Installation Guide GE Healthcare Carescape Single Display Roll Stand Kit

Size: px
Start display at page:

Download "Installation Guide GE Healthcare Carescape Single Display Roll Stand Kit"

Transcription

1 Installation Guide GE Healthcare Carescape Single Display Roll Stand Kit The purpose of this guide is to describe assembly of the Roll Stand. WARNING - EXCESSIVE LEAKAGE CURRENT - DO NOT use multiple socket outlet or extension cord to power medical equipment attached to roll stands. Parts Reference The following parts and hardware will be used in this installation procedure (major components shown): Item # Description Qty 1 Dual Channel Column, 46'' 1 2 Roll Stand Base lbs Counterweight 2 4 1/4-20 x 1-1/4'' Socket Head Cap Screw (SHCS) 6 5 1/4-20 x 2-3/4'' SHCS /4'' Split Lock Washer 4 7 Base Unit Mount Handle, Roll Stand 1 9 Display Mounting Bracket with Handles 1 10 M4 x 14 mm Flat Head Machine Screw (FHMS) 4 11 Mounting Adapter, VESA-compatible 1 12 #8-32 x 5/16'' Pan Head Machine Screw (PHMS) 4 13 Power Supply Bracket (includes attached cable clamp) 1 14 #10-32 x 5/16'' FHMS 2 15 Cable Clamp (not shown) 2 16 #10-32 x 5/16'' PHMS 2 17 Cable Management Arm 1 18 Accessory Bin 1 19 PDM Mount 1 20 Mini Dock 1 21 M4 x 14mm PHMS 2 22 #10-32 x 3/8'' PHMS 2 23 Channel Cover, 16'' L x 2'' W Channel Cover, 16'' L x 1'' W 3 25 Mouse Trap /16'' Hex Wrench /8'' Hex Wrench /32'' Hex Wrench /64'' Hex Wrench 1 2 DU-GEM Rev B 11/7/12 GCX Corp. Page 1 of 8

2 Assembling the Roll Stand Tools required 3/16'' hex wrench (provided) 1/8'' hex wrench (provided) 5/32'' hex wrench (provided) Phillips screwdriver (not provided) 9/64'' hex wrenches (provided) 1. Using 3/16'' hex wrench provided, fasten Counterweights to bottom of Base with six (6) 1/4-20 x 1-1/4'' SHCS. Mounting Holes toward inside of Base Installation Note: Mounting holes in Counterweights must be oriented toward the inside of the Base as shown. Front of Base Base Dual Channel Column Front of Column Front of Base 2. Using 3/16'' hex wrench provided, secure Column to Base with four (4) 1/4-20 x 2-3/4'' SHCS and (4) 1/4'' split lock washers as shown. DU-GEM Rev B 11/7/12 GCX Corp. Page 2 of 8

3 Installing Components and Accessories on the Dual Channel Column Most channel-mounted components are mounted by inserting the Channel-Slide in the top of the Channel, moving the assembly to the desired mounting position and tightening one or more set screws. Numbered callouts indicate the order of component installation on the Dual Channel Column. Installation Note: The base unit must be installed in the Base Unit Mount before any other components are installed in the rear channel (see illustration below right). Insert channel slides in top of channel (front and rear) and move down to mounting position Installation Note: It may be necessary to swivel the Display Mount to access the top of the channel. 4. PDM Mount Insert in front channel. Tighten set screw with 1/8'' hex wrench provided. See page 4 for mounting mini dock or bedside dock. 1. Base Unit Mount Refer to separate Installation Guide. 3. Accessory Bin Press Bin downward onto Cleat until it locks into position. 2. Base Unit Refer to separate Installation Guide. DU-GEM Rev B 11/7/12 GCX Corp. Page 3 of 8

4 5. Cable Management Arm & Handle First, insert Cable Management Arm in rear channel. Tighten two (2) set screws with 1/8'' hex wrench provided. Second, insert Handle in rear channel. Using the 5/32'' hex wrench provided, tighten four (4) socket head screws to secure position in channel. Handle See below for mounting mini dock (included) and bedside dock (not included). Cable Management Arm Fasten mini dock to PDM Bracket with two (2) #10-32 x 3/8'' PHMS. Mini-dock and screws are provided in this kit. Bedside dock (not included) Mini dock Fasten bedside dock to PDM Bracket with two (2) M4 x 14mm PHMS provided. Bedside dock is not included in this kit. DU-GEM Rev B 11/7/12 GCX Corp. Page 4 of 8

5 Mounting the Display on the Roll Stand Installation Note: These instructions apply to 15'' or 19'' display. 1. Fasten Display Mounting Bracket to 100 x 100 mm mounting pattern on rear of display with four (4) M4 x 14 mm FHMS. 2. Fasten Mounting Adapter to 75 x 75 mm mounting pattern on rear of display with four (4) #8-32 x 5/16'' PHMS. DU-GEM Rev B 11/7/12 GCX Corp. Page 5 of 8

6 3. Slide Mounting Adapter into mounting plate. Pull Plunger and continue sliding monitor until Plunger snaps into clearance hole. 4. Tighten all Nylon screws on rear of Mounting Plate. Mounting the Power Supply Bracket Power Supply Bracket 1. Fasten Power Supply Bracket to a corresponding twohole mounting pattern on either side of Display Mounting Bracket with two (2) #10-32 x 5/16'' FHMS. Installation Note: Attachment of Power Supply Bracket is shown on unmounted display for clarity. Multiple mounting positions are available to accommodate your specific application. Cable Clamp #8 Flat Washer (1) #8-32 x 1/4'' PHMS (1) 2. Mount power supply and secure with hook-and-loop straps. Unscrew Cable Clamp, press cable inside Clamp, and reinstall Clamp. See illustration above. DU-GEM Rev B 11/7/12 GCX Corp. Page 6 of 8

7 Cable Management Cable Management Arm Press cables into Cable Retainers as shown Cable Clamps (2) on Display Mounting Bracket Unscrew Cable Clamp, press cable inside clamp, and reinstall on Display Mounting Bracket. There are multiple locations for installing the Cable Clamps. Cables may be routed behind Channel Covers (shown uninstalled) Cables may be routed behind Channel Slides Channel Covers (2 widths included) snap into channels and may be trimmed with scissors or utility knife for custom fit Cables may be routed from one side of Column to the other through the pass-through hole 2'' Channel Cover for front and rear channel (left). 1'' Channel Cover for side channels (right) DU-GEM Rev B 11/7/12 GCX Corp. Page 7 of 8

