PRODUCT DATA SHEET CamSafe 3 & CamSafe 3 WM

Transcription

1 PRODUCT DATA SHEET CamSafe 3 & CamSafe 3 WM Camsafe 3 and Camsafe 3 Wall Mounted CamSafe 3 and CamSafe WM (WallMounted) are filter housings that can be used to supply or exhaust air. They are safe change filter housing. Indeed, the filter can be changed without breaking the containment thanks to the Bag In Bag Out (BIBO) process. This process is required when the air might be contaminated (particles, microorganisms, gases). The CamSafe 3 and CamSafe WallMounted are designed to be used within LifeScience (Pharmaceutical, Biotechnology), Healthcare (Hospital), Biological Safety Laboratory, Animal facilities. The CamSafe WM version is suitable for API (Active Pharmaceutical Ingredient) purposes. The design allows to have access to the filtration equipment from the room. The advantage is to remove API as close as possible to their emission points, avoiding long stretches of contaminated pipeline. In addition to our CamSafe Family, the CamSafe 3 and CamSafe WM are equipped with a clamping device which is positioned outside the airflow, so a reliable in-situ scanning can be performed. Moreover, our Tech Center has developed a new probe (patented) to enhance significantly the reliability of the leak detection. Finally, the system to handle the probe is working with a Magnetic Drive Coupling ensuring a long-lasting tightness of the housing. V

2 CONTENT TECHNICAL DATA... 3 FILTER BANK CONFIGURATION MODULE MODEL CONFIGURATION... 4 MODULE DIMENSIONS... 5 MODULE WEIGHT... 5 BANK DIMENSIONS... 6 EXAMPLE... 7 Configuration... 7 Dimensions... 7 COLLECTORS FLANGE DIMENSIONS... 7 WALL MOUNTED CONFIGURATION CS3 WALL MOUNTED - HEIGHT... 9 CS3 WALL MOUNTED - DEPTH AND WIDTH... 9 EXAMPLE WALL THICKNESS AND CUT OUT Frontal Installation Behind Wall Installation Wall Cut-out Detail SHROUD MODULE Overview Dimensions ACCESSORIES KIT DETAILS Magnehelic Kit - 0 to 750 Pa Safe change plastic bag Mounting Kit Leak tight test device DSP

3 TECHNICAL DATA Construction 2 mm steel airtight welded Painted version Primer layer and Epoxy power coated RAL 9010 Filter mounting Spring loaded filter clamping, with two security functions: clamping is not possible if the filter is not correctly positioned and closing the door can t be done if the filter is not clamped Connection Rectangular connection flange with fastening hole pattern Pressure ports Quick connector for Ø 8 mm tube. Upstream and downstream locations provided. Camfil pressure gauges can be ordered separately. Performances Qualified at +/ Pa: - Class 3 - ISO Class L1 - EN Class D - EN Class C - Eurovent 2/2 Scan Automated scan: Camfil motion control box with 220V power input Manual scan: Camfil manual turning handle Mixing Chamber The purpose of the mixing chamber is to inject and harmonize the distribution of the aerosol on the upstream side of the filter Accessories included - Gasket seat test - DIN with DIN quick coupling (Test equipment can be ordered separately, DIN Safety coupling M5- ISO 4414) - Door window to check if safety bag is installed - All components are explosive atmosphere compliant (optional) Accessories not included - Safe change bag with integrated o-ring sealable - Gasket and bolting - Pressure test kit - Factory mounting full or partial, individual factory tests with test report Outdoor Installation Stainless steel should be used for outdoor installation. Painted version is not suitable for this application. 3

4 MODULE MODEL CONFIGURATION 1. PRODUCT CamSafe 3 (CS3) 2. MODEL SIZE FILTER SIZE x x x MODEL STAGE PREFILTER H: 50 mm FILTER H: 292 mm F 0 1 PF +F 1 1 F + F 0 2 PF + F + F MATERIAL Painted RAL 9010 Stainless Steel L Stainless Steel L Single modules Combinations 5. BANK 1,2,3,4,5,6 6. COLLECTORS: NC NO COLLECTOR INLET 1 TOP LEFT SIDE 2 TOP CENTRAL 3 TOP RIGHT SIDE OUTLET 4 BOTTOM LEFT SIDE 5 BOTTOM CENTRAL 6 BOTTOM RIGHT SIDE 4

5 MODULE DIMENSIONS FILTER FILTER + PREFILTER MIXING CHAMBER TOP VIEW FRONT VIEW TOP VIEW MODULE WEIGHT DIMENSION TYPE WEIGHT in kg 305x610 FILTER 50 FILTER + PREFILTER x610 FILTER 56 FILTER + PREFILTER

