ST JOHN HE BA IST PARISH
|
|
- Julie O’Connor’
- 5 years ago
- Views:
Transcription
1 se AP s Yr cous T Natalie Robottom Parish President ST JOHN HE BA IST PARISH office of the Parish President October Baton Rouge Winwater Works Scott Frazier 8940 Buzbee Dr Baton Rouge La RE Bid Item WATER SEWER FITTINGS Bid Date SEPTEMBER Dear Sir I am pleased to advise that your bid for the following sections of the WATER SEWER FITTINGS to be supplied to St John the Baptist Parish according to our bid specifications was approved by the Parish Council on October You were the low price bidder for the following sections We are awarding these bids to the lowest bidder and are aware that in some cases or equal items were offered in the bid If these or equal items do not perform satisfactorily St John the Baptist Parish reserves the right to accept or reject any and all bids which the Council feels serves their best interest A copy of your bid that specifies individual items printing is attached Pricing below is in effect through December with the option for 1 year renewal Section Section Section Section Section Section Section Section Purchase orders will be issued for each order and the purchase order number should be contained on your invoice 1801 W Airline Hwy LaPlace Louisiana FAX www sjbparish com
2 Thank you for your interest in doing business with St John the Baptist Parish If you have any questions regarding the bid please contact Ms Brenda Labat CPM Director of Purchasing Procurement at Sincerely 1 Natalie Robottom Parish President NR bl
3 INSERTS FOR CTS WATER TUBING Tubing Inserts or liners are made of stainless steel and are designed to be used on CTS Polyethylene PE tubing per ASTM D2737 SDR9 Mueller or equal A34 Insert B1 Insert C1 h Insert D 2 Insert Brand Stoc 8 14 Delivery Time 5oGIL a 3 DcLA1 S I D r 25 as 00 5o Total Section 2 8 W w
4 Straight Meter Coupling Straight meter coupling MIP x meter swivel nut Tailpiece is ribbed outside and cored inside The casting is made of ASTM brass Inlet has a swivel nut and outlet is FIP Mueller or equal A 34 Brass Meter Coupling 37 4 B C 1 Brass Meter Coupling 1 12 Brass Meter Coupling S so D 2 Brass Meter Coupling ZS Total Section Brand Stock No I M4 J tro Delivery Time S IvGe
5 Brass Expansion Connection The casting is made of brass it has two rubber yoke end gaskets for sealing against inlet and outlet fittings Ford or equal A 34 Brass Expansion Connection I I S B 1 Brass Expansion Connection s Brand Stock fvo ilygg boota Delivery Time IJ01 10C ARD Total Section 23 r25
6 65 Air Release Vaive The air release valve shall have a34 NPT inlet and a 12 NPT outlet and a 12 NPT accessory connection with a removable plug for future mounting of a test gauge or test cock The needle shall be brass positively guided into the seat orifice for tight shutoff The seat shall be brass with a BunaN insert and a minimum 18 orifice for 150 psi working pressure and 300 psi shell test The brass seat shall be slotted and be removable and replaceable without dismantling the main valve The air release valve must have a stainless steel float designed to withstand a pressure of 1000 psi static AP A 34 Air Release Valve v Brand Stock No ega k b SO N Total Section Delivery Time 2 ta165ln Alto os
7 MJ and Flanged Fittings through 48 shall be manufactured from Ductile Iron in accordance with and meet all applicable terms and provisions of standards ANSIAWWA C153 A21 ANSIAWWA C111 A21 current revisions Ductile Iron Mechanical Joint Fittings 3 through 24 shall be rated for 350 PSI working pressure 30 through 48 shall be rated for 250 PSI working pressure All coated fittings meet requirements of NSF61 Flanged fittings shall be faced and drilled in accordance with ANSI Class 125 B16 All Ductile iron flange fittings shall be rated for water pressure of 250 PSI Flange ductile iron fittings in mm and smaller sizes may be rated for 350 P51 with use of special gaskets Fittings are cement lined and seal coated in accordance with ANSIAWWA C104 A21 also available prime coated bare or epoxy coated All coated fittings meet requirements of NSF61 Interiors shall be lined and seal coated in A 4 MJ x FLG Adapter 3 o B 6 M1 x FLG Adapter 43 C 8 MJ x FLG Adapter 000 D 6 MJ Cap c2 E 8 MJ Cap F 6 MJ 22 Elbow 40 G H 4 MJ 45 Elbow 6 MJ 45 Elbow I 8 MJ 45 Elbow 1Cs 3 cx J 4 MJ 80 Elbow 344 K 6 c fw w MJ 80 Elbow 5 L 8 MJ 80 Elbow c M 12 MJ x FLG 90 Elbow c2ao N 6 x 6 FLG 90 Elbow q1 S
