STUD BRACKETS & TRACK
|
|
- Elfrieda Ryan
- 5 years ago
- Views:
Transcription
1 CASEMENT AWNING Truth realizes that some profile designs may require a unique stud bracket or track design therefore, Truth has developed a variety of shapes and styles to meet these needs. These brackets and track are intended to serve merely as options to the various recommended hardware which Truth has indicated for operators requiring this product. The drawings on the accompanying pages should provide you will all the technical information that you require. However, if you wish further technical assistance in selecting a bracket that works best with your window, please contact Truth. Most brackets are available in both a leftand right-hand version pay careful attention to this when ordering. WARRANTY: Protected under the terms of the Truth Warranty for Window and Door Manufacturers and Authorized Distributors. Refer to Truth s Terms and Conditions for further details. E-GARD HARDWARE: Truth s E-Gard Hardware has a multistage coating process that produces a superior physical and aesthetic finish. Plus, it is resistant to a wider range of corrosive materials, including industrial cleaning materials and environmental pollutants. This proprietary process has been tested to be approximately three times better than common zinc plated finishes. ORDERING INFORMATION: 1. Order part number based from information on accompanying drawings. XX - denote corrosion resistant coating. 92 is the finish code for Truth s corrosion resistant E-Gard Hardware. TRUTH TIPS: 1. For accurate hardware placement in vinyl or metal applications, pre-drilling of the window profile is recommended. 2. For vinyl window applications, mounting screws should pass through two PVC walls, or one PVC wall and one insert wall. For this reason, it may be necessary to use a longer screw than is recommended. 3. For metal window profiles, Truth recommends machine screws. However, in most applications, sheet metal screws will provide adequate holding power. 4. When selecting mounting screws for Truth hardware, coating compatibility is one of the most important criteria. For best corrosion resistance the coating on the screws should be the same as the coating on the hardware. For more information see Tech Note #11. 48
2 FIG. 1 SINGLE ARM OPERATOR TRACK XX (20.6mm) (289.1mm).670 WOOD: 4 (P/N XX) #7 X.875 PHILLIPS, FLAT PVC & METAL: 4 - #7 PHILLIPS, FLAT HEAD (LENGTH AND THREAD TYPE DETERMINED DETACH SLOT LIMITER TRACK ALSO AVILABLE FIG. 2 SINGLE ARM OPERATOR TRACK XX (124.0mm).810 (20.6mm) (289.0mm) (124.0mm) WOOD: 3 (P/N XX) #7 X.875 PHILLIPS, FLAT PVC & METAL: 3 - #7 PHILLIPS, FLAT HEAD (LENGTH AND THREAD TYPE DETERMINED FIG. 3 SINGLE ARM OPERATOR TRACK XX (349.3mm) DETACH SLOT (104.8mm).680 (17.3mm) (104.8mm) (104.8mm).670 WOOD: 4 (P/N XX) #7 X.875 PHILLIPS, FLAT PVC & METAL: 4 - #7 PHILLIPS, FLAT HEAD (LENGTH AND THREAD TYPE DETERMINED DETACH SLOT FIG. 4 SINGLE ARM OPERATOR TRACK XX.668 WOOD: 3 (P/N XX) #7 X.875 PHILLIPS, FLAT PVC & METAL: 3 - #7 PHILLIPS, FLAT HEAD (LENGTH AND THREAD TYPE DETERMINED.810 (20.6mm).670 DETACH SLOT (225.4mm) (80.9mm) 48a
3 FIG. 5 STUD BRACKET XX, XX FIG. 6 STUD BRACKET XX, XX.385 (9.8mm) (17.5mm) (11.1mm) LEFT HAND SHOWN (11.1mm) (17.5mm).294 (7.5mm) 1 (4.8mm) LEFT HAND SHOWN WOOD: 2 (P/N XX) #7 X.875 PHILLIPS, FLAT WOOD: 2 (P/N XX) #7 X.875 PHILLIPS, FLAT NOTE: RIGHT HAND NOTE: RIGHT HAND FIG. 7 STUD BRACKET XX, XX FIG. 8 STUD BRACKET XX, XX (SNAP STUD).164 (4.2mm).104 (2.6mm) 2 (61.9mm) (47.8mm).060 (1.5mm).750 (19.1mm).690 (17.5mm) LEFT HAND SHOWN (3.0mm).312 (7.9mm) (69.9mm) (12.7mm).750 (19.1mm) NON HANDED WOOD: 3 (P/N XX) #10 X.750 PHILLIPS, PAN PVC & METAL: 3 - #10 PHILLIPS, PAN HEAD WOOD: 3 (P/N XX) #8 X 1.0 PHILLIPS, FLAT PVC & METAL: 3 - #8 PHILLIPS, PAN HEAD NOTE: RIGHT HAND NOTE: SHOWN 48b
