HAFNER Pneudactic Pneumatic Training Sets
|
|
|
- Reynold Doyle
- 5 years ago
- Views:
Transcription
1 HAFNER Pneudactic Pneumatic Training Sets
2 Page 2 HAFNER pneudactic The HAFNER pneudactic training sets have been developed to educate students or employees in the basics of the use of pneumatic components and systems. Elements can easily be changed and adapted to individual needs. The following products are available and can be added to the panel: 1. Valves 2. Air Preparation Units (FRL) 3. Cylinders 4. Fittings 5. Tubes 6. PLC and BUS coupler Hafner is offering three predefined sets: SET ECO including product groups 1-5 panel 1000 x 481 mm SET Standard including product groups 1-5 panel 1600 x 481 mm SET Professional including product groups 1-6 panel 1600 x 481 mm The panel and fixing elements are also available separately so that the customers can define the components themselves or add additional products later. Please refer to page 3. Product Highlight: Profile cylinder with transparent body. Included in every predefined set.
3 Page 3 Panel and Fixing Elements The assemblage of the products to the panel is very easy and user friendly. Mounting plates have positioning pins on the backside which fit to the perforated panel. Clamping magnets fix the mounting plates on location. The hole pattern in the mounting plates allow the installation of many different Hafner products. Products to be fixed with screws. Four different mounting plates are available: HPD SET Universal mounting plate HPD SET Mounting plate for valves with inductive sensor (EA types) HPD SET Mounting plate for pressure gauges HPD SET Mounting plate with adjustable height for roller lever valves
4 Page 4 Predefined Sets Hafner is offering three predefined sets to its customers. All sets include basic pneumatic components such as valves, cylinders, fittings, air preparation equipment and tube. The professional set also includes a PFC100 controller from WAGO. Delivery content list: Type Qty. Description SET ECO HDP-SET1 SET STANDARD HDP-SET2 SET PROFESSIONAL HDP-SET3 HPD-PLH-03 1 pc. Panel size 1000 x 481 mm x HPD-PLH-01 1 pc. Panel size 1500 x 481 mm (1600 x 481 mm including side bearers) x x HPD BA pc. 3/2-way panel mounting valve, manually actuated, including push button BA x x x HPD BA pc. 5/2-way panel mounting valve, manually actuated, including rotary lever short BA x x x HPD BA pc. 3/2-way panel mounting valve, manually actuated, including rotary lever short BA x x x HPD BR pc. 3/2-way roller lever valve x x x HPD P SR 1 pc. Pneumatic pressure switch x x x HPD P pc. 3/2-way pneumatic valve, spring return x x x HPD P pc. 5/2-way pneumatic valve, spring return x x x HPD P pc. 5/2-way pneumatic valve, bistable x x x HPD VA pc. Logic element, OR-gate x x x HPD ES pc. Logic element, AND-gate x x x HPD SE pc. Quick-exhaust valve x x x HPD DR pc. Flow regulator, uni-directional x x x HPD REM 25/50 1 pc. Single acting round cylinder, ISO 6432 x x x HPD RIM 25/50 2 pc. Double acting round cylinder, ISO 6432 x x x HPD KFRG-014/8 G HA 1 pc. Filter-regulator, semi-automatic drain x x x HPD KREG-014/8 G 1 pc. Pressure regulator x x x HPD G R 1 pc. Pressure gauge x x x HPD A /4-1/8-3 1 pc. Distribution manifold x x x CPU 4/2 K 1 roll Polyurethan tube, 4/2, blue, 50 meter x x x HPD BES 516 M8 1 pc. Inductive sensor x x x HPD RXP 25 1 pc. Proximity switch & mounting type RXP 25 and SKR 130 x x x HPD DIL 32/100 PLX 1 pc. Double acting profile cylinder, ISO 15552, transparent body, including pressure regulator type A x x x HPD MH pc. 3/2-way solenoid valve, spring return x x HPD MH pc. 3/2-way solenoid valve, spring return x x HPD MH pc. 5/2-way solenoid valve, bistable x x HPD PR02 P 02 P1 1 pc. Digital pressure switch x x Relay box 1 pc. x x PFC pc. WAGO Starter KIT x I/O Modul 2 pc. x
5 Page 5 Example schematics Many different schematics can be realized by the user with the predefined Hafner sets. We would like to give two example schematics on this page. Many more are possible. Example schematic SET ECO Example schematic SET Standard and SET Professional