8 Adjusting Tilt and Tilt Tension 1. For minor adjustments, loosen the Tilt Adjustment Lever, grasp the Display Handles and tilt to the desired angle. Tighten the Tilt Adjustment Lever. 2. To adjust overall tilting tension, equally tighten or loosen the two (2) socket head Tilt Tension Screws with the 9/64'' hex wrench provided. Tilt Adjustment Lever Tilt Tension Screws (2) Adjusting Swivel and Pivot Tension on Cable Management Arm To adjust swivel or pivot tension, loosen or tighten the swivel tension nut (front end) or pivot tension bolts (center and rear of arm) with a 1/2'' socket wrench. Pivot Bolt Swivel Nut Pivot Bolt Routine Maintenance Periodically inspect all mounting hardware. Tighten or adjust as necessary for optimal operation. Cleaning the Mounting Assembly 1. The mounting assembly may be cleaned with most mild, non-abrasive solutions commonly used in the hospital environment (e.g. diluted bleach, ammonia, or alcohol solutions). 2. The surface finish will be permanently damaged by strong chemicals and solvents such as acetone and trichloroethylene. 3. Do not use steel wool or other abrasive material to clean the mounting assembly. 4. Damage caused by the use of unapproved substances or processes will not be covered by warranty. We recommend testing oft any cleaning solution on a small area of the mounting assembly that is not visible to verify compatibility. 5. Never submerge the roll stand or allow liquids to enter the mounting assemblies Wipe any cleaning agents off the mounting assembly immediately using a water-dampened cloth. Dry all mounting assemblies thoroughly after cleaning. CAUTION: GCX makes no claims regarding the efficacy of the listed chemicals or processes as a means for controlling infection. Consult your hospital s infection control officer or epidemiologist. To clean or sterilize mounted instruments or accessory equipment, refer to the specific instructions delivered with those products. DU-GEM Rev B 11/7/12 GCX Corp. Page 8 of 8

Installation Guide GE Healthcare Carescape Dual Display Roll Stand Kit

Installation Guide GE Healthcare Carescape Dual Display Roll Stand Kit Installation Guide GE Healthcare Carescape Dual Display Roll Stand Kit The purpose of this guide is to describe assembly of the Roll Stand. WARNING - EXCESSIVE LEAKAGE CURRENT - DO NOT use multiple socket

More information

Installation Guide Stack Mount Kit for Philips G5 and MP5/20/30/40/50/60/70 Monitor

Installation Guide Stack Mount Kit for Philips G5 and MP5/20/30/40/50/60/70 Monitor Installation Guide Stack Mount Kit for Philips G5 and MP5/20/30/40/50/60/70 Monitor The purpose of this guide is to describe installation of the Stack Mount. Parts Reference The following parts and hardware

More information

Installation Guide. Xprezzon Roll Stand

Installation Guide. Xprezzon Roll Stand 3875 Cypress Drive Petaluma, CA 94954 800.228.2555 707.773.1100 Fax 707.773.1180 www.gcx.com Installation Guide Xprezzon Roll Stand The purpose of this guide is to describe assembly of the Roll Stand and

More information

Installation Guide Philips MP2 IntelliVue M-Series Arm (12'' or 8'') Rail Mount Kit

Installation Guide Philips MP2 IntelliVue M-Series Arm (12'' or 8'') Rail Mount Kit Installation Guide Philips MP2 IntelliVue M-Series Arm (12'' or 8'') Rail Mount Kit The purpose of this guide is to: 1. Describe mounting of MP2 equipment on Mounting Bracket (page 2). 2. Describe mounting

More information

Installation Guide Roll Stand Kit for Philips MP20/30 Monitor

Installation Guide Roll Stand Kit for Philips MP20/30 Monitor Installation Guide Roll Stand Kit for Philips MP20/30 Monitor The purpose of this guide is to: 1. Describe attachment of Post to Base (page 2). 2. Describe attachment of the Utility Basket to the Roll

More information

Installation Guide Roll Stand Kit 2''/5.1cm Diameter Post with Tilt/Swivel Mounting Plate, Handle, Utility Basket and 10lbs/4.

Installation Guide Roll Stand Kit 2''/5.1cm Diameter Post with Tilt/Swivel Mounting Plate, Handle, Utility Basket and 10lbs/4. 3875 Cypress Drive Petaluma, CA 94954 800.228.2555 707.773.1100 Fax 707.773.1180 www.gcx.com Installation Guide Roll Stand Kit 2''/5.1cm Diameter Post with Tilt/Swivel Mounting Plate, Handle, Utility Basket

More information

Installation Guide. Philips IntelliVue MP20/30/40/50/60/70, MX400/450/600/700/800 Low Profile Camlock Mount

Installation Guide. Philips IntelliVue MP20/30/40/50/60/70, MX400/450/600/700/800 Low Profile Camlock Mount Installation Guide Philips IntelliVue MP20/30/40/50/60/70, MX400/450/600/700/800 Low Profile Camlock Mount The purpose of this guide is to: 1. Describe mounting of Philips Table Top Mount on Table Top

More information

Installation Guide LiDCO Hemodynamic Monitor - Roll Stand Kit (US Version)

Installation Guide LiDCO Hemodynamic Monitor - Roll Stand Kit (US Version) Installation Guide LiDCO Hemodynamic Monitor - Roll Stand Kit (US Version) The purpose of this guide is to describe assembly of the roll stand kit and mounting of applicable devices. Table of Contents.0

More information

Installation Guide LiDCO Hemodynamic Monitor - Roll Stand Kit (EURO Version)

Installation Guide LiDCO Hemodynamic Monitor - Roll Stand Kit (EURO Version) Installation Guide LiDCO Hemodynamic Monitor - Roll Stand Kit (EURO Version) The purpose of this guide is to describe assembly of the roll stand kit and mounting of applicable devices. Table of Contents.0

More information

Installation Guide Folding L-Bracket with Display Mounting Extension and Keyboard Tray for M-Series or VHM Arm