4 FIG. 9 STUD BRACKET XX, XX FIG. 10 STUD BRACKET XX, 104.XX 2 [61.9 mm] [47.8 mm] [4.8 mm].180 [4.6 mm].125 [3.2 mm] 1 [41.3 mm] [9.5 mm] [11.1 mm].358 [9.1 mm] [28.5 mm] FIG. 11 STUD BRACKET XX, XX.104 [2.6 mm].280 [7.1 mm] 4 [112.7 mm].744 [18.9 mm].090 [2.3 mm] [36.6 mm] 1 [38.1 mm].532 [13.5 mm] LEFT HAND SHOWN WOOD: (QTY 3)(P/N XX)#10 X.750 PHILLIPS, PAN HEAD, SHEET METAL PVC & METAL: (QTY 3) #10 PHILLIPS, PAN HEAD (LENGTH AND NOTE: RIGHT HAND [65.0 mm] FIG. 12 STUD BRACKET XX, XX [75.4 mm] [55.5 mm] [15.9 mm] LEFT HAND SHOWN WOOD: (QTY 2)(P/N XX) #7 X.875 PHILLIPS, FLAT HEAD, SHEET METAL PVC & METAL: (QTY 2) #7 PHILLIPS, FLAT HEAD (LENGTH AND NOTE: 104 RIGHT HAND NOTE: RIGHT HAND [12.7 mm].186 [4.7 mm] 48c [17.5 mm] [25.4 mm] [15.9 mm] LEFT HAND SHOWN WOOD: (QTY 3)(P/N XX) #8 X.750 PHILLIPS, PAN HEAD, SHEET METAL PVC & METAL: (QTY 3) #8 PHILLIPS, PAN HEAD (LENGTH AND NOTE: RIGHT HAND.336 [8.5 mm].062 [1.6 mm] [27.8 mm] 2X.217 [5.5 mm] LEFT HAND SHOWN WOOD: (QTY 3)(P/N XX) #7 X.750 PHILLIPS, FLAT HEAD, SHEET METAL PVC & METAL: (QTY 3) #7 PHILLIPS, FLAT HEAD (LENGTH AND
5 FIG. 13 STUD BRACKET XX, XX 1 [41.3 mm] [73.0 mm] [11.1 mm] [4.8 mm] FIG. 14 STUD BRACKET XX, XX.298 [7.6 mm] [73.0 mm] [11.1 mm].298 [7.6 mm] [55.5 mm] [27.8 mm].336 [8.5 mm].062 [1.6 mm] [75.4 mm].217 [5.5 mm] [15.9 mm] [9.5 mm] [12.7 mm] [17.5 mm] LEFT HAND SHOWN WOOD: (QTY 2)(P/N XX)#7 X.875 PHILLIPS, FLAT HEAD, SHEET METAL PVC & METAL: (QTY 2)#7 PHILLIPS, FLAT HEAD (LENGTH AND NOTE: RIGHT HAND FIG. 15 STUD BRACKET XX, XX.393 [10.0 mm] [28.6 mm] [35.1 mm] LEFT HAND SHOWN WOOD: (QTY 2)(P/N XX)#7 X.875 PHILLIPS,FLAT HEAD, SHEET METAL PVC & METAL: (QTY 2)#7 PHILLIPS, FLAT HEAD (LENGTH AND NOTE: RIGHT HAND 2 [57.2 mm] [75.4 mm] [55.5 mm] [27.8 mm].336 [8.5 mm].063 [1.6 mm].062 [1.6 mm].313 [8.0 mm].217 [5.5 mm] LEFT HAND SHOWN [12.7 mm] WOOD: (QTY 2)(P/N XX)#7 X.875 PHILLIPS,FLAT HEAD, SHEET METAL PVC & METAL: (QTY 2)#7 PHILLIPS, FLAT HEAD (LENGTH AND NOTE: RIGHT HAND.186 [4.7 mm] NOTE: RIGHT HAND.358 [9.1 mm] [17.5 mm] LEFT HAND SHOWN WOOD: (QTY 2)(P/N XX)#7 X.875 PHILLIPS, FLAT HEAD, SHEET METAL PVC & METAL: (QTY 2)#7 PHILLIPS, FLAT HEAD (LENGTH AND FIG. 16 STUD BRACKET XX, XX [28.7 mm] [35.1 mm] 48d
6 FIG. 17 STUD BRACKET XX, XX FIG. 18 STUD BRACKET XX, XX (17.5mm) (11.1mm) (28.6mm) (6.4m) (30.2mm).188 (4.8mm).370 (9.4mm).312 (7.9mm) (69.9mm) 3 (85.7mm) WOOD: 2 (P/N XX) #7 X.875 PHILLIPS FLAT NOTE: RIGHT HAND FIG. 19 STUD BRACKET XX, XX.358 (9.1mm) LEFT HAND SHOWN 1 WOOD: 2 (P/N XX) #7 X.875 PHILLIPS FLAT LEFT HAND SHOWN 1 NOTE: RIGHT HAND FIG. 20 STUD BRACKET XX, XX (28.6mm) (28.6mm) (4.9mm).813 (20.7mm).160 (4.1mm).410 (10.4mm) WOOD: 2 (P/N XX) #7 X.875 PHILLIPS FLAT LEFT HAND SHOWN NOTE: RIGHT HAND WOOD: 2 (P/N XX) #7 X.875 PHILLIPS FLAT LEFT HAND SHOWN NOTE: RIGHT HAND 48e
7 FIG. 21 STUD BRACKET XX, XX FIG. 22 STUD BRACKET XX, XX (75.4mm).310 (7.9mm) (3.8mm).812 (20.6mm) 1 (28.6mm) (55.5mm).267 (6.8mm) (27.8mm).117 (3mm) (12.7mm) LEFT HAND SHOWN LEFT HAND SHOWN WOOD: 3 (P/N XX) #7 X.875 PHILLIPS, PAN PVC & METAL: 3 - #7 PHILLIPS, PAN HEAD NOTE: RIGHT HAND WOOD: 3 (P/N XX) #7 X.875 PHILLIPS, PAN PVC & METAL: 3 - #7 PHILLIPS, PAN HEAD NOTE: RIGHT HAND FIG STUD STUD BRACKET BRACKET XX, XX, XX XX FIG STUD STUD BRACKET BRACKET XX, XX 0.XX, XX (16.8mm) (60.5mm) (26.5mm) (3.0mm) 1 (38.1mm) (76.2mm).750 (19.1mm) (25.4mm).813 (20.7mm).230 (5.8mm) LEFT HAND SHOWN RIGHT HAND SHOWN WOOD: 3 (P/N XX) #7 X.875 PHILLIPS, PAN PVC & METAL: 3 - #7 PHILLIPS, PAN HEAD NOTE: RIGHT HAND WOOD: 3 (P/N XX) #7 X.875 PHILLIPS, PAN PVC & METAL: 3 - #7 PHILLIPS, PAN HEAD NOTE: LEFT HAND 48f
8 FIG. 25 TRACK 30175, (4.2mm) A.640 (16.3mm) NOTCH IS TO ATTACH AND DETACH OPERATOR ARM AFTER TRACK IS INSTALLED ON THE WINDOW. BEFORE THE OPERATOR IS MOUNTED. ADJUSTMENT TRACK A (333.4mm) 8.5 (215.9mm) WOOD: 2 - #10 X PHILLIPS, PAN HEAD, STAINLESS STEEL PVC & METAL: 2 - #10 PHILLIPS, PAN HEAD 48g 700 WEST BRIDGE STREET, OWATONNA, MN TRUTH.COM
15 ELLIPSE DYAD OPERATOR CASEMENT AWNING
CASEMENT AWNING 5 ELLIPSE Truth s Ellipse Dyad Operator features a peak operating torque approximately 28% lower than the #5 Series Single Arm Operators, (depending on mounting locations). Profile changes
More information15 ELLIPSE SINGLE ARM OPERATOR CASEMENT
CASEMENT 5 ELLIPSE Made of the highest quality materials, the Ellipse Single Arm Casement Operator has provided years of continuous and trouble-free service for our customers. This operator will provide
More information24 MAXIM MULTI-POINT &
