WATER COOLERS & FOUNTAINS

Transcription

1 COMPLETE UNITS MURDOCK MCBF2 SENSOR-OPERATED BOTTLE FILLER Sensor-operated bottle filler that complies with ADA Forward Reach requirements. Part # A171.8 SERIES BARRIER-FREE, WALL-MOUNTED WATER COOLER A self-contained, vandal-resistant drinking fountain, activated from a front push-button using less than 5 pounds of force. Delivers a 0.3 GPM flow, has a flexible guard with an integrally designed non-squirt feature, and operates on a water pressure range of psig. Constructed of 304 stainless steel, and has an integral drain. Meets ADA, ADA Standing Person, and ADA Child requirements when mounted appropriately. Part # Description Granite Stainless steel A172.8UBL SERIES BARRIER-FREE, UNIVERSAL BI-LEVEL WALL-MOUNTED WATER COOLER Bi-level, self-contained, pressurized water cooler Front push-button activation Delivers a 0.3 GPM flow Flexible guard with integrally designed nonsquirt feature Operates on a water pressure range of psig. 304 stainless steel, with integral drain. Meets ADA, ADA standing person, and ADA child requirements when mounted appropriately. Part # Description Granite Stainless steel Bi-level with bottle filler, granite Bi-level with bottle filler, stainless steel ELKAY BARRIER-FREE, UNIVERSAL BI-LEVEL, WALL-MOUNTED WATER COOLER WITH BOTTLE FILLER Self-contained, vandalresistant drinking fountain, Front push-button activation Delivers a 0.3 GPM flow Flexible guard with integrally designed non-squirt feature Operates on a water pressure range of psig. 304 stainless steel, with integral drain. Meets ADA, ADA Standing Person, and ADA Child requirements when mounted appropriately. Part # Description Granite with bottle filler Stainless steel with bottle filler MODEL EZS8L WATER COOLER The Elkay EZ models are their most popular water cooler series. These models offer easy-touch pushbar or sensor-activated controls and come standard with a Flexi-Guard Safety Bubbler. The extra-deep basin minimizes splashing and features an integral drain. Part # MODEL EZH2O BOTTLE-FILLER STATION WITH FILTERED SINGLE LZ COOLER An electric water cooler with bottle-filling station. Refrigerated models deliver 8 GPH of 50 F drinking water at 90 F ambient and 80 F inlet water. Non-refrigerated models deliver non-chilled drinking water. Lower unit has pushbar activation. Bottle-filling unit includes an electronic sensor for touchless activation with an automatic 20-second shut-off timer. LED light illuminates the water-dispensing area, brightening as water is being dispensed. Bottle filler provides a GPM flow rate with laminar flow to minimize splashing. Part # EZH20 BOTTLE-FILLING STATION FILTERED RETRO-MODEL FOR EZ/LZ COOLERS, MODEL LZWSRK Retrofit bottle-filling station for 115V/60Hz EZ style pushbar-activated models. Bottle-filling unit includes an electronic sensor for touchless activation with auto 20-second shut-off timer. Bottle filler provides GPM flow rate with laminar flow to minimize splashing. Also includes the WaterSentry Plus 3000-gallon capacity filter, with visual monitor to indicate when replacement is necessary. Meets ADA guidelines. Part #

2 COMPLETE UNITS HTVZ SERIES SINGLE WALL-MOUNTED BARRIER-FREE COOLER Self-contained, electric refrigerated, wall-mounted nonfiltered water cooler, easily accessible to physically challenged individuals. Delivers 8 GPH. One-piece, chrome-plated, two-stream Double Bubbler TM with non-removable anti-squirt feature and integral hood. Self-closing, light touch front and side pushbar actuation, with raised letters for the visually impaired. Rated for indoor use. Part # WM SERIES WALL-MOUNTED COOLER Moss grey enamel finish. Delivers 8 GPH. Part # Same as but delivers 14 GPH. Part # HAC8PV BARRIER-FREE COOLER Platinum vinyl finish. Features extra-wide push-bar for water control. Delivers 6.7 GPH. Part # HALSEY TAYLOR SW SERIES COMPACT WALL-MOUNTED COOLER Platinum vinyl finish. Delivers 4 GPH. Part # Same as but delivers 8 GPH Part # SCWT SERIES UNIVERSAL FLOOR- STANDING COOLER Moss gray enamel finish. Delivers 14 GPH. Part # GPH Floor-mounted deluxe cooler Part # WM SERIES WATER-COOLED CONDENSER WALL-MOUNTED COOLER Platinum vinyl finish. Delivers 16 GPH. Part # S SERIES ECONOMY FREE-STANDING COOLER Platinum vinyl finish. Delivers 5 GPH. Part # GPH Part # MODEL HTHB-HAC-RF FILTERED HAC RETROFIT HYDROBOOST BOTTLE FILLER Bottle-filling station designed to retrofit existing HAC pushbar-activated models. Applicable on 115V models only. Rated for indoor use. Supplied with basin to ensure proper fit and allow for easy installation. Ideal for use in sports and fitness centers, educational and healthcare facilities, airports, office buildings and many other commercial buildings. Includes a bottle-filling station that retrofits onto existing 115V pushbar-activated HAC models. Bottle filler includes an electronic sensor for notouch activation with automatic 20-second shutoff timer. Part # WC8AFS-Q BARRIER-FREE COOLER Platinum vinyl finish. Self-closing light-touch push-bars with raised letters for the visually impaired. Delivers 8 GPH. Part # OASIS BARRIER-FREE VERSACOOLER MODEL P8AC Delivers 8.0 GPH. ADA-compliant. Stainless-steel top, flexible bubbler guard. Heavy-duty galvanized steel frame with a high-efficiency cooling tank and coil. Three push-pad activation. Sandstone finish. Part # BARRIER-FREE VERSACOOLER II BI-LEVEL WATER COOLER Part #

3 REPAIR PARTS FOR DRINKING FOUNTAINS ACORN (1) (1) (2) (4A) (6) (7) SQUARE, OUTDOOR, STEEL, WALL-MOUNTED DRINKING FOUNTAIN (FOR NON-FREEZE CLIMATES) Valve cartridge with foam washer Retaining ring and button assembly Recessed push-button valve assembly 4A Standard CP brass bubbler 4B "F" Option flexible bubbler assembly 5 Allen flat-head screw Flat drain adapter gasket "Y" strainer 8 P-trap 9 Allen button-head screw 10 Hex driver bit LOOKING FOR A WATER COOLER OR DRINKING FOUNTAIN NOT FEATURED HERE? GIVE US A CALL! WE CAN HELP YOU FIND WHAT YOU'RE LOOKING FOR! (2) (5) (6A) (1 Bottom) (7 Bottom) (6 Bottom) FREEZE-RESISTANT, SQUARE, OUTDOOR, STONE ADA FOUNTAIN Non-metering servomotor Water diaphragm assembly 3 Long set screw Stone cantilever push-button assembly Push-button diaphragm 6A Standard CP brass bubbler 6B "F" Option flexible bubbler assembly 7 Allen flat-head screw 8 Flat drain adapter gasket 9 1-1/4" OD Elbow/ compression assembly 10 Long drain tube 11 O-ring 12 Elbow assembly CHECKSTOP STRAINER SERVOMOTOR DETAIL Complete checkstop strainer Stop bonnet O-ring O-ring Stop stem Spring Check stem Strainer 9 Stop body assembly O-ring 11 Self-tapping screw 13-3

4 REPAIR PARTS FOR DRINKING FOUNTAINS BUBBLER (R 6011) Bubbler w/ washer Washer for socket 3 Socket Supply tube (Valve to bubbler) Lock ring Adjusting nut Spring Spring chamber Lock nut Washer Diaphragm Yoke Sleeve Static seal Washer Seat washer holder Seat washer Seat washer plate Screw 20 Valve body Lock nut Friction washer Escutcheon Stem Retaining washer Spring Friction washer O-ring Static seal Spring housing Cam Ball race Handle Pin Handle nut Handle cap Supply tube (stop to valve) 38 Stop body Seat washer screw Seat washer Stem w/ washer & screw Cap washer Stuffing box cap Stem packing Stuffing nut Valve S/A 47 Stop S/A Sleeve S/A AMERICAN STANDARD (11) (12) (23) (15) (24) (16) (25) (17) (26) (30) (33) (34) (40) (42) (44) (9) (10) (22) (28) (36)

5 REPAIR PARTS FOR DRINKING FOUNTAINS 360, 361 & 362 BUBBLER Bubbler cartridge repair kit Cap nut Cap Bushing holder Regulator screw Spring Locknut Bushing THESE Spring PARTS 10 Bushing NOT 11 Lock washer AVAILABLE 12 Brass washer SEPARATELY 13 Diaphragm 14 Brass washer 15 Pins 16 Seat piece Seat holder 18 Seat washer 19 Plug Gasket 21 Jet 22 Screen 23 Stream straightener 24 Fiber gasket Screen Rubber washer Flange Rosette Locknut Coupling nut Jet subunit assembly WALL-MOUNTED DRINKING FOUNTAIN Wall-mounted drinking fountain, with stainlesssteel bowl and lever handle with self-closing valve. Comes with wallmounting bracket. Part # CENTRAL BRASS (29) (1) (2) (30) (26) (31) (27) (28) COMPLETE BUBBLERS Part # Description Model Model Model

6 REPAIR PARTS FOR DRINKING FOUNTAINS 364-L DRINKING FAUCET Cap Sleeve Samson nut Square nut Brass washer Handle Ball retainer 8 Self-closing stem & centerpiece Centerpiece Gasket Packing Brass washer Spring Gland Spring Self-closing stem subassembly Washer Screw Seat Rosette Locknut Coupling nut Guard 24 Web 25 Elbow Regulator washer Regulator stem w/ washer Regulator cap CENTRAL BRASS (19) (20) (21) (22) (1) (10) (14) (5) (11) (16) COMPLETE BUBBLERS Part # Description Male shank Female threads (15) (6) (13) (18)