8 0 4 MJ Retainer Gland 1 6 P 6 MJ Retainer Gland MJ Retainer Gland R 10 MJ Retainer Gland r S 12 MJ Retainer Gland CO T 6 Split Swivel Gland U 4 MJ Plug a0 V 6 MJ Plug WJPlug rr X 10 MJ Plug v2o Y 12 MJ Plug 70 Z 6 x 2 MJ Tap Plug 44 AA 8 x 6 MJ Reducer BB 4 MJ x Plain cutin Sleeve ILK CC 4 x 12 MJ Sleeve DD 6 x 6 MJ Sleeve 3qt EE 6 x 12 MJ Sleeve 40 W FF 8 x 12 MJ Sleeve tjp GG 10 x 12 MJ Sleeve q HH 12 x 12 MJ Sleeve I 11 6 MJ Tee 78 JJ 6 x 4 MJ Tee 70t52 Q KK 8 x 6 MJ Tee r5 Q LL 4 x 12 FLG X FLG Spool Piece t1 S MM 2 MJ Gasket r 22 NN 3 MJ Gasket 0 OD 00 4 MJ Gasket PP 6 MJ Gasket 3 cx G U
9 1 QQ 8 MJ Gasket t RR 10 MJ Gasket 5G0 SS 12 MJ Gasket 60 TT 14 MJ Gasket o P2 UU 6 x 13 Anchor Coupling lj 7 W 6 x 18 Anchor Coupling 839 WW 6 x 24 Anchor Coupling Cn XX 6 x 36 Anchor Coupling j c0 2 YY 6x48AntherCoupling 4 Blind Flange 93gi r AAA 6 Blind Flange LP BBB 8 Blind Flange L9 g cr CCC 10 Blind Flange DDD 12 Blind Flange I P Brand Stock No14057 PI ke1 OI 3 E041Aa Total Section 32 3 Jbq Delivery Time t ogt T C Dce
10 I B Brass Fittings Brass Fittings shall have American Standard tapered pipe threads NPT They shall comply with the following standards Dimension A59617 MSSSP106 Threads ANSIASME B16 15 ASME B A ANSI ASME B1 201 Material ASTM B6293 C83600 Cu Sn40 60 Pb Zn Brass 45 Elbow 34 Brass 45 Elbow C 12 Brass Hose Bibb Faucet D 34 Brass Hose Bibb Faucet fg ac E Brass Reducer 34 x 12 S Sv 3 w F 12 Brass Tee gay G H I J K 1 Brass Swing Check Valve 114 Brass Swing Check 112 Brass Swing Check Valve 2 Brass Swing Check Valve 1 2 Brass Gate Gae Valve I 34 Brass Gate Valve N 1 Brass Gate Valve 1 14 Brass Gate 14 Valve Valve ga to c0 O 1 12 Brass Gate Valve S 1 P Q R 2 Brass Gate Valve 12 Brass Ball Valve 34 Brass Ball Valve S Polished Brass Water Sample Valve Total Section 34 qs co W ii 3t 61 fe0 N or VA i A e Brand Stock No F1 r i Delivery Time 0 et C
11 Wafer Check Valve Check valves shall be of the short facetoface type with external spring to ensure tight shutoff The pressure rating shall be 200 psi Valve bodies shall be of ASTM A126 Class B cast iron Disc and disc arm shall be of ASTM A743 Grade CF8M stainless steel The valve shaft shall be manufactured of ASTM A276 Grade 316 stainless steel and supported by two 2 SAE 660 bronze bearings Shaft sealing shall be accomplished by multiple rings of braided PTFE Teflon rings Packing shall be utilizedon each side of the valve The design of the valve shall be such that spring arm assembly can be field changed from right to left The closure spring shall be manufactured of ASTM A228 spring steel The spring arm shall be constructed of carbon steel ASTM A36 and designed to provide disc position indication The spring P g arm shall be P capable of overriding the spring action for use as an override lever The valve seat shall be of specified 0ring material and retained in a dovetail groove in the valve body Milliken valve or equal A B 4 Wafer Check Valve 6 Wafer Check Valve Brand Stock No 64 Delivery Time S y i GO can Total Section 46 3
12 SEWER MANHOLE ASSEMBLY Manhole material specification cover gray iron ASTM A48 CL35B frame gray iron ASTM A48 CL35B estimated weight cover 115 lbs frame 156 lbs unit 271 lbs Manhole assembly shall be V1403 w V1501 Lid A B Manhole Casting w Cover Manhole Cover TopLid q 5 30 C 1 12 Manhole Riser Ring D 2 Manhole Riser Ring t 0 E F 3 Manhole Riser Ring 4 Manhole Riser Ring r 75 UV G 6 Manhole Riser Ring co Brand Stock No Srota Total Section 47 Delivery Time S 7 day S
CTS WATER SERVICE TUBING - BLACK
CTS WATER SERVICE TUBING - BLACK Section 1 Cts Water Service Tubing shall be PE 3408 Resin listed in PPI TR4, MSF Standard 14 and NSF Standard 61, AWWA C901, ASTM D 2737, Cell classification per ASTM D
More informationPIPE OUTSIDE DIAMETER GUIDE
June 7, 2018-1 PIPE OUTSIDE DIAMETER GUIDE PIPE OUTSIDE DIAMETER GUIDE - SMALL DIAMETER PIPE SIZES NOMINAL PIPE SIZES 1 /2" 3 /4" 1" 1 1 /4" 1 1 /2" 2" 2 1 /2" THIS O.D. GUIDE IS FOR YOUR CONVENIENCE &
More informationSWING CHECK VALVES SERIES 52-SC SERIES 600
SWING CHECK VALVES SERIES 52-SC SERIES 600 FEATURES/BENEFITS/SPECIFICATIONS AMERICAN Flow Control Series 52-SC Swing Check Valves incorporate design features to help increase service life for water and
More informationAWWA SWING CHECK VALVES. Engineering Creative Solutions for Fluid Systems Since 1901
AWWA SWING CHECK VALVES Engineering Creative Solutions for Fluid Systems Since 1901 TABLE OF CONTENTS AWWA SWING CHECK VALVE Series 8001 Lever & Weight or Spring...1 Series 9001 Lever & Weight or Spring...2
More informationTABLE OF CONTENTS. Pipe Diameter Chart (Reference Only)..50 Extensions 38,40,42,44
TABLE OF CONTENTS Item Page Item Page ANSI/AWWA Compact & Full Body Pipe Fittings: Product Submittals and Installation: Mechanical & Flange Joint C153. 3-9 20U Protective Fusion Bonded Epoxy....5,5 Mechanical