6 Page 6 Also available: Hafner Pneumatic Training Course 11 Chapters with basics in pneumatics Further information can be found on: You are interested in our Pneudactic-Sets? Please contact us! Your personal point of contact: Mr. Kevin Peter kp@hafner-pneumatik.de Hafner-Pneumatik Krämer KG Stammheimerstraße 10 D Kornwestheim Germany Phone: Fax: info@hafner-pneumatik.de Web:
Hafner-Pneumatik. Excellence in Pneumatics
316 Hafner-Pneumatik Excellence in Pneumatics Hafner-Pneumatik is the manufacturer of a complete range of high-quality pneumatic control valves. 50 years of knowledge and venture in the development of
10 mm Solenoid Valves. 0,6 W Power Consumption. 10,5 mm wide. 230 l/min air-flow. Service friendly design. High quality solenoid system
10 mm Solenoid Valves 0,6 W Power Consumption 230 l/min air-flow 10,5 mm wide Service friendly design High quality solenoid system Table of Contents page 2 page 5/2 way in-line valves 3 MMD 510 301 24DC
Accessories for smart valveautomation
Accessories for smart valveautomation Hafner-Pneumatik Krämer KG Stammheimer Straße 10 D-70806 Kornwestheim Phone +49 7154 17 85 89 0 Fax +49 7154 17 85 89 28 info@hafner-pneumatik.de www.hafner-pneumatik.de
Electro Pneumatic Workbench Scientech 2470
Scientech 2470 Electro Pneumatic Workbench is designed to demonstrate the design, construction and application of Pneumatic components and circuits. It integrates PLC technology to build Hybrid Industrial
Electro Pneumatic WorkStation Scientech 2470
Electro Pneumatic WorkStation is designed to demonstrate the design, construction and application of Pneumatic components and circuits. It integrates PLC technology to build Hybrid Industrial Automation
Excellence in Pneumatics
Excellence in Pneumatics Introduction of Hafner-Pneumatik & The product Range Content: 1. Introduction of the company Hafner Pneumatik 2. Competive advantages of the Hafner valves 3. The product range
Suggested list for the Hydraulic and Pneumatic lab Instruments Mechatronics Engineering Department School of Applied Technical Science
Suggested list for the Hydraulic and Pneumatic lab Instruments Mechatronics Engineering Department School of Applied Technical Science Pneumatic and Electro-pneumatic components: No. EQUIPMENTS operating
Subject: Pneumatic Training Kit with portable Air Compressor
MSME TOOL ROOM: HYDERABAD (CENTRAL INSTITUTE OF TOOL DESIGN) Balanagar, Hyderabad 500 037 TEL.NO.23772747, 23776168 FAX No.0-4023772658 E-mail:citdpurchase@citdindia.org Visit us: www.citdindia.org. TENDER
2.3. Lever Actuated Valves 2.3. page 25
2.3 page 25 2.3 Lever Actuated Valves Selected models are available for low temperature application. Temperature-range: - 50 C to + 50 C. For detailed information refer to chapter 2.9. Instead of a rubber-gaitor
IMTS 2012 Valve Control
Pneumatic Control Mechanical Control IMTS 2012 Valve Control Ryan Hettinger Applications Engineer Festo Corporation Solenoid Control Fieldbus Control Integrated PLC Control IMTS 2012 Pneumatic Control
VALVES ISO 5599/1, SERIES IPV-ISV
VALVES ISO 5599/, SERIES IPV-ISV The assembly surface dimensions of ISO, ISO2 and ISO 3 valves are to ISO5599-. They are available in the 5-way versions with 2 and 3 positions and with pneumatic or solenoid
Automatic Control System PS Pneumatic Training System. Features
Pneumatic Training System It is well known that Factory utomation is an indispensable measure to reduce labor cost, improve production efficiency and achieve higher product quality, which is widely adopted
ADVANCED CUSTOMIZED ELECTRO PNEUMATIC TRAINER (PRODUCT CODE: SAP 20B)
The Advanced Customized Electro Pneumatic Trainer (SAP 20B) is capable of being used to demonstrate the design, construction and application of electro-pneumatic components and circuits. Objectives:- The
ROBOTICS SAFETY MOTION & CONTROL. SENSORS, VISION & IIoT PNEUMATICS ELECTRICAL