Installation Guide Folding L-Bracket with Display Mounting Extension and Keyboard Tray for M-Series or VHM Arm 3875 Cypress Drive Petaluma, CA 94954 800.228.2555 707.773.1100 Fax 707.773.1180 www.gcx.com Installation Guide Folding L-Bracket with Display Mounting Extension and Keyboard Tray for M-Series or VHM Arm

More information

GCX Mounting Assembly Installation Guide. Philips MP90 (M8010A) Mounting Kit for Drager Zeus

GCX Mounting Assembly Installation Guide. Philips MP90 (M8010A) Mounting Kit for Drager Zeus GCX Mounting Assembly Installation Guide Philips MP90 (M8010A) Mounting Kit for Drager Zeus The purpose of this guide is to: 1. Describe attachment of Down Post to Arm. 2. Describe attachment of Arm to

More information

Installation Guide GE Mini Telemetry Receiver Rear Column Mount

Installation Guide GE Mini Telemetry Receiver Rear Column Mount 3875 Cypress Drive Petaluma, CA 94954 800.228.2555 707.773.1100 Fax 707.773.1180 www.gcx.com Installation Guide GE Mini Telemetry Receiver Rear Column Mount Parts Reference The following parts and hardware

More information

Installation Guide Philips MP90 Mounting Kit with 16'' M-Series Arm for Datex Ohmeda Avance Anesthesia Machine

Installation Guide Philips MP90 Mounting Kit with 16'' M-Series Arm for Datex Ohmeda Avance Anesthesia Machine Installation Guide Philips MP90 Mounting Kit with 16'' M-Series Arm for Datex Ohmeda Avance Anesthesia Machine The purpose of this guide is to describe installation of the Mounting Kit on the anesthesia

More information

Installation Guide Philips MP90 Dual Display Mounting Kit for Dräger Apollo Anesthesia Machine

Installation Guide Philips MP90 Dual Display Mounting Kit for Dräger Apollo Anesthesia Machine Installation Guide Philips MP90 Dual Display Mounting Kit for Dräger Apollo Anesthesia Machine The purpose of this guide is to describe installation of the Mounting Kit on the anesthesia machine. Parts

More information

Installation Guide. Philips MP20/30/40/50 IntelliVue VHM Wall Mount Kit

Installation Guide. Philips MP20/30/40/50 IntelliVue VHM Wall Mount Kit Installation Guide Philips MP20/30/40/50 IntelliVue VHM Wall Mount Kit The purpose of this guide is to: 1. Describe attachment of Table Top Mount to Mounting Adapter. 2. Describe attachment of Mounting

More information

Installation Guide VHM Wall Mount Kit for Philips MX600/700/800 and MP60/70 IntelliVue

Installation Guide VHM Wall Mount Kit for Philips MX600/700/800 and MP60/70 IntelliVue Installation Guide VHM Wall Mount Kit for Philips MX600/700/800 and MP60/70 IntelliVue The purpose of this guide is to: 1. Describe attachment of Table Top Mount to Mounting Adapter (page 2). 2. Describe

More information

GCX Mounting Assembly Operation/Installation Manual

GCX Mounting Assembly Operation/Installation Manual GCX Mounting Assembly Operation/Installation Manual Dräger Model Fabius GS with Dräger Vamos, CWS 15 "Recall" and GEMS IT DASH 3000/4000 Patient Monitor Option 1 Option 2 Option 3 Vamos or Dash 3000/4000

More information

Installation Guide VHM Arm Kit for Philips Heartstart MRx and Heartstart XL+

Installation Guide VHM Arm Kit for Philips Heartstart MRx and Heartstart XL+ Installation Guide VHM Arm Kit for Philips Heartstart MRx and Heartstart XL+ The purpose of this guide is to: 1. Describe installation of Arm in channel (page 2). 2. Describe mounting of defibrillator

More information

Installation Manual for Philips Intellivue MP5/20/30 VHM-25 Channel Mount Kit

Installation Manual for Philips Intellivue MP5/20/30 VHM-25 Channel Mount Kit 3875 Cypress Drive Petaluma, CA 94954 800.228.2555 707.773.1100 Fax 707.773.1180 www.gcx.com Installation Manual for Philips Intellivue MP5/20/30 VHM-25 Channel Mount Kit Install Time: 10-15 minutes The

More information

Installation Guide Variable Height Roll Cart for Corometrics/GE 250 Series Fetal Monitor with Dual Displays and Keyboard Mounts

Installation Guide Variable Height Roll Cart for Corometrics/GE 250 Series Fetal Monitor with Dual Displays and Keyboard Mounts 3875 Cypress Drive Petaluma, CA 94954 800.228.2555 707.773.1100 Fax 707.773.1180 www.gcx.com Installation Guide Variable Height Roll Cart for Corometrics/GE 250 Series Fetal Monitor with Dual Displays

More information

Installation Manual for Philips SureSigns VS3/VS4/VM4/VM6/VM8/VSV VHM-25 Countertop Mount

Installation Manual for Philips SureSigns VS3/VS4/VM4/VM6/VM8/VSV VHM-25 Countertop Mount 3875 Cypress Drive Petaluma, CA 94954 800.228.2555 707.773.1100 Fax 707.773.1180 www.gcx.com Installation Manual for Philips SureSigns VS3/VS4/VM4/VM6/VM8/VSV VHM-25 Countertop Mount Install Time: 20-30

More information

Installation Manual for VHM-25 Series Arms Channel Mount

Installation Manual for VHM-25 Series Arms Channel Mount 3875 Cypress Drive Petaluma, CA 94954 800.228.2555 707.773.1100 Fax 707.773.1180 www.gcx.com Installation Manual for VHM25 Series Arms Channel Mount Install Time: 1015 minutes The purpose of this manual

More information

VHM-P (Non-Locking) Variable Height Arm with VESA Mounting Plate for 75 x 75mm or 100 x 100mm applications

VHM-P (Non-Locking) Variable Height Arm with VESA Mounting Plate for 75 x 75mm or 100 x 100mm applications 3875 Cypress Drive Petaluma, CA 94954 800.228.2555 +1.707.773.1100 Fax 707.773.1180 www.gcx.com VHM-P (Non-Locking) Variable Height Arm with VESA Mounting Plate for 75 x 75mm or 100 x 100mm applications

More information

(Refer to qualified personnel)

(Refer to qualified personnel) 3875 Cypress Drive Petaluma, CA 94954 800.228.2555 +1.707.773.1100 Fax 707.773.1180 www.gcx.com Installation Guide VHM-P (Non-Locking) and VHM-PL (Locking) Variable Height Arm (Slide-Above-Arm Configuration)