7 REPAIR PARTS FOR DRINKING FOUNTAINS MODEL LK4410FRK OUTDOOR TUBULAR FOUNTAIN Item # Part # Description 1 Drain gasket 2 Gasket 3 Clamp - hose 4 Drain gasket 5 Fitting - double male connector 6 Retaining nut Hex nut 1-5/16" 8 Kit - bubbler (VR) 9 Push-button actuator 10 Slip joint nut 1-1/4" 11 Drain plug 1-1/2" 12 Fountain body 13 Access panel 14 Push-button sleeve 15 Drain tube 16 Bottom cover 17 Regulator holder 18 Drain elbow 1-1/4" Regulator nut Regulator 21 Drain tube 22 Fitting 1/14" x 1-1/4" 23 Tube assembly 24 Basin 25 Pinned Torx screw 26 Pressure fitting 27 Single-control valve system complete 28 Single-control valve assembly 29 Rainbird check valve 30 Acorn valve assembly 31 Flow control fitting ELKAY (7) (19) ITEM ITEM 30 DETAIL (1) (18) (1) (6) (7) 13-7

8 REPAIR PARTS FOR DRINKING FOUNTAINS EDFPB117 SERIES WALL-HUNG DRINKING FOUNTAIN Bubbler assembly FOR BUBBLER PARTS, PLEASE SEE PAGE Swirlflow basin 12 Lower shell 13 Fountain body 14 Cover plate 15 Sleeve 16 Push-button pin 17 Push-button Regulator holder Regulator 20 Retaining nut (available in kit only, see item 18) 21 Drain gasket 22 Drain/tailpipe assembly /2" Drain plug 24 Poly tubing 25 Back panel 26 AP-99 panel (optional) 27 Screw 28 Screw 29 Screw 30 Screw 31 Set screw 32 Elbow fitting Strainer 34 Push-button spring 35 Back-panel assembly ELKAY GENERIC BUBBLER Hex nut Button Retaining nut Cartridge assembly brass Cartridge assembly plastic Screen Washer Orifice assembly Spanner wrench COMPLETE BUBBLER Part # (4) (1) (6) (10) (18) (19) (2) (3) (7) (33) (8) (4) 13-8

9 REPAIR PARTS FOR DRINKING FOUNTAINS HAWS PEDESTAL-MOUNT CONCRETE DRINKING FOUNTAIN, MODEL Bibb faucet 2 Access plate Bubbler head Waste strainer Push-button assembly Fountain valve 7 Screwdriver stop Below Valve repair kit (3) (5) (4) COMMON REPAIR PARTS (6 top, 8 bottom) BARRIER-FREE WALL-MOUNT FOUNTAIN 1 P-trap Strainer assembly Bubbler head Push-button assembly 5 Back panel 6 Mounting plate 7 Access plate Valve 9 Nozzle driver Above Valve repair kit (4) (3) 6462 (2) 13-9

10 REPAIR PARTS FOR DRINKING FOUNTAINS HAWS MODEL 5054LF BUBBLER VALVE A Valve handle assembly (includes items 1-14) Lever handle with set screw Not Shown Bubbler head HAWS COMMON REPAIR PARTS 5054LF AND 5051LF BUBBLER VALVES HAWS MODEL 5051LF BUBBLER VALVE A Valve handle assembly (includes items 1-14) B Repair Kit Lever handle with set screw Cap nut Not Shown Bubbler head (A) COMPLETE VALVE Part # COMPLETE VALVE Part # (B) HAWS MODEL 5017LF BUBBLER VALVE A Cartridge assembly with gasket Push-button Cover hex nut Retainer nut 7 Strainer screen COMPLETE VALVE Part # HAWS BUBBLER VALVE MODEL 5010 A Repair kit (includes 1-3) 1 Cartridge assembly 2 Screen 3 Washer Wrench spanner for retainer nut removal Push-button Cover hex nut 7 Spout with O-ring Retaining nut (4) (A) (A) (8)

11 REPAIR PARTS FOR DRINKING FOUNTAINS HAWS MODEL 5830LF VALVE A Valve handle assembly (includes items 1-14) B Repair kit NLA Cross handle with set screw Lever handle with set screw HAWS HAWS MODEL 5851LF VALVE Part # Description Valve handle assembly (includes 1-18) Repair kit Lever handle with set screw (6, 19) HAWS VALVE MODEL 5871, REPLACED BY MODEL 5874PB A Repair kit (includes items 1-7) B NLA Complete valve (A) (B) (B) Repair Kit includes 7, 11, 10, 13,15 and 18 COMPLETE VALVE Part # COMPLETE VALVE Part # Part # Used to remove retainer nut (A) HAWS MODEL 5872 AND 5872HF A Repair kit (includes items 1-8) B NLA Complete valve HAWS MODEL 5703M BUBBLER HEAD Lead-free, chrome-plated. Assembly includes locknut and washers,.4 GPM flowcontrol spud and compression elbow. Part # (A) 13-11

12 REPAIR PARTS FOR DRINKING FOUNTAINS HAWS HAWS PUSH-BUTTONS MODEL 5874PB, 5874PBF, PBA7, PBA6 AND VRK5874 KOHLER MILLBROOK WALL-MOUNTED DRINKING FOUNTAIN 5874PB Polished chrome-plated recessed push-button with valve for use on fountains with recessed push-buttons. Part # Strainer body Strainer plate Stem assembly 4 Serrated lever handle Lever handle assembly Washer 5874PBF Polished chrome-plated flanged push-button with valve. For use on fountains with flush-mount pushbuttons. Part # GLENBROOK SEMI-RECESSED DRINKING FOUNTAIN PBA7 Polished chrome-plated recessed push-button only. Part # PBA6 Polished chrome-plated flanged push-button only. Part # VRK Valve repair kit Part # Bubbler head 2 Bubbler shank 3 Pressure regulator assembly Strainer plate Strainer body Lever handle assembly 7 Lever handle 13-12

13 REPAIR PARTS FOR DRINKING FOUNTAINS SELF-CLOSING VALVE FOR DRINK- ING FOUNTAIN WITH EXPOSED SUPPLY FITTING Cap Lock washer Adjusting nut Washer Handle Ball & Frame assembly Lock ring Bonnet O-ring O-ring Washer Spring Stem w/ washer Seat washer Screw Sleeve Renewable seat 18 Body Self-closing unit (items 1 thru 17) KOHLER SELF-CLOSING VALVE FOR RECESSED DRINKING FOUNTAIN Part # SELF-CLOSING VALVE FOR SEMI-RECESS FOUNTAIN AND SELF-CLOSING VALVE FOR WALL HUNG FOUNTAIN Cap Lock Adjusting nut Washer Handle Ball & Frame assembly Lock ring Bonnet assembly (8-11) O-ring Cup Washer Spring Stem w/ washer Seat washer Screw Nut Gasket (2 required) Renewable seat 19 NLA Body w/ seat for NLA Body with seat for Self-closing unit (items 1 thru 15) SELF-CLOSING VALVE FOR DRINKING FOUNTAIN WITH EXPOSED SUPPLY FITTING Part # VALVE SELF-CLOSING VALVE PEDESTAL DRINKING FOUNTAIN Part # VALVE 13-13

14 REPAIR PARTS FOR DRINKING FOUNTAINS MDF (MOST DEPENDABLE FOUNTAINS, INC.) REPAIR PARTS FOR FREEZE-RESISTANT FOUNTAINS ( ) AIR DIAPHRAGM ASSEMBLY Part # RAINBIRD DRAIN Part # AIR-CONTROLLED DIAPHRAGM With accessory parts Part # DIAPHRAGM KIT Part # MUSHROOM BAR F Part # REPAIR PARTS FOR FREEZE-RESISTANT FOUNTAINS (2012-PRESENT) EV-V14 1/4 SOLENOID VALVE Part # /8" CHECK VALVE Part # RAINBIRD DRAIN Part # MUSHROOM PUSH-BUTTON Part # RETRO KIT FOR OLD CHINA DRINKING FOUNTAINS RETRO KIT Part #

15 REPAIR PARTS FOR DRINKING FOUNTAINS MURDOCK M-30 RETRO SERIES OCTAGON SINGLE HEIGHT FOUNTAIN WITH FOOT PEDAL Top bolt Automatic flow assembly (items 2 & 4) 3 Spring case & guide Flow-control valve Valve bonnet 6 Valve body, packed Cage Spring 9 Side-stream bubbler 10 Valve stem, bottom connection, tail nut & tail 11 Pedal spool 12 Bottom connection Pedal Pedal bolt 15 Tail nut 16 Tail 17 Upper waste w/ spring support Pinch screw 19 Bowl & yoke Nozzle head Mouth guard w/ bolts Valve body only Valve packing ring Seat washer screw Seat washer Cup washer Ring washer Valve stem /4" Waste tube 30 Base - specify 30" or 34" GR SERIES (MODEL GRC75) BARRIER-FREE, WALL-MOUNTED DRINKING FOUNTAIN Valve cartridge with foam washer Retaining ring and button assembly Recessed push-button valve assembly 4A Standard chrome-plated brass bubbler 4B "F" option flexible bubbler assembly 5 Allen flat-head screw Flat drain adapter gasket "Y" strainer 8 P-trap 9 Allen button-head screw 10 Hex driver bit (6) (7) (1) (2) (4A) 13-15

16 REPAIR PARTS FOR DRINKING FOUNTAINS F140R-301 AND DF-2601 "RADII" NON-REFRIGERATED DRINKING FOUNTAIN Bubbler valve 2 Drain screw 3 Fountain-top assembly 4 Bubbler nut Under-top washer Nut 7 Bowl bottom 8 Fountain arm 9 Cartridge-holder nut ring 10 Push-button 11 Hex cover nut Waste gasket 13 Waste assembly 14 In-line strainer 15 Straight tube 16 Reducing union 17 Union 18 Union elbow 19 White tubing 20 Sponge tubing insulation 21 Cartridge holder Cartridge 23 Washer/spacer 24 Retaining metal high nut 25 Bottom plate OASIS (SUNROC) (1) (5) (6) (12) (22) 13-16