More informationUS SERIES. Universal Sewer Valves. Universal Sewer Valves. Valve Function. Features Include
Valve Function Exhausts air as a pipeline fills, and allows air in as pipeline drains Allows accumulating air to escape while line is in operation Features Include Standard and short body series available
More informationMATERIAL SPECIFICATIONS AND BID PROPOSAL SHEET
CATEGORY 1: STEEL COUPLINGS 0 ¾" Steel Couplings (Smith-Blair #411-0501-003) 20 1" Steel Couplings (Smith-Blair #411-013201-003) 20 1¼" Steel Couplings (Smith-Blair #411-016601-003) 20 2" Steel Couplings
More informationTOTAL PIPING SOLUTIONS, INC. TRIPLE-TAP
TOTAL PIPING SOLUTIONS, INC. TRIPLE-TAP Extended Range Stainless Steel Push Plug Line Stop Tapping Sleeve Technical Specifications Controlled Document: ENGTS-05/120417 December 2017 TRIPLE TAP Extended
More informationHP250II AND HP250 BUTTERFLY VALVES Engineering Creative Solutions for Fluid Systems Since 1901
H250II AND H250 BUTTERFLY VALVES Engineering Creative Solutions for Fluid Systems Since 1901 TABLE OF CONTENTS RATT H250II Scope of Line... 1 Design and Construction Details... 1 ipe Mating Chart... 1
More informationMILLCENTRIC FULL/100% POR T ECCENTRIC PLUG VALVE
ISO 9001 CERTIFIED MILLCENTRIC FULL/100% POR T ECCENTRIC PLUG VALVE Suggested Specifications The Milliken criteria of quality, reliability, safety and value are embodied in the Millcentric Eccentric valve,
More informationUNION-TITE DUCTILE IRON C153 COMPACT FITTINGS
Sizes 4"-12" UL Listed for Fire Main Equipment SAMPLE SPECIFICATIONS (Current ANSI/AWWA revisions apply) 4" through 24" Push-On joint ductile iron fittings shall be produced in accordance with all applicable
More informationSection 8 AMERICAN. Flanged Pipe
Section 8 AMERICAN Flanged Pipe The principal standards covering Flanged Pipe are ANSI/AWWA C115/A21.15 and ANSI/AWWA C110/A21.10. These and other standards are referenced throughout this Section either
More informationSuggested Specifications
ISO 9001 Certified Suggested Specifications The Milliken criteria of quality, reliability, safety and value are embodied in the Millcentric Eccentric valve, setting higher standards for dependable performance
More informationModel 5-025, 5-050, &
Model 5-025, 5-050, 5-075 & 5-150 7 Model 5-025, 5-050, 5-075 & 5-150 8 Eductor Block Exploded View Model 5-025, 5-050, 5-075 & 5-150 9 Figure 1 Item Part Name Model Model Model Model 5-025 5-050 5-075
More informationWater, Sewer & Drain Fittings
Why Compact? Compact Joint are manufactured from a high strength, impact resistant ductile iron that offers a great margin of safety against service failures and provides vastly increased resistance to
More informationKVC VALVES AND PEX FITTINGS
KVC VALVES AND PEX FITTINGS 2011 KVC VALVES & PEX FITTINGS CATALOGUE 2 P a g e Table of contents 1. Cast Steel Valves..4 FIG. 272-CS-15 ( Gate ).....5 FIG. 272-CS-300 ( Gate )......6 FIG. 272-CS-600 (
More informationApproved Branded Traceable Fire Protection & Waterworks Valves
Approved Branded Traceable Fire Protection & Waterworks Valves (800) 766-0076 www.smithcooper.com Los Angeles, CA Atlanta, GA Vancouver, WA Chicago, IL AWWA C515 Compliant CONSIDER Your Options Tamper
More informationThe Universal Sewer Air Release Valve is designed to permit
Universal Sewer Valves Universal Sewer Valves Valve Function Exhausts air as a pipeline fills, and allows air in as pipeline drains Allows accumulating air to escape while line is in operation Features
More informationApproved. Size L H. 3" (76mm) 9-1/2" (241mm) 5-51/64" (147mm) 46. 4" (102mm) 11-1/2" (292mm) 6-45/64" (170mm) 81
pproved. Model: SD-NRV200CV Flanged Ends The Flanged End Check Valves are made of Iron Body, Bolted Bonnet and Horizontal Swing, painted with standard color. Epoxy coated inside and outside to WW C550
More informationSECTION COMMON WORK RESULTS FOR FIRE SUPPRESSION. A. Pipe, fittings, valves, and connections for sprinkler systems.
SECTION 210500 - COMMON WORK RESULTS FOR FIRE SUPPRESSION PART 1 GENERAL 1.1 SECTION INCLUDES A. Pipe, fittings, valves, and connections for sprinkler systems. 1.2 RELATED REQUIREMENTS A. Section 099000
More informationHarlingen Water Works System Approved Products List For Subdivisions. January 11, 2005
Harlingen Water Works System Approved Products List For Subdivisions January 11, 2005 Revised March 24, 2016 Harlingen Water Works System Approved Products List for Subdivisions Table of Contents: 1. Valves
More informationThe PL Series Pressure Air Release Valves. Sizes 1 thru 6 Available Compound Lever System Adjustable Buna-N Rubber Plunger. Crispin.