More information

VHM-P (Non-Locking) and VHM-PL (Locking) Variable Height Arm with Slide-In Mounting Plate

VHM-P (Non-Locking) and VHM-PL (Locking) Variable Height Arm with Slide-In Mounting Plate 3875 Cypress Drive Petaluma, CA 94954 800.228.2555 +1.707.773.1100 Fax 707.773.1180 www.gcx.com VHM-P (Non-Locking) and VHM-PL (Locking) Variable Height Arm with Slide-In Mounting Plate (Refer to qualified

More information

Installation Guide Corometrics/GE 250 Series Fetal Monitor Roll Cart with Laptop and Display Mounts

Installation Guide Corometrics/GE 250 Series Fetal Monitor Roll Cart with Laptop and Display Mounts 3875 Cypress Drive Petaluma, CA 94954 800.228.2555 707.773.1100 Fax 707.773.1180 www.gcx.com Installation Guide Corometrics/GE 250 Series Fetal Monitor Roll Cart with Laptop and Display Mounts Table of

More information

3875 Cypress Drive Petaluma, CA Fax

3875 Cypress Drive Petaluma, CA Fax 3875 Cypress Drive Petaluma, CA 94954 800.228.2555 +1.707.773.1100 Fax 707.773.1180 www.gcx.com VHM-P (Non-Locking) Variable Height Arm with Fixed Angle Front End for Flat Panel / Keyboard Bracket (L Brackets

More information

GE CARESCAPE Monitor B650 on VHM- PL Variable Height Arm Channel Mount with Vertical Position Lock

GE CARESCAPE Monitor B650 on VHM- PL Variable Height Arm Channel Mount with Vertical Position Lock GE CARESCAPE Monitor B650 on VHM- PL Variable Height Arm Channel Mount with Vertical Position Lock PRODUCT DETAILS VHM-PL (Locking) Variable Height Arm with 14" / 35.6 cm Extension and Slide-In Mounting

More information

Installation Guide Philips MP90 VHM Wall Mount Kit

Installation Guide Philips MP90 VHM Wall Mount Kit Installation Guide Philips MP90 VHM Wall Mount Kit The purpose of this guide is to describe the procedures for installing the MP90 VHM Wall Mount Kit. Table of Contents Section 1.0: Mounting the VHM-Series

More information

Installation Guide. Philips MP90 M-Series Wall Mount Kit (12'' Pivot Arm) Section 1.0: Mounting the M-Series Arm Parts Reference...

Installation Guide. Philips MP90 M-Series Wall Mount Kit (12'' Pivot Arm) Section 1.0: Mounting the M-Series Arm Parts Reference... Installation Guide Philips MP90 M-Series Wall Mount Kit (12'' Pivot Arm) The purpose of this guide is to describe installation of the MP90 M-Series Wall Mount Kit. Table of Contents Section 1.0: Mounting

More information

GCX Mounting Assembly Installation Guide Philips MP90 (with AGM) Mounting Kit for Datex Ohmeda Aestiva Anesthesia Machine

GCX Mounting Assembly Installation Guide Philips MP90 (with AGM) Mounting Kit for Datex Ohmeda Aestiva Anesthesia Machine GCX Mounting Assembly Installation Guide Philips MP90 (with AGM) Mounting Kit for Datex Ohmeda Aestiva Anesthesia Machine The purpose of this guide is to: 1. Describe mounting of the 7'' Channel. 2. Describe

More information

Condor Manual. Corporation

Condor Manual. Corporation Condor Manual Corporation PREFACE IMPORTANT, PLEASE READ CAREFULLY Thank you for your purchase with Amico Accessories Inc. This unit is designed for long lasting performance, providing the end user complies

More information

3875 Cypress Drive Petaluma, CA Fax

3875 Cypress Drive Petaluma, CA Fax 3875 Cypress Drive Petaluma, CA 94954 800.228.2555 707.773.1100 Fax 707.773.1180 www.gcx.com GCX Mounting Assembly Installation Guide Datex-Ohmeda Aestiva Display Arm Mounting Kit for Philips IntelliVue

More information

Installation Instructions. ARS (Amico Rail Systems)

Installation Instructions. ARS (Amico Rail Systems) Installation Instructions ARS (Amico Rail Systems) w w w. a m i c o. c o m Preface Important, Please Read Carefully Thank you for your purchase with Amico Accessories Inc. This unit is designed for long

More information

INSTALLATION MANUAL FOR PILOT WORKSTATION

INSTALLATION MANUAL FOR PILOT WORKSTATION INSTALLATION MANUAL FOR PILOT WORKSTATION Weight Capacity: 5-25 lbs. Monitor Weight: 5-20 lbs. 6011180 Rev. B Contents Tools Required / Supplied Part Kits / Warnings/Disclaimer...2 Possible Base Mounting

More information

FOR SIT-STAND WORKSTATION

FOR SIT-STAND WORKSTATION INSTALLATION MANUAL FOR SIT-STAND WORKSTATION Weight Capacity: 6.5-24.5 lbs. 6017180 Rev. B Contents Tools Required / Supplied Part Kits / Warnings/Disclaimers...2 Base Installation Clamp Mount Base Location...3

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS AUTOMOTIVE PRODUCTS, INSTALLATION INSTRUCTIONS SPORTSMAN WINCH MOUNT GRILLE GUARD / HDX WINCH MOUNT GRILLE GUARD / MAX WINCH MOUNTING SYSTEM APPLICATION: 2016 Chevrolet Silverado 1500 PART NUMBER: 40-93875,

More information

INSTALLATION INSTRUCTIONS Horizontal Array Pole Clamp Models: KTA-220/225 and KTA-320/325

INSTALLATION INSTRUCTIONS Horizontal Array Pole Clamp Models: KTA-220/225 and KTA-320/325 INSTALLATION INSTRUCTIONS Horizontal Array Pole Clamp Models: KTA-220/225 and KTA-320/325 The KTA-220/225 and KTA-320/325 pivot arrays allow horizontal (yaw), vertical (pitch), and roll display adjustment.