CASEMENT AWNING 24 MAXIM MULTI-POINT & Complementing the already popular Maxim Operator & Hinge System, the new Maxim Locking System proves to be the most attractive, easiest operating, highest performing,
More information2300/2320. MORTISE LOCKS AND HANDLESET ACCESSORIES (Keepers, Spacers, Adapters and Bumpers)
HANDLES & LOCKSETS MORTISE LOCK APPLICATIONS 2300/2320 Truth Hardware realizes that each profile in the marketplace may require its own particular hardware component due to the variety of mounting applications
More informationLOGO OPTIONS: TRUTH TIPS:
DOUBLE HUNG SLIDER 19 Truth Hardware s Positive Action Lock (PAL) Systems are some of the most versatile and easy to operate locking systems in the marketplace today. Available in the original Push Button
More informationSCISSORS ARM OPERATOR
AWNING 22 For the window design that requires a face-mounted operator, Truth has developed a special version of our Awning Roto Gear perator that incorporates the case from our 22 Series perators with
More informationLOGO OPTIONS: You can personalize the Fusion Lock with your logo. Truth s pad printing
DOUBLE HUNG SLIDER 19 Appropriately named the Fusion System, Truth Hardware has successfully merged two separate pieces of window hardware into one completely revolutionary system. Truth has designed a
More informationSIDE ADJUST TANDEM ROLLERS
ROLLERS FOR PATIO DOORS SIDE ADJUST Designed for easy installation and trouble-free service, these high quality radial ball bearing-equipped rollers encompass Truth Hardware s unique advantage in that
More information24 MULTI-POINT LOCKING SYSTEM CASEMENT
SEMENT 4 MULTI-POINT LOKING SYSTEM STYLISH & EFFIIENT With its sleek, low-profile design, homeowners will love the fact that in either the locked or unlocked position it doesn t interfere with curtains
More informationSIGNATURE SERIES PATIO DOOR HANDLE SETS
HANDLES & LOCKSETS MORTISE LOCK APPLICATIONS SIGNATURE SERIES PATIO Truth s new patio door handle sets are distinctive choices that add a unique signature to your patio doors. UNIQUE STYLING: The Signature
More informationCASEMENT WINDOW SYSTEMS
ENCORE DUA ARM OPERATOR All the strength and performance characteristics of Maxim, but with the flexibility of a snap fit cover and streamlined full-flip folding handle. 33% less effort to operate than
More informationORDERING INFORMATION:
OUBLE HUNG SLIER 9200 SASH & KEEPERS The options available on Truth Hardware s 9200 Series Sash Locks are virtually endless. There are bases with or without alignment lugs which are helpful in preventing
More information37/99 SASH CONTROL DEVICES
FRICTION DJUSTORS: Friction djustors are used either as a limit device or for additional friction in conjunction with certain types of hinging on projected windows. By tightening a screw in the sliding
More informationWall Mount with 2-8 arms, a 75/100mm Screen Pan and Tilt Head, and a Flat Printer Tray PN 80003
1-of-6 NOTE: Mounting plate is in the horizontal configuration. Can also be mounted vertically. 2-of-6 NOTE: Shown with mounting plate in vertical position PN 80003 with a 75/100mm VESA pan and tilt head
More informationTruth Hardware (Awning Window)
Truth Hardware (Awning Window) 20-1/2" Single Pull Lever Operator Contents: 1 operator; 1 hook and 1 set of installation screws. "Y" Dimension "Y" Finish Part No. Under 2" TH-23070 Over 2" TH-23069 Under
More informationALL PRODUCTS PATENT PENDING
1-of-5 7 Axis Ceiling Mount with Extendable Arm and Biased Pan and Tilt Head PN s 80104, 80104- Three different part numbers shown here with an 8 ceiling height & a 17 monitor 7 Axis Ceiling Mount with
More informationINSTALLATION INSTRUCTIONS C-DMM FORD INTERCEPTOR UTILITY SWING-OUT DASH MONITOR MOUNT
INSTALLATION INSTRUCTIONS C-DMM-123 2013-2018 FORD INTERCEPTOR UTILITY SWING-OUT DASH MONITOR MOUNT The Dash Monitor Mount bracket system requires two or three main parts that are sold separately. See
More informationINSTALL INSTRUCTIONS
INSTALL INSTRUCTIONS Models: 6005 & 6005TK (For Non Electric Mirrors) GM CK Body Style If your stock mirrors are stock electric the wrong set has been ordered. Do not attempt to manually extend or retract