The PL Series Sizes 1 thru 6 Available Compound Lever System Adjustable Buna-N Rubber Plunger Crispin Since 1905 PL SERIES Functio n Allows air and/or gas to be released from a pressurized liquid system
More informationSECTION VALVES PART 1 -GENERAL
SECTION 1571 0 VALVES PART 3- EXECUTION General Shut-off Valves Balancing Valves Drain Valves RELATED WORK Section 15430- Plumbing Specialties Section 15450- Plumbing Equipment PART 1 -GENERAL SCOPE This
More information516509_tabs 11/16/10 4:55 AM Page 1 FIRE HYDRANTS
Date Printed: November 2010 FIRE HYDRANTS or Tyton (6"),6, or 8" A EDDY FIRE HYDRANTS PARTS LIST WORKING PRESSURE: 150 PSI Note: Discontinued For Reference Only 350 PSI Working Pressure
More informationUtilities Catalog. PC-U2008, February, 2008
Utilities Catalog PC-U2008, February, 2008 Tyler Utilities 11910 CR. 492 Tyler, Texas 75706 (800) 527-8478 Union Foundry Company Box 309 Anniston, Alabama 3602 (800) 226-7601 TABLE OF CONTENTS Item Page
More informationKENNEDY VALVE KS-RW RESILIENT WEDGE VALVES
KENNEDY VALVE KS-RW RESILIENT WEDGE VALVES KENNEDY VALVE AWWA C515 Resilient Wedge Gate Valves Meet or Exceed the Requirements of AWWA Standard C515 UL-262/FM-1120/1130 ULC-Underwriters of Canada 2 1/2
More informationConcentric butterfly valves
Lug Between flanges PN10/16 1135 Lever Disc GGG40 nickel plated / Seat EPDM.../10: flanges PN10.../16: flanges PN16 DN 40 50 65 80 100 125 150 200/10 200/16 250/10 250/16 300/10 300/16 16 16 16 16 16 16
More informationUNIVERSAL PRODUCT LINE: STEEL EXTERNALS JACKETED PUMPS TABLE OF CONTENTS SERIES DESCRIPTION RELATED PRODUCTS OPERATING RANGE
SERIES 4223, 4323 (API 682 Seal) Section 304 Page 304. TABLE OF CONTENTS Features & Benefits...2 Revolvable Pump Casings...2 Materials of Construction...2 Cutaway View & Pump Features...3 Key...4 Specifications...4
More informationCast-Iron Valves G101 DI BUTTERFLY VALVE LEVER... 2 G401 CI GLOBE VALVE CL G403 CI GLOBE VALVE PN G103 DI BUTTERFLY VALVE GEAR...
Cast-Iron Valves PAGE G101 DI BUTTERFLY VALVE LEVER.... 2 PAGE G401 CI GLOBE VALVE CL125.... 9 G103 DI BUTTERFLY VALVE GEAR.... 3 G403 CI GLOBE VALVE PN16.... 10 G201 CI Y STRAINER CL125.... 4 G501 CI
More informationCrispin. The UL Series Universal Air Release Valves. Compound Lever System NPT Screwed or ANSI Class Flanges Available.
The UL Series Universal Air Release s Compound Lever System NPT Screwed or ANSI Class Flanges Available Crispin Since 105 sales@crispinvalve.com Universal Air Release s Universal Air Release UL SERIES
More informationvisit us online at
PRICE SHEET (PL-1014-VLV Replaces PL-0513-VLV) TABLE OF CONTENTS VALVES & HYDRANTS Page(s) Product Line Price Sheet 1 AWWA C515 Gate Valves NRS Series 2010 & 1010 PL-1014 Multiplier 2 AWWA C515 Gate Valves
More informationPROJECT TITLE PROJECT NO: CONTRACT TITLE GRANT NO: UNIVERSITY OF CALIFORNIA, DAVIS CITY, CALIFORNIA
The following standard specification is intended to be edited according to the specifics of the project. Brackets [ ] and areas shaded in gray [e.g. format] indicate requirements that are optional depending
More informationTYLER UNION. Quality Waterworks Products. PC-2017, March, REGISTERED FIRMISO 9001:2015. Tyler Union
TYLER UNION Quality Waterworks Products WATERWORKS CATALOG PC-2017, March, 2017 www.tylerunion.com 10014257 U L REGISTERED FIRMISO 9001:2015 CERTIFIED Tyler Union 11910 CR 492 TYLER, TEXAS 75706 (800)
More informationLATEST ARRIVALS CATALOGUE STOCK
LATEST ARRIVALS CATALOGUE STOCK PIPES VALVES FLANGES & FITTINGS IN CARBON STEEL STAINLESS STEEL LATEST ARRIVALS!!!!!! VALVE PRODUCTS CAST IRON WAFER TYPE BUTTERFLY VALVE, PINLESS SHAFT, DUCTILE NICKEL
More informationDARTMOUTH COLLEGE DESIGN January 3, 2012 & CONSTRUCTION GUIDELINES
SECTION 15100 VALVES PART 1 DESIGN DIRECTIVE 1.1 SUMMARY A. This Section includes general duty valves common to most mechanical piping systems, special duty valves are specified in individual piping system
More informationAccording to AWWA-standard
According to -standard Water Fire fighting - UL/FM 304 Gate valves - Cast iron 320 Gate valves OS&Y 306 Service connection valves 322 Post indicators 306 Combi valves 307 Gate valves - 310 Gate valves
More informationAIR/VACUUM VALVE AND OPTIONAL ANTI-SLAM DEVICE SPECIFICATION
AIR/VACUUM AND OPTIONAL ANTI-SLAM DEVICE SPECIFICATION Scope. This specification is intended to cover the design, manufacture, and testing of / in. (3 mm) through 0 in. (00 mm) Air/Vacuum Valves suitable
More informationApproved. Vendor List
APPENDIX A Approved Vendor List Product Manufacturer Valves and Accessories Air Release Valves ARV Enclosures Gate Valves Gate Valves Tapping Valves Insert Valve ARI ARI D 040 2" only ARI D 040 2" only
More informationDesign and Construction Standards SECTION PLUMBING PIPING
SECTION 15420 PLUMBING PIPING PART 1 GENERAL 1.1 SCOPE A. Work consists of all plumbing work indicated on drawings and specified herein. Included are requirements for fees/permits for installation and
More informationTUF-SKIN VALVES. Universal sales 1~1~2O15. Catalog ~ Price List. UNIVERSAL SALES Booth Street Junction City, OR
Universal sales TUF-SKIN VALVES Catalog ~ Price List 1~1~2O15 MEMBER MANA Manufacturers Agents National Association UNIVERSAL SALES 92311 Booth Street Junction City, OR 97448 www.universalsales.biz Ph:
More informationWellhead Valves. DHV Industries,Inc. DHV Valve Company Inc.
