Wall Mount with 2-8 arms, a 75/100mm Screen Pan and Tilt Head, and a Flat Printer Tray PN 80003

Size: px

Start display at page:

Download "Wall Mount with 2-8 arms, a 75/100mm Screen Pan and Tilt Head, and a Flat Printer Tray PN 80003"

Lee Shaw
5 years ago
Views:

1 1-of-6 NOTE: Mounting plate is in the horizontal configuration. Can also be mounted vertically.

2 2-of-6 NOTE: Shown with mounting plate in vertical position PN with a 75/100mm VESA pan and tilt head and a Flat Printer Tray. PRODUCT SPECIFICATIONS General Features This wall mount can be used as a universal support system for a Printer and VESA compatible monitor, touchscreen or terminal for Point of Sale / POS, Kitchen Display Systems / KDS in commercial kitchens, retail, restaurants, offices, industry, shops, medical, maritime, schools, laboratory and many other applications. All wall mounting systems can be ordered with an optional Stud Bridge Mounting Plate (PN 50546) that can support multiple mounts and attaches across a pair of vertical wall studs spaced at 16" on center. This hardware and bracket assembly supports up to 15 lbs. on each arm. Mounting Plate Features The three position mounting plate can support 1 or 2 arms and can may be rotated and installed vertically or horizontally to create a wider variety of mounting options. This assembly supports touch screens, terminals or flat panel monitors up to approximately 22 or 15lbs. (some images are shown with a 17 screen installed). Attaches to a wall or any other flat vertical surface.

3 3-of-6 Adjustable 8 Arm Features The adjustable 8 arm can be easily adjusted side to side and locked in any position at the mounting surface with the five point hand knob. A pair of thick Nitrile rubber washers provide an adjustable clutching action that secures the side to side pan position of the arm disc plates inside of the stand off bracket. The arm position can also be permanently secured by tightening the lock screw in the stand off bracket to secure it into one of the holes in the disc plate on the end of the arm. Standard Pan and Tilt Head Features This assembly includes a 75/100mm VESA compatible screen pan and tilt head. If your assembly includes an adaptor plate for a proprietary screen type; please refer to the pages that include information specific to that application. The screen Pan Position can be easily adjusted side to side and locked in any position with the five point hand knob. The pan position can also be permanently secured by tightening the lock screw in the base of the head to secure it into one of the holes in the round plate on the end of the arm. The screen Tilt Position can be easily adjusted up and down and locked in any position with the two four point hand knobs. The tilt position can also be permanently secured by tightening the lock screws on the sides of the head to secure it into one of the holes in the sides of the base bracket. Thick Nitrile rubber washers provide an adjustable clutching action that secures the up and down tilt and side to side pan position of the head.

4 4-of-6 Flat Printer Tray Features The interior dimensions of the Flat Printer Tray are 6½ Wide by 10¼ Long by 1 Deep. The 8 arm supporting the Printer Tray can be easily adjusted side to side and locked in any position at the mounting surface with the five point hand knob; the position can also be permanently secured by tightening the lock screw. The Flat Printer Tray position can be easily adjusted side to side and locked in any position at the end of the arm with the five point hand knob under the tray; the position can also be permanently secured by turning the lock screw on the bottom bracket of the tray into one of the holes in the end of the arm. The printer tray includes multiple tie points form adding cable ties to secure the extra cabling and power supply. Optional Adjustable Tilting Printer Mounting Tray features supply. The tilting printer tray also makes a great telephone mount. The sides of the printer tray adjust without tools to grip the sides of any printer from 5 to 9 ½ wide. The tilting printer tray position can be easily adjusted side to side and locked in any position at the end of the arm with the five point hand knob under the tray. The Tilt angle of the Printer Tray can be easily adjusted up and down and locked in any position with the two four point hand knobs on the sides of the tray. The tilting printer tray includes multiple tie points form adding cable ties to secure the extra cabling and power Add an optional second arm with a screen pan and tilt head to support a terminal or screen right next to the printer for a basic kiosk solution. To order the adjustable Tilting printer tray use P/N:

5 5-of-6 Examples of other mounting options with arms that can support either Pan and tilt heads for screens or Trays for printers; more available on our website.

6 6-of-6 MORE MOUNTING OPTIONS: All of our screen pan and tilt heads can be used with any of the following mounting systems.

ALL PRODUCTS PATENT PENDING

ALL PRODUCTS PATENT PENDING 1-of-5 7 Axis Ceiling Mount with Extendable Arm and Biased Pan and Tilt Head PN s 80104, 80104- Three different part numbers shown here with an 8 ceiling height & a 17 monitor 7 Axis Ceiling Mount with