More information62 Deck Idler Kit High Speed
Part No. 00 FORM NO. -899 6 Deck Idler Kit High Speed For Model 70 Serial No. 99000 to 99000 For Model 7 Serial No. 9900 to 99000 INSTALLATION INSTRUCTIONS Loose Parts Note: Use the chart below to identify
More informationAMPLIFIER A OR B SELECTOR
M O D E L ABA-1D ABA-1D AMPLIFIER A OR B SELECTOR NILES INSTALLATION & OPERATION GUIDE ABA-1D Speaker/Amplifier Selector S P E A K E R / A M P L I F I E R S E L E C T O R TABLE OF CONTENTS Introduction
More informationInstallation Manual for Philips SureSigns VS3/VS4/VM4/VM6/VM8/VSV VHM-25 Countertop Mount
3875 Cypress Drive Petaluma, CA 94954 800.228.2555 707.773.1100 Fax 707.773.1180 www.gcx.com Installation Manual for Philips SureSigns VS3/VS4/VM4/VM6/VM8/VSV VHM-25 Countertop Mount Install Time: 20-30
More informationInstallation Instructions
Equipment Required: Fastener Kit: F Wrenches: 15/16, 10 mm Drill Bits: 1/4 Other Tools: Drill, Reciprocating Saw 9464/9474 HIDE-A-GOOSE HITCH All Fasteners Typical, Both Sides WARNING: Under no circumstances
More informationInstallation Instructions
Equipment Required: Installation Instructions Fastener Kit: F Wrenches: 8mm, 13mm, 3/4, 15/16 Drill Bits: 1/4 Other Tools: Drill, Reciprocating Saw, File WARNING: Under no circumstances do we recommend
More informationSize Box Qty. Item# Less Box Box
Post Caps External Post Caps White Tan Stone 4 x 4 125 IVC0100 0.95 0.86 5 x 5 160 IVC0110 1.38 1.24 4 x 4 125 IVC0101 1.09 0.98 5 x 5 160 IVC0111 1.48 1.33 4 x 4 125 IVC0102 1.09 0.98 5 x 5 160 IVC0112
More informationInstallation Instructions
Roller & Roman Shades Lifting Systems Cassette EZ Lift Cordless EZ Pull Standard and Cassette R-Series Clutch SL-Series Clutch Spring Roller Fascias and Valances 3, 4 Flat and 4 Curved Fascia 5 Fascia
More informationInstallation Instructions
Equipment Required: Installation Instructions Fastener Kit: F Wrenches: 8mm, 13mm, 3/4, 15/16 Drill Bits: 1/4 Other Tools: Drill, Reciprocating Saw, File WARNING: Under no circumstances do we recommend
More informationInstallation Instructions
Equipment Required: Fastener Kit: F Wrenches: 15/16, 15/16 Crowfoot Adaptor Drill Bits: 1/4 Other Tools: Drill, Reciprocating saw Optional, Raise Bed: 18mm socket, 15 extension As an option you can loosen
More informationAC-20 Multi Point Actuator
29.6 (1.17) 51.1 (2.01) 29.6 (1.17) 51.1 (2.01) Cable B 52 27.3 (2.05) (.68) 27.3 (.68) 4X Ø 5.2 ± 0.1 (.210 ±.005) Cable A 29.6 (1.17) 17.3 (.68) 80.9 (3.19) 119 (4.7) (1.17) AC-20 Multi Point Actuator
More informationGMC Yukon
Torch Series LED Grille TOOLS REQUIRED: Flat Head Screwdriver Long Flat Head Screwdriver Phillips Screwdriver 7mm Socket 10mm Socket Ratchet & Extensions 3/16 Drill Bit Power Drill Cutting Wheel or Saw
More informationSpade Terminals: Locking
Spade Terminals: Locking S SERIES FEATURES Tongue snaps around the screw & terminal is locked into place until the mounting screw can be tightened down. vinyl (PVC) 300V, 75 C. INSULATION TYPE WIRE RANGE
More informationTechnical Service Bulletin
Source: Models: Subject: Division - Arcade, NY USA 4800, 4900 Series 185 amp - 320 amp Convert alternator to solid lead frame rectifiers This procedure will explain how to convert a 4000 series alternator
More informationTechnical Data. Sizes 2 in. to 24 in. (DN50 to DN600) Approvals UL and ULC Listed FM Approved
Worldwide Contacts www.tyco-fire.com Model TJP Resilient-Seated Gate Valves with Vertical or Cross Wall Post Indicator General Description TYCO Model TJP Resilient-Seated Gate Valves with Vertical and
More information»Product» Safety Warning
D9151 Installation Instructions 2006-2008 Dodge Ram 1500 1.5" Body Lift Read and understand all instructions and warnings prior to installation of product and operation of vehicle. Zone Offroad Products
More informationAutomatic Powder Spray Gun Extruded Support Kits
Instruction Sheet P/N 0-0 Automatic Powder Spray Gun Extruded Support Kits Introduction This product manual applies to the 0 mm vertical powder spray gun support kits, mounting bars and mounting kits for
More informationSRD Design CORPORATION. Fenestration Specialists!