DHV Industries,Inc. 3451 Pegasus Drive, Bakersfield. CA 93308 U.S.A. Call TollFree: (887) DHV-USA1 Phone: (661) 392-8948 Fax: (661) 392-8947 E-mail: sales@dhvindustries.com Website: www.dhvindustries.com
More informationThe SC Series Surge Check Valves Sizes 3 thru 24 Available Cast Iron Construction Limits the Effects of System Surge on Air Release Valves.
The Series Sizes 3 thru 24 Available Cast Iron Construction Limits the Effects of System Surge on Air Release Valves Crispin Since 1905 Crispin Multiplex Manufacturing Co. 600 Fowler Avenue Berwick, PA
More informationCAST STEEL FLANGED GATE, GLOBE, & CHECK VALVES.
CAST STEEL FLANGED GATE, GLOBE, & CHECK VALVES www.fnw.com Index Options & Accessories... 2 Standards... 2 Figure Number Matrix... 3 Pressure/Temperature Ratings... 3 Hydrostatic Test Pressures... 3 Carbon
More informationWILKINSBURG-PENN JOINT WATER AUTHORITY DUCTILE IRON PIPE AND ACCESSORIES BID TABULATIONS CONTRACT NO
WILKINSBURG-PENN JOINT AUTHORITY UNIT # 1- PIPE AND MJ FITTINGS & TAYLOR 1A 6 RON PIPE, CLASS 52 no bid no bid 11.98 12.61 14.23 no bid no bid 13.40 14.93 1B 8 RON PIPE, CLASS 52 16.94 17.83 20.12 17.83
More informationAir Commander Part No , with air Part No , without air
EASYSTREET Air Commander Part No. 27325, with air Part No. 27332, without air www.airliftcompany.com Please read these instructions completely before proceeding with installation. The oil level in the
More informationSECTION GENERAL-DUTY VALVES FOR PLUMBING PIPING
SECTION 22 05 23 PART 1 - GENERAL 1.1 SUMMARY A. Work Included: 1. Valves, General 2. Gate Valves 3. Balancing Valves 4. Ball Valves 5. Swing Check Valves 6. Backflow Prevention Assemblies 7. Pressure
More informationFabricated Bevel Gear Operator Bi-Directional Metal Seat 150 PSI Bi-Directional Resilient Seat 150 PSI
Knife Gate Valves Uni-Directional (Metal Seated) Manual Handwheel Style KGV...2 Carbon Steel Technical Data 150 PSI 2 24...3 304 Stainless Steel Technical Data 150 PSI 2 24...3 316 Stainless Steel Technical
More informationDIVISION 23 HEATING, VENTILATING, AND AIR CONDITIONING (HVAC) SECTION HVAC VALVES
DIVISION 23 HEATING, VENTILATING, AND AIR CONDITIONING (HVAC) SECTION 23 05 23 PART 1 GENERAL 1.01 DESCRIPTION A. Provide valves for the following systems: 1. Heating Hot Water 2. Chilled Water 3. Condenser
More informationWe Are the Worldwide Provider for All Your Valve and Fitting Needs
Product Catalog We Are the Worldwide Provider for All Your Valve and Fitting Needs C&C strives to earn your business by offering an extensive line of high quality products with a proven track record for
More informationFord Service Saddles and Tapping Sleeves
DQS Inc. Section AA 09/2017 THE FORD METER BOX COMPANY, INC. CERTIFIED TO ISO 9001:2015 10004466 Ford Service Saddles and Tapping Sleeves Contents Recommended Product Application *Steel *C900/909*** Cast
More informationVALVES, FIRE HYDRANTS, AND APPURTENANCES
VALVES, FIRE HYDRANTS, AND APPURTENANCES PART 1 - GENERAL 1.01 SECTION INCLUDES A. Butterfly Valves B. Gate Valves C. Tapping Valve Assemblies D. Fire Hydrant Assemblies E. Flushing Devices (Blowoffs)
More informationAMERICAN FLOW CONTROL 3-16 SERIES 2100 RESILIENT SEATED CHECK VALVE
AMERICAN FLOW CONTROL 3-16 SERIES 2100 RESILIENT SEATED CHECK VALVE CONSTRUCTION STAINLESS STEEL PIPE PLUG Allows installation of pressure gauge. STAINLESS STEEL FASTENERS Helps provide corrosion resistance.
