FF Series Drawer Magnet

Size: px

Start display at page:

Download "FF Series Drawer Magnet"

Melinda Stephens
6 years ago
Views:

Series Drawer Magnet Slide ate Magnetic Latch i-strength Nylon Knobs Optional Right- or Left-and Mounted Purge opper (Right-and shown) Optional Dump Tube (may be located on any side) MODEL 4600-PLS

Slide ate completely and positively shuts off product flow, so you don t have to worry about product spillage creating a mess or safety hazard when you remove the drawer for cleaning.

Dump Tube This option lets you empty the drawer housing and material hopper of plastic after a run has been completed.

1 Series Drawer Magnet Slide ate Magnetic Latch i-strength Nylon Knobs Optional Right- or Left-and Mounted Purge opper (Right-and shown) Optional Dump Tube (may be located on any side) MODEL 4600-PLS NEO Magnets i-temp Temperature Compensated Optional Liquid Port (may be located on any side) Optional Powder Seal for Slide ate Drawer Magnet Options Patented No-Spill Slide ate The patented No-Spill Slide ate completely and positively shuts off product flow, so you don t have to worry about product spillage creating a mess or safety hazard when you remove the drawer for cleaning. Purge opper Our Purge opper speeds clean-out of your equipment when changing color or compound without sacrificing magnetic protection or taking the time to empty your hopper. Dump Tube This option lets you empty the drawer housing and material hopper of plastic after a run has been completed. Liquid Port The Liquid Port allows you to inject liquid color additive into the resin. The port can also be used to hold a temperature probe. Powder Seal Kit This option prevents powder materials from leaking out around the Slide ate which is especially important in applications involving PVC or similar powder materials. The kit provides a compression seal around the Slide ate. Order as original equipment or retrofit on site. NEO Magnets - Standard Equipped with the most powerful Rare Earth magnets available. eaturing the only temperaturecompensated, Rare Earth magnets for injection molding machines. Stainless Steel ousing Built with a welded stainless steel housing for easy cleaning and durability. EPDM asket eaturing a new EPDM gasket that resists heat aging and compression set. i-strength Nylon Knobs itted with high-torque nylon knobs that resist breakage. Clear Polycarbonate Drawer ront Designed with a clear drawer front for easy viewing of product flow and captured contaminants. Magnetic Latch Exclusive magnetic latch locks the No-Spill Slide ate open during operation, yet permits easy closing for purging and color changes.

Series Drawer Magnet Drawer Magnet Selection uide for Standard and Self-Cleaning Series (Dimensions are in inches and keyed to drawings) MODEL 4400-PLS 4x4 MODEL 4600-PLS 6x6 Model 4400PL/PLS

Opg. 5 6 8 L L2 L Per Customer Specifications M 6 6 / 2 6 * Model 400PL/PLS is available with welded transition only (no casting).

provide safer and more convenient cleaning. All models are also available with self-cleaning drawer modules. langes are pre-drilled to OEM or customer specifications.

(L) All bolt patterns falling inside the housing wall will be tapped threads unless shut-off ring interferes with the bolt pattern, in which case studs will be used.

If tapped holes are required, a thicker flange may be provided at an extra charge (rule of thumb: thread depth equals thread diameter).

Inside 2 7 5 Opening may be round, square, or rectangular. K lange size per customer (may be any shape) A 7 5 4 Drawer Opening ront Optional Purge opper Right-hand shown, left-hand available.