MOTION & CONTROL ROBOTICS SAFETY SENSORS, VISION & IIoT PNEUMATICS ELECTRICAL Cedarburg Headquarters 7400 Quail Court P.O. BOX 860 Cedarburg, WI 53012 Weston Branch 4601-A Camp Phillips Rd Weston, WI 54476
Learning System for Automation and Communications. Electropneumatics. Workbook Basic Level S1 K1 K1 Y1
Learning System for Automation and Communications Electropneumatics Workbook Basic Level 1 2 3 S1 K1 K1 S2 K1 094005 Order no. 094005 Description: TEACHW.E-PNEUM. Designation: D.S201-C-GB Edition: 08/1993
SAP E & C ADVANCED CUSTOMIZED ELECTRO PNEUMATIC TRAINER (FOR ITI) (PRODUCT CODE: SAP 20B-I)
The Advanced Customized Electro Pneumatic Trainer (SAP 20B-I) is capable of being used to demonstrate the design, construction and application of electro-pneumatic components and circuits. Objectives:-
HYDROMODEL-200. Implements and controls hydraulic and electro-hydraulic circuits. Transparent Hydraulics - Electro-hydraulics
HYDROMODEL-200 Transparent Hydraulics - Electro-hydraulics Hydraulic and electro-hydraulic technology at a glance Implements and controls hydraulic and electro-hydraulic circuits www.smctraining.com training@smctraining.com
BASIC PNEUMATIC & ELECTROPNEUMATIC TRAINING SYSTEM
BASIC PNEUMATIC & ELECTROPNEUMATIC TRAINING SYSTEM UCTECH has designed a comprehensive range of specialised training packages and products for pneumatic and electro-pneumatic training using well-known
Level 7 Post Graduate Diploma in Engineering Mechatronics
9210-223 Level 7 Post Graduate Diploma in Engineering Mechatronics 0 You should have the following for this examination one answer book calculator (programmable calculators are not allowed) pen pencil
B1 VALVES SERIES 70 DISTRIBUTORS B1.12
VALVES SERIES 70 The Series 70 forms part of Metal Work s full range of traditional valves. They are available in sizes 1/8, 1/4, 3/8 and 1/2, versions 3/2, 5/2, 5/3 and double 3/2, with mechanical, manual,
SUMMARY KIT PNEUMATIC MOTION
SUMMARY G1 P CONFIGURABLE (KIT PMC) G1.2 P READY (KIT PMR) G1.3 P CUSTOM G1.9 SUMMARY G1.1 CONFIGURABLE (KIT PMC) An on-line configurator is provided for the ease-and-quick selection of the cylinder, the
Chapter 6 Pneumatic Logic Sensors and Actuators
Chapter 6: Penumatic logic sensors and actuators -IE337 Chapter 6 Pneumatic Logic Sensors and Actuators 1 Introduction to Pneumatic Why pneumatic? Pneumatic control system is frequently used in building
Annex to certificate
Annex to certificate Project: Mechanically actuated valves, direct operated, pneumatically operated valves and pilot operated Customer: HAFNER Pneumatika Kft. Halászi Hungary Contract Number: Q15/11-126-C
Mechatronics systems
Mechatronics systems www.matrixtsl.com 1 HP4550 Solution Description This solution contains products from our Locktronics, E-blocks and Automatics ranges. The pack includes a wide variety of resources
HIGH VOLTAGE MODULE TEST SYSTEM
HIGH VOLTAGE MODULE TEST SYSTEM 4.0/4 Module Test Systems n AC, DC, and impulse testing n Factory testing n R&D n Education / training MODULES FOR VOLTAGE GENERATION Test transformers for 100 and 200 kv
page 3EN ISO 9001 : 2008
Valves 2016 page 3EN ISO 9001 : 2008 page 4 EAC-Certification Table of Contents page 5 page 16 The Hafner type numbering system 18 Quick Finder for Manifold Systems 19 General Technical Information 21
Hafner-Pneumatik Excellence in Pneumatics. Competence in Valve Automation
fluid fluid control control Hafner-Pneumatik Excellence in Pneumatics 316 Competence in Valve Automation Hafner-Pneumatik is the manufacturer of a complete range of high-quality pneumatic control valves.
Hand-operated Hydraulic Control Valve 4- way 2-position 4 Ports
Hand-operated Hydraulic Control Valve 4- way 2-position 4 Ports Hydraulic Directional Valve P40 2 Spool 4 Way 3 Position Chief 220907. $137.00 Prince Hydraulic Compensated Flow Control RD-175-30 3/4" Port
VALVES SERIES 70 DISTRIBUTORS
VALVES SERIES 70 This is Metal Work s full range. Available in three sizes: 1/8, 1/4, 3/8, 1/2. Three versions: 3/2; 5/2; 5/3, four different types of actuation (mechanical, manual, pneumatic and electric).