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS AUTOMOTIVE PRODUCTS, INSTALLATION INSTRUCTIONS SPORTSMAN GRILLE GUARD / HDX GRILLE GUARD APPLICATION: 2016 Chevrolet Silverado 1500 PART NUMBER: 40-3875, 45-3870, 57-3870, 57-3875 ITEM QUANTITY DESCRIPTION

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS AUTOMOTIVE PRODUCTS, INSTALLATION INSTRUCTIONS HDX DROP STEP APPLICATION: 2007-2017 Chevy Silverado / GM Sierra / 1500-2500-3500 Ext. / Double / Crew Cab PART NUMBER: 56-13715, 56-13725 ITEM QUANTITY DESCRIPTION

More information

The Quality Truck Accessory Реор/е PLEASE INSPECT YOUR PRODUCT FOR DAMAGE BEFORE PROCEEDING ТО INSTALLATION.

The Quality Truck Accessory Реор/е PLEASE INSPECT YOUR PRODUCT FOR DAMAGE BEFORE PROCEEDING ТО INSTALLATION. The Quality Truck Accessory Реор/е PLEASE INSPECT YOUR PRODUCT FOR DAMAGE BEFORE PROCEEDING ТО INSTALLATION. (W) INSTALLATION INSTRUCTIONS 04-15 FORD F-150 ECOBOOST PART # 504337/504339 PARTS LIST: Qty

More information

INSTALLATION INSTRUCTIONS Small Flat Panel Extreme Pitch Mechanism Model: FSA-1006

INSTALLATION INSTRUCTIONS Small Flat Panel Extreme Pitch Mechanism Model: FSA-1006 INSTALLATION INSTRUCTIONS Small Flat Panel Extreme Pitch Mechanism Model: FSA-06 The FSA-06 Extreme Pitch Mechanism is an accessory kit for Small Flat Panel Display mounts. Specifications: fixed axis 90

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS AUTOMOTIVE PRODUCTS, INSTALLATION INSTRUCTIONS POLICE PUSH BUMPER ELITE XD APPLICATION: 2016 Chevrolet Silverado 1500 PART NUMBER: 36-53875 ITEM QUANTITY DESCRIPTION TOOLS NEEDED 1 1 PUSH BUMPER ASSEMBLY

More information

PARTS LIST: PROCEDURE:

PARTS LIST: PROCEDURE: PARTS LIST: EVO3 LIGHT BAR Qty Description Qty Description 1 EVO3 Light Bar 2 10mm U-Bolt (for use on "closed frames" only) 1 Light Mount Crossbar Bracket 4 10mm x 26mm OD x 3mm Flat Washers 2 Light Tab

More information

Assembly Instructions

Assembly Instructions Assembly Instructions Part Number Description Model Approx. Assembly Time 99994-049 Cab Enclosure MULE SX 3-4 Hours WARNING Improper installation of this accessory could result in an accident causing serious

More information

INSTALLATION INSTRUCTIONS WHEEL-TO- WHEEL

INSTALLATION INSTRUCTIONS WHEEL-TO- WHEEL INSTALLATION INSTRUCTIONS WHEEL-TO- WHEEL AUTOMOTIVE PRODUCTS, INC. APPLICATION: SILVERADO/ SIERRA 2014-20 00 CREW CAB (5.5 FT BED) 2014-20 00/2500/3500 CREW CAB (6.5FT BED) & DUAL REAR WHEEL (8FT BED)

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS AUTOMOTIVE PRODUCTS, INSTALLATION INSTRUCTIONS Thrasher Board APPLICATION: 007-017 Chevy Silverado / GM Sierra / 1500-500-3500 Extended / Double / Crew Cab PART NUMBER: 8-8105, 8-81035 ITEM QUANTITY DESCRIPTION

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS AUTOMOTIVE PRODUCTS, INSTALLATION INSTRUCTIONS HDX DROP STEP WTW APPLICATION: 2007-2017 Chevy Silverado / GM Sierra / 1500-2500-3500 Ext. / Double / Crew Cab - 6.5 Ft Bed PART NUMBER: 56-534575, 56-534595,

More information

CAUTION. INSTALLATION INSTRUCTIONS Part Number Hidden Winch Kit with special XD 9000 Short Drum Winch For Ford F-150 Truck

CAUTION. INSTALLATION INSTRUCTIONS Part Number Hidden Winch Kit with special XD 9000 Short Drum Winch For Ford F-150 Truck INSTALLATION INSTRUCTIONS Part Number 69110 Hidden Winch Kit with special XD 9000 Short Drum Winch For Ford F-150 Truck As you read these instructions, you will see NOTES, CAUTIONS and WARNINGS. Each message

More information

INSTALLATION INSTRUCTIONS RATTLER STEEL RUNNING BOARDS FORD TRANSIT VAN (FULL SIZE)

INSTALLATION INSTRUCTIONS RATTLER STEEL RUNNING BOARDS FORD TRANSIT VAN (FULL SIZE) INSTALLATION INSTRUCTIONS PARTS LIST: 1 32-inch Steel Running Board 1 8-1.25mm x 35mm Hex Bolt 1 96-inch Steel Running Board 13 8-1.25mm x 25mm Hex Bolt 5 Passenger Side/Driver Side Mounting Brackets 20

More information

GENUINE PARTS INSTALLATION INSTRUCTIONS

GENUINE PARTS INSTALLATION INSTRUCTIONS GENUINE PARTS INSTALLATION INSTRUCTIONS DESCRIPTION: APPLICATION: PART NUMBER: Hood Bug Deflector Pathfinder T99D5 9PJ0A KIT CONTENTS: Item Qty. A 2 Inner Clip A B 2 Outer Clip B C 2 Wing Clip C D 1 Hood

More information

Carousel Unit User Manual Replacing the Check Stand Motor

Carousel Unit User Manual Replacing the Check Stand Motor Carousel Unit User Manual Replacing the Check Stand Motor 02/01/2017 1 Table of Contents Tools:... 3 Turn Off Power to the Unit:... 4 Remove Power Switch... 5 Remove Electric Eyes:... 6 Remove POS (Point-Of-Sale)

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS 3.5 CONTOUR BULL BAR AUTOMOTIVE PRODUCTS, APPLICATION: 0-06 Chevrolet Silverado 500 PART NUMBER: 3-3000, 3-3005, 3-3005T, 3-3090, 3-3095, 3-3095T ITEM QUANTITY DESCRIPTION TOOLS