2 Series Drawer Magnet Drawer Magnet Selection uide for Standard and Self-Cleaning Series (Dimensions are in inches and keyed to drawings) MODEL 4400-PLS 4x4 MODEL 4600-PLS 6x6 Model 4400PL/PLS 4600PL/PLS 4800PL/PLS 400PL/PLS* A 0 / B 4 X 4 6 X 6 8 X 8 0 X 0 C 6 / 2 8 / 2 0 / 2 2 / 2 D E Min. Rnd. Opg. 7 Max. Rnd. Opg Max. Sq. Opg. / I / 2 5 / 6 / 2 J 7 / 6 K Max. Opg L L2 L Per Customer Specifications M 6 6 / 2 6 * Model 400PL/PLS is available with welded transition only (no casting). ousing Depth + / 2 MODEL 4800-PLS 8x8 Easy Installation MODEL 400-PLS 0x0 Each of the four standard Series units is available with the original No-Spill Slide ate Bunting designed and patented to provide safer and more convenient cleaning. All models are also available with self-cleaning drawer modules. langes are pre-drilled to OEM or customer specifications. Be sure to request the options, flange specifications, and hole locations you want when ordering. (L) All bolt patterns falling inside the housing wall will be tapped threads unless shut-off ring interferes with the bolt pattern, in which case studs will be used. (L2) All bolt patterns falling on the housing wall will require threaded studs ( lg. is standard) unless otherwise requested. If tapped holes are required, a thicker flange may be provided at an extra charge (rule of thumb: thread depth equals thread diameter). (L) Unless specifically requested, all bolt patterns falling clearly outside the housing (and with adequate clearance for bolt heads) will be clearance holes (bolt size + / 6 ). 7 C B Sq. Inside Opening may be round, square, or rectangular. K lange size per customer (may be any shape) A Drawer Opening ront Optional Purge opper Right-hand shown, left-hand available. Rear mounting possible when not using a slide gate shut-off (PLS). 5 I E M (Bottom of purge hopper) Per customer lange size per customer (may be any shape) D 2 NPT for liquid dispensing system. ole may be located on any side. Sq. Clearance hole always provided (bolt size + / 6 ) unless requested otherwise. J Optional Dump Tube Detail Location with relationship to front per customer. Special sizes and configurations are available at extra cost. Ordering Information Bunting part numbers denote models and features. Drawer Magnet Part Numbers have three parts. The initial two letters designate the model type. The numerical digits indicate the size of the square top plate. The trailing letters specify Drawer Magnet options. or example: Part S4600-PLS-CR This part number describes an Series Drawer Magnet with a 6 Square Stainless Steel ousing equipped with a Slide ate and Ceramic Magnet- Powered Cartridges. Series Part Number Explanation Model/Type Size Options = Mild Steel ousing 4400 = 4 Square PL = Without Slide ate S = Stainless Steel ousing 4600 = 6 Square PLS = With Slide ate 4800 = 8 Square 400 = 0 Square Low-Profile Part Number Explanation Model/Type Size Options LP = Mild Steel ousing 600 = 6 Square PL = Without Slide ate LPS = Stainless Steel ousing 800 = 8 Square PLS = With Slide ate Please specify purge hopper, dump tube, and liquid dispensing port options and locations when ordering. Our new NEO Drawer Magnets are outfitted with super-strong Neodymium Rare Earth magnets that capture and hold ferrous metal particles so small that you may not be able to see them with the naked eye. Unlike competing Rare Earth drawer magnets that can permanently lose their magnetic fields at temperatures above 75º, Bunting s exclusive design is the only temperature-compensated Rare Earth drawer magnet made for injection molding machines. It is guaranteed not to lose its permanent magnetic strength when bolted to feed throats operating at temperatures in excess of 75º. That means less downtime for you with reduced screw wear and fewer plugged nozzles.

3 Manual Self-Cleaning Drawer Magnet Available in 6", 8" and 2" models Optional Site lass Window. Both sides. * * Optional " centers for regrind or bridgeable material

4 Manual Self-Cleaning Drawer Magnet 6" model - available with optional slide-gate 2" model - available with optional slide-gate

You can even purchase these units with our original No-Spill Slide ate option. Stainless steel construction and Rare Earth Magnetic Cartridges are also available.

ousing Depth + / 2 (L) All bolt patterns falling inside the housing wall will be tapped threads unless shut-off ring interferes with the bolt pattern, in which case studs will be

Inside K 5 5 6 6 / Max. Opg. 4 L L2 L Per Customer Specifications M 2 7 / 6 4 2 7 / 6 4 2 Drawer ront / 2 Opening M A 5 D I E / 2 NPT for liquid dispensing system.

5 Low-Profile Series Drawer Magnet When headroom is critical, you need Bunting s Low-Profile Drawer Magnet. et Bunting s proven design in a space-saving 5 5 /6 overall height. Standard features include a single row of our exclusive Permanent Magnetic Cartridges, clear polycarbonate drawer front, and rigid 0-gauge mild steel construction. You can even purchase these units with our original No-Spill Slide ate option. Stainless steel construction and Rare Earth Magnetic Cartridges are also available. We ll pre-drill the unit s rugged /4 thick flanges to your specifications at no extra charge. ousing Depth + / 2 (L) All bolt patterns falling inside the housing wall will be tapped threads unless shut-off ring interferes with the bolt pattern, in which case studs will be used. (L2) All bolt patterns falling on the housing wall will require threaded studs ( lg. is standard) unless otherwise requested. If tapped holes are required, a thicker flange may be provided at an extra charge (rule of thumb: thread depth equals thread diameter). (L) Unless specifically requested, all bolt patterns falling clearly outside the housing (and with adequate clearance for bolt heads) will be clearance holes (bolt size + / 6 ). Low-Profile Drawer Magnet Selection uide Model LP600PL LP600PLS LP800PL LP800PLS A 5 / / 6 7 / 2 B 6 X 6 6 X 6 8 X 8 8 X 8 C 8 / 2 8 / 2 0 / 2 0 / 2 D E 2 2 Opening may be round, square, or rectangular. K lange size per customer (may be any shape) Min. Rnd. Opg. Max. Rnd. Opg Max. Sq. Opg I 5 / 6 5 / 6 / 2 / 2 J 7 / 6 7 / 6 7 C B Sq. Inside K / Max. Opg. 4 L L2 L Per Customer Specifications M 2 7 / / Drawer ront / 2 Opening M A 5 D I E / 2 NPT for liquid dispensing system. ole may be located on any side. Sq. Per customer lange size per customer (may be any shape) Clearance hole always provided (bolt size + / 6 ) unless requested otherwise. J Optional Dump Tube Detail Location with relationship to front per customer. Special sizes and configurations are available at extra cost. V Drawer Magnet Our V Series Drawer Magnets are specifically designed for small volume, closed-loop Just-In-Time systems.

E3 VISE ACTION Compression Latch

38 E3 VISE ACTION Compression Latch Overview First 90 0 turn: rotates behind frame The door is now latched against opening Then as you complete the half-turn motion, the shaft and cam compress to pull