17 REPAIR PARTS FOR DRINKING FOUNTAINS 1 1-1/4 CP Theft-proof drain 2 S/S Drinking fountain bowl 3 Ell FIPS x 1/4 Barb S/S 4 1-1/4 Slip x 1-1/4 male adapter PVC 5 1-1/4 PVC (41 total) 6 1-1/4 90 PVC Elbow 7 1-1/4 X 1-1/4 PVC Compression coupling Push-button (new style) 2000 (See page 13-18) CP Bubbler #312 (See page 13-18) 10 5/8 Hose washer #HW /8 Brass lock nut 12 3/8 x 2 S/S Nipple 13 3/8 Coupler 14 3/8 x 4 Nipple 15 3/8 FPT x 1/4 MFL S/S Adapter /2 Gasket #W /2 Lock nut /4 x 3 Spec. galvanized nipple STERN WILLIAMS ADF-3700, 01 WATER FOUNTAIN 19 Aluminum bowl retainer /4 Cast lock nut /4 FIPS x 1-1/4 Slip adapter PVC /4 Sanitary tee PVC 23 1/2 S/S Hose clamp 24 1/4 S/S Barb tee 25 1/2 MPTx 1/4 MFL S/S Adapter 1/4 Nylon flare washer 26 1/2 Lockshield stop 27 1/2 OD/1/4 ID Reinforced vinyl tubing (96 total) 28 Strainer-Y 29 1/4 MIPS x 1/4 Barb adapter S/S 1/4 Nylon flare washer /4 Washer for slip nut 1-1/4 x 1-1/4 SC Slip joint nut /4 x 4 Straight tailpiece 32 Push-button (old style) (See page 13-18) SEE PAGE SEE PAGE FOR ADDITIONAL PUSH-BUTTON AND BUBBLER PARTS SEE NEXT PAGE. SEE PAGE (8) (9) 13-17

18 REPAIR PARTS FOR DRINKING FOUNTAINS STERN WILLIAMS PUSH-BUTTON AND BUBBLER ASSEMBLY PARTS 1 Cover 2 Button 3 Retainer nut Regulator (brass) Regulator (plastic) 5 Ring nut 6 Lock nut 7 Brass housing Complete push-button assembly (prior to 11/1/2000) 9 Bubbler housing 10 Orifice assembly 11 O-ring 12 Washer 13 Lock nut (not shown) 14 NLA Bubbler assembly (includes #9-11) use # Push-button 16 Set screw 17 Body 18 Snap ring 19 Ring nut 20 Hex nut (included with #23) 21* Rubber washer 22* Regulator Complete push-button assembly (after 11/1/2000) 24 5/32 Hex wrench Bubbler 8 23 * Insert Part #24 through Part #15 to adjust Part #16 to set water stream. Each replacement #2316 requires 1 piece item # (4) (8) (4) (14) 13-18

19 REPAIR PARTS FOR DRINKING FOUNTAINS #5400 ALL-PURPOSE DRINKING FOUNTAIN, ADA-ACCESSIBLE 1 Theft-proof drain 2 Gasket 3 Locknut 4 Stainless-steel drinking fountain bowl 5 Galvanized coupling 6 Galvanized reducer CP Bubbler (See page 13-18) (NLA use ) 8 Hose washer 9 Brass locknut 10 S/S nipple 11 Reinforced vinyl tubing 12 1/4" x 1/4" MIP barb ell Push-button (See page 3-18) 14 Hose barb elbow /4" Flex hose 16 Hose barb adapter 17 Straight tailpiece 18 Slip joint nut and washer STERN WILLIAMS #5700 METAL PEDESTAL, BARRIER-FREE DRINKING FOUNTAIN 1 Theft-proof drain CP Bubbler (See page 13-18) (NLA use ) 3 Hose washer 4 Stainless-steel drinking fountain bowl 5 Gasket 6 Brass locknut 7 S/S nipple 8 Ell, FIPS x 1/4" barb 9 Galvanized coupling 10 Locknut 11 Galvanized reducer 12 Hose barb elbow 13 Reinforced vinyl tubing Push-button (See p ) 15 1/4" x 1/4" MIP barb ell 16 Hose clamp 17 1/4" Nylon flare washer 18 1/4" Barb tee 19 Hose barb adapter 20 PVC Slip adapter 21 PVC Connector 22 Slip x male adapter 23 PVC Connector /4" Sanitary tee 25 PVC Connector 26 Slip x male adapter 27 Straight tailpiece 28 Slip joint nut and washer 13-19

20 REPAIR PARTS FOR GLASS FILLERS 1-9/16" Underside of handle is open (1) UNIVERSAL HOT-WATER VALVE AND STEM ASSEMBLY # Gooseneck assembly Handle assembly (OEM) Handle assembly (replacement) 3, Hot-water handle assembly Cap Body nut 6 Body gasket 7 Washer 8 NLA Valve stem assembly UNIVERSAL HOT-WATER VALVE AND STEM ASSEMBLY # Hot-water dispenser valve assembly Handle 5 Cover body Valve stem assembly (6) ELKAY PUSH LEVER GLASS FILLER MODEL LK Valve and handle replacement kit 2 Nipple assembly 3 Rubber washer 4 Nipple 5 Washer Locknut Underside of handle is closed (3, 8) "HOT" GLASS FILLER HANDLE Part # Underside of handle is closed RED GLASS FILLER HANDLE Part # Underside of handle is open GLASS FILLER REPAIR KIT With black handle Part # HALSEY TAYLOR UNIVERSAL GLASS FILLER ASSEMBLY KIT Kit contains all pieces necessary for field installation attachment of glass filler into the openings on all glass filler-accessible Halsey Taylor units. For HAC, WM, SW, SCWT, XP and S series units. Kit consists of: Gooseneck glass Bubbler nipple filler and lever 1/4" poly tube 1/4" tube connector 1/4" tee tube connector Gasket Instruction manual Part # Underside of handle is closed BLACK GLASS FILLER HANDLE Part #

21 AQUA-ACCESS BARRIER-FREE WATER COOLER 1 Fan blade 2 Fan motor Fan motor 220V 3 Compressor Compressor 220V 4 Lower cabinet - granite Lower cabinet - 2 dark bronze Lower cabinet - 3 gold Lower cabinet - 4 stainless steel 5 Start relay Start relay 220V 6 Start capacitor Start capacitor 220V 7 Support strut Gray push-button replacement kit 9 Apron assembly granite Apron assembly - 2 dark bronze Apron assembly - 3 gold Apron assembly - 4 stainless steel 10 Valve assembly (SEE INSET) Valve cartridge (SEE INSET) Cold control 13 Waste tailpiece assembly 14 Drain adapter Flat drain adapter gasket 16 Allen flat-head screw Standard flexible gray bubbler assembly B Option brass Bubbler assembly 18 AquaAccess basin top 19 Allen pan-head screw 20 Y Strainer 21 Hanger bracket 22 Evaporator assembly 23 Back panel 24 Filter/dryer 25 Condenser 26 O.D. LLDPE Tubing, blue 27 Foam pipe insulation 3/8 I.D.x 1/4 thick ACORN (11) CARTRIDGE VALVE 1 Valve cartridge assembly Valve cartridge 3 Jam nut (8) (12) (15) (17) 13-21

22 ELKAY (CORDLEY) WALL-HUNG COOLERS ELKAY (CORDLEY) FLOOR COOLERS 1* Bubbler assembly complete * Orifice assembly Regulator assembly Cover Button Cartridge retainer nut 9* Orifice O-ring Ring nut Locknut Cartridge body assembly 13 Basin top 14 Evaporator foam tank assembly Water temperature control 16 Compressor Compressor (16 GPH cooler) Relay Relay (16 GPH cooler) Overload Overload (16 GPH cooler) 19 Motor (14 GPH and 16 GPH) Blade Blade (16 GPH cooler) Bracket Nut fan blade Washer fan blade Screw motor mount 20 Waste line assembly Waste line & precooler assy. (14 GPH and 16 GPH) 21 Waste line gasket 22 Capillary tube 23 NLA Drier Condenser with shroud * SEE BUBBLER ASSEMBLY PAGE (4) (11) ELKAY Available in kit only MODELS EWCA-8, EWCA-14, EWTLA-8, EWTLA-14, EWA-16, EWTLA-16, WHB-16, WH- BTL-16, WTB-16, WTBTL-16 Note: Some parts limited to in-stock availability (12) (15) MODELS EFA-8, EFA-8P, EFA-14, EFA-14P, EFTL- 8, EFTLA-14, CWB-8, CWB-8P, CWB-14, CWB- 14P, CWBTL-8, CWBTL-14, WFB-8, WFB-8P, WFB-14, WFB-14P, WFBTL-8, WFBTL-14, EFA-16, EFA-16P, EFHA-16, EFTLA-16, CWB-16, CWB-16P, CWBH-16, CWBTL-16, WFB-16, WFB- 16P, WFBH-16, WFBTL (5) (3) (17) (18) 13-22

23 1 Basin 2 Fan shroud 3 Condenser 4 Fan motor Fan blade Bracket Nut Silencer fan blade Bubbler assembly FOR BUBBLER PARTS SEE DETAIL PAGE Drier 16 Compressor 17 Relay Overload 19 Compressor grommet Mounting pin Cold control 23 Power cord 24 Waste line 25 Waste line gasket Basin strainer 27 Evaporator tank 28 Heat exchanger 29 Retainer clip 30 Push-bar bumpers 31 Front Push-bar assembly, vinyl units Front push-bar assembly (S/S) Front push-bar assembly, bronzetone units 32 Bushing 33 Handicap emblem 34 Panel bumpers Hex nut Retaining nut Regulator Cartridge housing assembly 39 Base assembly 40 Pivot rod front 41 Sound-dampening material 42 Pivot rod side 43 Mounting clip 44 Mounting screw 45 Linkage right Linkage left 46 Basin screw 47 Basin clip 48 Panel bumper 50 Side push-bar assembly specify right or left, type of material (vinyl, S/S or bronzetone) 51 Side push lever 52 Mounting screw ELKAY WALL-HUNG WHEELCHAIR LEVEL WITH PRESSBAR (CORDLEY) MODELS EHF-8, EHFS-8, EWCF-8, EWCFS-8, TWCF-8, TWCFS (22) (26) (35) (36) (37) (38) 13-23

24 ELKAY COMMON REPAIR PARTS BUBBLER ASSEMBLY, PART # COMMON REPAIR PARTS BUBBLER ASSEMBLY (1) (2) Complete bubbler assembly Orifice fitting with O-ring O-ring Orifice flow straightener Nut lock 6 Bubbler body 7 Gasket 8 Bubbler nipple Order part # Complete bubbler assembly Orifice assembly Orifice O-ring Adapter Adapter O-ring Guard Bubbler O-ring 8 NLA Pedestal 9 NLA Forging Locknut (3) Vandal resistant bubbler (5) (1) (10) REPLACEMENT WATER FILTERS FOR WATER COOLERS AND BOTTLE FILLERS (4) 1 Filter mounting bracket 2 Union 3 Filter head and bracket assembly WaterSentry Plus for lead, taste and odor replacement filter (each) WaterSentry Fresh for chlorine, taste and odor replacement filter (2 pk) 5 Poly tubing (cut to length)