Modernization Program For Kurtz EPS Shape Molding Machinery
2009 Modernization Program For Kurtz EPS Shape Molding Machinery - Customer Asset - Page 1 General Company Information ADDRESS: 1779 Pilgrim Road Plymouth, WI 53073 AFTER HOUR SERVICE HOTLINE: 920-254-2000
Figure 3-9. Right-Hand Port Connector Configuration. 1. Remove electrical power to the Hydraulic Control Unit.
Figure 3-9. Right-Hand Port Connector Configuration Extend and Retract Limit Switch Configuration (if required) 1. Remove electrical power to the Hydraulic Control Unit. WARNING: DO NOT REMOVE OR INSTALL
VALVES ISO 5599/1, SERIES IPV-ISV
The assembly surface dimensions of ISO1, ISO2 and ISO 3 valves are to ISO5599-1. They are available in the 5-way versions with 2 and 3 positions and with pneumatic or solenoid actuation. TECHNICAL DATA
TECHNICAL PAPER 1002 FT. WORTH, TEXAS REPORT X ORDER
I. REFERENCE: 1 30 [1] Snow Engineering Co. Drawing 80504 Sheet 21, Hydraulic Schematic [2] Snow Engineering Co. Drawing 60445, Sheet 21 Control Logic Flow Chart [3] Snow Engineering Co. Drawing 80577,
Basic Hydraulics. Module 2: Actuators and directional control valves. Curriculum Development Unit PREPARED BY. August 2013
Basic Hydraulics Module 2: Actuators and directional control valves PREPARED BY Curriculum Development Unit August 2013 Applied Technology High Schools, 2013 ATM-312 Basic Hydraulics Module 2: Actuators
Didactic and technological innovation at the service of training in pneumatics and electro-pneumatics have resulted in the creation of the
Didactic and technological innovation at the service of training in pneumatics and electro-pneumatics have resulted in the creation of the PNEUTRAINER-200 system. A fully modular system designed for the
Chapter 11: Valves and Actuators with the NAMUR-interface
Right of authorship: the content of the training (wording, drawings, pictures) are owned by the author. Any utilization except for individual use is allowed only after permission of the author. Valves
For system diagrams and component identification
Pneumatic Symbols For system diagrams and component identification Contents Standards Actuators Basic symbols Valve symbol structure t Functional elements Flowlines Connections Conditioners and plant Pressure
Festo Modular Production System (MPS)
ELEC E8114 Manufacturing Automation Systems Modelling Festo Modular Production System (MPS) Figure 1 Distribution station (left) and testing station (right) 1 Introduction The purpose of this document
FLUID POWER FLUID POWER EQUIPMENT TUTORIAL PNEUMATIC CIRCUTS. This work covers part of outcome 3 of the Edexcel standard module:
FLUID POWER FLUID POWER EQUIPMENT TUTORIAL PNEUMATIC CIRCUTS This work covers part of outcome 3 of the Edexcel standard module: UNIT 21746P APPLIED PNEUMATICS AND HYDRAULICS The material needed for outcome
Parts Catalog SLICING MACHINES
Parts Catalog Model 4600P SLICING MACHINES MODELS: 4600P, 4975P & 493 05-0-2 IMPORTANT! TO EXPEDITE SHIPMENT OF PARTS, ALWAYS SPECIFY MODEL, REV, PART NUMBER, AND SERIAL NUMBER OF SLICER. GLOBE FOOD EQUIPMENT
SAP E & C PLC PROGRAMMING TRAINER KIT (PRODUCT CODE: PCST 14)
SAP E & C PLC PROGRAMMING TRAINER KIT (PRODUCT CODE: PCST 14) PLC PROGRAMMING TRAINER KIT The applications and working modules of PLCs which are optionally hooked up with PLC Programming Trainer Kit (PCST
Hydraulics Simulation Software (LVSIM -HYD) - 10 Users Network (6385-Q0)
Hydraulics Simulation Software (LVSIM -HYD) - 10 Users Network 588018 (6385-Q0) LabVolt Datasheet Festo Didactic en 12/2018 Table of Contents General Description 2 Features 2 Hydraulics Equipment 3 Computer
Electro - Hydraulics. & Pneumatics. Electro Hydraulic Press. Comparison. Electro Hydraulics. By: Alireza Safikhani
Electro - 9 Hydraulics & Pneumatics 2 Electro Hydraulic Press The hydraulic press is controlled via the electrical control panel. Electrical signals are used to activate the valves in the hydraulic installation.