More informationCCNE Check Valves Engineering Creative Solutions for Fluid Systems Since 1901
CCNE Check Valves Engineering Creative Solutions for Fluid Systems Since 1901 A Tradition of Excellence With the development of the first rubber seated butterfly valve more than 70 years ago, the Henry
More informationSAN ANTONIO WATER SYSTEM SPECIFICATIONS FOR RUBBER-SEATED BUTTERFLY VALVES 3 INCHES THROUGH 72 INCHES ANSI/AWWA C504 Class 150/250 December 2012
SAN ANTONIO WATER SYSTEM SPECIFICATIONS FOR RUBBER-SEATED BUTTERFLY VALVES 3 INCHES THROUGH 72 INCHES ANSI/AWWA C504 Class December 2012 1. SCOPE This product specification covers class rubber-seated butterfly
More informationM&H AWWA C508 STANDARD SWING CHECK VALVES
GENERAL M&H AWWA C508 STANDARD SWING CHECK VALVES Style 59-02 plain / 159-Lever & Weight / 259-02 Lever & Spring Sizes 2 Through 36 Water / Sewage Service M&H Swing Check valves are widely specified by
More informationWe Are the Worldwide Provider for All Your Valve and Fitting Needs
Product Catalog We Are the Worldwide Provider for All Your Valve and Fitting Needs C&C Industries strives to earn your business by offering an extensive line of high quality products with a proven track
More informationAWWA Swing Check Valves
AWWA Swing Check Valves Engineering Creative Solutions for Fluid Systems Since 1901 A Tradition of Excellence With the development of the first rubber seated butterfly valve more than 70 years ago, the
More informationGENERAL CATALOGUE Catalogue 2013
GENERAL CATALOGUE Catalogue 2013 Company Profile GALA - Extends Business on a Global Perspective. GALA company offers a wide range of products and systems in the field of valves, piping, and seismic isolation
More informationTEL: Version: KW2
WWW.KLAMBON.COM 1 Page Klambon Water is a wholly owned subsidiary of West Rand Engineering (WRE), we are suppliers of valves, fittings and related products to all industries and our service extends to
More informationND = Double Door, SEAT NBR ES = Center Guided Silent Check / EPDM NS = Center Guided Silent Check / NBR. Butterfly Valves, Seat in body.
MAS-WDI-1118 MAS W-Series Water Works / Fire Protection Valves ORDERING CODES Series XX = Valve Type X = CWP XX = Design Type XX = End Connection W = AWWA/UL/FM, 10 = Gate Valve A = 300 CWP RS = Rising
More informationElectronic Control Valves
MODEL 131 Series (Full Internal Port) 631 Series (Reduced Internal Port) Electronic Control Valves Model 131-01/631-01 Simple Proven Design Quality Solenoid Pilot Controls Ideal For SCADA Systems Multi-Function
More informationPrecision is Central.
Precision is Central. As experts in pipe joining solutions, we know precision is vital to every fitting and how they are fused. We offer the most complete range of conventional fusion fittings, injection
More informationINFACT CORPORATION WATERWORKS PRODUCTS FLEX ADAPTOR SPECIFICATION S TOLL FREE:
INFACT CORPORATION WATERWORKS PRODUCTS SPECIFICATION S TOLL FREE: 888-773-9130 email: info@infactcorp.com www.infactcorp.com ENGINEERING DATA / PRODUCT CHECKLIST EASY-TO-INSTALL SPACE-SAVING RESTRAINT
More informationBERMAD Fire Protection
Differential-Pressure Sustaining Valve Description The Model FP-436 Differential-Pressure Sustaining Valve is a hydraulically-operated, diaphragm-actuated, control valve that sustains minimum pre-set,
More informationSECTION GENERAL-DUTY VALVES FOR PLUMBING PIPING
SECTION 220523 - GENERAL-DUTY VALVES FOR PLUMBING PIPING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division
More informationKNIFE GATE VALVE Product Ref. : KG02W/KG02L
General Description Model KG02 is a bidirectional knife gate valve suitable for most industrial application cases. With one piece body design, it combines robust and economy giving best cost effective
More informationStainless Steel / Iron Valve ISO 9001
CAST IRON GATE VALVE CLASS 125 NON-RISING STEM. (N.R.S.) STEM: SS410 (BRASS / SS304) MODEL: CI-12N (CI-12N/CI-2NS) CAST IRON GATE VALVE CLASS 125 OUTSIDE SCREW AND YOKE. STEM: SS410 (BRASS / SS304) MODEL:
More informationDirect Mount Packages
800.783.7836 Direct Mount Packages BEV9 Actuated package Size range: 1/ - Pressure rated for 1000 WOG 316 Stainless steel construction Live loaded stem seal design Full Port Threaded Ends (F) EZ99 Actuated
More informationSUBMITTAL PACKAGE FIRE PROTECTION VALVES
SUBMITTAL PACKAGE FIRE PROTECTION VALVES Butterfly Valves Ductile Iron Grooved...pg 2-5 Grooved Check Valves...pg 6-8 OS&Y Valves...pg 9-12 ARGCO.com 800-854-1015 Updated 2/27/2017 ARGCO GROOVED BUTTERFLY