6 BANK DIMENSIONS Modules List Collector Sup. Mixing Chamber* F Module Collector Inf. Gaskets (x3) Collector Sup. Mixing Chamber* PF + F Module Collector Inf. Gaskets (x3) Collector Sup. Mixing Chamber* F + F Modules Collector Inf. Gaskets (x4) Collector Sup. Mixing Chamber* PF + F + F Modules Collector Inf. Gaskets (x4) H (mm) Total H (mm) Total H (mm) 445 Total H (mm) Total H (mm) Total H (mm) * 1728* 1802* * * * 1978* 2052* * * * 2381* 2455* * 690 2* * 2631* 2705* * * Total Width (flange to flange) Total * * * * All dimensions are in mm Total Height without mixing chamber and a gasket less with the *, total height in bold. 6

7 EXAMPLE Configuration CS3 designates the Camfil CamSafe 3 product line CS3 610 designates the filter size CS3 610 PF+F designates the filter stages CS3 610 PF+F PAINTED designates the material CS3 610 PF+F PAINTED 2 designates the bank number CS3 610 PF+F PAINTED 2 1/6 designates the collector s inlet/outlet positions 2 Modules List H (mm) Total Collector Sup. Mixing Chamber* PF + F Module 900 Collector Inf. Gaskets (x3) * Total Width 1685 CS3 610 PF+F PAINTED 2 1/6 Illustration Dimensions from table Dimensions CS3 610 PF+F PAINTED 2 1/6 Dimensions 7

8 COLLECTORS FLANGE DIMENSIONS

9 Transition Outlet Mixing Chamber Main body Damper Transition Inlet CS3 WALL MOUNTED - HEIGHT Illustration Height Illustration D Optional Height 385 Illustration F+F and PF+F+F are 2 modules with a gasket in between Height (+ Gasket x1) 1550 (+ Gasket x1) Optional Illustration MC Can be used with double filter stage Height 400 Can be used twice Illustration Height 916 CS3 WALL MOUNTED - DEPTH AND WIDTH The configuration has no influence on the width 9

10 EXAMPLE Transition Outlet + Damper + CS 3 Module + Mixing chamber +Transition Inlet Transition Outlet Gasket Damper Gasket CS 3 Module Mixing Chamber Gasket Gasket Transition Inlet 10

11 WALL THICKNESS AND CUT OUT Frontal Installation Behind Wall Installation 200 mm max 200 mm max 2 different brackets holder position for adjustment Screw connection Wall Cut-out Detail a b c Value mm (For example above) Details General case with 5 mm clearance all around Frontal Installation a 976 Total W + 2x5 b 2310 Total H x5 c Behind Wall Installation a mm clearance b mm clearance c 83 Sealing all around the flange against the wall SHROUD MODULE Overview Particule Injection Connection holes Dimensions 11

12 ACCESSORIES KIT DETAILS Magnehelic Kit - 0 to 750 Pa Range: Gasket: Wall: Tube: Pa 4 gaskets vulcanize fiber diam. 15x10 thickness 3mm 2 passages Layton union wall 4x6 2 m of vinyl tube 4x6 Safe change plastic bag Type: Conception: Connecting: Applications: Safe change plastic bag welded with sealed o-ring PVC thickness 20/100 frequency welded high By Ø8mm nitril oring For filter changing in contaminated airflow Mounting Kit Application: Connection: CamSafe 3 housing connecting kit with perfectly adapted repositionable adhesive gasket and bolts On rectangular pre-drilled flanges, for: CamSafe module to CamSafe module Camsafe to collectors Collectors to ventilation system Bolts: Gasket: Electrogalvanized bolting for Painted Camsafe Stainless Steel for Stainless Camsafe EPDM gasket Thickness 5mm, 4 parts gasket with repositionable adhesive 12

13 Leak tight test device DSP-3 Pressure Range: 0-3 kpa Measurement Range: Min 6 l/h Max 60l/h Function: Suitable for testing HEPA/ULPA filters with test grooves Housing dimensions: LxWxH: 240 x 120 x 160 The Camfil seal position tester can be used to test all HEPA/ULPA filter cells for perfect seal position in any suitable duct housing, even during operation. Connection pieces on CAMFILFKB/D, FKS/D, CAMSAFE, CAMBOX and containment housings are clearly indicated with a label. For FKOP housings, connection pieces are located on the side of the interior of the housing. According to DIN 1946/sheet 4, the leakage air flow must be tested between the filter seal and housing support frame at an overpressure of 2000 Pa (200 mm water column) in the test groove. The permissible leakage air flow VL should not exceed the natural leakage air rate (penetration) of the HEPA/ULPA filter, E11 H14 as per DIN EN