5/2-way monostable/bistable - 5/3 CC, CO, CP With outlets on the body - For individual or manifold assembly Size 10,5 mm
> Series E valves and solenoid valves Series E valves and solenoid valves 5/-way monostable/bistable - 5/3 CC, CO, CP With outlets on the body - For individual or manifold assembly Size 10,5 mm Series
Development and Fabrication of Electro Pneumatic Automatic Stamping Machine
Development and Fabrication of Electro Pneumatic Automatic Stamping Machine Pawan Koppa 1, Dr.N.Nagaraja 2, Amith.V 3,Sushilendra Mutalikdesai 4,Vyasaraj.T 5,Gururaj Hatti 6 Pramod Kumar 7, Rohit Kumar
PNEUTRAINER-200 Pneumatics - Electro-pneumatics
PNEUTRAINER-200 Pneumatics - Electro-pneumatics End-to-end solution for training in pneumatics and electro-pneumatics. www.smctraining.com training@smctraining.com 46 Develop the SKILLS... Analysis Troubleshooting
PNEUTRAINER-400 Pneumatics - Electropneumatics
PNEUTRAINER-400 Pneumatics - Electropneumatics End-to-end solution for training in pneumatics and electro-pneumatics SMC industrial systems components on panel mounting plate Implements and controls pneumatic
Valves and Solenoid valves Series E 2/
CATALOGUE > Release 8.6 > Series E valves and solenoid valves Valves and Solenoid valves Series E 5/-way monostable/bistable - 5/3 CC CO CP With outlets on the body - For individual or manifold assembly
Test. What type of cylinder would you use? A. Single-acting cylinder B. Double-acting cylinder Answer:
Test This test allows you to establish whether your basic knowledge of pneumatic controls is sufficient for you to attend the advanced course P or whether you should attend the basic level course P. The
ME 360 Test #3 Spring 08 5/5/08. Closed book, closed notes portion of test. Total of 25 out of 100 points for questions #1 to #6.
ME 360 Test #3 Spring 08 5/5/08 Closed book, closed notes portion of test. Total of 25 out of 100 points for questions #1 to #6. 1) [10] Mark the following true (T) or false (F) questions a) Pressure relief
Push-Pull Slide Gate - Series E
Push-Pull Slide Gate - Series E For Gravity Flow Applications and Vacuum LSP Flanged Top View Available in sizes 2" to 12" Side View Bolt Thru Pipe Flange Connection Top View Stainless steel material contact
[You may download this article at: https://fluidsys.org/downloads/ ]
![[You may download this article at: https://fluidsys.org/downloads/ ]](/thumbs/75/72588514.jpg "[You may download this article at: https://fluidsys.org/downloads/ ]")
Fluidsys Training Centre, Bangalore offers an extensive range of skill-based and industry-relevant courses in the field of Pneumatics and Hydraulics. For more details, please visit the website: https://fluidsys.org
SOLENOID VALVES AND PNEUMATIC VALVES
9 S E R I E S Electropneumatically and pneumatically operated valves Series 9 Assembly with sub-base (ISO 5599/1 Standards) Sizes 1, and 3 001 The Series 9 electropneumatically or pneumatically operated
SINGLE SHAFT ROTOR SHREDDER MODEL SRS
SRI SINACO ENGINEERING WORKS SDN BHD (861084-X) SINGLE SHAFT ROTOR SHREDDER MODEL SRS 125-6000 In converting Empty Fruit Bunches (EFB) to raw material for various applications such as preparing biomass
Table of Contents. Table of Contents Pneumatik / Hydraulik
Table of Contents Table of Contents Pneumatik / Hydraulik Pneumatics with UniTrain Hydraulics with UniTrain PBC / PEC Pneumatics and Electro-Pneumatics PBC Fluid power trainer pneumatics set PBC 2 Fluid
Z1 B1 B2 Z2 B3 B4. Steuerteil + 24 V. Leistungsteil K1 K2 K1 K2. Practice for Professionals Electropneumatics Trainee s manual. Version 1.