SRD Design CORPORATION Fenestration Specialists! Series 5000 By Champion Window & Door Syosset, New York Design by: SRD Design 2002 SRD Design CORPORATION ENGINEERING ENGINEERING SPECIALISTS DIVERSITY
More information2000SR. Installation Instructions May Donovan Enterprises 3353 S.E. Gran Park Way Stuart, Florida
311499-Donovan 4/28/04 11:22 PM Page 1 Installation Instructions May 2003 Donovan Enterprises 3353 S.E. Gran Park Way Stuart, Florida 34997 1-800-327-8287 Visit our web site at: www.donovan-ent.com 311499-Donovan
More informationInstallation Instructions Factory Style Bow Kit
Installation Instructions Factory Style Bow Kit Vehicle Application: Jeep Wrangler JK 2 Door 2007 Current Part Number: 55000 Compatible with original equipment soft tops, 54722 Supertop NX and 79142 Sailcloth
More informationAV Series Dynamic Mount
60 AV Series Dynamic Mount Tilt and swivel Compact Intuitive grab and move operation enhances the user experience No knobs or tools required to reposition the display Consistent repeatable operation Factory
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS Universal Short Throw Projector Wall Mount Model: NORTH AMERICA 3130 East Miraloma Avenue Anaheim, CA 92806 USA USA and Canada Phone: 1-800-368-9700 Fax: 1-800-832-4888 Other
More informationSentry. Multi-Point Hinged Patio Door System
Sentry Multi-Point Hinged Patio Door System Inspired Hardware Since 1955, Truth Hardware has focused on the design and manufacture of the finest operating hardware for windows and patio doors. With engineering
More informationDODGE RAM 2500
81234007 2014-2015 DODGE RAM 2500 Congratulations - your new LevelTow Helper Springs are quality products capable of improving the handling and comfort of your vehicle. As with all products, proper installation
More informationUniversal Super Shield & Ultimate Aluminum w/electric Drive Conversion Kits , , Installation Instructions
WLH 09/19/16 111-0215 & 112-0215 607-0026 For technical support call us at (800) 368-3075 or visit our website at PullTarps.com. TABLE OF CONTENTS ***Assembly*** Conversion Kit-Universal Super Shield ***Wiring,
More informationDO NOT USE AS FREE STANDING SEAT. Pontoon Bench Seating must have railing or support to place back against for installation.
WARNING! DO NOT USE AS FREE STANDING SEAT Pontoon Bench Seating must have railing or support to place back against for installation. PLASTIC CORNER GUARDS ARE FOR SHIPPING PURPOSES ONLY THEY CAN BE REMOVED
More informationPARALLEL STAY. Parallel Opening Hinge for Commercial Applications
PARALLEL STAY Parallel Opening Hinge for Commercial Applications Cotswold parallel hinges provide natural ventilation whilst maintaining aesthetically pleasing sightlines for modern façade design. Parallel
More informationInstallation Guide 4097M
Installation Guide 4097M Kargo Master Rancho Cordova, CA 95742 800 343 7486 CustomerService@KargoMaster.com DATE: Installation Instructions 4097M *PLEASE READ ALL INSTRUCTIONS AND WARNINGS PRIOR TO ASSEMBLING,
More informationINSTALLATION INSTRUCTIONS ELITE FRONT BUMPER Part Number: w/ Grille Guard & w/o Grille Guard Application: Jeep JK 2007+
INSTALLATION INSTRUCTIONS ELITE FRONT BUMPER Part Number: 87750 w/ Grille Guard & 87775 w/o Grille Guard Application: Jeep JK 2007+ GENERAL SAFETY PRECAUTIONS Your safety, and the safety of others, is
More informationMOUNT BRACKET PARTS and HARDWARE: Installation parts with * come loose in hardware kit bag. Other parts are preassembled
INSTALL INSTRUCTIONS C-DMM-2006 Dash Monitor Mount 2017-2019 F-250, 350, 450 Pickup, F-450 and 550 Cab Chassis, 2015-2019 Ford F-150 and 2018-2019 Expedition Notes: 1. The C-DMM-2000 series Dash Monitor
More informationINFINITY MULTA SERIES
ASSEMBLY ASSEMBLY INSTRUCTIONS INSTRUCTIONS ASSEMBLY INSTRUCTIONS INFINITY MULTA SERIES Workstations, WORKSTATIONS, desks, DESKS, and AND tables TABLES with WITH powered POWERED ADJUSTMENT adjustment PARTS
More informationLOCKN LOAD FIRST TIME INSTALLATION
LOCKN LOAD TM TRACK MOUNTING KIT FORD RANGER PX / MAZDA BT-50 DUAL CAB 2011 + 2 BAR TRACK HEAVY DUTY ROOF RACK SYSTEM MAX VEHICLE ROOF LOAD RATING: 100KG TOTAL LOAD EQUALS WEIGHT OF ROOF RACKS + ACCESSORIES
More informationPFF WSP
3 February 2014 1050340 - FlowMax Fuel Filter Kit (I-00172) - 1 - Flowmax Filter Kits Installation Instructions This kit is designed for V3 Flomax pumps only P/N# P/N# 1050340-PFF 1050340-WSP PLEASE READ
More informationInstallation Manual for VHM-25 Series Arms Channel Mount
3875 Cypress Drive Petaluma, CA 94954 800.228.2555 707.773.1100 Fax 707.773.1180 www.gcx.com Installation Manual for VHM25 Series Arms Channel Mount Install Time: 1015 minutes The purpose of this manual
More informationInstallation Guide 4099H
Installation Guide 4099H Kargo Master Rancho Cordova, CA 95742 800-343-7486 CustomerService@KargoMaster.com DATE: Installation Instructions 4099H *PLEASE READ ALL INSTRUCTIONS AND WARNINGS PRIOR TO ASSEMBLING,
More informationInstallation Instructions
Equipment Required: Fastener Kit: F Wrenches: 15/16, 15/16 Crowfoot Adaptor Drill Bits: 1/4 Other Tools: Drill, Reciprocating saw Optional, Raise Bed: 18mm socket, 15 extension As an option you can loosen
