s Instruction Manual Installation & Operator s Instruction Manual May 004 CTB Inc. Warranty CTB Inc. Warranty CTB Inc. warrants each new C-Collect product manufactured by it to be free from defects in material or workmanship

More information

INSTRUCTION BOOK FOR. Tensioned Large Advantage Deluxe Electrol

INSTRUCTION BOOK FOR. Tensioned Large Advantage Deluxe Electrol INSTRUCTION BOOK FOR Tensioned Large Advantage Deluxe Electrol Important Safety Instructions When using your video equipment, basic safety precautions should always be followed, including the following:

More information

24 VOLT AUTOMATIC BATTERY CHARGER PART NO

24 VOLT AUTOMATIC BATTERY CHARGER PART NO 24 VOLT AUTOMATIC BATTERY CHARGER PART NO. 957732 AC Input: DC Output: Battery Type: Specifications 230 volts, 50 hertz, 3.5 amps, single-phase 24 volts, 20 amps initially tapering to 6 amps 24 volt, 12

More information

OPERATING INSTRUCTIONS ZDX 7-1/2AS

OPERATING INSTRUCTIONS ZDX 7-1/2AS OPERATING INSTRUCTIONS ZDX 7-1/2AS www. sethco. com info@sethco.com INDEX Warranty 2 Safety Rules 3 Operating Instructio ns 4 General Description 4 Pre-installation 4 Pump Installation 4 Piping the Pump

More information

Cyclone Trash Separator

Cyclone Trash Separator Owner's Manual Sonny's Enterprises, Inc. 5605 Hiatus Road Tamarac, Florida 33321 16v1 *Table of Contents* WARNING *SAFETY REQUIREMENTS* WARNING... 3 *INTRODUCTION*... 5 Product Specifications... 6 *INSTALLATION*...

More information

COOPER POWER SERIES. High-voltage primary bushings installation instructions. OEM Equipment MN800008EN

COOPER POWER SERIES. High-voltage primary bushings installation instructions. OEM Equipment MN800008EN OEM Equipment MN800008EN Effective February 2016 Supersedes S800-35-2 November 2013 COOPER POWER High-voltage primary bushings installation instructions SERIES DISCLAIMER OF WARRANTIES AND LIMITATION OF

More information

HLS Watt Halogen Illuminator Service Manual

HLS Watt Halogen Illuminator Service Manual HLS-150 150-Watt Halogen Illuminator Service Manual 6018 Bowdendale Avenue Jacksonville, FL 32216 Customer Service: 904 737 7611 FAX 904 733 4832 Toll Free 877 677 2832 (English) TABLE OF CONTENTS Page

More information

AOM-78 7 MONOCHROME OBSERVATION 90 DAY/12 MONTH LIMITED WARRANTY

AOM-78 7 MONOCHROME OBSERVATION 90 DAY/12 MONTH LIMITED WARRANTY BACK COVER FRONT COVER UDIOVOX The Mobile Electronics Company PECIALIZED PPLICATIONS, L.L.C. 90 DAY/12 MONTH LIMITED WARRANTY AUDIOVOX SPECIALIZED APPLICATION, LLC (the company) warrants to the original

More information

Product Specifications for Phase Over Phase GOABS(r)

Product Specifications for Phase Over Phase GOABS(r) 1. General a) This specification covers the design, manufacture, and shipment of phase-over-phase, 1-way, 2-way, 3-way, and 4-way, gang-operated disconnecting switches, both air-break and load-break, for

More information

PSX-240 Enclosed Autotransformer Installation Manual

PSX-240 Enclosed Autotransformer Installation Manual PSX-240 Enclosed Autotransformer Installation Manual IMPORTANT SAFETY INSTRUCTIONS SAVE THESE INSTRUCTIONS! This manual contains important instructions for the OutBack PSX-240 Autotransformer. All of the

More information

MODEL TC400 TIRE CART. Installation, Operation & Repair Parts Information REV P/N:

MODEL TC400 TIRE CART. Installation, Operation & Repair Parts Information REV P/N: MODEL TC400 TIRE CART Installation, Operation & Repair Parts Information REV061614 P/N: 81-0245 1 TABLE OF CONTENTS SAFETY INSTRUCTIONS 2 DEFINITIONS 2 SPECIFICATIONS 3 INSTALLATION INSTRUCTIONS 3 OPERATING

More information

TM SERIES MIXER TMS OPERATION & PARTS MANUAL

TM SERIES MIXER TMS OPERATION & PARTS MANUAL TM SERIES MIXER TMS OPERATION & PARTS MANUAL EU Declaration of Conformity Finish Thompson Inc. hereby declares that the following machine(s) fully comply with the applicable health and safety requirements

More information

FUSE LINKS. Catalog 10B October Phone: Web: hubbellpowersystems.com October 2015.