04 Z1 B1 B2 04 Z2 B3 B4 31 14 Y1 12 4 2 5 3 1 15 31 14 Y2 12 4 2 5 3 1 15 Steuerteil + 24 V B1 S0 K1 B2 K2 B4 K3 B3 Leistungsteil 1 2 3 4 5 6 7 8 9 K4 K1 K2 0V K1 K2 K1 K3 K2 K4 K3 Y1 K3 Y2 Practice for
BERMAD Irrigation. Solenoid Valves S - Series. Water Control Solutions
Solenoid Valves Water Control Solutions Company Profile Experience and proven results have made BERMAD synonymous with water and other fluid control and management. Cutting-edge technology is one of the
MINIVALVES, MECHANICALLY AND HAND OPERATED SERIES VME
MINIVALVES, MECHANICALLY AND HAND OPERATED SERIES VME Minivalves with / NO NC poppet, Installation in any position Push-in fittings for pipe Ø 4 mm and on the valve body Low actuation force Rapid, accurate
Discrete Control Logic. 1. Pneumatic circuits. - Low forces - Discrete, fixed travel distances - Rotational or reciprocating motion
Discrete Control Logic 1. Pneumatic circuits - Low forces - Discrete, fixed travel distances - Rotational or reciprocating motion Main components: compressor, valves, cylinders Pneumatic components: cylinders
Complete Range of Movement Solutions
Complete Range of Movement Solutions A complete range of Movement Solutions are available from your Local Pirtek Centre. ISO & VDMA Pneumatic Cylinders Compact Cylinders Guided Cylinders Non-Standard Cylinders
Hafner-Pneumatik Excellence in Pneumatics. Competence in Valve Automation
Hafner-Pneumatik Excellence in Pneumatics 316 Competence in Valve Automation Hafner-Pneumatik is the manufacturer of a complete range of high-quality pneumatic control valves. Excellence in Pneumatics
6080 Hydraulics Training System
6080 Hydraulics Training System LabVolt Series Datasheet Festo Didactic en 240 V - 50 Hz 03/2018 Table of Contents General Description 2 Innovative Design 3 Virtual Laboratory Equipment 3 Courseware 3
AIR PREPARATION PRODUCTS F.R.L. 3 PCS Combination F.R.L. 2 PCS Combination Filter - Regulator
AIR PREPARATION PRODUCTS 2.1 F.R.L. 3 PCS Combination 42-43 42-43 2.2 F.R.L. 2 PCS Combination 44-45 2.3 Filter - Regulator 46-47 2.4 Filter 48-49 44-45 46-47 48-49 2.5 Pressure Regulator 50-51 50-51 2.6
Illustrated Parts Guide DSD EDGE 120VAC. Page 1 of 32
Illustrated Parts Guide DSD EDGE 120VAC Illustrated Parts Guide Page 1 of 32 This document is designed to provide a quick reference to the major replacement parts and components for the DSD EDGE. Parts
UNI-DIRECTIONAL KNIFE GATE VALVE
UNI-DIRECTIONAL KNIFE GATE VALVE The MU-CYL model knife gate is a Uni-directional valve, equipped with automatic or manual driver, that by its loose elastomeric clamping ring design (tight version) ensures
Automation is the techniques and equipment used to achieve automatic operation or control.
VALVE AUTOMATION What is Automation? Automation is the techniques and equipment used to achieve automatic operation or control. Automation is an automatic operation and control of machinery or processes
S-Series. Solenoid Valves
S-Series Company Profile Experience and proven results have made BERMAD synonymous with water and other fluid control and management. Cutting-edge technology is one of the reasons BERMAD has retained its
Pneumatic Quick Reference Guide
Pneumatic Quick Reference Guide DENVER (303) 295-7500 EMERYVILLE (510) 658-8300 FRESNO (559) 268-4291 REDDING (530) 221-6500 SAN DIEGO (619) 691-0215 STOCKTON (209) 466-1531 TULARE (559) 688-2911 WALNUT
PREVIEW ONLY - FULL COPY AVAILABLE TO CONSORTIUM MEMBERS. Escalator Specific Electrical Systems. Course 209 PARTICIPANT GUIDE
Escalator Specific Electrical Systems Course 209 PARTICIPANT GUIDE Transit Elevator/Escalator Training Consortium Escalator: Electrical Systems Participant Guide Transit Elevator/Escalator Maintenance
Input, Control and Processing elements
PNEUMATIC & HYDRAULIC SYSTEMS CHAPTER FIVE Input, Control and Processing elements Dr. Ibrahim Naimi Valves The function of valves is to control the fluid path or the pressure or the flow rate. Depending
APS & APIS ATEX AIRPOWER SWITCH BOXES FEATURES DESCRIPTION
page 1 DESCRIPTION The switch boxes are suitable for rotary actuators and are the industry leader in versatility, quality and approvals gained. Models include APS standard range with a variety of outputs