More informationINSTALLATION INSTRUCTIONS CRL JACKSON P PANIC EXIT DEVICE
INSTALLATION INSTRUCTIONS CRL JACKSON 1095-1095P PANIC EXIT DEVICE crlaurence.com Phone: (800) 421-6144 Fax: (866) 921-0531 crlaurence.com usalum.com crl-arch.com 11M0246 ORDER OF AND INSTALLATION Tools
More informationPARALLEL STAY. Parallel Opening Hinge for Commercial Applications
PARALLEL STAY Parallel Opening Hinge for Commercial Applications Cotswold parallel hinges provide natural ventilation whilst maintaining aesthetically pleasing sightlines for modern façade design. Parallel
More informationCIC 200 SLOTTED BINDING HEAD MACHINE SCREW ASSORTMENT
A15-1 TM CIC 200 SLOTTED BINDING HEAD MACHINE SCREW ASSORTMENT P/N 7705 Precision, burr-freethreads for exact fit Special chromate plating resists rust and corrosion for easier removal 1180 6-32 x 1/2
More informationSAFETY THIS PRODUCT IS FOR OFFROAD USE ONLY. ALL LIABILITY FOR INSTALLATION AND USE RESTS WITH THE OWNER.
SAFETY Your safety and the safety of others is very important. In order to help you make informed decisions about safety, we have provided installation instructions and other information. These instructions
More information1 cam motorcycle tie-down with Built-in Soft-Loop feature. Similar to Original Cam Tie-Down. Protects chrome & paint finishes. 5 1/2 ft.
1 Motorcycle/ATV Tie-Downs All 1 M&R Motorcycle tie-downs utilize 1200 lb. vinyl S hooks, 1500 lb. rated cams or 3300 lb. rated ratchets. Each tie-down is a 1200 lb. rated assembly and is available in
More information8091, X4 Pocket Door Slide
8091, 8092 4X4 Pocket Door Slide Number Mounting Action Load Rating Maximum Dimensions Clearance Finish Key Features 8091 Packaged Without Hinge or Hinge Base 8092 Packaged With Attached Hinge Base Side
More informationTIP-OUT GLASS WINDSHIELD KIT
TIP-OUT GLASS WINDSHIELD KIT P/N 2881108 APPLICATION Verify accessory fitment at Polaris.com. BEFORE YOU BEGIN Read these instructions and check to be sure all parts and tools are accounted for. Please
More informationInstallation Instructions
Equipment Required: Fastener Kit: F Wrenches: 3/4, 15/16, 10mm, 18mm Drill Bits: 1/4 Other Tools: Drill, Reciprocating saw 9465/9475 HIDE-A-GOOSE HITCH INSTALLATION All Fasteners Typical, Both Sides WARNING:
More informationMyriad Keyboard and Mouse Tray, Articulating Arm Installation Instructions
670 Zinser Street Schofield, WI 54476 Version Dated: 4/2/15 Myriad Keyboard and Mouse Tray, Articulating Arm Installation Instructions Read all the instructions before beginning. Hardware Pack # 50525
More informationInstallation Instructions Studio Makeup Station
Installation Instructions Studio Makeup Station 30" and 36" Models 5-light 30" Studio Makeup Station 8-light 30" Studio Makeup Station 6-light 36" Studio Makeup Station 9-light 36" Studio Makeup Station
More informationM-9603-FST FOCUS ST COLD AIR INTAKE KIT INSTALLATION INSTRUCTIONS
M-9603-FST Please visit www.fordracingparts.com for the most current instruction information.!!! PLEASE READ ALL OF THE FOLLOWING INSTRUCTIONS CAREFULLY PRIOR TO INSTALLATION. AT ANY TIME YOU DO NOT UNDERSTAND
More informationINLET DUCT FOR CISCO 6880 Part Number(s) DIRLC25S23W
INLET DUCT FOR CISCO 6880 Part Number(s) DIRLC25S23W Panduit Corp. 2015 INSTALLATION INSTRUCTIONS For a Net-Access Legacy or Net- Access N-Type Switch Cabinet (CN*** or N***) 6880 Inlet Duct Component
More informationINSTALLATION INSTRUCTIONS AND OWNER S MANUAL
INSTALLATION INSTRUCTIONS AND OWNER S MANUAL Thank you for purchasing ADARAC Truck Bed Rack. Agri-Cover, Inc. proudly manufactured this product using superior quality materials and workmanship. With proper
More informationINLET DUCT FOR CISCO 9513 SWITCH Part Number: DIBBC2314S21W
INLET DUCT FOR CISCO 9513 SWITCH Part Number: DIBBC2314S21W Panduit Corp. 2012 INSTALLATION INSTRUCTIONS For Either a Net-Access Legacy or Net-Access N-Type Switch Cabinet (CN** OR N**) 9513 Inlet Duct
More informationOPERATOR ADAPTER ABF
OPERATOR ADAPTER ABF Installation Instructions for Allen-Bradley Bulletin 1494F Series B Disconnect Switches (For parts list, see Page 2) Rev. B 2018 Hoffman Enclosures Inc. PH 7634222211 nvent.com/hoffman
More informationREVISION LIST CHAPTER 15: SEATS AND SEAT BELTS
REVISION LIST CHAPTER 15: SEATS AND SEAT BELTS The following list of revisions will allow you to update the Legacy construction manual chapter listed above. Under the Action column, R&R directs you to
More informationSuperduty Coilover Conversion. Ford F-150/ F-350 Superduty 4WD Part#:
Part#: 123612 Superduty Coilover Conversion Ford F-150/ F-350 Superduty 4WD 2005-2016 Rev. 011018 491 W. Garfield Ave., Coldwater, MI 49036. Phone: 517-279-2135 Web: www.bds-suspension.com. E-mail: tech-bds@sporttruckusainc.com
More informationCircle & Oval Windows (1991 to Present)
Circle & Oval Windows (1991 to Present) Parts Catalog Main Menu Section TOC Search What s in This Section Circle and Oval Windows........................................... Page 3 Parts Illustration...........................................................