25 1 Basin 2 Fan shroud 3 Condenser 4 GPH Condenser 8 GPH 4 Fan motor Fan blade Bracket Nut Silencer-fan blade Screw-motor mtg Bubbler assembly FOR BUBBLER REPAIR PARTS, SEE PAGE Drier Cold control 16 Compressor (4 GPH) Compressor (Aspera) Compressor (Tecumseh) 17 Compressor grommet 18 Compressor mtng. washer 19 Mounting pin 20 Relay (4 GPH) Relay (Aspera) Relay (Tecumseh) 21 Overload (Aspera) Overload (Tecumseh) 22 Power cord 23 Precooler assembly (4 GPH) Precooler assembly 24 Precooler bushing 25 Heat exchanger (4 GPH) Heat exchanger 26 Evaporator assembly (4 GPH) Evaporator assembly 27 Drain gasket 28 Drain ring support 29 Drain gasket clamp 30 Wall bracket Water inlet screen (not shown) Regulator holder Hex nut Regulator Retaining nut, O/S brass 35 NLA Lever bearing 36 NLA Regulator lever 37 Locknut 38 Guide pivot 39 Lever adjusting spring 40 Bracket pivot 41 Pressbar - specify color 42 Side bar RH specify color 43 Side bar LH specify color Side bar clip 45 NLA Pivot bushing 46 NLA Pivot bushing clip 47 NLA Pressbar spring 48 NLA Pivot bracket clip ELKAY ELKAY (CORDLEY) WALL-HUNG WHEELCHAIR LEVEL WITH PUSH-BAR 49 NLA Bracket spacer Rivet and pivot block 51 Screw # 8x 3/8 52 Screw # 8-32x 1-1/4 MODELS EBFS-4, EBFS-8, CBFS-4, CBFS-8, TBFS-4, TBFS (15) (30) (31) (33) (44) (50) 13-25

26 1 Panel, bottom dispenser 2, Pivot block and rivet 3 Nut, self threading 4 Bracket, side push 5 Panel, right side 6 Panel, left side 7 Panel, front push 8 Pushbar, side (specify color) 9 Pushbar, front (specify color) 10 Bracket, front push 11 Screw 12 Rivet, drive type (see item 2) Bumper, press bar Hex nut 15 Bracket, regulator mounting 16, Regulator holder kit Regulator 18 Holder, regulator 19 Shoulder screw 20 Screw, bracket mounting 21 Wrapper 22 Power cord 23 Fan bracket 24 Fan blade 25 Hex nut, fan blade 26 Fan motor 27 Screw, fan motor ELKAY ELKAY MODELS EHFA8*1F, EHFSA8*1F, EHFA8R*1F AND EHFSA8*3FJO 28 Shroud, fan 29 Clip, front and rear panels Bubbler assembly FOR BUBBLER PARTS, SEE PAGE Condenser 36 Drier 37 Grommet, compressor mounting 38 Hair-pin cotter 39 Washer 40 Compressor service pack 41 Overload 42 Cover, relay 43 Relay Relay repair kit 44 Heat exchanger 45 Tailpipe 46 Strainer assembly 47 Gasket, tailpipe 48 Basin, stainless steel 49 Screw, basin mounting Cold control 51 Evaporator assembly 52 Strainer 53 Angle, bracket corner 54 Bracket, front support 55 Bracket, base mounting 56 Frame, back/bottom 57 Hanger bracket 58 Hanger bracket 59 Tubing, poly (cut to length) BUBBLER PAGE (2, 12) (30) (14) (17) (16, 18) (50)

27 1 Screw Shroud, upper Electrical switch 4 Wiring harness (front side push) Wiring harness (front push) 5 Wire jumper Pushbar, front Pushbar, side 8 Drain fitting 9 Drain adapter Regulator Regulator holder 13 Shroud, fan top 14 Shroud, fan bottom 15 Power cord 16 Fan blade 17 Hex nut, fan blade 18 Fan motor 19 Fan motor screw 20 John Guest elbow 21 Wrapper (specify color) * FOR BUBBLER PARTS, SEE PAGE Condenser 26 Drier 27 Stud, compressor mounting 28 Grommet, compressor mounting 29 Clip, compressor mounting 30 Compressor Serv. Pak 31 Relay 32 Cover, relay 33 Heat exchanger 34 Drain tube 35 Clamp, drain 36 Basin, stainless steel Cold control 38 Evaporator assembly 39 Screw 31, Overload 43 Hanger bracket Regulator nut Bubbler assembly Solenoid valve 47 Poly tubing (cut to length) ELKAY ELKAY EZ & LZ BARRIER-FREE WATER COOLERS (3) (6) FOR BUBBLER SEE PAGE (7) (11) (12) (37) (45) (46) (2) 13-27

28 1 Screw Shroud Switch 4 Wiring harness (front side push) Wiring harness (front push) 5 Wire jumper Pushbar, front Pushbar, side 8 Drain 9 Bumper, press bar Locknut Regulator Holder, regulator 13 Shroud, fan top 14 Shroud, fan bottom 15 Power cord Power cord L/refrig 16 Fan blade 17 Hex nut, fan blade 18 Fan motor 19 Screw, fan motor 20 John Guest elbow 21 Wrapper (specify color) Fitting orifice 25 Condenser 26 Drier 27 Stud, compressor mounting 28 Grommet, compressor mounting 29 Clip, compressor mounting ELKAY ELKAY EZTL AND LZTL SERIES BARRIER-FREE WATER COOLERS 30 Compressor service pack 31 See item 42 Relay 32 See item 42 Cover, relay 33 Heat exchanger 34 Drain tube 35 Drain clamp 36 Basin, stainless steel Cold control 38 Evaporator assembly 39 Screw 40 Housing assembly 41 Pedestal 31, 32 Electrical/Cover/ Overload kit 43 Hanger bracket 44 Screw Regulator nut Bubbler assembly FOR BUBBLER PARTS, SEE PAGE Solenoid valve 48 Poly tubing (cut to length) 49 Drain tube 50 Waste line assembly TL 51 Tube L/refrig to TL 52 Tube drain EZTL 53 Tee 54 Gasket 55 Bubbler body 56 Bubbler nipple Wrapper, filler (not shown) Water filter kit (when provided, not shown) FOR BUBBLER SEE PAGE ,12 45 BUBBLER PAGE REPAIR PART PHOTOS ON PREVIOUS PAGE CALL US FOR WATER FILTER INFORMATION 13-28

29 HALSEY TAYLOR MODELS BFC-7F/FS Projector Gasket Projector nipple Waste gasket Drain plug Strainer plate 7 Waste tube assembly Valve & push-button assembly Valve body assembly Push-button assembly 11 Inlet supply line 12 Valve bracket 13 Front push-bar 14 Push-bar insert (front & side) Hex nut 16 Push-bar lever (BFC-7FS) 17 NLA Side panel insert (BFC-7FS) 18 Side push-bar (BFS-7FS) 19 Wiring harness 20 NLA Receptor 21 Receptor screw 22 Plug button 23 Evaporator/chiller assembly 24 Compressor (includes 25 thru 29) 25 Overload 26 Relay 27 NLA Overload spring NLA 28 Terminal cover 29 Bale strap 30 Condensor 31 Cap tube 32 NLA Fan shroud 33 Fan motor 34 Fan motor bracket 35 Fan blade 36 NLA Fan blade nut 37 Drier Thermostat 39 * Front panel 40 NLA Name plate 41 * Left side panel upper (BFC-7F) * Left side panel upper (BFC-7FS) 42 * Right side panel upper (BFC-7F) * Right side panel upper (BFC-7FS) 43 * Side panel rear (left & right) * Front panel lower NLA Front panel bumper (not shown) Hose clamp (not shown) Cabinet screws (not shown) Mounting bracket (not shown) * Specify Finish HALSEY TAYLOR (4) (5) (1) (2) (3) (6) (8) (10) (38) 13-29

30 1 Panel, bottom dispenser Pivot block kit (includes 12 and 58) 3 Self-threading nut 4 Side push bracket 5 Panel, right (specify color) 6 Panel, left (specify color) 7 Panel, front push (specify color) 8 Pushbar, side & front 9 Insert, push-bar (specify color) 10 Front push bracket 11 Screw 12 Drive type rivet Press-bar bumper Hex nut 15 Regulator mounting bracket Retaining nut Regulator 16, Regulator holder kit 19 Shoulder screw 20 Screw regulator bracket mounting 21 Power cord 22 Fan blade 23 Fan blade hex nut 24 Fan motor 25 Fan motor screw 26 Fan shroud 27 Fan shroud screw 28 Clip front and rear panels Inline strainer 30 Bubbler nipple Chrome bubbler brass Bubbler gasket 33 Condenser 34 Drier HALSEY TAYLOR MODEL HAC4F-Q, HAC4FS-Q, HAC8F-Q AND HAC8FS-Q 35 Panel, right rear (specify color) 36 Panel, left rear (specify color) 37 Panel, front lower (specify color) 38 Stud, compressor mounting 39 Grommet, compressor mounting 40 Clip, compressor mounting 41 Compressor service pack 42 NLA Overload relay Overload relay P600B/427NFBYY 43 Relay cover (specify model) 44 Heat exchanger (specify model) 45 Waste line Drain gasket Chrome drain plug Aztec gold drain plug Chrome strainer plate Aztec gold strainer plate 49 Basin, stainless steel (specify color) 50 Screw, basin mounting (specify color) 51 Plug button (specify color) 52 Cold control 53 Evaporator assembly 54 Screw 55 Evaporator retaining clip 56 Drain plug 57 Electrical shield cover 58 Bumper (inluded with item 12) 59 Drain elbow 60 Slip joint nut 61 Dispenser bottom cover 62 Capacitor (42) (14) (29) (47) (16, 18) (32) (17) (31) and shown on previous page

31 HTV SERIES BARRIER-FREE WATER COOLERS Bubbler gasket (upper and lower) 2 Grommet, compressor mounting 3 Stud, compressor mounting 4 Bubbler nipple 5 Clip, compressor mounting 6 Fan blade 7 Fan motor Cold control 9 Relay cover Electrical switch 11 Power cord Solenoid valve 13 Comp. service pack Overload (also includes items 9 & 43) Regulator holder Chrome bubbler 17 Poly tubing (cut to length) Retaining nut Regulator 20 Drier 21 Evaporator assembly 22 Screw 23 Fan motor screw Hex nut 25 Drain gasket clamp Pushbar spring 27 Elbow 28 Support brace 29 Compressor base 30 Fan motor bracket 31 Hanger bracket 32 Basin, stainless steel 33 Frame 34 Top cover 35 Bottom cover 36 Dispenser bottom Pushbar 38 Drain fitting 39 Fan shroud 40 Condenser 41 Waste line 42 Heat exchanger 43 Relay 44 Screw 45 Screw 46 Screw 47 Screw 48 Screw 49 Screw 50 Filter-mounting bracket 51 Filter assembly HALSEY TAYLOR (1) (8) (12) (10) (15) (19) (24) (14) (16) (26) 13-31