: Automation Laboratory 1
Table A.1 shows elements found in FluidSIM library with a brief description for each of them. Compressed air supply The compressed air supply provides the needed compressed air. It contains a pressure
TRAILER MOUNTED PUMP MODEL B50 DRIVE CYLINDER CIRCUIT HYDRAULIC COMPONENTS & SCHEMATIC
DRIVE CYLINDER CIRCUIT HYDRAULIC COMPONENTS & SCHEMATIC PAGE 01 SINGLE SHIFT SWING TUBE CIRCUIT HYDRAULIC COMPONENTS & SCHEMATIC PAGE 02 DUAL SHIFT SWING TUBE CIRCUIT HYDRAULIC COMPONENTS & SCHEMATIC PAGE
CYLINDERS AND VALVES SERIES KNORR. Moving more than air
CYLINDERS AND VALVES SERIES KNORR 3 Moving more than air Content 3-2 3-2 page 3.1 Cylinders 3.1.1 SDJ / SEJ Clamping cylinder 3 3.1.2 Accessories for clamping cylinders 5 3.1.3 DU_J Standard cylinder 6
Industrial Pneumatic Systems Syllabus [Detailed]
![Industrial Pneumatic Systems Syllabus [Detailed]](/thumbs/81/83340511.jpg "Industrial Pneumatic Systems Syllabus [Detailed]")
TECHNICAL TRAINING - SWAPPING DOWNTIME FOR PRODUCTIVITY! Industrial Pneumatic Systems Syllabus [Detailed] 1. Fundamentals of Fluid Power Systems. The three states of matter. Definition of a fluid. Derivation
Pneumatic Systems. Module 3: Logic Operations in Electropneumatics. IAT Curriculum Unit PREPARED BY. August 2008
Pneumatic Systems Module : Logic Operations in Electropneumatics PREPARED BY IAT Curriculum Unit August 2008 Institute of Applied Technology, 2008 2 Module : Logic Operations in Electro-pneumatics Module
2/2-way, 3/2-way NC and NO. Monostable - bistable (with magnetic memory) Ports M5 and G1/8 - cartridge ø4
CATALOGUE > Release 8.5 > Directly operated solenoid valves Series A Directly operated solenoid valves Series A /-way, 3/-way NC and NO. Monostable - bistable (with magnetic memory) Ports M5 and G1/8 -
Short form catalogue ATEX certified products
Short form catalogue certified products Products classified for the use in potentially esplosive atmospheres (Directive Atex 94/9/CE) As from the first of July 2003, all products which are commercialised
Sizes 50, 65, 80. Presence of internal channels for re-lubrication Large range of axis mounting accessories
> Series 5E electromechanical axis C_Electrics > 207 Series 5E electromechanical axis New models Sizes 50, 65, 80 Multiposition system with transmission of the movement with toothed belt Suitable for high
Mechanical Engineering
Mechanical Engineering Stepper Motor Drive Full step controlling of stepper Motor Single step, low and high speed, Forward and Reverse Small stepper Motor with driver and Power Circuit Necessary Power
Mechanically actuated valves
Mechanically actuated valves 3/2-5/2 spool valves with 1/8-1/4" NPT threaded ports BSP version avaiable on request Installation in any position Comprehensive range of actuations, direct or servo-piloted
Marine Technology Pneumatics
Marine Technology Pneumatics for MARINE applications Aventics Marine Applications Pneumatics Ship Controls Valve Control Systems Selective Catalytic Reduction (SCR) Control of two-stroke engines Control
6081 Pneumatics Training System
6081 Pneumatics Training System LabVolt Series Datasheet Festo Didactic en 220 V - 50 Hz 03/2018 Table of Contents General Description 2 Innovative design 3 Virtual Laboratory Equipment 3 Courseware 3
ACTUATORS AND AUTOMATIC VALVES
ACTUATORS AND AUTOMATIC VALVES By: Josh Quinn Utilities Group Maintenance Supervisor Neuse River Resource Recovery Facility Joshua.quinn@raleighnc.gov SUMMARY The intent of this presentation is to give
, connection for light duty. *(Dilute phase up to 15 psig max.) Standard Features. Positive Blade Lock (PBL) between blade & cylinder rod
ISO "TPS" Tube & Pipe Stubs Series ''E'' Slide Gate 9001-2008 "LSP" - Lightweight Stud Pattern Tube & Pipe Stubs for compression couplings Pneumatic actuated Slide Gate for vacuum, low pressure* and gravity
nickel-plated brass - PBT technopolymer HNBR, FKM stainless steel
CATALOGUE > Release 8.8 > Series A solenoid valves Series A directly operated solenoid valves /-way - Normally Closed (NC) and Normally Open (NO) 3/-way - Normally Closed (NC) and Normally Open (NO)»»
3/2 Way Valve G1/8. Data Sheet No E. Characteristics Symbol Unit Description General Features Spool valve.