FUSE LINKS. Catalog 10B October Phone: Web: hubbellpowersystems.com October 2015. FUSE LINKS Catalog 10B October 2015 Phone: 573-682-5521 Email: hpsliterature@hubbell.com Web: hubbellpowersystems.com October 2015 Page 10B-1 FUSE LINKS Warranty- Material Hubbell Power Systems, Inc. warrants

More information

User s Manual and Operating Instructions

User s Manual and Operating Instructions User s Manual and Operating Instructions Model Numbers: CL-36-BDF-A, CL-42-BDF-A, CL-48-BDF-A E355088 READ AND SAVE THESE INSTRUCTIONS IMPORTANT: Read and understand all of the instructions in this manual

More information

Heavy-Duty Single Rear Axles for Port/Terminal Tractors

Heavy-Duty Single Rear Axles for Port/Terminal Tractors Revised 10/2010 Heavy-Duty Single Rear Axles for Port/Terminal Tractors Parts Catalog PB-1037 Off Highway Axle Identification Meritor Off-Highway Brake Z = No brake B = Oil bath wet disk C = Air disk H

More information

1200W Paint DRYING Lamp

1200W Paint DRYING Lamp 1200W Paint DRYING Lamp Model 97641 Assembly And Operation Instructions Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly from

More information

USER S OPERATING AND INSTRUCTION MANUAL

USER S OPERATING AND INSTRUCTION MANUAL Grand Rapids, Michigan, U.S.A. 49504-5298 USER S OPERATING AND INSTRUCTION MANUAL MODEL 777 SLICER 0777S20000-CVR THIS PAGE WAS INTENTIONALLY LEFT BLANK. GEN020319 THIS PAGE WAS INTENTIONALLY LEFT BLANK.

More information

ME3H/ME3F SERIES. Automatic and manual models. Single phase power only 115 or 230 volt.

ME3H/ME3F SERIES. Automatic and manual models. Single phase power only 115 or 230 volt. ME3H SUMP/EFFLUENT PUMP ME3F SUMP/EFFLUENT PUMP ME3H/ME3F SERIES SUBMERSIBLE SUMP AND EFFLUENT PUMPS INSTALLATION AND SERVICE MANUAL Automatic and manual models. Single phase power only 115 or 230 volt.

More information

Operating Instructions and Parts Manual 3-1/2 ton Farm Jack Model FJ-3-1/2A

Operating Instructions and Parts Manual 3-1/2 ton Farm Jack Model FJ-3-1/2A Operating Instructions and Parts Manual 3-1/2 ton Farm Jack Model FJ-3-1/2A JET 427 New Sanford Road LaVergne, Tennessee 37086 Part No. M-440436 Ph.: 800-274-6848 Revision A1 06/2014 www.jettools.com Copyright

More information

COLT CELL BATTERY CHARGER Installation and Operating Instructions

COLT CELL BATTERY CHARGER Installation and Operating Instructions COLT CELL BATTERY CHARGER Installation and Operating Instructions INSTALLATION All COLT chargers are for indoor use only. All COLT chargers are designed for installation into the battery tray. Charging

More information

COOPER POWER SERIES. HX-CB loadbreak fuse cutout installation instructions. Fusing Equipment MN132011EN

COOPER POWER SERIES. HX-CB loadbreak fuse cutout installation instructions. Fusing Equipment MN132011EN Fusing Equipment MN132011EN Effective January 2016 Supersedes KS1.1-01-1 May 2003 HX-CB loadbreak fuse cutout installation instructions COOPER POWER SERIES DISCLAIMER OF WARRANTIES AND LIMITATION OF LIABILITY

More information

UniTorq UTQ Quarter-Turn Actuator Installation and Operation Manual

UniTorq UTQ Quarter-Turn Actuator Installation and Operation Manual UniTorq UTQ 1.5 6.4 Quarter-Turn Actuator Installation and Operation Manual Thank you for purchasing our UTQ 1.5-6.0 Electric Actuators Before installation or operation of the actuator carefully review

More information

Service Letter. Ariens Company 655 W. Ryan St. Brillion, WI

Service Letter. Ariens Company 655 W. Ryan St. Brillion, WI Date: Dec. 2012 No. L-2124R Service Letter Ariens Company 655 W. Ryan St. Brillion, WI 54110 www.ariens.com Product Family: Ariens and Gravely Products with Hydro-Gear Components Subject: Hydro-Gear Warranty

More information

IMPORTANT SAFETY INSTRUCTIONS

IMPORTANT SAFETY INSTRUCTIONS OWNER S MANUAL FLO-MASTER XP2 SERIES PUMPS IMPORTANT SAFETY INSTRUCTIONS When installing and using this electrical equipment, basic safety precautions should always be followed, including the following:

More information

Installation & Operation Manual. Electrak 100 Series / Electromechanical Linear Actuator

Installation & Operation Manual. Electrak 100 Series / Electromechanical Linear Actuator www..c Installation & Operation Manual Electrak 100 Series / Electromechanical Linear Actuator Thomson has many years of experience designing and manufacturing linear actuators for a wide variety of applications

More information

SEPTIC TANK PUMP VAULT FILTER SYSTEM PUMP VAULT INSTALLATION AND SERVICE MANUAL

SEPTIC TANK PUMP VAULT FILTER SYSTEM PUMP VAULT INSTALLATION AND SERVICE MANUAL SEPTIC TANK PUMP VAULT FILTER SYSTEM PUMP VAULT INSTALLATION AND SERVICE MANUAL NOTE! To the installer: Please make sure you provide this manual to the owner of the equip ment or to the responsible party

More information

Swing Arm Magnifying Lamp

Swing Arm Magnifying Lamp Owner s Manual & Safety Instructions Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product s

More information