32 HALSEY TAYLOR HTVZ8, HTVZD, HTVZ8W, HTVZDWF SINGLE BARRIER-FREE COOLER 1 Hanger bracket 2 Basin - stainless steel 3 Wiring - front/side push-bar 4 Compressor service pack 5 Tubing - poly (cut to length) Shroud assembly - upper (front and side push) 7 Access panel 8 Drier 9 Kit - drain replacement (bracket/tube/fitting/clamp) 10 Kit - replacement cap/screen/o-ring Kit - solenoid valve/regulator assembly Kit - bubbler assembly 13 Elbow - 5/16-1/4 14 Power cord 15 Kit - pushbar (front & side) Kit - cold control/screws 17 Kit - internal wiring/power cord/black and white jumper wires 18 Kit - fan motor assembly/blade/motor/shroud/screws/nut 19 Kit - condenser/drier 20 Kit- compressor mounting hardware/grommets/clips/studs 21 Kit - Heatx/drier 22 Kit - hardware 23 Kit - electrical/overload/relay/cover 24 Kit - evaporator assembly (11) (16) (6) Detail #

33 MODELS RWM 8/ Projector brass Projector plastic Gasket Combination stop & stream regulator Valve stem assembly Push-button assembly NLA Drain plug (RWM-8A) (plastic) Drain plug (RMW-13A) (plastic) Strainer plate Waste gasket 9 Receptor 10 NLA Storage tank (lowside) Primary temperature control Secondary temperature control 13 Starting capacitor 14 Relay 15 Overload protector 16 Hermetic compressor (includes items 13,14 & 15) 17 Fan motor assembly (includes bracket) 18 Capillary heat exchanger 19 NLA Waste line (RWM-8A) NLA Waste line & precooler (RWM-13A) 20 NLA Condenser 21 NLA Front panel moss gray (5) HALSEY TAYLOR (6) (1) (2) (3) (4) (6) (7) (8) (11) (12) 13-33

34 Projector Gasket 3 Projector nipple 4 Projector supply line 5 Inlet supply line 6 Eared fitting assembly 7 Drain line Drain gasket 9 Receptor 10 NLA Evaporator/chiller assembly (S-3D) Evaporator/chiller assembly (S-5D) Evaporator/chiller assembly (S-10D) Temperature control 12 Relay (S-3D) NLA Relay (S-5D) NLA Relay (S-10D) 13 Overload protector (S-3D) NLA Overload protector (S-5D) Overload protector (S-10D) 14 Compressor (S-3D includes 12 & 13) NLA Compressor (S-5D) NLA Compressor (S-10D) HALSEY TAYLOR MODELS S 3/5/10 D 15 NLA Overload spring 16 Terminal cover 17 Bale strap 18 Fan motor 19 Fan motor bracket 20 Fan blade 21 Condenser (S-3D) Condenser (S-5D) Condenser (S-10D) 22 Condenser shroud 23 Drier 24 NLA Suction/capillary Assembly (S-3D) NLA Cap tube (S-5D) NLA Cap tube (S-10D) 25 Wiring harness 26 Service panel 27 Shelf 28 Base 29 Back panel (S-5D & S-10D) 30 * Front panel 31 * Right side panel 32 * Left side panel 33 NLA Toe plate * Specify Finish GENERIC BUBBLER Hex nut Button Retaining nut Cartridge assembly brass Cartridge assembly plastic Screen Washer Orifice assembly Spanner wrench COMPLETE BUBBLER Part # (4) (1) (6) (2) (3) (7) (1) (2) (8) (8) (4)

35 MODEL S300-2EQ-1J, S500-5EQ-1J AND S EQ-1J Push-button kit Button O/S to N/S Kit 3 Retainer nut (available only in ) Regulator Hex nut Regulator holder 3, 4 Regulator kit (hex nut is 5, brass finish) 7 Basin & drain assembly Chrome bubbler Bubbler gasket (upper and lower) Bubbler nipple Inline strainer 12 Evaporator assembly (specify size) Cold control 14 Power cord 15 Fan motor (specify size) 16 Fan blade (specify size) 17 Fan blade nut 18 Fan motor bracket (specify size) 19 Washer 20 Hair pin cotter 21 Drier (specify size) 22 Heat exchanger assembly (specify size) 23 Condenser (specify size) 24 Front panel (specify color) 25 Cabinet (specify color) 26 Compressor service pack (specify size) 27 Relay cover 28 Overload relay (3 GPH) Overload relay (5 GPH) Overload relay (10 GPH) 29 Fan shroud 30 Poly tubing (cut to length) HALSEY TAYLOR S300-2EQ-1J (3-6) (11) (13) (5) (9) (1) (4) (8) (13 on more current models) (6) (10) 13-35

36 MODELS SCWT 4/8/14A Projector Gasket Valve assembly Projector nipple Push-button cap 6 included in 5 Push-button stem Drain plug Strainer plate Waste gasket 10 Receptor 11 Evaporator/chiller (SCWT-4&8) Evaporator/chiller (SCWT-14) Temperature control 13 Drain tube (SCWT-4) Waste line & precooler (SCWT-8 &14) 14 Precooler baffle (SCWT-8 & 14) 15 NLA Condenser waste line (SCWT-14W) 16 NLA Wire harness 17 Relay (SCWT-4) Relay (SCWT-8) Relay (SCWT-14) 18 Overload protector (SCWT-4) Overload protector (SCWT-8) Overload protector (SCWT-14) 19 Compressor (SCWT-4) NLA Compressor (SCWT-8) Compressor (SCWT-14) 20 Fan motor 21 Fan blade 22 Fan mounting bracket 23 Fan shroud (SCWT-8 & 14) 24 Condenser (SCWT-4 & 8) Condenser (SCWT-14) Condenser (SCWT-14W) 25 Condenser water valve (SCWT-14W) 26 Drier 27 * Front panel 28 * Right side panel 29 * Left side panel * Left side panel (SCWT-14FL) 30 Toe plate 31 NLA Trim panel 32 Receptor (SCWT-14FL) 33 Drain assembly (SCWT-14FL) 34 NLA Waste tube assembly (SCWT-14FL) Drain plug (SCWT-14FL) Push-button stem assembly (SCWT-14FL) 37 NLA Cover plate (SCWT-14FL) * Specify finish (1) (4) HALSEY TAYLOR (2) (7) (9) (8) (35) (3) (5) (12) (36)

37 MODEL SCWT4A-Q, SCWT8A-Q, SCWT14A- Q, SCWT20A-Q Bubbler Drain plug Strainer plate 4 Basin 5 Evaporator (specify size) 6 Power cord 7 Compressor service pack (specify size) 8 Overload/relay assembly (4 & 8 GPH) Overload/relay assembly (14 GPH) 9 Electrical shield 10 Relay cover (specify size) 11 Drain tub assembly 12 Condenser (specify size) 13 Cap push-button Push-button stem 15 Fan motor (specify size) 16 Fan blade (specify size) 17 Fan blade nut 18 Fan motor bracket 19 Drier (specify size) 20 Heat exchanger (specify size) Regulator retaining nut Regulator lever Pivot bracket Regulator retaining bracket 26 Regulator holder (available only in kit ) Regulator Cold control Regulator mounting bracket 30 Side panel, right (specify color) 31 Side panel, left (specify color) 32 Slip joint nut 33 Drain adaptor 34 Capacitor (20 GPH) Front panel (not shown, specify color) HALSEY TAYLOR (23) (24) (25) (28) (27) (14) (29) (3) (22, 26) (1) (2) 13-37

38 MODELS SW-4/6/8/14/16 A Projector Gasket Combination stop & stream regulator Projector nipple Valve stem assembly Push-button assembly Drain plug Strainer plate Waste gasket 10 Receptor Bushing 11 Evaporator/chiller (SW 4A-1, 6A-1, & 8A-1) Evaporator/chiller (SW 14A-1) Evaporator/chiller (SW 16A-1) Temperature control 13 Waste-line assembly (SW 4A-1 & 6A-1) NLA Supply line (also needed) Waste line & precooler (SW 8A-1, 14A-1, & 16A-1) Precooler baffle 14 NLA Starting capacitor (SW 16A-1) 15 Relay (SW 4A-1 & 8A-1) NLA Relay (SW 6A-1) Relay (SW 14A-1) Relay (SW 16A-1) 16 NLA Overload protector (SW 4A-1 & 8A-1) NLA Overload protector (SW 6A-1) Overload protector (SW 14A-1 & 16A-1) 17 NLA Compressor (SW 4A-1 & 8A-1 includes 15 & 16) NLA Compressor (SW 6A-1 includes 15A & 16A) Compressor (SW 14A-1 includes 15B & 16B) Compressor (SW 16A-1 includes 14, 15C, & 16C) 18 Fan motor (SW 4A-1,6A-1, 8A-1 & 14A-1) NLA Fan motor (SW 16A-1) 19 Fan blade 20 Condenser (SW 4A-1, 6A-1 & 8A-1) NLA Condenser (SW 14A-1) Condenser (SW 16A-1) 21 Drier 22 * Front panel 23 * Right side panel 24 * Left side panel Wall hanger (not shown) Lever arm * Specify Finish (1) (2) (3) HALSEY TAYLOR (4) (5) (6) (9) (12) (25)