AP64E00DX00X Characteristics to VDI 90 Pressures quoted as gauge pressure Characteristics Symbol Unit Description General Features Spool valve Mounting screws M Tube connection Thread Port size ; 7.4 deep
Teaching equipment designer and manufacturer
Teaching equipment designer and manufacturer ELEVATORS MODULAR ELEVATOR: - COMPOSITION A LA CARTE - DIFFERENT TECHNOLOGIES OF CABINETS - DIFFERENT TECHNOLOGIES OF MECHANISMS OF DOORS - COMMON OPERATIVE
Strokes Strokes Double acting. Min. stroke with 2 sensors Ø Single acting. Single acting
S version Type... Standards... Cushioning... Rated temperature... Fluid... Working pressure... Proximity switch... Mounting and accessories... Materials... Single and double acting pneumatic microcylinders,
IAE-101: Electrical Fundamentals for Non-Electrical Personnel
IAE-101: Electrical Fundamentals for Non-Electrical Personnel Abstract Today s world of rapidly evolving technology poses a wealth of challenges just to remain competitive in the marketplace. Everyone
DATA SHEET TB 26l. BR 26l, BR 26t, BR 26v, BR 26x Multi-port ball valve Ball valve in horizontal and vertical version. Application
DATA SHEET TB 26l BR 26l, BR 26t, BR 26v, BR 26x Multi-port ball valve Ball valve in horizontal and vertical version Application Tight-closing multi-port ball valve made of stainless steel for aggressive
bar -20 C C ( C for high temperature version) 1000 mm
Technical details Cylinders > piston rod cylinders > ISO 15552, double acting Operating pressure Temperature range Max. stroke Medium Materials 1... 10 bar -20 C... +80 C ( 0... +150 C for high temperature
Sms Products India Pvt Ltd
+91-8049471465 Sms Products India Pvt Ltd https://www.indiamart.com/smsproductsindia/ We SMS Products India (P) Ltd. are manufacturing a high quality assortment of Hydraulic Cylinders and Hydraulic Power
Electrohydraulics Basic Level Textbook TP 601
Electrohydraulics Basic Level Textbook TP 601 Festo Didactic 093611 en Order No.: 093611 Edition: 03/2006 Authors: C. Löffler, D. Merkle, G. Prede, K. Rupp, D. Scholz Graphics: Doris Schwarzenberger Layout:
The linear motor technology for industrial applications
Industrial Linear Motors Purely electrical drive system Freely positionable along the entire stroke For precise and dynamic positioning tasks Direct drive technology provides longer life Clean room certification
PP Series Pneumatic Actuators
PDF Published February 4, 07 PP Series Pneumatic Actuators for Chemline ball valves up to 6 MATERIAL: Polyamide SERIES: PPS Spring Return PPD Double Acting CONTROL PRESSURE: 40 to 0 psi OUTPUT TORQUES:
Industrial furnaces. Innovative solutions for your success
Industrial furnaces Innovative solutions for your success Toni Pappert Industry Manager Industrial furnaces Phone: +49 661 6003-312 Email: toni.pappert@jumo.net Dear Reader, Glass, ceramic, clay and steel
VALVES SERIES 70, SOLENOID/PNEUMATIC
VALVES SERIES 7, SOLENOID/PNEUMATIC TECHNICAL DATA Pressure range: monostable bistable asserved Minimum actuation pressure Operating temperature range Nominal diameter Conductance C Critical ratio b Flow
CONTROLS. Bray Pneumatic Actuators & Accessories. Technical Manual. A Division of BRAY INTERNATIONAL, Inc.
CONTROLS A Division of BRAY INTERNATIONAL, Inc. Bray Pneumatic Actuators & Accessories Technical Manual TM-056 Pneumatic Actuator - 08//00 Bray Pneumatic Actuators & Accessories Technical Manual - Table
Humidity Cabinet HYGROTHERM
Humidity Cabinet for humidty tests with international standards Humidity Cabinet HYGROTHERM 519 529 HYGROTHERM also available as semi-automatic or fully-automatic version (Mod. 519 SA / 519 FA) HYGROTHERM