More informationJUST PIPING, JUST FITTING. A Comprehensive Integrated Solution For Piping Systems
JUST PIPING, JUST FITTING A Comprehensive Integrated Solution For Piping Systems SF 01 DUCTILE IRON PIPE FITTINGS FD1011 FD1021 FD1022 FD1031 FD1102 FD1103 FD1111 FD1121 Double Flanged Piece Flanged spigot
More informationStarFlex series 5000 Double-Ball Flexible Expansion Joint for the Protection of Water Wastewater, and Industrial Pipelines
Joint Restraint Products StarFlex series 5000 Double-Ball Flexible Expansion Joint for the Protection of Water Wastewater, and Industrial Pipelines INFORMATION StarFlex Flexible Expansion Joints can deflect
More informationBALL VALVE DATA SHEET NO. 01 (150#)
BALL VALVE DATA SHEET NO. 01 (150#) VALVE CODE BF101 VALVE TYPE Double Flanged Full Port BODY MATERIAL CARBON STEEL TO ASTM A 216 Gr. WCB CLASS 150# DESIGN STANDARD ISO 17292 SIZE 1/2" TO 1 1/2" 2" TO
More informationUNIVERSAL PRODUCT LINE: DUCTILE IRON JACKETED PUMPS TABLE OF CONTENTS SERIES DESCRIPTION RELATED PRODUCTS OPERATING RANGE
Page 1602.1 TABLE OF CONTENTS Features & Benefits...2 Porting & Sealing...2 Jacketing...2 Revolvable Pump Casings...2 Cutaway View & Pump Features...3 Model Number Key...4 Standard Materials of Construction...4
More informationAPPROVED MATERIALS LIST SERVICE MATERIALS July 2017 **REVISED 12/6/17**
APPROVED MATERIALS LIST SERVICE MATERIALS July 2017 **REVISED 12/6/17** SIZE DESCRIPTION MANUFACTURER & MODEL NUMBER CORPORATION STOPS 1" MIP x GRIP Comp ball corp stop Ford: FB 1100-4Q McDonald: 74704-BQ
More informationelbow ball check valves Patents no.: US 8,146,618 B2, US 8,082,949 B2 in-line ball check valves Patent no.: US 8,146,618 B2 PRODUCT CATALOG
elbow ball check valves Patents no.: US 8,1,18 B, US 8,08,99 B in-line ball check valves Patent no.: US 8,1,18 B PRODUCT CATAOG Version 09.017 SZUSTER system is a brand of innovative products which, due
More informationHole-cutting. cutting a hole. After the hole has been cut all rough edges must be removed and the area within 5/8 (16mm) of the hole
Mechanical Tees Hole-cutting Shurjoint mechanical tees provide a fast and easy mid-point branch outlet, eliminating the need for welding or the use of multiple fittings. The Model M21 features a female
More informationSECTION GENERAL-DUTY VALVES FOR HVAC. A. Section includes valves for building services piping.
SECTION 23 05 23 GENERAL-DUTY VALVES FOR HVAC PART 1 - GENERAL 1.1 SUMMARY A. Section includes valves for building services piping. 1.2 REFERENCES A. AGA Z21.22 (American Gas Association) - Relief Valves
More informationValves for building. Y-strainers... page 204 PVC valves Ball valves... page 204 Butterfly valve... page 204 Ball check valve...
Valves for building Ball valves PN25/20... page 194 PN30/20... page 195 PN40/30 - Lead-free brass... page 196 Valve for gas... page 197 Stem extension valves... page 197 3 way valves... page 197 Mini valves...
More informationV A L V E S. rice List of. Controlling fluids is our expertise TERMS & CONDITIONS : An ISO:9001 Co. PRICE LIST NO. : JMW / 3 0 W.E.
V A L V E S Controlling fluids is our expertise TERMS & CONDITIONS : This cancels our all previous issues. All prices are Ex. works, Jalandhar. Excise duty will be charged extra as applicable (presently
More informationDRAWING INDEX 1 07/01/2013. Company Project Project Number Location Revision Date
DRAWING INDEX Company Project Project Number Location Revision Date LEGACY OIL & GAS INC. PIERSON PILINE TO EOG 12069 VARIOUS LSD ISSUED FOR APPROVAL January 4, 2013 Drawing No. Client No. Description
More informationSV418 Series Bronze Safety Valves ASME Section VIII - NB Certified for Air, Gas, Steam, and Liquid
Safety SV418 Series Bronze Safety Description Spirax Sarco's SV418 safety and relief valve is designed for accuracy and reliability. Engineered for heavy-duty industrial usage. Multiple purpose safety
More informationHenderson Engineers, Inc. SECTION GENERAL DUTY VALVES FOR PLUMBING PIPING PART 1 - GENERAL REQUIREMENTS
SECTION 220523 - GENERAL DUTY VALVES FOR PLUMBING PIPING PART 1 - GENERAL REQUIREMENTS 1.1 SUMMARY A. This Section includes general duty valves common to most plumbing piping systems. 1. Special purpose
More informationPlease read these instructions completely before proceeding with installation. Read all maintenance guidelines on page 7 before operating the vehicle.