39 HALSEY TAYLOR WM-8/14/16/20 A-1 (JANUARY 1979 TO JUNE 1979) Projector plastic Gasket Combination stop & stream regulator 4 Projector nipple & supply line assembly Valve stem assembly Push-button assembly Drain plug Strainer plate Waste gasket 10 Receptor & bushing 11 Evaporator/chiller assembly (WM-8A-1) Evaporator/chiller assembly (WM-14A-1) Evaporator/chiller assembly (WM-16A -1 & 20A-1) Temperature control 13 Waste line & precooler 14 Starting capacitor (WM-14A-1) NLA Starting capacitor (WM-16A-1) NLA Starting capacitor (WM-20A-1) 15 Relay (WM-8A-1) Relay (WM-14A-1) Relay (WM-16A-1) Relay (WM-20A-1) 16 Overload protector (WM-8A-1) Overload protector (WM-14A-1 & 16A-1) Overload protector (WM-20A-1) 17 NLA Compressor (WM-8A-1, incudes 15 & 16) Compressor (WM-14A-1, includes 15 & 16) Compressor (WM-16A-1, includes 15 & 16) Compressor (WM-20A-1, includes 15 & 16) 18 Fan motor (WM-8A-1 & 14A-1) NLA Fan motor (WM-16A-1 & 20A-1) 19 Fan blade 20 Condenser (WM-8A-1) Condenser (WM-14A-1 & 16A-1) Condenser (WM-20A-1) 21 Drier 22 * Front panel 23 * Right side panel 24 * Left side panel Wall hanger (not shown) * Specify Finish (5) (7) (9) (1) (2) (3) (12) 13-39

40 HALSEY TAYLOR MODELS WM-8/14/16/20 A-1 (JUNE 1979 & NEWER) Projector Gasket Combination stop & stream regulator 4 Projector nipple & supply-line assembly Valve-stem assembly Push-button assembly Drain plug Strainer plate Waste gasket 10 Receptor 11 Evaporator/chiller assembly (WM-8A-1) Evaporator/chiller assembly (WM-14A-1) Evaporator/chiller assembly (WM-16A -1 & 20A-1) Temperature control 13 Waste line & precooler Precooler baffle (removable) 14 NLA Starting capacitor (WM-16A-1) NLA Starting capacitor (WM-20A-1) 15 Relay (WM-8A-1) Relay (WM-14A-1) Relay (WM-16A-1) 15 Relay (WM-20A-1) 16 NLA Overload protector (WM-8A-1) Overload protector (WM-14A-1 & 16A-1) 16 Overload protector (WM-20A-1) 17 NLA Compressor (WM-8A-1, incudes 15 & 16) Compressor (WM-14A-1, includes 15 & 16) Compressor (WM-16A-1, includes 15 & 16) Compressor (WM-20A-1, includes 15 & 16) 18 Fan motor (WM-8A-1 & 14A-1) NLA Fan motor (WM-16A-1 & 20A-1) 19 Fan blade (5) 20 Condenser & shroud (WM-8A-1) Condenser (WM-14A-1) Fan shroud (WM-14A-1) 20 Condenser & shroud (WM-16A-1, & 20A-1) 21 Drier 22 * Front panel 23 * Right side panel 24 * Left side panel Wall hanger * Specify Finish (7) (9) (6) (12) (1) (2) (3) (8) (25) 13-40

41 MODEL WM8A-3-Q, WM14A-3-Q AND WM16A-2-Q Bubbler (style A & B) Bubbler (bronzetone, style A) Bubbler (bronzetone, style B) 2 Drain plug Strainer plate Strainer plate (bronzetone) 4 Receptor Receptor (bronzetone) Valve assembly (style B) 6 Evaporator (specify size) Cold control 8 Compressor service pack (specify size) 9 Overload (8 GPH) Overload (14 GPH) Overload (16 GPH) 10 Electrical shield 11 Relay cover 12 Precooler (style A) Precooler (style B) 13 Condenser (8 GPH) Condenser (14 GPH) Condenser (16 GPH) 14 Cap push-button Cap push-button (bronzetone) Push-button stem 16 Fan motor 17 Fan blade 18 Fan blade nut 19 Fan motor bracket 20 Drier (specify size) 21 Heat exchanger (specify size) 22 Power cord Regulator retaining nut (style A) Regulator lever (style A) Valve lever (style B) Pivot bracket (style A) Regulator retaining bracket (style A) 23, Regulator holder (style A, kit only) Regulator (style A) Inline strainer 30 Regulator mounting bracket (style A) 31 Side panel, right (specify color) 32 Side panel, left (specify color) 33 Slip joint nut 34 Drain adaptor 35 Front panel (not shown, specify color) HALSEY TAYLOR A (7) (15) B (24) (25) (26) (27) (1) (3) (5) (28) (29) 13-41

42 HALSEY TAYLOR MODELS WT-8/14/16/20A Projector Gasket Stop & stream regulator, plastic body Valve-stem assembly 5 NLA Push-button assembly Drain-plug assembly (brass) (WT-8A) Drain-plug assembly (chrome-plated plastic) (WT-14, 16 & 20A) Strainer plate Waste gasket 9 NLA Receptor (WT-8,14 & 16) NLA Receptor (WT-20A) 10 NLA Storage tank (lowside WT-8A) NLA Storage tank (lowside WT-14&16) NLA Storage tank (lowside WT-20) Primary temperature control Secondary temperature control 13 Starting capacitor (WT-8&14A) NLA Starting capacitor (WT-16&20) 14 Relay (WT-8&14A) Relay (WT-16&20A) 15 Overload protector 16 Compressor (WT-8&14A) includes 13,14,15 Compressor (WT-16&20A) includes 13,14,15 17 Fan-motor assembly 18 Water line (WT-8A) NLA Precooler assembly (WT-14&16A) NLA Precooler assembly (WT-20A) 19 NLA Condenser 20 NLA Capillary heat exchanger (WT-8&14A) NLA Capillary heat exchanger (WT-16&20A) 21 * Front panel specify finish 22 NLA Water-cooled condenser (WT-14W&16W) 23 Condenser water valve (WT-14&16W) (6) (11) (12) (1) (3) (5) NLA (7) (8) (2) (4) (6) 13-42

43 REGULATOR ASSEMBLY 1 Spring 2 Thrust ring Front-cap assembly Left-hand or right-hand valve body, plastic 5 Regulator bushing Diaphragm assembly Complete left-hand valve body assembly Complete right-hand valve body assembly Repair kit contains items 1, 2, 5 & 6 HALSEY TAYLOR (2) (3) (3) (6) , (1-6) UNIVERSAL COLD-WATER LINE 1 Screw Washer 3 Tube (21" long) 4 Armaflex (21" long) Stem assembly 6 Hose coupling Projector nipple Hose clamp 9 Valve-body assembly 10 Valve nut 11 Male connector * Projector gasket * Not Shown (2) (5) (4) (7) (7) (8) COMPLETE ASSEMBLY PART # COMPLETE ASSEMBLY: PART # VALVE-STEM ASSEMBLY Valve spring Washer Stem hex nut Large O-ring 5 Seal cap Valve-stem assembly Small O-ring Stem repair kit contains 1, 2, 7 plus seat-washer screw, seat-washer brass seat, 1133 spring, locknut, 1134 washer and 460 gasket Complete stem assembly Seat washer (not shown) 13-43

44 SELF-CLOSING STEM Screw Seat washer Valve spring Gasket Washer Packing spring Washer O-ring (2 required) Washer Renewable seat Large O-ring Small O-ring Stem-assembly repair kit Note: Parts shown are for bright chrome HALSEY TAYLOR HANDLE PARTS FOR SELF-CLOSING STEM Handle cap Lock sleeve Adjusting nut 16 Washer Cross handle Lever handle Bearing Valve incline Complete assembly lever handle Complete assembly cross handle (1) (2) (13) (15) (11) (9) (10) (12) 13-44

45 PUSH-BUTTON STEM ASSEMBLY # Adjusting collar Set screw Speed clip (2 needed) 4 NLA Snap-in bushing Complete assembly NLA HALSEY TAYLOR PUSH-BUTTON STEM ASSEMBLY # Adjusting collar 2 NLA Snap-in bushing Set screw Complete assembly COLD-WATER SUPPLY-LINE ASSEMBLIES (PLASTIC) Water flow (RH) Part # (flows R to L) Water flow (LH) Part # (flows L to R) (1) BFC CONVERSION KIT Part # /4" NLA COMPLETE PUSH-BUTTON STEM ASSEMBLY #4 Part # PUSH-BUTTON STEM ASSEMBLY # Adjusting collar Set screw Speed clip (2 needed) 4 NLA Snap-in bushing Complete assembly PUSH-BUTTON STEM ASSEMBLY # Adjusting collar Set screw Speed clip (2 needed) 4 NLA Snap-in bushing Complete assembly VANDAL-PROOF RETRO KIT Part # How to vandal-proof your existing Halsey Taylor cooler: 1. Remove snap-in strainer from unit and replace existing drain plug with vandal-proof drain plug. Replace strainer and secure cap screw. 2. Remove projector from unit, if unit is equipped with a plastic projector nipple (see step 3). If not, replace with vandal-proof projector and tighten set screw at bottom of projector. 3. Remove front panel from unit, if necessary, and disconnect water tubing from plastic projector nipple. Replace with brass connection and square projector nipple. Reconnect vandal-proof projector and tighten set screw (1) (1)

46 PUSH-BUTTON ASSEMBLY #1 Item Description 1 Seat washer 2 O-ring 3 Sleeve washer (not shown) 4 Valve spring 5 Seat-washer screw 6 Retaining cup 7 Push-button stem 8 Valve sleeve COMPLETE ASSEMBLY Part # HALSEY TAYLOR PUSH-BUTTON ASSEMBLY #3 Item Description 1 Sleeve seat washer 2 Seat washer 3 O-ring 4 O-ring 5 Sleeve washer 6 Valve spring 7 Seat-washer screw 8 Retaining cup 9 Valve sleeve 10 Push-button stem COMPLETE 11 Stem-repair kit (see ASSEMBLY illustration below) Part # BFC VALVE ASSEMBLY MODEL Valve body (flow L to R) Valve cap 3 Retainer 4 Diaphragm Push-button stem assembly 6 Locknut (2 each) 7 Elbow (2 each) 8 Male connector Watts regulator (1) HALSEY TAYLOR PUSH-BUTTON ASSEMBLY #2 Item Description 1 Gasket 2 Sleeve seat washer 3 Seat washer 4 O-ring 5 Sleeve washer 6 Valve spring 7 Seat-washer screw 8 Retaining cup 9 Push-button stem 10 Valve sleeve VALVE-SEAL REPAIR KIT Includes sleeve seat washer (1), seat washer (2), O-rings (3, 4), sleeve washer (5), valve spring (6), seatwasher screw (7), retaining cup (8) and lubricant (9). Part # (5) COMPLETE ASSEMBLY Part # VALVE-STEM ASSEMBLY #1 Complete brass-stem assembly Part # VALVE-STEM ASSEMBLY #2 Complete plastic-stem assembly Part # (9) VALVE-STEM ASSEMBLY #3 Complete brass-stem assembly Part #