More information

INSTALLATION INSTRUCTIONS Product Revision Form Rev. C INST-439 CRADLE, DELL E-6510/6500

INSTALLATION INSTRUCTIONS Product Revision Form Rev. C INST-439 CRADLE, DELL E-6510/6500 7160-0202 Cradle is designed to be used with a Dell E-Port or E-Port Plus Port Replicator. The cradle is assembled for used with Dell E-6510. By removing 2 Side Spacers the Cradle can also be used with

More information

Parts List Continues on Next Page

Parts List Continues on Next Page Assembly Instructions and Owner s Manual Description: Quantum Hardcoated Polycarbonate UTV Windshield, Wash n Wipe Full Size Model: Part Number: N30202 Installation Time: 60 min Polaris RZR 800, Round

More information

DVD REAR SEAT VIDEO SYSTEM

DVD REAR SEAT VIDEO SYSTEM Read entire instructions thoroughly before starting. TOOLS REQUIRED: DVD REAR SEAT VIDEO SYSTEM MINIVANS WITH ROOF RAILS INSTALLATION INSTRUCTIONS Non-metal trim stick Phillips screwdriver T15, T20, T25

More information

INSTALLATION INSTRUCTIONS C-DMM FORD INTERCEPTOR UTILITY SWING-OUT DASH MONITOR MOUNT

INSTALLATION INSTRUCTIONS C-DMM FORD INTERCEPTOR UTILITY SWING-OUT DASH MONITOR MOUNT INSTALLATION INSTRUCTIONS C-DMM-123 2013-2018 FORD INTERCEPTOR UTILITY SWING-OUT DASH MONITOR MOUNT The Dash Monitor Mount bracket system requires two or three main parts that are sold separately. See

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS AUTOMOTIVE PRODUCTS, INSTALLATION INSTRUCTIONS HDX XTREME BOARD APPLICATION: 2007-2017 Chevrolet Silverado / GMC Sierra 1500/2500/3500 Extended, Crew, Double Cab (Excludes Classic) PART NUMBER: 56-23715,

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS AUTOMOTIVE PRODUCTS, INSTALLATION INSTRUCTIONS HDX DROP STEP APPLICATION: 2007-2016 Chevy Silverado / GM Sierra / 1500-2500-3500 PART NUMBER: 56-13715, 56-13725 CONTENT ITEM QUANTITY DESCRIPTION TOOLS

More information

MINI COOPER HAVING INSTALLATION QUESTIONS? CALL TECHNICAL SUPPORT AT DESIGNED FOR USE WITH BALL MOUNT # D-19 / 45519

MINI COOPER HAVING INSTALLATION QUESTIONS? CALL TECHNICAL SUPPORT AT DESIGNED FOR USE WITH BALL MOUNT # D-19 / 45519 10/8/2012 PAGE 1 of 6 ITEM 1 QTY 8 Parts List PART NUMBER DESCRIPTION 3/8" CONICAL TOOTHED WASHER TOOLS REQUIRED RATCHET TORQUE WRENCH 12" EXTENSION 12mm SOCKET 8mm SOCKET OFFSET SCREWDRIVER FLAT BLADE

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS RUNNING BOARD MOUNT KIT APPLICATION: 007-03 Chevrolet Silverado / GMC Sierra 00 Crew Cab 008-04 Chevrolet Silverado / GMC Sierra 00/300HD Crew Cab PART NUMBER: 7-7 ITEM QUANTITY

More information

INFINITY MULTA SERIES

INFINITY MULTA SERIES ASSEMBLY ASSEMBLY INSTRUCTIONS INSTRUCTIONS ASSEMBLY INSTRUCTIONS INFINITY MULTA SERIES Workstations, WORKSTATIONS, desks, DESKS, and AND tables TABLES with WITH powered POWERED ADJUSTMENT adjustment PARTS

More information

IV STANDS. Assembly, Usage and Maintenance INSTRUCTION MANUAL

IV STANDS. Assembly, Usage and Maintenance INSTRUCTION MANUAL INSTRUCTION MANUAL IV STANDS Assembly, Usage and Maintenance Read and understand all of the instructions and safety information in this manual before operating this product. MAN-045 REV A 2018 MAC Medical,

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS AUTOMOTIVE PRODUCTS, INSTALLATION INSTRUCTIONS R7 Step Board APPLICATION: 007-017 Chevy Silverado / GM Sierra / 1500-500-3500 Ext. / Double / Crew Cab PART NUMBER: 8-7100, 8-7105, 8-71030, 8-71035 ITEM

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS Trans4mer Grille Guard/Winch Mount For 2007 Toyota Tundra Kit 76380 (Black) and 76381 (Stainless) Your safety, and the safety of others, is very important. To help you make informed

More information

AND MAINTENANCE MANUAL

AND MAINTENANCE MANUAL IMPORTANT File in your maintenance records COMPANION (SINGLE TOP TABLE) COMPANION II (SPLIT TOP TABLE) Companion & Companion II Overbed Tables OPERATIONS AND MAINTENANCE MANUAL For Parts or Technical Assistance

More information

Plasma Dual Swing-Out (PDS Series) Wall Mount

Plasma Dual Swing-Out (PDS Series) Wall Mount INSTALLATION INSTRUCTIONS Plasma Dual Swing-Out ( Series) Wall Mount The wall mount is a rugged, versatile, and installer-friendly solution to unique display mounting requirements. In addition to providing

More information

INSTALLATION INSTRUCTIONS FORD F-150 2WD & 4WD RETAINS FACTORY TOW HOOKS PART #P3063

INSTALLATION INSTRUCTIONS FORD F-150 2WD & 4WD RETAINS FACTORY TOW HOOKS PART #P3063 INSTALLATION INSTRUCTIONS FORD F-150 2WD & 4WD RETAINS FACTORY TOW HOOKS PART #P3063 PARTS LIST: 1 Grille Guard 2 10-1.5mm Nylon Lock Nuts 1 Driver/Left Frame Mounting Bracket 4 12mm Plastic Washers 1

More information

Motion System Components Diagram. Note: #2 Mirror Cover and X-Axis Motor Cover have been removed for visibility. Maintenance.