MN-643 (02511) ECR 5461 Kit No. 39205 Please read these instructions completely before proceeding with installation Item P/N Description Quantity A 26391 Driver-Side Beam Assembly 1 B 26414 Passenger-Side
More informationTY-FLO 3 Piece Ball Valves
TY-FLO 3 Piece Ball Valves 3 PIECE BALL VALVES TY-FLO 3 Piece Ball Valves D 1 ASME B16.34 Compliant FEATURES 3-Piece, 8-Bolt construction provides superior high pressure performance and ASME B16.34 compliance
More informationPUBLIC UTILITIES DEPARTMENT CITY OF SAN DIEGO APPROVED MATERIALS LIST FOR WATER STAN MEDINA DEPUTY DIRECTOR WATER OPERATIONS. u f! ASSISTANT DIRECTOR
PUBLIC UTILITIES DEPARTMENT CITY OF SAN DIEGO FOR WATER STAN MEDINA DEPUTY DIRECTOR WATER OPERATIONS DEPUTY DIRECTOR ENGINEERING & PROGRAM MANAGEMENT u f! u~~~ 7 STAN GRIFFITH ASSISTANT DIRECTOR DISTRIBUTION
More informationALTITUDE CONTROL VALVES FOR ONE WAY FLOW
PROJECT NAME LOCATION ALTITUDE CONTROL VALVES FOR ONE WAY FLOW INTRODUCTION This specification covers the design, manufacture, and testing of 2 in. (50 mm) through 36 in. (900 mm) Control Valves PART 1
More informationCOMBINATION PRESSURE REDUCING AND SOLENOID SHUTOFF CONTROL VALVES 2.01 COMBINATION RESSURE REDUCING AND SOLENOID SHUTOFF CONTROL VALVE
PROJECT NAME LOCATION COMBINATION PRESSURE REDUCING AND SOLENOID SHUTOFF CONTROL VALVES INTRODUCTION This specification covers the design, manufacture, and testing of 1 in. (25 mm) through 36 in. (900
More information145 HP, FRONT WHEEL ASSIST TRACTOR 3/17/15 Page 1. Mountrail County Road and Bridge SPECIFICATIONS FOR
Page 1 Mountrail County Road and Bridge S FOR Bidder's Instructions: Indicate compliance to the specifications on the YES/NO line by each specification. Indicate any deviations from the specifications
More informationIndustrial Bronze and Iron Price List
Industrial Bronze and Iron Price List TABLE OF CONTENTS IND-0217 Effective: February 1, 2017 Revised: 12/07/17 Suggested list prices are subject to change without notification. Visit our Website for the
More informationValves for building. Y-strainers... page 272 PVC valves Ball valves... page 272 Butterfly valves... page 272 Ball check valves...
Valves for building Ball valves PN25/20... page 262 PN30/20...pages 262 to 263 PN40/30 - Lead-free brass... page 264 Valve for gas... page 265 Stem extension valves... page 265 3 way valves... page 265
More informationRUBBER SLEEVE KNIFE GATE VALVE
RUBBER SLEEVE KNIFE GATE VALVE The model knife gate is a wafer valve designed for a wide range of industrial applications. The double-seated design provides bi-directional shut off. The design of the valve
More informationField Installation of the Joystick Conversion Kit (DUAL CONTROL){1408, 5057, 5059, 5264, 5705}
Media Search - REHS1805 - Field Installation of the 233-5720 Joystick Conversion K Page 1 of 54 Special Instruction Field Installation of the 233-5720 Joystick Conversion Kit (DUAL CONTROL){1408, 5057,
More information1.1 PURPOSE A. This section is intended to define the general installation and minimum product requirements for hydronic and steam valves.
Date Description of Change Pages / Sections Modified ID 6/15/16 Entire document - mgl44 PART 1 - INTRODUCTION 1.1 PURPOSE A. This section is intended to define the general installation and minimum product
More informationTY-FLO 3 Piece Ball Valves
OTHER PRODUCTS Other Products TYLOK International carries a comprehensive range of high-quality fluid components to compliment the TY-FLO 3 Piece Ball Valve product line. Featured below are several popular
More informationList of Materials and Approved Manufacturers
List of Materials and Approved Manufacturers Revised April 2017 300 West Plant Street, Winter Garden, FL 34787 (407) 656-4111 www.wintergarden-fl.gov Water Distribution Please indicate your selection by
More informationSection G 01/2018 THE FORD METER BOX COMPANY, INC. CERTIFIED TO ISO 9001: Ford Curb Stops and Meter Valves
DQS Inc. Section G 01/2018 THE FORD METER BOX COMPANY, INC. CERTIFIED TO ISO 9001:2015 10002505 Ford Curb Stops and Meter Valves Contents Page Information Product ing System...3 Features of Ball Valves...4....5
More informationIndustrial Bronze and Iron Price List
Industrial Bronze and Iron Price List TABLE OF CONTENTS IND-0718 Effective: July 2, 2018 Revised: 08/06/2018 Suggested list prices are subject to change without notification. Visit our Website for the
More informationIndustrial Bronze and Iron Price List
Industrial Bronze and Iron Price List IND-0318 Effective: March 1, 2018 Revised: 08/06/2018 Suggested list prices are subject to change without notification. Visit our Website for the most up-to-date product
More informationFord Ranger Rear Kit Part No
EASYSTREET Ford Ranger Rear Kit Part No. 75621 www.airliftcompany.com MN-487 (03202) ECN3773 Please read these instructions completely before proceeding with installation Item P/N Description Qty. A 10177
More informationIndustrial Bronze and Iron Price List
Industrial Bronze and Iron Price List IND-0718 Effective: July 2, 2018 Revised: 09/24/2018 Suggested list prices are subject to change without notification. Visit our Website for the most up-to-date product
More information