47 MURDOCK ITEM 5 DETAIL 1 Self-retaining J-nut, S/S Valve assembly S/S Nut Retainer 4 Phillips round-head screw Sensor assembly 6 1/4" x 3/8" O.D. Tube union push-in 7 AA 6-Pack battery holder 8 9V Plug-in transformer "Y" Strainer 10 Union tee, 1/4" push-in 11 1/4" O.D. LLDPE Tubing, blue 12 Foam pipe insulation 13 Grommet, 5/8"O.D. BOTTLE FILLER, MODEL BF2 AND MCBF X3/8" S/S Truss Phillipshead Screw 15 Bottle-filler subassembly 16 Bottle-filler top 17 Bottle-filler frame 18 Channel and valve assembly 19 Bottle-Filler Channel 20 Trim (right side) 21 Trim (left side) 22 Nano sensor bracket 23 #8-32 S/S Hex nut 24 Nano sensor spacer 25 #8 S/S Flat washer 26 Internal tooth lockwasher (2) (5) (9) 13-47

48 BF1 SERIES PUSH-BUTTON OPERATED BOTTLE FILLER MURDOCK AIR-CONTROL PUSH-BUTTON ASSEMBLY For bottle-fillers and water coolers with manual push-buttons 1 Push-button assembly (single temp) Escutcheon Push-button 4 Escutcheon retainer Diaphragm Diaphragm retainer /8" ferrule nut (5) (6) (7) SENSOR-OPERATED COOLERS 28 Apron assembly - granite Apron assembly - stainless steel Sensor-op apron assembly granite Sensor-op apron assembly stainless steel 29 Flow restrictor low-flow bubbler only Solenoid/valve-mounting assembly 31 Sensor bracket, sensor-op V DC Sensor 33 Sensor spacer 34 #8-32 Nylon insert locknut 35 #8 S/S Flat washer 36 Power supply, 240VDC 37 Transformer bracket /4" 18 Normally open valve cap 39 Cartridge mounting bracket 40 Valve cartridge assembly (30) (32) (2) (3) 13-48

49 MC71 & MC74 REFRIGERATED ADA WATER COOLER 1 Basin top Low-flow flexible bubbler assembly Stainless-steel bubbler assembly 3 #8 x 3/4" Large Philips flathead self-tapping screw Flat drain gasket 5 Drain tailpiece 6 Back panel 7 Support strut Cold control 9 Apron assembly - granite Apron assemby - stainless steel 10 Valve assembly 11 Push-button 12 Cover - granite Cover - stainless steel 13 Condenser 14 Compressor Compressor - 220V 15 Start relay Start relay Start capacitor Start capacitor Fan blade 18 Fan motor Fan motor - 220V 19 Evaporator assembly 20 Hanger bracket 21 Supply inlet connection 22 #8 x 3/8" Long slotted hexwasher screw 23 #8 x 3/8" Long Philips head sheet-metal screw 24 1/4" O.D. tubing 25 Tube insulation 26 Flow restrictor - low-flow bubbler only Universal maintenance tool MURDOCK (2) (4) (27) (8) 13-49

50 MURDOCK A172.8UBL SERIES REFRIGERATED UNIVERSAL, BI-LEVEL, BARRIER-FREE, WALL-MOUNTED WATER COOLER 1 #8 x 3/4" Large Phillips flat-head, self-tapping screw 2 Basin top 3 #8 x 3/8" Long Allen pan-head screw Low-flow flexible bubbler assembly Stainless-steel bubbler assembly Flat drain gasket 6 Drain tailpiece (short) 7 Drain hose 8 7/8" Spring hose clamp 9 Drain tailpiece (long) 10 Filler plate - granite Filler plate - stainless steel 11 Hanger bracket 12 #8 x 3/8" Large Phillips pan-head screw 13 1/4" OD x 3/8" OD Push-in connection 14 Evaporator assembly 15 1/4" OD tubing 16 Tube insulation 17 Back panel 18 Fan motor Fan motor - 220v 19 Fan blade 20 Condenser 21 Compressor Compressor - 220v 22 Start relay Start relay - 220v 23 Start capacitor Start capacitor - 220v 24 Cold control 25 Left cabinet - granite Left cabinet - stainless steel 26 Right cabinet - granite Right cabinet - stainless steel 27 Support strut 28 Apron assembly - granite 28 Apron assembly - stainless steel Sensor-op apron assembly - granite Sensor-op apron assembly - stainless steel 29 Flow restrictor - low-flow bubbler only 30 Valve assembly 31 Push-button Universal maintenance tool (see #5 below) 33 #8 x 3/8 Long, slotted, hex washer head screw (4) (5) (4 Bottom) 1 CARTRIDGE REPLACEMENT 1 Valve assembly (#5 not included) Flow regulator cartridge (.5 GPM) 3 O-ring & strainer plug Strainer filter screen Universal maintenance tool (2 Bottom) (5 Bottom) 13-50

51 MURDOCK MODEL A171.8 SERIES (ACORN) AND MODEL MC71 (MURDOCK) BARRIER-FREE, WALL-MOUNTED WATER COOLER 1 Basin top Low-flow flexible bubbler assembly Stainless-steel bubbler assembly 3 #8 X 3/4" Lg Phillips flat HD self-tapping screw Flat drain gasket 5 Drain tailpiece 6 Back panel 7 Support strut 8 Cold control 9 Apron assembly - granite Apron assemby - stainless steel 10 Valve assembly Push-button 12 Cover - granite Cover - stainless steel 13 Condenser 14 Compressor Compressor - 220V 15 Start relay Start relay Start capacitor Start capacitor Fan blade 18 Fan motor Fan motor - 220V 19 Evaporator assembly 20 Hanger bracket 21 Supply inlet connection 22 #8 X 3/8" Long, slotted, hex washer HD screw 23 #8 X 3/8" Long Allen pan-head screw 24 1/4" OD Tubing 25 Tube insulation 26 Flow restrictor - low-flow bubbler only Universal maintenance tool (see #5 below) (2) (4) (4 Bottom) CARTRIDGE REPLACEMENT 1 Valve assembly (#5 not included Flow regulator cartridge (.5 GPM) 3 O-ring & strainer plug Strainer filter screen Universal maintenance tool (2 Bottom) (5 Bottom) 13-51

52 A111.8-SO SENSOR COOLER 1 Fan blade, 5 blade 2 Motor, fan 120V 5W 3 Compressor assembly, with accessories 4 Lower cabinet - granite Lower cabinet - stainless steel 5 Relay, PCT starting 6 Capacitor, run type 7 Support strut 8 240V AC/9V DC transformer 9 Transformer bracket Valve-cartridge assembly Flow-regulator cartridge (0.5 GPM) 12 Cartridge mounting bracket, sensor operated Sensor assembly, infrared, latching 14 Bracket, sensor 15 Sensor spacer Solenoid/valve-mounting assembly 17 Apron assembly - granite Apron assembly, stainless steel Cold control 19 Waste tailpiece 20 Flat-drain adapter gasket 21 Flat-head screw 22 Low-flow bubbler assembly Solid stainless-steel bubbler assembly 23 Cooler top 24 Pan-head screw 25 "Y" Strainer assembly, 1/4" NPT 26 Hanger bracket 27 Evaporator assembly 28 Back panel 29 Filter/dryer 30 Condenser 31 1/4" O.D. LLDPE tubing, blue 21 Foam pipe insulation 3/8" I.D. X 1/4" thick (13) (16) MURDOCK SOLENOID VALVE ASSEMBLY Solenoid valve Water diaphragm (2) (8) Additional parts are available for this item. Please call us for more information (10) (11) (18)

53 MURDOCK OASIS OLD STYLE NEW STYLE MODEL MCBF2 BOTTLE FILLER 1 Self-retaining J-nuts Valve assembly 3 Stainless-steel nut retainer 4 Socket cap Sensor assembly 6 Push-in tube union 7 AA Battery holder 8 9V Plug-in transformer 9 Y strainer 10 Push-in union tee 11 Tubing 12 Foam pipe insulation 13 Grommet 14 Screw 15 Bottle-filler subassembly 16 Bottle-filler top 17 Bottle-filler frame 18 Channel and valve assembly 19 Bottom filler channel 20 Trim (right) 21 Trim (left) 22 Nanosensor bracket 23 Hex nut 24 Nanosensor spacer 25 Flat washer 26 Internal tooth lockwasher 27 Shut-off valve 28 Bottle-filler top bracket (2) (5) LOOKING FOR MANUAL PARTS FOR A MANUAL PUSH- BUTTON BOTTLE FILLER? SEE ACORN, PAGE OASIS MODEL VALVE, OLD STYLE AND NEW STYLE Handle assembly w/ set screw Nozzle and straightener assembly (O/S or N/S) 3 Plastic chrome guard 5 Washer, requires 2 (N/S) 6 Washer (O/S NLA, use N/S) Stem assembly (O/S or N/S)* Adjusting screw (O/S)* Spring (O/S) Nut (O/S) Sleeve & diaphragm assembly (O/S) Piston, regulator (O/S) Friction washer (O/S) Gasket, valve body (O/S) 7-15 Valve body assembly 16 Nozzle screen (N/S) 17 Adjusting needle (N/S) 18 O-ring (N/S) 19 Flow washer retainer (N/S) 20 Flow washer (N/S) 21 Gasket (N/S) 22 Gasket (N/S) *Stem assembly will fit O/S or N/S, adjusting screw will not (1) (2) (7) COMPLETE VALVE Part #

54 VERSAFILLER MODEL PWSBF (RETRO-FIT) AND P*SBF SERIES DRINKING FOUNTAINS/ VERSAFILLER COMBO 1 Alcove 2 Wrapper 3 Cap 4 Screw 5 Drip tray 6 Grill tray 7 Drip tray bottom cap 8 Button 9 Spring 10 Gasket 11 Short drain 12 Cartridge stem holder Cartridge 14 Retaining plastic nut 15 Valve bracket 16 Hole plug 17 Washer/spacer/gasket 18 Screw 19 Union elbow 20 Fill-tube assembly 21 Fill-tube support bracket 22 Screw 23 Nameplate insert 24 Tube 25 Screw 26 Frame 27 Snap bushing 28 Union tee 29 Tube 30 Sponge tubing insulation 31 Drip-tray assembly Button assembly 33 Valve assembly OASIS SEE FIGURE BELOW (13) 13-54