Motion System Components Diagram. Note: #2 Mirror Cover and X-Axis Motor Cover have been removed for visibility. Maintenance. Professional Laser System PLS3.75, PLS4.75, PLS6.75 and PLS6.150D Keeping the laser system clean will ensure the highest quality engraving. A clean laser system is the best performing laser system. The

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS R5 STEP BOARD APPLICATION: 2007-2017 Chevrolet Silverado / GMC Sierra Extended / Double / Crew Cab AUTOMOTIVE PRODUCTS, PART NUMBER: 28-51020, 28-51025, 28-51030, 28-51035 ITEM

More information

INSTALLATION INSTRUCTIONS WINCH MOUNTING KIT Part Number: Application: Honda Rancher TRX420

INSTALLATION INSTRUCTIONS WINCH MOUNTING KIT Part Number: Application: Honda Rancher TRX420 INSTALLATION INSTRUCTIONS WINCH MOUNTING KIT Part Number: 75660 Application: Honda Rancher TRX420 Your safety, and the safety of others, is very important. To help you make informed decisions about safety,

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS AUTOMOTIVE PRODUCTS, INSTALLATION INSTRUCTIONS STYLIZED RUNNING BOARD APPLICATION: 2011-2016 Ford Explorer PART NUMBER: 28-21170, 28-21175 ITEM QUANTITY DESCRIPTION TOOLS NEEDED 1 2 RUNNING BOARDS 13MM

More information

PFPDARM1 Product Illustration

PFPDARM1 Product Illustration PFPDARM1 Product Illustration page 1 of 17 PFPDARM1Components & Fasteners 1x 1x 4x 1 each 4x 3/32" (2.38mm) 3/16" (4.76mm) 1/8" (3.17mm) 8x 4x TOOLS REQUIRED Phillips Screwdriver 1/2" Wrench 1/2" Socket

More information

Checker Unload Checkstand Installation Instructions

Checker Unload Checkstand Installation Instructions Front-End Checkouts Commercial Refrigeration Equipment Display Merchandisers Store Fixtures Checker Unload Checkstand Installation Instructions Attention Store Manager: Please find enclosed in this packet

More information

MOUNT BRACKET PARTS and HARDWARE: Installation parts with * come loose in hardware kit bag. Other parts are preassembled

MOUNT BRACKET PARTS and HARDWARE: Installation parts with * come loose in hardware kit bag. Other parts are preassembled INSTALL INSTRUCTIONS C-DMM-2006 Dash Monitor Mount 2017-2019 F-250, 350, 450 Pickup, F-450 and 550 Cab Chassis, 2015-2019 Ford F-150 and 2018-2019 Expedition Notes: 1. The C-DMM-2000 series Dash Monitor

More information

8G Brake Assembly Alignment

8G Brake Assembly Alignment 8G Brake Assembly Alignment 8G (9-5250) This document explains how to do the 8G (9-5250) brake assembly alignment in order to eliminate noise in the drive system coming from the mis-aligned brake plates.

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS AUTOMOTIVE PRODUCTS, INSTALLATION INSTRUCTIONS SPORTSMAN & HDX GRILLE GUARD APPLICATION: 2015 & UP Ford F-150 PART NUMBER: 40-3835, 45-3830, 57-3830, 57-3835 ITEM QUANTITY DESCRIPTION TOOLS NEEDED 1 1

More information

FireHawk M7XT Ultra Elite XT Facepiece

FireHawk M7XT Ultra Elite XT Facepiece FireHawk M7XT Ultra Elite XT Facepiece MAINTENANCE AND REPAIR MSA 411 (L) Rev. 0 MSA 2014 Prnt. Spec. 10000005389(I) Mat. 10147457 Doc. 10147457 Replacement Kits Push-to-Connect Slide-to-Connect FireHawk

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS OUTLAW REAR BUMPER APPLICATION: 2016-2018 Chevrolet Silverado 1500 PART NUMBER: 58-81005 CONTENT ITEM QUANTITY DESCRIPTION TOOLS NEEDED 1 1 REAR BUMPER 18MM WRENCH 2 4 SENSOR

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS R5 STEP BOARD APPLICATION: 2007-2017 Chevrolet Silverado / GMC Sierra Extended / Double / Crew Cab AUTOMOTIVE PRODUCTS, PART NUMBER: 28-51020, 28-51025, 28-51030, 28-51035 ITEM

More information

rm-port rm-port rm-port rm-port

rm-port rm-port rm-port rm-port rm-port PIVOT ARMS The new pivot arm generation rm-port is characterised by an exceptionally rapid and user-friendly installation and improved ease of use for users. rm-port is equipped with an innovative

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS AUTOMOTIVE PRODUCTS, INC. INSTALLATION INSTRUCTIONS ULTIMATE BULL BAR APPLICATION: 2017 Ford F-250/350 PART NUMBER: 32-3900, 32-3905, 32-3900L, 32-3905L ITEM QUANTITY DESCRIPTION TOOLS NEEDED 1 1 ULTIMATE

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS Part # 751-FP2500 IMPORTANT INFORMATION This Jagg oil cooler must be installed following these instructions. Read the easy-to-follow instructions fully prior to starting the installation

More information

INSTRUCTIONS. Disassembly. Shifter Cam Assembly. Shifter Forks

INSTRUCTIONS. Disassembly. Shifter Cam Assembly. Shifter Forks INSTRUCTIONS Disassembly To protect against accidental start-up of vehicle, always disconnect the negative battery cable before working on the motorcycle. Failure to disconnect the battery cable could

More information

06-08 Passenger/Right Top Mounting Bracket Driver/Left Top. Mounting Bracket. Driver/Left Frame Mounting Bracket

06-08 Passenger/Right Top Mounting Bracket Driver/Left Top. Mounting Bracket. Driver/Left Frame Mounting Bracket PARTS LIST: 1 Grille Guard 4 12mm x 44mm OD x 3mm Flat Washers 1 Driver/Left Frame Mounting Bracket 12 12mm x 32mm OD x 3mm Flat Washers 1 Passenger/Right Frame Mounting Bracket 4 12mm Lock Washers 1 Driver/Left

More information

INSTALLATION INSTRUCTIONS GRILLE GUARD SILVERADO 1500 PART #

INSTALLATION INSTRUCTIONS GRILLE GUARD SILVERADO 1500 PART # INSTALLATION INSTRUCTIONS PART # 3-5863 4-0863 PARTS LIST: Qty Description Qty Description 1 Grille Guard Assembly 6 12-1.75mm Hex Nuts 2 Frame Brackets 4 10-1.50mm x 30mm Hex Bolts 1 Driver/Left Mounting