More informationPart # C-10 Level 2 Complete Air Suspension System
350 S. St. Charles St. Jasper, In. 47546 Ph. 812.482.2932 Fax 812.634.6632 www.ridetech.com Part # 11340299 63-70 C-10 Level 2 Complete Air Suspension System Front Components: 1 11330999 Front CoolRide
More informationInstallation Instructions
Roller & Roman Shades Lifting Systems Cassette and Sure-Lift EZ Lift Cordless EZ Pull Standard and Cassette R-Series Clutch SL-Series Clutch Spring Roller Fascias and Valances 3, 4 Flat and 4 Curved Fascia
More information»Product» Safety Warning
D9151 Installation Instructions 2006-2008 Dodge Ram 1500 1.5" Body Lift Read and understand all instructions and warnings prior to installation of product and operation of vehicle. Zone Offroad Products
More informationSHIMLESS INDUSTRIAL LINEAR BEARINGS - PATENT PENDING
08 LINEAR MOTION SHIMLESS INDUSTRIAL LINEAR BEARINGS - PATENT PENDING Shimless Industrial Linear Bearings are designed to be used in both low and high acceleration/deceleration applications. The Shimless
More informationTOOLS REQUIRED: Phillips Screw Driver Standard Socket set T-20 Torx Bit Metric Socket set Wire Cutters Wire Crimping tool
INSTALL INSTRUCTIONS C-VS-1200-INUT 2013-2018 FORD INTERCEPTOR UTILITY Fits Standard Interior and Optional Interior Upgrade (Code 65U) Vehicle Specific Console 12 inches of Equipment mounting space TOOLS
More informationInstallation Instructions
Important Parts Installation Instructions INSTALLATION REQUIRES WELDING by a qualified welder or metal fabricator. Weld-on installation is strongly recommended for maximum strength and reinforcement of
More informationPHILLIPS FLAT HEAD. Telephone Fax:
PHILLIPS FLAT HEAD MACHINE TYPE A WOOD MACHINE TYPE A 82 TAPPING - 82 MACHINE & SCREW 82 82 TAPPING UNDERCUT UNDERCUT TAPPING - 100 SIZE CTSK. CTSK. 82 - CTSK. CSK. CTSK. CTSK. 0 3P 00-4 3P 00-4 3P 00-4
More informationDodge SuperRail Mounting Kit #3516
1995-2002 Dodge SuperRail Mounting Kit #3516 #3600 SuperGlide (24K) Gross Trailer Weight (Maximum) Vertical Load Weight (Max. Pin Weight) 24,000 lbs. 6,000 lbs. Installation Instructions SPECIFICATIONS
More informationAriel Sliding Patio Doors
Ariel Sliding Patio Doors REPLACEMENT PARTS CATALOG 2-Panel Unit... 2 3-Panel Unit... 4 4-Panel Unit... 6 Screens... Back Cover Unit Sizes... Back Cover Notice: The replacement parts shown herein are for
More informationIron GEN III - Technical Notes
DART Iron GEN III - Technical Notes Deck Height... 9.240" Bore... 4.000 & 4.125 Main Bearing Size... LS-1 (2.558" 2.559") Weight... 227lbs Largest Recommended Bore..... 4.185" Largest Recommended Crank
More informationINSTALLATION & OWNER S MANUAL
INSTALLATION & OWNER S MANUAL CAB INSTALLATION INSTRUCTIONS KUBOTA GRAND L 30 SERIES HARD SIDED CAB ENCLOSURE (p/n 1KU3AS) SOFT SIDED CAB ENCLOSURE (p/n 1KU3SS) This Curtis Cab is designed and manufactured
More informationWindow Replacement Hardware
Hand Finish 36-168-1 Shown Bronze 36-168-2 Shown Gold 36-168-3 Shown White 36-169-3 Opposite White 36-168-5 Shown Bright Brass Lever Operators Note: See lever operator brackets on page 197. Hand Finish
More informationSCC Inc. BRx Series. Technical Instructions. Document No. CPBK-2000 September 15, BR-AS Bracket Assemblies for use with SQM Actuators
SCC Inc. BRx Series BR-AS Bracket Assemblies for use with SQM Actuators Technical Instructions September 15, 2015 Description Features Application BRx series bracket assemblies installed with Cxx series
More informationInstallation Instructions
Equipment Required: Fastener Kit: F Wrenches: 3/4, 15/16 Drill Bits: 1/4 Other Tools: Drill Installation Instructions Short & Long Bed All Megacabs 9464/9474 HIDE-A-GOOSE HITCH INSTALLATION WARNING: Under
More informationPRODUCTS FOR PV SOLAR MOUNTING APPLICATIONS ROOF MOUNT SYSTEMS...3. GROUND and pole MOUNT SYSTEMS...5. L Feet...9. Corrugated/IBR Roof Mounts...