55 EBCO MODEL NUMBERS EP8WM EP8WM-E EP8WM-AE WEWC08 WEWCO8-SG WEWCO8-SA OASIS (INCLUDES EBCO) OASIS MODEL NUMBERS PLF8WMQ PLF8WMD PLF8WMQA PLF8WM PSF8WMD PLF7WMQS Item Description 1 specify finish* specify finish* Front housing 2 specify finish* specify finish* Left side panel 3 specify finish* specify finish* Right side panel 4 specify finish* specify finish* Front panel 5 NLA NLA NLA Front bezel 6 NLA NLA NLA Left-side bezel 7 NLA NLA NLA Right-side bezel Valve body gasket Washer (under-top) NLA NLA Valve assembly 12000A Valve assembly (PLF-001 Series) 11, Overload & relay 13 Compressor Cold-control thermostat 15 Service cord 16 Top Waste gasket 18 Frame assembly 19 Fan blade 20 Condenser 21 Fan shroud 22 Fan motor bracket 23 Fan motor 24 Cooling tank insulation (RH) 25 Cooling tank insulation (LH) 26 Waste assembly 27 Cooling tank & heat exchanger Solenoid valve 29 - NLA NLA Membrane switch 30 - NLA NLA Switch pad 31A PC board 31B PC board (timed) 32 NLA NLA NLA Line-head screw Gasket (under-top) 34 NLA NLA NLA Hanger not shown Friction washer not shown Water inlet fitting (8) (9, 33) (10) (14) (11) (17) *Finishes: Sandstone, Stainless Steel or Tan (28) (not shown in drawing) 13-55

56 EBCO OASIS P8AM AND PAM 1 NLA Front nose (specify color) 2 Housing (specify color) 3 NLA Panel, side left (specify color) 4 NLA Panel, side right (specify color) 5 NLA Panel, front (specify color) Bubbler valve 6A Projector nozzle Gasket Washer, under-top Nut 10 Cord assembly, power supply Overload Relay 13 Compressor assembly (includes 11 & 12) Cold control 15 Top 16 Screw Waste gasket 18 Waste assembly, insulated 19 NLA Insulation, waste assembly 20 NLA Insulation, cooling tank RH 21 NLA Insulation, cooling tank LH 22 Cooling tank assembly, insulated 23 Fan shroud 24 Fan blade 25 Fan motor bracket 26 Fan motor 27 Condenser 28 Drier, refrigerant 29 Frame, back/bottom 30 Strut, support 31 Angle, cross brace 32 Hanger bracket 33 Shelf, activation 34 Push-button assembly, RH Push-button assembly, LH 35 Push-button, front 36 Body, push rivet 37 Push rivet 38 Screw, adjust 39 Rod, activation 40 Bushing, rod Valve body Stem assembly 43 Wheel arm, valve 44 Clip, U-type 45 Tube assembly, valve to bubbler OASIS (INCLUDES EBCO) (6A) (9) (12) (6) (17) (41) (8) (11) (14) (42) 13-56

57 OASIS (INCLUDES EBCO) MODELS P8AC-D300, PAC-001 Part # Part # Item P8AC-100 PAC-001 Description 1 Top Bubbler Vinyl coated bubbler valve Gasket Washer, under-top Locknut 6 N/A Condenser 7 Side panel, left sandstone Side panel, left greystone Side panel. left stainless steel 8 N/A Blade, fan 9 N/A Motor, fan 10 N/A Bracket, fan motor Waste gasket 12 Hanger bracket 13 Side panel, right sandstone Side panel, right greystone Side panel, right stainless steel 14 N/A Service cord 15 Frame 16 Waste assembly 17 N/A Insulation, right cooling tank 18 N/A Insulation, left cooling tank 19 N/A Cooling tank, insulated N/A Cold control 21 N/A Overload/relay combination 22 N/A Compressor (includes 22) 23 Front panel, sandstone Front panel, greystone Front panel, stainless steel 24 Front nosepiece, sandstone Front nosepiece, greystone Front nosepiece, stainless steel 25 Bracket, valve 26 Supply line, top Cartridge 28 Retaining nut, cartridge 29 Push rod Push pad, left or right Push pad, front 32 Activation shell 33 N/A Drier, refrigerant (20) Parts not shown N/A Strainer, in-line Capacitor (4) (11) (27) (2) (2) (3) (30) (31) 13-57

58 OASIS (INCLUDES EBCO) MODELS P8AC-H300, P8ACSL-H310 Item # P8AC-H300 P8ACS-H310 PACS-O11 Description 1 Top Bubbler Washer, undertop Locknut 5 Bubbler nut 6 N/A Condenser 7 Side panel (specify finish) 8 N/A Blade, fan 9 N/A Motor, fan 10 N/A Bracket, fan motor 11 Drain screw Waste gasket 13 Hanger bracket 14 Side panel, right (specify finish) 15 N/A Patch plate (specify finish) 16 N/A Service cord 17 Frame 18 Waste assembly 19 N/A Insulation, right cooling tank 20 N/A Insulation, left cooling tank 21 N/A Cooling tank, insulated N/A Cold control 23 N/A Relay 24 N/A Overload 25 N/A Start capacitor - 60 MFD 26 N/A Run capacitor - 25 MFD 27 N/A Compressor assembly 28 Front panel (specify finish) 29 Front nosepiece, sandstone Front nosepiece, greystone Front nosepiece, S/S Activation assembly 31 Waterline, tank to valve N/A Waterline, inlet to valve or tank 32 Union elbow fitting JG 33 1 Cartridge holder Cartridge Retaining nut, cartridge 36 Waterline, tank or valve to bubbler 37 Shelf 38 N/A Drier 39 Activation shelf 40 N/A Waste tee (2) (4) 41 N/A Waste arm assembly 42 N/A Waste elbow 43 N/A Waste extension tube (12) (34) Parts not shown In-line strainer (30) (35) 13-58

59 WALL-MOUNTED WATER COOLER MODEL ADA-8N 1 Compressor 2 Relay 3 Overload 4 Fan blade 5 Fan shroud 6 Fan bracket 7 Wall cord 8 Condensor Thermostat 10 Evaporator assembly Bubbler, flex spout Bubbler, lead-free brass Safety-Gard spout assembly Cartridge 13 Water-control assembly Drain washer Drain screw 16 Tailpiece 17 Drain adapter 18 Slip joint nut 19 Slip joint washer 20 Capillary tube 21 Drier 22 Stainless-steel top Y strainer 24 Stainless-steel wrapper Granite wrapper 25 Stainless-steel front apron Granite front apron 26 Stainless-steel left panel Granite left panel 27 Stainless-steel right panel Granite right panel 28 Hanger bracket Side handle mechanism Front handle mechanism Side handle mechanism 33 Cartridge rocker 34 Handle rocker 35 Side-handle pins 36 Pin clips 37 Front-handle pin 38 Base plate SUNROC (9) (11) (11) (12) (14) (23) 13-59

60 WALL-MOUNTED WATER COOLER MODEL HCWC-8F & HCWC-8 1 Compressor R134A Compressor 115V (uses Spade connection) 2 Overload Overload (uses Spade connection) Relay Relay (uses Spade connection) 3 Fan motor Fan motor (uses Spade connection) 4 Fan blade 5 Wiring harness Wiring harness (uses Spade connection) Cold thermostat Cold thermostat (uses Spade connection) 7 Condenser 8 Evaporator 9 Water-control assembly Cartridge Cobra spout (metal) Safety-Gard assembly 12 Drain fitting 13 Drain grid 14 Drain washer 15 Tailpiece 16 Basin 17 Activator plate 18 Stainless-steel wrapper assembly Granite wrapper assembly 19 Stainless-steel complete apron assembly Granite complete apron assembly 20 Left-side pushbar chrome Left-side pushbar gray Left-side pushbar suntan 21 Right-side pushbar chrome Right-side pushbar gray Right-side pushbar suntan 22 Center pushbar chrome Center pushbar gray Center pushbar suntan 23 Sidebar screw Spacer 25 Frontbar screw Spacer 27 Pivot plate 28 Mounting bracket 29 Handle frame 30 Extension spring "Y" strainer (6) SUNROC (11) (24, 26) (31) (10) (11)

61 WALL-MOUNTED WATER COOLER MODEL NSW-8 1 Compressor 2 Overload Relay 3 Fan motor Fan motor (uses Spade connection) 4 Fan blade 5 Wiring harness Wiring harness (uses Spade connection) Cold thermostat Cold thermostat (uses Spade connection) 7 Condenser 8 Drier "Y" strainer 10 Precooler 11 Evaporator Drain washer 13 Water-control assembly Cartridge 15 Fiber washer 16 Toggle lever Push-button 18 Hole cover Cobra spout (metal) Safety-Gard spout assembly 20 Drain screw 21 Side panel (specify color) 22 Front panel (specify color) 23 Hanger bracket SUNROC (6) (9) (12) (14) (17) (19) (19) 13-61

62 SUNROC WALL-MOUNTED WATER COOLER MODEL NWCA-5, NWCA-5F, NWCA-8, NWCA-8F 1 Tecumseh compressor NWCA-8 30 Front push bar suntan Tecumseh overload NWCA-8 NLA Front push bar chrome Tecumseh relay NWCA Front push bar gray Tecumseh compressor NWCA-5 31 Screws for front push bar Tecumseh overload NWCA Spacers Tecumseh relay NWCA-5 33 Screws for side push bar Compressor Spacers (uses Spade connection) 35 Handle frame Relay (uses Spade connection) Overload (uses Spade connection) 36 Extension spring 2 Condenser 3 Fan motor Fan motor (uses Spade connection) 4 Fan blade 5 Wiring harness Wiring harness (uses Spade connection) 6 Drier Capillary tube Cold thermostat (uses Spade connection) Cold thermostat 8 Drain Drain washer 10 Drain screw Cobra spout (metal) Safety-Gard spout assembly 12 Spring washer 13 Hex-head nut 14 Water-control assembly Cartridge Retainer nut "Y" strainer 18 Evaporator 19 Stainless-steel top 20 Stainless-steel screws 21 Hole cover 22 Hanger bracket 23 Left-side panel (specify color) 24 Right-side panel (specify color) 25 Front panel (specify color) 26 Bottom panel 27 Complete apron assembly (specify color) 28 Left-side bar suntan Left-side bar gray Left-side bar chrome Right-side push bar suntan Right-side push bar gray (17) Right-side push bar chrome (9) (11) (11) (15) (16) (34) 13-62