More information

OWNERS MANUAL. ULTRA Single-Station Strength G7-S42 Triceps Press

OWNERS MANUAL. ULTRA Single-Station Strength G7-S42 Triceps Press OWNERS MANUAL ULTRA Single-Station Strength G7-S42 Triceps Press Table Of Contents Safety, General Care & Maintenence... 3 Getting Started (Product Specifications)... 5 Assembly Information... 6 Parts

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS WJ2 FULL-WIDTH FRONT BUMPER APPLICATION: 2018 Jeep Wrangler JL PART NUMBER: 59-80105, 59-80115, 59-80125 CONTENT ITEM QUANTITY DESCRIPTION TOOLS NEEDED 1 1 FRONT BUMPER ASSEMBLY

More information

GROSS LOAD CAPACITY WHEN USED AS A WEIGHT CARRYING HITCH: 2,000 LBS. TRAILER WEIGHT & 200 LBS. TONGUE WEIGHT.

GROSS LOAD CAPACITY WHEN USED AS A WEIGHT CARRYING HITCH: 2,000 LBS. TRAILER WEIGHT & 200 LBS. TONGUE WEIGHT. PAGE 1 0F 6 GROSS LOAD CAPACITY WHEN USED AS A WEIGHT CARRYING HITCH: 2,000 LBS. TRAILER WEIGHT & 200 LBS. TONGUE WEIGHT. WARNING: ALL NON-TRAILER LOADS APPLIED TO THIS PRODUCT MUST BE SUPPORTED BY 18050

More information

AIM LED LIGHT (wall mount)

AIM LED LIGHT (wall mount) AIM LED LIGHT (wall mount) Installation Manual AIM LED LIGHT (wall mount) INTRODUCTION Lights in the AIM Series are designed to give the professional health care market superior performance, reliability

More information

PART NUMBER: E361SAJ400

PART NUMBER: E361SAJ400 A KIT CONTENTS: Do not use this product with hitch extenders. PIVOT BOLT (1X) PIVOT WASHER (2X) PIVOT NUT (1X) HITCH BOLT (1X) LOCK WASHER (1X) WASHER(1X) SAFETY CLIP (1X) STRAP (6X) BASE (1X) LOCKING

More information

It is strongly recommended that this kit be installed by an authorized Polaris dealer.

It is strongly recommended that this kit be installed by an authorized Polaris dealer. EPS STEERING KIT P/N 2879970 APPLICATION RANGER 570 AND RANGER ETX IMPORTANT It is strongly recommended that this kit be installed by an authorized Polaris dealer. BEFORE YOU BEGIN Read these instructions

More information

Universal Pitch Adjustable Wall Mount For Flat Panel Display UPM-2401

Universal Pitch Adjustable Wall Mount For Flat Panel Display UPM-2401 INSTALLATION INSTRUCTIONS Universal Pitch Adjustable Wall Mount For Flat Panel Display UPM-2401 Your new Chief Universal Pitch-Adjustable Wall Mount (UPM-2401) is a quick disconnect mounting system with

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS AUTOMOTIVE PRODUCTS, INSTALLATION INSTRUCTIONS SPORTSMAN WINCH MOUNT GRILLE GUARD / MAX WINCH TRAY HDX WINCH MOUNT GRILLE GUARD APPLICATION: 2017 Ford F250/350 Super Duty PART NUMBER: 40-93905, 45-93900,

More information

GENUINE PARTS INSTALLATION INSTRUCTIONS

GENUINE PARTS INSTALLATION INSTRUCTIONS GENUINE PARTS INSTALLATION INSTRUCTIONS DESCRIPTION: APPLICATION: PART NUMBER: KIT CONTENTS: Item Qty. A B C D E F G H 1 Bedliner Under Rail Bedliner Titan Crew Cab/King Cab/Single Cab 999T1 W3700, 999T1

More information

(2) 10mm Quick Release Bolts with Pivot Washers (4) 10mm Flat Washers (2) 10mm Nylon Lock Nuts. (4) 10mm Plastic Washers

(2) 10mm Quick Release Bolts with Pivot Washers (4) 10mm Flat Washers (2) 10mm Nylon Lock Nuts. (4) 10mm Plastic Washers PARTS LIST: EXTREME GRILLE GUARD 1 Extreme Heavy Duty Grille Guard 2 10mm Cam Lever Quick Release Bolts with Special Pivot Washer 1 Driver/left Frame Mounting Bracket 4 10mm x 24mm OD x 2.2mm Flat Washers

More information

HAVING INSTALLATION QUESTIONS? CALL TECHNICAL SUPPORT AT

HAVING INSTALLATION QUESTIONS? CALL TECHNICAL SUPPORT AT 9/23/2009 1 of 6 ITEM 1 QTY 8 Parts List PART NUMBER DESCRIPTION 3/8" CONICAL TOOTHED WASHER TOOLS REQUIRED #2 PHILLIPS SCREWDRIVER #2 STUBBY SCREWDRIVER 8mm SOCKET 13mm SOCKET RATCHET 12" EXTENSION TORQUE

More information

RANGER 900 POWER STEERING KIT

RANGER 900 POWER STEERING KIT RANGER 900 POWER STEERING KIT P/N 2880083 APPLICATION MY14 AND NEWER RANGER XP 900 MODELS IMPORTANT It is strongly recommended that this kit be installed by an authorized Polaris dealer. NOTE Use of this

More information

Installation Instructions: Over-The-Patient Units (& Cuspidors) BDS-2500 BDS-2505 BDS-2510 BDS-2515 BDS-2520

Installation Instructions: Over-The-Patient Units (& Cuspidors) BDS-2500 BDS-2505 BDS-2510 BDS-2515 BDS-2520 Installation Instructions: Over-The-Patient Units (& Cuspidors) BDS-2500 BDS-2505 BDS-2510 BDS-2515 BDS-2520 X-Calibur BDS Delivery Systems Installation Instructions for BDS-2500, 2505, 2510, 2515, 2520

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS R5 MODULAR WHEEL TO WHEEL NERF STEP BARS APPLICATION: 2007-2019 Chevy Silverado / GMC Sierra 2500-3500 Crew Cab (8ft. Bed) Excl. Dually PART NUMBER: 28-534580, 28-534585 ITEM

More information