S 1 Index PRODUCTS FOR PV SOLAR MOUNTING APPLICATIONS ROOF MOUNT SYSTEMS...3 GROUND and pole MOUNT SYSTEMS...5 Power Rail Module Mounting System...6 Power Rail Extrusions...7 Power Rail Commercial Extrusions...7
More informationWall Mount with a 7 axis extendable arm and a 75/100mm VESA Biased Screen Pan and Tilt Head PN s 80005, &
1-of-8 Display screen not included PN 80005 shown. Also available: 30 to 36 length - PN 80005-3036 36 to 42 length - PN 80005-3642 2-of-8 General Features This wall mount can be used as a universal support
More informationCare Instruction: Wash vehicle roof prior to installing Rhino Tracks.
Important: Please read these instructions carefully prior to installation. Please refer to your fitting instruction to ensure that the roof racks are installed in the correct locations. Check the contents
More informationInstallation Instructions
Equipment Required: Fastener Kit: F Wrenches: 15/16, 10 mm Drill Bits: 1/4 Other Tools: Drill, Reciprocating Saw 9464/9474 HIDE-A-GOOSE HITCH INSTALLATION All Fasteners Typical, Both Sides WARNING: Under
More informationINSTRUCTION PLASTIC BATTERY BOX & CHARGER KIT
LIFT CORPORATION Sht. 1 of 9 DSG# M-11-09 Rev. B Date: 08/12/13 INSTRUCTION PLASTIC BATTERY BOX & CHARGER KIT KIT P/N 285131-01 NOTE: Parts shown on sheets 1 and 2 are shipped as loose parts. Electrical
More informationThresholds & Weatherstripping
Thresholds & Weatherstripping TABLE OF CONTENTS A Astragal...21, 23-27 B Barrier Free Ramps... 9 Bumper Thresholds...9-10 Bumper/Stop Strips... 10 C Carpet Thresholds... 10-11 Cast Abrasive Aluminum Thresholds
More informationINSTALLATION INSTRUCTIONS
Product: Steering Stabilizer Relocation Kit Part Number: JKSOGS900 (JKSOGS162/JKSJSPEC1000/JKSOGS924) INSTALLATION INSTRUCTIONS Applications: Wrangler JK, 2007+ Welcome CONGRATULATIONS on purchasing a
More informationINSTALLATION GUIDE P1000 PRO-CELL CURRENT FORD POLICE UTILITY INTERCEPTOR. pro-gard.com STRONG RELIABLE SECURE
INSTALLATION GUIDE P1000 PRO-CELL 2013 - CURRENT FORD POLICE UTILITY INTERCEPTOR STRONG RELIABLE SECURE THESE COMPONENTS ARE REQUIRED TO INSTALL THE PRO-GARD PARTITION SYSTEM WB4711-01D WB4711-01P 4K47UINTPRO
More informationShort-throw Shifter Installation Guide
Short-throw Shifter Installation Guide Removal Procedure 1) Remove the shift control knob. A. Lift up on the rear portion of the shift control closeout boot retaining ring and detach the retaining ring
More informationAnother NEW and EXCITING solution from Metallics! Tired of searching for the right Air Handling Cable Ties? Here they are!
Metallics! Standard Mounting Hole Low Profile Air Handling Cable Ties (Plenum Rated) [ ] CONTRACTOR APPROVED Ideal Application: Air Handling Spaces, above drop ceilings and below raised flooring Meets
More informationSUPPORTS, CANOPY W/CABLE ASSEMBLY INSTRUCTIONS KIT P/N
SUPPORTS, CANOPY W/CABLE ASSEMBLY INSTRUCTIONS KIT P/N 512-00010-00 CANOPY SUPPORTS INSTALLATION AND ADJUSTMENT Tools required: 1-7/8 open end wrench 1-3/4 open or box end wrench (or a rachet and 3/4 socket)
More informationInstallation Instructions
Equipment Required: Fastener Kit: F Wrenches: 3/4, 15/16 Drill Bits: 1/4 Other Tools: Drill, Reciprocating saw WARNING: Under no circumstances do we recommend exceeding the towing vehicle manufacturers
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS Single-Stud/Dual-Stud Short-Throw Projector Wall Mount Model: EST100/EST200 NORTH AMERICA 3130 East Miraloma Avenue Anaheim, CA 92806 USA USA and Canada Phone: 1-800-368-9700
More informationUniversal Mounting Kit #0520
Universal Mounting Kit #0520 #0503 SuperGlide (25.5K) #0515 SuperGlide Low Profile (25.5K) Gross Trailer Weight (Maximum) Vertical Load Weight (Max. Pin Weight) 25,500 lbs. 6,375 lbs. Gross Trailer Weight
More informationINSTALLATION INSTRUCTION 88146
INSTALLATION INSTRUCTION 88146 Rev H FOR RANCHO SUSPENSION SYSTEM RS6547: 4WD SUBURBAN/YUKON XL, 4WD TAHOE/YUKON, & 4WD AVALANCHE READ ALL INSTRUCTIONS THOROUGHLY FROM START TO FINISH BEFORE BEGINNING
More information